Skip to content

Commit

Permalink
📺 FYSETC_MINI_12864_2_1 with BTT_SKR_E3_DIP (MarlinFirmware#24986)
Browse files Browse the repository at this point in the history
  • Loading branch information
@ellensp @thinkyhead
ellensp authored and thinkyhead committed Dec 16, 2022
1 parent db60e0e commit 19b73a6
Showing 1 changed file with 97 additions and 26 deletions.
123 changes: 97 additions & 26 deletions Marlin/src/pins/stm32f1/pins_BTT_SKR_E3_DIP.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -166,32 +166,41 @@
* EXP1
*/

#define EXP1_01_PIN PA15
#define EXP1_02_PIN PB6
#define EXP1_03_PIN PA9
#define EXP1_04_PIN -1 // RESET
#define EXP1_05_PIN PA10
#define EXP1_06_PIN PB9
#define EXP1_07_PIN PB8
#define EXP1_08_PIN PB7

#if HAS_WIRED_LCD

#if ENABLED(CR10_STOCKDISPLAY)

#define BEEPER_PIN PA15
#define BEEPER_PIN EXP1_01_PIN

#define BTN_ENC PB6
#define BTN_EN1 PA9
#define BTN_EN2 PA10
#define BTN_ENC EXP1_02_PIN
#define BTN_EN1 EXP1_03_PIN
#define BTN_EN2 EXP1_05_PIN

#define LCD_PINS_RS PB8
#define LCD_PINS_ENABLE PB7
#define LCD_PINS_D4 PB9
#define LCD_PINS_RS EXP1_07_PIN
#define LCD_PINS_ENABLE EXP1_08_PIN
#define LCD_PINS_D4 EXP1_06_PIN

#elif ENABLED(ZONESTAR_LCD) // ANET A8 LCD Controller - Must convert to 3.3V - CONNECTING TO 5V WILL DAMAGE THE BOARD!

#ifndef NO_CONTROLLER_CUSTOM_WIRING_WARNING
#error "CAUTION! ZONESTAR_LCD requires wiring modifications. See 'pins_BTT_SKR_MINI_E3_DIP.h' for details. (Define NO_CONTROLLER_CUSTOM_WIRING_WARNING to suppress this warning.)"
#endif

#define LCD_PINS_RS PB9
#define LCD_PINS_ENABLE PB6
#define LCD_PINS_D4 PB8
#define LCD_PINS_D5 PA10
#define LCD_PINS_D6 PA9
#define LCD_PINS_D7 PA15
#define LCD_PINS_RS EXP1_06_PIN
#define LCD_PINS_ENABLE EXP1_02_PIN
#define LCD_PINS_D4 EXP1_07_PIN
#define LCD_PINS_D5 EXP1_05_PIN
#define LCD_PINS_D6 EXP1_03_PIN
#define LCD_PINS_D7 EXP1_01_PIN
#define ADC_KEYPAD_PIN PA1 // Repurpose servo pin for ADC - CONNECTING TO 5V WILL DAMAGE THE BOARD!

#elif EITHER(MKS_MINI_12864, ENDER2_STOCKDISPLAY)
Expand All @@ -207,19 +216,81 @@
* EXP1
*/

#define BTN_ENC PB6
#define BTN_EN1 PA9
#define BTN_EN2 PA10
#define BTN_ENC EXP1_02_PIN
#define BTN_EN1 EXP1_03_PIN
#define BTN_EN2 EXP1_05_PIN

#define DOGLCD_CS PB8
#define DOGLCD_A0 PB9
#define DOGLCD_SCK PA15
#define DOGLCD_MOSI PB7
#define DOGLCD_CS EXP1_07_PIN
#define DOGLCD_A0 EXP1_06_PIN
#define DOGLCD_SCK EXP1_01_PIN
#define DOGLCD_MOSI EXP1_08_PIN
#define FORCE_SOFT_SPI
#define LCD_BACKLIGHT_PIN -1

#elif ENABLED(FYSETC_MINI_12864_2_1)

#ifndef NO_CONTROLLER_CUSTOM_WIRING_WARNING
#error "CAUTION! FYSETC_MINI_12864_2_1 and it's clones require wiring modifications. See 'pins_BTT_SKR_MINI_E3_DIP.h' for details. (Define NO_CONTROLLER_CUSTOM_WIRING_WARNING to suppress this warning.)"
#endif
#if SD_CONNECTION_IS(LCD)
#error "The LCD SD Card is not supported with this configuration."
#endif

