docs: update READMEs and sample snippets so they don't reference constructs tructs that have been renamed.

design/aws-ecs/aws-ecs-autoscaling-queue-worker.md

@@ -147,7 +147,7 @@ export interface QueueProcessingEc2ServiceProps {
 An example use case:
 ```ts
 // Create the vpc and cluster used by the queue processing service
-const vpc = new ec2.VpcNetwork(stack, 'Vpc', { maxAZs: 1 });
+const vpc = new ec2.Vpc(stack, 'Vpc', { maxAZs: 1 });
 const cluster = new ecs.Cluster(stack, 'EcsCluster', { vpc });
 cluster.addCapacity('DefaultAutoScalingGroup', {
   instanceType: new ec2.InstanceType('t2.micro')
@@ -219,7 +219,7 @@ export interface QueueProcessingFargateServiceProps {
 An example use case:
 ```ts
 // Create the vpc and cluster used by the queue processing service
-const vpc = new ec2.VpcNetwork(stack, 'Vpc', { maxAZs: 2 });
+const vpc = new ec2.Vpc(stack, 'Vpc', { maxAZs: 2 });
 const cluster = new ecs.Cluster(stack, 'FargateCluster', { vpc });
 const queue = new sqs.Queue(stack, 'ProcessingQueue', { 
   QueueName: 'FargateEventQueue'

design/aws-ecs/aws-ecs-scheduled-ecs-task-construct.md

@@ -118,7 +118,7 @@ The `ScheduledEc2Task` construct will use the following existing constructs:
 An example use case to create a task that is scheduled to run every minute:
 ```ts
 // Create the vpc and cluster used by the scheduled task
-const vpc = new ec2.VpcNetwork(stack, 'Vpc', { maxAZs: 1 });
+const vpc = new ec2.Vpc(stack, 'Vpc', { maxAZs: 1 });
 const cluster = new ecs.Cluster(stack, 'EcsCluster', { vpc });
 cluster.addCapacity('DefaultAutoScalingGroup', {
   instanceType: new ec2.InstanceType('t2.micro')

design/aws-ecs/aws-ecs-service-discovery-integration.md

@@ -58,7 +58,7 @@ export interface NamespaceOptions {
    *
    * @default VPC of the cluster for Private DNS Namespace, otherwise none
    */
-  vpc?: ec2.IVpcNetwork;
+  vpc?: ec2.IVpc;
 }
 ```
 
@@ -122,7 +122,7 @@ export interface ServiceDiscoveryOptions {
 A full example would look like the following:
 
 ```
-const vpc = new ec2.VpcNetwork(stack, 'Vpc', { maxAZs: 2 });
+const vpc = new ec2.Vpc(stack, 'Vpc', { maxAZs: 2 });
 
 // Cloud Map Namespace
 const namespace = new servicediscovery.PrivateDnsNamespace(stack, 'MyNamespace', {

packages/@aws-cdk/aws-cloudtrail/README.md

@@ -19,7 +19,7 @@ Example usage:
 ```ts
 import cloudtrail = require('@aws-cdk/aws-cloudtrail');
 
-const trail = new cloudtrail.CloudTrail(this, 'CloudTrail');
+const trail = new cloudtrail.Trail(this, 'CloudTrail');
 ```
 
 You can instantiate the CloudTrail construct with no arguments - this will by default:
@@ -43,7 +43,7 @@ For example, to log to CloudWatch Logs
 
 import cloudtrail = require('@aws-cdk/aws-cloudtrail');
 
-const trail = new cloudtrail.CloudTrail(this, 'CloudTrail', {
+const trail = new cloudtrail.Trail(this, 'CloudTrail', {
   sendToCloudWatchLogs: true
 });
 ```
@@ -58,7 +58,7 @@ Example:
 ```ts
 import cloudtrail = require('@aws-cdk/aws-cloudtrail');
 
-const trail = new cloudtrail.CloudTrail(this, 'MyAmazingCloudTrail');
+const trail = new cloudtrail.Trail(this, 'MyAmazingCloudTrail');
 
 // Adds an event selector to the bucket magic-bucket.
 // By default, this includes management events and all operations (Read + Write)

packages/@aws-cdk/aws-codebuild/README.md

@@ -316,7 +316,7 @@ For example:
 
