Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

Unable to boot compiled linux on Aakash #3

Open
gopalpradhan opened this issue Jan 17, 2013 · 10 comments
Open

Unable to boot compiled linux on Aakash #3

gopalpradhan opened this issue Jan 17, 2013 · 10 comments

Comments

@gopalpradhan
Copy link

Hi,

I followed the steps mentioned in "linux-on-aakash" document, to checkout, compile and create a bootable SD card.

The u-boot is successfully loading the kernel image, but ends up in kernel oops. The output is as follows:

27432 bytes read
reading uImage

3545704 bytes read

Booting kernel from Legacy Image at 48000000 ...

Image Name: Linux-3.0.42
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 3545640 Bytes = 3.4 MiB
Load Address: 40008000
Entry Point: 40008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK

Starting kernel ...

<6>Initializing cgroup subsys cpuset
<5>Linux version 3.0.42 (root@pawandoot) (gcc version 4.7.2 (Sourcery CodeBench Lite 2012.09-64) ) #3 PREEMPT3
CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: sun5i
<6>Memory cut off:
<6> MALI : 0x5c000000 - 0x5fffffff ( 64 MB)
<4>Ignoring unrecognised tag 0x00000000
<6>Memory Reserved:
<6> SYS : 0x43000000 - 0x4300ffff ( 64 kB)
<6> LCD : 0x5a000000 - 0x5bffffff ( 32 MB)
<6> VE : 0x44000000 - 0x48ffffff ( 80 MB)
Memory policy: ECC disabled, Data cache writeback
<6>BROM Ver: 1100 1100 1625
<6>chip-id: A13 (AW1625)
<7>On node 0 totalpages: 114688
<7>free_area_init_node: node 0, pgdat c06ccabc, node_mem_map c0885000
<7> Normal zone: 896 pages used for memmap
<7> Normal zone: 0 pages reserved
<7> Normal zone: 113792 pages, LIFO batch:31
<7>pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
<7>pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 113792
<5>Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait loglevel=8 panic=10
<6>PID hash table entries: 2048 (order: 1, 8192 bytes)
<6>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>Memory: 448MB = 448MB total
<5>Memory: 331248k/331248k available, 127504k reserved, 0K highmem
<5>Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
vmalloc : 0xdc800000 - 0xf0000000 ( 312 MB)
lowmem : 0xc0000000 - 0xdc000000 ( 448 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.init : 0xc0008000 - 0xc0030000 ( 160 kB)
.text : 0xc0030000 - 0xc067f6d8 (6462 kB)
.data : 0xc0680000 - 0xc06d2e50 ( 332 kB)
.bss : 0xc06d2e74 - 0xc0884a78 (1736 kB)
<6>SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
<6>NR_IRQS:96 nr_irqs:96 96
<6>timer0: Periodic Mode
<6>Console: colour dummy device 80x30
<3>ram_console: buffer (null), invalid size 0, datasize 4294967284
<6>Calibrating delay loop... 1001.88 BogoMIPS (lpj=5009408)
<6>pid_max: default: 32768 minimum: 301
<6>Mount-cache hash table entries: 512
<6>Initializing cgroup subsys cpuacct
<6>Initializing cgroup subsys devices
<6>Initializing cgroup subsys freezer
<6>Initializing cgroup subsys blkio
<6>CPU: Testing write buffer coherency: ok
<6>hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
<6>devtmpfs: initialized
<6>print_constraints: dummy:
<6>NET: Registered protocol family 16
<6>hw-breakpoint: debug architecture 0x4 unsupported.
SOFTWINNER DMA Driver, (c) 2003-2004,2006 Simtec Electronics
<6>Initialize DMAC OK
<6>bio: create slab at 0
<5>SCSI subsystem initialized
<6>usbcore: registered new interface driver usbfs
<6>usbcore: registered new interface driver hub
<6>usbcore: registered new device driver usb
<6>Advanced Linux Sound Architecture Driver Version 1.0.24.
<6>cfg80211: Calling CRDA to update world regulatory domain
Init eGon pin module V2.0
<6>Switching to clocksource aw 64bits couter
<5>FS-Cache: Loaded
<6>CacheFiles: Loaded
<1>Unable to handle kernel paging request at virtual address 33363a34
<1>pgd = c0004000
<1>[33363a34] *pgd=00000000
<0>Internal error: Oops: 5 [#1] PREEMPT
Modules linked in:
CPU: 0 Not tainted (3.0.42 #3)
PC is at kmem_cache_alloc+0x74/0xc0
LR is at con_insert_unipair+0xb8/0x104
pc : [] lr : [] psr: 60000093
sp : d983bef8 ip : 00000001 fp : 00000000
r10: c06ac9bc r9 : 00000003 r8 : 0000005f
r7 : 000000d0 r6 : 0000025c r5 : d9802200 r4 : 33363a34
r3 : 20000013 r2 : c02adb14 r1 : 00000000 r0 : c0c08040
Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel
Control: 10c5387d Table: 40004019 DAC: 00000015

PC: 0xc00de34c:
e34c e1a00008 eb05eeaa eaffffb5 e92d40f8 e1a0200e e1a05000 e1a07001 e5953000
e36c e5936004 e5934000 e3540000 0a000018 e10f3000 f10c0080 e5950000 e590c000
e38c e154000c 0a000007 e3a0c000 e121f003 e35c0000 0afffff0 e3170902 1a000014
e3ac e1a00004 e8bd80f8 e5901004 e1560001 1afffff4 e5951014 e2866001 e3a0c001
e3cc e7941001 e5801000 e5951000 e5816004 eaffffed e1a00005 e1a01007 eb0f97c8
e3ec e3170902 e1a04000 0affffec e3500000 0affffea e5951010 e3510000 0affffe7
e40c e1a00004 eb05ee7a eaffffe4 e92d4070 e30b41d8 e34c4076 e1a06000 e1a05001
e42c e5943050 e3530003 0a00000f e5940030 e3500000 0a00000a e3a010d0 ebffffc2

