X11 grabber does not restart after deactivation #167
Comments
|
Thanks, Awawa |
awawa-dev
added a commit
that referenced
this issue
Feb 23, 2022
* New: Portal version 4 protocol persistent authentication support for Pipewire grabber
* New: Performance information panel in the overview tab
* New: CPU performance and RAM usage (excluding Apple M1)
* New: CPU temperature reading (Linux only, when sensor is present)
* New: Under-voltage detection (Raspberry Pi OS only)
* New: USB grabber performance
* New: Instance input mages to LED colors performance
* New: LED device output performance
* New: Philips Hue automatic connection resumption when the UDP SSL stream is broken
* Fix another LED on/off race condition (network devices that was turned off for a moment could not be turn on again)
* Fix looped communication in the remote tab
* Update MBEDTLS to v3.1.0
* Fix restart issue of X11 software screen grabber (fixes #167)
* Fix memory leaks reported by Valgrind
* Fix inter-thread communication
* Fix LED devices state synchronization
* Windows: switch project and documentation to Visual Studio 2022
* Refactoring: Remove unnecessary 'latch time' in LED devices configuration
chbartsch
pushed a commit
to chbartsch/HyperHDR
that referenced
this issue
Nov 29, 2022
* New: Portal version 4 protocol persistent authentication support for Pipewire grabber
* New: Performance information panel in the overview tab
* New: CPU performance and RAM usage (excluding Apple M1)
* New: CPU temperature reading (Linux only, when sensor is present)
* New: Under-voltage detection (Raspberry Pi OS only)
* New: USB grabber performance
* New: Instance input mages to LED colors performance
* New: LED device output performance
* New: Philips Hue automatic connection resumption when the UDP SSL stream is broken
* Fix another LED on/off race condition (network devices that was turned off for a moment could not be turn on again)
* Fix looped communication in the remote tab
* Update MBEDTLS to v3.1.0
* Fix restart issue of X11 software screen grabber (fixes awawa-dev#167)
* Fix memory leaks reported by Valgrind
* Fix inter-thread communication
* Fix LED devices state synchronization
* Windows: switch project and documentation to Visual Studio 2022
* Refactoring: Remove unnecessary 'latch time' in LED devices configuration
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Discussed in #164
Originally posted by hkalle December 5, 2021
I am running a self-compiled version of HyperHDR 18.0.0.0beta1 on a Manjaro (Arch-Linux) system of my HTPC. It is running rock solid and I understood, that I cannot start HyperHDR as a service due to Linux security aspects, since X11 grabber otherwise could grab the screen in the background. So, I start HyperHDR as a job with the window manager and screen is perfectly grabbed by X11 grabber. When I deactivate it in the remote control and try to reactivate, X11 is not starting again. I cannot find anything striking in the log. Maybe it is related to my Linux system itself? Does anyone face similar issues?
Thanks.
Log:
2021-12-05T07:48:10.315Z [MAIN] Database path: '/home/d023552/.hyperhdr/db/hyperhdr.db', readonlyMode = disabled
2021-12-05T07:48:10.315Z [MAIN] Starting HyperHdr - 18.0.0.0beta1, master (Awawa-bb43f14/c8049f1-1638126743), built: Dec 1 2021:07:40:00
