Release 6.6

Release 6.6

.gitignore

@@ -9,6 +9,11 @@
 .gcc-flags.json
 sonoff/user_config_override.h
 build
+firmware.map
 
 ## Visual Studio Code specific ######
 .vscode
+.vscode/.browse.c_cpp.db*
+.vscode/c_cpp_properties.json
+.vscode/launch.json
+*.bak

API.md

@@ -1,4 +1,7 @@
-## Sonoff-Tasmota basic API information
+<img src="/tools/logo/TASMOTA_FullLogo_Vector.svg" alt="Logo" align="right" height="76"/>
+
+# Basic API information
+
 Sonoff-Tasmota can easily be extended by developers using provided function pointers as callback Ids. This document lists the available callback function Ids. See the wiki (https://github.com/arendst/Sonoff-Tasmota/wiki/Sensor-API) for more information.
 
 Callback availability can be checked by searching for either XdrvCall, XsnsCall, XdspCall and XnrgCall.

CONTRIBUTING.md

@@ -1,4 +1,6 @@
-# Contributing to Sonoff-Tasmota
+<img src="/tools/logo/TASMOTA_FullLogo_Vector.svg" alt="Logo" align="right" height="76"/>
+
+# Contributing
 
 **Any contribution helps our team and makes Tasmota better for the entire community!**
 
@@ -26,7 +28,7 @@ This document describes rules that are in effect for this repository, meant for
 1.	Any contributor to the project can participate in the triaging process, if he/she chooses to do so.
 2.	An issue that needs to be closed, either due to not complying with this policy, or for other reasons, should be closed by a contributor.
 3.	Issues that are accepted should be marked with appropriate labels.
-4.	Issues that could impact functionality for many users should be considered severe. 
+4.	Issues that could impact functionality for many users should be considered severe.
 5.	Issues caused by the SDK or chip should not be marked severe, as there usually isn’t much to be done. Common sense should be applied when deciding. Such issues should be documented in the Wiki, for reference by users.
 6.	Issues with feature requests should be discussed for viability/desirability.
 7.	Feature requests or changes that are meant to address a very specific/limited use case, especially if at the expense of increased code complexity, may be denied, or may be required to be redesigned, generalized, or simplified.
@@ -56,7 +58,57 @@ The process is straight-forward.
 7. All pull requests should consider updates to the documentation.
 8. Pull requests that address an outstanding issue, particularly an issue deemed to be severe, should be given priority.
 9. If a PR is accepted, then it should undergo review and updated based on the feedback provided, then merged.
-10. Pull requests that don't meet the above will be denied and closed.
+10. By submitting a PR, it is needed to use the provided PR template and check all boxes, performing the required tasks and accepting the CLA.
+11. Pull requests that don't meet the above will be denied and closed.
+
+--------------------------------------
+
+## Contributor License Agreement (CLA)
+
+```
+By making a contribution to this project, I certify that:
+
+(a) The contribution was created in whole or in part by me and I
+    have the right to submit it under the GPL-3.0 license; or
+
+(b) The contribution is based upon previous work that, to the best
+    of my knowledge, is covered under an appropriate open source
+    license and I have the right under that license to submit that
+    work with modifications, whether created in whole or in part
+    by me, under the GPL-3.0 license; or
+
+(c) The contribution was provided directly to me by some other
+    person who certified (a), (b) or (c) and I have not modified
+    it.
+
+(d) I understand and agree that this project and the contribution
+    are public and that a record of the contribution (including all
+    personal information I submit with it) is maintained indefinitely
+    and may be redistributed consistent with this project or the open
+    source license(s) involved.
+```
+
+This Contributor License Agreement (CLA) was adopted on April 1st, 2019.
+
+The text of this license is available under the [Creative Commons Attribution-ShareAlike 3.0 Unported License](http://creativecommons.org/licenses/by-sa/3.0/).  It is based on the Linux [Developer Certificate Of Origin](http://elinux.org/Developer_Certificate_Of_Origin), but is modified to explicitly use the GPL-3.0 license and not mention sign-off (due to GitHub.com keeps an historial, with your user name, of PRs' commits and all editions on PR's comments).
+
+To accept the CLA it is required to put a x between [ ] on `[ ] I accept the CLA` in the PR template when submitting it. The [ ] is an opt-in box, so you have to manually accept it.
+
+**Why a CLA ?**
+
+_"A Contributor Licence Agreement (CLA) is strongly recommended when accepting third party contributions to an open development project, such as an open source software project. In order to redistribute contributions, it is necessary to ensure that the project has the necessary rights to do so. A Contributor Licence Agreement is a lightweight agreement, signed by the copyright holder, that grants the necessary rights for the contribution to be redistributed as part of the project."_ [OSS Watch](http://oss-watch.ac.uk/resources/cla)
+
+A CLA is a legal document in which you state _you are entitled to contribute the code/documentation/translation to the project_ you’re contributing to and that _you are willing to have it used in distributions and derivative works_. This means that should there be any kind of legal issue in the future as to the origins and ownership of any particular piece of code, then that project has the necessary forms on file from the contributor(s) saying they were permitted to make this contribution.
+
+CLA is a safety because it also ensures that once you have provided a contribution, you cannot try to withdraw permission for its use at a later date. People can therefore use that software, confident that they will not be asked to stop using pieces of the code at a later date.
+
+A __license__ grants "outbound" rights to the user of project.
+
+A __CLA__ enables a contributor to grant "inbound" rights to a project.
+
+
+
+
 