LR: 0xc02ada94:
da94 e0844a06 e3a00000 e1a02082 e18360b2 e5953084 e0834004 e5854084 e8bd80f8
dab4 e30b31f0 e34c3076 e593001c e3500000 0a00001c e3a010d0 ebf8c221 e3500000
dad4 e7850107 0a00001e e3a03000 e1a01003 e7801003 e2833004 e3530080 1afffffb
daf4 eaffffe0 e30b31f0 e34c3076 e593001c e3500000 0a00000f e3a010d0 ebf8c210
db14 e3500000 e1a03000 e5870000 0a00000c e1a00003 e3a010ff e3a02080 ebfeb082
db34 e1a03000 eaffffd4 e3a0c010 e785c107 e1a0000c eaffffe3 e3a03010 e5873000
db54 eafffff2 e3e0000b e8bd80f8 e92d4ff0 e24dd00c e3a08000 e3053108 e58d0004
db74 e34c3077 e1a0a001 e58d3000 e1a06008 ea000003 e2866001 e2888014 e356003f

SP: 0xd983be78:
be78 00000007 d98ae180 00000000 c02d3ac4 00000000 00000000 d9802200 00000020
be98 0000040f 00000005 0000025c 000000d0 0000005f c0036250 c0c08040 00000000
beb8 c02adb14 20000013 33363a34 d9802200 0000025c 000000d0 0000005f 00000003
bed8 c06ac9bc 00000000 00000001 d983bef8 c02adb14 c00de3cc 60000093 ffffffff
bef8 c076b1f0 000023bd d98ae240 0000005f d98af1b8 c02adb14 c06acb20 00000002
bf18 c06ac9c0 d98ae240 0000005f c02ae3dc 60000013 c06acb20 c0774ee4 d9803200
bf38 c001d1c8 00000001 00000000 c0775108 00000000 c06d2e80 c001d1c8 00000000
bf58 00000000 c001c208 00000000 00000001 00000002 c001c744 c05fcb68 c013bc98

R0: 0xc0c07fc0:
7fc0 0000ffff 0000ffff 0000ffff 0000ffff 0000ffff 0000ffff 0000ffff 0000ffff
7fe0 0000ffff 0000ffff 0000ffff 0000ffff 0000ffff 0000ffff 0000ffff 0000ffff
8000 d98015c0 0000002d c0bb5020 00000000 d9802580 0000000b c0bb5040 00000000
8020 d98ae300 000002c6 c0bb65c0 00000000 d98b0100 00000936 c0bb6600 00000000
8040 33363a34 0000025b c0bb6620 00000000 d9830900 0000000d c0bb5600 00000000
8060 d986be00 0000024f c0bb5d60 00000000 d989a400 0000000c c0bb6340 00000000
8080 d9859800 00000003 c0bb5b00 00000000 d9812000 0000023c c0bb5200 00000000
80a0 d980a000 00000001 c0bb5100 00000000 d9823130 0000028f c0bb5460 00000000

R2: 0xc02ada94:
da94 e0844a06 e3a00000 e1a02082 e18360b2 e5953084 e0834004 e5854084 e8bd80f8
dab4 e30b31f0 e34c3076 e593001c e3500000 0a00001c e3a010d0 ebf8c221 e3500000
dad4 e7850107 0a00001e e3a03000 e1a01003 e7801003 e2833004 e3530080 1afffffb
daf4 eaffffe0 e30b31f0 e34c3076 e593001c e3500000 0a00000f e3a010d0 ebf8c210
db14 e3500000 e1a03000 e5870000 0a00000c e1a00003 e3a010ff e3a02080 ebfeb082
db34 e1a03000 eaffffd4 e3a0c010 e785c107 e1a0000c eaffffe3 e3a03010 e5873000
db54 eafffff2 e3e0000b e8bd80f8 e92d4ff0 e24dd00c e3a08000 e3053108 e58d0004
db74 e34c3077 e1a0a001 e58d3000 e1a06008 ea000003 e2866001 e2888014 e356003f

R5: 0xd9802180:
2180 c0c08030 00000000 00000006 00000040 00000040 00000000 00000040 00000040
21a0 00000040 00000000 00000004 00000000 00000040 00000040 00000000 d9800040
21c0 d9802140 d9802240 00000000 00000000 00000000 00000000 00000000 00000000
21e0 00000000 00000000 00000000 d9801060 ffff0000 ffff0000 ffff0000 ffff0000
2200 c0c08040 00000000 00000007 00000080 00000080 00000000 00000020 00000020
2220 00000020 00000000 00000008 00000000 00000080 00000040 00000000 d9800080
2240 d98021c0 d98022c0 00000000 00000000 00000000 00000000 00000000 00000000
2260 00000000 00000000 00000000 d9801080 ffff0000 ffff0000 ffff0000 ffff0000

