Update README.md

README.md

@@ -1,29 +1,34 @@
 # zmk-proXiao
+
+## Corne
 
 ZMK config fo proXiao shields. 
 
 
 proXiao is a bluetooth controller for:
 
-* Corne
-* Jorne
-* Enki42
-* Fifi
-* Lily58 
-* Sofle
-* reviung41
+* [Corne](https://github.com/aroum/proXiao/tree/corne)
+* [Jorne](https://github.com/aroum/proXiao/tree/jorne)
+* [Enki42](https://github.com/aroum/proXiao/tree/enki42)
+* [Fifi](https://github.com/aroum/proXiao/tree/fifi)
+* [Lily58](https://github.com/aroum/proXiao/tree/lily58)
+* [Sofle](https://github.com/aroum/proXiao/tree/sofle)
+* [reviung41](https://github.com/aroum/proXiao/tree/reviung41)
 
-Support for Lily58, Sofle, reviung41 is implemented only on PCB v3.
+Support for Lily58, Sofle, reviung41 is implemented only on PCB v3. Screens and backlight are not supported. FTo support encoders, you need PCB v3 and solder an additional wire.
 
 ---
 
 By switching between branches in this repository, you can choose the configuration for your keyboard. For a Corne or other compatible 6-column keyboard, you should select the ```corne``` branch.
 
-If you have problems, flash the firmware to clear the settings from the branch ```setting-reset```.
+If you have problems, flash the firmware to clear the settings from the branch [setting-reset](https://github.com/aroum/proXiao/tree/setting-reset).
 
 You can change the device name in file ```config/proXiao.conf```  in line
 ```
 CONFIG_ZMK_KEYBOARD_NAME="proXiao"
 ```
 
+---
+
+Pre-build firmware can be downloaded in the [releases](https://github.com/aroum/proXiao/releases).