Update changelogs

arendst · Jul 24, 2023 · 978a212 · 978a212
1 parent 0ddcea9
commit 978a212
Show file tree

Hide file tree

Showing 8 changed files with 13 additions and 5 deletions.
diff --git a/BUILDS.md b/BUILDS.md
@@ -128,6 +128,7 @@ Note: `minimal` variant is not listed as it shouldn't be used outside of the [up
 | USE_MCP23XXX_DRV          | - | - / - | - | - | - | - |
 | USE_PCA9632               | - | - / - | - | - | - | - |
 | USE_PCA9685               | - | - / - | - | - | - | - |
+| USE_PCA9685_V2            | - | - / - | - | - | - | - |
 | USE_MPR121                | - | - / - | - | - | - | - |
 | USE_CCS811                | - | - / - | - | x | - | - |
 | USE_CCS811_V2             | - | - / x | - | - | - | - |

diff --git a/CHANGELOG.md b/CHANGELOG.md
@@ -6,6 +6,7 @@ All notable changes to this project will be documented in this file.
 ## [13.0.0.3]
 ### Added
 - Support for MAX17043 fuel-gauge systems Lipo batteries (#18788)
+- Support for multiple PCA9685 with extended functionality (#18805)
 
 ### Breaking Changed
 
@@ -14,7 +15,7 @@ All notable changes to this project will be documented in this file.
 
 ### Fixed
 - Initial battery level percentage (#19160)
-- Berry SK6812_GRBW crash
+- Berry SK6812_GRBW crash (#19166)
 
 ### Removed
 

diff --git a/I2CDEVICES.md b/I2CDEVICES.md
@@ -9,6 +9,7 @@ The following table lists the supported I2C devices
 Index | Define              | Driver   | Device   | Address(es) | Description
 ------|---------------------|----------|----------|-------------|-----------------------------------------------
    1  | USE_PCA9685         | xdrv_15  | PCA9685  | 0x40 - 0x47 | 16-channel 12-bit pwm driver
+   1  | USE_PCA9685_V2      | xdrv_15  | PCA9685  | 0x40 - 0x47 | 16-channel 12-bit pwm driver
    2  | USE_PCF8574         | xdrv_28  | PCF8574  | 0x20 - 0x26 | 8-bit I/O expander (address range overridable)
    2  | USE_PCF8574         | xdrv_28  | PCF8574A | 0x39 - 0x3F | 8-bit I/O expander (address range overridable)
    3  | USE_DISPLAY_LCD     | xdsp_01  |          | 0x27, 0x3F  | LCD display

diff --git a/RELEASENOTES.md b/RELEASENOTES.md
@@ -116,6 +116,7 @@ The latter links can be used for OTA upgrades too like ``OtaUrl https://ota.tasm
 - Command ``Delay -1`` to wait until next second [#18984](https://github.com/arendst/Tasmota/issues/18984)
 - Command ``Restart 9`` to save all changes and go into deepsleep waiting for a reset [#19024](https://github.com/arendst/Tasmota/issues/19024)
 - Support for MAX17043 fuel-gauge systems Lipo batteries [#18788](https://github.com/arendst/Tasmota/issues/18788)
+- Support for multiple PCA9685 with extended functionality [#18805](https://github.com/arendst/Tasmota/issues/18805)
 - Support for SGP41 TVOC/NOx Sensor [#18880](https://github.com/arendst/Tasmota/issues/18880)
 - Support for DeepSleep battery level percentage [#19134](https://github.com/arendst/Tasmota/issues/19134)
 - Berry `getgbl` performance counter to `debug.counters()` [#19070](https://github.com/arendst/Tasmota/issues/19070)

diff --git a/tasmota/include/tasmota_configurations.h b/tasmota/include/tasmota_configurations.h
@@ -107,6 +107,7 @@
 //#define USE_MCP230xx                           // [I2cDriver22] Enable MCP23008/MCP23017 - Must define I2C Address in #define USE_MCP230xx_ADDR below - range 0x20 - 0x27 (+4k7 code)
 //#define USE_MCP23XXX_DRV                       // [I2cDriver77] Enable MCP23xxx support as virtual switch/button/relay (+3k(I2C)/+5k(SPI) code)
 //#define USE_PCA9685                            // [I2cDriver1] Enable PCA9685 I2C HW PWM Driver - Must define I2C Address in #define USE_PCA9685_ADDR below - range 0x40 - 0x47 (+1k4 code)
+//#define USE_PCA9685_V2                         // [I2cDriver1] Enable PCA9685 I2C HW PWM Driver - Must define I2C Address in #define USE_PCA9685_ADDR below - range 0x40 - 0x47 (+3k4 code)
 //#define USE_MPR121                             // [I2cDriver23] Enable MPR121 controller (I2C addresses 0x5A, 0x5B, 0x5C and 0x5D) in input mode for touch buttons (+1k3 code)
 #define USE_CCS811                             // [I2cDriver24] Enable CCS811 sensor (I2C address 0x5A) (+2k2 code)
 //#define USE_CCS811_V2                          // [I2cDriver24] Enable CCS811 sensor (I2C addresses 0x5A and 0x5B) (+2k8 code)