 <Other>
 <A table should be maintained for relating maintainers and components. When triaging, this is essential to figure out if someone in particular should be consulted about specific changes.>

README.md

@@ -1,6 +1,6 @@
 ## Sonoff-Tasmota
 
-Alternative firmware for _ESP8266 based devices_ like [iTead](https://www.itead.cc/) _**Sonoff**_ with **web UI, rules and timers, OTA updates, custome device templates and sensors support**. Allows control over **MQTT**, **HTTP**, **Serial** and **KNX** for integrations with smart home systems. Written for Arduino IDE and PlatformIO.
+<img src="/tools/logo/TASMOTA_FullLogo_Vector.svg" alt="Logo" align="right" height="90"/>Alternative firmware for _ESP8266 based devices_ like [iTead](https://www.itead.cc/) _**Sonoff**_ with **web UI, rules and timers, OTA updates, custom device templates and sensor support**. Allows control over **MQTT**, **HTTP**, **Serial** and **KNX** for integrations with smart home systems. Written for Arduino IDE and PlatformIO.
 
 [![GitHub version](https://img.shields.io/github/release/arendst/Sonoff-Tasmota.svg)](https://github.com/arendst/Sonoff-Tasmota/releases/latest)
 [![GitHub download](https://img.shields.io/github/downloads/arendst/Sonoff-Tasmota/total.svg)](https://github.com/arendst/Sonoff-Tasmota/releases/latest)
@@ -15,31 +15,31 @@ If you like **Sonoff-Tasmota**, give it a star, or fork it and contribute!
 
 See [RELEASENOTES.md](https://github.com/arendst/Sonoff-Tasmota/blob/master/RELEASENOTES.md) for release information.
 
-In addition to the [release webpage](https://github.com/arendst/Sonoff-Tasmota/releases/latest) the binaries can also be OTA downloaded from http://thehackbox.org/tasmota/release/
+In addition to the [release webpage](https://github.com/arendst/Sonoff-Tasmota/releases/latest) the binaries can also be downloaded from http://thehackbox.org/tasmota/release/
 
-### Disclaimer
+#### Disclaimer
 :warning: **DANGER OF ELECTROCUTION** :warning:
 
-A Sonoff device is not a toy. It uses Mains AC so there is a danger of electrocution if not installed properly. If you don't know how to install it, please call an electrician. Remember: _**SAFETY FIRST**_. It is not worth to risk yourself, your family and your home if you don't know exactly what you are doing. Never try to flash a Sonoff device while it is connected to MAINS AC.
+A Sonoff device is not a toy. It uses Mains AC so there is a danger of electrocution if not installed properly. If you don't know how to install it, please call an electrician. Remember: _**SAFETY FIRST**_. It is not worth risk to yourself, your family, and your home if you don't know exactly what you are doing. Never try to flash a Sonoff device while it is connected to MAINS AC.
 
