✨ JyersUI TMC Settings (MarlinFirmware#25048)

Marlin/src/lcd/e3v2/jyersui/dwin.cpp

@@ -80,6 +80,13 @@
  #include "../../../feature/powerloss.h"
 #endif
 
+#if HAS_TRINAMIC_CONFIG
+ #include "../../../module/stepper/trinamic.h"
+
+ #define TMC_MIN_CURRENT 400
+ #define TMC_MAX_CURRENT 1500
+#endif
+
 #define MACHINE_SIZE STRINGIFY(X_BED_SIZE) "x" STRINGIFY(Y_BED_SIZE) "x" STRINGIFY(Z_MAX_POS)
 
 #define DWIN_FONT_MENU font8x16
@@ -2295,7 +2302,7 @@ void CrealityDWINClass::Menu_Item_Handler(uint8_t menu, uint8_t item, bool draw/
  Draw_Float(planner.flow_percentage[0], row, false, 1);
  }
  else
- Modify_Value(planner.flow_percentage[0], MIN_FLOW_RATE, MAX_FLOW_RATE, 1);
+ Modify_Value(planner.flow_percentage[0], MIN_FLOW_RATE, MAX_FLOW_RATE, 1, []{ planner.refresh_e_factor(0); });
  break;
  #endif
  }
@@ -2720,7 +2727,8 @@ void CrealityDWINClass::Menu_Item_Handler(uint8_t menu, uint8_t item, bool draw/
  #define ADVANCED_BACK 0
  #define ADVANCED_BEEPER (ADVANCED_BACK + ENABLED(SOUND_MENU_ITEM))
  #define ADVANCED_PROBE (ADVANCED_BEEPER + ENABLED(HAS_BED_PROBE))
- #define ADVANCED_CORNER (ADVANCED_PROBE + 1)
+ #define ADVANCED_TMC (ADVANCED_PROBE + ENABLED(HAS_TRINAMIC_CONFIG))
+ #define ADVANCED_CORNER (ADVANCED_TMC + 1)
  #define ADVANCED_LA (ADVANCED_CORNER + ENABLED(LIN_ADVANCE))
  #define ADVANCED_LOAD (ADVANCED_LA + ENABLED(ADVANCED_PAUSE_FEATURE))
  #define ADVANCED_UNLOAD (ADVANCED_LOAD + ENABLED(ADVANCED_PAUSE_FEATURE))
@@ -2760,6 +2768,15 @@ void CrealityDWINClass::Menu_Item_Handler(uint8_t menu, uint8_t item, bool draw/
  break;
  #endif
 