diff --git a/tasmota/include/tasmota_configurations_ESP32.h b/tasmota/include/tasmota_configurations_ESP32.h
@@ -384,6 +384,7 @@
 //#define USE_MCP230xx                           // [I2cDriver22] Enable MCP23008/MCP23017 - Must define I2C Address in #define USE_MCP230xx_ADDR below - range 0x20 - 0x27 (+4k7 code)
 #define USE_MCP23XXX_DRV                       // [I2cDriver77] Enable MCP23xxx support as virtual switch/button/relay (+3k(I2C)/+5k(SPI) code)
 //#define USE_PCA9685                            // [I2cDriver1] Enable PCA9685 I2C HW PWM Driver - Must define I2C Address in #define USE_PCA9685_ADDR below - range 0x40 - 0x47 (+1k4 code)
+//#define USE_PCA9685_V2                         // [I2cDriver1] Enable PCA9685 I2C HW PWM Driver - Must define I2C Address in #define USE_PCA9685_ADDR below - range 0x40 - 0x47 (+3k4 code)
 //#define USE_MPR121                             // [I2cDriver23] Enable MPR121 controller (I2C addresses 0x5A, 0x5B, 0x5C and 0x5D) in input mode for touch buttons (+1k3 code)
 //#define USE_CCS811                             // [I2cDriver24] Enable CCS811 sensor (I2C address 0x5A) (+2k2 code)
 //#define USE_CCS811_V2                          // [I2cDriver24] Enable CCS811 sensor (I2C addresses 0x5A and 0x5B) (+2k8 code)
@@ -618,6 +619,7 @@
 //#define USE_MCP230xx                           // [I2cDriver22] Enable MCP23008/MCP23017 - Must define I2C Address in #define USE_MCP230xx_ADDR below - range 0x20 - 0x27 (+4k7 code)
 #define USE_MCP23XXX_DRV                       // [I2cDriver77] Enable MCP23xxx support as virtual switch/button/relay (+3k(I2C)/+5k(SPI) code)
 //#define USE_PCA9685                            // [I2cDriver1] Enable PCA9685 I2C HW PWM Driver - Must define I2C Address in #define USE_PCA9685_ADDR below - range 0x40 - 0x47 (+1k4 code)
+//#define USE_PCA9685_V2                         // [I2cDriver1] Enable PCA9685 I2C HW PWM Driver - Must define I2C Address in #define USE_PCA9685_ADDR below - range 0x40 - 0x47 (+3k4 code)
 //#define USE_MPR121                             // [I2cDriver23] Enable MPR121 controller (I2C addresses 0x5A, 0x5B, 0x5C and 0x5D) in input mode for touch buttons (+1k3 code)
 //#define USE_CCS811                             // [I2cDriver24] Enable CCS811 sensor (I2C address 0x5A) (+2k2 code)
 #define USE_CCS811_V2                          // [I2cDriver24] Enable CCS811 sensor (I2C addresses 0x5A and 0x5B) (+2k8 code)

diff --git a/tasmota/my_user_config.h b/tasmota/my_user_config.h
@@ -616,6 +616,7 @@
 //    #define USE_MCP230xx_DISPLAYOUTPUT           // Enable MCP23008/MCP23017 to display state of OUTPUT pins on Web UI (+0k2 code)
 //  #define USE_MCP23XXX_DRV                       // [I2cDriver77] Enable MCP23xxx support as virtual switch/button/relay (+3k(I2C)/+5k(SPI) code)
 //  #define USE_PCA9685                            // [I2cDriver1] Enable PCA9685 I2C HW PWM Driver - Must define I2C Address in #define USE_PCA9685_ADDR below - range 0x40 - 0x47 (+1k4 code)
+//  #define USE_PCA9685_V2                         // [I2cDriver1] Enable PCA9685 I2C HW PWM Driver - Must define I2C Address in #define USE_PCA9685_ADDR below - range 0x40 - 0x47 (+3k4 code)
 //    #define USE_PCA9685_ADDR 0x40                // Enable PCA9685 I2C Address to use (Must be within range 0x40 through 0x47 - set according to your wired setup)
 //    #define USE_PCA9685_FREQ 50                  // Define default PWM frequency in Hz to be used (must be within 24 to 1526) - If other value is used, it will rever to 50Hz
 //  #define USE_PCA9632                            // [I2cDriver75] Enable PCA9632 I2C HW PWM Driver (+1k8 code)

diff --git a/tasmota/tasmota_support/support_features.ino b/tasmota/tasmota_support/support_features.ino
@@ -167,8 +167,8 @@ void ResponseAppendFeatures(void)
 #ifdef USE_MP3_PLAYER
     feature2 |= 0x00002000;  // xdrv_14_mp3.ino
 #endif
-#if defined(USE_I2C) && defined(USE_PCA9685)
-    feature2 |= 0x00004000;  // xdrv_15_pca9685.ino
+#if defined(USE_I2C) && (defined(USE_PCA9685) || defined(USE_PCA9685_V2))
+    feature2 |= 0x00004000;  // xdrv_15_pca9685.ino or xdrv_15_pca9685_v2.ino
 #endif
 #if defined(USE_LIGHT) && defined(USE_TUYA_MCU)
     feature2 |= 0x00008000;  // xdrv_16_tuyadimmer.ino
@@ -331,8 +331,8 @@ void ResponseAppendFeatures(void)
 #if defined(USE_I2C) && defined(USE_MPR121)
     feature4 |= 0x00000002;  // xsns_30_mpr121.ino
 #endif
-#if defined(USE_I2C) && defined(USE_CCS811)
-    feature4 |= 0x00000004;  // xsns_31_ccs811.ino
+#if defined(USE_I2C) && (defined(USE_CCS811) || defined(USE_CCS811_V2))
+    feature4 |= 0x00000004;  // xsns_31_ccs811.ino or xsns_31_ccs811_v2.ino
 #endif
 #if defined(USE_I2C) && defined(USE_MPU6050)
     feature4 |= 0x00000008;  // xsns_32_mpu6050.ino