Merge pull request torvalds#159 from zandrey/5.4-2.2.x-imx

Update 5.4-2.2.x-imx to v5.4.73 from stable

Documentation/admin-guide/kernel-parameters.txt

@@ -567,7 +567,7 @@
 			loops can be debugged more effectively on production
 			systems.
 
-	clearcpuid=BITNUM [X86]
+	clearcpuid=BITNUM[,BITNUM...] [X86]
 			Disable CPUID feature X for the kernel. See
 			arch/x86/include/asm/cpufeatures.h for the valid bit
 			numbers. Note the Linux specific bits are not necessarily

Documentation/networking/ip-sysctl.txt

@@ -1000,12 +1000,14 @@ icmp_ratelimit - INTEGER
 icmp_msgs_per_sec - INTEGER
 	Limit maximal number of ICMP packets sent per second from this host.
 	Only messages whose type matches icmp_ratemask (see below) are
-	controlled by this limit.
+	controlled by this limit. For security reasons, the precise count
+	of messages per second is randomized.
 	Default: 1000
 
 icmp_msgs_burst - INTEGER
 	icmp_msgs_per_sec controls number of ICMP packets sent per second,
 	while icmp_msgs_burst controls the burst size of these packets.
+	For security reasons, the precise burst size is randomized.
 	Default: 50
 
 icmp_ratemask - INTEGER

Makefile

@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 5
 PATCHLEVEL = 4
-SUBLEVEL = 72
+SUBLEVEL = 73
 EXTRAVERSION =
 NAME = Kleptomaniac Octopus
 

arch/arc/plat-hsdk/Kconfig

@@ -8,5 +8,6 @@ menuconfig ARC_SOC_HSDK
 	select ARC_HAS_ACCL_REGS
 	select ARC_IRQ_NO_AUTOSAVE
 	select CLK_HSDK
+	select RESET_CONTROLLER
 	select RESET_HSDK
 	select HAVE_PCI

arch/arm/boot/dts/imx6sl.dtsi

@@ -997,7 +997,7 @@
 			};
 
 			rngb: rngb@21b4000 {
-				compatible = "fsl,imx25-rngb";
+				compatible = "fsl,imx6sl-rngb", "fsl,imx25-rngb";
 				reg = <0x021b4000 0x4000>;
 				interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SL_CLK_DUMMY>;

arch/arm/boot/dts/meson8.dtsi

@@ -230,8 +230,6 @@
 				     <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,

arch/arm/boot/dts/owl-s500.dtsi

@@ -84,21 +84,21 @@
 		global_timer: timer@b0020200 {
 			compatible = "arm,cortex-a9-global-timer";
 			reg = <0xb0020200 0x100>;
-			interrupts = <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+			interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
 			status = "disabled";
 		};
 
 		twd_timer: timer@b0020600 {
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0xb0020600 0x20>;
-			interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
 			status = "disabled";
 		};
 
 		twd_wdt: wdt@b0020620 {
 			compatible = "arm,cortex-a9-twd-wdt";
 			reg = <0xb0020620 0xe0>;
-			interrupts = <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+			interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
 			status = "disabled";
 		};
 

arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts

@@ -223,16 +223,16 @@
 };
 
 &reg_dc1sw {
-	regulator-min-microvolt = <3000000>;
-	regulator-max-microvolt = <3000000>;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
 	regulator-name = "vcc-gmac-phy";
 };
 
 &reg_dcdc1 {
 	regulator-always-on;
-	regulator-min-microvolt = <3000000>;
-	regulator-max-microvolt = <3000000>;
-	regulator-name = "vcc-3v0";
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
 };
 