 We don't take any responsibility nor liability for using this software nor for the installation or any tips, advice, videos, etc. given by any member of this site or any related site.
 
 ### Note
-Please do not ask to add devices where you can't provide a basic working configuration (other than sonoff). Since there are thousands of them..
+Please do not ask to add new devices unless it requires additional code for new features. If the device is not listed as a module, try using [Templates](https://github.com/arendst/Sonoff-Tasmota/wiki/Templates) first. If it is not listed in the [Tasmota Device Templates Repository](http://blakadder.github.io/templates) create your own [Template](https://github.com/arendst/Sonoff-Tasmota/wiki/Templates#creating-your-template-).
 
 ### Quick Install
-Download one of the released binaries from https://github.com/arendst/Sonoff-Tasmota/releases and flash it to your hardware as documented in the wiki.
+Download one of the released binaries from https://github.com/arendst/Sonoff-Tasmota/releases and flash it to your hardware as [documented in the wiki](https://github.com/arendst/Sonoff-Tasmota/wiki/Flashing).
 
 ### Important User Compilation Information
 If you want to compile Sonoff-Tasmota yourself keep in mind the following:
 
 - Only Flash Mode **DOUT** is supported. Do not use Flash Mode DIO / QIO / QOUT as it might seem to brick your device. See [Wiki](https://github.com/arendst/Sonoff-Tasmota/wiki/Theo's-Tasmota-Tips) for background information.
-- Sonoff-Tasmota uses a 1M linker script WITHOUT spiffs **1M (no SPIFFS)** for optimal code space. If you compile using ESP/Arduino library 2.3.0 then download the provided new linker script to your Arduino IDE or Platformio base folder. Later version of ESP/Arduino library already contain the correct linker script. See [Wiki > Prerequisite](https://github.com/arendst/Sonoff-Tasmota/wiki/Prerequisite).
-- To make compile time changes to Sonoff-Tasmota it can use the ``user_config_override.h`` file. It assures keeping your settings when you download and compile a new version. To use ``user_config.override.h`` you will have to make a copy of the provided ``user_config.override_sample.h`` file and add your setting overrides. To enable the override file you will need to use a compile define as documented in the ``user_config_override_sample.h`` file.
+- Sonoff-Tasmota uses a 1M linker script WITHOUT spiffs **1M (no SPIFFS)** for optimal code space. If you compile using ESP/Arduino library 2.3.0 then download the provided new linker script to your Arduino IDE or Platformio base folder. Later version of ESP/Arduino library already contain the correct linker script. See [Wiki > Prerequisites](https://github.com/arendst/Sonoff-Tasmota/wiki/Prerequisites).
+- To make compile time changes to Sonoff-Tasmota it can use the ``user_config_override.h`` file. It assures keeping your settings when you download and compile a new version. To use ``user_config.override.h`` you will have to make a copy of the provided ``user_config_override_sample.h`` file and add your setting overrides. To enable the override file you will need to use a compile define as documented in the ``user_config_override_sample.h`` file.
 
 ### Version Information
 - Sonoff-Tasmota provides all (Sonoff) modules in one file and starts with module Sonoff Basic.
-- Once uploaded select module using the configuration webpage or the commands ```Modules``` and ```Module```.
+- Once uploaded, select [Module](https://github.com/arendst/Sonoff-Tasmota/wiki/Modules) using the configuration webpage, the commands ```Modules``` and ```Module``` or configure the [Template](https://github.com/arendst/Sonoff-Tasmota/wiki/Templates) for your device
 - After reboot select config menu again or use commands ```GPIOs``` and ```GPIO``` to change GPIO with desired sensor.
 