R10: 0xc06ac93c:
c93c 00370036 00390038 003b003a 003d003c 003f003e 00410040 00c100c0 00c300c2
c95c 00430042 004400a9 004500d0 00ca00c8 004600cb 00480047 00cc0049 00ce00cd
c97c 004a00cf 212a004b 004d004c 004f004e 00d300d2 00d500d4 00510050 00ae0052
c99c 00540053 00d90055 00db00da 00570056 00590058 005a00dd 005c005b 005e005d
c9bc 23bd005f 0060f804 00e30061 00630062 00650064 00670066 00690068 006b006a
c9dc 006d006c 006f006e 007000f5 00720071 00740073 00760075 00780077 007900d7
c9fc 007a00fd 007c007b 007d00a6 2302007e 00fc00c7 00e200e9 00e000e4 00e700e5
ca1c 00eb00ea 00ef00e8 00ec00ee 00c500c4 00c9212b 00c600e6 00f600f4 00fb00f2
<0>Process swapper (pid: 1, stack limit = 0xd983a2e8)
<0>Stack: (0xd983bef8 to 0xd983c000)
<0>bee0: c076b1f0 000023bd
<0>bf00: d98ae240 0000005f d98af1b8 c02adb14 c06acb20 00000002 c06ac9c0 d98ae240
<0>bf20: 0000005f c02ae3dc 60000013 c06acb20 c0774ee4 d9803200 c001d1c8 00000001
<0>bf40: 00000000 c0775108 00000000 c06d2e80 c001d1c8 00000000 00000000 c001c208
<0>bf60: 00000000 00000001 00000002 c001c744 c05fcb68 c013bc98 d986ee70 c0774b28
<0>bf80: 00000000 d983a000 00000013 c001bce4 c05bad44 00000013 c00282c0 c00282c0
<0>bfa0: c0028860 c003046c 0000005e c00377e0 00000013 34390000 00000000 00000000
<0>bfc0: c00282c0 c0028860 c00377e0 00000000 00000000 00000000 00000000 c0008aa4
<0>bfe0: 00000000 00000000 00000000 00000000 c00089a4 c00377e0 ffff0000 ffff0000
from
from
from
from
from
from
from
from
<0>Code: 1afffff4 e5951014 e2866001 e3a0c001 (e7941001)
<4>---[ end trace 148363d23aac6885 ]---
<0>Kernel panic - not syncing: Attempted to kill init!
from
from
from
from
from
from
from
Exception stack(0xd983beb0 to 0xd983bef8)
bea0: c0c08040 00000000 c02adb14 20000013
bec0: 33363a34 d9802200 0000025c 000000d0 0000005f 00000003 c06ac9bc 00000000
bee0: 00000001 d983bef8 c02adb14 c00de3cc 60000093 ffffffff
from
from
from
from
from
from
from
from
from

<0>Rebooting in 10 seconds..

Any help will be greatly appreciated.

Regards,
Gopal
@srikantpatnaik
Copy link
Member

I would suggest you to use the latest source from
https://github.com/linux-sunxi/linux-sunxi
You can use the same config file which is mentioned in the documentation.

On Thu, Jan 17, 2013 at 9:32 PM, gopalpradhan notifications@github.comwrote:

Hi,

I followed the steps mentioned in "linux-on-aakash" document, to checkout,
compile and create a bootable SD card.

The u-boot is successfully loading the kernel image, but ends up in kernel
oops. The output is as follows:

27432 bytes read
reading uImage

3545704 bytes read
Booting kernel from Legacy Image at 48000000 ...

Image Name: Linux-3.0.42
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 3545640 Bytes = 3.4 MiB
Load Address: 40008000
Entry Point: 40008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK

Starting kernel ...

Initializing cgroup subsys cpuset
Linux version 3.0.42 (root@pawandoot) (gcc version 4.7.2 (Sourcery
CodeBench Lite 2012.09-64) ) #3https://github.com/androportal/linux-on-aakash/issues/3PREEMPT3
CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: sun5i
Memory cut off:
MALI : 0x5c000000 - 0x5fffffff ( 64 MB)
Ignoring unrecognised tag 0x00000000
Memory Reserved:
SYS : 0x43000000 - 0x4300ffff ( 64 kB)
LCD : 0x5a000000 - 0x5bffffff ( 32 MB)
VE : 0x44000000 - 0x48ffffff ( 80 MB)
Memory policy: ECC disabled, Data cache writeback
BROM Ver: 1100 1100 1625
chip-id: A13 (AW1625)
On node 0 totalpages: 114688
free_area_init_node: node 0, pgdat c06ccabc, node_mem_map c0885000
Normal zone: 896 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 113792 pages, LIFO batch:31
pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 113792
Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait
loglevel=8 panic=10
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 448MB = 448MB total
Memory: 331248k/331248k available, 127504k reserved, 0K highmem
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
vmalloc : 0xdc800000 - 0xf0000000 ( 312 MB)
lowmem : 0xc0000000 - 0xdc000000 ( 448 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.init : 0xc0008000 - 0xc0030000 ( 160 kB)
.text : 0xc0030000 - 0xc067f6d8 (6462 kB)
.data : 0xc0680000 - 0xc06d2e50 ( 332 kB)
.bss : 0xc06d2e74 - 0xc0884a78 (1736 kB)
SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
NR_IRQS:96 nr_irqs:96 96
timer0: Periodic Mode
Console: colour dummy device 80x30
ram_console: buffer (null), invalid size 0, datasize 4294967284
Calibrating delay loop... 1001.88 BogoMIPS (lpj=5009408)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
Initializing cgroup subsys cpuacct
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
CPU: Testing write buffer coherency: ok
hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters
available
devtmpfs: initialized
print_constraints: dummy:
NET: Registered protocol family 16
hw-breakpoint: debug architecture 0x4 unsupported.
SOFTWINNER DMA Driver, (c) 2003-2004,2006 Simtec Electronics
Initialize DMAC OK
bio: create slab at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Advanced Linux Sound Architecture Driver Version 1.0.24.
cfg80211: Calling CRDA to update world regulatory domain
Init eGon pin module V2.0
Switching to clocksource aw 64bits couter
FS-Cache: Loaded
CacheFiles: Loaded
Unable to handle kernel paging request at virtual address 33363a34
pgd = c0004000
[33363a34] *pgd=00000000
Internal error: Oops: 5 [#1https://github.com//issues/1]
PREEMPT
Modules linked in:
CPU: 0 Not tainted (3.0.42 #3#3
)
PC is at kmem_cache_alloc+0x74/0xc0
LR is at con_insert_unipair+0xb8/0x104
pc : [] lr : [] psr: 60000093
sp : d983bef8 ip : 00000001 fp : 00000000
r10: c06ac9bc r9 : 00000003 r8 : 0000005f
r7 : 000000d0 r6 : 0000025c r5 : d9802200 r4 : 33363a34
r3 : 20000013 r2 : c02adb14 r1 : 00000000 r0 : c0c08040
Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel
Control: 10c5387d Table: 40004019 DAC: 00000015

PC: 0xc00de34c:
e34c e1a00008 eb05eeaa eaffffb5 e92d40f8 e1a0200e e1a05000 e1a07001
e5953000
e36c e5936004 e5934000 e3540000 0a000018 e10f3000 f10c0080 e5950000
e590c000
e38c e154000c 0a000007 e3a0c000 e121f003 e35c0000 0afffff0 e3170902
1a000014
e3ac e1a00004 e8bd80f8 e5901004 e1560001 1afffff4 e5951014 e2866001
e3a0c001
e3cc e7941001 e5801000 e5951000 e5816004 eaffffed e1a00005 e1a01007
eb0f97c8
e3ec e3170902 e1a04000 0affffec e3500000 0affffea e5951010 e3510000
0affffe7
e40c e1a00004 eb05ee7a eaffffe4 e92d4070 e30b41d8 e34c4076 e1a06000
e1a05001
e42c e5943050 e3530003 0a00000f e5940030 e3500000 0a00000a e3a010d0
ebffffc2

LR: 0xc02ada94:
da94 e0844a06 e3a00000 e1a02082 e18360b2 e5953084 e0834004 e5854084
e8bd80f8
dab4 e30b31f0 e34c3076 e593001c e3500000 0a00001c e3a010d0 ebf8c221
e3500000
dad4 e7850107 0a00001e e3a03000 e1a01003 e7801003 e2833004 e3530080
1afffffb
daf4 eaffffe0 e30b31f0 e34c3076 e593001c e3500000 0a00000f e3a010d0
ebf8c210
db14 e3500000 e1a03000 e5870000 0a00000c e1a00003 e3a010ff e3a02080
ebfeb082
db34 e1a03000 eaffffd4 e3a0c010 e785c107 e1a0000c eaffffe3 e3a03010
e5873000
db54 eafffff2 e3e0000b e8bd80f8 e92d4ff0 e24dd00c e3a08000 e3053108
e58d0004
db74 e34c3077 e1a0a001 e58d3000 e1a06008 ea000003 e2866001 e2888014
e356003f

SP: 0xd983be78:
be78 00000007 d98ae180 00000000 c02d3ac4 00000000 00000000 d9802200
00000020
be98 0000040f 00000005 0000025c 000000d0 0000005f c0036250 c0c08040
00000000
beb8 c02adb14 20000013 33363a34 d9802200 0000025c 000000d0 0000005f
00000003
bed8 c06ac9bc 00000000 00000001 d983bef8 c02adb14 c00de3cc 60000093
ffffffff
bef8 c076b1f0 000023bd d98ae240 0000005f d98af1b8 c02adb14 c06acb20
00000002
bf18 c06ac9c0 d98ae240 0000005f c02ae3dc 60000013 c06acb20 c0774ee4
d9803200
bf38 c001d1c8 00000001 00000000 c0775108 00000000 c06d2e80 c001d1c8
00000000
bf58 00000000 c001c208 00000000 00000001 00000002 c001c744 c05fcb68
c013bc98

R0: 0xc0c07fc0:
7fc0 0000ffff 0000ffff 0000ffff 0000ffff 0000ffff 0000ffff 0000ffff
0000ffff
7fe0 0000ffff 0000ffff 0000ffff 0000ffff 0000ffff 0000ffff 0000ffff
0000ffff
8000 d98015c0 0000002d c0bb5020 00000000 d9802580 0000000b c0bb5040
00000000
8020 d98ae300 000002c6 c0bb65c0 00000000 d98b0100 00000936 c0bb6600
00000000
8040 33363a34 0000025b c0bb6620 00000000 d9830900 0000000d c0bb5600
00000000
8060 d986be00 0000024f c0bb5d60 00000000 d989a400 0000000c c0bb6340
00000000
8080 d9859800 00000003 c0bb5b00 00000000 d9812000 0000023c c0bb5200
00000000
80a0 d980a000 00000001 c0bb5100 00000000 d9823130 0000028f c0bb5460
00000000

R2: 0xc02ada94:
da94 e0844a06 e3a00000 e1a02082 e18360b2 e5953084 e0834004 e5854084
e8bd80f8
dab4 e30b31f0 e34c3076 e593001c e3500000 0a00001c e3a010d0 ebf8c221
e3500000
dad4 e7850107 0a00001e e3a03000 e1a01003 e7801003 e2833004 e3530080
1afffffb
daf4 eaffffe0 e30b31f0 e34c3076 e593001c e3500000 0a00000f e3a010d0
ebf8c210
db14 e3500000 e1a03000 e5870000 0a00000c e1a00003 e3a010ff e3a02080
ebfeb082
db34 e1a03000 eaffffd4 e3a0c010 e785c107 e1a0000c eaffffe3 e3a03010
e5873000
db54 eafffff2 e3e0000b e8bd80f8 e92d4ff0 e24dd00c e3a08000 e3053108
e58d0004
db74 e34c3077 e1a0a001 e58d3000 e1a06008 ea000003 e2866001 e2888014
e356003f

R5: 0xd9802180:
2180 c0c08030 00000000 00000006 00000040 00000040 00000000 00000040
00000040
21a0 00000040 00000000 00000004 00000000 00000040 00000040 00000000
d9800040
21c0 d9802140 d9802240 00000000 00000000 00000000 00000000 00000000
00000000
21e0 00000000 00000000 00000000 d9801060 ffff0000 ffff0000 ffff0000
ffff0000
2200 c0c08040 00000000 00000007 00000080 00000080 00000000 00000020
00000020
2220 00000020 00000000 00000008 00000000 00000080 00000040 00000000
d9800080
2240 d98021c0 d98022c0 00000000 00000000 00000000 00000000 00000000
00000000
2260 00000000 00000000 00000000 d9801080 ffff0000 ffff0000 ffff0000
ffff0000