2021-12-05T07:48:10.315Z [MAIN] Set user data path to '/home/d023552/.hyperhdr'
2021-12-05T07:48:10.317Z [DB] Database opened: /home/d023552/.hyperhdr/db/hyperhdr.db
2021-12-05T07:48:10.346Z [SETTINGSMGR] Settings database initialized
2021-12-05T07:48:10.346Z [HYPERHDR] Sound device is disabled
2021-12-05T07:48:10.355Z [V4L2:USB VIDEO: USB] Cropping image: width=0 height=0; crop: left=0 right=0 top=0 bottom=0
2021-12-05T07:48:10.355Z [V4L2:USB VIDEO: USB] Restarting video grabber is now blocked due to reloading of the configuration
2021-12-05T07:48:10.355Z [V4L2:USB VIDEO: USB] Cropping image: width=0 height=0; crop: left=0 right=0 top=0 bottom=0
2021-12-05T07:48:10.355Z [V4L2:USB Video: USB] (GrabberWrapper.cpp:45) CEC keycode. Start: 0, stop: 0
2021-12-05T07:48:10.355Z [V4L2:USB VIDEO: USB] (Grabber.cpp:117) Set new width: 720, height: 480 for capture
2021-12-05T07:48:10.355Z [V4L2:USB VIDEO: USB] (Grabber.cpp:291) setWidthHeight preparing to restarting video grabber 0
2021-12-05T07:48:10.355Z [V4L2:USB VIDEO: USB] Delayed restart of the grabber due to change of the capturing resolution
2021-12-05T07:48:10.355Z [V4L2:USB VIDEO: USB] Delayed restart of the grabber due to change of the framerate
2021-12-05T07:48:10.355Z [V4L2:USB VIDEO: USB] (Grabber.cpp:231) setBrightnessContrastSaturationHue nothing changed
2021-12-05T07:48:10.355Z [V4L2:USB VIDEO: USB] (V4L2Grabber.cpp:98) setHdrToneMappingMode to: Disabled
2021-12-05T07:48:10.355Z [V4L2:USB VIDEO: USB] (Grabber.cpp:140) setFpsSoftwareDecimation to: 1
2021-12-05T07:48:10.356Z [SIGNAL_OLD] (DetectionManual.cpp:85) Signal detection area set to: 0.250000,0.250000 x 0.750000,0.750000
2021-12-05T07:48:10.356Z [SIGNAL_OLD] (DetectionManual.cpp:75) Signal threshold set to: {0, 0, 0} and frames: 50
2021-12-05T07:48:10.356Z [SIGNAL_AUTO] (DetectionAutomatic.cpp:367) Automatic signal detection -> errorTolerance: 9, modelTolerance: 90, sleepTime: 1000, wakeTime: 0
2021-12-05T07:48:10.356Z [V4L2:USB VIDEO: USB] (Grabber.cpp:336) setDeviceVideoStandard preparing to restart video grabber. Old: '' new: 'USB Video: USB Video (video0)'
2021-12-05T07:48:10.356Z [V4L2:USB VIDEO: USB] Delayed restart of the grabber due to change of selected device
2021-12-05T07:48:10.356Z [V4L2:USB VIDEO: USB] (Grabber.cpp:158) Force encoding to: yuyv (old: NO_CHANGE)
2021-12-05T07:48:10.356Z [V4L2:USB VIDEO: USB] Delayed restart of the grabber due to change of the video encoding format
2021-12-05T07:48:10.356Z [V4L2:USB VIDEO: USB] setQFrameDecimation is now: enabled
2021-12-05T07:48:10.356Z [V4L2:USB Video: USB] (GrabberWrapper.cpp:525) Frame cache is: enabled
2021-12-05T07:48:10.356Z [X11_SYSTEM:AUTO] Cropping image: width=0 height=0; crop: left=0 right=0 top=0 bottom=0
2021-12-05T07:48:10.356Z [X11_SYSTEM:AUTO] Loaded X11 proxy library for screen capturing
2021-12-05T07:48:10.356Z [X11_SYSTEM:AUTO] Restarting video grabber is now blocked due to reloading of the configuration
2021-12-05T07:48:10.356Z [X11_SYSTEM:AUTO] (Grabber.cpp:117) Set new width: 512, height: 512 for capture
2021-12-05T07:48:10.356Z [X11_SYSTEM:AUTO] (Grabber.cpp:291) setWidthHeight preparing to restarting video grabber 0
2021-12-05T07:48:10.356Z [X11_SYSTEM:AUTO] Delayed restart of the grabber due to change of the capturing resolution
2021-12-05T07:48:10.356Z [X11_SYSTEM:AUTO] Delayed restart of the grabber due to change of the framerate
