Arduino Linux microPlatform Manifest

Instructions for local builds (Arduino)

Supported MACHINE targets (tested by Arduino):

• portenta-x8 (Standard targets compatible with all carrier boards)
• portenta-x8-ebbr (Arm SystemReady IR targets)
• portenta-x8-preempt-rt (Preempt-rt patch targets) !!work in progress!!

repo init -u https://github.com/arduino/lmp-manifest.git -m arduino.xml -b release
repo sync

DISTRO=lmp-xwayland MACHINE=portenta-x8 . setup-environment
echo "ACCEPT_FSL_EULA = \"1\"" >> conf/local.conf
bitbake lmp-devel-arduino-image

DISTRO=lmp-mfgtool MACHINE=portenta-x8 . setup-environment
echo "ACCEPT_FSL_EULA = \"1\"" >> conf/local.conf
echo "MFGTOOL_FLASH_IMAGE = \"lmp-devel-arduino-image\"" >> conf/local.conf
bitbake mfgtool-files

alternatively you can build a devel image that for now doesn't have wayland support. This is currently our way to go for debugging kernel related issues and uses DISTRO lmp-base which doesn't include all the security features such as ostree, op-tee and sota that aren't strictly needed in this scenario

DISTRO=lmp-base MACHINE=portenta-x8 . setup-environment
echo "ACCEPT_FSL_EULA = \"1\"" >> conf/local.conf
bitbake lmp-devel-arduino-image

Note: To reduce bitbake parallelism (because you may want to use your computer while performing an image build) edit conf/local.conf:

+BB_NUMBER_PARSE_THREADS = "4"
+BB_NUMBER_THREADS = "4"
+PARALLEL_MAKE = "-j 4"

Instructions for local builds (Foundries.io)

Foundries.io Linux microPlatform manifest.

This directory contains a Repo manifest and setup scripts for the Linux microPlatform (LmP) build system. If you want to modify, extend or port the LmP to a new hardware platform, this is the manifest repository to use.

The build system uses various components from the Yocto Project, most importantly the OpenEmbedded build system, the bitbake task executor, and various application and BSP layers.

To configure the scripts and download the build metadata, do:

mkdir ~/bin
PATH=~/bin:$PATH

curl http://commondatastorage.googleapis.com/git-repo-downloads/repo > ~/bin/repo
chmod a+x ~/bin/repo

Run repo init to bring down the latest stable version of Repo. You must specify a URL for the manifest, which specifies the various repositories that will be placed within your working directory.

To check out the latest LmP subscriber continuous release:

repo init -u https://github.com/foundriesio/lmp-manifest

A successful initialization will end with a message stating that Repo is initialized in your working directory. Your client directory should now contain a .repo/ directory where files such as the manifest will be kept.

To pull down the metadata sources to your working directory from the repositories as specified in the LmP manifest, run:

repo sync

When downloading from behind a proxy (which is common in some corporate environments), it might be necessary to explicitly specify the proxy that is then used by repo:

export HTTP_PROXY=http://<proxy_user_id>:<proxy_password>@<proxy_server>:<proxy_port>
export HTTPS_PROXY=http://<proxy_user_id>:<proxy_password>@<proxy_server>:<proxy_port>

More rarely, Linux clients experience connectivity issues, getting stuck in the middle of downloads (typically during "Receiving objects"). Tweaking the settings of the TCP/IP stack and using non-parallel commands can improve the situation. You need root access to modify the TCP setting:

sudo sysctl -w net.ipv4.tcp_window_scaling=0
repo sync -j1

Setup Environment

Supported MACHINE targets (officially tested by Foundries):

• intel-corei7-64
• am62xx-evm
• am64xx-evm
• beaglebone-yocto
• generic-arm64
• imx6ullevk
• imx6ullevk-sec
• imx8mm-lpddr4-evk
• imx8mm-lpddr4-evk-sec
• imx8mp-lpddr4-evk
• imx8mp-lpddr4-evk-sec
• imx8mn-ddr4-evk
• imx8mn-ddr4-evk-sec
• imx8mn-lpddr4-evk
• imx8mn-lpddr4-evk-sec
• imx8mq-evk
• imx8ulp-lpddr4-evk
• imx93-11x11-lpddr4x-evk
• jetson-agx-orin-devkit
• jetson-agx-xavier-devkit
• qemuarm64-secureboot
• raspberrypi4-64
• stm32mp15-disco
• stm32mp15-eval
• stm32mp15-eval-sec
• kv260
• vck190-versal

Supported image targets:

• lmp-mini-image - minimal OSTree + OTA capable image
• lmp-base-console-image - mini-image + Docker container runtime
• lmp-gateway-image - base-console-image + edge gateway related utilities
• lmp-factory-image - default (and only available) for a FoundriesFactory
• mfgtool-files - (only for DISTRO=lmp-mfgtool) image flasher via USB SDP/FastBoot for i.MX-based machines

The default distribution (DISTRO) variable is automatically set to lmp, which is provided by the meta-lmp layer.

Setup the work environment by using the setup-environment script:

[MACHINE=<MACHINE>] source setup-environment [BUILDDIR]

If MACHINE is not provided, the script will list all possible machines and force one to be selected.

To build the LmP base console image:

bitbake lmp-base-console-image

Issues and Support

Please report any bugs, issues or suggestions at https://support.foundries.io.