Cm 11.0 new cm #3
Closed
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
This enables thermal monitoring capability in the kernel in the absence of a system wide thermal monitoring entity. Monitors TSENS temperature and limits the max frequency of the cores. The code is simple, uses 3 throttling steps, and is completely configurable via sysfs. All thermal zones must be configured before enabling thermal mitigation. Example for configuring one of the 3 thermal zones (high, mid, low): echo "1728000 52 48" > /sys/kernel/msm_thermal/low_thresh Where 1728000 is the frequency to throttle to in KHz, 52 is the throttle temperature in degrees C, and 48 is the unthrottle temperature in degrees C. None of the temperatures set for a zone are allowed to overlap the the temperatures set for another zone. Once all zones all configured, do this to enable thermal mitigation: echo "1" > /sys/kernel/msm_thermal/enabled [tarun93] : Rework on usermin > usermax policy Signed-off-by: Sultanxda <sultanxda@gmail.com> Signed-off-by: tarun93 <tarunmyid@gmail.com>
…f2fs.git/log/?h=linux-3.4 Up to date as of cfd8e10865e66202237817e362c6ad6b475ce7c1 f2fs: support 3.4 Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch introduces a generic ioctl for fs shutdown. Change-Id: I452ee16b0078a2704b8026962e5bd07b67710c06
simple_ondemands private data must be set to NULL, otherwise we would run into a NULL pointer in kgsl_devfreq_get_dev_status(). Change-Id: Id494f1b65cb674fee56dae958bc1da267ed15501
* enable f2fs Change-Id: I6c9f802aa4a84bda04e6eddbe013c758fd735a81
|
nope |
ghost
closed this
TechExhibeo
pushed a commit
to TechExhibeo/android_kernel_xiaomi_armani
that referenced
this pull request
Jun 16, 2016
We can end up allocating a new compression stream with GFP_KERNEL from
within the IO path, which may result is nested (recursive) IO operations.
That can introduce problems if the IO path in question is a reclaimer,
holding some locks that will deadlock nested IOs.
Allocate streams and working memory using GFP_NOIO flag, forbidding
recursive IO and FS operations.
An example:
[ 747.233722] inconsistent {IN-RECLAIM_FS-W} -> {RECLAIM_FS-ON-W} usage.
[ 747.233724] git/20158 [HC0[0]:SC0[0]:HE1:SE1] takes:
[ 747.233725] (jbd2_handle){+.+.?.}, at: [<ffffffff811e31db>] start_this_handle+0x4ca/0x555
[ 747.233733] {IN-RECLAIM_FS-W} state was registered at:
[ 747.233735] [<ffffffff8107b8e9>] __lock_acquire+0x8da/0x117b
[ 747.233738] [<ffffffff8107c950>] lock_acquire+0x10c/0x1a7
[ 747.233740] [<ffffffff811e323e>] start_this_handle+0x52d/0x555
[ 747.233742] [<ffffffff811e331a>] jbd2__journal_start+0xb4/0x237
[ 747.233744] [<ffffffff811cc6c7>] __ext4_journal_start_sb+0x108/0x17e
[ 747.233748] [<ffffffff811a90bf>] ext4_dirty_inode+0x32/0x61
[ 747.233750] [<ffffffff8115f37e>] __mark_inode_dirty+0x16b/0x60c
[ 747.233754] [<ffffffff81150ad6>] iput+0x11e/0x274
[ 747.233757] [<ffffffff8114bfbd>] __dentry_kill+0x148/0x1b8
[ 747.233759] [<ffffffff8114c9d9>] shrink_dentry_list+0x274/0x44a
[ 747.233761] [<ffffffff8114d38a>] prune_dcache_sb+0x4a/0x55
[ 747.233763] [<ffffffff8113b1ad>] super_cache_scan+0xfc/0x176
[ 747.233767] [<ffffffff810fa089>] shrink_slab.part.14.constprop.25+0x2a2/0x4d3
[ 747.233770] [<ffffffff810fcccb>] shrink_zone+0x74/0x140
[ 747.233772] [<ffffffff810fd924>] kswapd+0x6b7/0x930
[ 747.233774] [<ffffffff81058887>] kthread+0x107/0x10f
[ 747.233778] [<ffffffff814fadff>] ret_from_fork+0x3f/0x70
[ 747.233783] irq event stamp: 138297
[ 747.233784] hardirqs last enabled at (138297): [<ffffffff8107aff3>] debug_check_no_locks_freed+0x113/0x12f
[ 747.233786] hardirqs last disabled at (138296): [<ffffffff8107af13>] debug_check_no_locks_freed+0x33/0x12f
[ 747.233788] softirqs last enabled at (137818): [<ffffffff81040f89>] __do_softirq+0x2d3/0x3e9
