change: removed router r3.

.travis.yml

@@ -20,7 +20,6 @@ addons:
       - cpanminus
       - build-essential
       - libncurses5-dev
-      - libpcre3-dev
       - libreadline-dev
       - libssl-dev
       - perl

.travis/linux_runner.sh

@@ -18,7 +18,6 @@ export_or_prefix() {
 
 create_lua_deps() {
     WITHOUT_DASHBOARD=1 sudo luarocks make --lua-dir=${OPENRESTY_PREFIX}/luajit rockspec/apisix-master-0.rockspec --tree=deps --only-deps --local
-    sudo luarocks install --lua-dir=${OPENRESTY_PREFIX}/luajit lua-resty-libr3 --tree=deps --local
     echo "Create lua deps cache"
     sudo rm -rf build-cache/deps
     sudo cp -r deps build-cache/

Makefile

@@ -37,17 +37,6 @@ ifeq ($(lj-releng-exist), not_exist)
 	chmod a+x utils/lj-releng
 endif
 
-### dev_r3:       Create a development ENV for r3
-.PHONY: dev_r3
-dev_r3:
-ifeq ($(UNAME),Darwin)
-	luarocks install --lua-dir=$(LUA_JIT_DIR) lua-resty-libr3 --tree=deps --local
-else ifneq ($(LUAROCKS_VER),'luarocks 3.')
-	luarocks install lua-resty-libr3 --tree=deps --local
-else
-	luarocks install --lua-dir=/usr/local/openresty/luajit lua-resty-libr3 --tree=deps --local
-endif
-
 
 ### check:        Check Lua source code
 .PHONY: check

conf/config.yaml

@@ -17,11 +17,7 @@ apisix:
   router:
     http: 'radixtree_uri'         # radixtree_uri: match route by uri(base on radixtree)
                                   # radixtree_host_uri: match route by host + uri(base on radixtree)
-                                  # r3_uri: match route by uri(base on r3)
-                                  # r3_host_uri: match route by host + uri(base on r3)
-
-    ssl: 'radixtree_sni'          # r3_sni: match route by SNI(base on r3)
-                                  # radixtree_sni: match route by SNI(base on radixtree)
+    ssl: 'radixtree_sni'          # radixtree_sni: match route by SNI(base on radixtree)
   # stream_proxy:                 # TCP/UDP proxy
   #   tcp:                        # TCP proxy port list
   #     - 9100

doc/architecture-design-cn.md

@@ -328,17 +328,15 @@ APISIX 区别于其他 API 网关的一大特点是允许用户选择不同 Rout
 在本地配置 `conf/config.yaml` 中设置最符合自身业务需求的路由。
 
 * `apisix.router.http`: HTTP 请求路由。
-    * `radixtree_uri`: （默认）只使用 `uri` 作为主索引。基于 `radix tree` 引擎，支持全量和深前缀匹配，更多见 [如何使用 router-radixtree](router-radixtree.md)。
+    * `radixtree_uri`: （默认）只使用 `uri` 作为主索引。基于 `radixtree` 引擎，支持全量和深前缀匹配，更多见 [如何使用 router-radixtree](router-radixtree.md)。
         * `绝对匹配`：完整匹配给定的 `uri` ，比如 `/foo/bar`，`/foo/glo`。
         * `前缀匹配`：末尾使用 `*` 代表给定的 `uri` 是前缀匹配。比如 `/foo*`，则允许匹配 `/foo/`、`/foo/a`和`/foo/b`等。
         * `匹配优先级`：优先尝试绝对匹配，若无法命中绝对匹配，再尝试前缀匹配。
         * `任意过滤属性`：允许指定任何 Ningx 内置变量作为过滤条件，比如 uri 请求参数、请求头、cookie 等。
-    * `r3_uri`: 只使用 `uri` 作为主索引（基于 r3 引擎）。基于 `r3` 的 trie tree 是支持正则匹配的，比如 `/foo/{:\w+}/{:\w+}`，更多见 [如何使用 router-r3](router-r3.md)。
-    * `r3_host_uri`: 使用 `host + uri` 作为主索引（基于 r3 引擎）,对当前请求会同时匹配 host 和 uri。
+    * `radixtree_host_uri`: 使用 `host + uri` 作为主索引（基于 `radixtree` 引擎），对当前请求会同时匹配 host 和 uri，支持的匹配条件与 `radixtree_uri` 基本一致。
 
