rtl8812au

Realtek 8812AU/8821AU USB WiFi driver.

for AC1200 (801.11ac) Wireless Dual-Band USB Adapter

This code is base on version 4.3.14 from https://github.com/diederikdehaas/rtl8812AU

Update for NVidia Jestson Nano support

This code was forked from https://github.com/abperiasamy/rtl8812AU_8821AU_linux

Known Supported Devices:

* COMFAST 1200Mbps USB Wireless Adapter(Model: CF-912AC)
* TP-LINK AC1200 Wireless Dual Band USB Adapter(Model: Archer-T4U)
* TP-LINK AC600 Wireless Dual Band USB Adapter(Model: Archer-T2U Nano)

Compiling with DKMS

# sudo make -f Makefile.dkms install

Compiling for NVidia Jeston Nano

# CONFIG_PLATFORM_ARM_JET_NANO = y

Compiling for Raspberry Pi (3)

Install kernel headers and other dependencies.

# sudo apt-get install linux-image-rpi-rpfv linux-headers-rpi-rpfv raspberrypi-kernel-headers dkms build-essential bc

Install kernel headers: https://github.com/notro/rpi-source/wiki

sudo wget https://raw.githubusercontent.com/notro/rpi-source/master/rpi-source -O /usr/local/bin/rpi-source && sudo chmod +x /usr/local/bin/rpi-source && /usr/local/bin/rpi-source -q --tag-update
rpi-source

Edit Makefile and turn on CONFIG_PLATFORM_ARM_RPI, turn off CONFIG_PLATFORM_I386_PC

CONFIG_PLATFORM_I386_PC = n
CONFIG_PLATFORM_ARM_RPI = y

# cd /usr/src/rtl8812au
# sudo make clean
# sudo make -j4
# sudo make install
# sudo modprobe -a rtl8812au

Compiling for Ubuntu (16.04) and Debian (9)

Download archive into temp directory

# mkdir -p /tmp/t4u
# cd /tmp/t4u
# wget https://github.com/abperiasamy/rtl8812AU_8821AU_linux/archive/master.zip

Unzip

# unzip master.zip
# cd rtl8812AU_8821AU_linux-master

Install kernel headers

# sudo apt install linux-headers-$(uname -r)

Compile and install from source

# make
# sudo make install

Load module

# sudo modprobe -a rtl8812au

Cross-compiling. You can now specify variables on the command line w/out editing

makefile. For instance, this builds against recent OpenWRT neo2 platform. Your

Cross-compile binaries should be in your PATH.

KSRC=/home/greearb/git/openwrt-neo2-dev/build_dir/target-aarch64_cortex-a53_musl/linux-sunxi_cortexa53/linux-4.14.78 EXT_EXTRA_CFLAGS=-DCONFIG_LITTLE_ENDIAN ARCH=arm64 CROSS_COMPILE=aarch64-openwrt-linux- MODDESTDIR=/tmp make V=1

Setup DKMS

# sudo apt-get update
# sudo apt-get install dkms
# cd /tmp/t4u/rtl8812AU_8821AU_linux-master/
# sudo cp -R . /usr/src/rtl8812AU_8821AU_linux-1.0
# sudo dkms add -m rtl8812AU_8821AU_linux -v 1.0
# sudo dkms build -m rtl8812AU_8821AU_linux -v 1.0
# sudo dkms install -m rtl8812AU_8821AU_linux -v 1.0

Contributors

• Anand Babu (AB) Periasamy
• Andreas Hofmann
• Andrew Mann
• AndyPi
• Anton
• archshift
• bits3rpent
• Chen Minqiang
• Daiki Tamada
• Fjodor42
• gremsto
• HackDefendr
• Harshavardhana
• jjones-jr
• Joe
• Joe Acosta
• John Lenz
• Jos Dehaes
• Karl-Philipp Richter
• Marco Milanesi
• Mauro Ribeiro
• Maximilian Schwerin
• mpoly
• Nick Bartos
• Peter H. Li
• pgroenbech
• scrivy
• Taehan Stott
• Vicent Llongo
• Victor Azizi
• 赵迤晨 (Zhao, Yichen)