/**
* FYSETC_MINI_12864_2_1 / MKS_MINI_12864_V3 / BTT_MINI_12864_V1 display pinout
*
* Board Display
* ------ ------
* (NEOPIXEL) PA15 | 1 2 | PB6 (BTN_ENC) 5V |10 9 | GND
* (BTN_EN2) PA9 | 3 4 | RESET -- | 8 7 | --
* (BTN_EN1) PA10 5 6 | PB9 (LCD_RESET) NEOPIXEL | 6 5 LCD RESET
* (LCD_A0) PB8 | 7 8 | PB7 (LCD_CS) LCD_A0 | 4 3 | LCD_CS
* GND | 9 10 | 5V BTN_ENC | 2 1 | BEEP
* ------ ------
* EXP1 EXP1
*
*
* ----- ------
* | 1 | RST -- |10 9 | --
* | 2 | PA3 RX2 RESET_BTN | 8 7 | SD_DETECT
* | 3 | PA2 TX2 LCD_MOSI | 6 5 EN2
* | 4 | GND -- | 4 3 | EN1
* | 5 | 5V LCD_SCK | 2 1 | --
* ----- ------
* TFT EXP2
*
* Needs custom cable.
*
* BOARD EXP1 NEOPIXEL <--> LCD EXP1 NEOPIXEL
* BOARD EXP1 BTN_ENC <--> LCD EXP1 BTN_ENC
* BOARD EXP1 BTN_EN2 <--> LCD EXP2 EN2
* BOARD EXP1 RESET <--> LCD EXP2 RESET_BTN
* BOARD EXP1 BTN_EN1 <--> LCD EXP2 EN1
* BOARD EXP1 LCD_RESET <--> LCD EXP1 LCD RESET
* BOARD EXP1 LCD_A0 <--> LCD EXP1 LCD_A0
* BOARD EXP1 LCD_CS <--> LCD EXP1 LCD_CS
* BOARD TFT RX2 <--> LCD EXP2 LCD_MOSI
* BOARD TFT TX2 <--> LCD EXP2 LCD_SCK
*/

#define NEOPIXEL_PIN EXP1_01_PIN
#define BTN_ENC EXP1_02_PIN
#define BTN_EN1 EXP1_03_PIN
#define BTN_EN2 EXP1_05_PIN
#define LCD_RESET_PIN EXP1_06_PIN
#define BEEPER_PIN -1
#define DOGLCD_A0 EXP1_07_PIN
#define DOGLCD_CS EXP1_08_PIN

#define DOGLCD_SCK PA2
#define DOGLCD_MOSI PA3

#define LCD_BACKLIGHT_PIN -1
#define FORCE_SOFT_SPI

#else
#error "Only CR10_STOCKDISPLAY, ZONESTAR_LCD, ENDER2_STOCKDISPLAY, MKS_MINI_12864, and MKS_LCD12864A/B are currently supported on the BIGTREE_SKR_E3_DIP."
#error "Only CR10_STOCKDISPLAY, ZONESTAR_LCD, ENDER2_STOCKDISPLAY, MKS_MINI_12864, FYSETC_MINI_12864_2_1 and MKS_LCD12864A/B are currently supported on the BIGTREE_SKR_E3_DIP."
#endif

#endif // HAS_WIRED_LCD
Expand Down Expand Up @@ -260,10 +331,10 @@

#define CLCD_SPI_BUS 1 // SPI1 connector

#define BEEPER_PIN PB6
#define BEEPER_PIN EXP1_02_PIN

#define CLCD_MOD_RESET PA9
#define CLCD_SPI_CS PB8
#define CLCD_MOD_RESET EXP1_03_PIN
#define CLCD_SPI_CS EXP1_07_PIN

#endif // TOUCH_UI_FTDI_EVE && LCD_FYSETC_TFT81050

Expand All @@ -281,8 +352,8 @@
#define SD_MISO_PIN PA6
#define SD_MOSI_PIN PA7
#elif SD_CONNECTION_IS(LCD) && BOTH(TOUCH_UI_FTDI_EVE, LCD_FYSETC_TFT81050)
#define SD_DETECT_PIN PA15
#define SD_SS_PIN PA10
#define SD_DETECT_PIN EXP1_01_PIN
#define SD_SS_PIN EXP1_05_PIN
#elif SD_CONNECTION_IS(CUSTOM_CABLE)
#error "SD CUSTOM_CABLE is not compatible with SKR E3 DIP."
#endif
Expand Down

0 comments on commit 19b73a6

Please sign in to comment.