add ssd1683, update ssd1680z

adafruit_epd/ssd1680.py

@@ -242,7 +242,7 @@ def power_up(self):
 
         self.command(
             _SSD1680_DRIVER_CONTROL,
-            bytearray([self._height, (self._height) >> 8, 0x00]),
+            bytearray([self._height & 0xFF, (self._height) >> 8, 0x00]),
         )
         self.command(_SSD1680_DATA_MODE, bytearray([0x03]))
 
@@ -251,19 +251,19 @@ def power_up(self):
         self.command(_SSD1680_GATE_VOLTAGE, bytearray([0x17]))
         self.command(_SSD1680_SOURCE_VOLTAGE, bytearray([0x41, 0x00, 0x32]))
 
-        self.command(_SSD1680_SET_RAMXPOS, bytearray([0x00, (self._width // 8)]))
+        self.command(_SSD1680_SET_RAMXPOS, bytearray([0x00, (self._width // 8) - 1]))
         self.command(
             _SSD1680_SET_RAMYPOS,
-            bytearray([0x00, 0x00, self._height, (self._height) >> 8]),
+            bytearray([0x00, 0x00, (self._height - 1) & 0xFF, (self._height - 1) >> 8]),
         )
 
         # Set border waveform
         self.command(_SSD1680_WRITE_BORDER, bytearray([0x05]))
 
         # Set ram X count
-        self.command(_SSD1680_SET_RAMXCOUNT, bytearray([0x01]))
+        self.command(_SSD1680_SET_RAMXCOUNT, bytearray([0x00]))
         # Set ram Y count
-        self.command(_SSD1680_SET_RAMYCOUNT, bytearray([self._height, 0]))
+        self.command(_SSD1680_SET_RAMYCOUNT, bytearray([0x00, 0x00]))
         self.busy_wait()
 
     def update(self):

