Skip to content

Commit

Permalink
✨ source-monday: migrate to poetry (#35146)
Browse files Browse the repository at this point in the history
  • Loading branch information
@alafanechere @xiaohansong
alafanechere authored and xiaohansong committed Feb 27, 2024
1 parent 4979dad commit 3d0117b
Show file tree
Hide file tree
Showing 6 changed files with 1,106 additions and 170 deletions.
165 changes: 42 additions & 123 deletions airbyte-integrations/connectors/source-monday/README.md
View file
Original file line number Diff line number Diff line change
@@ -1,172 +1,91 @@
# Monday Source
# Monday source connector


This is the repository for the Monday source connector, written in Python.
For information about how to use this connector within Airbyte, see [the documentation](https://docs.airbyte.io/integrations/sources/monday).
For information about how to use this connector within Airbyte, see [the documentation](https://docs.airbyte.com/integrations/sources/monday).

## Local development

### Prerequisites
* Python (~=3.9)
* Poetry (~=1.7) - installation instructions [here](https://python-poetry.org/docs/#installation)

**To iterate on this connector, make sure to complete this prerequisites section.**

#### Minimum Python version required `= 3.7.0`

#### Build & Activate Virtual Environment and install dependencies

From this connector directory, create a virtual environment:

### Installing the connector
From this connector directory, run:
```bash
python -m venv .venv
poetry install --with dev
```

This will generate a virtualenv for this module in `.venv/`. Make sure this venv is active in your
development environment of choice. To activate it from the terminal, run:

```bash
source .venv/bin/activate
pip install -r requirements.txt
pip install '.[tests]'
```

If you are in an IDE, follow your IDE's instructions to activate the virtualenv.

Note that while we are installing dependencies from `requirements.txt`, you should only edit `setup.py` for your dependencies. `requirements.txt` is
used for editable installs (`pip install -e`) to pull in Python dependencies from the monorepo and will call `setup.py`.
If this is mumbo jumbo to you, don't worry about it, just put your deps in `setup.py` but install using `pip install -r requirements.txt` and everything
should work as you expect.

#### Create credentials

**If you are a community contributor**, follow the instructions in the [documentation](https://docs.airbyte.io/integrations/sources/monday)
to generate the necessary credentials. Then create a file `secrets/config.json` conforming to the `source_monday/spec.json` file.
### Create credentials
**If you are a community contributor**, follow the instructions in the [documentation](https://docs.airbyte.com/integrations/sources/monday)
to generate the necessary credentials. Then create a file `secrets/config.json` conforming to the `source_monday/spec.yaml` file.
Note that any directory named `secrets` is gitignored across the entire Airbyte repo, so there is no danger of accidentally checking in sensitive information.
See `integration_tests/sample_config.json` for a sample config file.
See `sample_files/sample_config.json` for a sample config file.

**If you are an Airbyte core member**, copy the credentials in Lastpass under the secret name `source monday test creds`
and place them into `secrets/config.json`.

### Locally running the connector

```bash
python main.py spec
python main.py check --config secrets/config.json
python main.py discover --config secrets/config.json
python main.py read --config secrets/config.json --catalog integration_tests/configured_catalog.json
```

### Locally running the connector docker image

#### Use `airbyte-ci` to build your connector

The Airbyte way of building this connector is to use our `airbyte-ci` tool.
You can follow install instructions [here](https://github.com/airbytehq/airbyte/blob/master/airbyte-ci/connectors/pipelines/README.md#L1).
Then running the following command will build your connector:

```bash
airbyte-ci connectors --name=source-monday build
poetry run source-monday spec
poetry run source-monday check --config secrets/config.json
poetry run source-monday discover --config secrets/config.json
poetry run source-monday read --config secrets/config.json --catalog sample_files/configured_catalog.json
```

Once the command is done, you will find your connector image in your local docker registry: `airbyte/source-monday:dev`.

##### Customizing our build process

When contributing on our connector you might need to customize the build process to add a system dependency or set an env var.
You can customize our build process by adding a `build_customization.py` module to your connector.
This module should contain a `pre_connector_install` and `post_connector_install` async function that will mutate the base image and the connector container respectively.
It will be imported at runtime by our build process and the functions will be called if they exist.

Here is an example of a `build_customization.py` module:

```python
from __future__ import annotations

from typing import TYPE_CHECKING

if TYPE_CHECKING:
# Feel free to check the dagger documentation for more information on the Container object and its methods.
# https://dagger-io.readthedocs.io/en/sdk-python-v0.6.4/
from dagger import Container


async def pre_connector_install(base_image_container: Container) -> Container:
return await base_image_container.with_env_variable("MY_PRE_BUILD_ENV_VAR", "my_pre_build_env_var_value")

async def post_connector_install(connector_container: Container) -> Container:
return await connector_container.with_env_variable("MY_POST_BUILD_ENV_VAR", "my_post_build_env_var_value")
### Running unit tests
To run unit tests locally, from the connector directory run:
```

#### Build your own connector image

This connector is built using our dynamic built process in `airbyte-ci`.
The base image used to build it is defined within the metadata.yaml file under the `connectorBuildOptions`.
The build logic is defined using [Dagger](https://dagger.io/) [here](https://github.com/airbytehq/airbyte/blob/master/airbyte-ci/connectors/pipelines/pipelines/builds/python_connectors.py).
It does not rely on a Dockerfile.