[ 747.233792] softirqs last disabled at (137813): [<ffffffff81041292>] irq_exit+0x41/0x95
[ 747.233794]
other info that might help us debug this:
[ 747.233796] Possible unsafe locking scenario:
[ 747.233797] CPU0
[ 747.233798] ----
[ 747.233799] lock(jbd2_handle);
[ 747.233801] <Interrupt>
[ 747.233801] lock(jbd2_handle);
[ 747.233803]
*** DEADLOCK ***
[ 747.233805] 5 locks held by git/20158:
[ 747.233806] #0: (sb_writers#7){.+.+.+}, at: [<ffffffff81155411>] mnt_want_write+0x24/0x4b
[ 747.233811] #1: (&type->i_mutex_dir_key#2/1){+.+.+.}, at: [<ffffffff81145087>] lock_rename+0xd9/0xe3
[ 747.233817] #2: (&sb->s_type->i_mutex_key#11){+.+.+.}, at: [<ffffffff8114f8e2>] lock_two_nondirectories+0x3f/0x6b
[ 747.233822] armani-dev#3: (&sb->s_type->i_mutex_key#11/4){+.+.+.}, at: [<ffffffff8114f909>] lock_two_nondirectories+0x66/0x6b
[ 747.233827] armani-dev#4: (jbd2_handle){+.+.?.}, at: [<ffffffff811e31db>] start_this_handle+0x4ca/0x555
[ 747.233831]
stack backtrace:
[ 747.233834] CPU: 2 PID: 20158 Comm: git Not tainted 4.1.0-rc7-next-20150615-dbg-00016-g8bdf555-dirty #211
[ 747.233837] ffff8800a56cea40 ffff88010d0a75f8 ffffffff814f446d ffffffff81077036
[ 747.233840] ffffffff823a84b0 ffff88010d0a7638 ffffffff814f3849 0000000000000001
[ 747.233843] 000000000000000a ffff8800a56cf6f8 ffff8800a56cea40 ffffffff810795dd
[ 747.233846] Call Trace:
[ 747.233849] [<ffffffff814f446d>] dump_stack+0x4c/0x6e
[ 747.233852] [<ffffffff81077036>] ? up+0x39/0x3e
[ 747.233854] [<ffffffff814f3849>] print_usage_bug.part.23+0x25b/0x26a
[ 747.233857] [<ffffffff810795dd>] ? print_shortest_lock_dependencies+0x182/0x182
[ 747.233859] [<ffffffff8107a9c9>] mark_lock+0x384/0x56d
[ 747.233862] [<ffffffff8107ac11>] mark_held_locks+0x5f/0x76
[ 747.233865] [<ffffffffa023d2f3>] ? zcomp_strm_alloc+0x25/0x73 [zram]
[ 747.233867] [<ffffffff8107d13b>] lockdep_trace_alloc+0xb2/0xb5
[ 747.233870] [<ffffffff8112bac7>] kmem_cache_alloc_trace+0x32/0x1e2
[ 747.233873] [<ffffffffa023d2f3>] zcomp_strm_alloc+0x25/0x73 [zram]
[ 747.233876] [<ffffffffa023d428>] zcomp_strm_multi_find+0xe7/0x173 [zram]
[ 747.233879] [<ffffffffa023d58b>] zcomp_strm_find+0xc/0xe [zram]
[ 747.233881] [<ffffffffa023f292>] zram_bvec_rw+0x2ca/0x7e0 [zram]
[ 747.233885] [<ffffffffa023fa8c>] zram_make_request+0x1fa/0x301 [zram]
[ 747.233889] [<ffffffff812142f8>] generic_make_request+0x9c/0xdb
[ 747.233891] [<ffffffff8121442e>] submit_bio+0xf7/0x120
[ 747.233895] [<ffffffff810f1c0c>] ? __test_set_page_writeback+0x1a0/0x1b8
[ 747.233897] [<ffffffff811a9d00>] ext4_io_submit+0x2e/0x43
[ 747.233899] [<ffffffff811a9efa>] ext4_bio_write_page+0x1b7/0x300
[ 747.233902] [<ffffffff811a2106>] mpage_submit_page+0x60/0x77
[ 747.233905] [<ffffffff811a25b0>] mpage_map_and_submit_buffers+0x10f/0x21d
[ 747.233907] [<ffffffff811a6814>] ext4_writepages+0xc8c/0xe1b
[ 747.233910] [<ffffffff810f3f77>] do_writepages+0x23/0x2c
[ 747.233913] [<ffffffff810ea5d1>] __filemap_fdatawrite_range+0x84/0x8b
[ 747.233915] [<ffffffff810ea657>] filemap_flush+0x1c/0x1e
[ 747.233917] [<ffffffff811a3851>] ext4_alloc_da_blocks+0xb8/0x117
[ 747.233919] [<ffffffff811af52a>] ext4_rename+0x132/0x6dc
[ 747.233921] [<ffffffff8107ac11>] ? mark_held_locks+0x5f/0x76
[ 747.233924] [<ffffffff811afafd>] ext4_rename2+0x29/0x2b
[ 747.233926] [<ffffffff811427ea>] vfs_rename+0x540/0x636
[ 747.233928] [<ffffffff81146a01>] SyS_renameat2+0x359/0x44d
[ 747.233931] [<ffffffff81146b26>] SyS_rename+0x1e/0x20
[ 747.233933] [<ffffffff814faa17>] entry_SYSCALL_64_fastpath+0x12/0x6f
[minchan@kernel.org: add stable mark]
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Kyeongdon Kim <kyeongdon.kim@lge.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: khanfrd <khanfrd94@gmail.com>
This pull request was closed.
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
No description provided.