+ #if HAS_TRINAMIC_CONFIG
+ case ADVANCED_TMC:
+ if (draw)
+ Draw_Menu_Item(row, ICON_Motion, F("TMC Drivers"), nullptr, true);
+ else
+ Draw_Menu(TMCMenu);
+ break;
+ #endif
+
  case ADVANCED_CORNER:
  if (draw) {
  Draw_Menu_Item(row, ICON_MaxAccelerated, F("Bed Screw Inset"));
@@ -2905,7 +2922,93 @@ void CrealityDWINClass::Menu_Item_Handler(uint8_t menu, uint8_t item, bool draw/
  break;
  }
  break;
- #endif
+ #endif // HAS_PROBE_MENU
+
+ #if HAS_TRINAMIC_CONFIG
+ case TMCMenu:
+
+ #define TMC_BACK 0
+ #define TMC_STEPPER_CURRENT_X (TMC_BACK + AXIS_IS_TMC(X))
+ #define TMC_STEPPER_CURRENT_Y (TMC_STEPPER_CURRENT_X + AXIS_IS_TMC(Y))
+ #define TMC_STEPPER_CURRENT_Z (TMC_STEPPER_CURRENT_Y + AXIS_IS_TMC(Z))
+ #define TMC_STEPPER_CURRENT_E (TMC_STEPPER_CURRENT_Z + AXIS_IS_TMC(E0))
+ #define TMC_TOTAL TMC_STEPPER_CURRENT_E
+
+ switch (item) {
+
+ case TMC_BACK:
+ if (draw)
+ Draw_Menu_Item(row, ICON_Back, F("Back"));
+ else
+ Draw_Menu(Advanced, ADVANCED_TMC);
+ break;
+
+ #if AXIS_IS_TMC(X)
+ case TMC_STEPPER_CURRENT_X:
+
+ static float stepper_current_x;
+
+ if (draw) {
+ Draw_Menu_Item(row, ICON_StepX, F("Stepper X current"));
+ stepper_current_x = stepperX.getMilliamps();
+ Draw_Float(stepper_current_x, row, false, 1);
+ }
+ else {
+ Modify_Value(stepper_current_x, TMC_MIN_CURRENT, TMC_MAX_CURRENT, 1, []{ stepperX.rms_current(stepper_current_x); });
+ }
+ break;
+ #endif
+
+ #if AXIS_IS_TMC(Y)
+ case TMC_STEPPER_CURRENT_Y:
+
+ static float stepper_current_y;
+
+ if (draw) {
+ Draw_Menu_Item(row, ICON_StepY, F("Stepper Y current"));
+ stepper_current_y = stepperY.getMilliamps();
+ Draw_Float(stepper_current_y, row, false, 1);
+ }
+ else {
+ Modify_Value(stepper_current_y, TMC_MIN_CURRENT, TMC_MAX_CURRENT, 1, []{ stepperY.rms_current(stepper_current_y); });
+ }
+ break;
+ #endif
+
+ #if AXIS_IS_TMC(Z)
+ case TMC_STEPPER_CURRENT_Z:
+
+ static float stepper_current_z;
+
+ if (draw) {
+ Draw_Menu_Item(row, ICON_StepZ, F("Stepper Z current"));
+ stepper_current_z = stepperZ.getMilliamps();
+ Draw_Float(stepper_current_z, row, false, 1);
+ }
+ else {
+ Modify_Value(stepper_current_z, TMC_MIN_CURRENT, TMC_MAX_CURRENT, 1, []{ stepperZ.rms_current(stepper_current_z); });
+ }
+ break;
+ #endif
+
+ #if AXIS_IS_TMC(E0)
+ case TMC_STEPPER_CURRENT_E:
+
+ static float stepper_current_e;
+
+ if (draw) {
+ Draw_Menu_Item(row, ICON_StepE, F("Stepper E current"));
+ stepper_current_e = stepperE0.getMilliamps();
+ Draw_Float(stepper_current_e, row, false, 1);
+ }
+ else {
+ Modify_Value(stepper_current_e, TMC_MIN_CURRENT, TMC_MAX_CURRENT, 1, []{ stepperE0.rms_current(stepper_current_e); });
+ }
+ break;
+ #endif
+ };
+ break;
+ #endif // HAS_TRINAMIC_CONFIG
 
  case InfoMain:
  case Info:
@@ -3637,7 +3740,7 @@ void CrealityDWINClass::Menu_Item_Handler(uint8_t menu, uint8_t item, bool draw/
  Draw_Float(planner.flow_percentage[0], row, false, 1);
  }
  else
- Modify_Value(planner.flow_percentage[0], MIN_FLOW_RATE, MAX_FLOW_RATE, 1);
+ Modify_Value(planner.flow_percentage[0], MIN_FLOW_RATE, MAX_FLOW_RATE, 1, []{ planner.refresh_e_factor(0); });
  break;
  case TUNE_HOTEND:
  if (draw) {
@@ -3879,7 +3982,10 @@ FSTR_P CrealityDWINClass::Get_Menu_Title(uint8_t menu) {
  case Visual: return F("Visual Settings");
  case Advanced: return F("Advanced Settings");
  #if HAS_BED_PROBE
- case ProbeMenu: return F("Probe Menu");
+ case ProbeMenu: return F("Bed Probe");
+ #endif
+ #if HAS_TRINAMIC_CONFIG
+ case TMCMenu: return F("TMC Drivers");
  #endif
  case ColorSettings: return F("UI Color Settings");
  case Info: return F("Info");
@@ -3949,6 +4055,9 @@ uint8_t CrealityDWINClass::Get_Menu_Size(uint8_t menu) {
  #if HAS_BED_PROBE
  case ProbeMenu: return PROBE_TOTAL;
  #endif
+ #if HAS_TRINAMIC_CONFIG
+ case TMCMenu: return TMC_TOTAL;
+ #endif
  case Info: return INFO_TOTAL;
  case InfoMain: return INFO_TOTAL;
  #if ENABLED(AUTO_BED_LEVELING_UBL) && !HAS_BED_PROBE
@@ -4117,8 +4226,6 @@ void CrealityDWINClass::Value_Control() {
  case LevelManual: mesh_conf.manual_mesh_move(selection == LEVELING_M_OFFSET); break;
  #endif
  }
- if (valuepointer == &planner.flow_percentage[0])
- planner.refresh_e_factor(0);
  if (funcpointer) funcpointer();
  return;
  }

Marlin/src/lcd/e3v2/jyersui/dwin.h

@@ -75,6 +75,9 @@ enum menuID : uint8_t {
  ColorSettings,
  Advanced,
  ProbeMenu,
+ #if HAS_TRINAMIC_CONFIG
+ TMCMenu,
+ #endif
  Info,
  Leveling,
  LevelManual,