Skip to content

Components i use on my PCB Designs

Jump to bottom
Miguel Tomas Silva edited this page Aug 15, 2024 · 12 revisions

Navigation | AeonLabs Main Index >> Main Page - Open Hardware Electronics >> Open Hardware Electronics Wiki >> Components i use on my PCB Designs

In here one will find the following kind of components

CPUs

EDGE AI-enabled CPUs


MCUs

  • Tensilica LX6 Dual core 240 Mhz

  • Tensilica LX7 Dual Core 240 Mhz

    • ESP32-S3
    • ESP32-S3R2
    • ESP32-S3R8V
    • ESP32-S3R8
    • ESP32-S3FN8
    • ESP32-S3FH4R2

  • Atmel

    • AT5 SAM D21

  • Goodix

    • GR551x. ARM® Cortex®-M4F 32-bit micro-processor with floating point support up to 64 MHz.

  • Zhuhai Jieli Technology

    • ac6963a 32-bit DSP supports hardware Float Point Unit (FPU) up to 160MHz

  • Realtek

    • RTL8762D ARM Cortex-M4 max frequency 90MHz.
    • RTL8762DGF ░ ░ ░ ░90MHz ░ BT5.1 ░ 512KB ░░ 18 IO ░ QFN32 5x5
    • RTL8762DGF-VS ░ ░ 90MHz ░ BT5.1 ░ 1024KB ░ 18 IO ░ QFN32 5x5
    • RTL8762DKF ░ ░ ░░ 90MHz ░ BT5.1 ░ 512KB ░ 34 IO ░ QFN48 6x6
    • RTL8762DKF-VS ░ ░ 90MHz ░ BT5.1 ░ 1024KB ░ 34 IO ░ QFN48 6x6
    • RTL8762DWF ░ ░ ░ 90MHz ░ BT5.1 ░ 1024KB ░ 40 IO ░ QFN56 7x7
    • RTL8762DDF ░ ░ ░░ 60MHz ░ BT5.1 ░ 512KB ░ 26 IO ░ QFN40 5x5
    • RTL8762DK ░ ░ ░ ░ 90MHz ░ BT5.1 ░░ -- ░ ░ ░32 IO ░ QFN48 6x6
    • RTL8762DT ░ ░ ░ ░ 90MHz ░ BT5.1 ░░ -- ░ ░ ░38 IO ░ QFN56 7x7
    • RTL8762DW

  • Renesas

    • DA14683 ARM® Cortex®-M0 CPU delivering up to 86 DMIPS (at maximum 96 MHz system speed). Application cryptographic engine with ECC, AES256, SHA-1, SHA-256, SHA-512 and True Random Number Generator

UWB Modules

  • HS6621

Authentication & Security

  • SOIC-8 ATSHA204A SHA-256 high-security hardware authentication IC for secure and unique data exchange

Storage (Smart Edge Storage)


Memory


Wired Connectivity


Sensors & Sensing

  • Health and Wellbeing
    • AD8232 for Measuremrnts of Bio compatible Electromagentic fields (Heart rate, ECG, wireless attack detection for Home security)
    • Heart rate sensor HRS3300 datasheet



Robotics


Displays


Authentication

  • RFID NFC, RFID UHF

Connectivity

  • GSM LTE 4G (SIM7000E)
  • WIFI 2.4Ghz , 5.0Ghz
  • Bluetooth 4.2, 5.x BLE beacon
  • 2.4Ghz RF Transmitters/ Receivers

Power Management

  • Linear regulators
    • AMS1117
      • AMS1117-1.2V
      • AMS1117-1.5V
      • AMS1117-1.8V
      • AMS1117-2.5V
      • AMS1117-3.3V
      • AMS1117-5.0V
      • AMS1117-ADJ
    • ZLDO1117G50TA





