Temperature and Humidity Logger using SHT15 written in Python 3 (MicroPython for the PyBoard 1.1).
These instructions will get you a copy of the project up and running on your local machine for development and testing purposes. See deployment for notes on how to deploy the project on a live system.
- Sensirion SHT15 Sensor (others probably work too)
- pyboard v1.1 (other MicroPython boards should work with some adjustments)
| pyboard | SHT15 |
|---|---|
| Y5 | GND |
| Y6 | SCK |
| Y7 | DATA |
| Y8 | VCC |
I recommend to also connect VBACK (P6) to a backup battery. This makes sure that the RTC keeps time when disconnecting the board and connecting it someplace else.
Copy main.py and lib/sht15.py on a SD-card and plug it into the board or the internal flash (via USB).
The logger uses the RTC to write down when the measurement has been taken. Make sure to set date and time correctly:
from pyb import RTC
rtc = RTC()
rtc.datetime((2019, 6, 12, 3, 8, 49, 20, 0)) # y, m, d, weekday, h, m s, ms
rtc.datetime()- MicroPython
- SHT15 - SHT15 breakout board
- upython-aq-monitor - sht1x.py
This project is licensed under the MIT License - see the LICENSE file for details