2021-12-05T07:48:10.356Z [SIGNAL_OLD] (DetectionManual.cpp:85) Signal detection area set to: 0.250000,0.250000 x 0.750000,0.750000
2021-12-05T07:48:10.356Z [SIGNAL_OLD] (DetectionManual.cpp:75) Signal threshold set to: {0, 0, 0} and frames: 50
2021-12-05T07:48:10.356Z [X11_SYSTEM:AUTO] (Grabber.cpp:336) setDeviceVideoStandard preparing to restart video grabber. Old: '' new: 'auto'
2021-12-05T07:48:10.356Z [X11_SYSTEM:AUTO] Delayed restart of the grabber due to change of selected device
2021-12-05T07:48:10.368Z [SETTINGSMGR] Settings database initialized
2021-12-05T07:48:10.370Z [BLACKBORDER] Set mode to: default
2021-12-05T07:48:10.370Z [COMPONENTREG0] Blackborder detector: enabled
2021-12-05T07:48:10.370Z [IMAGETOLED0] (ImageProcessor.cpp:153) set user led mapping to advanced
2021-12-05T07:48:10.370Z [IMAGETOLED0] (ImageProcessor.cpp:136) setSparseProcessing to 0
2021-12-05T07:48:10.370Z [RGB_TRANSFORM0] RGB transform classic_config: 0, saturationGain: 1.000000, luminanceGain: 1.000000, backlightThreshold: 1
2021-12-05T07:48:10.370Z [RGB_TRANSFORM0] setBacklightThreshold: 1
2021-12-05T07:48:10.370Z [ADJUST_RED0] Set correction to 255
2021-12-05T07:48:10.370Z [ADJUST_BLUE0] Set correction to 255
2021-12-05T07:48:10.370Z [ADJUST_GREEN0] Set correction to 255
2021-12-05T07:48:10.379Z [JSONSERVER] (JsonServer.cpp:28) Created instance
2021-12-05T07:48:10.379Z [JSONSERVER] Started on port 19444
2021-12-05T07:48:10.383Z [MAIN] start systray
2021-12-05T07:48:10.371Z [DB] Database opened: /home/d023552/.hyperhdr/db/hyperhdr.db
2021-12-05T07:48:10.380Z [SMOOTHING0] Clearing queued colors before: enabling
2021-12-05T07:48:10.380Z [COMPONENTREG0] Smoothing: enabled
2021-12-05T07:48:10.380Z [SMOOTHING0] Creating config (0) => type: Alternative, dirMode: false, pause: false, settlingTime: 100ms, interval: 25ms (40Hz), antiFlickTres: 32, antiFlickStep: 5, antiFlickTime: 250
2021-12-05T07:48:10.380Z [LEDDEVICE_wled] Start LedDevice 'wled'.
2021-12-05T07:48:10.380Z [SMOOTHING0] Clearing queued colors before: enabling. Smoothing configuration changed: restarting timer.
2021-12-05T07:48:10.380Z [SMOOTHING0] Selecting config (0) => type: Alternative, dirMode: false, pause: false, settlingTime: 100ms, interval: 25ms (40Hz), antiFlickTres: 32, antiFlickStep: 5, antiFlickTime: 250
2021-12-05T07:48:10.380Z [SMOOTHING0] Selecting config (0) => type: Alternative, dirMode: false, pause: false, settlingTime: 100ms, interval: 25ms (40Hz), antiFlickTres: 32, antiFlickStep: 5, antiFlickTime: 250
2021-12-05T07:48:10.380Z [LEDDEVICE_wled] (LedDeviceWled.cpp:55)
2021-12-05T07:48:10.380Z [LEDDEVICE_wled] (LedDevice.cpp:171) deviceConfig: [{"colorOrder":"rgb","currentLedCount":302,"hardwareLedCount":302,"host":"wled.fritz.box","latchTime":0,"refreshTime":0,"type":"wled"}]
2021-12-05T07:48:10.380Z [LEDDEVICE_wled] (LedDevice.cpp:194) Stopping timer
2021-12-05T07:48:10.380Z [LEDDEVICE_wled] (LedDevice.cpp:445) RefreshTime updated to 0ms
2021-12-05T07:48:10.380Z [LEDDEVICE_wled] (LedDeviceWled.cpp:63) DeviceType : wled
2021-12-05T07:48:10.380Z [FLATBUFCONN] Connecting to HyperHDR: 127.0.0.1:19401
2021-12-05T07:48:10.380Z [LEDDEVICE_wled] (LedDeviceWled.cpp:64) LedCount : 302
2021-12-05T07:48:10.380Z [LEDDEVICE_wled] (LedDeviceWled.cpp:65) ColorOrder : rgb
2021-12-05T07:48:10.380Z [LEDDEVICE_wled] (LedDeviceWled.cpp:107)