If you would like to patch our connector and build your own a simple approach would be to:

1. Create your own Dockerfile based on the latest version of the connector image.

```Dockerfile
FROM airbyte/source-monday:latest

COPY . ./airbyte/integration_code
RUN pip install ./airbyte/integration_code

# The entrypoint and default env vars are already set in the base image
# ENV AIRBYTE_ENTRYPOINT "python /airbyte/integration_code/main.py"
# ENTRYPOINT ["python", "/airbyte/integration_code/main.py"]
poetry run pytest unit_tests
```

Please use this as an example. This is not optimized.

2. Build your image:

### Building the docker image
1. Install [`airbyte-ci`](https://github.com/airbytehq/airbyte/blob/master/airbyte-ci/connectors/pipelines/README.md)
2. Run the following command to build the docker image:
```bash
docker build -t airbyte/source-monday:dev .
# Running the spec command against your patched connector
docker run airbyte/source-monday:dev spec
airbyte-ci connectors --name=source-monday build
```

#### Run
An image will be available on your host with the tag `airbyte/source-monday:dev`.

Then run any of the connector commands as follows:

```bash
### Running as a docker container
Then run any of the connector commands as follows:
```
docker run --rm airbyte/source-monday:dev spec
docker run --rm -v $(pwd)/secrets:/secrets airbyte/source-monday:dev check --config /secrets/config.json
docker run --rm -v $(pwd)/secrets:/secrets airbyte/source-monday:dev discover --config /secrets/config.json
docker run --rm -v $(pwd)/secrets:/secrets -v $(pwd)/integration_tests:/integration_tests airbyte/source-monday:dev read --config /secrets/config.json --catalog /integration_tests/configured_catalog.json
```

## Testing

### Running our CI test suite
You can run our full test suite locally using [`airbyte-ci`](https://github.com/airbytehq/airbyte/blob/master/airbyte-ci/connectors/pipelines/README.md):

```bash
airbyte-ci connectors --name=source-monday test
```

### Customizing acceptance Tests

Customize `acceptance-test-config.yml` file to configure tests. See [Connector Acceptance Tests](https://docs.airbyte.com/connector-development/testing-connectors/connector-acceptance-tests-reference) for more information.
Customize `acceptance-test-config.yml` file to configure acceptance tests. See [Connector Acceptance Tests](https://docs.airbyte.com/connector-development/testing-connectors/connector-acceptance-tests-reference) for more information.
If your connector requires to create or destroy resources for use during acceptance tests create fixtures for it and place them inside integration_tests/acceptance.py.

## Dependency Management

All of your dependencies should go in `setup.py`, NOT `requirements.txt`. The requirements file is only used to connect internal Airbyte dependencies in the monorepo for local development.
We split dependencies between two groups, dependencies that are:

* required for your connector to work need to go to `MAIN_REQUIREMENTS` list.
* required for the testing need to go to `TEST_REQUIREMENTS` list
### Dependency Management
All of your dependencies should be managed via Poetry.
To add a new dependency, run:
```bash
poetry add <package-name>
```

### Publishing a new version of the connector
Please commit the changes to `pyproject.toml` and `poetry.lock` files.

## Publishing a new version of the connector
You've checked out the repo, implemented a million dollar feature, and you're ready to share your changes with the world. Now what?

1. Make sure your changes are passing our test suite: `airbyte-ci connectors --name=source-monday test`
2. Bump the connector version in `metadata.yaml`: increment the `dockerImageTag` value. Please follow [semantic versioning for connectors](https://docs.airbyte.com/contributing-to-airbyte/resources/pull-requests-handbook/#semantic-versioning-for-connectors).
2. Bump the connector version (please follow [semantic versioning for connectors](https://docs.airbyte.com/contributing-to-airbyte/resources/pull-requests-handbook/#semantic-versioning-for-connectors)):
- bump the `dockerImageTag` value in in `metadata.yaml`
- bump the `version` value in `pyproject.toml`
3. Make sure the `metadata.yaml` content is up to date.
4. Make the connector documentation and its changelog is up to date (`docs/integrations/sources/monday.md`).
4. Make sure the connector documentation and its changelog is up to date (`docs/integrations/sources/monday.md`).
5. Create a Pull Request: use [our PR naming conventions](https://docs.airbyte.com/contributing-to-airbyte/resources/pull-requests-handbook/#pull-request-title-convention).
6. Pat yourself on the back for being an awesome contributor.
7. Someone from Airbyte will take a look at your PR and iterate with you to merge it into master.
8. Once your PR is merged, the new version of the connector will be automatically published to Docker Hub and our connector registry.
2 changes: 1 addition & 1 deletion airbyte-integrations/connectors/source-monday/metadata.yaml
View file
Original file line number Diff line number Diff line change
Expand Up @@ -10,7 +10,7 @@ data:
connectorSubtype: api
connectorType: source
definitionId: 80a54ea2-9959-4040-aac1-eee42423ec9b
dockerImageTag: 2.0.1
dockerImageTag: 2.0.2
releases:
breakingChanges:
2.0.0:
Expand Down
Loading

0 comments on commit 3d0117b

Please sign in to comment.