 ### Migration Information
@@ -53,51 +53,11 @@ See [wiki migration path](https://github.com/arendst/Sonoff-Tasmota/wiki/Upgrade
 ### Support Information
 <img src="https://github.com/arendst/arendst.github.io/blob/master/media/sonoffbasic.jpg" width="250" align="right" />
 
-See [Wiki](https://github.com/arendst/Sonoff-Tasmota/wiki) for more information.<br />
+For a database of supported devices see [Tasmota Device Templates Repository](https://blakadder.github.io/templates)
+
+See [Wiki](https://github.com/arendst/Sonoff-Tasmota/wiki) for use instructions and how-to's.<br />
 See [Community](https://groups.google.com/d/forum/sonoffusers) for forum.<br />
-See [Chat](https://discord.gg/Ks2Kzd4) for more user experience.
-
-The following devices are supported:
-- [iTead Sonoff Basic (R2)](https://www.itead.cc/smart-home/sonoff-wifi-wireless-switch-1.html)
-- [iTead Sonoff RF](https://www.itead.cc/smart-home/sonoff-rf.html)
-- [iTead Sonoff SV](https://www.itead.cc/smart-home/sonoff-sv.html)<img src="https://github.com/arendst/arendst.github.io/blob/master/media/sonoff_th.jpg" width="250" align="right" />
-- [iTead Sonoff TH10/TH16 with temperature sensor](https://www.itead.cc/smart-home/sonoff-th.html)
-- [iTead Sonoff Dual (R2)](https://www.itead.cc/smart-home/sonoff-dual.html)
-- [iTead Sonoff Pow with Energy Monitoring](https://www.itead.cc/smart-home/sonoff-pow.html)
-- [iTead Sonoff Pow R2 with Energy Monitoring](https://www.itead.cc/sonoff-pow-r2.html)
-- [iTead Sonoff 4CH (R2)](https://www.itead.cc/smart-home/sonoff-4ch.html)
-- [iTead Sonoff 4CH Pro (R2)](https://www.itead.cc/smart-home/sonoff-4ch-pro.html)
-- [iTead Sonoff S20 Smart Socket](https://www.itead.cc/smart-socket.html)
-- [Sonoff S22 Smart Socket](https://github.com/arendst/Sonoff-Tasmota/issues/627)
-- [iTead Sonoff S26 Smart Socket](https://www.itead.cc/sonoff-s26-wifi-smart-plug.html)
-- [iTead Sonoff S31 Smart Socket with Energy Monitoring](https://www.itead.cc/sonoff-s31.html)
-- [iTead Slampher](https://www.itead.cc/slampher.html)
-- [iTead Sonoff Touch](https://www.itead.cc/sonoff-touch.html)
-- [iTead Sonoff T1](https://www.itead.cc/sonoff-t1.html)
-- [iTead Sonoff SC](https://www.itead.cc/sonoff-sc.html)
-- [iTead Sonoff Led](https://www.itead.cc/sonoff-led.html)<img src="https://github.com/arendst/arendst.github.io/blob/master/media/sonoff4chpror2.jpg" height="250" align="right" />
-- [iTead Sonoff BN-SZ01 Ceiling Led](https://www.itead.cc/bn-sz01.html)
-- [iTead Sonoff B1](https://www.itead.cc/sonoff-b1.html)
-- [iTead Sonoff iFan02](https://www.itead.cc/sonoff-ifan02-wifi-smart-ceiling-fan-with-light.html)
-- [iTead Sonoff RF Bridge 433](https://www.itead.cc/sonoff-rf-bridge-433.html)
-- [iTead Sonoff Dev](https://www.itead.cc/sonoff-dev.html)
-- [iTead 1 Channel Switch 5V / 12V](https://www.itead.cc/smart-home/inching-self-locking-wifi-wireless-switch.html)
-- [iTead Motor Clockwise/Anticlockwise](https://www.itead.cc/smart-home/motor-reversing-wifi-wireless-switch.html)
-- [Electrodragon IoT Relay Board](http://www.electrodragon.com/product/wifi-iot-relay-board-based-esp8266/)
-- AI Light or any my9291 compatible RGBW LED bulb
-- H801 PWM LED controller
-- [MagicHome PWM LED controller](https://github.com/arendst/Sonoff-Tasmota/wiki/MagicHome-LED-strip-controller)
-- AriLux AL-LC01, AL-LC06 and AL-LC11 PWM LED controller
-- [Supla device - Espablo-inCan mod. for electrical Installation box](https://forum.supla.org/viewtopic.php?f=33&t=2188)
-- [BlitzWolf BW-SHP2 Smart Socket with Energy Monitoring](https://www.banggood.com/BlitzWolf-BW-SHP2-Smart-WIFI-Socket-EU-Plug-220V-16A-Work-with-Amazon-Alexa-Google-Assistant-p-1292899.html)<img src="https://github.com/arendst/arendst.github.io/blob/master/media/shelly2_small_250a.png" width="250" align="right" />
-- [Luani HVIO board](https://luani.de/projekte/esp8266-hvio/)
-- [Wemos D1 mini](https://wiki.wemos.cc/products:d1:d1_mini)
-- [HuaFan Smart Socket](https://github.com/arendst/Sonoff-Tasmota/wiki/HuaFan-Smart-Socket)
-- [Hyleton-313 Smart Plug](https://github.com/arendst/Sonoff-Tasmota/wiki/Hyleton-313-Smart-Plug)
-- [Allterco Shelly 1](https://shelly.cloud/shelly1-open-source/)
-- [Allterco Shelly 2 with Energy Monitoring](https://shelly.cloud/shelly2/)
-- NodeMcu and Ledunia
-- [KS-602 based switches like GresaTek, Jesiya, NewRice, Lyasi etc](https://ucexperiment.wordpress.com/2017/11/14/reprogramming-a-lyasi-wifi-wall-switch-with-esp8285/)
+Visit [Discord Chat](https://discord.gg/Ks2Kzd4) for discussions and troubleshooting.
 
