Run shellfmt to complete code

config/sources/families/imx8m.conf

@@ -30,8 +30,7 @@ case $BOARD in
 esac
 
 # bootloader releated
-pre_config_uboot_target()
-{
+pre_config_uboot_target() {
 	# get the firmware
 	rm -rf ${IMX_FIRMWARE}*
 	wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/${IMX_FIRMWARE}.bin -O ${IMX_FIRMWARE}.bin
@@ -46,8 +45,7 @@ pre_config_uboot_target()
 	export ATF_LOAD_ADDR=${ATF_ADDR}
 }
 
-write_uboot_platform()
-{
+write_uboot_platform() {
 	echo ${OFFSET}
 	dd if=$1/flash.bin of=$2 bs=1K seek=${OFFSET} status=noxfer conv=fsync > /dev/null 2>&1
 }

config/sources/families/include/imx8_common.inc

@@ -25,13 +25,13 @@ case $BOARD in
 		LINUXCONFIG='linux-tqma-'$BRANCH # one config for "tq arm modules"
 		case $BRANCH in
 
-		current) # active lts mainline kernel
+			current) # active lts mainline kernel
 				KERNEL_MAJOR_MINOR="6.6"
 				KERNELBRANCH='branch:linux-6.6.y'
 				KERNELPATCHDIR="archive/imx8m-6.6"
 				;;
 
-		edge|default) # use for tests with recent mainline kernels
+			edge | default) # use for tests with recent mainline kernels
 				;;
 
 		esac

config/sources/families/include/meson_common.inc

@@ -42,9 +42,9 @@ esac
 
 case $BRANCH in
 
-        legacy)
-                declare -g KERNEL_MAJOR_MINOR="6.1"
-                ;;
+	legacy)
+		declare -g KERNEL_MAJOR_MINOR="6.1"
+		;;
 
 	current)
 		declare -g KERNEL_MAJOR_MINOR="6.6"

config/sources/families/jethub.conf

@@ -35,11 +35,10 @@ elif [[ "$BOARD" == "jethubj200" ]]; then
 	BOOTPATCHDIR="v2024.01"
 fi
 
-
 ########
 # @TODO: Put this in the board configs of the respective boards
 ########
-if [[ "$BOARD" == "jethubj80" ]] || [[ "$BOARD" == "jethubj100" ]] ; then
+if [[ "$BOARD" == "jethubj80" ]] || [[ "$BOARD" == "jethubj100" ]]; then
 	function family_tweaks__blacklistrtw88() {
 		if [[ "$BOARD" == jethubj80 ]] || [[ "$BOARD" == jethubj100 ]]; then
 			mkdir -p "${destination}"/etc/modprobe.d
@@ -49,19 +48,16 @@ if [[ "$BOARD" == "jethubj80" ]] || [[ "$BOARD" == "jethubj100" ]] ; then
 	}
 fi
 
-
 # JetHub builds userspace tooling with c++ (gpp) toolchain in buildjethomecmds() below.
 # The C++ compiler is no longer included by default in the Armbian build system.
 # Enable the extension that brings includes it. It could've been an inline extension (eg: the function right here),
 # but having a core extension allows it to be pre-included in the Dockerfile generation and thus in the Docker images.
 enable_extension "c-plus-plus-compiler"
 
-
 function fetch_sources_tools__jethub_amlogic_fip() {
-       fetch_from_repo "https://github.com/adeepn/amlogic-boot-fip" "amlogic-boot-fip-jethub" "branch:add_jethub_j200"
+	fetch_from_repo "https://github.com/adeepn/amlogic-boot-fip" "amlogic-boot-fip-jethub" "branch:add_jethub_j200"
 }
 