 ```ts
 const stack = new cdk.Stack(app, 'aws-cdk-codebuild-project-vpc');
-const vpc = new ec2.VpcNetwork(stack, 'MyVPC');
+const vpc = new ec2.Vpc(stack, 'MyVPC');
 const securityGroup = new ec2.SecurityGroup(stack, 'SecurityGroup1', {
     allowAllOutbound: true,
     description: 'Example',

packages/@aws-cdk/aws-codepipeline-actions/README.md

@@ -107,7 +107,7 @@ You can do it through the CDK:
 import cloudtrail = require('@aws-cdk/aws-cloudtrail');
 
 const key = 'some/key.zip';
-const trail = new cloudtrail.CloudTrail(this, 'CloudTrail');
+const trail = new cloudtrail.Trail(this, 'CloudTrail');
 trail.addS3EventSelector([sourceBucket.arnForObjects(key)], {
   readWriteType: cloudtrail.ReadWriteType.WriteOnly,
 });

packages/@aws-cdk/aws-ec2/README.md

@@ -19,34 +19,34 @@ instances.
 
 Most projects need a Virtual Private Cloud to provide security by means of
 network partitioning. This is easily achieved by creating an instance of
-`VpcNetwork`:
+`Vpc`:
 
 ```ts
 import ec2 = require('@aws-cdk/aws-ec2');
 
-const vpc = new ec2.VpcNetwork(this, 'VPC');
+const vpc = new ec2.Vpc(this, 'VPC');
 ```
 
 All default Constructs requires EC2 instances to be launched inside a VPC, so
 you should generally start by defining a VPC whenever you need to launch
 instances for your project.
 
-Our default `VpcNetwork` class creates a private and public subnet for every
+Our default `Vpc` class creates a private and public subnet for every
 availability zone. Classes that use the VPC will generally launch instances
 into all private subnets, and provide a parameter called `vpcSubnets` to
 allow you to override the placement. [Read more about
 subnets](https://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/VPC_Subnets.html).
 
 
 #### Advanced Subnet Configuration
-If you require the ability to configure subnets the `VpcNetwork` can be
+If you require the ability to configure subnets the `Vpc` can be
 customized with `SubnetConfiguration` array. This is best explained by an
 example:
 
 ```ts
 import ec2 = require('@aws-cdk/aws-ec2');
 
-const vpc = new ec2.VpcNetwork(this, 'TheVPC', {
+const vpc = new ec2.Vpc(this, 'TheVPC', {
   cidr: '10.0.0.0/21',
   subnetConfiguration: [
     {
@@ -71,7 +71,7 @@ const vpc = new ec2.VpcNetwork(this, 'TheVPC', {
 The example above is one possible configuration, but the user can use the
 constructs above to implement many other network configurations.
 
-The `VpcNetwork` from the above configuration in a Region with three
+The `Vpc` from the above configuration in a Region with three
 availability zones will be the following:
  * IngressSubnet1: 10.0.0.0/24
  * IngressSubnet2: 10.0.1.0/24
@@ -110,7 +110,7 @@ distributed for the application.
 ```ts
 import ec2 = require('@aws-cdk/aws-ec2');
 
-const vpc = new ec2.VpcNetwork(this, 'TheVPC', {
+const vpc = new ec2.Vpc(this, 'TheVPC', {
   cidr: '10.0.0.0/16',
   natGateways: 1,
   subnetConfiguration: [
@@ -132,7 +132,7 @@ const vpc = new ec2.VpcNetwork(this, 'TheVPC', {
 });
 ```
 
-The `VpcNetwork` from the above configuration in a Region with three
+The `Vpc` from the above configuration in a Region with three
 availability zones will be the following:
  * PublicSubnet1: 10.0.0.0/26
  * PublicSubnet2: 10.0.0.64/26
@@ -156,7 +156,7 @@ traffic. This can be accomplished with a single parameter configuration:
 ```ts
 import ec2 = require('@aws-cdk/aws-ec2');
 
