net/mlx5: Fix wrongly assigned CQ reference counter

The kernel compiled with CONFIG_REFCOUNT_FULL produces the following
error. The reason to it that initial value of refcount_t is supposed
to be more than 0, change it.

[    3.106634] ------------[ cut here ]------------
[    3.107756] refcount_t: increment on 0; use-after-free.
[    3.109130] WARNING: CPU: 0 PID: 1 at lib/refcount.c:153 refcount_inc+0x27/0x30
[    3.110085] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.16.0-rc1-00028-gf683e04bdccc torvalds#137
[    3.110085] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014
[    3.110085] RIP: 0010:refcount_inc+0x27/0x30
[    3.110085] RSP: 0000:ffffaa620000fba0 EFLAGS: 00010286
[    3.110085] RAX: 0000000000000000 RBX: ffff9a6d1a1821c8 RCX: ffffffff98a50f48
[    3.110085] RDX: 0000000000000001 RSI: 0000000000000086 RDI: 0000000000000246
[    3.110085] RBP: ffff9a6d1ac800a0 R08: 0000000000000289 R09: 000000000000000a
[    3.110085] R10: fffff03bc0682840 R11: ffffffff9949856d R12: ffff9a6d1b4a4000
[    3.110085] R13: 0000000000000000 R14: ffff9a6d1a0a6c00 R15: ffffaa620000fc5c
[    3.110085] FS:  0000000000000000(0000) GS:ffff9a6d1fc00000(0000) knlGS:0000000000000000
[    3.110085] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    3.110085] CR2: 0000000000000000 CR3: 000000000ba0a000 CR4: 00000000000006b0
[    3.110085] Call Trace:
[    3.110085]  mlx5_core_create_cq+0xde/0x250
[    3.110085]  ? __kmalloc+0x1ce/0x1e0
[    3.110085]  mlx5e_create_cq+0x15c/0x1e0
[    3.110085]  mlx5e_open_drop_rq+0xea/0x190
[    3.110085]  mlx5e_attach_netdev+0x53/0x140
[    3.110085]  mlx5e_attach+0x3d/0x60
[    3.110085]  mlx5e_add+0x11d/0x2f0
[    3.110085]  mlx5_add_device+0x77/0x170
[    3.110085]  mlx5_register_interface+0x74/0xc0
[    3.110085]  ? set_debug_rodata+0x11/0x11
[    3.110085]  init+0x67/0x72
[    3.110085]  ? mlx4_en_init_ptys2ethtool_map+0x346/0x346
[    3.110085]  do_one_initcall+0x98/0x147
[    3.110085]  ? set_debug_rodata+0x11/0x11
[    3.110085]  kernel_init_freeable+0x164/0x1e0
[    3.110085]  ? rest_init+0xb0/0xb0
[    3.110085]  kernel_init+0xa/0x100
[    3.110085]  ret_from_fork+0x35/0x40
[    3.110085] Code: 00 00 00 00 e8 ab ff ff ff 84 c0 74 02 f3 c3 80 3d 3b c3 64 01 00 75 f5 48 c7 c7 68 0b 81 98 c6 05 2b c3 64 01 01 e8 79 d7 a3 ff <0f> ff c3 66 0f 1f 44 00 00 8b 06 83 f8 ff 74 39 31 c9 39 f8 89
[    3.110085] ---[ end trace a0068e1c68438a74 ]---

Issue: 1318989
Change-Id: Idcf40a70fb5012429b5cb6bfdd893cd5f4b0e9b5
Fixes: f105b45 ("net/mlx5: CQ hold/put API")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

drivers/net/ethernet/mellanox/mlx5/core/cq.c

@@ -109,8 +109,7 @@ int mlx5_core_create_cq(struct mlx5_core_dev *dev, struct mlx5_core_cq *cq,
 	cq->cons_index = 0;
 	cq->arm_sn     = 0;
 	cq->eq         = eq;
-	refcount_set(&cq->refcount, 0);
-	mlx5_cq_hold(cq);
+	refcount_set(&cq->refcount, 1);
 	init_completion(&cq->free);
 	if (!cq->comp)
 		cq->comp = mlx5_add_cq_to_tasklet;