adafruit_epd/ssd1683.py

@@ -0,0 +1,262 @@
+# SPDX-FileCopyrightText: 2025 Liz Clark for Adafruit Industries
+#
+# SPDX-License-Identifier: MIT
+
+"""
+`adafruit_epd.ssd1683` - Adafruit SSD1683 - ePaper display driver
+====================================================================================
+CircuitPython driver for Adafruit SSD1683 display breakouts
+* Author(s): Liz Clark
+"""
+
+import time
+
+import adafruit_framebuf
+from micropython import const
+
+from adafruit_epd.epd import Adafruit_EPD
+
+try:
+    """Needed for type annotations"""
+    import typing
+
+    from busio import SPI
+    from digitalio import DigitalInOut
+    from typing_extensions import Literal
+
+except ImportError:
+    pass
+
+__version__ = "0.0.0+auto.0"
+__repo__ = "https://github.com/adafruit/Adafruit_CircuitPython_EPD.git"
+
+# Command constants
+_SSD1683_DRIVER_CONTROL = const(0x01)
+_SSD1683_GATE_VOLTAGE = const(0x03)
+_SSD1683_SOURCE_VOLTAGE = const(0x04)
+_SSD1683_PROGOTP_INITIAL = const(0x08)
+_SSD1683_PROGREG_INITIAL = const(0x09)
+_SSD1683_READREG_INITIAL = const(0x0A)
+_SSD1683_BOOST_SOFTSTART = const(0x0C)
+_SSD1683_DEEP_SLEEP = const(0x10)
+_SSD1683_DATA_MODE = const(0x11)
+_SSD1683_SW_RESET = const(0x12)
+_SSD1683_HV_READY = const(0x14)
+_SSD1683_VCI_DETECT = const(0x15)
+_SSD1683_PROGRAM_WSOTP = const(0x16)
+_SSD1683_PROGRAM_AUTO = const(0x17)
+_SSD1683_TEMP_CONTROL = const(0x18)
+_SSD1683_TEMP_WRITE = const(0x1A)
+_SSD1683_TEMP_READ = const(0x1B)
+_SSD1683_TEMP_CONTROLEXT = const(0x1C)
+_SSD1683_MASTER_ACTIVATE = const(0x20)
+_SSD1683_DISP_CTRL1 = const(0x21)
+_SSD1683_DISP_CTRL2 = const(0x22)
+_SSD1683_WRITE_RAM1 = const(0x24)
+_SSD1683_WRITE_RAM2 = const(0x26)
+_SSD1683_READ_RAM1 = const(0x27)
+_SSD1683_SENSE_VCOM = const(0x28)
+_SSD1683_SENSEDUR_VCOM = const(0x29)
+_SSD1683_PROGOTP_VCOM = const(0x2A)
+_SSD1683_WRITE_VCOM = const(0x2C)
+_SSD1683_READ_OTP = const(0x2D)
+_SSD1683_READ_USERID = const(0x2E)
+_SSD1683_READ_STATUS = const(0x2F)
+_SSD1683_WRITE_LUT = const(0x32)
+_SSD1683_WRITE_BORDER = const(0x3C)
+_SSD1683_END_OPTION = const(0x3F)
+_SSD1683_SET_RAMXPOS = const(0x44)
+_SSD1683_SET_RAMYPOS = const(0x45)
+_SSD1683_SET_RAMXCOUNT = const(0x4E)
+_SSD1683_SET_RAMYCOUNT = const(0x4F)
+
+# Other constants
+_EPD_RAM_BW = const(0x10)
+_EPD_RAM_RED = const(0x13)
+_BUSY_WAIT = const(500)
+
+
+class Adafruit_SSD1683(Adafruit_EPD):
+    """driver class for Adafruit SSD1683 ePaper display breakouts"""
+
+    def __init__(
+        self,
+        width: int,
+        height: int,
+        spi: SPI,
+        *,
+        cs_pin: DigitalInOut,
+        dc_pin: DigitalInOut,
+        sramcs_pin: DigitalInOut,
+        rst_pin: DigitalInOut,
+        busy_pin: DigitalInOut,
+    ) -> None:
+        super().__init__(width, height, spi, cs_pin, dc_pin, sramcs_pin, rst_pin, busy_pin)
+
+        stride = width
+        if stride % 8 != 0:
+            stride += 8 - stride % 8
+
+        self._buffer1_size = int(stride * height / 8)
+        self._buffer2_size = self._buffer1_size
+
+        if sramcs_pin:
+            self._buffer1 = self.sram.get_view(0)
+            self._buffer2 = self.sram.get_view(self._buffer1_size)
+        else:
+            self._buffer1 = bytearray(self._buffer1_size)
+            self._buffer2 = bytearray(self._buffer2_size)
+
+        self._framebuf1 = adafruit_framebuf.FrameBuffer(
+            self._buffer1, width, height, buf_format=adafruit_framebuf.MHMSB
+        )
+        self._framebuf2 = adafruit_framebuf.FrameBuffer(
+            self._buffer2, width, height, buf_format=adafruit_framebuf.MHMSB
+        )
+        self.set_black_buffer(0, True)
+        self.set_color_buffer(1, False)
+
+        # Set single byte transactions flag
+        self._single_byte_tx = True
+
+        # Set the display update value
+        self._display_update_val = 0xF7
+
+        # Default initialization sequence (tri-color mode)
+        self._default_init_code = bytes(
+            [
+                _SSD1683_SW_RESET,
+                0,  # Software reset
+                0xFF,
+                50,  # Wait for busy (50ms delay)
+                _SSD1683_WRITE_BORDER,
+                1,  # Border waveform control
+                0x05,  # Border color/waveform
+                _SSD1683_TEMP_CONTROL,
+                1,  # Temperature control
+                0x80,  # Read temp
+                _SSD1683_DATA_MODE,
+                1,  # Data entry mode
+                0x03,  # Y decrement, X increment
+                0xFE,  # End of initialization
+            ]
+        )
+
+    def begin(self, reset: bool = True) -> None:
+        """Begin communication with the display and set basic settings"""
+        if reset:
+            self.hardware_reset()
+        self.power_down()
+
+    def busy_wait(self) -> None:
+        """Wait for display to be done with current task, either by polling the
+        busy pin, or pausing"""
+        if self._busy:
+            while self._busy.value:  # wait for busy low
+                time.sleep(0.01)
+        else:
+            time.sleep(_BUSY_WAIT / 1000.0)  # Convert ms to seconds
+
+    def power_up(self) -> None:
+        """Power up the display in preparation for writing RAM and updating"""
+        self.hardware_reset()
+        time.sleep(0.1)
+        self.busy_wait()
+
+        # Use custom init code if provided, otherwise use default
+        init_code = self._default_init_code
+        if hasattr(self, "_epd_init_code") and self._epd_init_code is not None:
+            init_code = self._epd_init_code
+
+        # Send initialization sequence
+        self._send_command_list(init_code)
+
+        # Set RAM window
+        self.set_ram_window(0, 0, (self._width // 8) - 1, self._height - 1)
+
+        # Set RAM address to start position
+        self.set_ram_address(0, 0)
+
+        # Set LUT if we have one
+        if hasattr(self, "_epd_lut_code") and self._epd_lut_code:
+            self._send_command_list(self._epd_lut_code)
+
+        # Set display size and driver output control
+        _b0 = (self._height - 1) & 0xFF
+        _b1 = ((self._height - 1) >> 8) & 0xFF
+        _b2 = 0x00
+        self.command(_SSD1683_DRIVER_CONTROL, bytearray([_b0, _b1, _b2]))
+
+    def power_down(self) -> None:
+        """Power down the display - required when not actively displaying!"""
+        # Only deep sleep if we can get out of it
+        if self._rst:
+            # deep sleep
+            self.command(_SSD1683_DEEP_SLEEP, bytearray([0x01]))
+            time.sleep(0.1)
+        else:
+            self.command(_SSD1683_SW_RESET)
+            self.busy_wait()
+
+    def update(self) -> None:
+        """Update the display from internal memory"""
+        # display update sequence
+        self.command(_SSD1683_DISP_CTRL2, bytearray([self._display_update_val]))
+        self.command(_SSD1683_MASTER_ACTIVATE)
+        self.busy_wait()
+
+        if not self._busy:
+            time.sleep(1)  # wait 1 second
+
+    def write_ram(self, index: Literal[0, 1]) -> int:
+        """Send the one byte command for starting the RAM write process. Returns
+        the byte read at the same time over SPI. index is the RAM buffer, can be
+        0 or 1 for tri-color displays."""
+        if index == 0:
+            return self.command(_SSD1683_WRITE_RAM1, end=False)
+        if index == 1:
+            return self.command(_SSD1683_WRITE_RAM2, end=False)
+        raise RuntimeError("RAM index must be 0 or 1")
+
+    def set_ram_address(self, x: int, y: int) -> None:
+        """Set the RAM address location"""
+        # set RAM x address count
+        self.command(_SSD1683_SET_RAMXCOUNT, bytearray([x & 0xFF]))
+
+        # set RAM y address count
+        self.command(_SSD1683_SET_RAMYCOUNT, bytearray([y & 0xFF, (y >> 8) & 0xFF]))
+
+    def set_ram_window(self, x1: int, y1: int, x2: int, y2: int) -> None:
+        """Set the RAM window for partial updates"""
+        # Set ram X start/end position
+        self.command(_SSD1683_SET_RAMXPOS, bytearray([x1 & 0xFF, x2 & 0xFF]))
+
+        # Set ram Y start/end position
+        self.command(
+            _SSD1683_SET_RAMYPOS,
+            bytearray([y1 & 0xFF, (y1 >> 8) & 0xFF, y2 & 0xFF, (y2 >> 8) & 0xFF]),
+        )
+
+    def _send_command_list(self, init_sequence: bytes) -> None:
+        """Send a sequence of commands from an initialization list"""
+        i = 0
+        while i < len(init_sequence):
+            cmd = init_sequence[i]
+            i += 1
+
+            if cmd == 0xFE:  # End marker
+                break
+            elif cmd == 0xFF:  # Delay marker
+                if i < len(init_sequence):
+                    delay_ms = init_sequence[i]
+                    i += 1
+                    time.sleep(delay_ms / 1000.0)
+            elif i < len(init_sequence):
+                num_args = init_sequence[i]
+                i += 1
+                if num_args > 0 and (i + num_args) <= len(init_sequence):
+                    args = init_sequence[i : i + num_args]
+                    self.command(cmd, bytearray(args))
+                    i += num_args
+                else:
+                    self.command(cmd)