2021-12-05T07:48:10.381Z [LEDDEVICE_wled] (LedDeviceWled.cpp:118) [1]
2021-12-05T07:48:10.381Z [MUXER0] Register new input 'System/SYSTEMGRABBER' with priority 245 as inactive
2021-12-05T07:48:10.381Z [COMPONENTREG0] System capture device: enabled
2021-12-05T07:48:10.387Z [X11_SYSTEM:AUTO] (X11Grabber.cpp:122) init
2021-12-05T07:48:10.387Z [X11_SYSTEM:AUTO] (X11Grabber.cpp:141) Forcing auto discovery device
2021-12-05T07:48:10.387Z [X11_SYSTEM:AUTO] (X11Grabber.cpp:146) Auto discovery set to X11: Display nr: 0
2021-12-05T07:48:10.387Z [X11_SYSTEM:AUTO] *************************************************************************************************
2021-12-05T07:48:10.387Z [X11_SYSTEM:AUTO] Starting X11 grabber. Selected: 'X11: Display nr: 0' (0) max width: 512 (512) @ 25 fps
2021-12-05T07:48:10.387Z [X11_SYSTEM:AUTO] *************************************************************************************************
2021-12-05T07:48:10.388Z [X11_SYSTEM:AUTO] Started
2021-12-05T07:48:10.381Z [LEDDEVICE_wled] (LedDevice.cpp:171) deviceConfig: [{"colorOrder":"rgb","currentLedCount":302,"hardwareLedCount":302,"host":"wled.fritz.box","latchTime":0,"port":19446,"refreshTime":0,"type":"wled"}]
2021-12-05T07:48:10.381Z [LEDDEVICE_wled] (LedDevice.cpp:194) Stopping timer
2021-12-05T07:48:10.381Z [LEDDEVICE_wled] (LedDevice.cpp:445) RefreshTime updated to 0ms
2021-12-05T07:48:10.381Z [BOBLIGHT] Instance created
2021-12-05T07:48:10.388Z [HYPERMANAGER] HyperHDR instance 'Samsung TV' has been started
2021-12-05T07:48:10.388Z [DAEMON] Unload CEC
2021-12-05T07:48:10.388Z [DAEMON] (hyperhdr.cpp:510) libCEC was left out from the build
2021-12-05T07:48:10.383Z [FLATBUFSERVER] Started on port 19400
2021-12-05T07:48:10.383Z [PROTOSERVER] Started on port 19445
2021-12-05T07:48:10.383Z [WEBSERVER] Initialize Webserver
2021-12-05T07:48:10.383Z [WEBSERVER] Initialize Webserver
2021-12-05T07:48:10.384Z [LEDDEVICE_wled] (ProviderUdp.cpp:50) Successfully resolved IP-address (192.168.1.69) for hostname (wled.fritz.box).
2021-12-05T07:48:10.384Z [LEDDEVICE_wled] (ProviderUdp.cpp:72) UDP socket will write to 192.168.1.69:19446
2021-12-05T07:48:10.384Z [LEDDEVICE_wled] (LedDeviceWled.cpp:96) Hostname/IP : wled.fritz.box
2021-12-05T07:48:10.384Z [LEDDEVICE_wled] (LedDeviceWled.cpp:97) Port : 19446
2021-12-05T07:48:10.384Z [WEBSERVER] Apply Webserver settings
2021-12-05T07:48:10.384Z [WEBSERVER] Apply Webserver settings
2021-12-05T07:48:10.384Z [LEDDEVICE_wled] (LedDeviceWled.cpp:101) [1]
2021-12-05T07:48:10.384Z [WEBSERVER] Set document root to: :/webconfig
2021-12-05T07:48:10.384Z [WEBSERVER] Set document root to: :/webconfig
2021-12-05T07:48:10.384Z [LEDDEVICE_wled] (LedDeviceWled.cpp:130)
2021-12-05T07:48:10.384Z [WEBSERVER] Started on port 8090 name 'HyperHDR Webserver'
2021-12-05T07:48:10.384Z [LEDDEVICE] (ProviderRestApi.cpp:152) PUT: [http://wled.fritz.box/json/state] [{"on":true,"live":true}]
2021-12-05T07:48:10.387Z [WEBSERVER] Setup SSL certificate
2021-12-05T07:48:10.387Z [WEBSERVER] Setup private SSL key
2021-12-05T07:48:10.387Z [WEBSERVER] Started on port 8092 name 'HyperHDR Webserver'
2021-12-05T07:48:10.406Z [SMOOTHING0] Using alternative smoothing procedure (0)
2021-12-05T07:48:10.440Z [MUXER0] Priority 245 is now active
2021-12-05T07:48:10.440Z [MUXER0] Set visible priority to 245