-const vpc = new ec2.VpcNetwork(this, 'TheVPC', {
+const vpc = new ec2.Vpc(this, 'TheVPC', {
   cidr: '10.0.0.0/16',
   natGateways: 1,
   natGatewayPlacement: {subnetName: 'Public'},
@@ -180,7 +180,7 @@ const vpc = new ec2.VpcNetwork(this, 'TheVPC', {
 });
 ```
 
-The `VpcNetwork` above will have the exact same subnet definitions as listed
+The `Vpc` above will have the exact same subnet definitions as listed
 above. However, this time the VPC will have only 1 NAT Gateway and all
 Application subnets will route to the NAT Gateway.
 
@@ -193,7 +193,7 @@ by setting the `reserved` subnetConfiguration property to true, as shown below:
 
 ```ts
 import ec2 = require('@aws-cdk/aws-ec2');
-const vpc = new ec2.VpcNetwork(this, 'TheVPC', {
+const vpc = new ec2.Vpc(this, 'TheVPC', {
   cidr: '10.0.0.0/16',
   natGateways: 1,
   subnetConfiguration: [
@@ -240,7 +240,7 @@ can reuse a VPC defined in one Stack in another by using `export()` and
 
 #### Importing an existing VPC
 
-If your VPC is created outside your CDK app, you can use `importFromContext()`:
+If your VPC is created outside your CDK app, you can use `fromLookup()`:
 
 [importing existing VPCs](test/integ.import-default-vpc.lit.ts)
 
@@ -367,7 +367,7 @@ selectable by instantiating one of these classes:
 Create your VPC with VPN connections by specifying the `vpnConnections` props (keys are construct `id`s):
 
 ```ts
-const vpc = new ec2.VpcNetwork(stack, 'MyVpc', {
+const vpc = new ec2.Vpc(stack, 'MyVpc', {
   vpnConnections: {
     dynamic: { // Dynamic routing (BGP)
       ip: '1.2.3.4'
@@ -386,7 +386,7 @@ const vpc = new ec2.VpcNetwork(stack, 'MyVpc', {
 To create a VPC that can accept VPN connections, set `vpnGateway` to `true`:
 
 ```ts
-const vpc = new ec2.VpcNetwork(stack, 'MyVpc', {
+const vpc = new ec2.Vpc(stack, 'MyVpc', {
   vpnGateway: true
 });
 ```

packages/@aws-cdk/aws-elasticloadbalancingv2/README.md

@@ -32,7 +32,7 @@ import autoscaling = require('@aws-cdk/aws-autoscaling');
 
 // ...
 
-const vpc = new ec2.VpcNetwork(...);
+const vpc = new ec2.Vpc(...);
 
 // Create the load balancer in a VPC. 'internetFacing' is 'false'
 // by default, which creates an internal load balancer.

packages/@aws-cdk/aws-glue/README.md

@@ -109,7 +109,7 @@ new glue.Table(stack, 'MyTable', {
 // with an explicit KMS key
 new glue.Table(stack, 'MyTable', {
   encryption: glue.TableEncryption.Kms,
-  encryptionKey: new kms.EncryptionKey(stack, 'MyKey')
+  encryptionKey: new kms.Key(stack, 'MyKey')
   ...
 });
 ```
@@ -131,7 +131,7 @@ new glue.Table(stack, 'MyTable', {
 // with an explicit KMS key
 new glue.Table(stack, 'MyTable', {
   encryption: glue.TableEncryption.ClientSideKms,
-  encryptionKey: new kms.EncryptionKey(stack, 'MyKey')
+  encryptionKey: new kms.Key(stack, 'MyKey')
   ...
 });
 ```

packages/@aws-cdk/aws-kinesis/README.md

@@ -28,13 +28,13 @@ const stream = newStream(this, 'MyEncryptedStream', {
 });
 
 // you can access the encryption key:
-assert(stream.encryptionKey instanceof kms.EncryptionKey);
+assert(stream.encryptionKey instanceof kms.Key);
 ```
 
