Add DHT_N128 library

[nicolito128]

A library to work with DHT-type sensors (DHT11 or DHT22).

[github-actions]

❌ ERROR: Arduino Lint found errors with https://github.com/nicolito128/DHT_N128:

Linting library in DHT_N128
INFO: No header file found matching library name (DHT_N128__Library_for_DHT__Digital_Humidity_and_Temperature__Sen.h).  
      Best practices are for primary header filename to match library name.                                             
      See: https://arduino.github.io/arduino-cli/latest/library-specification/#libraryproperties-file-format            
      (Rule LS008)                                                                                                      
ERROR: library.properties name value DHT_N128: Library for DHT (Digital Humidity and Temperature) Sensors is longer than
       maximum length.                                                                                                  
       See: https://arduino.github.io/arduino-cli/latest/library-specification/#libraryproperties-file-format           
       (Rule LP009)                                                                                                     
WARNING: library.properties name value DHT_N128: Library for DHT (Digital Humidity and Temperature) Sensors is longer   
         than the recommended length of 32 characters.                                                                  
         See: https://arduino.github.io/arduino-cli/latest/library-specification/#libraryproperties-file-format         
         (Rule LP010)                                                                                                   
ERROR: Prohibited character(s) in library.properties name value: DHT_N128: Library for DHT (Digital Humidity and        
       Temperature) Sensors                                                                                             
       See: https://arduino.github.io/arduino-cli/latest/library-specification/#libraryproperties-file-format           
       (Rule LP011)                                                                                                     
WARNING: library.properties name DHT_N128: Library for DHT (Digital Humidity and Temperature) Sensors contains spaces.  
         Although supported, best practices is to not use spaces.                                                       
         See: https://arduino.github.io/arduino-cli/latest/library-specification/#libraryproperties-file-format         
         (Rule LP015)                                                                                                   
WARNING: Library name DHT_N128: Library for DHT (Digital Humidity and Temperature) Sensors contains "library". This is  
         superfluous.                                                                                                   
         See: https://arduino.github.io/arduino-cli/latest/library-specification/#libraryproperties-file-format         
         (Rule LP016)                                                                                                   
WARNING: The library.properties paragraph field repeats the sentence field. These are displayed together so redundancy  
         is not needed.                                                                                                 
         See: https://arduino.github.io/arduino-cli/latest/library-specification/#libraryproperties-file-format         
         (Rule LP036)                                                                                                   

Linter results for project: 2 ERRORS, 4 WARNINGS

-------------------

Linting sketch in DHT_N128/examples/DHT
WARNING: Sketch file/folder name mismatch. The primary sketch file name must match the folder: DHT.ino
         See: https://arduino.github.io/arduino-cli/latest/sketch-specification/#primary-sketch-file  
         (Rule SS001)                                                                                 

Linter results for project: 0 ERRORS, 1 WARNINGS

-------------------

Linter results for projects: 2 ERRORS, 5 WARNINGS

[github-actions]

Thanks for your interest in contributing to the Arduino Library Manager index @nicolito128
Please resolve the error(s) mentioned in the previous comment.

After resolving the issue, trigger this check again by doing one of the following:

• Commit the required change to the branch you submitted this pull request from.
• Comment here, mentioning @ArduinoBot in the comment.

❗ NOTE: It is not necessary to open a new pull request. ❗

More information:
https://github.com/arduino/library-registry/blob/main/README.md#if-the-problem-is-with-the-pull-request

[nicolito128]

@ArduinoBot new check, please

[github-actions]

Hello! I'm checking your submission again.

[github-actions]

Your submission has now been accepted! Thanks for your contribution to the Arduino Library Manager index.

The library(s) will be available for installation via Library Manager within a day's time.

You can check the logs from the Library Manager indexer for your library(s) here:
http://downloads.arduino.cc/libraries/logs/github.com/nicolito128/DHT_N128/