2021-12-05T07:48:10.441Z [IMAGETOLED0] Total index number is: 34080. Sparse processing: disabled, image size: 480 x 270, area number: 302
2021-12-05T07:48:10.441Z [IMAGETOLED0] Total index number is: 34080. Sparse processing: disabled, image size: 480 x 270, area number: 302
2021-12-05T07:48:10.441Z [HYPERHDR0] New priority[245], previous [255]
2021-12-05T07:48:10.441Z [HYPERHDR0] New source available -> switch LED-Device on
2021-12-05T07:48:10.441Z [SMOOTHING0] Clearing queued colors before: enabling
2021-12-05T07:48:10.441Z [LEDDEVICE_wled] (LedDeviceWled.cpp:130)
2021-12-05T07:48:10.441Z [LEDDEVICE] (ProviderRestApi.cpp:152) PUT: [http://wled.fritz.box/json/state] [{"on":true,"live":true}]
2021-12-05T07:48:10.441Z [IMAGETOLED0] (ImageProcessor.cpp:180) set hard led mapping to multicolor_mean
2021-12-05T07:48:10.442Z [IMAGETOLED0] Total index number is: 34080. Sparse processing: disabled, image size: 480 x 270, area number: 302
2021-12-05T07:48:10.467Z [SMOOTHING0] Using alternative smoothing procedure (0)
2021-12-05T07:48:10.493Z [LEDDEVICE] (ProviderRestApi.cpp:191) Reply.httpStatusCode [200]
2021-12-05T07:48:10.498Z [LEDDEVICE] (ProviderRestApi.cpp:191) Reply.httpStatusCode [200]
2021-12-05T07:48:10.498Z [COMPONENTREG0] LED device: enabled
2021-12-05T07:48:10.498Z [EFFECTENGINE0] Run effect "Rainbow swirl fast" on channel 0
2021-12-05T07:48:10.498Z [EFFECTENGINE0] (EffectEngine.cpp:152) Start the effect: name [Rainbow swirl fast], smoothCfg [2]
2021-12-05T07:48:10.498Z [MUXER0] Register new input 'System/EFFECT' with priority 0 as inactive
2021-12-05T07:48:10.498Z [HYPERHDR] Initial foreground effect 'Rainbow swirl fast' started
2021-12-05T07:48:10.499Z [SMOOTHING0] Using alternative smoothing input (0)
2021-12-05T07:48:10.499Z [EFFECT0(Rainbo...)] Begin playing the effect with priority: 0
2021-12-05T07:48:10.499Z [MUXER0] Priority 0 is now active
2021-12-05T07:48:10.499Z [MUXER0] Set visible priority to 0
2021-12-05T07:48:10.499Z [IMAGETOLED0] Total index number is: 1208. Sparse processing: disabled, image size: 80 x 45, area number: 302
2021-12-05T07:48:10.499Z [SMOOTHING0] Clearing queued colors before: enabling. Smoothing configuration changed: restarting timer.
2021-12-05T07:48:10.500Z [SMOOTHING0] Selecting config (2) => type: Linear, dirMode: false, pause: false, settlingTime: 200ms, interval: 40ms (25Hz), antiFlickTres: 0, antiFlickStep: 0, antiFlickTime: 0
2021-12-05T07:48:10.500Z [SMOOTHING0] Using linear smoothing input (2)
2021-12-05T07:48:10.500Z [HYPERHDR0] New priority[0], previous [245]
2021-12-05T07:48:10.500Z [IMAGETOLED0] (ImageProcessor.cpp:180) set hard led mapping to multicolor_mean
2021-12-05T07:48:10.500Z [IMAGETOLED0] Total index number is: 1208. Sparse processing: disabled, image size: 80 x 45, area number: 302
2021-12-05T07:48:10.540Z [SMOOTHING0] Using linear smoothing procedure (2)
2021-12-05T07:48:12.500Z [EFFECT0(Rainbo...)] The effect quits with priority: 0
2021-12-05T07:48:12.500Z [MUXER0] Removed source priority 0
2021-12-05T07:48:12.500Z [MUXER0] Set visible priority to 245
2021-12-05T07:48:12.500Z [IMAGETOLED0] Total index number is: 34080. Sparse processing: disabled, image size: 480 x 270, area number: 302
2021-12-05T07:48:12.501Z [SMOOTHING0] Clearing queued colors before: enabling. Smoothing configuration changed: restarting timer.