examples/epd_bitmap.py

@@ -14,6 +14,7 @@
 from adafruit_epd.ssd1675 import Adafruit_SSD1675
 from adafruit_epd.ssd1680 import Adafruit_SSD1680
 from adafruit_epd.ssd1681 import Adafruit_SSD1681
+from adafruit_epd.ssd1683 import Adafruit_SSD1683
 from adafruit_epd.uc8151d import Adafruit_UC8151D
 
 # create the spi device and pins we will need
@@ -36,6 +37,7 @@
 # display = Adafruit_UC8151D(128, 296,        # 2.9" mono flexible display
 # display = Adafruit_IL0373(128, 296,         # 2.9" Tri-color display IL0373
 # display = Adafruit_SSD1680(128, 296,        # 2.9" Tri-color display SSD1680
+# display = Adafruit_SSD1683(400, 300,        # 4.2" 300x400 Tri-Color display
 # display = Adafruit_IL0398(400, 300,         # 4.2" Tri-color display
 display = Adafruit_IL0373(
     104,

examples/epd_blinka.py

@@ -17,6 +17,7 @@
 from adafruit_epd.ssd1675b import Adafruit_SSD1675B
 from adafruit_epd.ssd1680 import Adafruit_SSD1680
 from adafruit_epd.ssd1681 import Adafruit_SSD1681
+from adafruit_epd.ssd1683 import Adafruit_SSD1683
 from adafruit_epd.uc8151d import Adafruit_UC8151D
 
 # create the spi device and pins we will need
@@ -35,6 +36,7 @@
 # display = Adafruit_SSD1680(122, 250,        # 2.13" HD Tri-color display
 # display = Adafruit_SSD1681(200, 200,        # 1.54" HD Tri-color display
 # display = Adafruit_SSD1675(122, 250,        # 2.13" HD mono display
+# display = Adafruit_SSD1683(400, 300,        # 4.2" 300x400 Tri-Color display
 # display = Adafruit_IL91874(176, 264,        # 2.7" Tri-color display
 # display = Adafruit_EK79686(176, 264,        # 2.7" Tri-color display
 # display = Adafruit_IL0373(152, 152,         # 1.54" Tri-color display

examples/epd_pillow_demo.py

@@ -20,6 +20,7 @@
 from adafruit_epd.ssd1675 import Adafruit_SSD1675
 from adafruit_epd.ssd1680 import Adafruit_SSD1680, Adafruit_SSD1680Z
 from adafruit_epd.ssd1681 import Adafruit_SSD1681
+from adafruit_epd.ssd1683 import Adafruit_SSD1683
 from adafruit_epd.uc8151d import Adafruit_UC8151D
 
 # First define some color constants
@@ -49,6 +50,7 @@
 # display = Adafruit_SSD1680(122, 250,        # 2.13" HD Tri-color or mono display
 # display = Adafruit_SSD1680Z(122, 250,       # Newer 2.13" mono display
 # display = Adafruit_SSD1681(200, 200,        # 1.54" HD Tri-color display
+# display = Adafruit_SSD1683(400, 300,        # 4.2" 300x400 Tri-Color display
 # display = Adafruit_IL91874(176, 264,        # 2.7" Tri-color display
 # display = Adafruit_EK79686(176, 264,        # 2.7" Tri-color display
 # display = Adafruit_IL0373(152, 152,         # 1.54" Tri-color display

examples/epd_pillow_image.py

@@ -22,6 +22,7 @@
 from adafruit_epd.ssd1675 import Adafruit_SSD1675
 from adafruit_epd.ssd1680 import Adafruit_SSD1680, Adafruit_SSD1680Z
 from adafruit_epd.ssd1681 import Adafruit_SSD1681
+from adafruit_epd.ssd1683 import Adafruit_SSD1683
 from adafruit_epd.uc8151d import Adafruit_UC8151D
 
 # create the spi device and pins we will need
@@ -39,6 +40,7 @@
 # display = Adafruit_SSD1680(122, 250,        # 2.13" HD Tri-color or mono display
 # display = Adafruit_SSD1680Z(122, 250,       # Newer 2.13" mono display
 # display = Adafruit_SSD1681(200, 200,        # 1.54" HD Tri-color display
+# display = Adafruit_SSD1683(400, 300,        # 4.2" 300x400 Tri-Color display
 # display = Adafruit_IL91874(176, 264,        # 2.7" Tri-color display
 # display = Adafruit_EK79686(176, 264,        # 2.7" Tri-color display
 # display = Adafruit_IL0373(152, 152,         # 1.54" Tri-color display

examples/epd_simpletest.py

@@ -15,6 +15,7 @@
 from adafruit_epd.ssd1675 import Adafruit_SSD1675
 from adafruit_epd.ssd1680 import Adafruit_SSD1680, Adafruit_SSD1680Z
 from adafruit_epd.ssd1681 import Adafruit_SSD1681
+from adafruit_epd.ssd1683 import Adafruit_SSD1683
 from adafruit_epd.uc8151d import Adafruit_UC8151D
 
 # create the spi device and pins we will need
@@ -33,6 +34,7 @@
 # display = Adafruit_SSD1680(122, 250,        # 2.13" HD Tri-color display
 # display = Adafruit_SSD1681(200, 200,        # 1.54" HD Tri-color display
 # display = Adafruit_SSD1681(200, 200,        # 1.54" HD Tri-color display
+# display = Adafruit_SSD1683(400, 300,        # 4.2" 300x400 Tri-Color display
 # display = Adafruit_IL91874(176, 264,        # 2.7" Tri-color display
 # display = Adafruit_EK79686(176, 264,        # 2.7" Tri-color display
 # display = Adafruit_IL0373(152, 152,         # 1.54" Tri-color display