As this has now been merged into the home-assistant/dev branch, no further development will be done on this repository/branch.

homeassistant-bme680

BME680 Sensor Platform for Home Assistant

Default sensors:

• Temperature
• Humidity
• Pressure
• Air Quality (calculated)

Optional Sensor:

• Gas Resistance

Note that the default i2c_adress is 0x77 (Adafruit board) if you have Pimorini board you will probably want 0x76. If unsure run: i2cdetect -y 1

---

Example configuration.yaml

sensor:
  - platform: bme680

Example configuration.yaml with all paramters

sensor:
  - platform: bme680
    name: BME680 Sensor
    i2c_bus: 1
    i2c_address: 0x77
    monitored_conditions:
      - temperature
      - humidity
      - pressure
      - gas
      - airquality
    oversampling_temperature: 8
    oversampling_humidity: 2
    oversampling_pressure: 4
    filter_size: 3
    gas_heater_temperature: 320
    gas_heater_duration: 150
    aq_burn_in_time: 300
    aq_humidity_baseline: 40
    aq_humidity_bias: 25

Example groups.yaml

climate:
  name: Climate
  entities:
    - sensor.bme680_sensor_temperature
    - sensor.bme680_sensor_humidity
    - sensor.bme680_sensor_pressure
    - sensor.bme680_sensor_air_quality

Example customize.yaml

sensor.bme680_sensor_temperature:
  icon: mdi:thermometer
  friendly_name: Temperature
sensor.bme680_sensor_humidity:
  icon: mdi:water
  friendly_name: Humidity
sensor.bme680_sensor_pressure:
  icon: mdi:gauge
  friendly_name: Pressure
sensor.bme680_sensor_air_quality:
  icon: mdi:blur
  friendly_name: Air Quality