-
 uboot_custom_postprocess() {
 	if [[ "$BOARD" == "jethubj80" ]]; then
 		uboot_gxl_postprocess_ng "$SRC/cache/sources/amlogic-boot-fip/jethub-j80"

config/sources/families/meson-s4t7.conf

@@ -15,9 +15,9 @@ enable_extension "bluetooth-hciattach"                                       # E
 case $BRANCH in
 
 	legacy)
-		declare -g KERNEL_MAJOR_MINOR="5.15"                           # Major and minor versions of this kernel. For mainline caching.
+		declare -g KERNEL_MAJOR_MINOR="5.15"                        # Major and minor versions of this kernel. For mainline caching.
 		declare -g KERNELSOURCE="${GITHUB_SOURCE}/khadas/linux.git" # Khadas kernel
-		declare -g KERNELBRANCH="branch:khadas-vims-5.15.y"            # Branch or tag to build from. It should match MAJOR_MINOR
+		declare -g KERNELBRANCH="branch:khadas-vims-5.15.y"         # Branch or tag to build from. It should match MAJOR_MINOR
 		declare -g KERNELPATCHDIR="archive/meson-s4t7-5.15"
 		declare -g COMMON_DRIVERS_SOURCE="${GITHUB_SOURCE}/khadas/common_drivers"
 		declare -g EXTRAWIFI=no
@@ -128,7 +128,7 @@ function custom_kernel_config__add_khadas_common_drivers() {
 		memoize_cache_ttl=$common_drivers_cache_ttl_seconds run_memoized GIT_INFO_COMMON_DRIVERS "git2info" memoized_git_ref_to_info
 
 		# Hack to ensure that we will recreate kernel if common_drivers source changes
-		kernel_config_modifying_hashes+=( "khadas_common_drivers=${GIT_INFO_COMMON_DRIVERS[SHA1]}" )
+		kernel_config_modifying_hashes+=("khadas_common_drivers=${GIT_INFO_COMMON_DRIVERS[SHA1]}")
 
 		# viraniac: kernel_config_modifying_hashes is only needed during first call of this function to calculate kernel artifact version string. It serves no purpose whatsoever during second call.
 		kernel_config_modifying_hashes+=("CONFIG_DEBUG_KERNEL=y" "CONFIG_EXPERT=y" "CONFIG_EMBEDDED=y")
@@ -152,7 +152,7 @@ function kernel_copy_extra_sources__khadas_common_drivers() {
 			rm -rf "${common_drivers_git_bare_tree}"
 		fi
 
-		run_host_command_logged git clone  --tags --no-checkout \
+		run_host_command_logged git clone --tags --no-checkout \
 			"${COMMON_DRIVERS_SOURCE}" "${common_drivers_git_bare_tree}"
 
 		touch "${common_drivers_git_bare_tree_done_marker}"
@@ -196,8 +196,8 @@ function post_family_tweaks_bsp__disable_uinitrd_generation() {
 }
 
 function image_specific_armbian_env_ready__enable_earlycon() {
-    display_alert "Enabling earlycon"
-    run_host_command_logged echo "earlycon=on" >>${SDCARD}/boot/armbianEnv.txt
+	display_alert "Enabling earlycon"
+	run_host_command_logged echo "earlycon=on" >> ${SDCARD}/boot/armbianEnv.txt
 }
 
 function post_family_tweaks_bsp__add_fan_service() {

config/sources/families/mt7623.conf

@@ -33,7 +33,6 @@ GOVERNOR="ondemand"
 function pre_install_kernel_debs__network_manager_ignore_devices() {
 	display_alert "Board: ${BOARD}: Disabling Network-Manager for all devices" "interface-name:eth*,interface-name:wan*,interface-name:lan*,interface-name:br*" "info"
 
-
 	mkdir -p "${SDCARD}"/etc/NetworkManager/conf.d/
 	cat <<- EOF > "${SDCARD}"/etc/NetworkManager/conf.d/99-ignore-interfaces.conf
 		[keyfile]

config/sources/families/mvebu64.conf

@@ -75,7 +75,6 @@ GOVERNOR=ondemand
 function pre_install_kernel_debs__network_manager_ignore_devices() {
 	display_alert "Board: ${BOARD}: Disabling Network-Manager for all devices" "interface-name:eth*,interface-name:wan*,interface-name:lan*,interface-name:br*" "info"
 
-
 	mkdir -p "${SDCARD}"/etc/NetworkManager/conf.d/
 	cat <<- EOF > "${SDCARD}"/etc/NetworkManager/conf.d/99-ignore-interfaces.conf
 		[keyfile]

config/sources/families/phytium-embedded.conf

@@ -22,7 +22,7 @@ case "${BRANCH}" in
 		EXTRAWIFI="no"
 
 		;;
-		
+
 	current)
 		KERNELSOURCE='https://github.com/chainsx/phytium-linux-kernel'
 		KERNELBRANCH="branch:linux-6.6"
@@ -38,11 +38,11 @@ esac
 write_uboot_platform() {
 	declare ptuboot_cache_dir="${SRC}/cache/phytiumpi-uboot"
 	mkdir -p "${ptuboot_cache_dir}"
-	
-	sfdisk --dump "$2" > "${ptuboot_cache_dir}/part.txt"                              # Backup partition table, command sfdisk is belong to util-linux
-	dd if="${SRC}/packages/blobs/phytiumpi/fip-all-sd-boot.bin" of="$2" conv=notrunc      # Write non-free u-boot file
-	sfdisk --no-reread "$2" < "${ptuboot_cache_dir}/part.txt"                         # Recover partition table
-	
+
+	sfdisk --dump "$2" > "${ptuboot_cache_dir}/part.txt"                             # Backup partition table, command sfdisk is belong to util-linux
+	dd if="${SRC}/packages/blobs/phytiumpi/fip-all-sd-boot.bin" of="$2" conv=notrunc # Write non-free u-boot file
+	sfdisk --no-reread "$2" < "${ptuboot_cache_dir}/part.txt"                        # Recover partition table
+
 	# Update u-boot env
 	mkenvimage -s 0x1000 -o "${ptuboot_cache_dir}/env.bin" "${SRC}/packages/blobs/phytiumpi/env.txt"
 	dd if="${ptuboot_cache_dir}/env.bin" of="$2" bs=1k seek=1472 conv=notrunc

config/sources/families/rock-s0.conf

@@ -32,8 +32,8 @@ IDBLOADER_BLOB=$SRC/packages/blobs/rockchip/rk3308_idbloader_ddr589MHz_uart0_m0_
 
 case $BRANCH in
 	legacy)
-                echo "Legacy not supported for rock-s0 board"
-                exit 99
+		echo "Legacy not supported for rock-s0 board"
+		exit 99
 		;;
 esac
 

config/sources/families/rockchip-rk3588.conf

@@ -42,24 +42,24 @@ case $BRANCH in
 	current)
 		# Branch based on a stable kernel release (will stay on the next LTS kernel release once released, 6.12? LTS)
 		LINUXFAMILY=rockchip-rk3588
-		KERNEL_MAJOR_MINOR="6.8"                                    # Major and minor versions of this kernel.
-		LINUXCONFIG="linux-rockchip-rk3588-${KERNEL_MAJOR_MINOR}"   # Attention: not -${BRANCH} (edge/current/legacy), but -${KERNEL_MAJOR_MINOR} thus 6.6 / 6.12 etc
+		KERNEL_MAJOR_MINOR="6.8"                                  # Major and minor versions of this kernel.
+		LINUXCONFIG="linux-rockchip-rk3588-${KERNEL_MAJOR_MINOR}" # Attention: not -${BRANCH} (edge/current/legacy), but -${KERNEL_MAJOR_MINOR} thus 6.6 / 6.12 etc
 		# No need to set KERNELPATCHDIR, since default is: KERNELPATCHDIR='archive/rockchip-rk3588-${KERNEL_MAJOR_MINOR}'
 		;;
 
 	edge)
 		# Branch based on the latest kernel release including RC releases, to benefit from the latest RK3588 mainline advancements. Might be unstable!
 		LINUXFAMILY=rockchip-rk3588
-		KERNEL_MAJOR_MINOR="6.10"                                   # Major and minor versions of this kernel.
-		LINUXCONFIG="linux-rockchip-rk3588-${KERNEL_MAJOR_MINOR}"   # Attention: not -${BRANCH} (edge/current/legacy), but -${KERNEL_MAJOR_MINOR} thus 6.8 / 6.10 etc
+		KERNEL_MAJOR_MINOR="6.10"                                 # Major and minor versions of this kernel.
+		LINUXCONFIG="linux-rockchip-rk3588-${KERNEL_MAJOR_MINOR}" # Attention: not -${BRANCH} (edge/current/legacy), but -${KERNEL_MAJOR_MINOR} thus 6.8 / 6.10 etc
 		# No need to set KERNELPATCHDIR, since default is: KERNELPATCHDIR='archive/rockchip-rk3588-${KERNEL_MAJOR_MINOR}'
 		;;
 
 	collabora)
 		# Collabora's rk3588, where the action is these days
 		LINUXFAMILY=rockchip-rk3588
 		LINUXCONFIG='linux-rockchip-rk3588-'$BRANCH
-		KERNEL_MAJOR_MINOR="6.9"				# Major and minor versions of this kernel.
+		KERNEL_MAJOR_MINOR="6.9"                                                                # Major and minor versions of this kernel.
 		KERNELPATCHDIR='rockchip-rk3588-collabora'                                              # Try to keep this as empty as possible. We won't work on top of Collabora's branch, they rebase all the time. New DTs are ok.
 		KERNELSOURCE='https://gitlab.collabora.com/hardware-enablement/rockchip-3588/linux.git' # Directly from Collabora...
 		KERNELBRANCH='branch:rk3588-v6.9'                                                       # Rolling kernel branch, will be rebased

config/sources/families/sm8250.conf

@@ -15,13 +15,13 @@ enable_extension "image-output-abl"
 case $BRANCH in
 
 	current)
-		declare -g KERNEL_MAJOR_MINOR="6.9"   # Major and minor versions of this kernel.
+		declare -g KERNEL_MAJOR_MINOR="6.9" # Major and minor versions of this kernel.
 		declare -g KERNELBRANCH='branch:linux-6.9.y'
 		declare -g -i KERNEL_GIT_CACHE_TTL=120 # 2 minutes; this is a high-traffic repo
 		;;
 
 	edge)
-		declare -g KERNEL_MAJOR_MINOR="6.10"   # Major and minor versions of this kernel.
+		declare -g KERNEL_MAJOR_MINOR="6.10" # Major and minor versions of this kernel.
 		;;
 
 esac

config/sources/families/sun50iw6.conf

@@ -15,13 +15,13 @@ OVERLAY_PREFIX='sun50i-h6'
 GOVERNOR=ondemand
 ASOUND_STATE='asound.state.sun50iw2-dev'
 
-function post_family_config__install_lightdm_gtk_greeter(){
+function post_family_config__install_lightdm_gtk_greeter() {
 	if [[ ${BUILD_DESKTOP} == "yes" ]] && [[ ! ${DESKTOP_ENVIRONMENT} =~ ^(kde|gnome)$ ]]; then
 		add_packages_to_image lightdm-gtk-greeter
 	fi
 }
 
-function post_family_tweaks__switch_to_lightdm_gtk_greeter(){
+function post_family_tweaks__switch_to_lightdm_gtk_greeter() {
 	# Mali T720 seems to have some issues with slick-greeter.
 	# Use gtk greeter instead
 	if [[ ${BUILD_DESKTOP} == "yes" ]] && [[ ! ${DESKTOP_ENVIRONMENT} =~ ^(kde|gnome)$ ]]; then

config/sources/families/sun8i.conf

@@ -15,4 +15,3 @@ fi
 
 [[ -z $CPUMIN ]] && CPUMIN=480000
 [[ -z $CPUMAX ]] && CPUMAX=1400000
-

extensions/allwinner-kernel-bump.sh

@@ -37,7 +37,7 @@ function extension_finish_config__prepare_megous_patches() {
 
 		if [[ -d ${patch_dir_base} ]]; then
 			display_alert "allwinner-kernel-bump" "Found existing kernel patch directory" "info"
-			if [[ "${OVERWRITE_PATCHDIR:-no}" == "yes"  ]]; then
+			if [[ "${OVERWRITE_PATCHDIR:-no}" == "yes" ]]; then
 				display_alert "allwinner-kernel-bump" "Removing as requested. Any manual changes will get overwritten" "info"
 				rm -rf ${patch_dir_base}
 			else
@@ -69,9 +69,9 @@ function extension_finish_config__prepare_megous_patches() {
 		run_host_command_logged rm -f ${patch_dir_base}/series.{conf,megous}
 
 		display_alert "allwinner-kernel-bump" "Extracting latest Megous patches" "info"
-		megous_trees=( "a83t-suspend" "af8133j" "anx" "audio" "axp" "cam" "drm"
+		megous_trees=("a83t-suspend" "af8133j" "anx" "audio" "axp" "cam" "drm"
 			"err" "fixes" "mbus" "modem" "opi3" "pb" "pinetab" "pp" "ppkb" "samuel"
-			"speed" "tbs-a711" "ths" )
+			"speed" "tbs-a711" "ths")
 
 		run_host_command_logged mkdir -p ${patch_dir_megous} ${patch_dir_tmp}
 

extensions/armbian-live-patch.sh

@@ -1,6 +1,6 @@
 function post_family_tweaks_bsp__armbian-live-patch() {
 
-display_alert "Installing Armbian Live Patch" "${EXTENSION}" "info"
+	display_alert "Installing Armbian Live Patch" "${EXTENSION}" "info"
 
 	run_host_command_logged cat <<- 'armbian-live-patch' > "${destination}"/etc/systemd/system/armbian-live-patch.service
 		# Armbian simple patch system service

extensions/cloud-init/cloud-init.sh

@@ -10,23 +10,23 @@
 # Implementaiton is based on the NoCLoud data source that will use
 # the FAT partition with armbi_boot label to source the configuration from
 
-# The Cloud init files in the boot partition are meant to be replaced with user provided ones, they are empty 
+# The Cloud init files in the boot partition are meant to be replaced with user provided ones, they are empty
 # of configurations except for setting hostname and DHCP on ethernet adapters.
 
 # This extension also disables armbian-first-run
 
 # Cloud-Init image marker
 function extension_prepare_config__ci_image_suffix() {
-	# Add to image suffix. 
-	EXTRA_IMAGE_SUFFIXES+=("-ci") 
+	# Add to image suffix.
+	EXTRA_IMAGE_SUFFIXES+=("-ci")
 }
 
-function extension_prepare_config__prepare_ci() { 
+function extension_prepare_config__prepare_ci() {
 	# Cloud Init related packages selected from Ubuntu RPI distirbution
 	add_packages_to_image cloud-init cloud-initramfs-dyn-netconf
 }
 
-function extension_prepare_config__ci_compatibility_check(){
+function extension_prepare_config__ci_compatibility_check() {
 	# We require fat boot partition, will change and if the user provided another type, will fail.
 	if [[ -z "${BOOTFS_TYPE}" ]]; then
 		declare -g BOOTFS_TYPE="fat"
@@ -53,7 +53,6 @@ function pre_customize_image__inject_cloud_init_config() {
 	return 0
 }
 
-
 # @TODO: would be better to have "armbian first run" as an extension that can be disabled
 function pre_customize_image__disable_armbian_first_run() {
 	display_alert "Disabling" "armbian first run" "info"

extensions/fs-cryptroot-support.sh

@@ -15,13 +15,13 @@ function add_host_dependencies__add_cryptroot_tooling() {
 	fi
 }
 
-function extension_prepare_config__prepare_cryptroot() { 
+function extension_prepare_config__prepare_cryptroot() {
 	# Config for cryptroot, a boot partition is required.
 	declare -g BOOTPART_REQUIRED=yes
 	EXTRA_IMAGE_SUFFIXES+=("-crypt")
 }
 
-function prepare_root_device__encrypt_root_device(){
+function prepare_root_device__encrypt_root_device() {
 	# We encrypt the rootdevice (currently a loop device) and return the new mapped rootdevice
 	check_loop_device "$rootdevice"
 	display_alert "Encrypting root partition with LUKS..." "cryptsetup luksFormat $rootdevice" ""

extensions/lvm.sh

@@ -5,34 +5,33 @@
 #
 
 # This extension will place the root partition on an LVM volume.
-# It is possible to customise the volume group name and the image is extended to allow 
+# It is possible to customise the volume group name and the image is extended to allow
 # for LVM headers
 
-# In case of failed builds check for leaked logical volumes with "dmsetup list" and 
+# In case of failed builds check for leaked logical volumes with "dmsetup list" and
 # remove them with "dmsetup remove"
 
 # Additional log infomration will be created on lvm.log
 
-
 # We will need to create several LVM objects: PV VG VOL on the image from the host
 function add_host_dependencies__lvm_host_deps() {
 	declare -g EXTRA_BUILD_DEPS="${EXTRA_BUILD_DEPS} lvm2"
 }
 
 function extension_prepare_config__lvm_image_suffix() {
-	# Add to image suffix. 
-	EXTRA_IMAGE_SUFFIXES+=("-lvm") 
+	# Add to image suffix.
+	EXTRA_IMAGE_SUFFIXES+=("-lvm")
 }
 
-function extension_prepare_config__prepare_lvm() { 
+function extension_prepare_config__prepare_lvm() {
 	# Config for lvm, boot partition is required, many bootloaders do not support LVM.
 	declare -g BOOTPART_REQUIRED=yes
 	declare -g LVM_VG_NAME="${LVM_VG_NAME:-armbivg}"
 	declare -g EXTRA_ROOTFS_MIB_SIZE=256
 	add_packages_to_image lvm2
 }
 
-function post_create_partitions__setup_lvm(){
+function post_create_partitions__setup_lvm() {
 
 	LOOP=$(losetup -f)
 	[[ -z $LOOP ]] && exit_with_error "Unable to find free loop device"
@@ -71,7 +70,7 @@ function post_create_partitions__setup_lvm(){
 	display_alert "LVM created volume group" "${EXTENSION}" "info"
 }
 
-function prepare_root_device__create_volume_group(){
+function prepare_root_device__create_volume_group() {
 	display_alert "Using LVM root" "${EXTENSION}" "info"
 	vgscan
 	vgchange -a y ${LVM_VG_NAME}
@@ -80,15 +79,15 @@ function prepare_root_device__create_volume_group(){
 	display_alert "Root device is ${rootdevice}" "${EXTENSION}" "info"
 }
 
-function format_partitions__format_lvm(){
+function format_partitions__format_lvm() {
 	# Label the root volume
 	e2label /dev/mapper/${LVM_VG_NAME}-root armbi_root
 	blkid | grep ${LVM_VG_NAME} >> "${DEST}"/${LOG_SUBPATH}/lvm.log 2>&1
 	display_alert "LVM labeled partitions" "${EXTENSION}" "info"
 }
 
-function post_umount_final_image__close_lvm(){
+function post_umount_final_image__close_lvm() {
 	# Deactivat the Volume Group
 	vgchange -a n ${LVM_VG_NAME}
 	display_alert "LVM deactivated volume group" "${EXTENSION}" "info"
-}
+}