 You can also supply your own key:
 
 ```ts
-const myKmsKey = new kms.EncryptionKey(this, 'MyKey');
+const myKmsKey = new kms.Key(this, 'MyKey');
 
 const stream = new Stream(this, 'MyEncryptedStream', {
     encryption: StreamEncryption.Kms,

packages/@aws-cdk/aws-route53/README.md

@@ -30,7 +30,7 @@ VPC you're configuring for private hosted zones.
 import ec2 = require('@aws-cdk/aws-ec2');
 import route53 = require('@aws-cdk/aws-route53');
 
-const vpc = new ec2.VpcNetwork(this, 'VPC');
+const vpc = new ec2.Vpc(this, 'VPC');
 
 const zone = new route53.PrivateHostedZone(this, 'HostedZone', {
   zoneName: 'fully.qualified.domain.com',

packages/@aws-cdk/aws-s3/README.md

@@ -47,7 +47,7 @@ assert(bucket.encryptionKey instanceof kms.Key);
 You can also supply your own key:
 
 ```ts
-const myKmsKey = new kms.EncryptionKey(this, 'MyKey');
+const myKmsKey = new kms.Key(this, 'MyKey');
 
 const bucket = new Bucket(this, 'MyEncryptedBucket', {
     encryption: BucketEncryption.Kms,

packages/@aws-cdk/cdk/README.md

@@ -112,7 +112,7 @@ As you can see many tags are generated with only a few intent based directives.
 
 ```ts
 // snip //
-const vpc = new ec2.VpcNetwork(marketingStack, 'MarketingVpc', {
+const vpc = new ec2.Vpc(marketingStack, 'MarketingVpc', {
   maxAZs: 3 // Default is all AZs in region
   });
 // override the VPC tags with Platform
@@ -150,7 +150,7 @@ true. If false the property is set accordingly.
 
 ```ts
 // ... snip
-const vpc = new ec2.VpcNetwork(this, 'MyVpc', { ... });
+const vpc = new ec2.Vpc(this, 'MyVpc', { ... });
 vpc.node.apply(new cdk.Tag('MyKey', 'MyValue', { applyToLaunchedInstances: false }));
 // ... snip
 ```
@@ -164,12 +164,12 @@ interpreted as apply to any resource type.
 
 ```ts
 // ... snip
-const vpc = new ec2.VpcNetwork(this, 'MyVpc', { ... });
+const vpc = new ec2.Vpc(this, 'MyVpc', { ... });
 vpc.node.apply(new cdk.Tag('MyKey', 'MyValue', { includeResourceTypes: ['AWS::EC2::Subnet']}));
 // ... snip
 ```
 
-#### excludeResourceTypes 
+#### excludeResourceTypes
 
 Exclude is the inverse of include. Exclude is also an array of CloudFormation
 Resource Types. As the aspect visit nodes it will not take action if the node is
@@ -179,7 +179,7 @@ over include in the event of a collision.
 
 ```ts
 // ... snip
-const vpc = new ec2.VpcNetwork(this, 'MyVpc', { ... });
+const vpc = new ec2.Vpc(this, 'MyVpc', { ... });
 vpc.node.apply(new cdk.Tag('MyKey', 'MyValue', { exludeResourceTypes: ['AWS::EC2::Subnet']}));
 // ... snip
 ```
@@ -193,7 +193,7 @@ setting for removing tags uses a higher priority than the standard tag.
 
 ```ts
 // ... snip
-const vpc = new ec2.VpcNetwork(this, 'MyVpc', { ... });
+const vpc = new ec2.Vpc(this, 'MyVpc', { ... });
 vpc.node.apply(new cdk.Tag('MyKey', 'MyValue', { priority: 2 }));
 // ... snip
 ```

packages/decdk/README.md

@@ -90,7 +90,7 @@ If deCDK encounters a reference to another __construct__ (a type that extends `c
 ```yaml
 Resources:
   VPC:
-    Type: "@aws-cdk/aws-ec2.VpcNetwork"
+    Type: "@aws-cdk/aws-ec2.Vpc"
     Properties:
       maxAZs: 1
   Cluster: