-
Notifications
You must be signed in to change notification settings - Fork 33
Home
Welcome to the ithowifi wiki!
To buy visit this page https://www.nrgwatch.nl/ (Dutch) or https://www.tindie.com (English).
This Wiki covers the installation and configuration of the add-on for both the CVE and non-CVE units, integration with home automation software and more.
Please note that the HW design van Itho Daalderop HVAC (also known as Mechanical Ventilation ) system can only be controled via the "medium" or "standard" setting.
If you have a supported unit and the right add-on, this allows you to control the Itho devices via the add-on webpage, HTTP API or MQTT.
Note: the add-on hardware and software is the result of reverse engineering and endless hours of testing and debugging. It is not endorsed or supported by Itho Daalderop.
The add-on hardware and installation steps differs per unit type.
-
Addon for CVE
This applies to the Itho Daalderop CVE-S and related units. -
Addon for non-CVE
This applies to DemandFlow, QualityFlow and HRU-350 and supported WTW units.
Once the CVE or non-CVE add-on is installed, automation is a logical next step. Integration with home automation like Home Assistant, Node-Red and Domoticz is covered here.
In Debug left menu (if you can reach the webserver) you can find relevant info relevant for troubleshooting.
Current firmware version: 2.1
Hardware revision: 2
4319 N: System boot, last reset reason: 1
4392 N: WiFi: connection successful
2021-02-11 14:05:18 N: WiFi info:
2021-02-11 14:05:18 N: Mode:STA
2021-02-11 14:05:18 N: Status:3
2021-02-11 14:05:18 N: IP:10.xx.xx.xx
2021-02-11 14:05:18 N: MQTT: connected, System config: on
2021-02-11 14:05:18 N: Webserver: started
2021-02-11 14:05:18 N: mDNS: started
2021-02-11 14:05:18 N: Hostname: nrg-itho-218c
2021-02-11 14:05:18 N: Setup: done
Report issues with the following info (copy and paste to https://github.com/arjenhiemstra/ithowifi/issues) , please use multiple if you have a software(SW)/hardware(HW) issue
Subject "[hw/sw] short description"
Issue description (short) :
Current Firmware version:
Current Hardware revision: (backside addon)
Type number Itho [on sticker outside the box]:
IP [static or dhcp]:
MQTT enabled [yes/no]:
HTTP API enabled [yes/no]:
CC1101 RF module enabled [yes/no]:
Restart via webserver resolved it (temporary) [yes/no]:
Power cycle Itho resolved this issue [yes/no]:
Please understand that Wifi issues are not for us/me if you have connection issues please contact a IT shop to resolve this at your home.