 * `apisix.router.ssl`: SSL 加载匹配路由。
     * `radixtree_sni`: （默认）使用 `SNI` (Server Name Indication) 作为主索引（基于 radixtree 引擎）。
-    * `r3_sni`: 使用 `SNI` (Server Name Indication) 作为主索引（基于 r3 引擎）。
 
 [返回目录](#目录)
 

doc/architecture-design.md

@@ -322,17 +322,15 @@ A distinguishing feature of APISIX from other API gateways is that it allows use
 Set the route that best suits your business needs in the local configuration `conf/config.yaml`.
 
 * `apisix.router.http`: HTTP Request Route。
-    * `radixtree_uri`: (Default) only use `uri` as the primary index. Support for full and deep prefix matching based on the `radix tree` engine, see [How to use router-radixtree](router-radixtree.md).
+    * `radixtree_uri`: (Default) only use `uri` as the primary index. Support for full and deep prefix matching based on the `radixtree` engine, see [How to use router-radixtree](router-radixtree.md).
         * `Absolute match `: Complete match for the given `uri` , such as `/foo/bar`,`/foo/glo`.
         * `Prefix match`: Use `*` at the end to represent the given `uri` as a prefix match. For example, `/foo*` allows matching `/foo/`, `/foo/a` and `/foo/b`.
         * `match priority`: first try absolute match, if you can't hit absolute match, try prefix match.
         * `Any filter attribute`: Allows you to specify any Ningx built-in variable as a filter, such as uri request parameters, request headers, cookies, and so on.
-    * `r3_uri`: Use only `uri` as the primary index (based on the r3 engine). The trie tree based on `r3` supports regular matching, such as `/foo/{:\w+}/{:\w+}`, see [How to use router-r3](router-r3.md).
-    * `r3_host_uri`: Use `host + uri` as the primary index (based on the r3 engine), matching both host and uri for the current request.
+    * `radixtree_host_uri`: Use `host + uri` as the primary index (based on the `radixtree` engine), matching both host and uri for the current request.
 
 * `apisix.router.ssl`: SSL loads the matching route.
     * `radixtree_sni`: (Default) Use `SNI` (Server Name Indication) as the primary index (based on the radixtree engine).
-    * `r3_sni`: Use `SNI` (Server Name Indication) as the primary index (based on the r3 engine).
 
 [Back to top](#Table-of-contents)
 

doc/dev-manual-cn.md

@@ -83,7 +83,6 @@ Makefile rules:
 
     help:         Show Makefile rules.
     dev:          Create a development ENV
-    dev_r3:       Create a development ENV for r3
     check:        Check Lua source code
     init:         Initialize the runtime environment
     run:          Start the apisix server

doc/dev-manual.md

@@ -83,7 +83,6 @@ Makefile rules:
 
     help:         Show Makefile rules.
     dev:          Create a development ENV
-    dev_r3:       Create a development ENV for r3
     check:        Check Lua source code
     init:         Initialize the runtime environment
     run:          Start the apisix server

doc/doc-index.md

@@ -10,7 +10,6 @@ Reference document
 * [Health Check](health-check.md): Enable health check on the upstream node, and will automatically filter unhealthy nodes during load balancing to ensure system stability.
 * Router
     * [radixtree](router-radixtree.md)
-    * [r3](router-r3.md)
 * [Stand Alone Model](stand-alone.md): Supports to load route rules from local yaml file, it is more friendly such as under the kubernetes(k8s).
 * [Stream Proxy](stream-proxy.md)
 * [Admin API](admin-api-cn.md)

doc/install-dependencies.md

@@ -96,7 +96,7 @@ CentOS 6
 
 TODO
 
-Failed to compile `rapidjson`, and the compilation of `libr3` relies on later versions of `autoconf` and `pcre`, but the CentOS 6 comes with a lower version, will support CentOS 6 later.
+Failed to compile `rapidjson`, but the CentOS 6 comes with a lower version, will support CentOS 6 later.
 
 Mac OSX
 =======