R10: 0xc06ac93c:
c93c 00370036 00390038 003b003a 003d003c 003f003e 00410040 00c100c0
00c300c2
c95c 00430042 004400a9 004500d0 00ca00c8 004600cb 00480047 00cc0049
00ce00cd
c97c 004a00cf 212a004b 004d004c 004f004e 00d300d2 00d500d4 00510050
00ae0052
c99c 00540053 00d90055 00db00da 00570056 00590058 005a00dd 005c005b
005e005d
c9bc 23bd005f 0060f804 00e30061 00630062 00650064 00670066 00690068
006b006a
c9dc 006d006c 006f006e 007000f5 00720071 00740073 00760075 00780077
007900d7
c9fc 007a00fd 007c007b 007d00a6 2302007e 00fc00c7 00e200e9 00e000e4
00e700e5
ca1c 00eb00ea 00ef00e8 00ec00ee 00c500c4 00c9212b 00c600e6 00f600f4
00fb00f2
Process swapper (pid: 1, stack limit = 0xd983a2e8)
Stack: (0xd983bef8 to 0xd983c000)
bee0: c076b1f0 000023bd
bf00: d98ae240 0000005f d98af1b8 c02adb14 c06acb20 00000002 c06ac9c0
d98ae240
bf20: 0000005f c02ae3dc 60000013 c06acb20 c0774ee4 d9803200 c001d1c8
00000001
bf40: 00000000 c0775108 00000000 c06d2e80 c001d1c8 00000000 00000000
c001c208
bf60: 00000000 00000001 00000002 c001c744 c05fcb68 c013bc98 d986ee70
c0774b28
bf80: 00000000 d983a000 00000013 c001bce4 c05bad44 00000013 c00282c0
c00282c0
bfa0: c0028860 c003046c 0000005e c00377e0 00000013 34390000 00000000
00000000
bfc0: c00282c0 c0028860 c00377e0 00000000 00000000 00000000 00000000
c0008aa4
bfe0: 00000000 00000000 00000000 00000000 c00089a4 c00377e0 ffff0000
ffff0000
http://kmem_cache_alloc+0x74/0xc0 from **
http://con_insert_unipair+0xb8/0x104http://con_insert_unipair+0xb8/0x104from
http://con_set_default_unimap+0xec/0x170
http://con_set_default_unimap+0xec/0x170 from
http://console_map_init+0x40/0x50
http://console_map_init+0x40/0x50 from http://vty_init+0x198/0x1a8
http://vty_init+0x198/0x1a8 from http://tty_init+0x12c/0x144
http://tty_init+0x12c/0x144 from http://do_one_initcall+0x118/0x170
http://do_one_initcall+0x118/0x170 from http://kernel_init+0x100/0x188
http://kernel_init+0x100/0x188 from http://kernel_thread_exit+0x0/0x8
Code: 1afffff4 e5951014 e2866001 e3a0c001 (e7941001)
---[ end trace 148363d23aac6885 ]---
Kernel panic - not syncing: Attempted to kill init!
http://unwind_backtrace+0x0/0x138 from http://panic+0x70/0x184
http://panic+0x70/0x184 from http://do_exit+0x6e0/0x71c
http://do_exit+0x6e0/0x71c from < a href="die+0x264/0x2d4">
http://die+0x264/0x2d4 from http://__do_kernel_fault.part.3+0x64/0x74
http://__do_kernel_fault.part.3+0x64/0x74 from
http://do_page_fault+0x298/0x308
http://do_page_fault+0x298/0x308 from http://do_DataAbort+0x38/0x98
http://do_DataAbort+0x38/0x98 from http://__dabt_svc+0x70/0xa0
Exception stack(0xd983beb0 to 0xd983bef8)
bea0: c0c08040 00000000 c02adb14 20000013
bec0: 33363a34 d9802200 0000025c 000000d0 0000005f 00000003 c06ac9bc
00000000
bee0: 00000001 d983bef8 c02adb14 c00de3cc 60000093 ffffffff
http://__dabt_svc+0x70/0xa0 from http://kmem_cache_alloc+0x74/0xc0
http://kmem_cache_alloc+0x74/0xc0 from
http://con_insert_unipair+0xb8/0x104
http://con_insert_unipair+0xb8/0x104 from
http://con_set_default_unimap+0xec/0x170
http://con_set_default_unimap+0xec/0x170 from
http://console_map_init+0x40/0x50
http://console_map_init+0x40/0x50 from http://vty_init+0x198/0x1a8
http://vty_init+0x198/0x1a8 from http://tty_init+0x12c/0x144
http://tty_init+0x12c/0x144 from http://do_one_initcall+0x118/0x170
http://do_one_initcall+0x118/0x170 from http://kernel_init+0x100/0x188
http://kernel_init+0x100/0x188 from http://kernel_thread_exit+0x0/0x8
Rebooting in 10 seconds..

Any help will be greatly appreciated.

Regards,
Gopal

�
Reply to this email directly or view it on GitHubhttps://github.com//issues/3.

@srikantpatnaik
Copy link
Member

I mean same config file mentioned in linux-on-aakash documentation.

On Thu, Jan 17, 2013 at 9:39 PM, Srikant u.srikant.patnaik@gmail.comwrote:

I would suggest you to use the latest source from
https://github.com/linux-sunxi/linux-sunxi
You can use the same config file which is mentioned in the documentation.

On Thu, Jan 17, 2013 at 9:32 PM, gopalpradhan notifications@github.comwrote:

Hi,

I followed the steps mentioned in "linux-on-aakash" document, to
checkout, compile and create a bootable SD card.

The u-boot is successfully loading the kernel image, but ends up in
kernel oops. The output is as follows:

27432 bytes read
reading uImage

3545704 bytes read
Booting kernel from Legacy Image at 48000000 ...

Image Name: Linux-3.0.42
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 3545640 Bytes = 3.4 MiB
Load Address: 40008000
Entry Point: 40008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK

Starting kernel ...