  • AC DC converters
    • 8W 18W 25W 36W 50W Transformer
    • HLK PMxx
      • HLK-PM12 (12V 3W)
      • HLK-PM03 (3.3V 3W)
      • HLK-PM24(24V 3W)
      • HLK-2M03(3.3V 2W)
      • HLK-PM01 (5V 3W)
      • HLK-2M05(5V 2W)
      • HLK-2M09(9V 2W)
      • HLK-2M12(12V 2W)
      • HLK-5M03(3.3V 5W)
      • HLK-5M05(5V 5W)
      • HLK-5M09(9V 5W)
      • HLK-5M012(12V 5W)
      • HLK-5M24(24V 5W)


Legend used in all AeonLabs repositories

🟢 Fully tested and working
A green circle means the hardware electronics or the programming code was fully tested, each of its functionalities and capabilities. And it can be installed in a vehicle. Keep in mind this does not mean errors won't happen. As in everything related to electronics and software, there are revisions and updates. This open hardware is no different.
    💯 Fully tested & working, no improvements necessary - already being sold online
    🆓 Fully Open hardware \ source code
    🤪 There's better than this. don't use it
    🔐 Fully closed hardware \ source code
    ⚠️ it can be improved.
    ⚡️ fully tested and working, however, it is a dangerous solution to deploy

🟡 Not tested. Working capability is unknown, it may work or not.
A yellow circle means the hardware electronics or the programming code was not fully tested, each of its functionalities and capabilities. This does not mean it not working, it simply means testing is needed before giving a green circle of approval.

🔴 Fully tested but not working.
A red circle means the hardware electronics or the programming code was fully tested, and found some kind of critical error or fault. This means the electronics or firmware code cannot be used in a vehicle.

⌛ Not started.
The hourglass means the hardware electronics or the programming hasn't started. Most likely because is waiting for the necessary test components needed for reverse engineering and also engineering of the new open solution.

🆕 New updated contents
The new icon means the link next to it was recently updated with new contents

💬 Comments on the Discussion page
The comments icon means there are useful and even new comments on the discussions page of the repository important for what you are seeing or reading.

Be supportive of my dedication and work towards open hardware and buy me a cup of coffee. Links below. Above and on the side

Don't forget to LIKE, SHARE and subscribe the free chat groups and if you downloaded one of AeonLabs's PCBs consider sponsor any open hardware project with a donation or a cup of coffee. Links on the top, right side pane, and below.

Q&A WhatsApp/Telegram Groups

Subscribe to the WhatsApp or Telegram channel to get the latest information about any of these KiCad projects and get help. Or simply like this kind of project and want to stay updated with the latest research ideas and prototypes during the day and week. Telegram WhatsApp

Useful Utilities

One can find here useful utilities to use when designing and prototyping pcb electronics. For instance a simple Excel spreadsheet with a resistance divider finder compatible with all sold on aliexpress. Click on the Excel logo to the left to get them!

Youtube Channel

Subscribe to my Youtube channel for PCB assembly instruction or any other related to Artificial Intelligence, Smart devices and robotics. Link to the channel here. My most recent video is ....

Author

You can get in touch with me on my LinkedIn Profile:

Miguel Tomas : LinkedIn Link

You can also follow my GitHub Profile to stay updated about my latest projects: GitHub Follow

Be supportive of my dedication and work towards technology education and buy me a cup of coffee

The PCB design Files I provide here for anyone to use are free. If you like this Smart Device or use it, please consider buying me a cup of coffee, a slice of pizza, or a book to help me study, eat, and think new PCB design files.

Make a donation on PayPal

Make a donation on PayPal and get a TAX refund*.

Support all these open hardware projects and become a GitHub sponsor

Did you like any of my PCB KiCad Designs? Help and Support my open work to all by becoming a GitHub sponsor.

License

Before proceeding to download any of AeonLab's open-source code for software solutions and/or open hardware electronics for smart devices and data acquisition make sure you are choosing the right license for your project. See AeonLabs Solutions for Open Hardware & Open Source Code for more information. For commercial business solutions contact AeonLabs ℹ️ using the contacts above. Thank you 🙏.

Clone this wiki locally