Add support for HM-10

Add support for MI-BLE sensors using HM-10 Bluetooth 4.0 module by Christian Staars (#7683)
arendst · Feb 7, 2020 · 15df54b · 15df54b
1 parent 15a9c85
commit 15df54b
Show file tree

Hide file tree

Showing 6 changed files with 32 additions and 19 deletions.
diff --git a/RELEASENOTES.md b/RELEASENOTES.md
@@ -92,5 +92,5 @@ The following binary downloads have been compiled with ESP8266/Arduino library c
 - Add SoftwareSerial to CSE7766 driver allowing different GPIOs (#7563)
 - Add optional parameter <startcolor> to command ``Scheme <scheme>, <startcolor>`` to control initial start color
 - Add rule trigger on one level deeper using syntax with two ``#`` like ``on zigbeereceived#vibration_sensor#aqaracubeside=0 do ...``
-- Add support for sensor DS18x20 on Shelly 1 and Shelly 1PM using Shelly Add-On adapter (#7469)
-- Add support for sensor DHT family on Shelly 1 and Shelly 1PM using Shelly Add-On adapter (#7469)
+- Add support for sensors DS18x20 and DHT family on Shelly 1 and Shelly 1PM using Shelly Add-On adapter (#7469)
+- Add support for MI-BLE sensors using HM-10 Bluetooth 4.0 module by Christian Staars (#7683)
diff --git a/tasmota/CHANGELOG.md b/tasmota/CHANGELOG.md
@@ -3,10 +3,10 @@
 ### 8.1.0.6 20200205
 
 - Fix Hass sensor discovery part 1/4 by Federico Leoni (#7582, #7548)
-- Add support for sensor DS18x20 on Shelly 1 and Shelly 1PM using Shelly Add-On adapter (#7469)
-- Add support for sensor DHT family on Shelly 1 and Shelly 1PM using Shelly Add-On adapter (#7469)
+- Add support for sensors DS18x20 and DHT family on Shelly 1 and Shelly 1PM using Shelly Add-On adapter (#7469)
 - Add commands ``SwitchMode 11`` PushHoldMulti and ``SwitchMode 12`` PushHoldInverted (#7603)
 - Add command ``Buzzer -1`` for infinite mode and command ``Buzzer -2`` for following led mode (#7623)
+- Add support for MI-BLE sensors using HM-10 Bluetooth 4.0 module by Christian Staars (#7683)
 
 ### 8.1.0.5 20200126
 

diff --git a/tasmota/my_user_config.h b/tasmota/my_user_config.h
@@ -540,9 +540,9 @@
 //  #define USE_PN532_DATA_RAW                     // Allow DATA block to be used by non-alpha-numberic data (+ 80 bytes code, 48 bytes ram)
 //#define USE_RDM6300                              // Add support for RDM6300 125kHz RFID Reader (+0k8)
 //#define USE_IBEACON                              // Add support for bluetooth LE passive scan of ibeacon devices (uses HM17 module)
-//#define USE_GPS                                  // Add support for GPS and NTP Server for becoming Stratus 1 Time Source (+ 3.1kb flash, +132 bytes RAM)
-//  #define USE_FLOG                               // Add support for GPS logging in OTA's Flash (Experimental) (+ 2.9kb flash, +8 bytes RAM)
-//#define USE_HM10                                   // Add support for HM-10 as a BLE-bridge for the LYWSD03 (+... code)
+//#define USE_GPS                                  // Add support for GPS and NTP Server for becoming Stratus 1 Time Source (+3k1 code, +132 bytes RAM)
+//  #define USE_FLOG                               // Add support for GPS logging in OTA's Flash (Experimental) (+2k9 code, +8 bytes RAM)
+//#define USE_HM10                                 // Add support for HM-10 as a BLE-bridge for the LYWSD03 (+5k1 code)
 
 // -- Power monitoring sensors --------------------
 #define USE_ENERGY_MARGIN_DETECTION              // Add support for Energy Margin detection (+1k6 code)

diff --git a/tasmota/support_features.ino b/tasmota/support_features.ino
@@ -484,27 +484,33 @@ void GetFeatures(void)
   feature5 |= 0x00020000;  // xsns_55_hih_series.ino
 #endif
 #ifdef USE_HPMA
-  feature5 |= 0x00040000;
+  feature5 |= 0x00040000;  // xsns_56_hpma.ino
 #endif
 #ifdef USE_TSL2591
-  feature5 |= 0x00080000;
+  feature5 |= 0x00080000;  // xsns_57_tsl2591.ino
 #endif
 #ifdef USE_DHT12
-  feature5 |= 0x00100000;
+  feature5 |= 0x00100000;  // xsns_58_dht12.ino
 #endif
 #ifdef USE_DS1624
-  feature5 |= 0x00200000;
+  feature5 |= 0x00200000;  // xsns_59_ds1624.ino
 #endif
 #ifdef USE_GPS
-  feature5 |= 0x00400000;
+  feature5 |= 0x00400000;  // xsns_60_GPS.ino
 #endif
 #ifdef USE_HOTPLUG
-  feature5 |= 0x00800000;
+  feature5 |= 0x00800000;  // xdrv_32_hotplug.ino
+#endif
+#ifdef USE_NRF24
+  feature5 |= 0x01000000;  // xsns_33_nrf24l01.ino
+#endif
+#ifdef USE_MIBLE
+  feature5 |= 0x02000000;  // xsns_61_MI_BLE.ino
+#endif
+#ifdef USE_HM10
+  feature5 |= 0x04000000;  // xsns_62_MI_HM10.ino
 #endif
 
-//  feature5 |= 0x01000000;
-//  feature5 |= 0x02000000;
-//  feature5 |= 0x04000000;
 //  feature5 |= 0x08000000;
 
 //  feature5 |= 0x10000000;

diff --git a/tasmota/tasmota_post.h b/tasmota/tasmota_post.h
@@ -185,6 +185,7 @@ extern "C" void custom_crash_callback(struct rst_info * rst_info, uint32_t stack
 #define USE_RDM6300                              // Add support for RDM6300 125kHz RFID Reader (+0k8)
 #define USE_IBEACON                              // Add support for bluetooth LE passive scan of ibeacon devices (uses HM17 module)
 //#define USE_GPS                                  // Add support for GPS and NTP Server for becoming Stratus 1 Time Source (+ 3.1kb flash, +132 bytes RAM)
+#define USE_HM10                                 // Add support for HM-10 as a BLE-bridge for the LYWSD03 (+5k1 code)
 
 #define USE_ENERGY_SENSOR                        // Add energy sensors (-14k code)
 #define USE_PZEM004T                             // Add support for PZEM004T Energy monitor (+2k code)
@@ -388,6 +389,7 @@ extern "C" void custom_crash_callback(struct rst_info * rst_info, uint32_t stack
 #undef USE_RDM6300                               // Disable support for RDM6300 125kHz RFID Reader (+0k8)
 #undef USE_IBEACON                               // Disable support for bluetooth LE passive scan of ibeacon devices (uses HM17 module)
 #undef USE_GPS                                   // Disable support for GPS and NTP Server for becoming Stratus 1 Time Source (+ 3.1kb flash, +132 bytes RAM)
+#undef USE_HM10                                  // Disable support for HM-10 as a BLE-bridge for the LYWSD03 (+5k1 code)
 
 //#define USE_DHT                                  // Add support for DHT11, AM2301 (DHT21, DHT22, AM2302, AM2321) and SI7021 Temperature and Humidity sensor
 #undef USE_MAX31855                              // Disable MAX31855 K-Type thermocouple sensor using softSPI
@@ -480,6 +482,7 @@ extern "C" void custom_crash_callback(struct rst_info * rst_info, uint32_t stack
 #undef USE_RDM6300                               // Disable support for RDM6300 125kHz RFID Reader (+0k8)
 #undef USE_IBEACON                               // Disable support for bluetooth LE passive scan of ibeacon devices (uses HM17 module)
 #undef USE_GPS                                   // Disable support for GPS and NTP Server for becoming Stratus 1 Time Source (+ 3.1kb flash, +132 bytes RAM)
+#undef USE_HM10                                  // Disable support for HM-10 as a BLE-bridge for the LYWSD03 (+5k1 code)
 
 //#undef USE_ENERGY_SENSOR                         // Disable energy sensors
 #undef USE_PZEM004T                              // Disable PZEM004T energy sensor
@@ -593,6 +596,7 @@ extern "C" void custom_crash_callback(struct rst_info * rst_info, uint32_t stack
 #undef USE_RDM6300                               // Disable support for RDM6300 125kHz RFID Reader (+0k8)
 #undef USE_IBEACON                               // Disable support for bluetooth LE passive scan of ibeacon devices (uses HM17 module)
 #undef USE_GPS                                   // Disable support for GPS and NTP Server for becoming Stratus 1 Time Source (+ 3.1kb flash, +132 bytes RAM)
+#undef USE_HM10                                  // Disable support for HM-10 as a BLE-bridge for the LYWSD03 (+5k1 code)
 
 #undef USE_ENERGY_SENSOR                         // Disable energy sensors
 #undef USE_PZEM004T                              // Disable PZEM004T energy sensor

diff --git a/tools/decode-status.py b/tools/decode-status.py
@@ -136,7 +136,10 @@
     "Enable shutter support",
     "Invert PCF8574 ports"
     ],[
-    "","","","",
+    "Reduced CT range for Alexa",
+    "Use FriendlyNames instead of ShortAddresses when possible",
+    "(AWS IoT) publish MQTT state to a device shadow",
+    "",
     "","","","",
     "","","","",
     "","","","",
@@ -189,7 +192,7 @@
     "USE_SONOFF_SC","USE_SONOFF_RF","USE_SONOFF_L1","USE_EXS_DIMMER",
     "USE_ARDUINO_SLAVE","USE_HIH6","USE_HPMA","USE_TSL2591",
     "USE_DHT12","USE_DS1624","USE_GPS","USE_HOTPLUG",
-    "","","","",
+    "USE_NRF24","USE_MIBLE","USE_HM10","",
     "","","",""
     ]]
 
@@ -224,7 +227,7 @@
         obj = json.load(fp)
 
 def StartDecode():
-    print ("\n*** decode-status.py v20190819 by Theo Arends and Jacek Ziolkowski ***")
+    print ("\n*** decode-status.py v20200207 by Theo Arends and Jacek Ziolkowski ***")
 
 #    print("Decoding\n{}".format(obj))