Updated translation files (#1249)

Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com>

i18n/af.json

@@ -192,6 +192,7 @@
       "visit": "Visit Arduino.cc"
     },
     "ide-updater": {
+      "checkForUpdates": "Check for Arduino IDE updates",
       "closeAndInstallButton": "Close and Install",
       "closeToInstallNotice": "Close the software and install the update on your machine.",
       "downloadButton": "Aflaai",
@@ -253,7 +254,7 @@
       "cloud.pull.warn": "True if users should be warned before pulling a cloud sketch. Defaults to true.",
       "cloud.push.warn": "True if users should be warned before pushing a cloud sketch. Defaults to true.",
       "cloud.pushpublic.warn": "True if users should be warned before pushing a public sketch to the cloud. Defaults to true.",
-      "cloud.sketchSyncEnpoint": "The endpoint used to push and pull sketches from a backend. By default it points to Arduino Cloud API.",
+      "cloud.sketchSyncEndpoint": "The endpoint used to push and pull sketches from a backend. By default it points to Arduino Cloud API.",
       "compile": "saamstel",
       "compile.experimental": "True if the IDE should handle multiple compiler errors. False by default",
       "compile.revealRange": "Adjusts how compiler errors are revealed in the editor after a failed verify/upload. Possible values: 'auto': Scroll vertically as necessary and reveal a line. 'center': Scroll vertically as necessary and reveal a line centered vertically. 'top': Scroll vertically as necessary and reveal a line close to the top of the viewport, optimized for viewing a code definition. 'centerIfOutsideViewport': Scroll vertically as necessary and reveal a line centered vertically only if it lies outside the viewport. The default value is '{0}'.",
@@ -271,6 +272,7 @@
       "invalid.sketchbook.location": "Invalid sketchbook location: {0}",
       "invalid.theme": "Invalid theme.",
       "language.log": "True if the Arduino Language Server should generate log files into the sketch folder. Otherwise, false. It's false by default.",
+      "language.realTimeDiagnostics": "If true, the language server provides real-time diagnostics when typing in the editor. It's false by default.",
       "manualProxy": "Manual proxy configuration",
       "network": "Netwerk",
       "newSketchbookLocation": "Select new sketchbook location",
@@ -296,6 +298,7 @@
       "newLineCarriageReturn": "Beide NL & CR",
       "noLineEndings": "No Line Ending",
       "notConnected": "Not connected. Select a board and a port to connect automatically.",
+      "openSerialPlotter": "Serial Plotter",
       "timestamp": "Tydstempel",
       "toggleTimestamp": "Toggle Timestamp"
     },

i18n/ar.json

@@ -192,6 +192,7 @@
       "visit": "زيارة Arduino.cc"
     },
     "ide-updater": {
+      "checkForUpdates": "Check for Arduino IDE updates",
       "closeAndInstallButton": "قم بالاغلاق و التحديث",
       "closeToInstallNotice": "اغلق البرمجية و حّدث الجهاز الخاص بك ",
       "downloadButton": "حمّل",
@@ -253,7 +254,7 @@
       "cloud.pull.warn": "True اذا كان يجب تحذير المستخدمين قبل سحب مشروع من السحابة . True افتراضيا",
       "cloud.push.warn": "True اذا كان يجب تحذير المستخدمين قبل دفع مشروع الى السحابة . True افتراضيا",
       "cloud.pushpublic.warn": "True اذا كان يجب تحذير المستخدمين قبل دفع مشروع عام الى السحابة . True افتراضيا",
-      "cloud.sketchSyncEnpoint": "الوجهة المستخدمة لدفع و سحب المشاريع من الخلفية . تشير افتراضيا الى Arduino Cloud API.",
+      "cloud.sketchSyncEndpoint": "الوجهة المستخدمة لدفع و سحب المشاريع من الخلفية . تشير افتراضيا الى Arduino Cloud API.",
       "compile": "الترجمة",
       "compile.experimental": "True if the IDE should handle multiple compiler errors. False by default",
       "compile.revealRange": "Adjusts how compiler errors are revealed in the editor after a failed verify/upload. Possible values: 'auto': Scroll vertically as necessary and reveal a line. 'center': Scroll vertically as necessary and reveal a line centered vertically. 'top': Scroll vertically as necessary and reveal a line close to the top of the viewport, optimized for viewing a code definition. 'centerIfOutsideViewport': Scroll vertically as necessary and reveal a line centered vertically only if it lies outside the viewport. The default value is '{0}'.",
@@ -271,6 +272,7 @@
       "invalid.sketchbook.location": "موقع ملف المشروع غير صالح : {0}",
       "invalid.theme": "سمة غير صالحة",
       "language.log": "\"True\" اذا كان مخدم اللغات الخاص بArduino يستطيع توليد سجلات الى ملف المشروع , و الا \"False\", و هي كذلك بشكل افتراضي.",
+      "language.realTimeDiagnostics": "If true, the language server provides real-time diagnostics when typing in the editor. It's false by default.",
       "manualProxy": "اعدادات الوكيل يدوياً",
       "network": "شبكة",
       "newSketchbookLocation": "اختر مكان المشروع الجديد",
@@ -296,6 +298,7 @@
       "newLineCarriageReturn": " NL & CR معاً",
       "noLineEndings": "نهاية السطر غير موجودة",
       "notConnected": "غير متصل . اختر لوحة و منفذ للاتصال تلقائيا",
+      "openSerialPlotter": "Serial Plotter",
       "timestamp": "الطابع الزمني",
       "toggleTimestamp": "تبديل الطابع الزمني"
     },

i18n/az.json

@@ -192,6 +192,7 @@
       "visit": "Ardunio cc-yi Ziyarət Edin"
     },
     "ide-updater": {
+      "checkForUpdates": "Check for Arduino IDE updates",
       "closeAndInstallButton": "Bağla Və Yüklə",
       "closeToInstallNotice": "Close the software and install the update on your machine.",
       "downloadButton": "Download",
@@ -253,7 +254,7 @@
       "cloud.pull.warn": "True if users should be warned before pulling a cloud sketch. Defaults to true.",
       "cloud.push.warn": "True if users should be warned before pushing a cloud sketch. Defaults to true.",
       "cloud.pushpublic.warn": "True if users should be warned before pushing a public sketch to the cloud. Defaults to true.",
-      "cloud.sketchSyncEnpoint": "The endpoint used to push and pull sketches from a backend. By default it points to Arduino Cloud API.",
+      "cloud.sketchSyncEndpoint": "The endpoint used to push and pull sketches from a backend. By default it points to Arduino Cloud API.",
       "compile": "compile",
       "compile.experimental": "True if the IDE should handle multiple compiler errors. False by default",
       "compile.revealRange": "Adjusts how compiler errors are revealed in the editor after a failed verify/upload. Possible values: 'auto': Scroll vertically as necessary and reveal a line. 'center': Scroll vertically as necessary and reveal a line centered vertically. 'top': Scroll vertically as necessary and reveal a line close to the top of the viewport, optimized for viewing a code definition. 'centerIfOutsideViewport': Scroll vertically as necessary and reveal a line centered vertically only if it lies outside the viewport. The default value is '{0}'.",
@@ -271,6 +272,7 @@
       "invalid.sketchbook.location": "Invalid sketchbook location: {0}",
       "invalid.theme": "Invalid theme.",
       "language.log": "True if the Arduino Language Server should generate log files into the sketch folder. Otherwise, false. It's false by default.",
+      "language.realTimeDiagnostics": "If true, the language server provides real-time diagnostics when typing in the editor. It's false by default.",
       "manualProxy": "Manual proxy configuration",
       "network": "Network",
       "newSketchbookLocation": "Select new sketchbook location",
@@ -296,6 +298,7 @@
       "newLineCarriageReturn": "Both NL & CR",
       "noLineEndings": "No Line Ending",
       "notConnected": "Not connected. Select a board and a port to connect automatically.",
+      "openSerialPlotter": "Serial Plotter",
       "timestamp": "Timestamp",
       "toggleTimestamp": "Toggle Timestamp"
     },

i18n/bg.json

@@ -192,6 +192,7 @@
       "visit": "Посетете Arduino.cc"
     },
     "ide-updater": {
+      "checkForUpdates": "Check for Arduino IDE updates",
       "closeAndInstallButton": "Close and Install",
       "closeToInstallNotice": "Close the software and install the update on your machine.",
       "downloadButton": "Download",
@@ -253,7 +254,7 @@
       "cloud.pull.warn": "True е, ако потребителите трябва да бъдат предупредени, преди да се изтегли скица от облака. По подразбиране е true.",
       "cloud.push.warn": "True, ако потребителите трябва да бъдат предупредени, преди да бъде пусната скица в облака. По подразбиране е true.",
       "cloud.pushpublic.warn": "True, ако потребителите трябва да бъдат предупредени, преди да бъде изпратена публична скица в облака. По подразбиране е true.",
-      "cloud.sketchSyncEnpoint": "Крайната точка, използвана за изпращане и изтегляне на скици от бекенда. По подразбиране той сочи към Arduino Cloud API.",
+      "cloud.sketchSyncEndpoint": "Крайната точка, използвана за изпращане и изтегляне на скици от бекенда. По подразбиране той сочи към Arduino Cloud API.",
       "compile": "компилиране",
       "compile.experimental": "True if the IDE should handle multiple compiler errors. False by default",
       "compile.revealRange": "Adjusts how compiler errors are revealed in the editor after a failed verify/upload. Possible values: 'auto': Scroll vertically as necessary and reveal a line. 'center': Scroll vertically as necessary and reveal a line centered vertically. 'top': Scroll vertically as necessary and reveal a line close to the top of the viewport, optimized for viewing a code definition. 'centerIfOutsideViewport': Scroll vertically as necessary and reveal a line centered vertically only if it lies outside the viewport. The default value is '{0}'.",
@@ -271,6 +272,7 @@
       "invalid.sketchbook.location": "Невалидно местоположение на скицника: {0}",
       "invalid.theme": "Невалидна тема.",
       "language.log": "True, ако езиковият сървър на Arduino трябва да генерира лог файлове в папката за скици. В противен случай false. По подразбиране е false.",
+      "language.realTimeDiagnostics": "If true, the language server provides real-time diagnostics when typing in the editor. It's false by default.",
       "manualProxy": "Ръчна конфигурация на прокси",
       "network": "Мрежа",
       "newSketchbookLocation": "Изберете местоположение за новата скицниката",
@@ -296,6 +298,7 @@
       "newLineCarriageReturn": "Както NL, така и CR",
       "noLineEndings": "Без край на реда",
       "notConnected": "Няма връзка. Изберете платка и порт за автоматично свързване.",
+      "openSerialPlotter": "Serial Plotter",
       "timestamp": "Печат за време",
       "toggleTimestamp": "Превключване на клеймото за време"
     },

i18n/ca_ES.json

@@ -192,6 +192,7 @@
       "visit": "Visiteu Arduino.cc"
     },
     "ide-updater": {
+      "checkForUpdates": "Check for Arduino IDE updates",
       "closeAndInstallButton": "Tanca i instal·la",
       "closeToInstallNotice": "Tanqueu el programari i instal·leu l'actualització a la vostra màquina.",
       "downloadButton": "Descarregar",
@@ -253,7 +254,7 @@
       "cloud.pull.warn": "És cert si s'ha d'avisar als usuaris abans de baixar un programa del núvol. El valor predeterminat és true.",
       "cloud.push.warn": "És cert si s'ha d'avisar als usuaris abans d'enviar un programa del núvol. El valor predeterminat és true.",
       "cloud.pushpublic.warn": "És cert si s'ha d'avisar als usuaris abans d'enviar un programa públic al núvol. El valor predeterminat és true.",
-      "cloud.sketchSyncEnpoint": "El punt final s'utilitza per a enviar i descarregar programes des d'un backend. Per defecte apunta a l'API d'Arduino Cloud.",
+      "cloud.sketchSyncEndpoint": "El punt final s'utilitza per a enviar i descarregar programes des d'un backend. Per defecte apunta a l'API d'Arduino Cloud.",
       "compile": "compilar",
       "compile.experimental": "True if the IDE should handle multiple compiler errors. False by default",
       "compile.revealRange": "Adjusts how compiler errors are revealed in the editor after a failed verify/upload. Possible values: 'auto': Scroll vertically as necessary and reveal a line. 'center': Scroll vertically as necessary and reveal a line centered vertically. 'top': Scroll vertically as necessary and reveal a line close to the top of the viewport, optimized for viewing a code definition. 'centerIfOutsideViewport': Scroll vertically as necessary and reveal a line centered vertically only if it lies outside the viewport. The default value is '{0}'.",
@@ -271,6 +272,7 @@
       "invalid.sketchbook.location": "La ubicació del quadern de programes no és vàlida: {0}",
       "invalid.theme": "Tema no vàlid.",
       "language.log": "És cert si el servidor d'idiomes Arduino hauria de generar fitxers de registre a la carpeta de programes. En cas contrari, fals. És fals per defecte.",
+      "language.realTimeDiagnostics": "If true, the language server provides real-time diagnostics when typing in the editor. It's false by default.",
       "manualProxy": "Configuració manual del proxy",
       "network": "Xarxa",
       "newSketchbookLocation": "Seleccioneu una ubicació nova del quadern de programes",
@@ -296,6 +298,7 @@
       "newLineCarriageReturn": "Ambdós NL & CR",
       "noLineEndings": "Sense final de línia",
       "notConnected": "No connectat. Seleccioneu una tarja i un port per connectar-vos automàticament.",
+      "openSerialPlotter": "Serial Plotter",
       "timestamp": "Marca de temps",
       "toggleTimestamp": "Activa o desactiva la marca de temps"
     },

i18n/cs.json

@@ -192,6 +192,7 @@
       "visit": "Navštívit Arduino.cc"
     },
     "ide-updater": {
+      "checkForUpdates": "Check for Arduino IDE updates",
       "closeAndInstallButton": "Zavřít a nainstalovat",
       "closeToInstallNotice": "Vypněte program a nainstalujte update na Váš stroj. ",
       "downloadButton": "Stáhnout",
@@ -253,7 +254,7 @@
       "cloud.pull.warn": "Ano pokud by měl být uživatel varován před stahováním cloud sketche. Ano je výchozí hodnota. ",
       "cloud.push.warn": "Ano pokud by měl být uživatel varován před odesláním cloud sketche. Ano je výchozí hodnota. ",
       "cloud.pushpublic.warn": "Ano pokud by měl být uživatel varován před odesláním veřejné sketche do cloudu. Ano je výchozí hodnota. ",
-      "cloud.sketchSyncEnpoint": "Endpoint použitý pro stahování a odesílání sketchí z backendu. Ve výchozím stavu je toto směrováno na Arduino Cloud API.",
+      "cloud.sketchSyncEndpoint": "Endpoint použitý pro stahování a odesílání sketchí z backendu. Ve výchozím stavu je toto směrováno na Arduino Cloud API.",
       "compile": "kompilovat",
       "compile.experimental": "True if the IDE should handle multiple compiler errors. False by default",
       "compile.revealRange": "Adjusts how compiler errors are revealed in the editor after a failed verify/upload. Possible values: 'auto': Scroll vertically as necessary and reveal a line. 'center': Scroll vertically as necessary and reveal a line centered vertically. 'top': Scroll vertically as necessary and reveal a line close to the top of the viewport, optimized for viewing a code definition. 'centerIfOutsideViewport': Scroll vertically as necessary and reveal a line centered vertically only if it lies outside the viewport. The default value is '{0}'.",
@@ -271,6 +272,7 @@
       "invalid.sketchbook.location": "Neplatné umístění projektů:{0}",
       "invalid.theme": "Neplatné téma.",
       "language.log": "Ano pokud by jazykový server pro Arduino měl generovat logovací soubory do složky se sketchi, jinak ne. Ne je výchozí hodnota.",
+      "language.realTimeDiagnostics": "If true, the language server provides real-time diagnostics when typing in the editor. It's false by default.",
       "manualProxy": "Ruční nastavení proxy",
       "network": "Síť",
       "newSketchbookLocation": "Zvolit nové umístění projektů",
@@ -296,6 +298,7 @@
       "newLineCarriageReturn": "Oba NL & CR",
       "noLineEndings": "Bez konce řádku",
       "notConnected": "Nepřipojen. Zvolte desku a port pro automatické připojení.",
+      "openSerialPlotter": "Serial Plotter",
       "timestamp": "Časová značka",
       "toggleTimestamp": "Přepnout časovou značku"
     },

i18n/de.json

@@ -192,6 +192,7 @@
       "visit": "Besuche Arduino.cc"
     },
     "ide-updater": {
+      "checkForUpdates": "Check for Arduino IDE updates",
       "closeAndInstallButton": "Schließen und Installieren",
       "closeToInstallNotice": "Schließe die Software und installiere das Update auf deinem Computer",
       "downloadButton": "Download",
@@ -253,7 +254,7 @@
       "cloud.pull.warn": "Wahr, wenn Benutzer vor dem Herunterladen eines Sketches aus der Cloud gewarnt werden sollen. Standardmäßig Wahr.",
       "cloud.push.warn": "Wahr, wenn Benutzer vor dem Hochladen eines Cloud-Sketches gewarnt werden sollen. Standardmäßig Wahr.",
       "cloud.pushpublic.warn": "Wahr, wenn Benutzer vor dem Hochladen eines öffentlichen Sketches in die Cloud gewarnt werden sollen. Standardmäßig Wahr.",
-      "cloud.sketchSyncEnpoint": "Der Endpunkt, um Sketches zu/von einem Backend zu laden. Standardeinstellung ist die Arduino Cloud API.",
+      "cloud.sketchSyncEndpoint": "Der Endpunkt, um Sketches zu/von einem Backend zu laden. Standardeinstellung ist die Arduino Cloud API.",
       "compile": "Kompilieren",
       "compile.experimental": "True if the IDE should handle multiple compiler errors. False by default",
       "compile.revealRange": "Adjusts how compiler errors are revealed in the editor after a failed verify/upload. Possible values: 'auto': Scroll vertically as necessary and reveal a line. 'center': Scroll vertically as necessary and reveal a line centered vertically. 'top': Scroll vertically as necessary and reveal a line close to the top of the viewport, optimized for viewing a code definition. 'centerIfOutsideViewport': Scroll vertically as necessary and reveal a line centered vertically only if it lies outside the viewport. The default value is '{0}'.",
@@ -271,6 +272,7 @@
       "invalid.sketchbook.location": "Ungültiger Sketchbook Speicherort: {0}",
       "invalid.theme": "Ungültiges Erscheinungsbild",
       "language.log": "Wahr, wenn der Arduino Language Server Logfiles in den Sketch-Ordner schreiben soll. Sonst falsch. Standardeinstellung ist falsch.\n ",
+      "language.realTimeDiagnostics": "If true, the language server provides real-time diagnostics when typing in the editor. It's false by default.",
       "manualProxy": "Manuelle Proxy Einstellung",
       "network": "Netzwerk",
       "newSketchbookLocation": "Wähle einen neuen Ort für das Sketchbook ",
@@ -296,6 +298,7 @@
       "newLineCarriageReturn": "Sowohl NL als auch CR",
       "noLineEndings": "Kein Zeilenende",
       "notConnected": "Nicht verbunden. Wählen Sie ein Board und einen Port, um automatisch zu verbinden.",
+      "openSerialPlotter": "Serial Plotter",
       "timestamp": "Zeitstempel",
       "toggleTimestamp": "Zeitstempel an/aus"
     },