net: dsa: mv88e6xxx: enable support for 88E6361 switch

Marvell 88E6361 is an 8-port switch derived from the 88E6393X/88E9193X/88E6191X switches family. It can benefit from the existing mv88e6xxx driver by simply adding the proper switch description in the driver. Main differences with other switches from this family are: - 8 ports exposed (instead of 11): ports 1, 2 and 8 not available - No 5GBase-x nor SFI/USXGMII support Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ampere-openbmc · May 31, 2023 · 12899f2 · 12899f2
1 parent 18e1b74
commit 12899f2
Show file tree

Hide file tree

Showing 4 changed files with 51 additions and 9 deletions.
diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -790,6 +790,8 @@ static void mv88e6393x_phylink_get_caps(struct mv88e6xxx_chip *chip, int port,
 	unsigned long *supported = config->supported_interfaces;
 	bool is_6191x =
 		chip->info->prod_num == MV88E6XXX_PORT_SWITCH_ID_PROD_6191X;
+	bool is_6361 =
+		chip->info->prod_num == MV88E6XXX_PORT_SWITCH_ID_PROD_6361;
 
 	mv88e6xxx_translate_cmode(chip->ports[port].cmode, supported);
 
@@ -804,13 +806,17 @@ static void mv88e6393x_phylink_get_caps(struct mv88e6xxx_chip *chip, int port,
 		/* 6191X supports >1G modes only on port 10 */
 		if (!is_6191x || port == 10) {
 			__set_bit(PHY_INTERFACE_MODE_2500BASEX, supported);
-			__set_bit(PHY_INTERFACE_MODE_5GBASER, supported);
-			__set_bit(PHY_INTERFACE_MODE_10GBASER, supported);
+			config->mac_capabilities |= MAC_2500FD;
+
+			/* 6361 only supports up to 2500BaseX */
+			if (!is_6361) {
+				__set_bit(PHY_INTERFACE_MODE_5GBASER, supported);
+				__set_bit(PHY_INTERFACE_MODE_10GBASER, supported);
+				config->mac_capabilities |= MAC_5000FD |
+					MAC_10000FD;
+			}
 			/* FIXME: USXGMII is not supported yet */
 			/* __set_bit(PHY_INTERFACE_MODE_USXGMII, supported); */
-
-			config->mac_capabilities |= MAC_2500FD | MAC_5000FD |
-				MAC_10000FD;
 		}
 	}
 
@@ -6334,6 +6340,32 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = {
 		.ptp_support = true,
 		.ops = &mv88e6352_ops,
 	},
+	[MV88E6361] = {
+		.prod_num = MV88E6XXX_PORT_SWITCH_ID_PROD_6361,
+		.family = MV88E6XXX_FAMILY_6393,
+		.name = "Marvell 88E6361",
+		.num_databases = 4096,
+		.num_macs = 16384,
+		.num_ports = 11,
+		/* Ports 1, 2 and 8 are not routed */
+		.invalid_port_mask = BIT(1) | BIT(2) | BIT(8),
+		.num_internal_phys = 5,
+		.internal_phys_offset = 3,
+		.max_vid = 4095,
+		.max_sid = 63,
+		.port_base_addr = 0x0,
+		.phy_base_addr = 0x0,
+		.global1_addr = 0x1b,
+		.global2_addr = 0x1c,
+		.age_time_coeff = 3750,
+		.g1_irqs = 10,
+		.g2_irqs = 14,
+		.atu_move_port_mask = 0x1f,
+		.pvt = true,
+		.multi_chip = true,
+		.ptp_support = true,
+		.ops = &mv88e6393x_ops,
+	},
 	[MV88E6390] = {
 		.prod_num = MV88E6XXX_PORT_SWITCH_ID_PROD_6390,
 		.family = MV88E6XXX_FAMILY_6390,

diff --git a/drivers/net/dsa/mv88e6xxx/chip.h b/drivers/net/dsa/mv88e6xxx/chip.h
@@ -82,6 +82,7 @@ enum mv88e6xxx_model {
 	MV88E6350,
 	MV88E6351,
 	MV88E6352,
+	MV88E6361,
 	MV88E6390,
 	MV88E6390X,
 	MV88E6393X,
@@ -100,7 +101,7 @@ enum mv88e6xxx_family {
 	MV88E6XXX_FAMILY_6351,	/* 6171 6175 6350 6351 */
 	MV88E6XXX_FAMILY_6352,	/* 6172 6176 6240 6352 */
 	MV88E6XXX_FAMILY_6390,  /* 6190 6190X 6191 6290 6390 6390X */
-	MV88E6XXX_FAMILY_6393,	/* 6191X 6193X 6393X */
+	MV88E6XXX_FAMILY_6393,	/* 6191X 6193X 6361 6393X */
 };
 
 /**

diff --git a/drivers/net/dsa/mv88e6xxx/port.c b/drivers/net/dsa/mv88e6xxx/port.c
@@ -424,6 +424,10 @@ int mv88e6393x_port_set_speed_duplex(struct mv88e6xxx_chip *chip, int port,
 	u16 reg, ctrl;
 	int err;
 
+	if (chip->info->prod_num == MV88E6XXX_PORT_SWITCH_ID_PROD_6361 &&
+	    speed > 2500)
+		return -EOPNOTSUPP;
+
 	if (speed == 200 && port != 0)
 		return -EOPNOTSUPP;
 
@@ -506,10 +510,14 @@ int mv88e6393x_port_set_speed_duplex(struct mv88e6xxx_chip *chip, int port,
 phy_interface_t mv88e6393x_port_max_speed_mode(struct mv88e6xxx_chip *chip,
 					       int port)
 {
-	if (port == 0 || port == 9 || port == 10)
-		return PHY_INTERFACE_MODE_10GBASER;
 
-	return PHY_INTERFACE_MODE_NA;
+	if (port != 0 && port != 9 && port != 10)
+		return PHY_INTERFACE_MODE_NA;
+
+	if (chip->info->prod_num == MV88E6XXX_PORT_SWITCH_ID_PROD_6361)
+		return PHY_INTERFACE_MODE_2500BASEX;
+
+	return PHY_INTERFACE_MODE_10GBASER;
 }
 
 static int mv88e6xxx_port_set_cmode(struct mv88e6xxx_chip *chip, int port,

diff --git a/drivers/net/dsa/mv88e6xxx/port.h b/drivers/net/dsa/mv88e6xxx/port.h
@@ -133,6 +133,7 @@
 #define MV88E6XXX_PORT_SWITCH_ID_PROD_6220	0x2200
 #define MV88E6XXX_PORT_SWITCH_ID_PROD_6240	0x2400
 #define MV88E6XXX_PORT_SWITCH_ID_PROD_6250	0x2500
+#define MV88E6XXX_PORT_SWITCH_ID_PROD_6361	0x2610
 #define MV88E6XXX_PORT_SWITCH_ID_PROD_6290	0x2900
 #define MV88E6XXX_PORT_SWITCH_ID_PROD_6321	0x3100
 #define MV88E6XXX_PORT_SWITCH_ID_PROD_6141	0x3400