 ### Contribute
 You can contribute to Sonoff-Tasmota by
@@ -153,7 +113,7 @@ People helping to keep the show on the road:
 - Emontnemery for his HomeAssistant Discovery concept and many code tuning tips
 - Aidan Mountford for his HSB support
 - Daniel Ztolnai for his Serial Bridge implementation
-- Gerhard Mutz for his SGP30, Sunrise/Sunset and display support drivers
+- Gerhard Mutz for multiple sensor & display drivers, Sunrise/Sunset, and scripting
 - Nuno Ferreira for his HC-SR04 driver
 - Adrian Scillato for his (security)fixes and implementing and maintaining KNX
 - Gennaro Tortone for implementing and maintaining Eastron drivers
@@ -163,6 +123,8 @@ People helping to keep the show on the road:
 - Joel Stein and digiblur for their Tuya research and driver
 - Frogmore42 and Jason2866 for providing many issue answers
 - Blakadder for editing the wiki and providing template management
+- Stephan Hadinger for refactoring light driver and enhancing HueEmulation
+- tmo for designing the official logo
 - Many more providing Tips, Wips, Pocs or PRs
 
 ### License

REFERENCE.md

@@ -1,4 +1,7 @@
-## Tasmota Reference
+<img src="/tools/logo/TASMOTA_FullLogo_Vector.svg" alt="Logo" align="right" height="76"/>
+
+# Reference
+
 Tasmota backgound information.
 
 ## Supported Smart Switch with Energy Monitoring GPIO usage