 &reg_dcdc2 {

arch/arm/mach-at91/pm.c

@@ -777,6 +777,7 @@ static void __init at91_pm_init(void (*pm_idle)(void))
 
 	pmc_np = of_find_matching_node_and_match(NULL, atmel_pmc_ids, &of_id);
 	soc_pm.data.pmc = of_iomap(pmc_np, 0);
+	of_node_put(pmc_np);
 	if (!soc_pm.data.pmc) {
 		pr_err("AT91: PM not supported, PMC not found\n");
 		return;

arch/arm/mach-omap2/cpuidle44xx.c

@@ -174,8 +174,10 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
 		 */
 		if (mpuss_can_lose_context) {
 			error = cpu_cluster_pm_enter();
-			if (error)
+			if (error) {
+				omap_set_pwrdm_state(mpu_pd, PWRDM_POWER_ON);
 				goto cpu_cluster_pm_out;
+			}
 		}
 	}
 

arch/arm/mach-s3c24xx/mach-at2440evb.c

@@ -143,7 +143,7 @@ static struct gpiod_lookup_table at2440evb_mci_gpio_table = {
 	.dev_id = "s3c2410-sdi",
 	.table = {
 		/* Card detect S3C2410_GPG(10) */
-		GPIO_LOOKUP("GPG", 10, "cd", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("GPIOG", 10, "cd", GPIO_ACTIVE_LOW),
 		{ },
 	},
 };

arch/arm/mach-s3c24xx/mach-h1940.c

@@ -468,9 +468,9 @@ static struct gpiod_lookup_table h1940_mmc_gpio_table = {
 	.dev_id = "s3c2410-sdi",
 	.table = {
 		/* Card detect S3C2410_GPF(5) */
-		GPIO_LOOKUP("GPF", 5, "cd", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("GPIOF", 5, "cd", GPIO_ACTIVE_LOW),
 		/* Write protect S3C2410_GPH(8) */
-		GPIO_LOOKUP("GPH", 8, "wp", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("GPIOH", 8, "wp", GPIO_ACTIVE_LOW),
 		{ },
 	},
 };

arch/arm/mach-s3c24xx/mach-mini2440.c

@@ -244,9 +244,9 @@ static struct gpiod_lookup_table mini2440_mmc_gpio_table = {
 	.dev_id = "s3c2410-sdi",
 	.table = {
 		/* Card detect S3C2410_GPG(8) */
-		GPIO_LOOKUP("GPG", 8, "cd", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("GPIOG", 8, "cd", GPIO_ACTIVE_LOW),
 		/* Write protect S3C2410_GPH(8) */
-		GPIO_LOOKUP("GPH", 8, "wp", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("GPIOH", 8, "wp", GPIO_ACTIVE_HIGH),
 		{ },
 	},
 };

arch/arm/mach-s3c24xx/mach-n30.c

@@ -359,9 +359,9 @@ static struct gpiod_lookup_table n30_mci_gpio_table = {
 	.dev_id = "s3c2410-sdi",
 	.table = {
 		/* Card detect S3C2410_GPF(1) */
-		GPIO_LOOKUP("GPF", 1, "cd", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("GPIOF", 1, "cd", GPIO_ACTIVE_LOW),
 		/* Write protect S3C2410_GPG(10) */
-		GPIO_LOOKUP("GPG", 10, "wp", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("GPIOG", 10, "wp", GPIO_ACTIVE_LOW),
 		{ },
 	},
 };

arch/arm/mach-s3c24xx/mach-rx1950.c

@@ -567,9 +567,9 @@ static struct gpiod_lookup_table rx1950_mmc_gpio_table = {
 	.dev_id = "s3c2410-sdi",
 	.table = {
 		/* Card detect S3C2410_GPF(5) */
-		GPIO_LOOKUP("GPF", 5, "cd", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("GPIOF", 5, "cd", GPIO_ACTIVE_LOW),
 		/* Write protect S3C2410_GPH(8) */
-		GPIO_LOOKUP("GPH", 8, "wp", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("GPIOH", 8, "wp", GPIO_ACTIVE_LOW),
 		{ },
 	},
 };

arch/arm/mm/cache-l2x0.c

@@ -1254,20 +1254,28 @@ static void __init l2c310_of_parse(const struct device_node *np,
 
