Skip to content
  • Past due by about 5 years Last updated about 5 years ago

    The sales package should include a USB Reference Design board, moun…

    The sales package should include a USB Reference Design board, mounted on a heat sink, be equipped with adapter cables to connect it to a PC (GUI support) and a USB stick with documentation and collaterals.

    USB stick contents:

    • Presentation material about the board, test results and feature description
    • design file package including schematics and layout files (PDF)
    • Source code
    • GUI setup program
    • user guide (short)

  • Past due by about 5 years Last updated about 5 years ago

    CES takes place on January 7-10 in Las Vegas. The demo provided sho…

    CES takes place on January 7-10 in Las Vegas. The demo provided should include two USB PD Reference Designs (one for the setup, a second one as replacement) and a tablet (e.g. Microsoft Surface Go) which can run the GUI and would also be used as load.

    Note:

    • USB PD Ref Design Boards need to be equipped with heat sink and adapter cables.
    • The GUI must be installed and tested on the tablet
    • Further loads like Chromebooks, power banks or phones are appreciated :-)

  • Past due by almost 5 years Last updated about 5 years ago

    APEC 2020 takes place on March 15-19 2020 in New Orleans. For this …

    APEC 2020 takes place on March 15-19 2020 in New Orleans.

    For this show the USB PD reference Design should be mounted on a wedge and being connected to a PC. The Wedge should include a PASSMARK USB PD Tester to run more comprehensive tests scenarios at the booth. Additional loads like Chromebooks, power banks or phones should be available.

    Wedge PC:

    • Lenovo ThinkCentre M Tiny Serie (built into wedge)
    • 15" USB monitor