Adding 9-bit support to the hardware serial UART #379
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
The new UNO R4 WIFI supports 9-bit operations on the hardware UART as per page 28.2.6 of the Renesas RA4M1 Groups: User Manual: Hardware.
There has also been a pull request to the API HardwareSerial.h file to allow for 9N1. These changes effectively put the UART into 9-bit mode and allow transmitting from the UART TDRHL 16-bit register with and without the 9th bit (wake bit) being set.
The second argument allows for turning on or off the wake bit. TRUE = wake bit set to 1 FALSE = wake bit set to 0
Example command use:
Serial1.begin(19200, SERIAL_9N1);
Serial1.write_9bit(temp[0], true);
Serial1.write_9bit(&temp[1], false, len - 1);