 	ret = of_property_read_u32(np, "prefetch-data", &val);
 	if (ret == 0) {
-		if (val)
+		if (val) {
 			prefetch |= L310_PREFETCH_CTRL_DATA_PREFETCH;
-		else
+			*aux_val |= L310_PREFETCH_CTRL_DATA_PREFETCH;
+		} else {
 			prefetch &= ~L310_PREFETCH_CTRL_DATA_PREFETCH;
+			*aux_val &= ~L310_PREFETCH_CTRL_DATA_PREFETCH;
+		}
+		*aux_mask &= ~L310_PREFETCH_CTRL_DATA_PREFETCH;
 	} else if (ret != -EINVAL) {
 		pr_err("L2C-310 OF prefetch-data property value is missing\n");
 	}
 
 	ret = of_property_read_u32(np, "prefetch-instr", &val);
 	if (ret == 0) {
-		if (val)
+		if (val) {
 			prefetch |= L310_PREFETCH_CTRL_INSTR_PREFETCH;
-		else
+			*aux_val |= L310_PREFETCH_CTRL_INSTR_PREFETCH;
+		} else {
 			prefetch &= ~L310_PREFETCH_CTRL_INSTR_PREFETCH;
+			*aux_val &= ~L310_PREFETCH_CTRL_INSTR_PREFETCH;
+		}
+		*aux_mask &= ~L310_PREFETCH_CTRL_INSTR_PREFETCH;
 	} else if (ret != -EINVAL) {
 		pr_err("L2C-310 OF prefetch-instr property value is missing\n");
 	}

arch/arm64/boot/dts/actions/s700.dtsi

@@ -231,7 +231,7 @@
 
 		pinctrl: pinctrl@e01b0000 {
 			compatible = "actions,s700-pinctrl";
-			reg = <0x0 0xe01b0000 0x0 0x1000>;
+			reg = <0x0 0xe01b0000 0x0 0x100>;
 			clocks = <&cmu CLK_GPIO>;
 			gpio-controller;
 			gpio-ranges = <&pinctrl 0 0 136>;

arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi

@@ -155,8 +155,7 @@
 				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "gp",
 					  "gpmmu",
 					  "pp",
@@ -167,8 +166,7 @@
 					  "pp2",
 					  "ppmmu2",
 					  "pp3",
-					  "ppmmu3",
-					  "pmu";
+					  "ppmmu3";
 			clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>;
 			clock-names = "bus", "core";
 			resets = <&ccu RST_BUS_GPU>;

arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi

@@ -43,13 +43,13 @@
 
 		white {
 			label = "vim3:white:sys";
-			gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 
 		red {
 			label = "vim3:red";
-			gpios = <&gpio_expander 5 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio_expander 5 GPIO_ACTIVE_HIGH>;
 		};
 	};
 

arch/arm64/boot/dts/freescale/imx8mq.dtsi

@@ -651,6 +651,7 @@
 			gpc: gpc@303a0000 {
 				compatible = "fsl,imx8mq-gpc";
 				reg = <0x303a0000 0x10000>;
+				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-parent = <&gic>;
 				interrupt-controller;
 				broken-wake-request-signals;

arch/arm64/boot/dts/qcom/msm8916.dtsi

@@ -175,14 +175,14 @@
 	};
 
 	thermal-zones {
-		cpu0_1-thermal {
+		cpu0-1-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 4>;
 
 			trips {
-				cpu0_1_alert0: trip-point@0 {
+				cpu0_1_alert0: trip-point0 {
 					temperature = <75000>;
 					hysteresis = <2000>;
 					type = "passive";
@@ -205,7 +205,7 @@
 			};
 		};
 
-		cpu2_3-thermal {
+		cpu2-3-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
@@ -934,7 +934,7 @@
 				reg-names = "mdp_phys";
 
 				interrupt-parent = <&mdss>;
-				interrupts = <0 0>;
+				interrupts = <0>;
 
 				clocks = <&gcc GCC_MDSS_AHB_CLK>,
 					 <&gcc GCC_MDSS_AXI_CLK>,
@@ -966,7 +966,7 @@
 				reg-names = "dsi_ctrl";
 
 				interrupt-parent = <&mdss>;
-				interrupts = <4 0>;
+				interrupts = <4>;
 
 				assigned-clocks = <&gcc BYTE0_CLK_SRC>,
 						  <&gcc PCLK0_CLK_SRC>;

arch/arm64/boot/dts/qcom/pm8916.dtsi

@@ -113,7 +113,7 @@
 
 		wcd_codec: codec@f000 {
 			compatible = "qcom,pm8916-wcd-analog-codec";
-			reg = <0xf000 0x200>;
+			reg = <0xf000>;
 			reg-names = "pmic-codec-core";
 			clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>;
 			clock-names = "mclk";

arch/arm64/boot/dts/renesas/r8a774c0.dtsi

@@ -1212,9 +1212,8 @@
 			reg = <0 0xe6ea0000 0 0x0064>;
 			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 210>;
-			dmas = <&dmac1 0x43>, <&dmac1 0x42>,
-			       <&dmac2 0x43>, <&dmac2 0x42>;
-			dma-names = "tx", "rx", "tx", "rx";
+			dmas = <&dmac0 0x43>, <&dmac0 0x42>;
+			dma-names = "tx", "rx";
 			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
 			resets = <&cpg 210>;
 			#address-cells = <1>;

arch/arm64/boot/dts/renesas/r8a77990.dtsi

@@ -1168,9 +1168,8 @@
 			reg = <0 0xe6ea0000 0 0x0064>;
 			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 210>;
-			dmas = <&dmac1 0x43>, <&dmac1 0x42>,
-			       <&dmac2 0x43>, <&dmac2 0x42>;
-			dma-names = "tx", "rx", "tx", "rx";
+			dmas = <&dmac0 0x43>, <&dmac0 0x42>;
+			dma-names = "tx", "rx";
 			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
 			resets = <&cpg 210>;
 			#address-cells = <1>;

arch/arm64/boot/dts/xilinx/zynqmp.dtsi

@@ -419,7 +419,7 @@
 		};
 
 		i2c0: i2c@ff020000 {
-			compatible = "cdns,i2c-r1p14", "cdns,i2c-r1p10";
+			compatible = "cdns,i2c-r1p14";
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 17 4>;
@@ -429,7 +429,7 @@
 		};
 
 		i2c1: i2c@ff030000 {
-			compatible = "cdns,i2c-r1p14", "cdns,i2c-r1p10";
+			compatible = "cdns,i2c-r1p14";
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 18 4>;

arch/powerpc/include/asm/book3s/64/hash-4k.h

@@ -13,20 +13,19 @@
  */
 #define MAX_EA_BITS_PER_CONTEXT		46
 
-#define REGION_SHIFT		(MAX_EA_BITS_PER_CONTEXT - 2)
 
 /*
- * Our page table limit us to 64TB. Hence for the kernel mapping,
- * each MAP area is limited to 16 TB.
- * The four map areas are:  linear mapping, vmap, IO and vmemmap
+ * Our page table limit us to 64TB. For 64TB physical memory, we only need 64GB
+ * of vmemmap space. To better support sparse memory layout, we use 61TB
+ * linear map range, 1TB of vmalloc, 1TB of I/O and 1TB of vmememmap.
  */
+#define REGION_SHIFT		(40)
 #define H_KERN_MAP_SIZE		(ASM_CONST(1) << REGION_SHIFT)
 
 /*
- * Define the address range of the kernel non-linear virtual area
- * 16TB
+ * Define the address range of the kernel non-linear virtual area (61TB)
  */
-#define H_KERN_VIRT_START	ASM_CONST(0xc000100000000000)
+#define H_KERN_VIRT_START	ASM_CONST(0xc0003d0000000000)
 
 #ifndef __ASSEMBLY__
 #define H_PTE_TABLE_SIZE	(sizeof(pte_t) << H_PTE_INDEX_SIZE)