Initializing cgroup subsys cpuset
Linux version 3.0.42 (root@pawandoot) (gcc version 4.7.2 (Sourcery
CodeBench Lite 2012.09-64) ) #3https://github.com/androportal/linux-on-aakash/issues/3PREEMPT3
CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: sun5i
Memory cut off:
MALI : 0x5c000000 - 0x5fffffff ( 64 MB)
Ignoring unrecognised tag 0x00000000
Memory Reserved:
SYS : 0x43000000 - 0x4300ffff ( 64 kB)
LCD : 0x5a000000 - 0x5bffffff ( 32 MB)
VE : 0x44000000 - 0x48ffffff ( 80 MB)
Memory policy: ECC disabled, Data cache writeback
BROM Ver: 1100 1100 1625
chip-id: A13 (AW1625)
On node 0 totalpages: 114688
free_area_init_node: node 0, pgdat c06ccabc, node_mem_map c0885000
Normal zone: 896 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 113792 pages, LIFO batch:31
pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 113792
Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait
loglevel=8 panic=10
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 448MB = 448MB total
Memory: 331248k/331248k available, 127504k reserved, 0K highmem
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
vmalloc : 0xdc800000 - 0xf0000000 ( 312 MB)
lowmem : 0xc0000000 - 0xdc000000 ( 448 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.init : 0xc0008000 - 0xc0030000 ( 160 kB)
.text : 0xc0030000 - 0xc067f6d8 (6462 kB)
.data : 0xc0680000 - 0xc06d2e50 ( 332 kB)
.bss : 0xc06d2e74 - 0xc0884a78 (1736 kB)
SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
NR_IRQS:96 nr_irqs:96 96
timer0: Periodic Mode
Console: colour dummy device 80x30
ram_console: buffer (null), invalid size 0, datasize 4294967284
Calibrating delay loop... 1001.88 BogoMIPS (lpj=5009408)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
Initializing cgroup subsys cpuacct
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
CPU: Testing write buffer coherency: ok
hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters
available
devtmpfs: initialized
print_constraints: dummy:
NET: Registered protocol family 16
hw-breakpoint: debug architecture 0x4 unsupported.
SOFTWINNER DMA Driver, (c) 2003-2004,2006 Simtec Electronics
Initialize DMAC OK
bio: create slab at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Advanced Linux Sound Architecture Driver Version 1.0.24.
cfg80211: Calling CRDA to update world regulatory domain
Init eGon pin module V2.0
Switching to clocksource aw 64bits couter
FS-Cache: Loaded
CacheFiles: Loaded
Unable to handle kernel paging request at virtual address 33363a34
pgd = c0004000
[33363a34] *pgd=00000000
Internal error: Oops: 5 [#1https://github.com//issues/1]
PREEMPT
Modules linked in:
CPU: 0 Not tainted (3.0.42 #3#3
)
PC is at kmem_cache_alloc+0x74/0xc0
LR is at con_insert_unipair+0xb8/0x104
pc : [] lr : [] psr: 60000093
sp : d983bef8 ip : 00000001 fp : 00000000
r10: c06ac9bc r9 : 00000003 r8 : 0000005f
r7 : 000000d0 r6 : 0000025c r5 : d9802200 r4 : 33363a34
r3 : 20000013 r2 : c02adb14 r1 : 00000000 r0 : c0c08040
Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel
Control: 10c5387d Table: 40004019 DAC: 00000015

PC: 0xc00de34c:
e34c e1a00008 eb05eeaa eaffffb5 e92d40f8 e1a0200e e1a05000 e1a07001
e5953000
e36c e5936004 e5934000 e3540000 0a000018 e10f3000 f10c0080 e5950000
e590c000
e38c e154000c 0a000007 e3a0c000 e121f003 e35c0000 0afffff0 e3170902
1a000014
e3ac e1a00004 e8bd80f8 e5901004 e1560001 1afffff4 e5951014 e2866001
e3a0c001
e3cc e7941001 e5801000 e5951000 e5816004 eaffffed e1a00005 e1a01007
eb0f97c8
e3ec e3170902 e1a04000 0affffec e3500000 0affffea e5951010 e3510000
0affffe7
e40c e1a00004 eb05ee7a eaffffe4 e92d4070 e30b41d8 e34c4076 e1a06000
e1a05001
e42c e5943050 e3530003 0a00000f e5940030 e3500000 0a00000a e3a010d0
ebffffc2

LR: 0xc02ada94:
da94 e0844a06 e3a00000 e1a02082 e18360b2 e5953084 e0834004 e5854084
e8bd80f8
dab4 e30b31f0 e34c3076 e593001c e3500000 0a00001c e3a010d0 ebf8c221
e3500000
dad4 e7850107 0a00001e e3a03000 e1a01003 e7801003 e2833004 e3530080
1afffffb
daf4 eaffffe0 e30b31f0 e34c3076 e593001c e3500000 0a00000f e3a010d0
ebf8c210
db14 e3500000 e1a03000 e5870000 0a00000c e1a00003 e3a010ff e3a02080
ebfeb082
db34 e1a03000 eaffffd4 e3a0c010 e785c107 e1a0000c eaffffe3 e3a03010
e5873000
db54 eafffff2 e3e0000b e8bd80f8 e92d4ff0 e24dd00c e3a08000 e3053108
e58d0004
db74 e34c3077 e1a0a001 e58d3000 e1a06008 ea000003 e2866001 e2888014
e356003f

SP: 0xd983be78:
be78 00000007 d98ae180 00000000 c02d3ac4 00000000 00000000 d9802200
00000020
be98 0000040f 00000005 0000025c 000000d0 0000005f c0036250 c0c08040
00000000
beb8 c02adb14 20000013 33363a34 d9802200 0000025c 000000d0 0000005f
00000003
bed8 c06ac9bc 00000000 00000001 d983bef8 c02adb14 c00de3cc 60000093
ffffffff
bef8 c076b1f0 000023bd d98ae240 0000005f d98af1b8 c02adb14 c06acb20
00000002
bf18 c06ac9c0 d98ae240 0000005f c02ae3dc 60000013 c06acb20 c0774ee4
d9803200
bf38 c001d1c8 00000001 00000000 c0775108 00000000 c06d2e80 c001d1c8
00000000
bf58 00000000 c001c208 00000000 00000001 00000002 c001c744 c05fcb68
c013bc98

R0: 0xc0c07fc0:
7fc0 0000ffff 0000ffff 0000ffff 0000ffff 0000ffff 0000ffff 0000ffff
0000ffff
7fe0 0000ffff 0000ffff 0000ffff 0000ffff 0000ffff 0000ffff 0000ffff
0000ffff
8000 d98015c0 0000002d c0bb5020 00000000 d9802580 0000000b c0bb5040
00000000
8020 d98ae300 000002c6 c0bb65c0 00000000 d98b0100 00000936 c0bb6600
00000000
8040 33363a34 0000025b c0bb6620 00000000 d9830900 0000000d c0bb5600
00000000
8060 d986be00 0000024f c0bb5d60 00000000 d989a400 0000000c c0bb6340
00000000
8080 d9859800 00000003 c0bb5b00 00000000 d9812000 0000023c c0bb5200
00000000
80a0 d980a000 00000001 c0bb5100 00000000 d9823130 0000028f c0bb5460
00000000

R2: 0xc02ada94:
da94 e0844a06 e3a00000 e1a02082 e18360b2 e5953084 e0834004 e5854084
e8bd80f8
dab4 e30b31f0 e34c3076 e593001c e3500000 0a00001c e3a010d0 ebf8c221
e3500000
dad4 e7850107 0a00001e e3a03000 e1a01003 e7801003 e2833004 e3530080
1afffffb
daf4 eaffffe0 e30b31f0 e34c3076 e593001c e3500000 0a00000f e3a010d0
ebf8c210
db14 e3500000 e1a03000 e5870000 0a00000c e1a00003 e3a010ff e3a02080
ebfeb082
db34 e1a03000 eaffffd4 e3a0c010 e785c107 e1a0000c eaffffe3 e3a03010
e5873000
db54 eafffff2 e3e0000b e8bd80f8 e92d4ff0 e24dd00c e3a08000 e3053108
e58d0004
db74 e34c3077 e1a0a001 e58d3000 e1a06008 ea000003 e2866001 e2888014
e356003f

R5: 0xd9802180:
2180 c0c08030 00000000 00000006 00000040 00000040 00000000 00000040
00000040
21a0 00000040 00000000 00000004 00000000 00000040 00000040 00000000
d9800040
21c0 d9802140 d9802240 00000000 00000000 00000000 00000000 00000000
00000000
21e0 00000000 00000000 00000000 d9801060 ffff0000 ffff0000 ffff0000
ffff0000
2200 c0c08040 00000000 00000007 00000080 00000080 00000000 00000020
00000020
2220 00000020 00000000 00000008 00000000 00000080 00000040 00000000
d9800080
2240 d98021c0 d98022c0 00000000 00000000 00000000 00000000 00000000
00000000
2260 00000000 00000000 00000000 d9801080 ffff0000 ffff0000 ffff0000
ffff0000

R10: 0xc06ac93c:
c93c 00370036 00390038 003b003a 003d003c 003f003e 00410040 00c100c0
00c300c2
c95c 00430042 004400a9 004500d0 00ca00c8 004600cb 00480047 00cc0049
00ce00cd
c97c 004a00cf 212a004b 004d004c 004f004e 00d300d2 00d500d4 00510050
00ae0052
c99c 00540053 00d90055 00db00da 00570056 00590058 005a00dd 005c005b
005e005d
c9bc 23bd005f 0060f804 00e30061 00630062 00650064 00670066 00690068
006b006a
c9dc 006d006c 006f006e 007000f5 00720071 00740073 00760075 00780077
007900d7
c9fc 007a00fd 007c007b 007d00a6 2302007e 00fc00c7 00e200e9 00e000e4
00e700e5
ca1c 00eb00ea 00ef00e8 00ec00ee 00c500c4 00c9212b 00c600e6 00f600f4
00fb00f2
Process swapper (pid: 1, stack limit = 0xd983a2e8)
Stack: (0xd983bef8 to 0xd983c000)
bee0: c076b1f0 000023bd
bf00: d98ae240 0000005f d98af1b8 c02adb14 c06acb20 00000002 c06ac9c0
d98ae240
bf20: 0000005f c02ae3dc 60000013 c06acb20 c0774ee4 d9803200 c001d1c8
00000001
bf40: 00000000 c0775108 00000000 c06d2e80 c001d1c8 00000000 00000000
c001c208
bf60: 00000000 00000001 00000002 c001c744 c05fcb68 c013bc98 d986ee70
c0774b28
bf80: 00000000 d983a000 00000013 c001bce4 c05bad44 00000013 c00282c0
c00282c0
bfa0: c0028860 c003046c 0000005e c00377e0 00000013 34390000 00000000
00000000
bfc0: c00282c0 c0028860 c00377e0 00000000 00000000 00000000 00000000
c0008aa4
bfe0: 00000000 00000000 00000000 00000000 c00089a4 c00377e0 ffff0000
ffff0000
http://kmem_cache_alloc+0x74/0xc0 from **
http://con_insert_unipair+0xb8/0x104http://con_insert_unipair+0xb8/0x104from
http://con_set_default_unimap+0xec/0x170
http://con_set_default_unimap+0xec/0x170 from
http://console_map_init+0x40/0x50
http://console_map_init+0x40/0x50 from http://vty_init+0x198/0x1a8
http://vty_init+0x198/0x1a8 from http://tty_init+0x12c/0x144
http://tty_init+0x12c/0x144 from http://do_one_initcall+0x118/0x170
http://do_one_initcall+0x118/0x170 from
http://kernel_init+0x100/0x188
http://kernel_init+0x100/0x188 from
http://kernel_thread_exit+0x0/0x8
Code: 1afffff4 e5951014 e2866001 e3a0c001 (e7941001)
---[ end trace 148363d23aac6885 ]---
Kernel panic - not syncing: Attempted to kill init!
http://unwind_backtrace+0x0/0x138 from http://panic+0x70/0x184
http://panic+0x70/0x184 from http://do_exit+0x6e0/0x71c
http://do_exit+0x6e0/0x71c from < a href="die+0x264/0x2d4">
http://die+0x264/0x2d4 from http://__do_kernel_fault.part.3+0x64/0x74
http://__do_kernel_fault.part.3+0x64/0x74 from
http://do_page_fault+0x298/0x308
http://do_page_fault+0x298/0x308 from http://do_DataAbort+0x38/0x98
http://do_DataAbort+0x38/0x98 from http://__dabt_svc+0x70/0xa0
Exception stack(0xd983beb0 to 0xd983bef8)
bea0: c0c08040 00000000 c02adb14 20000013
bec0: 33363a34 d9802200 0000025c 000000d0 0000005f 00000003 c06ac9bc
00000000
bee0: 00000001 d983bef8 c02adb14 c00de3cc 60000093 ffffffff
http://__dabt_svc+0x70/0xa0 from http://kmem_cache_alloc+0x74/0xc0
http://kmem_cache_alloc+0x74/0xc0 from
http://con_insert_unipair+0xb8/0x104
http://con_insert_unipair+0xb8/0x104 from
http://con_set_default_unimap+0xec/0x170
http://con_set_default_unimap+0xec/0x170 from
http://console_map_init+0x40/0x50
http://console_map_init+0x40/0x50 from http://vty_init+0x198/0x1a8
http://vty_init+0x198/0x1a8 from http://tty_init+0x12c/0x144
http://tty_init+0x12c/0x144 from http://do_one_initcall+0x118/0x170
http://do_one_initcall+0x118/0x170 from
http://kernel_init+0x100/0x188
http://kernel_init+0x100/0x188 from
http://kernel_thread_exit+0x0/0x8
Rebooting in 10 seconds..

Any help will be greatly appreciated.

Regards,
Gopal

�
Reply to this email directly or view it on GitHubhttps://github.com//issues/3.

@gopalpradhan
Copy link
Author

Thanks for your quick reply. I've downloaded the latest source also and used the config file mentioned in documentation. But still getting kernel oops at the same point.

@srikantpatnaik
Copy link
Member

In that case, I don't have instant suggestions. Though we can post this
error in kernel mailing list or raise issue in sunxi kernel link which I
mentioned before
On Jan 17, 2013 9:44 PM, "gopalpradhan" notifications@github.com wrote:

Thanks for your quick reply. I've downloaded the latest source also and
used the config file mentioned in documentation. But still getting kernel
oops at the same point.

—
Reply to this email directly or view it on GitHubhttps://github.com//issues/3#issuecomment-12374917.

@psachin
Copy link
Member

psachin commented Jan 17, 2013

We came across similar prob when setting up Ajit sir's device. be sure to
use the same kernel version mentioned in the docs. also please follow FS
instructions strictly
On Jan 17, 2013 9:51 PM, "Srikant" notifications@github.com wrote:

In that case, I don't have instant suggestions. Though we can post this
error in kernel mailing list or raise issue in sunxi kernel link which I
mentioned before
On Jan 17, 2013 9:44 PM, "gopalpradhan" notifications@github.com wrote:

Thanks for your quick reply. I've downloaded the latest source also and
used the config file mentioned in documentation. But still getting
kernel
oops at the same point.

—
Reply to this email directly or view it on GitHub<
https://github.com/androportal/linux-on-aakash/issues/3#issuecomment-12374917>.

—
Reply to this email directly or view it on GitHubhttps://github.com//issues/3#issuecomment-12375250.

@gopalpradhan
Copy link
Author

Can you share the uImage, which is working in a device. This will help in
cross-checking the health of the hardware.

On Thu, Jan 17, 2013 at 9:51 PM, Srikant notifications@github.com wrote:

In that case, I don't have instant suggestions. Though we can post this
error in kernel mailing list or raise issue in sunxi kernel link which I
mentioned before
On Jan 17, 2013 9:44 PM, "gopalpradhan" notifications@github.com wrote:

Thanks for your quick reply. I've downloaded the latest source also and
used the config file mentioned in documentation. But still getting
kernel
oops at the same point.

—
Reply to this email directly or view it on GitHub<
https://github.com/androportal/linux-on-aakash/issues/3#issuecomment-12374917>.

—
Reply to this email directly or view it on GitHubhttps://github.com//issues/3#issuecomment-12375250.

@srikantpatnaik
Copy link
Member

I have sent you uImage. I will add it on github for others to download and test.

@gopalpradhan
Copy link
Author

Please generate the uImage after setting the Kernel Hacking => Kernel low-level debugging functions (in menuconfig).

@psachin
Copy link
Member

psachin commented Jan 18, 2013

I recommend you to use your own script.bin file.

To extract script.bin from your tablet, connect the tablet using USB cable, and type adb shell
Once you are inside the shell, you need to mount your 'nanda' partition. To do this, first create a directory in /sdcard/

mkdir /sdcard/nanda

and then mount /dev/block/nanda partition to it

mount -t vfat /dev/block/nanda /sdcard/nanda

and copy it somewhere in /sdcard

cp -v /sdcard/nanda/script.bin /sdcard/

eventually pull it in your local system

$ adb pull /sdcard/script.bin

not copy this file to first partition of SDcard(FAT partition)

Note: delete previous script.bin before copying new one.

@gopalpradhan
Copy link
Author

I'm using the script.bin extracted from the aakash tablet.

On Fri, Jan 18, 2013 at 2:42 PM, sachin notifications@github.com wrote:

I recommend you use your own script.bin file.

To extract script.bin from your tablet, connect the tablet using USB
cable, and type adb shell
Once you are inside the shell, you need to mount your 'nanda' partition.
To do this, first create a directory in /sdcard/

mkdir /sdcard/nanda

and then mount /dev/block/nanda partition to it

mount -t vfat /dev/block/nanda /sdcard/nanda

and copy it somewhere in /sdcard

cp -v /sdcard/nanda/script.bin /sdcard/

eventually pull it in your local system

$ adb pull /sdcard/script.bin

not copy this file to first partition of SDcard(FAT partition)

Note: delete previous script.bin before copying new one.

—
Reply to this email directly or view it on GitHubhttps://github.com//issues/3#issuecomment-12413816.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
3 participants
@srikantpatnaik @psachin @gopalpradhan