2021-12-05T07:48:12.501Z [SMOOTHING0] Selecting config (0) => type: Alternative, dirMode: false, pause: false, settlingTime: 100ms, interval: 25ms (40Hz), antiFlickTres: 32, antiFlickStep: 5, antiFlickTime: 250
2021-12-05T07:48:12.501Z [SMOOTHING0] Using alternative smoothing input (0)
2021-12-05T07:48:12.501Z [HYPERHDR0] New priority[245], previous [0]
2021-12-05T07:48:12.501Z [IMAGETOLED0] (ImageProcessor.cpp:180) set hard led mapping to multicolor_mean
2021-12-05T07:48:12.501Z [IMAGETOLED0] Total index number is: 34080. Sparse processing: disabled, image size: 480 x 270, area number: 302
2021-12-05T07:48:12.501Z [EFFECTENGINE0] Effect 'Rainbow swirl fast' has finished.
2021-12-05T07:48:12.501Z [EFFECT0(Rainbo...)] Deleting effect named: 'Rainbow swirl fast'
2021-12-05T07:48:12.526Z [SMOOTHING0] Using alternative smoothing procedure (0)
2021-12-05T07:48:14.658Z [WEBSOCKET] (WebSocketClient.cpp:30) New connection from ::ffff:192.168.1.46
2021-12-05T07:48:14.659Z [WEBSOCKET] (JsonAPI.cpp:89) Client '::ffff:192.168.1.46' switch to HyperHDR instance 0
2021-12-05T07:48:14.733Z [DB] Database opened: /home/d023552/.hyperhdr/db/hyperhdr.db
2021-12-05T07:48:14.817Z [WEBSOCKET] (JsonAPI.cpp:1348) log streaming activated for client ::ffff:192.168.1.46
2021-12-05T07:48:35.204Z [SMOOTHING0] Emergency enabling timer. Now timer is active: 1, remaining time to run: -1
2021-12-05T07:48:35.265Z [WEBSOCKET] (JsonAPI.cpp:1357) log streaming deactivated for client ::ffff:192.168.1.46
2021-12-05T07:48:35.798Z [SMOOTHING0] Emergency enabling timer. Now timer is active: 1, remaining time to run: 25
2021-12-05T07:48:40.109Z [MUXER0] Removed source priority 245
2021-12-05T07:48:40.109Z [MUXER0] Set visible priority to 255
2021-12-05T07:48:40.109Z [HYPERHDR0] New priority[255], previous [245]
2021-12-05T07:48:40.109Z [HYPERHDR0] No source left -> switch LED-Device off
2021-12-05T07:48:40.109Z [SMOOTHING0] Clearing queued colors before: disabling
2021-12-05T07:48:40.109Z [LEDDEVICE_wled] (LedDeviceWled.cpp:148)
2021-12-05T07:48:40.110Z [LEDDEVICE] (ProviderRestApi.cpp:152) PUT: [http://wled.fritz.box/json/state] [{"on":false,"live":false}]
2021-12-05T07:48:40.111Z [IMAGETOLED0] (ImageProcessor.cpp:180) set hard led mapping to multicolor_mean
2021-12-05T07:48:40.111Z [COMPONENTREG0] System capture device: disabled
2021-12-05T07:48:40.123Z [X11_SYSTEM:AUTO] Stopped
2021-12-05T07:48:40.235Z [LEDDEVICE] (ProviderRestApi.cpp:191) Reply.httpStatusCode [200]
2021-12-05T07:48:43.178Z [MUXER0] Register new input 'System/SYSTEMGRABBER' with priority 245 as inactive
2021-12-05T07:48:43.178Z [COMPONENTREG0] System capture device: enabled
2021-12-05T07:48:43.178Z [X11_SYSTEM:AUTO] (X11Grabber.cpp:122) init
2021-12-05T07:48:43.179Z [X11_SYSTEM:AUTO] Started
2021-12-05T07:48:48.704Z [WEBSOCKET] (JsonAPI.cpp:1348) log streaming activated for client ::ffff:192.168.1.46
The text was updated successfully, but these errors were encountered: