Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

config: enable internal Ethernet PHY driver. #7

Merged
merged 1 commit into from
Jul 18, 2017
Merged

config: enable internal Ethernet PHY driver. #7

merged 1 commit into from
Jul 18, 2017

Conversation

xalius
Copy link

@xalius xalius commented Jul 18, 2017

No description provided.

@ayufan ayufan merged commit c0d4377 into ayufan-rock64:release-4.4 Jul 18, 2017
ayufan pushed a commit that referenced this pull request Dec 17, 2017
@ebiggers @gregkh
KEYS: fix NULL pointer dereference during ASN.1 parsing [ver #2]
3fc61b8 
commit 624f5ab upstream.

syzkaller reported a NULL pointer dereference in asn1_ber_decoder().  It
can be reproduced by the following command, assuming
CONFIG_PKCS7_TEST_KEY=y:

        keyctl add pkcs7_test desc '' @s

The bug is that if the data buffer is empty, an integer underflow occurs
in the following check:

        if (unlikely(dp >= datalen - 1))
                goto data_overrun_error;

This results in the NULL data pointer being dereferenced.

Fix it by checking for 'datalen - dp < 2' instead.

Also fix the similar check for 'dp >= datalen - n' later in the same
function.  That one possibly could result in a buffer overread.

The NULL pointer dereference was reproducible using the "pkcs7_test" key
type but not the "asymmetric" key type because the "asymmetric" key type
checks for a 0-length payload before calling into the ASN.1 decoder but
the "pkcs7_test" key type does not.

The bug report was:

    BUG: unable to handle kernel NULL pointer dereference at           (null)
    IP: asn1_ber_decoder+0x17f/0xe60 lib/asn1_decoder.c:233
    PGD 7b708067 P4D 7b708067 PUD 7b6ee067 PMD 0
    Oops: 0000 [#1] SMP
    Modules linked in:
    CPU: 0 PID: 522 Comm: syz-executor1 Not tainted 4.14.0-rc8 #7
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.3-20171021_125229-anatol 04/01/2014
    task: ffff9b6b3798c040 task.stack: ffff9b6b37970000
    RIP: 0010:asn1_ber_decoder+0x17f/0xe60 lib/asn1_decoder.c:233
    RSP: 0018:ffff9b6b37973c78 EFLAGS: 00010216
    RAX: 0000000000000000 RBX: 0000000000000000 RCX: 000000000000021c
    RDX: ffffffff814a04ed RSI: ffffb1524066e000 RDI: ffffffff910759e0
    RBP: ffff9b6b37973d60 R08: 0000000000000001 R09: ffff9b6b3caa4180
    R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000002
    R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
    FS:  00007f10ed1f2700(0000) GS:ffff9b6b3ea00000(0000) knlGS:0000000000000000
    CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    CR2: 0000000000000000 CR3: 000000007b6f3000 CR4: 00000000000006f0
    Call Trace:
     pkcs7_parse_message+0xee/0x240 crypto/asymmetric_keys/pkcs7_parser.c:139
     verify_pkcs7_signature+0x33/0x180 certs/system_keyring.c:216
     pkcs7_preparse+0x41/0x70 crypto/asymmetric_keys/pkcs7_key_type.c:63
     key_create_or_update+0x180/0x530 security/keys/key.c:855
     SYSC_add_key security/keys/keyctl.c:122 [inline]
     SyS_add_key+0xbf/0x250 security/keys/keyctl.c:62
     entry_SYSCALL_64_fastpath+0x1f/0xbe
    RIP: 0033:0x4585c9
    RSP: 002b:00007f10ed1f1bd8 EFLAGS: 00000216 ORIG_RAX: 00000000000000f8
    RAX: ffffffffffffffda RBX: 00007f10ed1f2700 RCX: 00000000004585c9
    RDX: 0000000020000000 RSI: 0000000020008ffb RDI: 0000000020008000
    RBP: 0000000000000000 R08: ffffffffffffffff R09: 0000000000000000
    R10: 0000000000000000 R11: 0000000000000216 R12: 00007fff1b2260ae
    R13: 00007fff1b2260af R14: 00007f10ed1f2700 R15: 0000000000000000
    Code: dd ca ff 48 8b 45 88 48 83 e8 01 4c 39 f0 0f 86 a8 07 00 00 e8 53 dd ca ff 49 8d 46 01 48 89 85 58 ff ff ff 48 8b 85 60 ff ff ff <42> 0f b6 0c 30 89 c8 88 8d 75 ff ff ff 83 e0 1f 89 8d 28 ff ff
    RIP: asn1_ber_decoder+0x17f/0xe60 lib/asn1_decoder.c:233 RSP: ffff9b6b37973c78
    CR2: 0000000000000000

Fixes: 42d5ec2 ("X.509: Add an ASN.1 decoder")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ayufan pushed a commit that referenced this pull request Feb 19, 2018
@gregkh
inet: frag: release spinlock before calling icmp_send()
1d75c21 
[ Upstream commit ec4fbd6 ]

Dmitry reported a lockdep splat [1] (false positive) that we can fix
by releasing the spinlock before calling icmp_send() from ip_expire()

This is a false positive because sending an ICMP message can not
possibly re-enter the IP frag engine.

[1]
[ INFO: possible circular locking dependency detected ]
4.10.0+ #29 Not tainted
-------------------------------------------------------
modprobe/12392 is trying to acquire lock:
 (_xmit_ETHER#2){+.-...}, at: [<ffffffff837a8182>] spin_lock
include/linux/spinlock.h:299 [inline]
 (_xmit_ETHER#2){+.-...}, at: [<ffffffff837a8182>] __netif_tx_lock
include/linux/netdevice.h:3486 [inline]
 (_xmit_ETHER#2){+.-...}, at: [<ffffffff837a8182>]
sch_direct_xmit+0x282/0x6d0 net/sched/sch_generic.c:180

but task is already holding lock:
 (&(&q->lock)->rlock){+.-...}, at: [<ffffffff8389a4d1>] spin_lock
include/linux/spinlock.h:299 [inline]
 (&(&q->lock)->rlock){+.-...}, at: [<ffffffff8389a4d1>]
ip_expire+0x51/0x6c0 net/ipv4/ip_fragment.c:201

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #1 (&(&q->lock)->rlock){+.-...}:
       validate_chain kernel/locking/lockdep.c:2267 [inline]
       __lock_acquire+0x2149/0x3430 kernel/locking/lockdep.c:3340
       lock_acquire+0x2a1/0x630 kernel/locking/lockdep.c:3755
       __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline]
       _raw_spin_lock+0x33/0x50 kernel/locking/spinlock.c:151
       spin_lock include/linux/spinlock.h:299 [inline]
       ip_defrag+0x3a2/0x4130 net/ipv4/ip_fragment.c:669
       ip_check_defrag+0x4e3/0x8b0 net/ipv4/ip_fragment.c:713
       packet_rcv_fanout+0x282/0x800 net/packet/af_packet.c:1459
       deliver_skb net/core/dev.c:1834 [inline]
       dev_queue_xmit_nit+0x294/0xa90 net/core/dev.c:1890
       xmit_one net/core/dev.c:2903 [inline]
       dev_hard_start_xmit+0x16b/0xab0 net/core/dev.c:2923
       sch_direct_xmit+0x31f/0x6d0 net/sched/sch_generic.c:182
       __dev_xmit_skb net/core/dev.c:3092 [inline]
       __dev_queue_xmit+0x13e5/0x1e60 net/core/dev.c:3358
       dev_queue_xmit+0x17/0x20 net/core/dev.c:3423
       neigh_resolve_output+0x6b9/0xb10 net/core/neighbour.c:1308
       neigh_output include/net/neighbour.h:478 [inline]
       ip_finish_output2+0x8b8/0x15a0 net/ipv4/ip_output.c:228
       ip_do_fragment+0x1d93/0x2720 net/ipv4/ip_output.c:672
       ip_fragment.constprop.54+0x145/0x200 net/ipv4/ip_output.c:545
       ip_finish_output+0x82d/0xe10 net/ipv4/ip_output.c:314
       NF_HOOK_COND include/linux/netfilter.h:246 [inline]
       ip_output+0x1f0/0x7a0 net/ipv4/ip_output.c:404
       dst_output include/net/dst.h:486 [inline]
       ip_local_out+0x95/0x170 net/ipv4/ip_output.c:124
       ip_send_skb+0x3c/0xc0 net/ipv4/ip_output.c:1492
       ip_push_pending_frames+0x64/0x80 net/ipv4/ip_output.c:1512
       raw_sendmsg+0x26de/0x3a00 net/ipv4/raw.c:655
       inet_sendmsg+0x164/0x5b0 net/ipv4/af_inet.c:761
       sock_sendmsg_nosec net/socket.c:633 [inline]
       sock_sendmsg+0xca/0x110 net/socket.c:643
       ___sys_sendmsg+0x4a3/0x9f0 net/socket.c:1985
       __sys_sendmmsg+0x25c/0x750 net/socket.c:2075
       SYSC_sendmmsg net/socket.c:2106 [inline]
       SyS_sendmmsg+0x35/0x60 net/socket.c:2101
       do_syscall_64+0x2e8/0x930 arch/x86/entry/common.c:281
       return_from_SYSCALL_64+0x0/0x7a

-> #0 (_xmit_ETHER#2){+.-...}:
       check_prev_add kernel/locking/lockdep.c:1830 [inline]
       check_prevs_add+0xa8f/0x19f0 kernel/locking/lockdep.c:1940
       validate_chain kernel/locking/lockdep.c:2267 [inline]
       __lock_acquire+0x2149/0x3430 kernel/locking/lockdep.c:3340
       lock_acquire+0x2a1/0x630 kernel/locking/lockdep.c:3755
       __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline]
       _raw_spin_lock+0x33/0x50 kernel/locking/spinlock.c:151
       spin_lock include/linux/spinlock.h:299 [inline]
       __netif_tx_lock include/linux/netdevice.h:3486 [inline]
       sch_direct_xmit+0x282/0x6d0 net/sched/sch_generic.c:180
       __dev_xmit_skb net/core/dev.c:3092 [inline]
       __dev_queue_xmit+0x13e5/0x1e60 net/core/dev.c:3358
       dev_queue_xmit+0x17/0x20 net/core/dev.c:3423
       neigh_hh_output include/net/neighbour.h:468 [inline]
       neigh_output include/net/neighbour.h:476 [inline]
       ip_finish_output2+0xf6c/0x15a0 net/ipv4/ip_output.c:228
       ip_finish_output+0xa29/0xe10 net/ipv4/ip_output.c:316
       NF_HOOK_COND include/linux/netfilter.h:246 [inline]
       ip_output+0x1f0/0x7a0 net/ipv4/ip_output.c:404
       dst_output include/net/dst.h:486 [inline]
       ip_local_out+0x95/0x170 net/ipv4/ip_output.c:124
       ip_send_skb+0x3c/0xc0 net/ipv4/ip_output.c:1492
       ip_push_pending_frames+0x64/0x80 net/ipv4/ip_output.c:1512
       icmp_push_reply+0x372/0x4d0 net/ipv4/icmp.c:394
       icmp_send+0x156c/0x1c80 net/ipv4/icmp.c:754
       ip_expire+0x40e/0x6c0 net/ipv4/ip_fragment.c:239
       call_timer_fn+0x241/0x820 kernel/time/timer.c:1268
       expire_timers kernel/time/timer.c:1307 [inline]
       __run_timers+0x960/0xcf0 kernel/time/timer.c:1601
       run_timer_softirq+0x21/0x80 kernel/time/timer.c:1614
       __do_softirq+0x31f/0xbe7 kernel/softirq.c:284
       invoke_softirq kernel/softirq.c:364 [inline]
       irq_exit+0x1cc/0x200 kernel/softirq.c:405
       exiting_irq arch/x86/include/asm/apic.h:657 [inline]
       smp_apic_timer_interrupt+0x76/0xa0 arch/x86/kernel/apic/apic.c:962
       apic_timer_interrupt+0x93/0xa0 arch/x86/entry/entry_64.S:707
       __read_once_size include/linux/compiler.h:254 [inline]
       atomic_read arch/x86/include/asm/atomic.h:26 [inline]
       rcu_dynticks_curr_cpu_in_eqs kernel/rcu/tree.c:350 [inline]
       __rcu_is_watching kernel/rcu/tree.c:1133 [inline]
       rcu_is_watching+0x83/0x110 kernel/rcu/tree.c:1147
       rcu_read_lock_held+0x87/0xc0 kernel/rcu/update.c:293
       radix_tree_deref_slot include/linux/radix-tree.h:238 [inline]
       filemap_map_pages+0x6d4/0x1570 mm/filemap.c:2335
       do_fault_around mm/memory.c:3231 [inline]
       do_read_fault mm/memory.c:3265 [inline]
       do_fault+0xbd5/0x2080 mm/memory.c:3370
       handle_pte_fault mm/memory.c:3600 [inline]
       __handle_mm_fault+0x1062/0x2cb0 mm/memory.c:3714
       handle_mm_fault+0x1e2/0x480 mm/memory.c:3751
       __do_page_fault+0x4f6/0xb60 arch/x86/mm/fault.c:1397
       do_page_fault+0x54/0x70 arch/x86/mm/fault.c:1460
       page_fault+0x28/0x30 arch/x86/entry/entry_64.S:1011

other info that might help us debug this:

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(&(&q->lock)->rlock);
                               lock(_xmit_ETHER#2);
                               lock(&(&q->lock)->rlock);
  lock(_xmit_ETHER#2);

 *** DEADLOCK ***

10 locks held by modprobe/12392:
 #0:  (&mm->mmap_sem){++++++}, at: [<ffffffff81329758>]
__do_page_fault+0x2b8/0xb60 arch/x86/mm/fault.c:1336
 #1:  (rcu_read_lock){......}, at: [<ffffffff8188cab6>]
filemap_map_pages+0x1e6/0x1570 mm/filemap.c:2324
 #2:  (&(ptlock_ptr(page))->rlock#2){+.+...}, at: [<ffffffff81984a78>]
spin_lock include/linux/spinlock.h:299 [inline]
 #2:  (&(ptlock_ptr(page))->rlock#2){+.+...}, at: [<ffffffff81984a78>]
pte_alloc_one_map mm/memory.c:2944 [inline]
 #2:  (&(ptlock_ptr(page))->rlock#2){+.+...}, at: [<ffffffff81984a78>]
alloc_set_pte+0x13b8/0x1b90 mm/memory.c:3072
 #3:  (((&q->timer))){+.-...}, at: [<ffffffff81627e72>]
lockdep_copy_map include/linux/lockdep.h:175 [inline]
 #3:  (((&q->timer))){+.-...}, at: [<ffffffff81627e72>]
call_timer_fn+0x1c2/0x820 kernel/time/timer.c:1258
 #4:  (&(&q->lock)->rlock){+.-...}, at: [<ffffffff8389a4d1>] spin_lock
include/linux/spinlock.h:299 [inline]
 #4:  (&(&q->lock)->rlock){+.-...}, at: [<ffffffff8389a4d1>]
ip_expire+0x51/0x6c0 net/ipv4/ip_fragment.c:201
 #5:  (rcu_read_lock){......}, at: [<ffffffff8389a633>]
ip_expire+0x1b3/0x6c0 net/ipv4/ip_fragment.c:216
 #6:  (slock-AF_INET){+.-...}, at: [<ffffffff839b3313>] spin_trylock
include/linux/spinlock.h:309 [inline]
 #6:  (slock-AF_INET){+.-...}, at: [<ffffffff839b3313>] icmp_xmit_lock
net/ipv4/icmp.c:219 [inline]
 #6:  (slock-AF_INET){+.-...}, at: [<ffffffff839b3313>]
icmp_send+0x803/0x1c80 net/ipv4/icmp.c:681
 #7:  (rcu_read_lock_bh){......}, at: [<ffffffff838ab9a1>]
ip_finish_output2+0x2c1/0x15a0 net/ipv4/ip_output.c:198
 #8:  (rcu_read_lock_bh){......}, at: [<ffffffff836d1dee>]
__dev_queue_xmit+0x23e/0x1e60 net/core/dev.c:3324
 #9:  (dev->qdisc_running_key ?: &qdisc_running_key){+.....}, at:
[<ffffffff836d3a27>] dev_queue_xmit+0x17/0x20 net/core/dev.c:3423

stack backtrace:
CPU: 0 PID: 12392 Comm: modprobe Not tainted 4.10.0+ #29
Hardware name: Google Google Compute Engine/Google Compute Engine,
BIOS Google 01/01/2011
Call Trace:
 <IRQ>
 __dump_stack lib/dump_stack.c:16 [inline]
 dump_stack+0x2ee/0x3ef lib/dump_stack.c:52
 print_circular_bug+0x307/0x3b0 kernel/locking/lockdep.c:1204
 check_prev_add kernel/locking/lockdep.c:1830 [inline]
 check_prevs_add+0xa8f/0x19f0 kernel/locking/lockdep.c:1940
 validate_chain kernel/locking/lockdep.c:2267 [inline]
 __lock_acquire+0x2149/0x3430 kernel/locking/lockdep.c:3340
 lock_acquire+0x2a1/0x630 kernel/locking/lockdep.c:3755
 __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline]
 _raw_spin_lock+0x33/0x50 kernel/locking/spinlock.c:151
 spin_lock include/linux/spinlock.h:299 [inline]
 __netif_tx_lock include/linux/netdevice.h:3486 [inline]
 sch_direct_xmit+0x282/0x6d0 net/sched/sch_generic.c:180
 __dev_xmit_skb net/core/dev.c:3092 [inline]
 __dev_queue_xmit+0x13e5/0x1e60 net/core/dev.c:3358
 dev_queue_xmit+0x17/0x20 net/core/dev.c:3423
 neigh_hh_output include/net/neighbour.h:468 [inline]
 neigh_output include/net/neighbour.h:476 [inline]
 ip_finish_output2+0xf6c/0x15a0 net/ipv4/ip_output.c:228
 ip_finish_output+0xa29/0xe10 net/ipv4/ip_output.c:316
 NF_HOOK_COND include/linux/netfilter.h:246 [inline]
 ip_output+0x1f0/0x7a0 net/ipv4/ip_output.c:404
 dst_output include/net/dst.h:486 [inline]
 ip_local_out+0x95/0x170 net/ipv4/ip_output.c:124
 ip_send_skb+0x3c/0xc0 net/ipv4/ip_output.c:1492
 ip_push_pending_frames+0x64/0x80 net/ipv4/ip_output.c:1512
 icmp_push_reply+0x372/0x4d0 net/ipv4/icmp.c:394
 icmp_send+0x156c/0x1c80 net/ipv4/icmp.c:754
 ip_expire+0x40e/0x6c0 net/ipv4/ip_fragment.c:239
 call_timer_fn+0x241/0x820 kernel/time/timer.c:1268
 expire_timers kernel/time/timer.c:1307 [inline]
 __run_timers+0x960/0xcf0 kernel/time/timer.c:1601
 run_timer_softirq+0x21/0x80 kernel/time/timer.c:1614
 __do_softirq+0x31f/0xbe7 kernel/softirq.c:284
 invoke_softirq kernel/softirq.c:364 [inline]
 irq_exit+0x1cc/0x200 kernel/softirq.c:405
 exiting_irq arch/x86/include/asm/apic.h:657 [inline]
 smp_apic_timer_interrupt+0x76/0xa0 arch/x86/kernel/apic/apic.c:962
 apic_timer_interrupt+0x93/0xa0 arch/x86/entry/entry_64.S:707
RIP: 0010:__read_once_size include/linux/compiler.h:254 [inline]
RIP: 0010:atomic_read arch/x86/include/asm/atomic.h:26 [inline]
RIP: 0010:rcu_dynticks_curr_cpu_in_eqs kernel/rcu/tree.c:350 [inline]
RIP: 0010:__rcu_is_watching kernel/rcu/tree.c:1133 [inline]
RIP: 0010:rcu_is_watching+0x83/0x110 kernel/rcu/tree.c:1147
RSP: 0000:ffff8801c391f120 EFLAGS: 00000a03 ORIG_RAX: ffffffffffffff10
RAX: dffffc0000000000 RBX: ffff8801c391f148 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 000055edd4374000 RDI: ffff8801dbe1ae0c
RBP: ffff8801c391f1a0 R08: 0000000000000002 R09: 0000000000000000
R10: dffffc0000000000 R11: 0000000000000002 R12: 1ffff10038723e25
R13: ffff8801dbe1ae00 R14: ffff8801c391f680 R15: dffffc0000000000
 </IRQ>
 rcu_read_lock_held+0x87/0xc0 kernel/rcu/update.c:293
 radix_tree_deref_slot include/linux/radix-tree.h:238 [inline]
 filemap_map_pages+0x6d4/0x1570 mm/filemap.c:2335
 do_fault_around mm/memory.c:3231 [inline]
 do_read_fault mm/memory.c:3265 [inline]
 do_fault+0xbd5/0x2080 mm/memory.c:3370
 handle_pte_fault mm/memory.c:3600 [inline]
 __handle_mm_fault+0x1062/0x2cb0 mm/memory.c:3714
 handle_mm_fault+0x1e2/0x480 mm/memory.c:3751
 __do_page_fault+0x4f6/0xb60 arch/x86/mm/fault.c:1397
 do_page_fault+0x54/0x70 arch/x86/mm/fault.c:1460
 page_fault+0x28/0x30 arch/x86/entry/entry_64.S:1011
RIP: 0033:0x7f83172f2786
RSP: 002b:00007fffe859ae80 EFLAGS: 00010293
RAX: 000055edd4373040 RBX: 00007f83175111c8 RCX: 000055edd4373238
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00007f8317510970
RBP: 00007fffe859afd0 R08: 0000000000000009 R09: 0000000000000000
R10: 0000000000000064 R11: 0000000000000000 R12: 000055edd4373040
R13: 0000000000000000 R14: 00007fffe859afe8 R15: 0000000000000000

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ayufan pushed a commit that referenced this pull request Jun 14, 2018
@gregkh
scsi: libiscsi: Allow sd_shutdown on bad transport
6294172 
[ Upstream commit d754941 ]

If, for any reason, userland shuts down iscsi transport interfaces
before proper logouts - like when logging in to LUNs manually, without
logging out on server shutdown, or when automated scripts can't
umount/logout from logged LUNs - kernel will hang forever on its
sd_sync_cache() logic, after issuing the SYNCHRONIZE_CACHE cmd to all
still existent paths.

PID: 1 TASK: ffff8801a69b8000 CPU: 1 COMMAND: "systemd-shutdow"
 #0 [ffff8801a69c3a30] __schedule at ffffffff8183e9ee
 #1 [ffff8801a69c3a80] schedule at ffffffff8183f0d5
 #2 [ffff8801a69c3a98] schedule_timeout at ffffffff81842199
 #3 [ffff8801a69c3b40] io_schedule_timeout at ffffffff8183e604
 #4 [ffff8801a69c3b70] wait_for_completion_io_timeout at ffffffff8183fc6c
 #5 [ffff8801a69c3bd0] blk_execute_rq at ffffffff813cfe10
 #6 [ffff8801a69c3c88] scsi_execute at ffffffff815c3fc7
 #7 [ffff8801a69c3cc8] scsi_execute_req_flags at ffffffff815c60fe
 #8 [ffff8801a69c3d30] sd_sync_cache at ffffffff815d37d7
 #9 [ffff8801a69c3da8] sd_shutdown at ffffffff815d3c3c

This happens because iscsi_eh_cmd_timed_out(), the transport layer
timeout helper, would tell the queue timeout function (scsi_times_out)
to reset the request timer over and over, until the session state is
back to logged in state. Unfortunately, during server shutdown, this
might never happen again.

Other option would be "not to handle" the issue in the transport
layer. That would trigger the error handler logic, which would also need
the session state to be logged in again.

Best option, for such case, is to tell upper layers that the command was
handled during the transport layer error handler helper, marking it as
DID_NO_CONNECT, which will allow completion and inform about the
problem.

After the session was marked as ISCSI_STATE_FAILED, due to the first
timeout during the server shutdown phase, all subsequent cmds will fail
to be queued, allowing upper logic to fail faster.

Signed-off-by: Rafael David Tinoco <rafael.tinoco@canonical.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ayufan pushed a commit that referenced this pull request Aug 9, 2018
@gregkh
RDS: IB: Fix null pointer issue
c9eb334 
[ Upstream commit 2c0aa08 ]

Scenario:
1. Port down and do fail over
2. Ap do rds_bind syscall

PID: 47039  TASK: ffff89887e2fe640  CPU: 47  COMMAND: "kworker/u:6"
 #0 [ffff898e35f159f0] machine_kexec at ffffffff8103abf9
 #1 [ffff898e35f15a60] crash_kexec at ffffffff810b96e3
 #2 [ffff898e35f15b30] oops_end at ffffffff8150f518
 #3 [ffff898e35f15b60] no_context at ffffffff8104854c
 #4 [ffff898e35f15ba0] __bad_area_nosemaphore at ffffffff81048675
 #5 [ffff898e35f15bf0] bad_area_nosemaphore at ffffffff810487d3
 #6 [ffff898e35f15c00] do_page_fault at ffffffff815120b8
 #7 [ffff898e35f15d10] page_fault at ffffffff8150ea95
    [exception RIP: unknown or invalid address]
    RIP: 0000000000000000  RSP: ffff898e35f15dc8  RFLAGS: 00010282
    RAX: 00000000fffffffe  RBX: ffff889b77f6fc00  RCX:ffffffff81c99d88
    RDX: 0000000000000000  RSI: ffff896019ee08e8  RDI:ffff889b77f6fc00
    RBP: ffff898e35f15df0   R8: ffff896019ee08c8  R9:0000000000000000
    R10: 0000000000000400  R11: 0000000000000000  R12:ffff896019ee08c0
    R13: ffff889b77f6fe68  R14: ffffffff81c99d80  R15: ffffffffa022a1e0
    ORIG_RAX: ffffffffffffffff  CS: 0010 SS: 0018
 #8 [ffff898e35f15dc8] cma_ndev_work_handler at ffffffffa022a228 [rdma_cm]
 #9 [ffff898e35f15df8] process_one_work at ffffffff8108a7c6
 #10 [ffff898e35f15e58] worker_thread at ffffffff8108bda0
 #11 [ffff898e35f15ee8] kthread at ffffffff81090fe6

PID: 45659  TASK: ffff880d313d2500  CPU: 31  COMMAND: "oracle_45659_ap"
 #0 [ffff881024ccfc98] __schedule at ffffffff8150bac4
 #1 [ffff881024ccfd40] schedule at ffffffff8150c2cf
 #2 [ffff881024ccfd50] __mutex_lock_slowpath at ffffffff8150cee7
 #3 [ffff881024ccfdc0] mutex_lock at ffffffff8150cdeb
 #4 [ffff881024ccfde0] rdma_destroy_id at ffffffffa022a027 [rdma_cm]
 #5 [ffff881024ccfe10] rds_ib_laddr_check at ffffffffa0357857 [rds_rdma]
 #6 [ffff881024ccfe50] rds_trans_get_preferred at ffffffffa0324c2a [rds]
 #7 [ffff881024ccfe80] rds_bind at ffffffffa031d690 [rds]
 #8 [ffff881024ccfeb0] sys_bind at ffffffff8142a670

PID: 45659                          PID: 47039
rds_ib_laddr_check
  /* create id_priv with a null event_handler */
  rdma_create_id
  rdma_bind_addr
    cma_acquire_dev
      /* add id_priv to cma_dev->id_list */
      cma_attach_to_dev
                                    cma_ndev_work_handler
                                      /* event_hanlder is null */
                                      id_priv->id.event_handler

Signed-off-by: Guanglei Li <guanglei.li@oracle.com>
Signed-off-by: Honglei Wang <honglei.wang@oracle.com>
Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Yanjun Zhu <yanjun.zhu@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Acked-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ayufan pushed a commit that referenced this pull request Aug 9, 2018
@maurizio-lombardi @gregkh
cdrom: do not call check_disk_change() inside cdrom_open()
5e69983 
[ Upstream commit 2bbea6e ]

when mounting an ISO filesystem sometimes (very rarely)
the system hangs because of a race condition between two tasks.

PID: 6766   TASK: ffff88007b2a6dd0  CPU: 0   COMMAND: "mount"
 #0 [ffff880078447ae0] __schedule at ffffffff8168d605
 #1 [ffff880078447b48] schedule_preempt_disabled at ffffffff8168ed49
 #2 [ffff880078447b58] __mutex_lock_slowpath at ffffffff8168c995
 #3 [ffff880078447bb8] mutex_lock at ffffffff8168bdef
 #4 [ffff880078447bd0] sr_block_ioctl at ffffffffa00b6818 [sr_mod]
 #5 [ffff880078447c10] blkdev_ioctl at ffffffff812fea50
 #6 [ffff880078447c70] ioctl_by_bdev at ffffffff8123a8b3
 #7 [ffff880078447c90] isofs_fill_super at ffffffffa04fb1e1 [isofs]
 #8 [ffff880078447da8] mount_bdev at ffffffff81202570
 #9 [ffff880078447e18] isofs_mount at ffffffffa04f9828 [isofs]
#10 [ffff880078447e28] mount_fs at ffffffff81202d09
#11 [ffff880078447e70] vfs_kern_mount at ffffffff8121ea8f
#12 [ffff880078447ea8] do_mount at ffffffff81220fee
#13 [ffff880078447f28] sys_mount at ffffffff812218d6
#14 [ffff880078447f80] system_call_fastpath at ffffffff81698c49
    RIP: 00007fd9ea914e9a  RSP: 00007ffd5d9bf648  RFLAGS: 00010246
    RAX: 00000000000000a5  RBX: ffffffff81698c49  RCX: 0000000000000010
    RDX: 00007fd9ec2bc210  RSI: 00007fd9ec2bc290  RDI: 00007fd9ec2bcf30
    RBP: 0000000000000000   R8: 0000000000000000   R9: 0000000000000010
    R10: 00000000c0ed0001  R11: 0000000000000206  R12: 00007fd9ec2bc040
    R13: 00007fd9eb6b2380  R14: 00007fd9ec2bc210  R15: 00007fd9ec2bcf30
    ORIG_RAX: 00000000000000a5  CS: 0033  SS: 002b

This task was trying to mount the cdrom.  It allocated and configured a
super_block struct and owned the write-lock for the super_block->s_umount
rwsem. While exclusively owning the s_umount lock, it called
sr_block_ioctl and waited to acquire the global sr_mutex lock.

PID: 6785   TASK: ffff880078720fb0  CPU: 0   COMMAND: "systemd-udevd"
 #0 [ffff880078417898] __schedule at ffffffff8168d605
 #1 [ffff880078417900] schedule at ffffffff8168dc59
 #2 [ffff880078417910] rwsem_down_read_failed at ffffffff8168f605
 #3 [ffff880078417980] call_rwsem_down_read_failed at ffffffff81328838
 #4 [ffff8800784179d0] down_read at ffffffff8168cde0
 #5 [ffff8800784179e8] get_super at ffffffff81201cc7
 #6 [ffff880078417a10] __invalidate_device at ffffffff8123a8de
 #7 [ffff880078417a40] flush_disk at ffffffff8123a94b
 #8 [ffff880078417a88] check_disk_change at ffffffff8123ab50
 #9 [ffff880078417ab0] cdrom_open at ffffffffa00a29e1 [cdrom]
#10 [ffff880078417b68] sr_block_open at ffffffffa00b6f9b [sr_mod]
#11 [ffff880078417b98] __blkdev_get at ffffffff8123ba86
#12 [ffff880078417bf0] blkdev_get at ffffffff8123bd65
#13 [ffff880078417c78] blkdev_open at ffffffff8123bf9b
#14 [ffff880078417c90] do_dentry_open at ffffffff811fc7f7
#15 [ffff880078417cd8] vfs_open at ffffffff811fc9cf
#16 [ffff880078417d00] do_last at ffffffff8120d53d
#17 [ffff880078417db0] path_openat at ffffffff8120e6b2
#18 [ffff880078417e48] do_filp_open at ffffffff8121082b
#19 [ffff880078417f18] do_sys_open at ffffffff811fdd33
#20 [ffff880078417f70] sys_open at ffffffff811fde4e
#21 [ffff880078417f80] system_call_fastpath at ffffffff81698c49
    RIP: 00007f29438b0c20  RSP: 00007ffc76624b78  RFLAGS: 00010246
    RAX: 0000000000000002  RBX: ffffffff81698c49  RCX: 0000000000000000
    RDX: 00007f2944a5fa70  RSI: 00000000000a0800  RDI: 00007f2944a5fa70
    RBP: 00007f2944a5f540   R8: 0000000000000000   R9: 0000000000000020
    R10: 00007f2943614c40  R11: 0000000000000246  R12: ffffffff811fde4e
    R13: ffff880078417f78  R14: 000000000000000c  R15: 00007f2944a4b010
    ORIG_RAX: 0000000000000002  CS: 0033  SS: 002b

This task tried to open the cdrom device, the sr_block_open function
acquired the global sr_mutex lock. The call to check_disk_change()
then saw an event flag indicating a possible media change and tried
to flush any cached data for the device.
As part of the flush, it tried to acquire the super_block->s_umount
lock associated with the cdrom device.
This was the same super_block as created and locked by the previous task.

The first task acquires the s_umount lock and then the sr_mutex_lock;
the second task acquires the sr_mutex_lock and then the s_umount lock.

This patch fixes the issue by moving check_disk_change() out of
cdrom_open() and let the caller take care of it.

Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ayufan pushed a commit that referenced this pull request Sep 29, 2018
@ZhengShunQian
RDS: IB: Fix null pointer issue
bc22b05 
[ Upstream commit 2c0aa08 ]

Scenario:
1. Port down and do fail over
2. Ap do rds_bind syscall

PID: 47039  TASK: ffff89887e2fe640  CPU: 47  COMMAND: "kworker/u:6"
 #0 [ffff898e35f159f0] machine_kexec at ffffffff8103abf9
 #1 [ffff898e35f15a60] crash_kexec at ffffffff810b96e3
 #2 [ffff898e35f15b30] oops_end at ffffffff8150f518
 #3 [ffff898e35f15b60] no_context at ffffffff8104854c
 #4 [ffff898e35f15ba0] __bad_area_nosemaphore at ffffffff81048675
 #5 [ffff898e35f15bf0] bad_area_nosemaphore at ffffffff810487d3
 #6 [ffff898e35f15c00] do_page_fault at ffffffff815120b8
 #7 [ffff898e35f15d10] page_fault at ffffffff8150ea95
    [exception RIP: unknown or invalid address]
    RIP: 0000000000000000  RSP: ffff898e35f15dc8  RFLAGS: 00010282
    RAX: 00000000fffffffe  RBX: ffff889b77f6fc00  RCX:ffffffff81c99d88
    RDX: 0000000000000000  RSI: ffff896019ee08e8  RDI:ffff889b77f6fc00
    RBP: ffff898e35f15df0   R8: ffff896019ee08c8  R9:0000000000000000
    R10: 0000000000000400  R11: 0000000000000000  R12:ffff896019ee08c0
    R13: ffff889b77f6fe68  R14: ffffffff81c99d80  R15: ffffffffa022a1e0
    ORIG_RAX: ffffffffffffffff  CS: 0010 SS: 0018
 #8 [ffff898e35f15dc8] cma_ndev_work_handler at ffffffffa022a228 [rdma_cm]
 #9 [ffff898e35f15df8] process_one_work at ffffffff8108a7c6
 #10 [ffff898e35f15e58] worker_thread at ffffffff8108bda0
 #11 [ffff898e35f15ee8] kthread at ffffffff81090fe6

PID: 45659  TASK: ffff880d313d2500  CPU: 31  COMMAND: "oracle_45659_ap"
 #0 [ffff881024ccfc98] __schedule at ffffffff8150bac4
 #1 [ffff881024ccfd40] schedule at ffffffff8150c2cf
 #2 [ffff881024ccfd50] __mutex_lock_slowpath at ffffffff8150cee7
 #3 [ffff881024ccfdc0] mutex_lock at ffffffff8150cdeb
 #4 [ffff881024ccfde0] rdma_destroy_id at ffffffffa022a027 [rdma_cm]
 #5 [ffff881024ccfe10] rds_ib_laddr_check at ffffffffa0357857 [rds_rdma]
 #6 [ffff881024ccfe50] rds_trans_get_preferred at ffffffffa0324c2a [rds]
 #7 [ffff881024ccfe80] rds_bind at ffffffffa031d690 [rds]
 #8 [ffff881024ccfeb0] sys_bind at ffffffff8142a670

PID: 45659                          PID: 47039
rds_ib_laddr_check
  /* create id_priv with a null event_handler */
  rdma_create_id
  rdma_bind_addr
    cma_acquire_dev
      /* add id_priv to cma_dev->id_list */
      cma_attach_to_dev
                                    cma_ndev_work_handler
                                      /* event_hanlder is null */
                                      id_priv->id.event_handler

Signed-off-by: Guanglei Li <guanglei.li@oracle.com>
Signed-off-by: Honglei Wang <honglei.wang@oracle.com>
Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Yanjun Zhu <yanjun.zhu@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Acked-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ayufan pushed a commit that referenced this pull request Sep 29, 2018
@maurizio-lombardi @ZhengShunQian
cdrom: do not call check_disk_change() inside cdrom_open()
68c8a84 
[ Upstream commit 2bbea6e ]

when mounting an ISO filesystem sometimes (very rarely)
the system hangs because of a race condition between two tasks.

PID: 6766   TASK: ffff88007b2a6dd0  CPU: 0   COMMAND: "mount"
 #0 [ffff880078447ae0] __schedule at ffffffff8168d605
 #1 [ffff880078447b48] schedule_preempt_disabled at ffffffff8168ed49
 #2 [ffff880078447b58] __mutex_lock_slowpath at ffffffff8168c995
 #3 [ffff880078447bb8] mutex_lock at ffffffff8168bdef
 #4 [ffff880078447bd0] sr_block_ioctl at ffffffffa00b6818 [sr_mod]
 #5 [ffff880078447c10] blkdev_ioctl at ffffffff812fea50
 #6 [ffff880078447c70] ioctl_by_bdev at ffffffff8123a8b3
 #7 [ffff880078447c90] isofs_fill_super at ffffffffa04fb1e1 [isofs]
 #8 [ffff880078447da8] mount_bdev at ffffffff81202570
 #9 [ffff880078447e18] isofs_mount at ffffffffa04f9828 [isofs]
#10 [ffff880078447e28] mount_fs at ffffffff81202d09
#11 [ffff880078447e70] vfs_kern_mount at ffffffff8121ea8f
#12 [ffff880078447ea8] do_mount at ffffffff81220fee
#13 [ffff880078447f28] sys_mount at ffffffff812218d6
#14 [ffff880078447f80] system_call_fastpath at ffffffff81698c49
    RIP: 00007fd9ea914e9a  RSP: 00007ffd5d9bf648  RFLAGS: 00010246
    RAX: 00000000000000a5  RBX: ffffffff81698c49  RCX: 0000000000000010
    RDX: 00007fd9ec2bc210  RSI: 00007fd9ec2bc290  RDI: 00007fd9ec2bcf30
    RBP: 0000000000000000   R8: 0000000000000000   R9: 0000000000000010
    R10: 00000000c0ed0001  R11: 0000000000000206  R12: 00007fd9ec2bc040
    R13: 00007fd9eb6b2380  R14: 00007fd9ec2bc210  R15: 00007fd9ec2bcf30
    ORIG_RAX: 00000000000000a5  CS: 0033  SS: 002b

This task was trying to mount the cdrom.  It allocated and configured a
super_block struct and owned the write-lock for the super_block->s_umount
rwsem. While exclusively owning the s_umount lock, it called
sr_block_ioctl and waited to acquire the global sr_mutex lock.

PID: 6785   TASK: ffff880078720fb0  CPU: 0   COMMAND: "systemd-udevd"
 #0 [ffff880078417898] __schedule at ffffffff8168d605
 #1 [ffff880078417900] schedule at ffffffff8168dc59
 #2 [ffff880078417910] rwsem_down_read_failed at ffffffff8168f605
 #3 [ffff880078417980] call_rwsem_down_read_failed at ffffffff81328838
 #4 [ffff8800784179d0] down_read at ffffffff8168cde0
 #5 [ffff8800784179e8] get_super at ffffffff81201cc7
 #6 [ffff880078417a10] __invalidate_device at ffffffff8123a8de
 #7 [ffff880078417a40] flush_disk at ffffffff8123a94b
 #8 [ffff880078417a88] check_disk_change at ffffffff8123ab50
 #9 [ffff880078417ab0] cdrom_open at ffffffffa00a29e1 [cdrom]
#10 [ffff880078417b68] sr_block_open at ffffffffa00b6f9b [sr_mod]
#11 [ffff880078417b98] __blkdev_get at ffffffff8123ba86
#12 [ffff880078417bf0] blkdev_get at ffffffff8123bd65
#13 [ffff880078417c78] blkdev_open at ffffffff8123bf9b
#14 [ffff880078417c90] do_dentry_open at ffffffff811fc7f7
#15 [ffff880078417cd8] vfs_open at ffffffff811fc9cf
#16 [ffff880078417d00] do_last at ffffffff8120d53d
#17 [ffff880078417db0] path_openat at ffffffff8120e6b2
#18 [ffff880078417e48] do_filp_open at ffffffff8121082b
#19 [ffff880078417f18] do_sys_open at ffffffff811fdd33
#20 [ffff880078417f70] sys_open at ffffffff811fde4e
#21 [ffff880078417f80] system_call_fastpath at ffffffff81698c49
    RIP: 00007f29438b0c20  RSP: 00007ffc76624b78  RFLAGS: 00010246
    RAX: 0000000000000002  RBX: ffffffff81698c49  RCX: 0000000000000000
    RDX: 00007f2944a5fa70  RSI: 00000000000a0800  RDI: 00007f2944a5fa70
    RBP: 00007f2944a5f540   R8: 0000000000000000   R9: 0000000000000020
    R10: 00007f2943614c40  R11: 0000000000000246  R12: ffffffff811fde4e
    R13: ffff880078417f78  R14: 000000000000000c  R15: 00007f2944a4b010
    ORIG_RAX: 0000000000000002  CS: 0033  SS: 002b

This task tried to open the cdrom device, the sr_block_open function
acquired the global sr_mutex lock. The call to check_disk_change()
then saw an event flag indicating a possible media change and tried
to flush any cached data for the device.
As part of the flush, it tried to acquire the super_block->s_umount
lock associated with the cdrom device.
This was the same super_block as created and locked by the previous task.

The first task acquires the s_umount lock and then the sr_mutex_lock;
the second task acquires the sr_mutex_lock and then the s_umount lock.

This patch fixes the issue by moving check_disk_change() out of
cdrom_open() and let the caller take care of it.

Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ayufan pushed a commit that referenced this pull request Sep 29, 2018
@ZhengShunQian
virtio_balloon: fix another race between migration and ballooning
cbbfcbd 
commit 89da619 upstream.

Kernel panic when with high memory pressure, calltrace looks like,

PID: 21439 TASK: ffff881be3afedd0 CPU: 16 COMMAND: "java"
 #0 [ffff881ec7ed7630] machine_kexec at ffffffff81059beb
 #1 [ffff881ec7ed7690] __crash_kexec at ffffffff81105942
 #2 [ffff881ec7ed7760] crash_kexec at ffffffff81105a30
 #3 [ffff881ec7ed7778] oops_end at ffffffff816902c8
 #4 [ffff881ec7ed77a0] no_context at ffffffff8167ff46
 #5 [ffff881ec7ed77f0] __bad_area_nosemaphore at ffffffff8167ffdc
 #6 [ffff881ec7ed7838] __node_set at ffffffff81680300
 #7 [ffff881ec7ed7860] __do_page_fault at ffffffff8169320f
 #8 [ffff881ec7ed78c0] do_page_fault at ffffffff816932b5
 #9 [ffff881ec7ed78f0] page_fault at ffffffff8168f4c8
    [exception RIP: _raw_spin_lock_irqsave+47]
    RIP: ffffffff8168edef RSP: ffff881ec7ed79a8 RFLAGS: 00010046
    RAX: 0000000000000246 RBX: ffffea0019740d00 RCX: ffff881ec7ed7fd8
    RDX: 0000000000020000 RSI: 0000000000000016 RDI: 0000000000000008
    RBP: ffff881ec7ed79a8 R8: 0000000000000246 R9: 000000000001a098
    R10: ffff88107ffda000 R11: 0000000000000000 R12: 0000000000000000
    R13: 0000000000000008 R14: ffff881ec7ed7a80 R15: ffff881be3afedd0
    ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018

It happens in the pagefault and results in double pagefault
during compacting pages when memory allocation fails.

Analysed the vmcore, the page leads to second pagefault is corrupted
with _mapcount=-256, but private=0.

It's caused by the race between migration and ballooning, and lock
missing in virtballoon_migratepage() of virtio_balloon driver.
This patch fix the bug.

Fixes: e225042 ("virtio_balloon: introduce migration primitives to balloon pages")
Cc: stable@vger.kernel.org
Signed-off-by: Jiang Biao <jiang.biao2@zte.com.cn>
Signed-off-by: Huang Chong <huang.chong@zte.com.cn>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ayufan pushed a commit that referenced this pull request Sep 29, 2018
@kiran-modukuri @ZhengShunQian
cachefiles: Fix refcounting bug in backing-file read monitoring
dd390e8 
[ Upstream commit 934140a ]

cachefiles_read_waiter() has the right to access a 'monitor' object by
virtue of being called under the waitqueue lock for one of the pages in its
purview.  However, it has no ref on that monitor object or on the
associated operation.

What it is allowed to do is to move the monitor object to the operation's
to_do list, but once it drops the work_lock, it's actually no longer
permitted to access that object.  However, it is trying to enqueue the
retrieval operation for processing - but it can only do this via a pointer
in the monitor object, something it shouldn't be doing.

If it doesn't enqueue the operation, the operation may not get processed.
If the order is flipped so that the enqueue is first, then it's possible
for the work processor to look at the to_do list before the monitor is
enqueued upon it.

Fix this by getting a ref on the operation so that we can trust that it
will still be there once we've added the monitor to the to_do list and
dropped the work_lock.  The op can then be enqueued after the lock is
dropped.

The bug can manifest in one of a couple of ways.  The first manifestation
looks like:

 FS-Cache:
 FS-Cache: Assertion failed
 FS-Cache: 6 == 5 is false
 ------------[ cut here ]------------
 kernel BUG at fs/fscache/operation.c:494!
 RIP: 0010:fscache_put_operation+0x1e3/0x1f0
 ...
 fscache_op_work_func+0x26/0x50
 process_one_work+0x131/0x290
 worker_thread+0x45/0x360
 kthread+0xf8/0x130
 ? create_worker+0x190/0x190
 ? kthread_cancel_work_sync+0x10/0x10
 ret_from_fork+0x1f/0x30

This is due to the operation being in the DEAD state (6) rather than
INITIALISED, COMPLETE or CANCELLED (5) because it's already passed through
fscache_put_operation().

The bug can also manifest like the following:

 kernel BUG at fs/fscache/operation.c:69!
 ...
    [exception RIP: fscache_enqueue_operation+246]
 ...
 #7 [ffff883fff083c10] fscache_enqueue_operation at ffffffffa0b793c6
 #8 [ffff883fff083c28] cachefiles_read_waiter at ffffffffa0b15a48
 #9 [ffff883fff083c48] __wake_up_common at ffffffff810af028

I'm not entirely certain as to which is line 69 in Lei's kernel, so I'm not
entirely clear which assertion failed.

Fixes: 9ae326a ("CacheFiles: A cache that backs onto a mounted filesystem")
Reported-by: Lei Xue <carmark.dlut@gmail.com>
Reported-by: Vegard Nossum <vegard.nossum@gmail.com>
Reported-by: Anthony DeRobertis <aderobertis@metrics.net>
Reported-by: NeilBrown <neilb@suse.com>
Reported-by: Daniel Axtens <dja@axtens.net>
Reported-by: Kiran Kumar Modukuri <kiran.modukuri@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
scpcom pushed a commit to scpcom/linux that referenced this pull request Apr 16, 2020
@srikard @gregkh
perf stat: Fix a segmentation fault when using repeat forever
0f714ca 
[ Upstream commit 443f2d5 ]

Observe a segmentation fault when 'perf stat' is asked to repeat forever
with the interval option.

Without fix:

  # perf stat -r 0 -I 5000 -e cycles -a sleep 10
  #           time             counts unit events
       5.000211692  3,13,89,82,34,157      cycles
      10.000380119  1,53,98,52,22,294      cycles
      10.040467280       17,16,79,265      cycles
  Segmentation fault

This problem was only observed when we use forever option aka -r 0 and
works with limited repeats. Calling print_counter with ts being set to
NULL, is not a correct option when interval is set. Hence avoid
print_counter(NULL,..)  if interval is set.

With fix:

  # perf stat -r 0 -I 5000 -e cycles -a sleep 10
   #           time             counts unit events
       5.019866622  3,15,14,43,08,697      cycles
      10.039865756  3,15,16,31,95,261      cycles
      10.059950628     1,26,05,47,158      cycles
       5.009902655  3,14,52,62,33,932      cycles
      10.019880228  3,14,52,22,89,154      cycles
      10.030543876       66,90,18,333      cycles
       5.009848281  3,14,51,98,25,437      cycles
      10.029854402  3,15,14,93,04,918      cycles
       5.009834177  3,14,51,95,92,316      cycles

Committer notes:

Did the 'git bisect' to find the cset introducing the problem to add the
Fixes tag below, and at that time the problem reproduced as:

  (gdb) run stat -r0 -I500 sleep 1
  <SNIP>
  Program received signal SIGSEGV, Segmentation fault.
  print_interval (prefix=prefix@entry=0x7fffffffc8d0 "", ts=ts@entry=0x0) at builtin-stat.c:866
  866		sprintf(prefix, "%6lu.%09lu%s", ts->tv_sec, ts->tv_nsec, csv_sep);
  (gdb) bt
  #0  print_interval (prefix=prefix@entry=0x7fffffffc8d0 "", ts=ts@entry=0x0) at builtin-stat.c:866
  #1  0x000000000041860a in print_counters (ts=ts@entry=0x0, argc=argc@entry=2, argv=argv@entry=0x7fffffffd640) at builtin-stat.c:938
  #2  0x0000000000419a7f in cmd_stat (argc=2, argv=0x7fffffffd640, prefix=<optimized out>) at builtin-stat.c:1411
  #3  0x000000000045c65a in run_builtin (p=p@entry=0x6291b8 <commands+216>, argc=argc@entry=5, argv=argv@entry=0x7fffffffd640) at perf.c:370
  #4  0x000000000045c893 in handle_internal_command (argc=5, argv=0x7fffffffd640) at perf.c:429
  #5  0x000000000045c8f1 in run_argv (argcp=argcp@entry=0x7fffffffd4ac, argv=argv@entry=0x7fffffffd4a0) at perf.c:473
  #6  0x000000000045cac9 in main (argc=<optimized out>, argv=<optimized out>) at perf.c:588
  (gdb)

Mostly the same as just before this patch:

  Program received signal SIGSEGV, Segmentation fault.
  0x00000000005874a7 in print_interval (config=0xa1f2a0 <stat_config>, evlist=0xbc9b90, prefix=0x7fffffffd1c0 "`", ts=0x0) at util/stat-display.c:964
  964		sprintf(prefix, "%6lu.%09lu%s", ts->tv_sec, ts->tv_nsec, config->csv_sep);
  (gdb) bt
  #0  0x00000000005874a7 in print_interval (config=0xa1f2a0 <stat_config>, evlist=0xbc9b90, prefix=0x7fffffffd1c0 "`", ts=0x0) at util/stat-display.c:964
  #1  0x0000000000588047 in perf_evlist__print_counters (evlist=0xbc9b90, config=0xa1f2a0 <stat_config>, _target=0xa1f0c0 <target>, ts=0x0, argc=2, argv=0x7fffffffd670)
      at util/stat-display.c:1172
  #2  0x000000000045390f in print_counters (ts=0x0, argc=2, argv=0x7fffffffd670) at builtin-stat.c:656
  #3  0x0000000000456bb5 in cmd_stat (argc=2, argv=0x7fffffffd670) at builtin-stat.c:1960
  #4  0x00000000004dd2e0 in run_builtin (p=0xa30e00 <commands+288>, argc=5, argv=0x7fffffffd670) at perf.c:310
  #5  0x00000000004dd54d in handle_internal_command (argc=5, argv=0x7fffffffd670) at perf.c:362
  #6  0x00000000004dd694 in run_argv (argcp=0x7fffffffd4cc, argv=0x7fffffffd4c0) at perf.c:406
  ayufan-rock64#7  0x00000000004dda11 in main (argc=5, argv=0x7fffffffd670) at perf.c:531
  (gdb)

Fixes: d4f63a4 ("perf stat: Introduce print_counters function")
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org # v4.2+
Link: http://lore.kernel.org/lkml/20190904094738.9558-3-srikar@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
scpcom pushed a commit to scpcom/linux that referenced this pull request Apr 16, 2020
@josefbacik @gregkh
btrfs: flush write bio if we loop in extent_write_cache_pages
380a82b 
[ Upstream commit 42ffb0b ]

There exists a deadlock with range_cyclic that has existed forever.  If
we loop around with a bio already built we could deadlock with a writer
who has the page locked that we're attempting to write but is waiting on
a page in our bio to be written out.  The task traces are as follows

  PID: 1329874  TASK: ffff889ebcdf3800  CPU: 33  COMMAND: "kworker/u113:5"
   #0 [ffffc900297bb658] __schedule at ffffffff81a4c33f
   #1 [ffffc900297bb6e0] schedule at ffffffff81a4c6e3
   #2 [ffffc900297bb6f8] io_schedule at ffffffff81a4ca42
   #3 [ffffc900297bb708] __lock_page at ffffffff811f145b
   #4 [ffffc900297bb798] __process_pages_contig at ffffffff814bc502
   #5 [ffffc900297bb8c8] lock_delalloc_pages at ffffffff814bc684
   #6 [ffffc900297bb900] find_lock_delalloc_range at ffffffff814be9ff
   ayufan-rock64#7 [ffffc900297bb9a0] writepage_delalloc at ffffffff814bebd0
   ayufan-rock64#8 [ffffc900297bba18] __extent_writepage at ffffffff814bfbf2
   ayufan-rock64#9 [ffffc900297bba98] extent_write_cache_pages at ffffffff814bffbd

  PID: 2167901  TASK: ffff889dc6a59c00  CPU: 14  COMMAND:
  "aio-dio-invalid"
   #0 [ffffc9003b50bb18] __schedule at ffffffff81a4c33f
   #1 [ffffc9003b50bba0] schedule at ffffffff81a4c6e3
   #2 [ffffc9003b50bbb8] io_schedule at ffffffff81a4ca42
   #3 [ffffc9003b50bbc8] wait_on_page_bit at ffffffff811f24d6
   #4 [ffffc9003b50bc60] prepare_pages at ffffffff814b05a7
   #5 [ffffc9003b50bcd8] btrfs_buffered_write at ffffffff814b1359
   #6 [ffffc9003b50bdb0] btrfs_file_write_iter at ffffffff814b5933
   ayufan-rock64#7 [ffffc9003b50be38] new_sync_write at ffffffff8128f6a8
   ayufan-rock64#8 [ffffc9003b50bec8] vfs_write at ffffffff81292b9d
   ayufan-rock64#9 [ffffc9003b50bf00] ksys_pwrite64 at ffffffff81293032

I used drgn to find the respective pages we were stuck on

page_entry.page 0xffffea00fbfc7500 index 8148 bit 15 pid 2167901
page_entry.page 0xffffea00f9bb7400 index 7680 bit 0 pid 1329874

As you can see the kworker is waiting for bit 0 (PG_locked) on index
7680, and aio-dio-invalid is waiting for bit 15 (PG_writeback) on index
8148.  aio-dio-invalid has 7680, and the kworker epd looks like the
following

  crash> struct extent_page_data ffffc900297bbbb0
  struct extent_page_data {
    bio = 0xffff889f747ed830,
    tree = 0xffff889eed6ba448,
    extent_locked = 0,
    sync_io = 0
  }

Probably worth mentioning as well that it waits for writeback of the
page to complete while holding a lock on it (at prepare_pages()).

Using drgn I walked the bio pages looking for page
0xffffea00fbfc7500 which is the one we're waiting for writeback on

  bio = Object(prog, 'struct bio', address=0xffff889f747ed830)
  for i in range(0, bio.bi_vcnt.value_()):
      bv = bio.bi_io_vec[i]
      if bv.bv_page.value_() == 0xffffea00fbfc7500:
	  print("FOUND IT")

which validated what I suspected.

The fix for this is simple, flush the epd before we loop back around to
the beginning of the file during writeout.

Fixes: b293f02 ("Btrfs: Add writepages support")
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
scpcom pushed a commit to scpcom/linux that referenced this pull request Apr 16, 2020
@dankamongmen @gregkh
scsi: iscsi: Don't destroy session if there are outstanding connections
e9f0fc0 
[ Upstream commit 54155ed ]

A faulty userspace that calls destroy_session() before destroying the
connections can trigger the failure.  This patch prevents the issue by
refusing to destroy the session if there are outstanding connections.

------------[ cut here ]------------
kernel BUG at mm/slub.c:306!
invalid opcode: 0000 [#1] SMP PTI
CPU: 1 PID: 1224 Comm: iscsid Not tainted 5.4.0-rc2.iscsi+ ayufan-rock64#7
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
RIP: 0010:__slab_free+0x181/0x350
[...]
[ 1209.686056] RSP: 0018:ffffa93d4074fae0 EFLAGS: 00010246
[ 1209.686694] RAX: ffff934efa5ad800 RBX: 000000008010000a RCX: ffff934efa5ad800
[ 1209.687651] RDX: ffff934efa5ad800 RSI: ffffeb4041e96b00 RDI: ffff934efd402c40
[ 1209.688582] RBP: ffffa93d4074fb80 R08: 0000000000000001 R09: ffffffffbb5dfa26
[ 1209.689425] R10: ffff934efa5ad800 R11: 0000000000000001 R12: ffffeb4041e96b00
[ 1209.690285] R13: ffff934efa5ad800 R14: ffff934efd402c40 R15: 0000000000000000
[ 1209.691213] FS:  00007f7945dfb540(0000) GS:ffff934efda80000(0000) knlGS:0000000000000000
[ 1209.692316] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1209.693013] CR2: 000055877fd3da80 CR3: 0000000077384000 CR4: 00000000000006e0
[ 1209.693897] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1209.694773] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 1209.695631] Call Trace:
[ 1209.695957]  ? __wake_up_common_lock+0x8a/0xc0
[ 1209.696712]  iscsi_pool_free+0x26/0x40
[ 1209.697263]  iscsi_session_teardown+0x2f/0xf0
[ 1209.698117]  iscsi_sw_tcp_session_destroy+0x45/0x60
[ 1209.698831]  iscsi_if_rx+0xd88/0x14e0
[ 1209.699370]  netlink_unicast+0x16f/0x200
[ 1209.699932]  netlink_sendmsg+0x21a/0x3e0
[ 1209.700446]  sock_sendmsg+0x4f/0x60
[ 1209.700902]  ___sys_sendmsg+0x2ae/0x320
[ 1209.701451]  ? cp_new_stat+0x150/0x180
[ 1209.701922]  __sys_sendmsg+0x59/0xa0
[ 1209.702357]  do_syscall_64+0x52/0x160
[ 1209.702812]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 1209.703419] RIP: 0033:0x7f7946433914
[...]
[ 1209.706084] RSP: 002b:00007fffb99f2378 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
[ 1209.706994] RAX: ffffffffffffffda RBX: 000055bc869eac20 RCX: 00007f7946433914
[ 1209.708082] RDX: 0000000000000000 RSI: 00007fffb99f2390 RDI: 0000000000000005
[ 1209.709120] RBP: 00007fffb99f2390 R08: 000055bc84fe9320 R09: 00007fffb99f1f07
[ 1209.710110] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000038
[ 1209.711085] R13: 000055bc8502306e R14: 0000000000000000 R15: 0000000000000000
 Modules linked in:
 ---[ end trace a2d933ede7f730d8 ]---

Link: https://lore.kernel.org/r/20191226203148.2172200-1-krisman@collabora.com
Signed-off-by: Nick Black <nlb@google.com>
Co-developed-by: Salman Qazi <sqazi@google.com>
Signed-off-by: Salman Qazi <sqazi@google.com>
Co-developed-by: Junho Ryu <jayr@google.com>
Signed-off-by: Junho Ryu <jayr@google.com>
Co-developed-by: Khazhismel Kumykov <khazhy@google.com>
Signed-off-by: Khazhismel Kumykov <khazhy@google.com>
Co-developed-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
scpcom pushed a commit to scpcom/linux that referenced this pull request Apr 16, 2020
@gregkh
jbd2: fix data races at struct journal_head
f87743e 
[ Upstream commit 6c5d911 ]

journal_head::b_transaction and journal_head::b_next_transaction could
be accessed concurrently as noticed by KCSAN,

 LTP: starting fsync04
 /dev/zero: Can't open blockdev
 EXT4-fs (loop0): mounting ext3 file system using the ext4 subsystem
 EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
 ==================================================================
 BUG: KCSAN: data-race in __jbd2_journal_refile_buffer [jbd2] / jbd2_write_access_granted [jbd2]

 write to 0xffff99f9b1bd0e30 of 8 bytes by task 25721 on cpu 70:
  __jbd2_journal_refile_buffer+0xdd/0x210 [jbd2]
  __jbd2_journal_refile_buffer at fs/jbd2/transaction.c:2569
  jbd2_journal_commit_transaction+0x2d15/0x3f20 [jbd2]
  (inlined by) jbd2_journal_commit_transaction at fs/jbd2/commit.c:1034
  kjournald2+0x13b/0x450 [jbd2]
  kthread+0x1cd/0x1f0
  ret_from_fork+0x27/0x50

 read to 0xffff99f9b1bd0e30 of 8 bytes by task 25724 on cpu 68:
  jbd2_write_access_granted+0x1b2/0x250 [jbd2]
  jbd2_write_access_granted at fs/jbd2/transaction.c:1155
  jbd2_journal_get_write_access+0x2c/0x60 [jbd2]
  __ext4_journal_get_write_access+0x50/0x90 [ext4]
  ext4_mb_mark_diskspace_used+0x158/0x620 [ext4]
  ext4_mb_new_blocks+0x54f/0xca0 [ext4]
  ext4_ind_map_blocks+0xc79/0x1b40 [ext4]
  ext4_map_blocks+0x3b4/0x950 [ext4]
  _ext4_get_block+0xfc/0x270 [ext4]
  ext4_get_block+0x3b/0x50 [ext4]
  __block_write_begin_int+0x22e/0xae0
  __block_write_begin+0x39/0x50
  ext4_write_begin+0x388/0xb50 [ext4]
  generic_perform_write+0x15d/0x290
  ext4_buffered_write_iter+0x11f/0x210 [ext4]
  ext4_file_write_iter+0xce/0x9e0 [ext4]
  new_sync_write+0x29c/0x3b0
  __vfs_write+0x92/0xa0
  vfs_write+0x103/0x260
  ksys_write+0x9d/0x130
  __x64_sys_write+0x4c/0x60
  do_syscall_64+0x91/0xb05
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

 5 locks held by fsync04/25724:
  #0: ffff99f9911093f8 (sb_writers#13){.+.+}, at: vfs_write+0x21c/0x260
  #1: ffff99f9db4c0348 (&sb->s_type->i_mutex_key#15){+.+.}, at: ext4_buffered_write_iter+0x65/0x210 [ext4]
  #2: ffff99f5e7dfcf58 (jbd2_handle){++++}, at: start_this_handle+0x1c1/0x9d0 [jbd2]
  #3: ffff99f9db4c0168 (&ei->i_data_sem){++++}, at: ext4_map_blocks+0x176/0x950 [ext4]
  #4: ffffffff99086b40 (rcu_read_lock){....}, at: jbd2_write_access_granted+0x4e/0x250 [jbd2]
 irq event stamp: 1407125
 hardirqs last  enabled at (1407125): [<ffffffff980da9b7>] __find_get_block+0x107/0x790
 hardirqs last disabled at (1407124): [<ffffffff980da8f9>] __find_get_block+0x49/0x790
 softirqs last  enabled at (1405528): [<ffffffff98a0034c>] __do_softirq+0x34c/0x57c
 softirqs last disabled at (1405521): [<ffffffff97cc67a2>] irq_exit+0xa2/0xc0

 Reported by Kernel Concurrency Sanitizer on:
 CPU: 68 PID: 25724 Comm: fsync04 Tainted: G L 5.6.0-rc2-next-20200221+ ayufan-rock64#7
 Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 07/10/2019

The plain reads are outside of jh->b_state_lock critical section which result
in data races. Fix them by adding pairs of READ|WRITE_ONCE().

Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Qian Cai <cai@lca.pw>
Link: https://lore.kernel.org/r/20200222043111.2227-1-cai@lca.pw
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
scpcom pushed a commit to scpcom/linux that referenced this pull request May 8, 2020
@gregkh
ext4: fix a data race at inode->i_blocks
d42e1f7 
commit 28936b6 upstream.

inode->i_blocks could be accessed concurrently as noticed by KCSAN,

 BUG: KCSAN: data-race in ext4_do_update_inode [ext4] / inode_add_bytes

 write to 0xffff9a00d4b982d0 of 8 bytes by task 22100 on cpu 118:
  inode_add_bytes+0x65/0xf0
  __inode_add_bytes at fs/stat.c:689
  (inlined by) inode_add_bytes at fs/stat.c:702
  ext4_mb_new_blocks+0x418/0xca0 [ext4]
  ext4_ext_map_blocks+0x1a6b/0x27b0 [ext4]
  ext4_map_blocks+0x1a9/0x950 [ext4]
  _ext4_get_block+0xfc/0x270 [ext4]
  ext4_get_block_unwritten+0x33/0x50 [ext4]
  __block_write_begin_int+0x22e/0xae0
  __block_write_begin+0x39/0x50
  ext4_write_begin+0x388/0xb50 [ext4]
  ext4_da_write_begin+0x35f/0x8f0 [ext4]
  generic_perform_write+0x15d/0x290
  ext4_buffered_write_iter+0x11f/0x210 [ext4]
  ext4_file_write_iter+0xce/0x9e0 [ext4]
  new_sync_write+0x29c/0x3b0
  __vfs_write+0x92/0xa0
  vfs_write+0x103/0x260
  ksys_write+0x9d/0x130
  __x64_sys_write+0x4c/0x60
  do_syscall_64+0x91/0xb05
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

 read to 0xffff9a00d4b982d0 of 8 bytes by task 8 on cpu 65:
  ext4_do_update_inode+0x4a0/0xf60 [ext4]
  ext4_inode_blocks_set at fs/ext4/inode.c:4815
  ext4_mark_iloc_dirty+0xaf/0x160 [ext4]
  ext4_mark_inode_dirty+0x129/0x3e0 [ext4]
  ext4_convert_unwritten_extents+0x253/0x2d0 [ext4]
  ext4_convert_unwritten_io_end_vec+0xc5/0x150 [ext4]
  ext4_end_io_rsv_work+0x22c/0x350 [ext4]
  process_one_work+0x54f/0xb90
  worker_thread+0x80/0x5f0
  kthread+0x1cd/0x1f0
  ret_from_fork+0x27/0x50

 4 locks held by kworker/u256:0/8:
  #0: ffff9a025abc4328 ((wq_completion)ext4-rsv-conversion){+.+.}, at: process_one_work+0x443/0xb90
  #1: ffffab5a862dbe20 ((work_completion)(&ei->i_rsv_conversion_work)){+.+.}, at: process_one_work+0x443/0xb90
  #2: ffff9a025a9d0f58 (jbd2_handle){++++}, at: start_this_handle+0x1c1/0x9d0 [jbd2]
  #3: ffff9a00d4b985d8 (&(&ei->i_raw_lock)->rlock){+.+.}, at: ext4_do_update_inode+0xaa/0xf60 [ext4]
 irq event stamp: 3009267
 hardirqs last  enabled at (3009267): [<ffffffff980da9b7>] __find_get_block+0x107/0x790
 hardirqs last disabled at (3009266): [<ffffffff980da8f9>] __find_get_block+0x49/0x790
 softirqs last  enabled at (3009230): [<ffffffff98a0034c>] __do_softirq+0x34c/0x57c
 softirqs last disabled at (3009223): [<ffffffff97cc67a2>] irq_exit+0xa2/0xc0

 Reported by Kernel Concurrency Sanitizer on:
 CPU: 65 PID: 8 Comm: kworker/u256:0 Tainted: G L 5.6.0-rc2-next-20200221+ ayufan-rock64#7
 Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 07/10/2019
 Workqueue: ext4-rsv-conversion ext4_end_io_rsv_work [ext4]

The plain read is outside of inode->i_lock critical section which
results in a data race. Fix it by adding READ_ONCE() there.

Link: https://lore.kernel.org/r/20200222043258.2279-1-cai@lca.pw
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
scpcom pushed a commit to scpcom/linux that referenced this pull request May 16, 2020
@isubrama @tobetter
drivers: net: xgene: fix: Use separate resources
4c68bb9 
This patch fixes the following kernel crash during SGMII based 1GbE probe.

	BUG: Bad page state in process swapper/0  pfn:40fe6ad
	page:ffffffbee37a75d8 count:-1 mapcount:0 mapping:          (null) index:0x0
	flags: 0x0()
	page dumped because: nonzero _count
	Modules linked in:
	CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.17.0+ ayufan-rock64#7
	Call trace:
	[<ffffffc000087fa0>] dump_backtrace+0x0/0x12c
	[<ffffffc0000880dc>] show_stack+0x10/0x1c
	[<ffffffc0004d981c>] dump_stack+0x74/0xc4
	[<ffffffc00012fe70>] bad_page+0xd8/0x128
	[<ffffffc000133000>] get_page_from_freelist+0x4b8/0x640
	[<ffffffc000133260>] __alloc_pages_nodemask+0xd8/0x834
	[<ffffffc0004194f8>] __netdev_alloc_frag+0x124/0x1b8
	[<ffffffc00041bfdc>] __netdev_alloc_skb+0x90/0x10c
	[<ffffffc00039ff30>] xgene_enet_refill_bufpool+0x11c/0x280
	[<ffffffc0003a11a4>] xgene_enet_process_ring+0x168/0x340
	[<ffffffc0003a1498>] xgene_enet_napi+0x1c/0x50
	[<ffffffc00042b454>] net_rx_action+0xc8/0x18c
	[<ffffffc0000b0880>] __do_softirq+0x114/0x24c
	[<ffffffc0000b0c34>] irq_exit+0x94/0xc8
	[<ffffffc0000e68a0>] __handle_domain_irq+0x8c/0xf4
	[<ffffffc000081288>] gic_handle_irq+0x30/0x7c

This was due to hardware resource sharing conflict with the firmware. This
patch fixes this crash by using resources (descriptor ring, prefetch buffer)
that are not shared.

Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Signed-off-by: Keyur Chudgar <kchudgar@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
scpcom pushed a commit to scpcom/linux that referenced this pull request Jun 13, 2020
@mcgrof @gregkh
coredump: fix crash when umh is disabled
480534e 
commit 3740d93 upstream.

Commit 64e90a8 ("Introduce STATIC_USERMODEHELPER to mediate
call_usermodehelper()") added the optiont to disable all
call_usermodehelper() calls by setting STATIC_USERMODEHELPER_PATH to
an empty string. When this is done, and crashdump is triggered, it
will crash on null pointer dereference, since we make assumptions
over what call_usermodehelper_exec() did.

This has been reported by Sergey when one triggers a a coredump
with the following configuration:

```
CONFIG_STATIC_USERMODEHELPER=y
CONFIG_STATIC_USERMODEHELPER_PATH=""
kernel.core_pattern = |/usr/lib/systemd/systemd-coredump %P %u %g %s %t %c %h %e
```

The way disabling the umh was designed was that call_usermodehelper_exec()
would just return early, without an error. But coredump assumes
certain variables are set up for us when this happens, and calls
ile_start_write(cprm.file) with a NULL file.

[    2.819676] BUG: kernel NULL pointer dereference, address: 0000000000000020
[    2.819859] #PF: supervisor read access in kernel mode
[    2.820035] #PF: error_code(0x0000) - not-present page
[    2.820188] PGD 0 P4D 0
[    2.820305] Oops: 0000 [#1] SMP PTI
[    2.820436] CPU: 2 PID: 89 Comm: a Not tainted 5.7.0-rc1+ ayufan-rock64#7
[    2.820680] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190711_202441-buildvm-armv7-10.arm.fedoraproject.org-2.fc31 04/01/2014
[    2.821150] RIP: 0010:do_coredump+0xd80/0x1060
[    2.821385] Code: e8 95 11 ed ff 48 c7 c6 cc a7 b4 81 48 8d bd 28 ff
ff ff 89 c2 e8 70 f1 ff ff 41 89 c2 85 c0 0f 84 72 f7 ff ff e9 b4 fe ff
ff <48> 8b 57 20 0f b7 02 66 25 00 f0 66 3d 00 8
0 0f 84 9c 01 00 00 44
[    2.822014] RSP: 0000:ffffc9000029bcb8 EFLAGS: 00010246
[    2.822339] RAX: 0000000000000000 RBX: ffff88803f860000 RCX: 000000000000000a
[    2.822746] RDX: 0000000000000009 RSI: 0000000000000282 RDI: 0000000000000000
[    2.823141] RBP: ffffc9000029bde8 R08: 0000000000000000 R09: ffffc9000029bc00
[    2.823508] R10: 0000000000000001 R11: ffff88803dec90be R12: ffffffff81c39da0
[    2.823902] R13: ffff88803de84400 R14: 0000000000000000 R15: 0000000000000000
[    2.824285] FS:  00007fee08183540(0000) GS:ffff88803e480000(0000) knlGS:0000000000000000
[    2.824767] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    2.825111] CR2: 0000000000000020 CR3: 000000003f856005 CR4: 0000000000060ea0
[    2.825479] Call Trace:
[    2.825790]  get_signal+0x11e/0x720
[    2.826087]  do_signal+0x1d/0x670
[    2.826361]  ? force_sig_info_to_task+0xc1/0xf0
[    2.826691]  ? force_sig_fault+0x3c/0x40
[    2.826996]  ? do_trap+0xc9/0x100
[    2.827179]  exit_to_usermode_loop+0x49/0x90
[    2.827359]  prepare_exit_to_usermode+0x77/0xb0
[    2.827559]  ? invalid_op+0xa/0x30
[    2.827747]  ret_from_intr+0x20/0x20
[    2.827921] RIP: 0033:0x55e2c76d2129
[    2.828107] Code: 2d ff ff ff e8 68 ff ff ff 5d c6 05 18 2f 00 00 01
c3 0f 1f 80 00 00 00 00 c3 0f 1f 80 00 00 00 00 e9 7b ff ff ff 55 48 89
e5 <0f> 0b b8 00 00 00 00 5d c3 66 2e 0f 1f 84 0
0 00 00 00 00 0f 1f 40
[    2.828603] RSP: 002b:00007fffeba5e080 EFLAGS: 00010246
[    2.828801] RAX: 000055e2c76d2125 RBX: 0000000000000000 RCX: 00007fee0817c718
[    2.829034] RDX: 00007fffeba5e188 RSI: 00007fffeba5e178 RDI: 0000000000000001
[    2.829257] RBP: 00007fffeba5e080 R08: 0000000000000000 R09: 00007fee08193c00
[    2.829482] R10: 0000000000000009 R11: 0000000000000000 R12: 000055e2c76d2040
[    2.829727] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
[    2.829964] CR2: 0000000000000020
[    2.830149] ---[ end trace ceed83d8c68a1bf1 ]---
```

Cc: <stable@vger.kernel.org> # v4.11+
Fixes: 64e90a8 ("Introduce STATIC_USERMODEHELPER to mediate call_usermodehelper()")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=199795
Reported-by: Tony Vroon <chainsaw@gentoo.org>
Reported-by: Sergey Kvachonok <ravenexp@gmail.com>
Tested-by: Sergei Trofimovich <slyfox@gentoo.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20200416162859.26518-1-mcgrof@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
scpcom pushed a commit to scpcom/linux that referenced this pull request Aug 16, 2020
@gregkh
tools lib traceevent: Fix memory leak in process_dynamic_array_len
3429579 
[ Upstream commit e24c644 ]

I compiled with AddressSanitizer and I had these memory leaks while I
was using the tep_parse_format function:

    Direct leak of 28 byte(s) in 4 object(s) allocated from:
        #0 0x7fb07db49ffe in __interceptor_realloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10dffe)
        #1 0x7fb07a724228 in extend_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:985
        #2 0x7fb07a724c21 in __read_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1140
        #3 0x7fb07a724f78 in read_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1206
        #4 0x7fb07a725191 in __read_expect_type /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1291
        #5 0x7fb07a7251df in read_expect_type /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1299
        #6 0x7fb07a72e6c8 in process_dynamic_array_len /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:2849
        ayufan-rock64#7 0x7fb07a7304b8 in process_function /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3161
        ayufan-rock64#8 0x7fb07a730900 in process_arg_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3207
        ayufan-rock64#9 0x7fb07a727c0b in process_arg /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1786
        ayufan-rock64#10 0x7fb07a731080 in event_read_print_args /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3285
        ayufan-rock64#11 0x7fb07a731722 in event_read_print /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3369
        ayufan-rock64#12 0x7fb07a740054 in __tep_parse_format /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6335
        ayufan-rock64#13 0x7fb07a74047a in __parse_event /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6389
        ayufan-rock64#14 0x7fb07a740536 in tep_parse_format /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6431
        ayufan-rock64#15 0x7fb07a785acf in parse_event ../../../src/fs-src/fs.c:251
        ayufan-rock64#16 0x7fb07a785ccd in parse_systems ../../../src/fs-src/fs.c:284
        ayufan-rock64#17 0x7fb07a786fb3 in read_metadata ../../../src/fs-src/fs.c:593
        ayufan-rock64#18 0x7fb07a78760e in ftrace_fs_source_init ../../../src/fs-src/fs.c:727
        ayufan-rock64#19 0x7fb07d90c19c in add_component_with_init_method_data ../../../../src/lib/graph/graph.c:1048
        ayufan-rock64#20 0x7fb07d90c87b in add_source_component_with_initialize_method_data ../../../../src/lib/graph/graph.c:1127
        ayufan-rock64#21 0x7fb07d90c92a in bt_graph_add_source_component ../../../../src/lib/graph/graph.c:1152
        ayufan-rock64#22 0x55db11aa632e in cmd_run_ctx_create_components_from_config_components ../../../src/cli/babeltrace2.c:2252
        ayufan-rock64#23 0x55db11aa6fda in cmd_run_ctx_create_components ../../../src/cli/babeltrace2.c:2347
        ayufan-rock64#24 0x55db11aa780c in cmd_run ../../../src/cli/babeltrace2.c:2461
        ayufan-rock64#25 0x55db11aa8a7d in main ../../../src/cli/babeltrace2.c:2673
        ayufan-rock64#26 0x7fb07d5460b2 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x270b2)

The token variable in the process_dynamic_array_len function is
allocated in the read_expect_type function, but is not freed before
calling the read_token function.

Free the token variable before calling read_token in order to plug the
leak.

Signed-off-by: Philippe Duplessis-Guindon <pduplessis@efficios.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: https://lore.kernel.org/linux-trace-devel/20200730150236.5392-1-pduplessis@efficios.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
scpcom pushed a commit to scpcom/linux that referenced this pull request Sep 23, 2020
@josefbacik @gregkh
btrfs: allocate scrub workqueues outside of locks
c37cc19 
commit e89c4a9 upstream.

I got the following lockdep splat while testing:

  ======================================================
  WARNING: possible circular locking dependency detected
  5.8.0-rc7-00172-g021118712e59 #932 Not tainted
  ------------------------------------------------------
  btrfs/229626 is trying to acquire lock:
  ffffffff828513f0 (cpu_hotplug_lock){++++}-{0:0}, at: alloc_workqueue+0x378/0x450

  but task is already holding lock:
  ffff889dd3889518 (&fs_info->scrub_lock){+.+.}-{3:3}, at: btrfs_scrub_dev+0x11c/0x630

  which lock already depends on the new lock.

  the existing dependency chain (in reverse order) is:

  -> ayufan-rock64#7 (&fs_info->scrub_lock){+.+.}-{3:3}:
	 __mutex_lock+0x9f/0x930
	 btrfs_scrub_dev+0x11c/0x630
	 btrfs_dev_replace_by_ioctl.cold.21+0x10a/0x1d4
	 btrfs_ioctl+0x2799/0x30a0
	 ksys_ioctl+0x83/0xc0
	 __x64_sys_ioctl+0x16/0x20
	 do_syscall_64+0x50/0x90
	 entry_SYSCALL_64_after_hwframe+0x44/0xa9

  -> #6 (&fs_devs->device_list_mutex){+.+.}-{3:3}:
	 __mutex_lock+0x9f/0x930
	 btrfs_run_dev_stats+0x49/0x480
	 commit_cowonly_roots+0xb5/0x2a0
	 btrfs_commit_transaction+0x516/0xa60
	 sync_filesystem+0x6b/0x90
	 generic_shutdown_super+0x22/0x100
	 kill_anon_super+0xe/0x30
	 btrfs_kill_super+0x12/0x20
	 deactivate_locked_super+0x29/0x60
	 cleanup_mnt+0xb8/0x140
	 task_work_run+0x6d/0xb0
	 __prepare_exit_to_usermode+0x1cc/0x1e0
	 do_syscall_64+0x5c/0x90
	 entry_SYSCALL_64_after_hwframe+0x44/0xa9

  -> #5 (&fs_info->tree_log_mutex){+.+.}-{3:3}:
	 __mutex_lock+0x9f/0x930
	 btrfs_commit_transaction+0x4bb/0xa60
	 sync_filesystem+0x6b/0x90
	 generic_shutdown_super+0x22/0x100
	 kill_anon_super+0xe/0x30
	 btrfs_kill_super+0x12/0x20
	 deactivate_locked_super+0x29/0x60
	 cleanup_mnt+0xb8/0x140
	 task_work_run+0x6d/0xb0
	 __prepare_exit_to_usermode+0x1cc/0x1e0
	 do_syscall_64+0x5c/0x90
	 entry_SYSCALL_64_after_hwframe+0x44/0xa9

  -> #4 (&fs_info->reloc_mutex){+.+.}-{3:3}:
	 __mutex_lock+0x9f/0x930
	 btrfs_record_root_in_trans+0x43/0x70
	 start_transaction+0xd1/0x5d0
	 btrfs_dirty_inode+0x42/0xd0
	 touch_atime+0xa1/0xd0
	 btrfs_file_mmap+0x3f/0x60
	 mmap_region+0x3a4/0x640
	 do_mmap+0x376/0x580
	 vm_mmap_pgoff+0xd5/0x120
	 ksys_mmap_pgoff+0x193/0x230
	 do_syscall_64+0x50/0x90
	 entry_SYSCALL_64_after_hwframe+0x44/0xa9

  -> #3 (&mm->mmap_lock#2){++++}-{3:3}:
	 __might_fault+0x68/0x90
	 _copy_to_user+0x1e/0x80
	 perf_read+0x141/0x2c0
	 vfs_read+0xad/0x1b0
	 ksys_read+0x5f/0xe0
	 do_syscall_64+0x50/0x90
	 entry_SYSCALL_64_after_hwframe+0x44/0xa9

  -> #2 (&cpuctx_mutex){+.+.}-{3:3}:
	 __mutex_lock+0x9f/0x930
	 perf_event_init_cpu+0x88/0x150
	 perf_event_init+0x1db/0x20b
	 start_kernel+0x3ae/0x53c
	 secondary_startup_64+0xa4/0xb0

  -> #1 (pmus_lock){+.+.}-{3:3}:
	 __mutex_lock+0x9f/0x930
	 perf_event_init_cpu+0x4f/0x150
	 cpuhp_invoke_callback+0xb1/0x900
	 _cpu_up.constprop.26+0x9f/0x130
	 cpu_up+0x7b/0xc0
	 bringup_nonboot_cpus+0x4f/0x60
	 smp_init+0x26/0x71
	 kernel_init_freeable+0x110/0x258
	 kernel_init+0xa/0x103
	 ret_from_fork+0x1f/0x30

  -> #0 (cpu_hotplug_lock){++++}-{0:0}:
	 __lock_acquire+0x1272/0x2310
	 lock_acquire+0x9e/0x360
	 cpus_read_lock+0x39/0xb0
	 alloc_workqueue+0x378/0x450
	 __btrfs_alloc_workqueue+0x15d/0x200
	 btrfs_alloc_workqueue+0x51/0x160
	 scrub_workers_get+0x5a/0x170
	 btrfs_scrub_dev+0x18c/0x630
	 btrfs_dev_replace_by_ioctl.cold.21+0x10a/0x1d4
	 btrfs_ioctl+0x2799/0x30a0
	 ksys_ioctl+0x83/0xc0
	 __x64_sys_ioctl+0x16/0x20
	 do_syscall_64+0x50/0x90
	 entry_SYSCALL_64_after_hwframe+0x44/0xa9

  other info that might help us debug this:

  Chain exists of:
    cpu_hotplug_lock --> &fs_devs->device_list_mutex --> &fs_info->scrub_lock

   Possible unsafe locking scenario:

	 CPU0                    CPU1
	 ----                    ----
    lock(&fs_info->scrub_lock);
				 lock(&fs_devs->device_list_mutex);
				 lock(&fs_info->scrub_lock);
    lock(cpu_hotplug_lock);

   *** DEADLOCK ***

  2 locks held by btrfs/229626:
   #0: ffff88bfe8bb86e0 (&fs_devs->device_list_mutex){+.+.}-{3:3}, at: btrfs_scrub_dev+0xbd/0x630
   #1: ffff889dd3889518 (&fs_info->scrub_lock){+.+.}-{3:3}, at: btrfs_scrub_dev+0x11c/0x630

  stack backtrace:
  CPU: 15 PID: 229626 Comm: btrfs Kdump: loaded Not tainted 5.8.0-rc7-00172-g021118712e59 #932
  Hardware name: Quanta Tioga Pass Single Side 01-0030993006/Tioga Pass Single Side, BIOS F08_3A18 12/20/2018
  Call Trace:
   dump_stack+0x78/0xa0
   check_noncircular+0x165/0x180
   __lock_acquire+0x1272/0x2310
   lock_acquire+0x9e/0x360
   ? alloc_workqueue+0x378/0x450
   cpus_read_lock+0x39/0xb0
   ? alloc_workqueue+0x378/0x450
   alloc_workqueue+0x378/0x450
   ? rcu_read_lock_sched_held+0x52/0x80
   __btrfs_alloc_workqueue+0x15d/0x200
   btrfs_alloc_workqueue+0x51/0x160
   scrub_workers_get+0x5a/0x170
   btrfs_scrub_dev+0x18c/0x630
   ? start_transaction+0xd1/0x5d0
   btrfs_dev_replace_by_ioctl.cold.21+0x10a/0x1d4
   btrfs_ioctl+0x2799/0x30a0
   ? do_sigaction+0x102/0x250
   ? lockdep_hardirqs_on_prepare+0xca/0x160
   ? _raw_spin_unlock_irq+0x24/0x30
   ? trace_hardirqs_on+0x1c/0xe0
   ? _raw_spin_unlock_irq+0x24/0x30
   ? do_sigaction+0x102/0x250
   ? ksys_ioctl+0x83/0xc0
   ksys_ioctl+0x83/0xc0
   __x64_sys_ioctl+0x16/0x20
   do_syscall_64+0x50/0x90
   entry_SYSCALL_64_after_hwframe+0x44/0xa9

This happens because we're allocating the scrub workqueues under the
scrub and device list mutex, which brings in a whole host of other
dependencies.

Because the work queue allocation is done with GFP_KERNEL, it can
trigger reclaim, which can lead to a transaction commit, which in turns
needs the device_list_mutex, it can lead to a deadlock. A different
problem for which this fix is a solution.

Fix this by moving the actual allocation outside of the
scrub lock, and then only take the lock once we're ready to actually
assign them to the fs_info.  We'll now have to cleanup the workqueues in
a few more places, so I've added a helper to do the refcount dance to
safely free the workqueues.

CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
scpcom pushed a commit to scpcom/linux that referenced this pull request Sep 24, 2020
@namhyung @gregkh
perf parse-event: Fix memory leak in evsel->unit
b116e2d 
[ Upstream commit b12eea5 ]

The evsel->unit borrows a pointer of pmu event or alias instead of
owns a string.  But tool event (duration_time) passes a result of
strdup() caused a leak.

It was found by ASAN during metric test:

  Direct leak of 210 byte(s) in 70 object(s) allocated from:
    #0 0x7fe366fca0b5 in strdup (/lib/x86_64-linux-gnu/libasan.so.5+0x920b5)
    #1 0x559fbbcc6ea3 in add_event_tool util/parse-events.c:414
    #2 0x559fbbcc6ea3 in parse_events_add_tool util/parse-events.c:1414
    #3 0x559fbbd8474d in parse_events_parse util/parse-events.y:439
    #4 0x559fbbcc95da in parse_events__scanner util/parse-events.c:2096
    #5 0x559fbbcc95da in __parse_events util/parse-events.c:2141
    #6 0x559fbbc28555 in check_parse_id tests/pmu-events.c:406
    ayufan-rock64#7 0x559fbbc28555 in check_parse_id tests/pmu-events.c:393
    ayufan-rock64#8 0x559fbbc28555 in check_parse_cpu tests/pmu-events.c:415
    ayufan-rock64#9 0x559fbbc28555 in test_parsing tests/pmu-events.c:498
    ayufan-rock64#10 0x559fbbc0109b in run_test tests/builtin-test.c:410
    ayufan-rock64#11 0x559fbbc0109b in test_and_print tests/builtin-test.c:440
    ayufan-rock64#12 0x559fbbc03e69 in __cmd_test tests/builtin-test.c:695
    ayufan-rock64#13 0x559fbbc03e69 in cmd_test tests/builtin-test.c:807
    ayufan-rock64#14 0x559fbbc691f4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312
    ayufan-rock64#15 0x559fbbb071a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364
    ayufan-rock64#16 0x559fbbb071a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408
    ayufan-rock64#17 0x559fbbb071a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538
    ayufan-rock64#18 0x7fe366b68cc9 in __libc_start_main ../csu/libc-start.c:308

Fixes: f0fbb11 ("perf stat: Implement duration_time as a proper event")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200915031819.386559-6-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
scpcom pushed a commit to scpcom/linux that referenced this pull request Sep 24, 2020
@namhyung @gregkh
perf test: Free formats for perf pmu parse test
b7b1361 
[ Upstream commit d26383d ]

The following leaks were detected by ASAN:

  Indirect leak of 360 byte(s) in 9 object(s) allocated from:
    #0 0x7fecc305180e in calloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10780e)
    #1 0x560578f6dce5 in perf_pmu__new_format util/pmu.c:1333
    #2 0x560578f752fc in perf_pmu_parse util/pmu.y:59
    #3 0x560578f6a8b7 in perf_pmu__format_parse util/pmu.c:73
    #4 0x560578e07045 in test__pmu tests/pmu.c:155
    #5 0x560578de109b in run_test tests/builtin-test.c:410
    #6 0x560578de109b in test_and_print tests/builtin-test.c:440
    ayufan-rock64#7 0x560578de401a in __cmd_test tests/builtin-test.c:661
    ayufan-rock64#8 0x560578de401a in cmd_test tests/builtin-test.c:807
    ayufan-rock64#9 0x560578e49354 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312
    ayufan-rock64#10 0x560578ce71a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364
    ayufan-rock64#11 0x560578ce71a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408
    ayufan-rock64#12 0x560578ce71a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538
    ayufan-rock64#13 0x7fecc2b7acc9 in __libc_start_main ../csu/libc-start.c:308

Fixes: cff7f95 ("perf tests: Move pmu tests into separate object")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200915031819.386559-12-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
scpcom pushed a commit to scpcom/linux that referenced this pull request Dec 1, 2020
@yonghong-song @gregkh
selftests/bpf: Fix test_sysctl_loop{1, 2} failure due to clang change
061d2f3 
[ Upstream commit 7fb5eef ]

Andrii reported that with latest clang, when building selftests, we have
error likes:
  error: progs/test_sysctl_loop1.c:23:16: in function sysctl_tcp_mem i32 (%struct.bpf_sysctl*):
  Looks like the BPF stack limit of 512 bytes is exceeded.
  Please move large on stack variables into BPF per-cpu array map.

The error is triggered by the following LLVM patch:
  https://reviews.llvm.org/D87134

For example, the following code is from test_sysctl_loop1.c:
  static __always_inline int is_tcp_mem(struct bpf_sysctl *ctx)
  {
    volatile char tcp_mem_name[] = "net/ipv4/tcp_mem/very_very_very_very_long_pointless_string";
    ...
  }
Without the above LLVM patch, the compiler did optimization to load the string
(59 bytes long) with 7 64bit loads, 1 8bit load and 1 16bit load,
occupying 64 byte stack size.

With the above LLVM patch, the compiler only uses 8bit loads, but subregister is 32bit.
So stack requirements become 4 * 59 = 236 bytes. Together with other stuff on
the stack, total stack size exceeds 512 bytes, hence compiler complains and quits.

To fix the issue, removing "volatile" key word or changing "volatile" to
"const"/"static const" does not work, the string is put in .rodata.str1.1 section,
which libbpf did not process it and errors out with
  libbpf: elf: skipping unrecognized data section(6) .rodata.str1.1
  libbpf: prog 'sysctl_tcp_mem': bad map relo against '.L__const.is_tcp_mem.tcp_mem_name'
          in section '.rodata.str1.1'

Defining the string const as global variable can fix the issue as it puts the string constant
in '.rodata' section which is recognized by libbpf. In the future, when libbpf can process
'.rodata.str*.*' properly, the global definition can be changed back to local definition.

Defining tcp_mem_name as a global, however, triggered a verifier failure.
   ./test_progs -n 7/21
  libbpf: load bpf program failed: Permission denied
  libbpf: -- BEGIN DUMP LOG ---
  libbpf:
  invalid stack off=0 size=1
  verification time 6975 usec
  stack depth 160+64
  processed 889 insns (limit 1000000) max_states_per_insn 4 total_states
  14 peak_states 14 mark_read 10

  libbpf: -- END LOG --
  libbpf: failed to load program 'sysctl_tcp_mem'
  libbpf: failed to load object 'test_sysctl_loop2.o'
  test_bpf_verif_scale:FAIL:114
  ayufan-rock64#7/21 test_sysctl_loop2.o:FAIL
This actually exposed a bpf program bug. In test_sysctl_loop{1,2}, we have code
like
  const char tcp_mem_name[] = "<...long string...>";
  ...
  char name[64];
  ...
  for (i = 0; i < sizeof(tcp_mem_name); ++i)
      if (name[i] != tcp_mem_name[i])
          return 0;
In the above code, if sizeof(tcp_mem_name) > 64, name[i] access may be
out of bound. The sizeof(tcp_mem_name) is 59 for test_sysctl_loop1.c and
79 for test_sysctl_loop2.c.

Without promotion-to-global change, old compiler generates code where
the overflowed stack access is actually filled with valid value, so hiding
the bpf program bug. With promotion-to-global change, the code is different,
more specifically, the previous loading constants to stack is gone, and
"name" occupies stack[-64:0] and overflow access triggers a verifier error.
To fix the issue, adjust "name" buffer size properly.

Reported-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200909171542.3673449-1-yhs@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
scpcom pushed a commit to scpcom/linux that referenced this pull request Dec 1, 2020
@fdmanana @gregkh
btrfs: fix readahead hang and use-after-free after removing a device
c964d38 
commit 66d204a upstream.

Very sporadically I had test case btrfs/069 from fstests hanging (for
years, it is not a recent regression), with the following traces in
dmesg/syslog:

  [162301.160628] BTRFS info (device sdc): dev_replace from /dev/sdd (devid 2) to /dev/sdg started
  [162301.181196] BTRFS info (device sdc): scrub: finished on devid 4 with status: 0
  [162301.287162] BTRFS info (device sdc): dev_replace from /dev/sdd (devid 2) to /dev/sdg finished
  [162513.513792] INFO: task btrfs-transacti:1356167 blocked for more than 120 seconds.
  [162513.514318]       Not tainted 5.9.0-rc6-btrfs-next-69 #1
  [162513.514522] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  [162513.514747] task:btrfs-transacti state:D stack:    0 pid:1356167 ppid:     2 flags:0x00004000
  [162513.514751] Call Trace:
  [162513.514761]  __schedule+0x5ce/0xd00
  [162513.514765]  ? _raw_spin_unlock_irqrestore+0x3c/0x60
  [162513.514771]  schedule+0x46/0xf0
  [162513.514844]  wait_current_trans+0xde/0x140 [btrfs]
  [162513.514850]  ? finish_wait+0x90/0x90
  [162513.514864]  start_transaction+0x37c/0x5f0 [btrfs]
  [162513.514879]  transaction_kthread+0xa4/0x170 [btrfs]
  [162513.514891]  ? btrfs_cleanup_transaction+0x660/0x660 [btrfs]
  [162513.514894]  kthread+0x153/0x170
  [162513.514897]  ? kthread_stop+0x2c0/0x2c0
  [162513.514902]  ret_from_fork+0x22/0x30
  [162513.514916] INFO: task fsstress:1356184 blocked for more than 120 seconds.
  [162513.515192]       Not tainted 5.9.0-rc6-btrfs-next-69 #1
  [162513.515431] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  [162513.515680] task:fsstress        state:D stack:    0 pid:1356184 ppid:1356177 flags:0x00004000
  [162513.515682] Call Trace:
  [162513.515688]  __schedule+0x5ce/0xd00
  [162513.515691]  ? _raw_spin_unlock_irqrestore+0x3c/0x60
  [162513.515697]  schedule+0x46/0xf0
  [162513.515712]  wait_current_trans+0xde/0x140 [btrfs]
  [162513.515716]  ? finish_wait+0x90/0x90
  [162513.515729]  start_transaction+0x37c/0x5f0 [btrfs]
  [162513.515743]  btrfs_attach_transaction_barrier+0x1f/0x50 [btrfs]
  [162513.515753]  btrfs_sync_fs+0x61/0x1c0 [btrfs]
  [162513.515758]  ? __ia32_sys_fdatasync+0x20/0x20
  [162513.515761]  iterate_supers+0x87/0xf0
  [162513.515765]  ksys_sync+0x60/0xb0
  [162513.515768]  __do_sys_sync+0xa/0x10
  [162513.515771]  do_syscall_64+0x33/0x80
  [162513.515774]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
  [162513.515781] RIP: 0033:0x7f5238f50bd7
  [162513.515782] Code: Bad RIP value.
  [162513.515784] RSP: 002b:00007fff67b978e8 EFLAGS: 00000206 ORIG_RAX: 00000000000000a2
  [162513.515786] RAX: ffffffffffffffda RBX: 000055b1fad2c560 RCX: 00007f5238f50bd7
  [162513.515788] RDX: 00000000ffffffff RSI: 000000000daf0e74 RDI: 000000000000003a
  [162513.515789] RBP: 0000000000000032 R08: 000000000000000a R09: 00007f5239019be0
  [162513.515791] R10: fffffffffffff24f R11: 0000000000000206 R12: 000000000000003a
  [162513.515792] R13: 00007fff67b97950 R14: 00007fff67b97906 R15: 000055b1fad1a340
  [162513.515804] INFO: task fsstress:1356185 blocked for more than 120 seconds.
  [162513.516064]       Not tainted 5.9.0-rc6-btrfs-next-69 #1
  [162513.516329] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  [162513.516617] task:fsstress        state:D stack:    0 pid:1356185 ppid:1356177 flags:0x00000000
  [162513.516620] Call Trace:
  [162513.516625]  __schedule+0x5ce/0xd00
  [162513.516628]  ? _raw_spin_unlock_irqrestore+0x3c/0x60
  [162513.516634]  schedule+0x46/0xf0
  [162513.516647]  wait_current_trans+0xde/0x140 [btrfs]
  [162513.516650]  ? finish_wait+0x90/0x90
  [162513.516662]  start_transaction+0x4d7/0x5f0 [btrfs]
  [162513.516679]  btrfs_setxattr_trans+0x3c/0x100 [btrfs]
  [162513.516686]  __vfs_setxattr+0x66/0x80
  [162513.516691]  __vfs_setxattr_noperm+0x70/0x200
  [162513.516697]  vfs_setxattr+0x6b/0x120
  [162513.516703]  setxattr+0x125/0x240
  [162513.516709]  ? lock_acquire+0xb1/0x480
  [162513.516712]  ? mnt_want_write+0x20/0x50
  [162513.516721]  ? rcu_read_lock_any_held+0x8e/0xb0
  [162513.516723]  ? preempt_count_add+0x49/0xa0
  [162513.516725]  ? __sb_start_write+0x19b/0x290
  [162513.516727]  ? preempt_count_add+0x49/0xa0
  [162513.516732]  path_setxattr+0xba/0xd0
  [162513.516739]  __x64_sys_setxattr+0x27/0x30
  [162513.516741]  do_syscall_64+0x33/0x80
  [162513.516743]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
  [162513.516745] RIP: 0033:0x7f5238f56d5a
  [162513.516746] Code: Bad RIP value.
  [162513.516748] RSP: 002b:00007fff67b97868 EFLAGS: 00000202 ORIG_RAX: 00000000000000bc
  [162513.516750] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f5238f56d5a
  [162513.516751] RDX: 000055b1fbb0d5a0 RSI: 00007fff67b978a0 RDI: 000055b1fbb0d470
  [162513.516753] RBP: 000055b1fbb0d5a0 R08: 0000000000000001 R09: 00007fff67b97700
  [162513.516754] R10: 0000000000000004 R11: 0000000000000202 R12: 0000000000000004
  [162513.516756] R13: 0000000000000024 R14: 0000000000000001 R15: 00007fff67b978a0
  [162513.516767] INFO: task fsstress:1356196 blocked for more than 120 seconds.
  [162513.517064]       Not tainted 5.9.0-rc6-btrfs-next-69 #1
  [162513.517365] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  [162513.517763] task:fsstress        state:D stack:    0 pid:1356196 ppid:1356177 flags:0x00004000
  [162513.517780] Call Trace:
  [162513.517786]  __schedule+0x5ce/0xd00
  [162513.517789]  ? _raw_spin_unlock_irqrestore+0x3c/0x60
  [162513.517796]  schedule+0x46/0xf0
  [162513.517810]  wait_current_trans+0xde/0x140 [btrfs]
  [162513.517814]  ? finish_wait+0x90/0x90
  [162513.517829]  start_transaction+0x37c/0x5f0 [btrfs]
  [162513.517845]  btrfs_attach_transaction_barrier+0x1f/0x50 [btrfs]
  [162513.517857]  btrfs_sync_fs+0x61/0x1c0 [btrfs]
  [162513.517862]  ? __ia32_sys_fdatasync+0x20/0x20
  [162513.517865]  iterate_supers+0x87/0xf0
  [162513.517869]  ksys_sync+0x60/0xb0
  [162513.517872]  __do_sys_sync+0xa/0x10
  [162513.517875]  do_syscall_64+0x33/0x80
  [162513.517878]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
  [162513.517881] RIP: 0033:0x7f5238f50bd7
  [162513.517883] Code: Bad RIP value.
  [162513.517885] RSP: 002b:00007fff67b978e8 EFLAGS: 00000206 ORIG_RAX: 00000000000000a2
  [162513.517887] RAX: ffffffffffffffda RBX: 000055b1fad2c560 RCX: 00007f5238f50bd7
  [162513.517889] RDX: 0000000000000000 RSI: 000000007660add2 RDI: 0000000000000053
  [162513.517891] RBP: 0000000000000032 R08: 0000000000000067 R09: 00007f5239019be0
  [162513.517893] R10: fffffffffffff24f R11: 0000000000000206 R12: 0000000000000053
  [162513.517895] R13: 00007fff67b97950 R14: 00007fff67b97906 R15: 000055b1fad1a340
  [162513.517908] INFO: task fsstress:1356197 blocked for more than 120 seconds.
  [162513.518298]       Not tainted 5.9.0-rc6-btrfs-next-69 #1
  [162513.518672] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  [162513.519157] task:fsstress        state:D stack:    0 pid:1356197 ppid:1356177 flags:0x00000000
  [162513.519160] Call Trace:
  [162513.519165]  __schedule+0x5ce/0xd00
  [162513.519168]  ? _raw_spin_unlock_irqrestore+0x3c/0x60
  [162513.519174]  schedule+0x46/0xf0
  [162513.519190]  wait_current_trans+0xde/0x140 [btrfs]
  [162513.519193]  ? finish_wait+0x90/0x90
  [162513.519206]  start_transaction+0x4d7/0x5f0 [btrfs]
  [162513.519222]  btrfs_create+0x57/0x200 [btrfs]
  [162513.519230]  lookup_open+0x522/0x650
  [162513.519246]  path_openat+0x2b8/0xa50
  [162513.519270]  do_filp_open+0x91/0x100
  [162513.519275]  ? find_held_lock+0x32/0x90
  [162513.519280]  ? lock_acquired+0x33b/0x470
  [162513.519285]  ? do_raw_spin_unlock+0x4b/0xc0
  [162513.519287]  ? _raw_spin_unlock+0x29/0x40
  [162513.519295]  do_sys_openat2+0x20d/0x2d0
  [162513.519300]  do_sys_open+0x44/0x80
  [162513.519304]  do_syscall_64+0x33/0x80
  [162513.519307]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
  [162513.519309] RIP: 0033:0x7f5238f4a903
  [162513.519310] Code: Bad RIP value.
  [162513.519312] RSP: 002b:00007fff67b97758 EFLAGS: 00000246 ORIG_RAX: 0000000000000055
  [162513.519314] RAX: ffffffffffffffda RBX: 00000000ffffffff RCX: 00007f5238f4a903
  [162513.519316] RDX: 0000000000000000 RSI: 00000000000001b6 RDI: 000055b1fbb0d470
  [162513.519317] RBP: 00007fff67b978c0 R08: 0000000000000001 R09: 0000000000000002
  [162513.519319] R10: 00007fff67b974f7 R11: 0000000000000246 R12: 0000000000000013
  [162513.519320] R13: 00000000000001b6 R14: 00007fff67b97906 R15: 000055b1fad1c620
  [162513.519332] INFO: task btrfs:1356211 blocked for more than 120 seconds.
  [162513.519727]       Not tainted 5.9.0-rc6-btrfs-next-69 #1
  [162513.520115] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  [162513.520508] task:btrfs           state:D stack:    0 pid:1356211 ppid:1356178 flags:0x00004002
  [162513.520511] Call Trace:
  [162513.520516]  __schedule+0x5ce/0xd00
  [162513.520519]  ? _raw_spin_unlock_irqrestore+0x3c/0x60
  [162513.520525]  schedule+0x46/0xf0
  [162513.520544]  btrfs_scrub_pause+0x11f/0x180 [btrfs]
  [162513.520548]  ? finish_wait+0x90/0x90
  [162513.520562]  btrfs_commit_transaction+0x45a/0xc30 [btrfs]
  [162513.520574]  ? start_transaction+0xe0/0x5f0 [btrfs]
  [162513.520596]  btrfs_dev_replace_finishing+0x6d8/0x711 [btrfs]
  [162513.520619]  btrfs_dev_replace_by_ioctl.cold+0x1cc/0x1fd [btrfs]
  [162513.520639]  btrfs_ioctl+0x2a25/0x36f0 [btrfs]
  [162513.520643]  ? do_sigaction+0xf3/0x240
  [162513.520645]  ? find_held_lock+0x32/0x90
  [162513.520648]  ? do_sigaction+0xf3/0x240
  [162513.520651]  ? lock_acquired+0x33b/0x470
  [162513.520655]  ? _raw_spin_unlock_irq+0x24/0x50
  [162513.520657]  ? lockdep_hardirqs_on+0x7d/0x100
  [162513.520660]  ? _raw_spin_unlock_irq+0x35/0x50
  [162513.520662]  ? do_sigaction+0xf3/0x240
  [162513.520671]  ? __x64_sys_ioctl+0x83/0xb0
  [162513.520672]  __x64_sys_ioctl+0x83/0xb0
  [162513.520677]  do_syscall_64+0x33/0x80
  [162513.520679]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
  [162513.520681] RIP: 0033:0x7fc3cd307d87
  [162513.520682] Code: Bad RIP value.
  [162513.520684] RSP: 002b:00007ffe30a56bb8 EFLAGS: 00000202 ORIG_RAX: 0000000000000010
  [162513.520686] RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 00007fc3cd307d87
  [162513.520687] RDX: 00007ffe30a57a30 RSI: 00000000ca289435 RDI: 0000000000000003
  [162513.520689] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
  [162513.520690] R10: 0000000000000008 R11: 0000000000000202 R12: 0000000000000003
  [162513.520692] R13: 0000557323a212e0 R14: 00007ffe30a5a520 R15: 0000000000000001
  [162513.520703]
		  Showing all locks held in the system:
  [162513.520712] 1 lock held by khungtaskd/54:
  [162513.520713]  #0: ffffffffb40a91a0 (rcu_read_lock){....}-{1:2}, at: debug_show_all_locks+0x15/0x197
  [162513.520728] 1 lock held by in:imklog/596:
  [162513.520729]  #0: ffff8f3f0d781400 (&f->f_pos_lock){+.+.}-{3:3}, at: __fdget_pos+0x4d/0x60
  [162513.520782] 1 lock held by btrfs-transacti/1356167:
  [162513.520784]  #0: ffff8f3d810cc848 (&fs_info->transaction_kthread_mutex){+.+.}-{3:3}, at: transaction_kthread+0x4a/0x170 [btrfs]
  [162513.520798] 1 lock held by btrfs/1356190:
  [162513.520800]  #0: ffff8f3d57644470 (sb_writers#15){.+.+}-{0:0}, at: mnt_want_write_file+0x22/0x60
  [162513.520805] 1 lock held by fsstress/1356184:
  [162513.520806]  #0: ffff8f3d576440e8 (&type->s_umount_key#62){++++}-{3:3}, at: iterate_supers+0x6f/0xf0
  [162513.520811] 3 locks held by fsstress/1356185:
  [162513.520812]  #0: ffff8f3d57644470 (sb_writers#15){.+.+}-{0:0}, at: mnt_want_write+0x20/0x50
  [162513.520815]  #1: ffff8f3d80a650b8 (&type->i_mutex_dir_key#10){++++}-{3:3}, at: vfs_setxattr+0x50/0x120
  [162513.520820]  #2: ffff8f3d57644690 (sb_internal#2){.+.+}-{0:0}, at: start_transaction+0x40e/0x5f0 [btrfs]
  [162513.520833] 1 lock held by fsstress/1356196:
  [162513.520834]  #0: ffff8f3d576440e8 (&type->s_umount_key#62){++++}-{3:3}, at: iterate_supers+0x6f/0xf0
  [162513.520838] 3 locks held by fsstress/1356197:
  [162513.520839]  #0: ffff8f3d57644470 (sb_writers#15){.+.+}-{0:0}, at: mnt_want_write+0x20/0x50
  [162513.520843]  #1: ffff8f3d506465e8 (&type->i_mutex_dir_key#10){++++}-{3:3}, at: path_openat+0x2a7/0xa50
  [162513.520846]  #2: ffff8f3d57644690 (sb_internal#2){.+.+}-{0:0}, at: start_transaction+0x40e/0x5f0 [btrfs]
  [162513.520858] 2 locks held by btrfs/1356211:
  [162513.520859]  #0: ffff8f3d810cde30 (&fs_info->dev_replace.lock_finishing_cancel_unmount){+.+.}-{3:3}, at: btrfs_dev_replace_finishing+0x52/0x711 [btrfs]
  [162513.520877]  #1: ffff8f3d57644690 (sb_internal#2){.+.+}-{0:0}, at: start_transaction+0x40e/0x5f0 [btrfs]

This was weird because the stack traces show that a transaction commit,
triggered by a device replace operation, is blocking trying to pause any
running scrubs but there are no stack traces of blocked tasks doing a
scrub.

After poking around with drgn, I noticed there was a scrub task that was
constantly running and blocking for shorts periods of time:

  >>> t = find_task(prog, 1356190)
  >>> prog.stack_trace(t)
  #0  __schedule+0x5ce/0xcfc
  #1  schedule+0x46/0xe4
  #2  schedule_timeout+0x1df/0x475
  #3  btrfs_reada_wait+0xda/0x132
  #4  scrub_stripe+0x2a8/0x112f
  #5  scrub_chunk+0xcd/0x134
  #6  scrub_enumerate_chunks+0x29e/0x5ee
  ayufan-rock64#7  btrfs_scrub_dev+0x2d5/0x91b
  ayufan-rock64#8  btrfs_ioctl+0x7f5/0x36e7
  ayufan-rock64#9  __x64_sys_ioctl+0x83/0xb0
  ayufan-rock64#10 do_syscall_64+0x33/0x77
  ayufan-rock64#11 entry_SYSCALL_64+0x7c/0x156

Which corresponds to:

int btrfs_reada_wait(void *handle)
{
    struct reada_control *rc = handle;
    struct btrfs_fs_info *fs_info = rc->fs_info;

    while (atomic_read(&rc->elems)) {
        if (!atomic_read(&fs_info->reada_works_cnt))
            reada_start_machine(fs_info);
        wait_event_timeout(rc->wait, atomic_read(&rc->elems) == 0,
                          (HZ + 9) / 10);
    }
(...)

So the counter "rc->elems" was set to 1 and never decreased to 0, causing
the scrub task to loop forever in that function. Then I used the following
script for drgn to check the readahead requests:

  $ cat dump_reada.py
  import sys
  import drgn
  from drgn import NULL, Object, cast, container_of, execscript, \
      reinterpret, sizeof
  from drgn.helpers.linux import *

  mnt_path = b"/home/fdmanana/btrfs-tests/scratch_1"

  mnt = None
  for mnt in for_each_mount(prog, dst = mnt_path):
      pass

  if mnt is None:
      sys.stderr.write(f'Error: mount point {mnt_path} not found\n')
      sys.exit(1)

  fs_info = cast('struct btrfs_fs_info *', mnt.mnt.mnt_sb.s_fs_info)

  def dump_re(re):
      nzones = re.nzones.value_()
      print(f're at {hex(re.value_())}')
      print(f'\t logical {re.logical.value_()}')
      print(f'\t refcnt {re.refcnt.value_()}')
      print(f'\t nzones {nzones}')
      for i in range(nzones):
          dev = re.zones[i].device
          name = dev.name.str.string_()
          print(f'\t\t dev id {dev.devid.value_()} name {name}')
      print()

  for _, e in radix_tree_for_each(fs_info.reada_tree):
      re = cast('struct reada_extent *', e)
      dump_re(re)

  $ drgn dump_reada.py
  re at 0xffff8f3da9d25ad8
          logical 38928384
          refcnt 1
          nzones 1
                 dev id 0 name b'/dev/sdd'
  $

So there was one readahead extent with a single zone corresponding to the
source device of that last device replace operation logged in dmesg/syslog.
Also the ID of that zone's device was 0 which is a special value set in
the source device of a device replace operation when the operation finishes
(constant BTRFS_DEV_REPLACE_DEVID set at btrfs_dev_replace_finishing()),
confirming again that device /dev/sdd was the source of a device replace
operation.

Normally there should be as many zones in the readahead extent as there are
devices, and I wasn't expecting the extent to be in a block group with a
'single' profile, so I went and confirmed with the following drgn script
that there weren't any single profile block groups:

  $ cat dump_block_groups.py
  import sys
  import drgn
  from drgn import NULL, Object, cast, container_of, execscript, \
      reinterpret, sizeof
  from drgn.helpers.linux import *

  mnt_path = b"/home/fdmanana/btrfs-tests/scratch_1"

  mnt = None
  for mnt in for_each_mount(prog, dst = mnt_path):
      pass

  if mnt is None:
      sys.stderr.write(f'Error: mount point {mnt_path} not found\n')
      sys.exit(1)

  fs_info = cast('struct btrfs_fs_info *', mnt.mnt.mnt_sb.s_fs_info)

  BTRFS_BLOCK_GROUP_DATA = (1 << 0)
  BTRFS_BLOCK_GROUP_SYSTEM = (1 << 1)
  BTRFS_BLOCK_GROUP_METADATA = (1 << 2)
  BTRFS_BLOCK_GROUP_RAID0 = (1 << 3)
  BTRFS_BLOCK_GROUP_RAID1 = (1 << 4)
  BTRFS_BLOCK_GROUP_DUP = (1 << 5)
  BTRFS_BLOCK_GROUP_RAID10 = (1 << 6)
  BTRFS_BLOCK_GROUP_RAID5 = (1 << 7)
  BTRFS_BLOCK_GROUP_RAID6 = (1 << 8)
  BTRFS_BLOCK_GROUP_RAID1C3 = (1 << 9)
  BTRFS_BLOCK_GROUP_RAID1C4 = (1 << 10)

  def bg_flags_string(bg):
      flags = bg.flags.value_()
      ret = ''
      if flags & BTRFS_BLOCK_GROUP_DATA:
          ret = 'data'
      if flags & BTRFS_BLOCK_GROUP_METADATA:
          if len(ret) > 0:
              ret += '|'
          ret += 'meta'
      if flags & BTRFS_BLOCK_GROUP_SYSTEM:
          if len(ret) > 0:
              ret += '|'
          ret += 'system'
      if flags & BTRFS_BLOCK_GROUP_RAID0:
          ret += ' raid0'
      elif flags & BTRFS_BLOCK_GROUP_RAID1:
          ret += ' raid1'
      elif flags & BTRFS_BLOCK_GROUP_DUP:
          ret += ' dup'
      elif flags & BTRFS_BLOCK_GROUP_RAID10:
          ret += ' raid10'
      elif flags & BTRFS_BLOCK_GROUP_RAID5:
          ret += ' raid5'
      elif flags & BTRFS_BLOCK_GROUP_RAID6:
          ret += ' raid6'
      elif flags & BTRFS_BLOCK_GROUP_RAID1C3:
          ret += ' raid1c3'
      elif flags & BTRFS_BLOCK_GROUP_RAID1C4:
          ret += ' raid1c4'
      else:
          ret += ' single'

      return ret

  def dump_bg(bg):
      print()
      print(f'block group at {hex(bg.value_())}')
      print(f'\t start {bg.start.value_()} length {bg.length.value_()}')
      print(f'\t flags {bg.flags.value_()} - {bg_flags_string(bg)}')

  bg_root = fs_info.block_group_cache_tree.address_of_()
  for bg in rbtree_inorder_for_each_entry('struct btrfs_block_group', bg_root, 'cache_node'):
      dump_bg(bg)

  $ drgn dump_block_groups.py

  block group at 0xffff8f3d673b0400
         start 22020096 length 16777216
         flags 258 - system raid6

  block group at 0xffff8f3d53ddb400
         start 38797312 length 536870912
         flags 260 - meta raid6

  block group at 0xffff8f3d5f4d9c00
         start 575668224 length 2147483648
         flags 257 - data raid6

  block group at 0xffff8f3d08189000
         start 2723151872 length 67108864
         flags 258 - system raid6

  block group at 0xffff8f3db70ff000
         start 2790260736 length 1073741824
         flags 260 - meta raid6

  block group at 0xffff8f3d5f4dd800
         start 3864002560 length 67108864
         flags 258 - system raid6

  block group at 0xffff8f3d67037000
         start 3931111424 length 2147483648
         flags 257 - data raid6
  $

So there were only 2 reasons left for having a readahead extent with a
single zone: reada_find_zone(), called when creating a readahead extent,
returned NULL either because we failed to find the corresponding block
group or because a memory allocation failed. With some additional and
custom tracing I figured out that on every further ocurrence of the
problem the block group had just been deleted when we were looping to
create the zones for the readahead extent (at reada_find_extent()), so we
ended up with only one zone in the readahead extent, corresponding to a
device that ends up getting replaced.

So after figuring that out it became obvious why the hang happens:

1) Task A starts a scrub on any device of the filesystem, except for
   device /dev/sdd;

2) Task B starts a device replace with /dev/sdd as the source device;

3) Task A calls btrfs_reada_add() from scrub_stripe() and it is currently
   starting to scrub a stripe from block group X. This call to
   btrfs_reada_add() is the one for the extent tree. When btrfs_reada_add()
   calls reada_add_block(), it passes the logical address of the extent
   tree's root node as its 'logical' argument - a value of 38928384;

4) Task A then enters reada_find_extent(), called from reada_add_block().
   It finds there isn't any existing readahead extent for the logical
   address 38928384, so it proceeds to the path of creating a new one.

   It calls btrfs_map_block() to find out which stripes exist for the block
   group X. On the first iteration of the for loop that iterates over the
   stripes, it finds the stripe for device /dev/sdd, so it creates one
   zone for that device and adds it to the readahead extent. Before getting
   into the second iteration of the loop, the cleanup kthread deletes block
   group X because it was empty. So in the iterations for the remaining
   stripes it does not add more zones to the readahead extent, because the
   calls to reada_find_zone() returned NULL because they couldn't find
   block group X anymore.

   As a result the new readahead extent has a single zone, corresponding to
   the device /dev/sdd;

4) Before task A returns to btrfs_reada_add() and queues the readahead job
   for the readahead work queue, task B finishes the device replace and at
   btrfs_dev_replace_finishing() swaps the device /dev/sdd with the new
   device /dev/sdg;

5) Task A returns to reada_add_block(), which increments the counter
   "->elems" of the reada_control structure allocated at btrfs_reada_add().

   Then it returns back to btrfs_reada_add() and calls
   reada_start_machine(). This queues a job in the readahead work queue to
   run the function reada_start_machine_worker(), which calls
   __reada_start_machine().

   At __reada_start_machine() we take the device list mutex and for each
   device found in the current device list, we call
   reada_start_machine_dev() to start the readahead work. However at this
   point the device /dev/sdd was already freed and is not in the device
   list anymore.

   This means the corresponding readahead for the extent at 38928384 is
   never started, and therefore the "->elems" counter of the reada_control
   structure allocated at btrfs_reada_add() never goes down to 0, causing
   the call to btrfs_reada_wait(), done by the scrub task, to wait forever.

Note that the readahead request can be made either after the device replace
started or before it started, however in pratice it is very unlikely that a
device replace is able to start after a readahead request is made and is
able to complete before the readahead request completes - maybe only on a
very small and nearly empty filesystem.

This hang however is not the only problem we can have with readahead and
device removals. When the readahead extent has other zones other than the
one corresponding to the device that is being removed (either by a device
replace or a device remove operation), we risk having a use-after-free on
the device when dropping the last reference of the readahead extent.

For example if we create a readahead extent with two zones, one for the
device /dev/sdd and one for the device /dev/sde:

1) Before the readahead worker starts, the device /dev/sdd is removed,
   and the corresponding btrfs_device structure is freed. However the
   readahead extent still has the zone pointing to the device structure;

2) When the readahead worker starts, it only finds device /dev/sde in the
   current device list of the filesystem;

3) It starts the readahead work, at reada_start_machine_dev(), using the
   device /dev/sde;

4) Then when it finishes reading the extent from device /dev/sde, it calls
   __readahead_hook() which ends up dropping the last reference on the
   readahead extent through the last call to reada_extent_put();

5) At reada_extent_put() it iterates over each zone of the readahead extent
   and attempts to delete an element from the device's 'reada_extents'
   radix tree, resulting in a use-after-free, as the device pointer of the
   zone for /dev/sdd is now stale. We can also access the device after
   dropping the last reference of a zone, through reada_zone_release(),
   also called by reada_extent_put().

And a device remove suffers the same problem, however since it shrinks the
device size down to zero before removing the device, it is very unlikely to
still have readahead requests not completed by the time we free the device,
the only possibility is if the device has a very little space allocated.

While the hang problem is exclusive to scrub, since it is currently the
only user of btrfs_reada_add() and btrfs_reada_wait(), the use-after-free
problem affects any path that triggers readhead, which includes
btree_readahead_hook() and __readahead_hook() (a readahead worker can
trigger readahed for the children of a node) for example - any path that
ends up calling reada_add_block() can trigger the use-after-free after a
device is removed.

So fix this by waiting for any readahead requests for a device to complete
before removing a device, ensuring that while waiting for existing ones no
new ones can be made.

This problem has been around for a very long time - the readahead code was
added in 2011, device remove exists since 2008 and device replace was
introduced in 2013, hard to pick a specific commit for a git Fixes tag.

CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
scpcom pushed a commit to scpcom/linux that referenced this pull request Feb 6, 2021
@gregkh
dmaengine: pl330: _prep_dma_memcpy: Fix wrong burst size
070a9a0 
[ Upstream commit e773ca7 ]

Actually, burst size is equal to '1 << desc->rqcfg.brst_size'.
we should use burst size, not desc->rqcfg.brst_size.

dma memcpy performance on Rockchip RV1126
@ 1512MHz A7, 1056MHz LPDDR3, 200MHz DMA:

dmatest:

/# echo dma0chan0 > /sys/module/dmatest/parameters/channel
/# echo 4194304 > /sys/module/dmatest/parameters/test_buf_size
/# echo 8 > /sys/module/dmatest/parameters/iterations
/# echo y > /sys/module/dmatest/parameters/norandom
/# echo y > /sys/module/dmatest/parameters/verbose
/# echo 1 > /sys/module/dmatest/parameters/run

dmatest: dma0chan0-copy0: result #1: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000
dmatest: dma0chan0-copy0: result #2: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000
dmatest: dma0chan0-copy0: result #3: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000
dmatest: dma0chan0-copy0: result #4: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000
dmatest: dma0chan0-copy0: result #5: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000
dmatest: dma0chan0-copy0: result #6: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000
dmatest: dma0chan0-copy0: result ayufan-rock64#7: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000
dmatest: dma0chan0-copy0: result ayufan-rock64#8: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000

Before:

  dmatest: dma0chan0-copy0: summary 8 tests, 0 failures 48 iops 200338 KB/s (0)

After this patch:

  dmatest: dma0chan0-copy0: summary 8 tests, 0 failures 179 iops 734873 KB/s (0)

After this patch and increase dma clk to 400MHz:

  dmatest: dma0chan0-copy0: summary 8 tests, 0 failures 259 iops 1062929 KB/s (0)

Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Link: https://lore.kernel.org/r/1605326106-55681-1-git-send-email-sugar.zhang@rock-chips.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
scpcom pushed a commit to scpcom/linux that referenced this pull request Feb 6, 2021
@chenglin130 @gregkh
nfs_common: need lock during iterate through the list
353b195 
[ Upstream commit 4a9d81c ]

If the elem is deleted during be iterated on it, the iteration
process will fall into an endless loop.

kernel: NMI watchdog: BUG: soft lockup - CPU#4 stuck for 22s! [nfsd:17137]

PID: 17137  TASK: ffff8818d93c0000  CPU: 4   COMMAND: "nfsd"
    [exception RIP: __state_in_grace+76]
    RIP: ffffffffc00e817c  RSP: ffff8818d3aefc98  RFLAGS: 00000246
    RAX: ffff881dc0c38298  RBX: ffffffff81b03580  RCX: ffff881dc02c9f50
    RDX: ffff881e3fce8500  RSI: 0000000000000001  RDI: ffffffff81b03580
    RBP: ffff8818d3aefca0   R8: 0000000000000020   R9: ffff8818d3aefd40
    R10: ffff88017fc03800  R11: ffff8818e83933c0  R12: ffff8818d3aefd40
    R13: 0000000000000000  R14: ffff8818e8391068  R15: ffff8818fa6e4000
    CS: 0010  SS: 0018
 #0 [ffff8818d3aefc98] opens_in_grace at ffffffffc00e81e3 [grace]
 #1 [ffff8818d3aefca8] nfs4_preprocess_stateid_op at ffffffffc02a3e6c [nfsd]
 #2 [ffff8818d3aefd18] nfsd4_write at ffffffffc028ed5b [nfsd]
 #3 [ffff8818d3aefd80] nfsd4_proc_compound at ffffffffc0290a0d [nfsd]
 #4 [ffff8818d3aefdd0] nfsd_dispatch at ffffffffc027b800 [nfsd]
 #5 [ffff8818d3aefe08] svc_process_common at ffffffffc02017f3 [sunrpc]
 #6 [ffff8818d3aefe70] svc_process at ffffffffc0201ce3 [sunrpc]
 ayufan-rock64#7 [ffff8818d3aefe98] nfsd at ffffffffc027b117 [nfsd]
 ayufan-rock64#8 [ffff8818d3aefec8] kthread at ffffffff810b88c1
 ayufan-rock64#9 [ffff8818d3aeff50] ret_from_fork at ffffffff816d1607

The troublemake elem:
crash> lock_manager ffff881dc0c38298
struct lock_manager {
  list = {
    next = 0xffff881dc0c38298,
    prev = 0xffff881dc0c38298
  },
  block_opens = false
}

Fixes: c87fb4a ("lockd: NLM grace period shouldn't block NFSv4 opens")
Signed-off-by: Cheng Lin <cheng.lin130@zte.com.cn>
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
scpcom pushed a commit to scpcom/linux that referenced this pull request May 7, 2021
@namhyung @gregkh
perf test: Fix unaligned access in sample parsing test
2062856 
[ Upstream commit c5c97ca ]

The ubsan reported the following error.  It was because sample's raw
data missed u32 padding at the end.  So it broke the alignment of the
array after it.

The raw data contains an u32 size prefix so the data size should have
an u32 padding after 8-byte aligned data.

27: Sample parsing  :util/synthetic-events.c:1539:4:
  runtime error: store to misaligned address 0x62100006b9bc for type
  '__u64' (aka 'unsigned long long'), which requires 8 byte alignment
0x62100006b9bc: note: pointer points here
  00 00 00 00 ff ff ff ff  ff ff ff ff ff ff ff ff  ff ff ff ff ff ff ff ff  ff ff ff ff ff ff ff ff
              ^
    #0 0x561532a9fc96 in perf_event__synthesize_sample util/synthetic-events.c:1539:13
    #1 0x5615327f4a4f in do_test tests/sample-parsing.c:284:8
    #2 0x5615327f3f50 in test__sample_parsing tests/sample-parsing.c:381:9
    #3 0x56153279d3a1 in run_test tests/builtin-test.c:424:9
    #4 0x56153279c836 in test_and_print tests/builtin-test.c:454:9
    #5 0x56153279b7eb in __cmd_test tests/builtin-test.c:675:4
    #6 0x56153279abf0 in cmd_test tests/builtin-test.c:821:9
    ayufan-rock64#7 0x56153264e796 in run_builtin perf.c:312:11
    ayufan-rock64#8 0x56153264cf03 in handle_internal_command perf.c:364:8
    ayufan-rock64#9 0x56153264e47d in run_argv perf.c:408:2
    ayufan-rock64#10 0x56153264c9a9 in main perf.c:538:3
    ayufan-rock64#11 0x7f137ab6fbbc in __libc_start_main (/lib64/libc.so.6+0x38bbc)
    ayufan-rock64#12 0x561532596828 in _start ...

SUMMARY: UndefinedBehaviorSanitizer: misaligned-pointer-use
 util/synthetic-events.c:1539:4 in

Fixes: 045f8cd ("perf tests: Add a sample parsing test")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20210214091638.519643-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
scpcom pushed a commit to scpcom/linux that referenced this pull request May 7, 2021
@gregkh
Bluetooth: Fix null pointer dereference in amp_read_loc_assoc_final_data
7d16e7c 
[ Upstream commit e8bd76e ]

kernel panic trace looks like:

 #5 [ffffb9e08698fc80] do_page_fault at ffffffffb666e0d7
 #6 [ffffb9e08698fcb0] page_fault at ffffffffb70010fe
    [exception RIP: amp_read_loc_assoc_final_data+63]
    RIP: ffffffffc06ab54f  RSP: ffffb9e08698fd68  RFLAGS: 00010246
    RAX: 0000000000000000  RBX: ffff8c8845a5a000  RCX: 0000000000000004
    RDX: 0000000000000000  RSI: ffff8c8b9153d000  RDI: ffff8c8845a5a000
    RBP: ffffb9e08698fe40   R8: 00000000000330e0   R9: ffffffffc0675c94
    R10: ffffb9e08698fe58  R11: 0000000000000001  R12: ffff8c8b9cbf6200
    R13: 0000000000000000  R14: 0000000000000000  R15: ffff8c8b2026da0b
    ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
 ayufan-rock64#7 [ffffb9e08698fda8] hci_event_packet at ffffffffc0676904 [bluetooth]
 ayufan-rock64#8 [ffffb9e08698fe50] hci_rx_work at ffffffffc06629ac [bluetooth]
 ayufan-rock64#9 [ffffb9e08698fe98] process_one_work at ffffffffb66f95e7

hcon->amp_mgr seems NULL triggered kernel panic in following line inside
function amp_read_loc_assoc_final_data

        set_bit(READ_LOC_AMP_ASSOC_FINAL, &mgr->state);

Fixed by checking NULL for mgr.

Signed-off-by: Gopal Tiwari <gtiwari@redhat.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
scpcom pushed a commit to scpcom/linux that referenced this pull request Sep 9, 2021
@wtarreau
reiserfs: Unlock superblock before calling reiserfs_quota_on_mount()
ee89427 
commit 420902c upstream.

If we hold the superblock lock while calling reiserfs_quota_on_mount(), we can
deadlock our own worker - mount blocks kworker/3:2, sleeps forever more.

crash> ps|grep UN
    715      2   3  ffff880220734d30  UN   0.0       0      0  [kworker/3:2]
   9369   9341   2  ffff88021ffb7560  UN   1.3  493404 123184  Xorg
   9665   9664   3  ffff880225b92ab0  UN   0.0   47368    812  udisks-daemon
  10635  10403   3  ffff880222f22c70  UN   0.0   14904    936  mount
crash> bt ffff880220734d30
PID: 715    TASK: ffff880220734d30  CPU: 3   COMMAND: "kworker/3:2"
 #0 [ffff8802244c3c20] schedule at ffffffff8144584b
 #1 [ffff8802244c3cc8] __rt_mutex_slowlock at ffffffff814472b3
 #2 [ffff8802244c3d28] rt_mutex_slowlock at ffffffff814473f5
 #3 [ffff8802244c3dc8] reiserfs_write_lock at ffffffffa05f28fd [reiserfs]
 #4 [ffff8802244c3de8] flush_async_commits at ffffffffa05ec91d [reiserfs]
 #5 [ffff8802244c3e08] process_one_work at ffffffff81073726
 #6 [ffff8802244c3e68] worker_thread at ffffffff81073eba
 ayufan-rock64#7 [ffff8802244c3ec8] kthread at ffffffff810782e0
 ayufan-rock64#8 [ffff8802244c3f48] kernel_thread_helper at ffffffff81450064
crash> rd ffff8802244c3cc8 10
ffff8802244c3cc8:  ffffffff814472b3 ffff880222f23250   .rD.....P2."....
ffff8802244c3cd8:  0000000000000000 0000000000000286   ................
ffff8802244c3ce8:  ffff8802244c3d30 ffff880220734d80   0=L$.....Ms ....
ffff8802244c3cf8:  ffff880222e8f628 0000000000000000   (.."............
ffff8802244c3d08:  0000000000000000 0000000000000002   ................
crash> struct rt_mutex ffff880222e8f628
struct rt_mutex {
  wait_lock = {
    raw_lock = {
      slock = 65537
    }
  },
  wait_list = {
    node_list = {
      next = 0xffff8802244c3d48,
      prev = 0xffff8802244c3d48
    }
  },
  owner = 0xffff880222f22c71,
  save_state = 0
}
crash> bt 0xffff880222f22c70
PID: 10635  TASK: ffff880222f22c70  CPU: 3   COMMAND: "mount"
 #0 [ffff8802216a9868] schedule at ffffffff8144584b
 #1 [ffff8802216a9910] schedule_timeout at ffffffff81446865
 #2 [ffff8802216a99a0] wait_for_common at ffffffff81445f74
 #3 [ffff8802216a9a30] flush_work at ffffffff810712d3
 #4 [ffff8802216a9ab0] schedule_on_each_cpu at ffffffff81074463
 #5 [ffff8802216a9ae0] invalidate_bdev at ffffffff81178aba
 #6 [ffff8802216a9af0] vfs_load_quota_inode at ffffffff811a3632
 ayufan-rock64#7 [ffff8802216a9b50] dquot_quota_on_mount at ffffffff811a375c
 ayufan-rock64#8 [ffff8802216a9b80] finish_unfinished at ffffffffa05dd8b0 [reiserfs]
 ayufan-rock64#9 [ffff8802216a9cc0] reiserfs_fill_super at ffffffffa05de825 [reiserfs]
    RIP: 00007f7b9303997a  RSP: 00007ffff443c7a8  RFLAGS: 00010202
    RAX: 00000000000000a5  RBX: ffffffff8144ef12  RCX: 00007f7b932e9ee0
    RDX: 00007f7b93d9a400  RSI: 00007f7b93d9a3e0  RDI: 00007f7b93d9a3c0
    RBP: 00007f7b93d9a2c0   R8: 00007f7b93d9a550   R9: 0000000000000001
    R10: ffffffffc0ed040e  R11: 0000000000000202  R12: 000000000000040e
    R13: 0000000000000000  R14: 00000000c0ed040e  R15: 00007ffff443ca20
    ORIG_RAX: 00000000000000a5  CS: 0033  SS: 002b

Signed-off-by: Mike Galbraith <efault@gmx.de>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Mike Galbraith <mgalbraith@suse.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Willy Tarreau <w@1wt.eu>
scpcom pushed a commit to scpcom/linux that referenced this pull request Sep 9, 2021
@wtarreau
ocfs2: fix BUG_ON() in ocfs2_ci_checkpointed()
1918581 
commit 3d46a44 upstream.

PID: 614    TASK: ffff882a739da580  CPU: 3   COMMAND: "ocfs2dc"
  #0 [ffff882ecc3759b0] machine_kexec at ffffffff8103b35d
  #1 [ffff882ecc375a20] crash_kexec at ffffffff810b95b5
  #2 [ffff882ecc375af0] oops_end at ffffffff815091d8
  #3 [ffff882ecc375b20] die at ffffffff8101868b
  #4 [ffff882ecc375b50] do_trap at ffffffff81508bb0
  #5 [ffff882ecc375ba0] do_invalid_op at ffffffff810165e5
  #6 [ffff882ecc375c40] invalid_op at ffffffff815116fb
     [exception RIP: ocfs2_ci_checkpointed+208]
     RIP: ffffffffa0a7e940  RSP: ffff882ecc375cf0  RFLAGS: 00010002
     RAX: 0000000000000001  RBX: 000000000000654b  RCX: ffff8812dc83f1f8
     RDX: 00000000000017d9  RSI: ffff8812dc83f1f8  RDI: ffffffffa0b2c318
     RBP: ffff882ecc375d20   R8: ffff882ef6ecfa60   R9: ffff88301f272200
     R10: 0000000000000000  R11: 0000000000000000  R12: ffffffffffffffff
     R13: ffff8812dc83f4f0  R14: 0000000000000000  R15: ffff8812dc83f1f8
     ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
  ayufan-rock64#7 [ffff882ecc375d28] ocfs2_check_meta_downconvert at ffffffffa0a7edbd [ocfs2]
  ayufan-rock64#8 [ffff882ecc375d38] ocfs2_unblock_lock at ffffffffa0a84af8 [ocfs2]
  ayufan-rock64#9 [ffff882ecc375dc8] ocfs2_process_blocked_lock at ffffffffa0a85285 [ocfs2]
assert is tripped because the tran is not checkpointed and the lock level is PR.

Some time ago, chmod command had been executed. As result, the following call
chain left the inode cluster lock in PR state, latter on causing the assert.
system_call_fastpath
  -> my_chmod
   -> sys_chmod
    -> sys_fchmodat
     -> notify_change
      -> ocfs2_setattr
       -> posix_acl_chmod
        -> ocfs2_iop_set_acl
         -> ocfs2_set_acl
          -> ocfs2_acl_set_mode
Here is how.
1119 int ocfs2_setattr(struct dentry *dentry, struct iattr *attr)
1120 {
1247         ocfs2_inode_unlock(inode, 1); <<< WRONG thing to do.
..
1258         if (!status && attr->ia_valid & ATTR_MODE) {
1259                 status =  posix_acl_chmod(inode, inode->i_mode);

519 posix_acl_chmod(struct inode *inode, umode_t mode)
520 {
..
539         ret = inode->i_op->set_acl(inode, acl, ACL_TYPE_ACCESS);

287 int ocfs2_iop_set_acl(struct inode *inode, struct posix_acl *acl, ...
288 {
289         return ocfs2_set_acl(NULL, inode, NULL, type, acl, NULL, NULL);

224 int ocfs2_set_acl(handle_t *handle,
225                          struct inode *inode, ...
231 {
..
252                                 ret = ocfs2_acl_set_mode(inode, di_bh,
253                                                          handle, mode);

168 static int ocfs2_acl_set_mode(struct inode *inode, struct buffer_head ...
170 {
183         if (handle == NULL) {
                    >>> BUG: inode lock not held in ex at this point <<<
184                 handle = ocfs2_start_trans(OCFS2_SB(inode->i_sb),
185                                            OCFS2_INODE_UPDATE_CREDITS);

ocfs2_setattr.#1247 we unlock and at #1259 call posix_acl_chmod. When we reach
ocfs2_acl_set_mode.rockchip-linux#181 and do trans, the inode cluster lock is not held in EX
mode (it should be). How this could have happended?

We are the lock master, were holding lock EX and have released it in
ocfs2_setattr.#1247.  Note that there are no holders of this lock at
this point.  Another node needs the lock in PR, and we downconvert from
EX to PR.  So the inode lock is PR when do the trans in
ocfs2_acl_set_mode.rockchip-linux#184.  The trans stays in core (not flushed to disc).
Now another node want the lock in EX, downconvert thread gets kicked
(the one that tripped assert abovt), finds an unflushed trans but the
lock is not EX (it is PR).  If the lock was at EX, it would have flushed
the trans ocfs2_ci_checkpointed -> ocfs2_start_checkpoint before
downconverting (to NULL) for the request.

ocfs2_setattr must not drop inode lock ex in this code path.  If it
does, takes it again before the trans, say in ocfs2_set_acl, another
cluster node can get in between, execute another setattr, overwriting
the one in progress on this node, resulting in a mode acl size combo
that is a mix of the two.

Orabug: 20189959
Signed-off-by: Tariq Saeed <tariq.x.saeed@oracle.com>
Reviewed-by: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Joseph Qi <joseph.qi@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
scpcom pushed a commit to scpcom/linux that referenced this pull request Nov 19, 2024
@Manciukic @gregkh
perf session: Add missing evlist__delete when deleting a session
83aa0c9 
commit cf96b8e upstream.

ASan reports a memory leak caused by evlist not being deleted on exit in
perf-report, perf-script and perf-data.
The problem is caused by evlist->session not being deleted, which is
allocated in perf_session__read_header, called in perf_session__new if
perf_data is in read mode.
In case of write mode, the session->evlist is filled by the caller.
This patch solves the problem by calling evlist__delete in
perf_session__delete if perf_data is in read mode.

Changes in v2:
 - call evlist__delete from within perf_session__delete

v1: https://lore.kernel.org/lkml/20210621234317.235545-1-rickyman7@gmail.com/

ASan report follows:

$ ./perf script report flamegraph
=================================================================
==227640==ERROR: LeakSanitizer: detected memory leaks

<SNIP unrelated>

Indirect leak of 2704 byte(s) in 1 object(s) allocated from:
    #0 0x4f4137 in calloc (/home/user/linux/tools/perf/perf+0x4f4137)
    #1 0xbe3d56 in zalloc /home/user/linux/tools/lib/perf/../../lib/zalloc.c:8:9
    #2 0x7f999e in evlist__new /home/user/linux/tools/perf/util/evlist.c:77:26
    #3 0x8ad938 in perf_session__read_header /home/user/linux/tools/perf/util/header.c:3797:20
    #4 0x8ec714 in perf_session__open /home/user/linux/tools/perf/util/session.c:109:6
    #5 0x8ebe83 in perf_session__new /home/user/linux/tools/perf/util/session.c:213:10
    #6 0x60c6de in cmd_script /home/user/linux/tools/perf/builtin-script.c:3856:12
    ayufan-rock64#7 0x7b2930 in run_builtin /home/user/linux/tools/perf/perf.c:313:11
    ayufan-rock64#8 0x7b120f in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8
    ayufan-rock64#9 0x7b2493 in run_argv /home/user/linux/tools/perf/perf.c:409:2
    ayufan-rock64#10 0x7b0c89 in main /home/user/linux/tools/perf/perf.c:539:3
    ayufan-rock64#11 0x7f5260654b74  (/lib64/libc.so.6+0x27b74)

Indirect leak of 568 byte(s) in 1 object(s) allocated from:
    #0 0x4f4137 in calloc (/home/user/linux/tools/perf/perf+0x4f4137)
    #1 0xbe3d56 in zalloc /home/user/linux/tools/lib/perf/../../lib/zalloc.c:8:9
    #2 0x80ce88 in evsel__new_idx /home/user/linux/tools/perf/util/evsel.c:268:24
    #3 0x8aed93 in evsel__new /home/user/linux/tools/perf/util/evsel.h:210:9
    #4 0x8ae07e in perf_session__read_header /home/user/linux/tools/perf/util/header.c:3853:11
    #5 0x8ec714 in perf_session__open /home/user/linux/tools/perf/util/session.c:109:6
    #6 0x8ebe83 in perf_session__new /home/user/linux/tools/perf/util/session.c:213:10
    ayufan-rock64#7 0x60c6de in cmd_script /home/user/linux/tools/perf/builtin-script.c:3856:12
    ayufan-rock64#8 0x7b2930 in run_builtin /home/user/linux/tools/perf/perf.c:313:11
    ayufan-rock64#9 0x7b120f in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8
    ayufan-rock64#10 0x7b2493 in run_argv /home/user/linux/tools/perf/perf.c:409:2
    ayufan-rock64#11 0x7b0c89 in main /home/user/linux/tools/perf/perf.c:539:3
    ayufan-rock64#12 0x7f5260654b74  (/lib64/libc.so.6+0x27b74)

Indirect leak of 264 byte(s) in 1 object(s) allocated from:
    #0 0x4f4137 in calloc (/home/user/linux/tools/perf/perf+0x4f4137)
    #1 0xbe3d56 in zalloc /home/user/linux/tools/lib/perf/../../lib/zalloc.c:8:9
    #2 0xbe3e70 in xyarray__new /home/user/linux/tools/lib/perf/xyarray.c:10:23
    #3 0xbd7754 in perf_evsel__alloc_id /home/user/linux/tools/lib/perf/evsel.c:361:21
    #4 0x8ae201 in perf_session__read_header /home/user/linux/tools/perf/util/header.c:3871:7
    #5 0x8ec714 in perf_session__open /home/user/linux/tools/perf/util/session.c:109:6
    #6 0x8ebe83 in perf_session__new /home/user/linux/tools/perf/util/session.c:213:10
    ayufan-rock64#7 0x60c6de in cmd_script /home/user/linux/tools/perf/builtin-script.c:3856:12
    ayufan-rock64#8 0x7b2930 in run_builtin /home/user/linux/tools/perf/perf.c:313:11
    ayufan-rock64#9 0x7b120f in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8
    ayufan-rock64#10 0x7b2493 in run_argv /home/user/linux/tools/perf/perf.c:409:2
    ayufan-rock64#11 0x7b0c89 in main /home/user/linux/tools/perf/perf.c:539:3
    ayufan-rock64#12 0x7f5260654b74  (/lib64/libc.so.6+0x27b74)

Indirect leak of 32 byte(s) in 1 object(s) allocated from:
    #0 0x4f4137 in calloc (/home/user/linux/tools/perf/perf+0x4f4137)
    #1 0xbe3d56 in zalloc /home/user/linux/tools/lib/perf/../../lib/zalloc.c:8:9
    #2 0xbd77e0 in perf_evsel__alloc_id /home/user/linux/tools/lib/perf/evsel.c:365:14
    #3 0x8ae201 in perf_session__read_header /home/user/linux/tools/perf/util/header.c:3871:7
    #4 0x8ec714 in perf_session__open /home/user/linux/tools/perf/util/session.c:109:6
    #5 0x8ebe83 in perf_session__new /home/user/linux/tools/perf/util/session.c:213:10
    #6 0x60c6de in cmd_script /home/user/linux/tools/perf/builtin-script.c:3856:12
    ayufan-rock64#7 0x7b2930 in run_builtin /home/user/linux/tools/perf/perf.c:313:11
    ayufan-rock64#8 0x7b120f in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8
    ayufan-rock64#9 0x7b2493 in run_argv /home/user/linux/tools/perf/perf.c:409:2
    ayufan-rock64#10 0x7b0c89 in main /home/user/linux/tools/perf/perf.c:539:3
    ayufan-rock64#11 0x7f5260654b74  (/lib64/libc.so.6+0x27b74)

Indirect leak of 7 byte(s) in 1 object(s) allocated from:
    #0 0x4b8207 in strdup (/home/user/linux/tools/perf/perf+0x4b8207)
    #1 0x8b4459 in evlist__set_event_name /home/user/linux/tools/perf/util/header.c:2292:16
    #2 0x89d862 in process_event_desc /home/user/linux/tools/perf/util/header.c:2313:3
    #3 0x8af319 in perf_file_section__process /home/user/linux/tools/perf/util/header.c:3651:9
    #4 0x8aa6e9 in perf_header__process_sections /home/user/linux/tools/perf/util/header.c:3427:9
    #5 0x8ae3e7 in perf_session__read_header /home/user/linux/tools/perf/util/header.c:3886:2
    #6 0x8ec714 in perf_session__open /home/user/linux/tools/perf/util/session.c:109:6
    ayufan-rock64#7 0x8ebe83 in perf_session__new /home/user/linux/tools/perf/util/session.c:213:10
    ayufan-rock64#8 0x60c6de in cmd_script /home/user/linux/tools/perf/builtin-script.c:3856:12
    ayufan-rock64#9 0x7b2930 in run_builtin /home/user/linux/tools/perf/perf.c:313:11
    ayufan-rock64#10 0x7b120f in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8
    ayufan-rock64#11 0x7b2493 in run_argv /home/user/linux/tools/perf/perf.c:409:2
    ayufan-rock64#12 0x7b0c89 in main /home/user/linux/tools/perf/perf.c:539:3
    ayufan-rock64#13 0x7f5260654b74  (/lib64/libc.so.6+0x27b74)

SUMMARY: AddressSanitizer: 3728 byte(s) leaked in 7 allocation(s).

Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210624231926.212208-1-rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: stable@vger.kernel.org # 5.10.228
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
scpcom pushed a commit to scpcom/linux that referenced this pull request Nov 20, 2024
@gregkh
Revert "wifi: cfg80211: check wiphy mutex is held for wdev mutex"
e0f6749 
This reverts commit 89795ee which is
commmit 1474bc8 upstream.

The reverted commit is based on implementation of wiphy locking that isn't
planned to redo on a stable kernel, so revert it to avoid warning:

 WARNING: CPU: 0 PID: 9 at net/wireless/core.h:231 disconnect_work+0xb8/0x144 [cfg80211]
 CPU: 0 PID: 9 Comm: kworker/0:1 Not tainted 6.6.51-00141-ga1649b6f8ed6 ayufan-rock64#7
 Hardware name: Freescale i.MX6 SoloX (Device Tree)
 Workqueue: events disconnect_work [cfg80211]
  unwind_backtrace from show_stack+0x10/0x14
  show_stack from dump_stack_lvl+0x58/0x70
  dump_stack_lvl from __warn+0x70/0x1c0
  __warn from warn_slowpath_fmt+0x16c/0x294
  warn_slowpath_fmt from disconnect_work+0xb8/0x144 [cfg80211]
  disconnect_work [cfg80211] from process_one_work+0x204/0x620
  process_one_work from worker_thread+0x1b0/0x474
  worker_thread from kthread+0x10c/0x12c
  kthread from ret_from_fork+0x14/0x24

Reported-by: petter@technux.se
Closes: https://lore.kernel.org/linux-wireless/9e98937d781c990615ef27ee0c858ff9@technux.se/T/#t
Cc: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
scpcom pushed a commit to scpcom/linux that referenced this pull request Nov 20, 2024
@mfleming @gregkh
perf hist: Update hist symbol when updating maps
fdb6429 
commit ac01c8c upstream.

AddressSanitizer found a use-after-free bug in the symbol code which
manifested as 'perf top' segfaulting.

  ==1238389==ERROR: AddressSanitizer: heap-use-after-free on address 0x60b00c48844b at pc 0x5650d8035961 bp 0x7f751aaecc90 sp 0x7f751aaecc80
  READ of size 1 at 0x60b00c48844b thread T193
      #0 0x5650d8035960 in _sort__sym_cmp util/sort.c:310
      #1 0x5650d8043744 in hist_entry__cmp util/hist.c:1286
      #2 0x5650d8043951 in hists__findnew_entry util/hist.c:614
      #3 0x5650d804568f in __hists__add_entry util/hist.c:754
      #4 0x5650d8045bf9 in hists__add_entry util/hist.c:772
      #5 0x5650d8045df1 in iter_add_single_normal_entry util/hist.c:997
      #6 0x5650d8043326 in hist_entry_iter__add util/hist.c:1242
      ayufan-rock64#7 0x5650d7ceeefe in perf_event__process_sample /home/matt/src/linux/tools/perf/builtin-top.c:845
      ayufan-rock64#8 0x5650d7ceeefe in deliver_event /home/matt/src/linux/tools/perf/builtin-top.c:1208
      ayufan-rock64#9 0x5650d7fdb51b in do_flush util/ordered-events.c:245
      ayufan-rock64#10 0x5650d7fdb51b in __ordered_events__flush util/ordered-events.c:324
      ayufan-rock64#11 0x5650d7ced743 in process_thread /home/matt/src/linux/tools/perf/builtin-top.c:1120
      ayufan-rock64#12 0x7f757ef1f133 in start_thread nptl/pthread_create.c:442
      ayufan-rock64#13 0x7f757ef9f7db in clone3 ../sysdeps/unix/sysv/linux/x86_64/clone3.S:81

When updating hist maps it's also necessary to update the hist symbol
reference because the old one gets freed in map__put().

While this bug was probably introduced with 5c24b67 ("perf
tools: Replace map->referenced & maps->removed_maps with map->refcnt"),
the symbol objects were leaked until c087e94 ("perf machine:
Fix refcount usage when processing PERF_RECORD_KSYMBOL") was merged so
the bug was masked.

Fixes: c087e94 ("perf machine: Fix refcount usage when processing PERF_RECORD_KSYMBOL")
Reported-by: Yunzhao Li <yunzhao@cloudflare.com>
Signed-off-by: Matt Fleming (Cloudflare) <matt@readmodwrite.com>
Cc: Ian Rogers <irogers@google.com>
Cc: kernel-team@cloudflare.com
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: stable@vger.kernel.org # v5.13+
Link: https://lore.kernel.org/r/20240815142212.3834625-1-matt@readmodwrite.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
scpcom pushed a commit to scpcom/linux that referenced this pull request Nov 20, 2024
@namhyung @gregkh
perf report: Fix segfault when 'sym' sort key is not used
a716779 
commit 9af2efe upstream.

The fields in the hist_entry are filled on-demand which means they only
have meaningful values when relevant sort keys are used.

So if neither of 'dso' nor 'sym' sort keys are used, the map/symbols in
the hist entry can be garbage.  So it shouldn't access it
unconditionally.

I got a segfault, when I wanted to see cgroup profiles.

  $ sudo perf record -a --all-cgroups --synth=cgroup true

  $ sudo perf report -s cgroup

  Program received signal SIGSEGV, Segmentation fault.
  0x00005555557a8d90 in map__dso (map=0x0) at util/map.h:48
  48		return RC_CHK_ACCESS(map)->dso;
  (gdb) bt
  #0  0x00005555557a8d90 in map__dso (map=0x0) at util/map.h:48
  #1  0x00005555557aa39b in map__load (map=0x0) at util/map.c:344
  #2  0x00005555557aa592 in map__find_symbol (map=0x0, addr=140736115941088) at util/map.c:385
  #3  0x00005555557ef000 in hists__findnew_entry (hists=0x555556039d60, entry=0x7fffffffa4c0, al=0x7fffffffa8c0, sample_self=true)
      at util/hist.c:644
  #4  0x00005555557ef61c in __hists__add_entry (hists=0x555556039d60, al=0x7fffffffa8c0, sym_parent=0x0, bi=0x0, mi=0x0, ki=0x0,
      block_info=0x0, sample=0x7fffffffaa90, sample_self=true, ops=0x0) at util/hist.c:761
  #5  0x00005555557ef71f in hists__add_entry (hists=0x555556039d60, al=0x7fffffffa8c0, sym_parent=0x0, bi=0x0, mi=0x0, ki=0x0,
      sample=0x7fffffffaa90, sample_self=true) at util/hist.c:779
  #6  0x00005555557f00fb in iter_add_single_normal_entry (iter=0x7fffffffa900, al=0x7fffffffa8c0) at util/hist.c:1015
  ayufan-rock64#7  0x00005555557f09a7 in hist_entry_iter__add (iter=0x7fffffffa900, al=0x7fffffffa8c0, max_stack_depth=127, arg=0x7fffffffbce0)
      at util/hist.c:1260
  ayufan-rock64#8  0x00005555555ba7ce in process_sample_event (tool=0x7fffffffbce0, event=0x7ffff7c14128, sample=0x7fffffffaa90, evsel=0x555556039ad0,
      machine=0x5555560388e8) at builtin-report.c:334
  ayufan-rock64#9  0x00005555557b30c8 in evlist__deliver_sample (evlist=0x555556039010, tool=0x7fffffffbce0, event=0x7ffff7c14128,
      sample=0x7fffffffaa90, evsel=0x555556039ad0, machine=0x5555560388e8) at util/session.c:1232
  ayufan-rock64#10 0x00005555557b32bc in machines__deliver_event (machines=0x5555560388e8, evlist=0x555556039010, event=0x7ffff7c14128,
      sample=0x7fffffffaa90, tool=0x7fffffffbce0, file_offset=110888, file_path=0x555556038ff0 "perf.data") at util/session.c:1271
  ayufan-rock64#11 0x00005555557b3848 in perf_session__deliver_event (session=0x5555560386d0, event=0x7ffff7c14128, tool=0x7fffffffbce0,
      file_offset=110888, file_path=0x555556038ff0 "perf.data") at util/session.c:1354
  ayufan-rock64#12 0x00005555557affaf in ordered_events__deliver_event (oe=0x555556038e60, event=0x555556135aa0) at util/session.c:132
  ayufan-rock64#13 0x00005555557bb605 in do_flush (oe=0x555556038e60, show_progress=false) at util/ordered-events.c:245
  ayufan-rock64#14 0x00005555557bb95c in __ordered_events__flush (oe=0x555556038e60, how=OE_FLUSH__ROUND, timestamp=0) at util/ordered-events.c:324
  ayufan-rock64#15 0x00005555557bba46 in ordered_events__flush (oe=0x555556038e60, how=OE_FLUSH__ROUND) at util/ordered-events.c:342
  ayufan-rock64#16 0x00005555557b1b3b in perf_event__process_finished_round (tool=0x7fffffffbce0, event=0x7ffff7c15bb8, oe=0x555556038e60)
      at util/session.c:780
  ayufan-rock64#17 0x00005555557b3b27 in perf_session__process_user_event (session=0x5555560386d0, event=0x7ffff7c15bb8, file_offset=117688,
      file_path=0x555556038ff0 "perf.data") at util/session.c:1406

As you can see the entry->ms.map was NULL even if he->ms.map has a
value.  This is because 'sym' sort key is not given, so it cannot assume
whether he->ms.sym and entry->ms.sym is the same.  I only checked the
'sym' sort key here as it implies 'dso' behavior (so maps are the same).

Fixes: ac01c8c ("perf hist: Update hist symbol when updating maps")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Matt Fleming <matt@readmodwrite.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240826221045.1202305-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
scpcom pushed a commit to scpcom/linux that referenced this pull request Nov 20, 2024
@gregkh
NFSv4: Prevent NULL-pointer dereference in nfs42_complete_copies()
584c019 
[ Upstream commit a848c29 ]

On the node of an NFS client, some files saved in the mountpoint of the
NFS server were copied to another location of the same NFS server.
Accidentally, the nfs42_complete_copies() got a NULL-pointer dereference
crash with the following syslog:

[232064.838881] NFSv4: state recovery failed for open file nfs/pvc-12b5200d-cd0f-46a3-b9f0-af8f4fe0ef64.qcow2, error = -116
[232064.839360] NFSv4: state recovery failed for open file nfs/pvc-12b5200d-cd0f-46a3-b9f0-af8f4fe0ef64.qcow2, error = -116
[232066.588183] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000058
[232066.588586] Mem abort info:
[232066.588701]   ESR = 0x0000000096000007
[232066.588862]   EC = 0x25: DABT (current EL), IL = 32 bits
[232066.589084]   SET = 0, FnV = 0
[232066.589216]   EA = 0, S1PTW = 0
[232066.589340]   FSC = 0x07: level 3 translation fault
[232066.589559] Data abort info:
[232066.589683]   ISV = 0, ISS = 0x00000007
[232066.589842]   CM = 0, WnR = 0
[232066.589967] user pgtable: 64k pages, 48-bit VAs, pgdp=00002000956ff400
[232066.590231] [0000000000000058] pgd=08001100ae100003, p4d=08001100ae100003, pud=08001100ae100003, pmd=08001100b3c00003, pte=0000000000000000
[232066.590757] Internal error: Oops: 96000007 [#1] SMP
[232066.590958] Modules linked in: rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm vhost_net vhost vhost_iotlb tap tun ipt_rpfilter xt_multiport ip_set_hash_ip ip_set_hash_net xfrm_interface xfrm6_tunnel tunnel4 tunnel6 esp4 ah4 wireguard libcurve25519_generic veth xt_addrtype xt_set nf_conntrack_netlink ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_bitmap_port ip_set_hash_ipport dummy ip_set ip_vs_sh ip_vs_wrr ip_vs_rr ip_vs iptable_filter sch_ingress nfnetlink_cttimeout vport_gre ip_gre ip_tunnel gre vport_geneve geneve vport_vxlan vxlan ip6_udp_tunnel udp_tunnel openvswitch nf_conncount dm_round_robin dm_service_time dm_multipath xt_nat xt_MASQUERADE nft_chain_nat nf_nat xt_mark xt_conntrack xt_comment nft_compat nft_counter nf_tables nfnetlink ocfs2 ocfs2_nodemanager ocfs2_stackglue iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ipmi_ssif nbd overlay 8021q garp mrp bonding tls rfkill sunrpc ext4 mbcache jbd2
[232066.591052]  vfat fat cas_cache cas_disk ses enclosure scsi_transport_sas sg acpi_ipmi ipmi_si ipmi_devintf ipmi_msghandler ip_tables vfio_pci vfio_pci_core vfio_virqfd vfio_iommu_type1 vfio dm_mirror dm_region_hash dm_log dm_mod nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 br_netfilter bridge stp llc fuse xfs libcrc32c ast drm_vram_helper qla2xxx drm_kms_helper syscopyarea crct10dif_ce sysfillrect ghash_ce sysimgblt sha2_ce fb_sys_fops cec sha256_arm64 sha1_ce drm_ttm_helper ttm nvme_fc igb sbsa_gwdt nvme_fabrics drm nvme_core i2c_algo_bit i40e scsi_transport_fc megaraid_sas aes_neon_bs
[232066.596953] CPU: 6 PID: 4124696 Comm: 10.253.166.125- Kdump: loaded Not tainted 5.15.131-9.cl9_ocfs2.aarch64 #1
[232066.597356] Hardware name: Great Wall .\x93\x8e...RF6260 V5/GWMSSE2GL1T, BIOS T656FBE_V3.0.18 2024-01-06
[232066.597721] pstate: 20400009 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[232066.598034] pc : nfs4_reclaim_open_state+0x220/0x800 [nfsv4]
[232066.598327] lr : nfs4_reclaim_open_state+0x12c/0x800 [nfsv4]
[232066.598595] sp : ffff8000f568fc70
[232066.598731] x29: ffff8000f568fc70 x28: 0000000000001000 x27: ffff21003db33000
[232066.599030] x26: ffff800005521ae0 x25: ffff0100f98fa3f0 x24: 0000000000000001
[232066.599319] x23: ffff800009920008 x22: ffff21003db33040 x21: ffff21003db33050
[232066.599628] x20: ffff410172fe9e40 x19: ffff410172fe9e00 x18: 0000000000000000
[232066.599914] x17: 0000000000000000 x16: 0000000000000004 x15: 0000000000000000
[232066.600195] x14: 0000000000000000 x13: ffff800008e685a8 x12: 00000000eac0c6e6
[232066.600498] x11: 0000000000000000 x10: 0000000000000008 x9 : ffff8000054e5828
[232066.600784] x8 : 00000000ffffffbf x7 : 0000000000000001 x6 : 000000000a9eb14a
[232066.601062] x5 : 0000000000000000 x4 : ffff70ff8a14a800 x3 : 0000000000000058
[232066.601348] x2 : 0000000000000001 x1 : 54dce46366daa6c6 x0 : 0000000000000000
[232066.601636] Call trace:
[232066.601749]  nfs4_reclaim_open_state+0x220/0x800 [nfsv4]
[232066.601998]  nfs4_do_reclaim+0x1b8/0x28c [nfsv4]
[232066.602218]  nfs4_state_manager+0x928/0x10f0 [nfsv4]
[232066.602455]  nfs4_run_state_manager+0x78/0x1b0 [nfsv4]
[232066.602690]  kthread+0x110/0x114
[232066.602830]  ret_from_fork+0x10/0x20
[232066.602985] Code: 1400000d f9403f20 f9402e61 91016003 (f9402c00)
[232066.603284] SMP: stopping secondary CPUs
[232066.606936] Starting crashdump kernel...
[232066.607146] Bye!

Analysing the vmcore, we know that nfs4_copy_state listed by destination
nfs_server->ss_copies was added by the field copies in handle_async_copy(),
and we found a waiting copy process with the stack as:
PID: 3511963  TASK: ffff710028b47e00  CPU: 0   COMMAND: "cp"
 #0 [ffff8001116ef740] __switch_to at ffff8000081b92f4
 #1 [ffff8001116ef760] __schedule at ffff800008dd0650
 #2 [ffff8001116ef7c0] schedule at ffff800008dd0a00
 #3 [ffff8001116ef7e0] schedule_timeout at ffff800008dd6aa0
 #4 [ffff8001116ef860] __wait_for_common at ffff800008dd166c
 #5 [ffff8001116ef8e0] wait_for_completion_interruptible at ffff800008dd1898
 #6 [ffff8001116ef8f0] handle_async_copy at ffff8000055142f4 [nfsv4]
 ayufan-rock64#7 [ffff8001116ef970] _nfs42_proc_copy at ffff8000055147c8 [nfsv4]
 ayufan-rock64#8 [ffff8001116efa80] nfs42_proc_copy at ffff800005514cf0 [nfsv4]
 ayufan-rock64#9 [ffff8001116efc50] __nfs4_copy_file_range.constprop.0 at ffff8000054ed694 [nfsv4]

The NULL-pointer dereference was due to nfs42_complete_copies() listed
the nfs_server->ss_copies by the field ss_copies of nfs4_copy_state.
So the nfs4_copy_state address ffff0100f98fa3f0 was offset by 0x10 and
the data accessed through this pointer was also incorrect. Generally,
the ordered list nfs4_state_owner->so_states indicate open(O_RDWR) or
open(O_WRITE) states are reclaimed firstly by nfs4_reclaim_open_state().
When destination state reclaim is failed with NFS_STATE_RECOVERY_FAILED
and copies are not deleted in nfs_server->ss_copies, the source state
may be passed to the nfs42_complete_copies() process earlier, resulting
in this crash scene finally. To solve this issue, we add a list_head
nfs_server->ss_src_copies for a server-to-server copy specially.

Fixes: 0e65a32 ("NFS: handle source server reboot")
Signed-off-by: Yanjun Zhang <zhangyanjun@cestc.cn>
Reviewed-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
scpcom pushed a commit to scpcom/linux that referenced this pull request Nov 20, 2024
@gregkh
Revert "wifi: cfg80211: check wiphy mutex is held for wdev mutex"
e388656 
This reverts commit 19d13ec which is
commmit 1474bc8 upstream.

The reverted commit is based on implementation of wiphy locking that isn't
planned to redo on a stable kernel, so revert it to avoid warning:

 WARNING: CPU: 0 PID: 9 at net/wireless/core.h:231 disconnect_work+0xb8/0x144 [cfg80211]
 CPU: 0 PID: 9 Comm: kworker/0:1 Not tainted 6.6.51-00141-ga1649b6f8ed6 ayufan-rock64#7
 Hardware name: Freescale i.MX6 SoloX (Device Tree)
 Workqueue: events disconnect_work [cfg80211]
  unwind_backtrace from show_stack+0x10/0x14
  show_stack from dump_stack_lvl+0x58/0x70
  dump_stack_lvl from __warn+0x70/0x1c0
  __warn from warn_slowpath_fmt+0x16c/0x294
  warn_slowpath_fmt from disconnect_work+0xb8/0x144 [cfg80211]
  disconnect_work [cfg80211] from process_one_work+0x204/0x620
  process_one_work from worker_thread+0x1b0/0x474
  worker_thread from kthread+0x10c/0x12c
  kthread from ret_from_fork+0x14/0x24

Reported-by: petter@technux.se
Closes: https://lore.kernel.org/linux-wireless/9e98937d781c990615ef27ee0c858ff9@technux.se/T/#t
Cc: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
scpcom pushed a commit to scpcom/linux that referenced this pull request Nov 20, 2024
@mfleming @gregkh
perf hist: Update hist symbol when updating maps
8bcec93 
commit ac01c8c upstream.

AddressSanitizer found a use-after-free bug in the symbol code which
manifested as 'perf top' segfaulting.

  ==1238389==ERROR: AddressSanitizer: heap-use-after-free on address 0x60b00c48844b at pc 0x5650d8035961 bp 0x7f751aaecc90 sp 0x7f751aaecc80
  READ of size 1 at 0x60b00c48844b thread T193
      #0 0x5650d8035960 in _sort__sym_cmp util/sort.c:310
      #1 0x5650d8043744 in hist_entry__cmp util/hist.c:1286
      #2 0x5650d8043951 in hists__findnew_entry util/hist.c:614
      #3 0x5650d804568f in __hists__add_entry util/hist.c:754
      #4 0x5650d8045bf9 in hists__add_entry util/hist.c:772
      #5 0x5650d8045df1 in iter_add_single_normal_entry util/hist.c:997
      #6 0x5650d8043326 in hist_entry_iter__add util/hist.c:1242
      ayufan-rock64#7 0x5650d7ceeefe in perf_event__process_sample /home/matt/src/linux/tools/perf/builtin-top.c:845
      ayufan-rock64#8 0x5650d7ceeefe in deliver_event /home/matt/src/linux/tools/perf/builtin-top.c:1208
      ayufan-rock64#9 0x5650d7fdb51b in do_flush util/ordered-events.c:245
      ayufan-rock64#10 0x5650d7fdb51b in __ordered_events__flush util/ordered-events.c:324
      ayufan-rock64#11 0x5650d7ced743 in process_thread /home/matt/src/linux/tools/perf/builtin-top.c:1120
      ayufan-rock64#12 0x7f757ef1f133 in start_thread nptl/pthread_create.c:442
      ayufan-rock64#13 0x7f757ef9f7db in clone3 ../sysdeps/unix/sysv/linux/x86_64/clone3.S:81

When updating hist maps it's also necessary to update the hist symbol
reference because the old one gets freed in map__put().

While this bug was probably introduced with 5c24b67 ("perf
tools: Replace map->referenced & maps->removed_maps with map->refcnt"),
the symbol objects were leaked until c087e94 ("perf machine:
Fix refcount usage when processing PERF_RECORD_KSYMBOL") was merged so
the bug was masked.

Fixes: c087e94 ("perf machine: Fix refcount usage when processing PERF_RECORD_KSYMBOL")
Reported-by: Yunzhao Li <yunzhao@cloudflare.com>
Signed-off-by: Matt Fleming (Cloudflare) <matt@readmodwrite.com>
Cc: Ian Rogers <irogers@google.com>
Cc: kernel-team@cloudflare.com
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: stable@vger.kernel.org # v5.13+
Link: https://lore.kernel.org/r/20240815142212.3834625-1-matt@readmodwrite.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
scpcom pushed a commit to scpcom/linux that referenced this pull request Nov 20, 2024
@namhyung @gregkh
perf report: Fix segfault when 'sym' sort key is not used
acebeb3 
commit 9af2efe upstream.

The fields in the hist_entry are filled on-demand which means they only
have meaningful values when relevant sort keys are used.

So if neither of 'dso' nor 'sym' sort keys are used, the map/symbols in
the hist entry can be garbage.  So it shouldn't access it
unconditionally.

I got a segfault, when I wanted to see cgroup profiles.

  $ sudo perf record -a --all-cgroups --synth=cgroup true

  $ sudo perf report -s cgroup

  Program received signal SIGSEGV, Segmentation fault.
  0x00005555557a8d90 in map__dso (map=0x0) at util/map.h:48
  48		return RC_CHK_ACCESS(map)->dso;
  (gdb) bt
  #0  0x00005555557a8d90 in map__dso (map=0x0) at util/map.h:48
  #1  0x00005555557aa39b in map__load (map=0x0) at util/map.c:344
  #2  0x00005555557aa592 in map__find_symbol (map=0x0, addr=140736115941088) at util/map.c:385
  #3  0x00005555557ef000 in hists__findnew_entry (hists=0x555556039d60, entry=0x7fffffffa4c0, al=0x7fffffffa8c0, sample_self=true)
      at util/hist.c:644
  #4  0x00005555557ef61c in __hists__add_entry (hists=0x555556039d60, al=0x7fffffffa8c0, sym_parent=0x0, bi=0x0, mi=0x0, ki=0x0,
      block_info=0x0, sample=0x7fffffffaa90, sample_self=true, ops=0x0) at util/hist.c:761
  #5  0x00005555557ef71f in hists__add_entry (hists=0x555556039d60, al=0x7fffffffa8c0, sym_parent=0x0, bi=0x0, mi=0x0, ki=0x0,
      sample=0x7fffffffaa90, sample_self=true) at util/hist.c:779
  #6  0x00005555557f00fb in iter_add_single_normal_entry (iter=0x7fffffffa900, al=0x7fffffffa8c0) at util/hist.c:1015
  ayufan-rock64#7  0x00005555557f09a7 in hist_entry_iter__add (iter=0x7fffffffa900, al=0x7fffffffa8c0, max_stack_depth=127, arg=0x7fffffffbce0)
      at util/hist.c:1260
  ayufan-rock64#8  0x00005555555ba7ce in process_sample_event (tool=0x7fffffffbce0, event=0x7ffff7c14128, sample=0x7fffffffaa90, evsel=0x555556039ad0,
      machine=0x5555560388e8) at builtin-report.c:334
  ayufan-rock64#9  0x00005555557b30c8 in evlist__deliver_sample (evlist=0x555556039010, tool=0x7fffffffbce0, event=0x7ffff7c14128,
      sample=0x7fffffffaa90, evsel=0x555556039ad0, machine=0x5555560388e8) at util/session.c:1232
  ayufan-rock64#10 0x00005555557b32bc in machines__deliver_event (machines=0x5555560388e8, evlist=0x555556039010, event=0x7ffff7c14128,
      sample=0x7fffffffaa90, tool=0x7fffffffbce0, file_offset=110888, file_path=0x555556038ff0 "perf.data") at util/session.c:1271
  ayufan-rock64#11 0x00005555557b3848 in perf_session__deliver_event (session=0x5555560386d0, event=0x7ffff7c14128, tool=0x7fffffffbce0,
      file_offset=110888, file_path=0x555556038ff0 "perf.data") at util/session.c:1354
  ayufan-rock64#12 0x00005555557affaf in ordered_events__deliver_event (oe=0x555556038e60, event=0x555556135aa0) at util/session.c:132
  ayufan-rock64#13 0x00005555557bb605 in do_flush (oe=0x555556038e60, show_progress=false) at util/ordered-events.c:245
  ayufan-rock64#14 0x00005555557bb95c in __ordered_events__flush (oe=0x555556038e60, how=OE_FLUSH__ROUND, timestamp=0) at util/ordered-events.c:324
  ayufan-rock64#15 0x00005555557bba46 in ordered_events__flush (oe=0x555556038e60, how=OE_FLUSH__ROUND) at util/ordered-events.c:342
  ayufan-rock64#16 0x00005555557b1b3b in perf_event__process_finished_round (tool=0x7fffffffbce0, event=0x7ffff7c15bb8, oe=0x555556038e60)
      at util/session.c:780
  ayufan-rock64#17 0x00005555557b3b27 in perf_session__process_user_event (session=0x5555560386d0, event=0x7ffff7c15bb8, file_offset=117688,
      file_path=0x555556038ff0 "perf.data") at util/session.c:1406

As you can see the entry->ms.map was NULL even if he->ms.map has a
value.  This is because 'sym' sort key is not given, so it cannot assume
whether he->ms.sym and entry->ms.sym is the same.  I only checked the
'sym' sort key here as it implies 'dso' behavior (so maps are the same).

Fixes: ac01c8c ("perf hist: Update hist symbol when updating maps")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Matt Fleming <matt@readmodwrite.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240826221045.1202305-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
scpcom pushed a commit to scpcom/linux that referenced this pull request Nov 20, 2024
@gregkh
perf sched: Move start_work_mutex and work_done_wait_mutex initializa…
e6cdd72 
…tion to perf_sched__replay()

[ Upstream commit c690786 ]

The start_work_mutex and work_done_wait_mutex are used only for the
'perf sched replay'. Put their initialization in perf_sched__replay () to
reduce unnecessary actions in other commands.

Simple functional testing:

  # perf sched record perf bench sched messaging
  # Running 'sched/messaging' benchmark:
  # 20 sender and receiver processes per group
  # 10 groups == 400 processes run

       Total time: 0.197 [sec]
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 14.952 MB perf.data (134165 samples) ]

  # perf sched replay
  run measurement overhead: 108 nsecs
  sleep measurement overhead: 65658 nsecs
  the run test took 999991 nsecs
  the sleep test took 1079324 nsecs
  nr_run_events:        42378
  nr_sleep_events:      43102
  nr_wakeup_events:     31852
  target-less wakeups:  17
  multi-target wakeups: 712
  task      0 (             swapper:         0), nr_events: 10451
  task      1 (             swapper:         1), nr_events: 3
  task      2 (             swapper:         2), nr_events: 1
  <SNIP>
  task    717 (     sched-messaging:     74483), nr_events: 152
  task    718 (     sched-messaging:     74484), nr_events: 1944
  task    719 (     sched-messaging:     74485), nr_events: 73
  task    720 (     sched-messaging:     74486), nr_events: 163
  task    721 (     sched-messaging:     74487), nr_events: 942
  task    722 (     sched-messaging:     74488), nr_events: 78
  task    723 (     sched-messaging:     74489), nr_events: 1090
  ------------------------------------------------------------
  #1  : 1366.507, ravg: 1366.51, cpu: 7682.70 / 7682.70
  #2  : 1410.072, ravg: 1370.86, cpu: 7723.88 / 7686.82
  #3  : 1396.296, ravg: 1373.41, cpu: 7568.20 / 7674.96
  #4  : 1381.019, ravg: 1374.17, cpu: 7531.81 / 7660.64
  #5  : 1393.826, ravg: 1376.13, cpu: 7725.25 / 7667.11
  #6  : 1401.581, ravg: 1378.68, cpu: 7594.82 / 7659.88
  ayufan-rock64#7  : 1381.337, ravg: 1378.94, cpu: 7371.22 / 7631.01
  ayufan-rock64#8  : 1373.842, ravg: 1378.43, cpu: 7894.92 / 7657.40
  ayufan-rock64#9  : 1364.697, ravg: 1377.06, cpu: 7324.91 / 7624.15
  ayufan-rock64#10 : 1363.613, ravg: 1375.72, cpu: 7209.55 / 7582.69
  # echo $?
  0

Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240206083228.172607-2-yangjihong1@huawei.com
Stable-dep-of: 1a5efc9 ("libsubcmd: Don't free the usage string")
Signed-off-by: Sasha Levin <sashal@kernel.org>
scpcom pushed a commit to scpcom/linux that referenced this pull request Nov 20, 2024
@gregkh
perf sched: Move curr_pid and cpu_last_switched initialization to per…
bfe9535 
…f_sched__{lat|map|replay}()

[ Upstream commit bd2cdf2 ]

The curr_pid and cpu_last_switched are used only for the
'perf sched replay/latency/map'. Put their initialization in
perf_sched__{lat|map|replay () to reduce unnecessary actions in other
commands.

Simple functional testing:

  # perf sched record perf bench sched messaging
  # Running 'sched/messaging' benchmark:
  # 20 sender and receiver processes per group
  # 10 groups == 400 processes run

       Total time: 0.209 [sec]
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 16.456 MB perf.data (147907 samples) ]

  # perf sched lat

   -------------------------------------------------------------------------------------------------------------------------------------------
    Task                  |   Runtime ms  | Switches | Avg delay ms    | Max delay ms    | Max delay start           | Max delay end          |
   -------------------------------------------------------------------------------------------------------------------------------------------
    sched-messaging:(401) |   2990.699 ms |    38705 | avg:   0.661 ms | max:  67.046 ms | max start: 456532.624830 s | max end: 456532.691876 s
    qemu-system-x86:(7)   |    179.764 ms |     2191 | avg:   0.152 ms | max:  21.857 ms | max start: 456532.576434 s | max end: 456532.598291 s
    sshd:48125            |      0.522 ms |        2 | avg:   0.037 ms | max:   0.046 ms | max start: 456532.514610 s | max end: 456532.514656 s
  <SNIP>
    ksoftirqd/11:82       |      0.063 ms |        1 | avg:   0.005 ms | max:   0.005 ms | max start: 456532.769366 s | max end: 456532.769371 s
    kworker/9:0-mm_:34624 |      0.233 ms |       20 | avg:   0.004 ms | max:   0.007 ms | max start: 456532.690804 s | max end: 456532.690812 s
    migration/13:93       |      0.000 ms |        1 | avg:   0.004 ms | max:   0.004 ms | max start: 456532.512669 s | max end: 456532.512674 s
   -----------------------------------------------------------------------------------------------------------------
    TOTAL:                |   3180.750 ms |    41368 |
   ---------------------------------------------------

  # echo $?
  0

  # perf sched map
    *A0                                                               456532.510141 secs A0 => migration/0:15
    *.                                                                456532.510171 secs .  => swapper:0
     .  *B0                                                           456532.510261 secs B0 => migration/1:21
     .  *.                                                            456532.510279 secs
  <SNIP>
     L7  L7  L7  L7  L7  L7  L7  L7  L7  L7  L7 *L7  .   .   .   .    456532.785979 secs
     L7  L7  L7  L7  L7  L7  L7  L7  L7  L7  L7  L7 *L7  .   .   .    456532.786054 secs
     L7  L7  L7  L7  L7  L7  L7  L7  L7  L7  L7  L7  L7 *L7  .   .    456532.786127 secs
     L7  L7  L7  L7  L7  L7  L7  L7  L7  L7  L7  L7  L7  L7 *L7  .    456532.786197 secs
     L7  L7  L7  L7  L7  L7  L7  L7  L7  L7  L7  L7  L7  L7  L7 *L7   456532.786270 secs
  # echo $?
  0

  # perf sched replay
  run measurement overhead: 108 nsecs
  sleep measurement overhead: 66473 nsecs
  the run test took 1000002 nsecs
  the sleep test took 1082686 nsecs
  nr_run_events:        49334
  nr_sleep_events:      50054
  nr_wakeup_events:     34701
  target-less wakeups:  165
  multi-target wakeups: 766
  task      0 (             swapper:         0), nr_events: 15419
  task      1 (             swapper:         1), nr_events: 1
  task      2 (             swapper:         2), nr_events: 1
  <SNIP>
  task    715 (     sched-messaging:    110248), nr_events: 1438
  task    716 (     sched-messaging:    110249), nr_events: 512
  task    717 (     sched-messaging:    110250), nr_events: 500
  task    718 (     sched-messaging:    110251), nr_events: 537
  task    719 (     sched-messaging:    110252), nr_events: 823
  ------------------------------------------------------------
  #1  : 1325.288, ravg: 1325.29, cpu: 7823.35 / 7823.35
  #2  : 1363.606, ravg: 1329.12, cpu: 7655.53 / 7806.56
  #3  : 1349.494, ravg: 1331.16, cpu: 7544.80 / 7780.39
  #4  : 1311.488, ravg: 1329.19, cpu: 7495.13 / 7751.86
  #5  : 1309.902, ravg: 1327.26, cpu: 7266.65 / 7703.34
  #6  : 1309.535, ravg: 1325.49, cpu: 7843.86 / 7717.39
  ayufan-rock64#7  : 1316.482, ravg: 1324.59, cpu: 7854.41 / 7731.09
  ayufan-rock64#8  : 1366.604, ravg: 1328.79, cpu: 7955.81 / 7753.57
  ayufan-rock64#9  : 1326.286, ravg: 1328.54, cpu: 7466.86 / 7724.90
  ayufan-rock64#10 : 1356.653, ravg: 1331.35, cpu: 7566.60 / 7709.07
  # echo $?
  0

Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240206083228.172607-5-yangjihong1@huawei.com
Stable-dep-of: 1a5efc9 ("libsubcmd: Don't free the usage string")
Signed-off-by: Sasha Levin <sashal@kernel.org>
scpcom pushed a commit to scpcom/linux that referenced this pull request Nov 20, 2024
@gregkh
NFSv4: Prevent NULL-pointer dereference in nfs42_complete_copies()
632344b 
[ Upstream commit a848c29 ]

On the node of an NFS client, some files saved in the mountpoint of the
NFS server were copied to another location of the same NFS server.
Accidentally, the nfs42_complete_copies() got a NULL-pointer dereference
crash with the following syslog:

[232064.838881] NFSv4: state recovery failed for open file nfs/pvc-12b5200d-cd0f-46a3-b9f0-af8f4fe0ef64.qcow2, error = -116
[232064.839360] NFSv4: state recovery failed for open file nfs/pvc-12b5200d-cd0f-46a3-b9f0-af8f4fe0ef64.qcow2, error = -116
[232066.588183] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000058
[232066.588586] Mem abort info:
[232066.588701]   ESR = 0x0000000096000007
[232066.588862]   EC = 0x25: DABT (current EL), IL = 32 bits
[232066.589084]   SET = 0, FnV = 0
[232066.589216]   EA = 0, S1PTW = 0
[232066.589340]   FSC = 0x07: level 3 translation fault
[232066.589559] Data abort info:
[232066.589683]   ISV = 0, ISS = 0x00000007
[232066.589842]   CM = 0, WnR = 0
[232066.589967] user pgtable: 64k pages, 48-bit VAs, pgdp=00002000956ff400
[232066.590231] [0000000000000058] pgd=08001100ae100003, p4d=08001100ae100003, pud=08001100ae100003, pmd=08001100b3c00003, pte=0000000000000000
[232066.590757] Internal error: Oops: 96000007 [#1] SMP
[232066.590958] Modules linked in: rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm vhost_net vhost vhost_iotlb tap tun ipt_rpfilter xt_multiport ip_set_hash_ip ip_set_hash_net xfrm_interface xfrm6_tunnel tunnel4 tunnel6 esp4 ah4 wireguard libcurve25519_generic veth xt_addrtype xt_set nf_conntrack_netlink ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_bitmap_port ip_set_hash_ipport dummy ip_set ip_vs_sh ip_vs_wrr ip_vs_rr ip_vs iptable_filter sch_ingress nfnetlink_cttimeout vport_gre ip_gre ip_tunnel gre vport_geneve geneve vport_vxlan vxlan ip6_udp_tunnel udp_tunnel openvswitch nf_conncount dm_round_robin dm_service_time dm_multipath xt_nat xt_MASQUERADE nft_chain_nat nf_nat xt_mark xt_conntrack xt_comment nft_compat nft_counter nf_tables nfnetlink ocfs2 ocfs2_nodemanager ocfs2_stackglue iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ipmi_ssif nbd overlay 8021q garp mrp bonding tls rfkill sunrpc ext4 mbcache jbd2
[232066.591052]  vfat fat cas_cache cas_disk ses enclosure scsi_transport_sas sg acpi_ipmi ipmi_si ipmi_devintf ipmi_msghandler ip_tables vfio_pci vfio_pci_core vfio_virqfd vfio_iommu_type1 vfio dm_mirror dm_region_hash dm_log dm_mod nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 br_netfilter bridge stp llc fuse xfs libcrc32c ast drm_vram_helper qla2xxx drm_kms_helper syscopyarea crct10dif_ce sysfillrect ghash_ce sysimgblt sha2_ce fb_sys_fops cec sha256_arm64 sha1_ce drm_ttm_helper ttm nvme_fc igb sbsa_gwdt nvme_fabrics drm nvme_core i2c_algo_bit i40e scsi_transport_fc megaraid_sas aes_neon_bs
[232066.596953] CPU: 6 PID: 4124696 Comm: 10.253.166.125- Kdump: loaded Not tainted 5.15.131-9.cl9_ocfs2.aarch64 #1
[232066.597356] Hardware name: Great Wall .\x93\x8e...RF6260 V5/GWMSSE2GL1T, BIOS T656FBE_V3.0.18 2024-01-06
[232066.597721] pstate: 20400009 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[232066.598034] pc : nfs4_reclaim_open_state+0x220/0x800 [nfsv4]
[232066.598327] lr : nfs4_reclaim_open_state+0x12c/0x800 [nfsv4]
[232066.598595] sp : ffff8000f568fc70
[232066.598731] x29: ffff8000f568fc70 x28: 0000000000001000 x27: ffff21003db33000
[232066.599030] x26: ffff800005521ae0 x25: ffff0100f98fa3f0 x24: 0000000000000001
[232066.599319] x23: ffff800009920008 x22: ffff21003db33040 x21: ffff21003db33050
[232066.599628] x20: ffff410172fe9e40 x19: ffff410172fe9e00 x18: 0000000000000000
[232066.599914] x17: 0000000000000000 x16: 0000000000000004 x15: 0000000000000000
[232066.600195] x14: 0000000000000000 x13: ffff800008e685a8 x12: 00000000eac0c6e6
[232066.600498] x11: 0000000000000000 x10: 0000000000000008 x9 : ffff8000054e5828
[232066.600784] x8 : 00000000ffffffbf x7 : 0000000000000001 x6 : 000000000a9eb14a
[232066.601062] x5 : 0000000000000000 x4 : ffff70ff8a14a800 x3 : 0000000000000058
[232066.601348] x2 : 0000000000000001 x1 : 54dce46366daa6c6 x0 : 0000000000000000
[232066.601636] Call trace:
[232066.601749]  nfs4_reclaim_open_state+0x220/0x800 [nfsv4]
[232066.601998]  nfs4_do_reclaim+0x1b8/0x28c [nfsv4]
[232066.602218]  nfs4_state_manager+0x928/0x10f0 [nfsv4]
[232066.602455]  nfs4_run_state_manager+0x78/0x1b0 [nfsv4]
[232066.602690]  kthread+0x110/0x114
[232066.602830]  ret_from_fork+0x10/0x20
[232066.602985] Code: 1400000d f9403f20 f9402e61 91016003 (f9402c00)
[232066.603284] SMP: stopping secondary CPUs
[232066.606936] Starting crashdump kernel...
[232066.607146] Bye!

Analysing the vmcore, we know that nfs4_copy_state listed by destination
nfs_server->ss_copies was added by the field copies in handle_async_copy(),
and we found a waiting copy process with the stack as:
PID: 3511963  TASK: ffff710028b47e00  CPU: 0   COMMAND: "cp"
 #0 [ffff8001116ef740] __switch_to at ffff8000081b92f4
 #1 [ffff8001116ef760] __schedule at ffff800008dd0650
 #2 [ffff8001116ef7c0] schedule at ffff800008dd0a00
 #3 [ffff8001116ef7e0] schedule_timeout at ffff800008dd6aa0
 #4 [ffff8001116ef860] __wait_for_common at ffff800008dd166c
 #5 [ffff8001116ef8e0] wait_for_completion_interruptible at ffff800008dd1898
 #6 [ffff8001116ef8f0] handle_async_copy at ffff8000055142f4 [nfsv4]
 ayufan-rock64#7 [ffff8001116ef970] _nfs42_proc_copy at ffff8000055147c8 [nfsv4]
 ayufan-rock64#8 [ffff8001116efa80] nfs42_proc_copy at ffff800005514cf0 [nfsv4]
 ayufan-rock64#9 [ffff8001116efc50] __nfs4_copy_file_range.constprop.0 at ffff8000054ed694 [nfsv4]

The NULL-pointer dereference was due to nfs42_complete_copies() listed
the nfs_server->ss_copies by the field ss_copies of nfs4_copy_state.
So the nfs4_copy_state address ffff0100f98fa3f0 was offset by 0x10 and
the data accessed through this pointer was also incorrect. Generally,
the ordered list nfs4_state_owner->so_states indicate open(O_RDWR) or
open(O_WRITE) states are reclaimed firstly by nfs4_reclaim_open_state().
When destination state reclaim is failed with NFS_STATE_RECOVERY_FAILED
and copies are not deleted in nfs_server->ss_copies, the source state
may be passed to the nfs42_complete_copies() process earlier, resulting
in this crash scene finally. To solve this issue, we add a list_head
nfs_server->ss_src_copies for a server-to-server copy specially.

Fixes: 0e65a32 ("NFS: handle source server reboot")
Signed-off-by: Yanjun Zhang <zhangyanjun@cestc.cn>
Reviewed-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
scpcom pushed a commit to scpcom/linux that referenced this pull request Nov 20, 2024
@acmel @gregkh
perf lock: Don't pass an ERR_PTR() directly to perf_session__delete()
7c21e98 
commit abaf1e0 upstream.

While debugging a segfault on 'perf lock contention' without an
available perf.data file I noticed that it was basically calling:

	perf_session__delete(ERR_PTR(-1))

Resulting in:

  (gdb) run lock contention
  Starting program: /root/bin/perf lock contention
  [Thread debugging using libthread_db enabled]
  Using host libthread_db library "/lib64/libthread_db.so.1".
  failed to open perf.data: No such file or directory  (try 'perf record' first)
  Initializing perf session failed

  Program received signal SIGSEGV, Segmentation fault.
  0x00000000005e7515 in auxtrace__free (session=0xffffffffffffffff) at util/auxtrace.c:2858
  2858		if (!session->auxtrace)
  (gdb) p session
  $1 = (struct perf_session *) 0xffffffffffffffff
  (gdb) bt
  #0  0x00000000005e7515 in auxtrace__free (session=0xffffffffffffffff) at util/auxtrace.c:2858
  #1  0x000000000057bb4d in perf_session__delete (session=0xffffffffffffffff) at util/session.c:300
  #2  0x000000000047c421 in __cmd_contention (argc=0, argv=0x7fffffffe200) at builtin-lock.c:2161
  #3  0x000000000047dc95 in cmd_lock (argc=0, argv=0x7fffffffe200) at builtin-lock.c:2604
  #4  0x0000000000501466 in run_builtin (p=0xe597a8 <commands+552>, argc=2, argv=0x7fffffffe200) at perf.c:322
  #5  0x00000000005016d5 in handle_internal_command (argc=2, argv=0x7fffffffe200) at perf.c:375
  #6  0x0000000000501824 in run_argv (argcp=0x7fffffffe02c, argv=0x7fffffffe020) at perf.c:419
  ayufan-rock64#7  0x0000000000501b11 in main (argc=2, argv=0x7fffffffe200) at perf.c:535
  (gdb)

So just set it to NULL after using PTR_ERR(session) to decode the error
as perf_session__delete(NULL) is supported.

Fixes: eef4fee ("perf lock: Dynamically allocate lockhash_table")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mamatha Inamdar <mamatha4@linux.vnet.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Ross Zwisler <zwisler@chromium.org>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Yang Jihong <yangjihong1@huawei.com>
Link: https://lore.kernel.org/lkml/ZN4R1AYfsD2J8lRs@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
scpcom pushed a commit to scpcom/linux that referenced this pull request Nov 20, 2024
@mfleming @gregkh
perf hist: Update hist symbol when updating maps
be8d32e 
commit ac01c8c upstream.

AddressSanitizer found a use-after-free bug in the symbol code which
manifested as 'perf top' segfaulting.

  ==1238389==ERROR: AddressSanitizer: heap-use-after-free on address 0x60b00c48844b at pc 0x5650d8035961 bp 0x7f751aaecc90 sp 0x7f751aaecc80
  READ of size 1 at 0x60b00c48844b thread T193
      #0 0x5650d8035960 in _sort__sym_cmp util/sort.c:310
      #1 0x5650d8043744 in hist_entry__cmp util/hist.c:1286
      #2 0x5650d8043951 in hists__findnew_entry util/hist.c:614
      #3 0x5650d804568f in __hists__add_entry util/hist.c:754
      #4 0x5650d8045bf9 in hists__add_entry util/hist.c:772
      #5 0x5650d8045df1 in iter_add_single_normal_entry util/hist.c:997
      #6 0x5650d8043326 in hist_entry_iter__add util/hist.c:1242
      ayufan-rock64#7 0x5650d7ceeefe in perf_event__process_sample /home/matt/src/linux/tools/perf/builtin-top.c:845
      ayufan-rock64#8 0x5650d7ceeefe in deliver_event /home/matt/src/linux/tools/perf/builtin-top.c:1208
      ayufan-rock64#9 0x5650d7fdb51b in do_flush util/ordered-events.c:245
      ayufan-rock64#10 0x5650d7fdb51b in __ordered_events__flush util/ordered-events.c:324
      ayufan-rock64#11 0x5650d7ced743 in process_thread /home/matt/src/linux/tools/perf/builtin-top.c:1120
      ayufan-rock64#12 0x7f757ef1f133 in start_thread nptl/pthread_create.c:442
      ayufan-rock64#13 0x7f757ef9f7db in clone3 ../sysdeps/unix/sysv/linux/x86_64/clone3.S:81

When updating hist maps it's also necessary to update the hist symbol
reference because the old one gets freed in map__put().

While this bug was probably introduced with 5c24b67 ("perf
tools: Replace map->referenced & maps->removed_maps with map->refcnt"),
the symbol objects were leaked until c087e94 ("perf machine:
Fix refcount usage when processing PERF_RECORD_KSYMBOL") was merged so
the bug was masked.

Fixes: c087e94 ("perf machine: Fix refcount usage when processing PERF_RECORD_KSYMBOL")
Reported-by: Yunzhao Li <yunzhao@cloudflare.com>
Signed-off-by: Matt Fleming (Cloudflare) <matt@readmodwrite.com>
Cc: Ian Rogers <irogers@google.com>
Cc: kernel-team@cloudflare.com
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: stable@vger.kernel.org # v5.13+
Link: https://lore.kernel.org/r/20240815142212.3834625-1-matt@readmodwrite.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
scpcom pushed a commit to scpcom/linux that referenced this pull request Nov 20, 2024
@namhyung @gregkh
perf report: Fix segfault when 'sym' sort key is not used
776ebde 
commit 9af2efe upstream.

The fields in the hist_entry are filled on-demand which means they only
have meaningful values when relevant sort keys are used.

So if neither of 'dso' nor 'sym' sort keys are used, the map/symbols in
the hist entry can be garbage.  So it shouldn't access it
unconditionally.

I got a segfault, when I wanted to see cgroup profiles.

  $ sudo perf record -a --all-cgroups --synth=cgroup true

  $ sudo perf report -s cgroup

  Program received signal SIGSEGV, Segmentation fault.
  0x00005555557a8d90 in map__dso (map=0x0) at util/map.h:48
  48		return RC_CHK_ACCESS(map)->dso;
  (gdb) bt
  #0  0x00005555557a8d90 in map__dso (map=0x0) at util/map.h:48
  #1  0x00005555557aa39b in map__load (map=0x0) at util/map.c:344
  #2  0x00005555557aa592 in map__find_symbol (map=0x0, addr=140736115941088) at util/map.c:385
  #3  0x00005555557ef000 in hists__findnew_entry (hists=0x555556039d60, entry=0x7fffffffa4c0, al=0x7fffffffa8c0, sample_self=true)
      at util/hist.c:644
  #4  0x00005555557ef61c in __hists__add_entry (hists=0x555556039d60, al=0x7fffffffa8c0, sym_parent=0x0, bi=0x0, mi=0x0, ki=0x0,
      block_info=0x0, sample=0x7fffffffaa90, sample_self=true, ops=0x0) at util/hist.c:761
  #5  0x00005555557ef71f in hists__add_entry (hists=0x555556039d60, al=0x7fffffffa8c0, sym_parent=0x0, bi=0x0, mi=0x0, ki=0x0,
      sample=0x7fffffffaa90, sample_self=true) at util/hist.c:779
  #6  0x00005555557f00fb in iter_add_single_normal_entry (iter=0x7fffffffa900, al=0x7fffffffa8c0) at util/hist.c:1015
  ayufan-rock64#7  0x00005555557f09a7 in hist_entry_iter__add (iter=0x7fffffffa900, al=0x7fffffffa8c0, max_stack_depth=127, arg=0x7fffffffbce0)
      at util/hist.c:1260
  ayufan-rock64#8  0x00005555555ba7ce in process_sample_event (tool=0x7fffffffbce0, event=0x7ffff7c14128, sample=0x7fffffffaa90, evsel=0x555556039ad0,
      machine=0x5555560388e8) at builtin-report.c:334
  ayufan-rock64#9  0x00005555557b30c8 in evlist__deliver_sample (evlist=0x555556039010, tool=0x7fffffffbce0, event=0x7ffff7c14128,
      sample=0x7fffffffaa90, evsel=0x555556039ad0, machine=0x5555560388e8) at util/session.c:1232
  ayufan-rock64#10 0x00005555557b32bc in machines__deliver_event (machines=0x5555560388e8, evlist=0x555556039010, event=0x7ffff7c14128,
      sample=0x7fffffffaa90, tool=0x7fffffffbce0, file_offset=110888, file_path=0x555556038ff0 "perf.data") at util/session.c:1271
  ayufan-rock64#11 0x00005555557b3848 in perf_session__deliver_event (session=0x5555560386d0, event=0x7ffff7c14128, tool=0x7fffffffbce0,
      file_offset=110888, file_path=0x555556038ff0 "perf.data") at util/session.c:1354
  ayufan-rock64#12 0x00005555557affaf in ordered_events__deliver_event (oe=0x555556038e60, event=0x555556135aa0) at util/session.c:132
  ayufan-rock64#13 0x00005555557bb605 in do_flush (oe=0x555556038e60, show_progress=false) at util/ordered-events.c:245
  ayufan-rock64#14 0x00005555557bb95c in __ordered_events__flush (oe=0x555556038e60, how=OE_FLUSH__ROUND, timestamp=0) at util/ordered-events.c:324
  ayufan-rock64#15 0x00005555557bba46 in ordered_events__flush (oe=0x555556038e60, how=OE_FLUSH__ROUND) at util/ordered-events.c:342
  ayufan-rock64#16 0x00005555557b1b3b in perf_event__process_finished_round (tool=0x7fffffffbce0, event=0x7ffff7c15bb8, oe=0x555556038e60)
      at util/session.c:780
  ayufan-rock64#17 0x00005555557b3b27 in perf_session__process_user_event (session=0x5555560386d0, event=0x7ffff7c15bb8, file_offset=117688,
      file_path=0x555556038ff0 "perf.data") at util/session.c:1406

As you can see the entry->ms.map was NULL even if he->ms.map has a
value.  This is because 'sym' sort key is not given, so it cannot assume
whether he->ms.sym and entry->ms.sym is the same.  I only checked the
'sym' sort key here as it implies 'dso' behavior (so maps are the same).

Fixes: ac01c8c ("perf hist: Update hist symbol when updating maps")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Matt Fleming <matt@readmodwrite.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240826221045.1202305-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
scpcom pushed a commit to scpcom/linux that referenced this pull request Nov 20, 2024
@gregkh
perf sched: Move start_work_mutex and work_done_wait_mutex initializa…
85ca3d4 
…tion to perf_sched__replay()

[ Upstream commit c690786 ]

The start_work_mutex and work_done_wait_mutex are used only for the
'perf sched replay'. Put their initialization in perf_sched__replay () to
reduce unnecessary actions in other commands.

Simple functional testing:

  # perf sched record perf bench sched messaging
  # Running 'sched/messaging' benchmark:
  # 20 sender and receiver processes per group
  # 10 groups == 400 processes run

       Total time: 0.197 [sec]
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 14.952 MB perf.data (134165 samples) ]

  # perf sched replay
  run measurement overhead: 108 nsecs
  sleep measurement overhead: 65658 nsecs
  the run test took 999991 nsecs
  the sleep test took 1079324 nsecs
  nr_run_events:        42378
  nr_sleep_events:      43102
  nr_wakeup_events:     31852
  target-less wakeups:  17
  multi-target wakeups: 712
  task      0 (             swapper:         0), nr_events: 10451
  task      1 (             swapper:         1), nr_events: 3
  task      2 (             swapper:         2), nr_events: 1
  <SNIP>
  task    717 (     sched-messaging:     74483), nr_events: 152
  task    718 (     sched-messaging:     74484), nr_events: 1944
  task    719 (     sched-messaging:     74485), nr_events: 73
  task    720 (     sched-messaging:     74486), nr_events: 163
  task    721 (     sched-messaging:     74487), nr_events: 942
  task    722 (     sched-messaging:     74488), nr_events: 78
  task    723 (     sched-messaging:     74489), nr_events: 1090
  ------------------------------------------------------------
  #1  : 1366.507, ravg: 1366.51, cpu: 7682.70 / 7682.70
  #2  : 1410.072, ravg: 1370.86, cpu: 7723.88 / 7686.82
  #3  : 1396.296, ravg: 1373.41, cpu: 7568.20 / 7674.96
  #4  : 1381.019, ravg: 1374.17, cpu: 7531.81 / 7660.64
  #5  : 1393.826, ravg: 1376.13, cpu: 7725.25 / 7667.11
  #6  : 1401.581, ravg: 1378.68, cpu: 7594.82 / 7659.88
  ayufan-rock64#7  : 1381.337, ravg: 1378.94, cpu: 7371.22 / 7631.01
  ayufan-rock64#8  : 1373.842, ravg: 1378.43, cpu: 7894.92 / 7657.40
  ayufan-rock64#9  : 1364.697, ravg: 1377.06, cpu: 7324.91 / 7624.15
  ayufan-rock64#10 : 1363.613, ravg: 1375.72, cpu: 7209.55 / 7582.69
  # echo $?
  0

Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240206083228.172607-2-yangjihong1@huawei.com
Stable-dep-of: 1a5efc9 ("libsubcmd: Don't free the usage string")
Signed-off-by: Sasha Levin <sashal@kernel.org>
scpcom pushed a commit to scpcom/linux that referenced this pull request Nov 20, 2024
@gregkh
perf sched: Move curr_pid and cpu_last_switched initialization to per…
03cec19 
…f_sched__{lat|map|replay}()

[ Upstream commit bd2cdf2 ]

The curr_pid and cpu_last_switched are used only for the
'perf sched replay/latency/map'. Put their initialization in
perf_sched__{lat|map|replay () to reduce unnecessary actions in other
commands.

Simple functional testing:

  # perf sched record perf bench sched messaging
  # Running 'sched/messaging' benchmark:
  # 20 sender and receiver processes per group
  # 10 groups == 400 processes run

       Total time: 0.209 [sec]
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 16.456 MB perf.data (147907 samples) ]

  # perf sched lat

   -------------------------------------------------------------------------------------------------------------------------------------------
    Task                  |   Runtime ms  | Switches | Avg delay ms    | Max delay ms    | Max delay start           | Max delay end          |
   -------------------------------------------------------------------------------------------------------------------------------------------
    sched-messaging:(401) |   2990.699 ms |    38705 | avg:   0.661 ms | max:  67.046 ms | max start: 456532.624830 s | max end: 456532.691876 s
    qemu-system-x86:(7)   |    179.764 ms |     2191 | avg:   0.152 ms | max:  21.857 ms | max start: 456532.576434 s | max end: 456532.598291 s
    sshd:48125            |      0.522 ms |        2 | avg:   0.037 ms | max:   0.046 ms | max start: 456532.514610 s | max end: 456532.514656 s
  <SNIP>
    ksoftirqd/11:82       |      0.063 ms |        1 | avg:   0.005 ms | max:   0.005 ms | max start: 456532.769366 s | max end: 456532.769371 s
    kworker/9:0-mm_:34624 |      0.233 ms |       20 | avg:   0.004 ms | max:   0.007 ms | max start: 456532.690804 s | max end: 456532.690812 s
    migration/13:93       |      0.000 ms |        1 | avg:   0.004 ms | max:   0.004 ms | max start: 456532.512669 s | max end: 456532.512674 s
   -----------------------------------------------------------------------------------------------------------------
    TOTAL:                |   3180.750 ms |    41368 |
   ---------------------------------------------------

  # echo $?
  0

  # perf sched map
    *A0                                                               456532.510141 secs A0 => migration/0:15
    *.                                                                456532.510171 secs .  => swapper:0
     .  *B0                                                           456532.510261 secs B0 => migration/1:21
     .  *.                                                            456532.510279 secs
  <SNIP>
     L7  L7  L7  L7  L7  L7  L7  L7  L7  L7  L7 *L7  .   .   .   .    456532.785979 secs
     L7  L7  L7  L7  L7  L7  L7  L7  L7  L7  L7  L7 *L7  .   .   .    456532.786054 secs
     L7  L7  L7  L7  L7  L7  L7  L7  L7  L7  L7  L7  L7 *L7  .   .    456532.786127 secs
     L7  L7  L7  L7  L7  L7  L7  L7  L7  L7  L7  L7  L7  L7 *L7  .    456532.786197 secs
     L7  L7  L7  L7  L7  L7  L7  L7  L7  L7  L7  L7  L7  L7  L7 *L7   456532.786270 secs
  # echo $?
  0

  # perf sched replay
  run measurement overhead: 108 nsecs
  sleep measurement overhead: 66473 nsecs
  the run test took 1000002 nsecs
  the sleep test took 1082686 nsecs
  nr_run_events:        49334
  nr_sleep_events:      50054
  nr_wakeup_events:     34701
  target-less wakeups:  165
  multi-target wakeups: 766
  task      0 (             swapper:         0), nr_events: 15419
  task      1 (             swapper:         1), nr_events: 1
  task      2 (             swapper:         2), nr_events: 1
  <SNIP>
  task    715 (     sched-messaging:    110248), nr_events: 1438
  task    716 (     sched-messaging:    110249), nr_events: 512
  task    717 (     sched-messaging:    110250), nr_events: 500
  task    718 (     sched-messaging:    110251), nr_events: 537
  task    719 (     sched-messaging:    110252), nr_events: 823
  ------------------------------------------------------------
  #1  : 1325.288, ravg: 1325.29, cpu: 7823.35 / 7823.35
  #2  : 1363.606, ravg: 1329.12, cpu: 7655.53 / 7806.56
  #3  : 1349.494, ravg: 1331.16, cpu: 7544.80 / 7780.39
  #4  : 1311.488, ravg: 1329.19, cpu: 7495.13 / 7751.86
  #5  : 1309.902, ravg: 1327.26, cpu: 7266.65 / 7703.34
  #6  : 1309.535, ravg: 1325.49, cpu: 7843.86 / 7717.39
  ayufan-rock64#7  : 1316.482, ravg: 1324.59, cpu: 7854.41 / 7731.09
  ayufan-rock64#8  : 1366.604, ravg: 1328.79, cpu: 7955.81 / 7753.57
  ayufan-rock64#9  : 1326.286, ravg: 1328.54, cpu: 7466.86 / 7724.90
  ayufan-rock64#10 : 1356.653, ravg: 1331.35, cpu: 7566.60 / 7709.07
  # echo $?
  0

Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240206083228.172607-5-yangjihong1@huawei.com
Stable-dep-of: 1a5efc9 ("libsubcmd: Don't free the usage string")
Signed-off-by: Sasha Levin <sashal@kernel.org>
scpcom pushed a commit to scpcom/linux that referenced this pull request Nov 20, 2024
@gregkh
NFSv4: Prevent NULL-pointer dereference in nfs42_complete_copies()
fca41e5 
[ Upstream commit a848c29 ]

On the node of an NFS client, some files saved in the mountpoint of the
NFS server were copied to another location of the same NFS server.
Accidentally, the nfs42_complete_copies() got a NULL-pointer dereference
crash with the following syslog:

[232064.838881] NFSv4: state recovery failed for open file nfs/pvc-12b5200d-cd0f-46a3-b9f0-af8f4fe0ef64.qcow2, error = -116
[232064.839360] NFSv4: state recovery failed for open file nfs/pvc-12b5200d-cd0f-46a3-b9f0-af8f4fe0ef64.qcow2, error = -116
[232066.588183] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000058
[232066.588586] Mem abort info:
[232066.588701]   ESR = 0x0000000096000007
[232066.588862]   EC = 0x25: DABT (current EL), IL = 32 bits
[232066.589084]   SET = 0, FnV = 0
[232066.589216]   EA = 0, S1PTW = 0
[232066.589340]   FSC = 0x07: level 3 translation fault
[232066.589559] Data abort info:
[232066.589683]   ISV = 0, ISS = 0x00000007
[232066.589842]   CM = 0, WnR = 0
[232066.589967] user pgtable: 64k pages, 48-bit VAs, pgdp=00002000956ff400
[232066.590231] [0000000000000058] pgd=08001100ae100003, p4d=08001100ae100003, pud=08001100ae100003, pmd=08001100b3c00003, pte=0000000000000000
[232066.590757] Internal error: Oops: 96000007 [#1] SMP
[232066.590958] Modules linked in: rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm vhost_net vhost vhost_iotlb tap tun ipt_rpfilter xt_multiport ip_set_hash_ip ip_set_hash_net xfrm_interface xfrm6_tunnel tunnel4 tunnel6 esp4 ah4 wireguard libcurve25519_generic veth xt_addrtype xt_set nf_conntrack_netlink ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_bitmap_port ip_set_hash_ipport dummy ip_set ip_vs_sh ip_vs_wrr ip_vs_rr ip_vs iptable_filter sch_ingress nfnetlink_cttimeout vport_gre ip_gre ip_tunnel gre vport_geneve geneve vport_vxlan vxlan ip6_udp_tunnel udp_tunnel openvswitch nf_conncount dm_round_robin dm_service_time dm_multipath xt_nat xt_MASQUERADE nft_chain_nat nf_nat xt_mark xt_conntrack xt_comment nft_compat nft_counter nf_tables nfnetlink ocfs2 ocfs2_nodemanager ocfs2_stackglue iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ipmi_ssif nbd overlay 8021q garp mrp bonding tls rfkill sunrpc ext4 mbcache jbd2
[232066.591052]  vfat fat cas_cache cas_disk ses enclosure scsi_transport_sas sg acpi_ipmi ipmi_si ipmi_devintf ipmi_msghandler ip_tables vfio_pci vfio_pci_core vfio_virqfd vfio_iommu_type1 vfio dm_mirror dm_region_hash dm_log dm_mod nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 br_netfilter bridge stp llc fuse xfs libcrc32c ast drm_vram_helper qla2xxx drm_kms_helper syscopyarea crct10dif_ce sysfillrect ghash_ce sysimgblt sha2_ce fb_sys_fops cec sha256_arm64 sha1_ce drm_ttm_helper ttm nvme_fc igb sbsa_gwdt nvme_fabrics drm nvme_core i2c_algo_bit i40e scsi_transport_fc megaraid_sas aes_neon_bs
[232066.596953] CPU: 6 PID: 4124696 Comm: 10.253.166.125- Kdump: loaded Not tainted 5.15.131-9.cl9_ocfs2.aarch64 #1
[232066.597356] Hardware name: Great Wall .\x93\x8e...RF6260 V5/GWMSSE2GL1T, BIOS T656FBE_V3.0.18 2024-01-06
[232066.597721] pstate: 20400009 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[232066.598034] pc : nfs4_reclaim_open_state+0x220/0x800 [nfsv4]
[232066.598327] lr : nfs4_reclaim_open_state+0x12c/0x800 [nfsv4]
[232066.598595] sp : ffff8000f568fc70
[232066.598731] x29: ffff8000f568fc70 x28: 0000000000001000 x27: ffff21003db33000
[232066.599030] x26: ffff800005521ae0 x25: ffff0100f98fa3f0 x24: 0000000000000001
[232066.599319] x23: ffff800009920008 x22: ffff21003db33040 x21: ffff21003db33050
[232066.599628] x20: ffff410172fe9e40 x19: ffff410172fe9e00 x18: 0000000000000000
[232066.599914] x17: 0000000000000000 x16: 0000000000000004 x15: 0000000000000000
[232066.600195] x14: 0000000000000000 x13: ffff800008e685a8 x12: 00000000eac0c6e6
[232066.600498] x11: 0000000000000000 x10: 0000000000000008 x9 : ffff8000054e5828
[232066.600784] x8 : 00000000ffffffbf x7 : 0000000000000001 x6 : 000000000a9eb14a
[232066.601062] x5 : 0000000000000000 x4 : ffff70ff8a14a800 x3 : 0000000000000058
[232066.601348] x2 : 0000000000000001 x1 : 54dce46366daa6c6 x0 : 0000000000000000
[232066.601636] Call trace:
[232066.601749]  nfs4_reclaim_open_state+0x220/0x800 [nfsv4]
[232066.601998]  nfs4_do_reclaim+0x1b8/0x28c [nfsv4]
[232066.602218]  nfs4_state_manager+0x928/0x10f0 [nfsv4]
[232066.602455]  nfs4_run_state_manager+0x78/0x1b0 [nfsv4]
[232066.602690]  kthread+0x110/0x114
[232066.602830]  ret_from_fork+0x10/0x20
[232066.602985] Code: 1400000d f9403f20 f9402e61 91016003 (f9402c00)
[232066.603284] SMP: stopping secondary CPUs
[232066.606936] Starting crashdump kernel...
[232066.607146] Bye!

Analysing the vmcore, we know that nfs4_copy_state listed by destination
nfs_server->ss_copies was added by the field copies in handle_async_copy(),
and we found a waiting copy process with the stack as:
PID: 3511963  TASK: ffff710028b47e00  CPU: 0   COMMAND: "cp"
 #0 [ffff8001116ef740] __switch_to at ffff8000081b92f4
 #1 [ffff8001116ef760] __schedule at ffff800008dd0650
 #2 [ffff8001116ef7c0] schedule at ffff800008dd0a00
 #3 [ffff8001116ef7e0] schedule_timeout at ffff800008dd6aa0
 #4 [ffff8001116ef860] __wait_for_common at ffff800008dd166c
 #5 [ffff8001116ef8e0] wait_for_completion_interruptible at ffff800008dd1898
 #6 [ffff8001116ef8f0] handle_async_copy at ffff8000055142f4 [nfsv4]
 ayufan-rock64#7 [ffff8001116ef970] _nfs42_proc_copy at ffff8000055147c8 [nfsv4]
 ayufan-rock64#8 [ffff8001116efa80] nfs42_proc_copy at ffff800005514cf0 [nfsv4]
 ayufan-rock64#9 [ffff8001116efc50] __nfs4_copy_file_range.constprop.0 at ffff8000054ed694 [nfsv4]

The NULL-pointer dereference was due to nfs42_complete_copies() listed
the nfs_server->ss_copies by the field ss_copies of nfs4_copy_state.
So the nfs4_copy_state address ffff0100f98fa3f0 was offset by 0x10 and
the data accessed through this pointer was also incorrect. Generally,
the ordered list nfs4_state_owner->so_states indicate open(O_RDWR) or
open(O_WRITE) states are reclaimed firstly by nfs4_reclaim_open_state().
When destination state reclaim is failed with NFS_STATE_RECOVERY_FAILED
and copies are not deleted in nfs_server->ss_copies, the source state
may be passed to the nfs42_complete_copies() process earlier, resulting
in this crash scene finally. To solve this issue, we add a list_head
nfs_server->ss_src_copies for a server-to-server copy specially.

Fixes: 0e65a32 ("NFS: handle source server reboot")
Signed-off-by: Yanjun Zhang <zhangyanjun@cestc.cn>
Reviewed-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
scpcom pushed a commit to scpcom/linux that referenced this pull request Nov 20, 2024
@gregkh
net: enetc: block concurrent XDP transmissions during ring reconfigur…
3718434 
…ation

commit c728a95 upstream.

When testing the XDP_REDIRECT function on the LS1028A platform, we
found a very reproducible issue that the Tx frames can no longer be
sent out even if XDP_REDIRECT is turned off. Specifically, if there
is a lot of traffic on Rx direction, when XDP_REDIRECT is turned on,
the console may display some warnings like "timeout for tx ring #6
clear", and all redirected frames will be dropped, the detailed log
is as follows.

root@ls1028ardb:~# ./xdp-bench redirect eno0 eno2
Redirecting from eno0 (ifindex 3; driver fsl_enetc) to eno2 (ifindex 4; driver fsl_enetc)
[203.849809] fsl_enetc 0000:00:00.2 eno2: timeout for tx ring #5 clear
[204.006051] fsl_enetc 0000:00:00.2 eno2: timeout for tx ring #6 clear
[204.161944] fsl_enetc 0000:00:00.2 eno2: timeout for tx ring ayufan-rock64#7 clear
eno0->eno2     1420505 rx/s       1420590 err,drop/s      0 xmit/s
  xmit eno0->eno2    0 xmit/s     1420590 drop/s     0 drv_err/s     15.71 bulk-avg
eno0->eno2     1420484 rx/s       1420485 err,drop/s      0 xmit/s
  xmit eno0->eno2    0 xmit/s     1420485 drop/s     0 drv_err/s     15.71 bulk-avg

By analyzing the XDP_REDIRECT implementation of enetc driver, the
driver will reconfigure Tx and Rx BD rings when a bpf program is
installed or uninstalled, but there is no mechanisms to block the
redirected frames when enetc driver reconfigures rings. Similarly,
XDP_TX verdicts on received frames can also lead to frames being
enqueued in the Tx rings. Because XDP ignores the state set by the
netif_tx_wake_queue() API, so introduce the ENETC_TX_DOWN flag to
suppress transmission of XDP frames.

Fixes: c33bfaf ("net: enetc: set up XDP program under enetc_reconfigure()")
Cc: stable@vger.kernel.org
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20241010092056.298128-3-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
scpcom pushed a commit to scpcom/linux that referenced this pull request Nov 20, 2024
@gregkh
net: enetc: disable Tx BD rings after they are empty
a419f47 
commit 0a93f2c upstream.

The Tx BD rings are disabled first in enetc_stop() and the driver
waits for them to become empty. This operation is not safe while
the ring is actively transmitting frames, and will cause the ring
to not be empty and hardware exception. As described in the NETC
block guide, software should only disable an active Tx ring after
all pending ring entries have been consumed (i.e. when PI = CI).
Disabling a transmit ring that is actively processing BDs risks
a HW-SW race hazard whereby a hardware resource becomes assigned
to work on one or more ring entries only to have those entries be
removed due to the ring becoming disabled.

When testing XDP_REDIRECT feautre, although all frames were blocked
from being put into Tx rings during ring reconfiguration, the similar
warning log was still encountered:

fsl_enetc 0000:00:00.2 eno2: timeout for tx ring #6 clear
fsl_enetc 0000:00:00.2 eno2: timeout for tx ring ayufan-rock64#7 clear

The reason is that when there are still unsent frames in the Tx ring,
disabling the Tx ring causes the remaining frames to be unable to be
sent out. And the Tx ring cannot be restored, which means that even
if the xdp program is uninstalled, the Tx frames cannot be sent out
anymore. Therefore, correct the operation order in enect_start() and
enect_stop().

Fixes: ff58fda ("net: enetc: prioritize ability to go down over packet processing")
Cc: stable@vger.kernel.org
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20241010092056.298128-4-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
scpcom pushed a commit to scpcom/linux that referenced this pull request Jan 20, 2025
@q2ven @gregkh
tipc: Fix use-after-free of kernel socket in cleanup_bearer().
4e69457 
[ Upstream commit 6a2fa13 ]

syzkaller reported a use-after-free of UDP kernel socket
in cleanup_bearer() without repro. [0][1]

When bearer_disable() calls tipc_udp_disable(), cleanup
of the UDP kernel socket is deferred by work calling
cleanup_bearer().

tipc_net_stop() waits for such works to finish by checking
tipc_net(net)->wq_count.  However, the work decrements the
count too early before releasing the kernel socket,
unblocking cleanup_net() and resulting in use-after-free.

Let's move the decrement after releasing the socket in
cleanup_bearer().

[0]:
ref_tracker: net notrefcnt@000000009b3d1faf has 1/1 users at
     sk_alloc+0x438/0x608
     inet_create+0x4c8/0xcb0
     __sock_create+0x350/0x6b8
     sock_create_kern+0x58/0x78
     udp_sock_create4+0x68/0x398
     udp_sock_create+0x88/0xc8
     tipc_udp_enable+0x5e8/0x848
     __tipc_nl_bearer_enable+0x84c/0xed8
     tipc_nl_bearer_enable+0x38/0x60
     genl_family_rcv_msg_doit+0x170/0x248
     genl_rcv_msg+0x400/0x5b0
     netlink_rcv_skb+0x1dc/0x398
     genl_rcv+0x44/0x68
     netlink_unicast+0x678/0x8b0
     netlink_sendmsg+0x5e4/0x898
     ____sys_sendmsg+0x500/0x830

[1]:
BUG: KMSAN: use-after-free in udp_hashslot include/net/udp.h:85 [inline]
BUG: KMSAN: use-after-free in udp_lib_unhash+0x3b8/0x930 net/ipv4/udp.c:1979
 udp_hashslot include/net/udp.h:85 [inline]
 udp_lib_unhash+0x3b8/0x930 net/ipv4/udp.c:1979
 sk_common_release+0xaf/0x3f0 net/core/sock.c:3820
 inet_release+0x1e0/0x260 net/ipv4/af_inet.c:437
 inet6_release+0x6f/0xd0 net/ipv6/af_inet6.c:489
 __sock_release net/socket.c:658 [inline]
 sock_release+0xa0/0x210 net/socket.c:686
 cleanup_bearer+0x42d/0x4c0 net/tipc/udp_media.c:819
 process_one_work kernel/workqueue.c:3229 [inline]
 process_scheduled_works+0xcaf/0x1c90 kernel/workqueue.c:3310
 worker_thread+0xf6c/0x1510 kernel/workqueue.c:3391
 kthread+0x531/0x6b0 kernel/kthread.c:389
 ret_from_fork+0x60/0x80 arch/x86/kernel/process.c:147
 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:244

Uninit was created at:
 slab_free_hook mm/slub.c:2269 [inline]
 slab_free mm/slub.c:4580 [inline]
 kmem_cache_free+0x207/0xc40 mm/slub.c:4682
 net_free net/core/net_namespace.c:454 [inline]
 cleanup_net+0x16f2/0x19d0 net/core/net_namespace.c:647
 process_one_work kernel/workqueue.c:3229 [inline]
 process_scheduled_works+0xcaf/0x1c90 kernel/workqueue.c:3310
 worker_thread+0xf6c/0x1510 kernel/workqueue.c:3391
 kthread+0x531/0x6b0 kernel/kthread.c:389
 ret_from_fork+0x60/0x80 arch/x86/kernel/process.c:147
 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:244

CPU: 0 UID: 0 PID: 54 Comm: kworker/0:2 Not tainted 6.12.0-rc1-00131-gf66ebf37d69c ayufan-rock64#7 91723d6f74857f70725e1583cba3cf4adc716cfa
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
Workqueue: events cleanup_bearer

Fixes: 26abe14 ("net: Modify sk_alloc to not reference count the netns of kernel sockets.")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20241127050512.28438-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
scpcom pushed a commit to scpcom/linux that referenced this pull request Jan 20, 2025
@Seiji-Nishikawa @gregkh
mm: vmscan: account for free pages to prevent infinite Loop in thrott…
66cd376 
…le_direct_reclaim()

commit 6aaced5 upstream.

The task sometimes continues looping in throttle_direct_reclaim() because
allow_direct_reclaim(pgdat) keeps returning false.

 #0 [ffff80002cb6f8d0] __switch_to at ffff8000080095ac
 #1 [ffff80002cb6f900] __schedule at ffff800008abbd1c
 #2 [ffff80002cb6f990] schedule at ffff800008abc50c
 #3 [ffff80002cb6f9b0] throttle_direct_reclaim at ffff800008273550
 #4 [ffff80002cb6fa20] try_to_free_pages at ffff800008277b68
 #5 [ffff80002cb6fae0] __alloc_pages_nodemask at ffff8000082c4660
 #6 [ffff80002cb6fc50] alloc_pages_vma at ffff8000082e4a98
 ayufan-rock64#7 [ffff80002cb6fca0] do_anonymous_page at ffff80000829f5a8
 ayufan-rock64#8 [ffff80002cb6fce0] __handle_mm_fault at ffff8000082a5974
 ayufan-rock64#9 [ffff80002cb6fd90] handle_mm_fault at ffff8000082a5bd4

At this point, the pgdat contains the following two zones:

        NODE: 4  ZONE: 0  ADDR: ffff00817fffe540  NAME: "DMA32"
          SIZE: 20480  MIN/LOW/HIGH: 11/28/45
          VM_STAT:
                NR_FREE_PAGES: 359
        NR_ZONE_INACTIVE_ANON: 18813
          NR_ZONE_ACTIVE_ANON: 0
        NR_ZONE_INACTIVE_FILE: 50
          NR_ZONE_ACTIVE_FILE: 0
          NR_ZONE_UNEVICTABLE: 0
        NR_ZONE_WRITE_PENDING: 0
                     NR_MLOCK: 0
                    NR_BOUNCE: 0
                   NR_ZSPAGES: 0
            NR_FREE_CMA_PAGES: 0

        NODE: 4  ZONE: 1  ADDR: ffff00817fffec00  NAME: "Normal"
          SIZE: 8454144  PRESENT: 98304  MIN/LOW/HIGH: 68/166/264
          VM_STAT:
                NR_FREE_PAGES: 146
        NR_ZONE_INACTIVE_ANON: 94668
          NR_ZONE_ACTIVE_ANON: 3
        NR_ZONE_INACTIVE_FILE: 735
          NR_ZONE_ACTIVE_FILE: 78
          NR_ZONE_UNEVICTABLE: 0
        NR_ZONE_WRITE_PENDING: 0
                     NR_MLOCK: 0
                    NR_BOUNCE: 0
                   NR_ZSPAGES: 0
            NR_FREE_CMA_PAGES: 0

In allow_direct_reclaim(), while processing ZONE_DMA32, the sum of
inactive/active file-backed pages calculated in zone_reclaimable_pages()
based on the result of zone_page_state_snapshot() is zero.

Additionally, since this system lacks swap, the calculation of inactive/
active anonymous pages is skipped.

        crash> p nr_swap_pages
        nr_swap_pages = $1937 = {
          counter = 0
        }

As a result, ZONE_DMA32 is deemed unreclaimable and skipped, moving on to
the processing of the next zone, ZONE_NORMAL, despite ZONE_DMA32 having
free pages significantly exceeding the high watermark.

The problem is that the pgdat->kswapd_failures hasn't been incremented.

        crash> px ((struct pglist_data *) 0xffff00817fffe540)->kswapd_failures
        $1935 = 0x0

This is because the node deemed balanced.  The node balancing logic in
balance_pgdat() evaluates all zones collectively.  If one or more zones
(e.g., ZONE_DMA32) have enough free pages to meet their watermarks, the
entire node is deemed balanced.  This causes balance_pgdat() to exit early
before incrementing the kswapd_failures, as it considers the overall
memory state acceptable, even though some zones (like ZONE_NORMAL) remain
under significant pressure.


The patch ensures that zone_reclaimable_pages() includes free pages
(NR_FREE_PAGES) in its calculation when no other reclaimable pages are
available (e.g., file-backed or anonymous pages).  This change prevents
zones like ZONE_DMA32, which have sufficient free pages, from being
mistakenly deemed unreclaimable.  By doing so, the patch ensures proper
node balancing, avoids masking pressure on other zones like ZONE_NORMAL,
and prevents infinite loops in throttle_direct_reclaim() caused by
allow_direct_reclaim(pgdat) repeatedly returning false.


The kernel hangs due to a task stuck in throttle_direct_reclaim(), caused
by a node being incorrectly deemed balanced despite pressure in certain
zones, such as ZONE_NORMAL.  This issue arises from
zone_reclaimable_pages() returning 0 for zones without reclaimable file-
backed or anonymous pages, causing zones like ZONE_DMA32 with sufficient
free pages to be skipped.

The lack of swap or reclaimable pages results in ZONE_DMA32 being ignored
during reclaim, masking pressure in other zones.  Consequently,
pgdat->kswapd_failures remains 0 in balance_pgdat(), preventing fallback
mechanisms in allow_direct_reclaim() from being triggered, leading to an
infinite loop in throttle_direct_reclaim().

This patch modifies zone_reclaimable_pages() to account for free pages
(NR_FREE_PAGES) when no other reclaimable pages exist.  This ensures zones
with sufficient free pages are not skipped, enabling proper balancing and
reclaim behavior.

[akpm@linux-foundation.org: coding-style cleanups]
Link: https://lkml.kernel.org/r/20241130164346.436469-1-snishika@redhat.com
Link: https://lkml.kernel.org/r/20241130161236.433747-2-snishika@redhat.com
Fixes: 5a1c84b ("mm: remove reclaim and compaction retry approximations")
Signed-off-by: Seiji Nishikawa <snishika@redhat.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
scpcom pushed a commit to scpcom/linux that referenced this pull request Jan 20, 2025
@q2ven @gregkh
tipc: Fix use-after-free of kernel socket in cleanup_bearer().
650ee9a 
[ Upstream commit 6a2fa13 ]

syzkaller reported a use-after-free of UDP kernel socket
in cleanup_bearer() without repro. [0][1]

When bearer_disable() calls tipc_udp_disable(), cleanup
of the UDP kernel socket is deferred by work calling
cleanup_bearer().

tipc_net_stop() waits for such works to finish by checking
tipc_net(net)->wq_count.  However, the work decrements the
count too early before releasing the kernel socket,
unblocking cleanup_net() and resulting in use-after-free.

Let's move the decrement after releasing the socket in
cleanup_bearer().

[0]:
ref_tracker: net notrefcnt@000000009b3d1faf has 1/1 users at
     sk_alloc+0x438/0x608
     inet_create+0x4c8/0xcb0
     __sock_create+0x350/0x6b8
     sock_create_kern+0x58/0x78
     udp_sock_create4+0x68/0x398
     udp_sock_create+0x88/0xc8
     tipc_udp_enable+0x5e8/0x848
     __tipc_nl_bearer_enable+0x84c/0xed8
     tipc_nl_bearer_enable+0x38/0x60
     genl_family_rcv_msg_doit+0x170/0x248
     genl_rcv_msg+0x400/0x5b0
     netlink_rcv_skb+0x1dc/0x398
     genl_rcv+0x44/0x68
     netlink_unicast+0x678/0x8b0
     netlink_sendmsg+0x5e4/0x898
     ____sys_sendmsg+0x500/0x830

[1]:
BUG: KMSAN: use-after-free in udp_hashslot include/net/udp.h:85 [inline]
BUG: KMSAN: use-after-free in udp_lib_unhash+0x3b8/0x930 net/ipv4/udp.c:1979
 udp_hashslot include/net/udp.h:85 [inline]
 udp_lib_unhash+0x3b8/0x930 net/ipv4/udp.c:1979
 sk_common_release+0xaf/0x3f0 net/core/sock.c:3820
 inet_release+0x1e0/0x260 net/ipv4/af_inet.c:437
 inet6_release+0x6f/0xd0 net/ipv6/af_inet6.c:489
 __sock_release net/socket.c:658 [inline]
 sock_release+0xa0/0x210 net/socket.c:686
 cleanup_bearer+0x42d/0x4c0 net/tipc/udp_media.c:819
 process_one_work kernel/workqueue.c:3229 [inline]
 process_scheduled_works+0xcaf/0x1c90 kernel/workqueue.c:3310
 worker_thread+0xf6c/0x1510 kernel/workqueue.c:3391
 kthread+0x531/0x6b0 kernel/kthread.c:389
 ret_from_fork+0x60/0x80 arch/x86/kernel/process.c:147
 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:244

Uninit was created at:
 slab_free_hook mm/slub.c:2269 [inline]
 slab_free mm/slub.c:4580 [inline]
 kmem_cache_free+0x207/0xc40 mm/slub.c:4682
 net_free net/core/net_namespace.c:454 [inline]
 cleanup_net+0x16f2/0x19d0 net/core/net_namespace.c:647
 process_one_work kernel/workqueue.c:3229 [inline]
 process_scheduled_works+0xcaf/0x1c90 kernel/workqueue.c:3310
 worker_thread+0xf6c/0x1510 kernel/workqueue.c:3391
 kthread+0x531/0x6b0 kernel/kthread.c:389
 ret_from_fork+0x60/0x80 arch/x86/kernel/process.c:147
 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:244

CPU: 0 UID: 0 PID: 54 Comm: kworker/0:2 Not tainted 6.12.0-rc1-00131-gf66ebf37d69c ayufan-rock64#7 91723d6f74857f70725e1583cba3cf4adc716cfa
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
Workqueue: events cleanup_bearer

Fixes: 26abe14 ("net: Modify sk_alloc to not reference count the netns of kernel sockets.")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20241127050512.28438-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
scpcom pushed a commit to scpcom/linux that referenced this pull request Jan 20, 2025
@Seiji-Nishikawa @gregkh
mm: vmscan: account for free pages to prevent infinite Loop in thrott…
d675fef 
…le_direct_reclaim()

commit 6aaced5 upstream.

The task sometimes continues looping in throttle_direct_reclaim() because
allow_direct_reclaim(pgdat) keeps returning false.

 #0 [ffff80002cb6f8d0] __switch_to at ffff8000080095ac
 #1 [ffff80002cb6f900] __schedule at ffff800008abbd1c
 #2 [ffff80002cb6f990] schedule at ffff800008abc50c
 #3 [ffff80002cb6f9b0] throttle_direct_reclaim at ffff800008273550
 #4 [ffff80002cb6fa20] try_to_free_pages at ffff800008277b68
 #5 [ffff80002cb6fae0] __alloc_pages_nodemask at ffff8000082c4660
 #6 [ffff80002cb6fc50] alloc_pages_vma at ffff8000082e4a98
 ayufan-rock64#7 [ffff80002cb6fca0] do_anonymous_page at ffff80000829f5a8
 ayufan-rock64#8 [ffff80002cb6fce0] __handle_mm_fault at ffff8000082a5974
 ayufan-rock64#9 [ffff80002cb6fd90] handle_mm_fault at ffff8000082a5bd4

At this point, the pgdat contains the following two zones:

        NODE: 4  ZONE: 0  ADDR: ffff00817fffe540  NAME: "DMA32"
          SIZE: 20480  MIN/LOW/HIGH: 11/28/45
          VM_STAT:
                NR_FREE_PAGES: 359
        NR_ZONE_INACTIVE_ANON: 18813
          NR_ZONE_ACTIVE_ANON: 0
        NR_ZONE_INACTIVE_FILE: 50
          NR_ZONE_ACTIVE_FILE: 0
          NR_ZONE_UNEVICTABLE: 0
        NR_ZONE_WRITE_PENDING: 0
                     NR_MLOCK: 0
                    NR_BOUNCE: 0
                   NR_ZSPAGES: 0
            NR_FREE_CMA_PAGES: 0

        NODE: 4  ZONE: 1  ADDR: ffff00817fffec00  NAME: "Normal"
          SIZE: 8454144  PRESENT: 98304  MIN/LOW/HIGH: 68/166/264
          VM_STAT:
                NR_FREE_PAGES: 146
        NR_ZONE_INACTIVE_ANON: 94668
          NR_ZONE_ACTIVE_ANON: 3
        NR_ZONE_INACTIVE_FILE: 735
          NR_ZONE_ACTIVE_FILE: 78
          NR_ZONE_UNEVICTABLE: 0
        NR_ZONE_WRITE_PENDING: 0
                     NR_MLOCK: 0
                    NR_BOUNCE: 0
                   NR_ZSPAGES: 0
            NR_FREE_CMA_PAGES: 0

In allow_direct_reclaim(), while processing ZONE_DMA32, the sum of
inactive/active file-backed pages calculated in zone_reclaimable_pages()
based on the result of zone_page_state_snapshot() is zero.

Additionally, since this system lacks swap, the calculation of inactive/
active anonymous pages is skipped.

        crash> p nr_swap_pages
        nr_swap_pages = $1937 = {
          counter = 0
        }

As a result, ZONE_DMA32 is deemed unreclaimable and skipped, moving on to
the processing of the next zone, ZONE_NORMAL, despite ZONE_DMA32 having
free pages significantly exceeding the high watermark.

The problem is that the pgdat->kswapd_failures hasn't been incremented.

        crash> px ((struct pglist_data *) 0xffff00817fffe540)->kswapd_failures
        $1935 = 0x0

This is because the node deemed balanced.  The node balancing logic in
balance_pgdat() evaluates all zones collectively.  If one or more zones
(e.g., ZONE_DMA32) have enough free pages to meet their watermarks, the
entire node is deemed balanced.  This causes balance_pgdat() to exit early
before incrementing the kswapd_failures, as it considers the overall
memory state acceptable, even though some zones (like ZONE_NORMAL) remain
under significant pressure.


The patch ensures that zone_reclaimable_pages() includes free pages
(NR_FREE_PAGES) in its calculation when no other reclaimable pages are
available (e.g., file-backed or anonymous pages).  This change prevents
zones like ZONE_DMA32, which have sufficient free pages, from being
mistakenly deemed unreclaimable.  By doing so, the patch ensures proper
node balancing, avoids masking pressure on other zones like ZONE_NORMAL,
and prevents infinite loops in throttle_direct_reclaim() caused by
allow_direct_reclaim(pgdat) repeatedly returning false.


The kernel hangs due to a task stuck in throttle_direct_reclaim(), caused
by a node being incorrectly deemed balanced despite pressure in certain
zones, such as ZONE_NORMAL.  This issue arises from
zone_reclaimable_pages() returning 0 for zones without reclaimable file-
backed or anonymous pages, causing zones like ZONE_DMA32 with sufficient
free pages to be skipped.

The lack of swap or reclaimable pages results in ZONE_DMA32 being ignored
during reclaim, masking pressure in other zones.  Consequently,
pgdat->kswapd_failures remains 0 in balance_pgdat(), preventing fallback
mechanisms in allow_direct_reclaim() from being triggered, leading to an
infinite loop in throttle_direct_reclaim().

This patch modifies zone_reclaimable_pages() to account for free pages
(NR_FREE_PAGES) when no other reclaimable pages exist.  This ensures zones
with sufficient free pages are not skipped, enabling proper balancing and
reclaim behavior.

[akpm@linux-foundation.org: coding-style cleanups]
Link: https://lkml.kernel.org/r/20241130164346.436469-1-snishika@redhat.com
Link: https://lkml.kernel.org/r/20241130161236.433747-2-snishika@redhat.com
Fixes: 5a1c84b ("mm: remove reclaim and compaction retry approximations")
Signed-off-by: Seiji Nishikawa <snishika@redhat.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
scpcom pushed a commit to scpcom/linux that referenced this pull request Jan 20, 2025
@q2ven @gregkh
tipc: Fix use-after-free of kernel socket in cleanup_bearer().
d2a4894 
[ Upstream commit 6a2fa13 ]

syzkaller reported a use-after-free of UDP kernel socket
in cleanup_bearer() without repro. [0][1]

When bearer_disable() calls tipc_udp_disable(), cleanup
of the UDP kernel socket is deferred by work calling
cleanup_bearer().

tipc_net_stop() waits for such works to finish by checking
tipc_net(net)->wq_count.  However, the work decrements the
count too early before releasing the kernel socket,
unblocking cleanup_net() and resulting in use-after-free.

Let's move the decrement after releasing the socket in
cleanup_bearer().

[0]:
ref_tracker: net notrefcnt@000000009b3d1faf has 1/1 users at
     sk_alloc+0x438/0x608
     inet_create+0x4c8/0xcb0
     __sock_create+0x350/0x6b8
     sock_create_kern+0x58/0x78
     udp_sock_create4+0x68/0x398
     udp_sock_create+0x88/0xc8
     tipc_udp_enable+0x5e8/0x848
     __tipc_nl_bearer_enable+0x84c/0xed8
     tipc_nl_bearer_enable+0x38/0x60
     genl_family_rcv_msg_doit+0x170/0x248
     genl_rcv_msg+0x400/0x5b0
     netlink_rcv_skb+0x1dc/0x398
     genl_rcv+0x44/0x68
     netlink_unicast+0x678/0x8b0
     netlink_sendmsg+0x5e4/0x898
     ____sys_sendmsg+0x500/0x830

[1]:
BUG: KMSAN: use-after-free in udp_hashslot include/net/udp.h:85 [inline]
BUG: KMSAN: use-after-free in udp_lib_unhash+0x3b8/0x930 net/ipv4/udp.c:1979
 udp_hashslot include/net/udp.h:85 [inline]
 udp_lib_unhash+0x3b8/0x930 net/ipv4/udp.c:1979
 sk_common_release+0xaf/0x3f0 net/core/sock.c:3820
 inet_release+0x1e0/0x260 net/ipv4/af_inet.c:437
 inet6_release+0x6f/0xd0 net/ipv6/af_inet6.c:489
 __sock_release net/socket.c:658 [inline]
 sock_release+0xa0/0x210 net/socket.c:686
 cleanup_bearer+0x42d/0x4c0 net/tipc/udp_media.c:819
 process_one_work kernel/workqueue.c:3229 [inline]
 process_scheduled_works+0xcaf/0x1c90 kernel/workqueue.c:3310
 worker_thread+0xf6c/0x1510 kernel/workqueue.c:3391
 kthread+0x531/0x6b0 kernel/kthread.c:389
 ret_from_fork+0x60/0x80 arch/x86/kernel/process.c:147
 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:244

Uninit was created at:
 slab_free_hook mm/slub.c:2269 [inline]
 slab_free mm/slub.c:4580 [inline]
 kmem_cache_free+0x207/0xc40 mm/slub.c:4682
 net_free net/core/net_namespace.c:454 [inline]
 cleanup_net+0x16f2/0x19d0 net/core/net_namespace.c:647
 process_one_work kernel/workqueue.c:3229 [inline]
 process_scheduled_works+0xcaf/0x1c90 kernel/workqueue.c:3310
 worker_thread+0xf6c/0x1510 kernel/workqueue.c:3391
 kthread+0x531/0x6b0 kernel/kthread.c:389
 ret_from_fork+0x60/0x80 arch/x86/kernel/process.c:147
 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:244

CPU: 0 UID: 0 PID: 54 Comm: kworker/0:2 Not tainted 6.12.0-rc1-00131-gf66ebf37d69c ayufan-rock64#7 91723d6f74857f70725e1583cba3cf4adc716cfa
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
Workqueue: events cleanup_bearer

Fixes: 26abe14 ("net: Modify sk_alloc to not reference count the netns of kernel sockets.")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20241127050512.28438-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
scpcom pushed a commit to scpcom/linux that referenced this pull request Jan 20, 2025
@Seiji-Nishikawa @gregkh
mm: vmscan: account for free pages to prevent infinite Loop in thrott…
63eac98 
…le_direct_reclaim()

commit 6aaced5 upstream.

The task sometimes continues looping in throttle_direct_reclaim() because
allow_direct_reclaim(pgdat) keeps returning false.

 #0 [ffff80002cb6f8d0] __switch_to at ffff8000080095ac
 #1 [ffff80002cb6f900] __schedule at ffff800008abbd1c
 #2 [ffff80002cb6f990] schedule at ffff800008abc50c
 #3 [ffff80002cb6f9b0] throttle_direct_reclaim at ffff800008273550
 #4 [ffff80002cb6fa20] try_to_free_pages at ffff800008277b68
 #5 [ffff80002cb6fae0] __alloc_pages_nodemask at ffff8000082c4660
 #6 [ffff80002cb6fc50] alloc_pages_vma at ffff8000082e4a98
 ayufan-rock64#7 [ffff80002cb6fca0] do_anonymous_page at ffff80000829f5a8
 ayufan-rock64#8 [ffff80002cb6fce0] __handle_mm_fault at ffff8000082a5974
 ayufan-rock64#9 [ffff80002cb6fd90] handle_mm_fault at ffff8000082a5bd4

At this point, the pgdat contains the following two zones:

        NODE: 4  ZONE: 0  ADDR: ffff00817fffe540  NAME: "DMA32"
          SIZE: 20480  MIN/LOW/HIGH: 11/28/45
          VM_STAT:
                NR_FREE_PAGES: 359
        NR_ZONE_INACTIVE_ANON: 18813
          NR_ZONE_ACTIVE_ANON: 0
        NR_ZONE_INACTIVE_FILE: 50
          NR_ZONE_ACTIVE_FILE: 0
          NR_ZONE_UNEVICTABLE: 0
        NR_ZONE_WRITE_PENDING: 0
                     NR_MLOCK: 0
                    NR_BOUNCE: 0
                   NR_ZSPAGES: 0
            NR_FREE_CMA_PAGES: 0

        NODE: 4  ZONE: 1  ADDR: ffff00817fffec00  NAME: "Normal"
          SIZE: 8454144  PRESENT: 98304  MIN/LOW/HIGH: 68/166/264
          VM_STAT:
                NR_FREE_PAGES: 146
        NR_ZONE_INACTIVE_ANON: 94668
          NR_ZONE_ACTIVE_ANON: 3
        NR_ZONE_INACTIVE_FILE: 735
          NR_ZONE_ACTIVE_FILE: 78
          NR_ZONE_UNEVICTABLE: 0
        NR_ZONE_WRITE_PENDING: 0
                     NR_MLOCK: 0
                    NR_BOUNCE: 0
                   NR_ZSPAGES: 0
            NR_FREE_CMA_PAGES: 0

In allow_direct_reclaim(), while processing ZONE_DMA32, the sum of
inactive/active file-backed pages calculated in zone_reclaimable_pages()
based on the result of zone_page_state_snapshot() is zero.

Additionally, since this system lacks swap, the calculation of inactive/
active anonymous pages is skipped.

        crash> p nr_swap_pages
        nr_swap_pages = $1937 = {
          counter = 0
        }

As a result, ZONE_DMA32 is deemed unreclaimable and skipped, moving on to
the processing of the next zone, ZONE_NORMAL, despite ZONE_DMA32 having
free pages significantly exceeding the high watermark.

The problem is that the pgdat->kswapd_failures hasn't been incremented.

        crash> px ((struct pglist_data *) 0xffff00817fffe540)->kswapd_failures
        $1935 = 0x0

This is because the node deemed balanced.  The node balancing logic in
balance_pgdat() evaluates all zones collectively.  If one or more zones
(e.g., ZONE_DMA32) have enough free pages to meet their watermarks, the
entire node is deemed balanced.  This causes balance_pgdat() to exit early
before incrementing the kswapd_failures, as it considers the overall
memory state acceptable, even though some zones (like ZONE_NORMAL) remain
under significant pressure.


The patch ensures that zone_reclaimable_pages() includes free pages
(NR_FREE_PAGES) in its calculation when no other reclaimable pages are
available (e.g., file-backed or anonymous pages).  This change prevents
zones like ZONE_DMA32, which have sufficient free pages, from being
mistakenly deemed unreclaimable.  By doing so, the patch ensures proper
node balancing, avoids masking pressure on other zones like ZONE_NORMAL,
and prevents infinite loops in throttle_direct_reclaim() caused by
allow_direct_reclaim(pgdat) repeatedly returning false.


The kernel hangs due to a task stuck in throttle_direct_reclaim(), caused
by a node being incorrectly deemed balanced despite pressure in certain
zones, such as ZONE_NORMAL.  This issue arises from
zone_reclaimable_pages() returning 0 for zones without reclaimable file-
backed or anonymous pages, causing zones like ZONE_DMA32 with sufficient
free pages to be skipped.

The lack of swap or reclaimable pages results in ZONE_DMA32 being ignored
during reclaim, masking pressure in other zones.  Consequently,
pgdat->kswapd_failures remains 0 in balance_pgdat(), preventing fallback
mechanisms in allow_direct_reclaim() from being triggered, leading to an
infinite loop in throttle_direct_reclaim().

This patch modifies zone_reclaimable_pages() to account for free pages
(NR_FREE_PAGES) when no other reclaimable pages exist.  This ensures zones
with sufficient free pages are not skipped, enabling proper balancing and
reclaim behavior.

[akpm@linux-foundation.org: coding-style cleanups]
Link: https://lkml.kernel.org/r/20241130164346.436469-1-snishika@redhat.com
Link: https://lkml.kernel.org/r/20241130161236.433747-2-snishika@redhat.com
Fixes: 5a1c84b ("mm: remove reclaim and compaction retry approximations")
Signed-off-by: Seiji Nishikawa <snishika@redhat.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
scpcom pushed a commit to scpcom/linux that referenced this pull request Jan 20, 2025
@q2ven @gregkh
tipc: Fix use-after-free of kernel socket in cleanup_bearer().
d62d518 
[ Upstream commit 6a2fa13 ]

syzkaller reported a use-after-free of UDP kernel socket
in cleanup_bearer() without repro. [0][1]

When bearer_disable() calls tipc_udp_disable(), cleanup
of the UDP kernel socket is deferred by work calling
cleanup_bearer().

tipc_net_stop() waits for such works to finish by checking
tipc_net(net)->wq_count.  However, the work decrements the
count too early before releasing the kernel socket,
unblocking cleanup_net() and resulting in use-after-free.

Let's move the decrement after releasing the socket in
cleanup_bearer().

[0]:
ref_tracker: net notrefcnt@000000009b3d1faf has 1/1 users at
     sk_alloc+0x438/0x608
     inet_create+0x4c8/0xcb0
     __sock_create+0x350/0x6b8
     sock_create_kern+0x58/0x78
     udp_sock_create4+0x68/0x398
     udp_sock_create+0x88/0xc8
     tipc_udp_enable+0x5e8/0x848
     __tipc_nl_bearer_enable+0x84c/0xed8
     tipc_nl_bearer_enable+0x38/0x60
     genl_family_rcv_msg_doit+0x170/0x248
     genl_rcv_msg+0x400/0x5b0
     netlink_rcv_skb+0x1dc/0x398
     genl_rcv+0x44/0x68
     netlink_unicast+0x678/0x8b0
     netlink_sendmsg+0x5e4/0x898
     ____sys_sendmsg+0x500/0x830

[1]:
BUG: KMSAN: use-after-free in udp_hashslot include/net/udp.h:85 [inline]
BUG: KMSAN: use-after-free in udp_lib_unhash+0x3b8/0x930 net/ipv4/udp.c:1979
 udp_hashslot include/net/udp.h:85 [inline]
 udp_lib_unhash+0x3b8/0x930 net/ipv4/udp.c:1979
 sk_common_release+0xaf/0x3f0 net/core/sock.c:3820
 inet_release+0x1e0/0x260 net/ipv4/af_inet.c:437
 inet6_release+0x6f/0xd0 net/ipv6/af_inet6.c:489
 __sock_release net/socket.c:658 [inline]
 sock_release+0xa0/0x210 net/socket.c:686
 cleanup_bearer+0x42d/0x4c0 net/tipc/udp_media.c:819
 process_one_work kernel/workqueue.c:3229 [inline]
 process_scheduled_works+0xcaf/0x1c90 kernel/workqueue.c:3310
 worker_thread+0xf6c/0x1510 kernel/workqueue.c:3391
 kthread+0x531/0x6b0 kernel/kthread.c:389
 ret_from_fork+0x60/0x80 arch/x86/kernel/process.c:147
 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:244

Uninit was created at:
 slab_free_hook mm/slub.c:2269 [inline]
 slab_free mm/slub.c:4580 [inline]
 kmem_cache_free+0x207/0xc40 mm/slub.c:4682
 net_free net/core/net_namespace.c:454 [inline]
 cleanup_net+0x16f2/0x19d0 net/core/net_namespace.c:647
 process_one_work kernel/workqueue.c:3229 [inline]
 process_scheduled_works+0xcaf/0x1c90 kernel/workqueue.c:3310
 worker_thread+0xf6c/0x1510 kernel/workqueue.c:3391
 kthread+0x531/0x6b0 kernel/kthread.c:389
 ret_from_fork+0x60/0x80 arch/x86/kernel/process.c:147
 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:244

CPU: 0 UID: 0 PID: 54 Comm: kworker/0:2 Not tainted 6.12.0-rc1-00131-gf66ebf37d69c ayufan-rock64#7 91723d6f74857f70725e1583cba3cf4adc716cfa
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
Workqueue: events cleanup_bearer

Fixes: 26abe14 ("net: Modify sk_alloc to not reference count the netns of kernel sockets.")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20241127050512.28438-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
scpcom pushed a commit to scpcom/linux that referenced this pull request Jan 20, 2025
@Seiji-Nishikawa @gregkh
mm: vmscan: account for free pages to prevent infinite Loop in thrott…
bfb7011 
…le_direct_reclaim()

commit 6aaced5 upstream.

The task sometimes continues looping in throttle_direct_reclaim() because
allow_direct_reclaim(pgdat) keeps returning false.

 #0 [ffff80002cb6f8d0] __switch_to at ffff8000080095ac
 #1 [ffff80002cb6f900] __schedule at ffff800008abbd1c
 #2 [ffff80002cb6f990] schedule at ffff800008abc50c
 #3 [ffff80002cb6f9b0] throttle_direct_reclaim at ffff800008273550
 #4 [ffff80002cb6fa20] try_to_free_pages at ffff800008277b68
 #5 [ffff80002cb6fae0] __alloc_pages_nodemask at ffff8000082c4660
 #6 [ffff80002cb6fc50] alloc_pages_vma at ffff8000082e4a98
 ayufan-rock64#7 [ffff80002cb6fca0] do_anonymous_page at ffff80000829f5a8
 ayufan-rock64#8 [ffff80002cb6fce0] __handle_mm_fault at ffff8000082a5974
 ayufan-rock64#9 [ffff80002cb6fd90] handle_mm_fault at ffff8000082a5bd4

At this point, the pgdat contains the following two zones:

        NODE: 4  ZONE: 0  ADDR: ffff00817fffe540  NAME: "DMA32"
          SIZE: 20480  MIN/LOW/HIGH: 11/28/45
          VM_STAT:
                NR_FREE_PAGES: 359
        NR_ZONE_INACTIVE_ANON: 18813
          NR_ZONE_ACTIVE_ANON: 0
        NR_ZONE_INACTIVE_FILE: 50
          NR_ZONE_ACTIVE_FILE: 0
          NR_ZONE_UNEVICTABLE: 0
        NR_ZONE_WRITE_PENDING: 0
                     NR_MLOCK: 0
                    NR_BOUNCE: 0
                   NR_ZSPAGES: 0
            NR_FREE_CMA_PAGES: 0

        NODE: 4  ZONE: 1  ADDR: ffff00817fffec00  NAME: "Normal"
          SIZE: 8454144  PRESENT: 98304  MIN/LOW/HIGH: 68/166/264
          VM_STAT:
                NR_FREE_PAGES: 146
        NR_ZONE_INACTIVE_ANON: 94668
          NR_ZONE_ACTIVE_ANON: 3
        NR_ZONE_INACTIVE_FILE: 735
          NR_ZONE_ACTIVE_FILE: 78
          NR_ZONE_UNEVICTABLE: 0
        NR_ZONE_WRITE_PENDING: 0
                     NR_MLOCK: 0
                    NR_BOUNCE: 0
                   NR_ZSPAGES: 0
            NR_FREE_CMA_PAGES: 0

In allow_direct_reclaim(), while processing ZONE_DMA32, the sum of
inactive/active file-backed pages calculated in zone_reclaimable_pages()
based on the result of zone_page_state_snapshot() is zero.

Additionally, since this system lacks swap, the calculation of inactive/
active anonymous pages is skipped.

        crash> p nr_swap_pages
        nr_swap_pages = $1937 = {
          counter = 0
        }

As a result, ZONE_DMA32 is deemed unreclaimable and skipped, moving on to
the processing of the next zone, ZONE_NORMAL, despite ZONE_DMA32 having
free pages significantly exceeding the high watermark.

The problem is that the pgdat->kswapd_failures hasn't been incremented.

        crash> px ((struct pglist_data *) 0xffff00817fffe540)->kswapd_failures
        $1935 = 0x0

This is because the node deemed balanced.  The node balancing logic in
balance_pgdat() evaluates all zones collectively.  If one or more zones
(e.g., ZONE_DMA32) have enough free pages to meet their watermarks, the
entire node is deemed balanced.  This causes balance_pgdat() to exit early
before incrementing the kswapd_failures, as it considers the overall
memory state acceptable, even though some zones (like ZONE_NORMAL) remain
under significant pressure.


The patch ensures that zone_reclaimable_pages() includes free pages
(NR_FREE_PAGES) in its calculation when no other reclaimable pages are
available (e.g., file-backed or anonymous pages).  This change prevents
zones like ZONE_DMA32, which have sufficient free pages, from being
mistakenly deemed unreclaimable.  By doing so, the patch ensures proper
node balancing, avoids masking pressure on other zones like ZONE_NORMAL,
and prevents infinite loops in throttle_direct_reclaim() caused by
allow_direct_reclaim(pgdat) repeatedly returning false.


The kernel hangs due to a task stuck in throttle_direct_reclaim(), caused
by a node being incorrectly deemed balanced despite pressure in certain
zones, such as ZONE_NORMAL.  This issue arises from
zone_reclaimable_pages() returning 0 for zones without reclaimable file-
backed or anonymous pages, causing zones like ZONE_DMA32 with sufficient
free pages to be skipped.

The lack of swap or reclaimable pages results in ZONE_DMA32 being ignored
during reclaim, masking pressure in other zones.  Consequently,
pgdat->kswapd_failures remains 0 in balance_pgdat(), preventing fallback
mechanisms in allow_direct_reclaim() from being triggered, leading to an
infinite loop in throttle_direct_reclaim().

This patch modifies zone_reclaimable_pages() to account for free pages
(NR_FREE_PAGES) when no other reclaimable pages exist.  This ensures zones
with sufficient free pages are not skipped, enabling proper balancing and
reclaim behavior.

[akpm@linux-foundation.org: coding-style cleanups]
Link: https://lkml.kernel.org/r/20241130164346.436469-1-snishika@redhat.com
Link: https://lkml.kernel.org/r/20241130161236.433747-2-snishika@redhat.com
Fixes: 5a1c84b ("mm: remove reclaim and compaction retry approximations")
Signed-off-by: Seiji Nishikawa <snishika@redhat.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
scpcom pushed a commit to scpcom/linux that referenced this pull request Jan 20, 2025
@q2ven @gregkh
tipc: Fix use-after-free of kernel socket in cleanup_bearer().
d00d447 
[ Upstream commit 6a2fa13 ]

syzkaller reported a use-after-free of UDP kernel socket
in cleanup_bearer() without repro. [0][1]

When bearer_disable() calls tipc_udp_disable(), cleanup
of the UDP kernel socket is deferred by work calling
cleanup_bearer().

tipc_net_stop() waits for such works to finish by checking
tipc_net(net)->wq_count.  However, the work decrements the
count too early before releasing the kernel socket,
unblocking cleanup_net() and resulting in use-after-free.

Let's move the decrement after releasing the socket in
cleanup_bearer().

[0]:
ref_tracker: net notrefcnt@000000009b3d1faf has 1/1 users at
     sk_alloc+0x438/0x608
     inet_create+0x4c8/0xcb0
     __sock_create+0x350/0x6b8
     sock_create_kern+0x58/0x78
     udp_sock_create4+0x68/0x398
     udp_sock_create+0x88/0xc8
     tipc_udp_enable+0x5e8/0x848
     __tipc_nl_bearer_enable+0x84c/0xed8
     tipc_nl_bearer_enable+0x38/0x60
     genl_family_rcv_msg_doit+0x170/0x248
     genl_rcv_msg+0x400/0x5b0
     netlink_rcv_skb+0x1dc/0x398
     genl_rcv+0x44/0x68
     netlink_unicast+0x678/0x8b0
     netlink_sendmsg+0x5e4/0x898
     ____sys_sendmsg+0x500/0x830

[1]:
BUG: KMSAN: use-after-free in udp_hashslot include/net/udp.h:85 [inline]
BUG: KMSAN: use-after-free in udp_lib_unhash+0x3b8/0x930 net/ipv4/udp.c:1979
 udp_hashslot include/net/udp.h:85 [inline]
 udp_lib_unhash+0x3b8/0x930 net/ipv4/udp.c:1979
 sk_common_release+0xaf/0x3f0 net/core/sock.c:3820
 inet_release+0x1e0/0x260 net/ipv4/af_inet.c:437
 inet6_release+0x6f/0xd0 net/ipv6/af_inet6.c:489
 __sock_release net/socket.c:658 [inline]
 sock_release+0xa0/0x210 net/socket.c:686
 cleanup_bearer+0x42d/0x4c0 net/tipc/udp_media.c:819
 process_one_work kernel/workqueue.c:3229 [inline]
 process_scheduled_works+0xcaf/0x1c90 kernel/workqueue.c:3310
 worker_thread+0xf6c/0x1510 kernel/workqueue.c:3391
 kthread+0x531/0x6b0 kernel/kthread.c:389
 ret_from_fork+0x60/0x80 arch/x86/kernel/process.c:147
 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:244

Uninit was created at:
 slab_free_hook mm/slub.c:2269 [inline]
 slab_free mm/slub.c:4580 [inline]
 kmem_cache_free+0x207/0xc40 mm/slub.c:4682
 net_free net/core/net_namespace.c:454 [inline]
 cleanup_net+0x16f2/0x19d0 net/core/net_namespace.c:647
 process_one_work kernel/workqueue.c:3229 [inline]
 process_scheduled_works+0xcaf/0x1c90 kernel/workqueue.c:3310
 worker_thread+0xf6c/0x1510 kernel/workqueue.c:3391
 kthread+0x531/0x6b0 kernel/kthread.c:389
 ret_from_fork+0x60/0x80 arch/x86/kernel/process.c:147
 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:244

CPU: 0 UID: 0 PID: 54 Comm: kworker/0:2 Not tainted 6.12.0-rc1-00131-gf66ebf37d69c ayufan-rock64#7 91723d6f74857f70725e1583cba3cf4adc716cfa
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
Workqueue: events cleanup_bearer

Fixes: 26abe14 ("net: Modify sk_alloc to not reference count the netns of kernel sockets.")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20241127050512.28438-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
scpcom pushed a commit to scpcom/linux that referenced this pull request Jan 20, 2025
@Seiji-Nishikawa @gregkh
mm: vmscan: account for free pages to prevent infinite Loop in thrott…
1ff2302 
…le_direct_reclaim()

commit 6aaced5 upstream.

The task sometimes continues looping in throttle_direct_reclaim() because
allow_direct_reclaim(pgdat) keeps returning false.

 #0 [ffff80002cb6f8d0] __switch_to at ffff8000080095ac
 #1 [ffff80002cb6f900] __schedule at ffff800008abbd1c
 #2 [ffff80002cb6f990] schedule at ffff800008abc50c
 #3 [ffff80002cb6f9b0] throttle_direct_reclaim at ffff800008273550
 #4 [ffff80002cb6fa20] try_to_free_pages at ffff800008277b68
 #5 [ffff80002cb6fae0] __alloc_pages_nodemask at ffff8000082c4660
 #6 [ffff80002cb6fc50] alloc_pages_vma at ffff8000082e4a98
 ayufan-rock64#7 [ffff80002cb6fca0] do_anonymous_page at ffff80000829f5a8
 ayufan-rock64#8 [ffff80002cb6fce0] __handle_mm_fault at ffff8000082a5974
 ayufan-rock64#9 [ffff80002cb6fd90] handle_mm_fault at ffff8000082a5bd4

At this point, the pgdat contains the following two zones:

        NODE: 4  ZONE: 0  ADDR: ffff00817fffe540  NAME: "DMA32"
          SIZE: 20480  MIN/LOW/HIGH: 11/28/45
          VM_STAT:
                NR_FREE_PAGES: 359
        NR_ZONE_INACTIVE_ANON: 18813
          NR_ZONE_ACTIVE_ANON: 0
        NR_ZONE_INACTIVE_FILE: 50
          NR_ZONE_ACTIVE_FILE: 0
          NR_ZONE_UNEVICTABLE: 0
        NR_ZONE_WRITE_PENDING: 0
                     NR_MLOCK: 0
                    NR_BOUNCE: 0
                   NR_ZSPAGES: 0
            NR_FREE_CMA_PAGES: 0

        NODE: 4  ZONE: 1  ADDR: ffff00817fffec00  NAME: "Normal"
          SIZE: 8454144  PRESENT: 98304  MIN/LOW/HIGH: 68/166/264
          VM_STAT:
                NR_FREE_PAGES: 146
        NR_ZONE_INACTIVE_ANON: 94668
          NR_ZONE_ACTIVE_ANON: 3
        NR_ZONE_INACTIVE_FILE: 735
          NR_ZONE_ACTIVE_FILE: 78
          NR_ZONE_UNEVICTABLE: 0
        NR_ZONE_WRITE_PENDING: 0
                     NR_MLOCK: 0
                    NR_BOUNCE: 0
                   NR_ZSPAGES: 0
            NR_FREE_CMA_PAGES: 0

In allow_direct_reclaim(), while processing ZONE_DMA32, the sum of
inactive/active file-backed pages calculated in zone_reclaimable_pages()
based on the result of zone_page_state_snapshot() is zero.

Additionally, since this system lacks swap, the calculation of inactive/
active anonymous pages is skipped.

        crash> p nr_swap_pages
        nr_swap_pages = $1937 = {
          counter = 0
        }

As a result, ZONE_DMA32 is deemed unreclaimable and skipped, moving on to
the processing of the next zone, ZONE_NORMAL, despite ZONE_DMA32 having
free pages significantly exceeding the high watermark.

The problem is that the pgdat->kswapd_failures hasn't been incremented.

        crash> px ((struct pglist_data *) 0xffff00817fffe540)->kswapd_failures
        $1935 = 0x0

This is because the node deemed balanced.  The node balancing logic in
balance_pgdat() evaluates all zones collectively.  If one or more zones
(e.g., ZONE_DMA32) have enough free pages to meet their watermarks, the
entire node is deemed balanced.  This causes balance_pgdat() to exit early
before incrementing the kswapd_failures, as it considers the overall
memory state acceptable, even though some zones (like ZONE_NORMAL) remain
under significant pressure.


The patch ensures that zone_reclaimable_pages() includes free pages
(NR_FREE_PAGES) in its calculation when no other reclaimable pages are
available (e.g., file-backed or anonymous pages).  This change prevents
zones like ZONE_DMA32, which have sufficient free pages, from being
mistakenly deemed unreclaimable.  By doing so, the patch ensures proper
node balancing, avoids masking pressure on other zones like ZONE_NORMAL,
and prevents infinite loops in throttle_direct_reclaim() caused by
allow_direct_reclaim(pgdat) repeatedly returning false.


The kernel hangs due to a task stuck in throttle_direct_reclaim(), caused
by a node being incorrectly deemed balanced despite pressure in certain
zones, such as ZONE_NORMAL.  This issue arises from
zone_reclaimable_pages() returning 0 for zones without reclaimable file-
backed or anonymous pages, causing zones like ZONE_DMA32 with sufficient
free pages to be skipped.

The lack of swap or reclaimable pages results in ZONE_DMA32 being ignored
during reclaim, masking pressure in other zones.  Consequently,
pgdat->kswapd_failures remains 0 in balance_pgdat(), preventing fallback
mechanisms in allow_direct_reclaim() from being triggered, leading to an
infinite loop in throttle_direct_reclaim().

This patch modifies zone_reclaimable_pages() to account for free pages
(NR_FREE_PAGES) when no other reclaimable pages exist.  This ensures zones
with sufficient free pages are not skipped, enabling proper balancing and
reclaim behavior.

[akpm@linux-foundation.org: coding-style cleanups]
Link: https://lkml.kernel.org/r/20241130164346.436469-1-snishika@redhat.com
Link: https://lkml.kernel.org/r/20241130161236.433747-2-snishika@redhat.com
Fixes: 5a1c84b ("mm: remove reclaim and compaction retry approximations")
Signed-off-by: Seiji Nishikawa <snishika@redhat.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
scpcom pushed a commit to scpcom/linux that referenced this pull request Jan 20, 2025
@gregkh
mm: hugetlb: independent PMD page table shared count
56b2744 
[ Upstream commit 59d9094 ]

The folio refcount may be increased unexpectly through try_get_folio() by
caller such as split_huge_pages.  In huge_pmd_unshare(), we use refcount
to check whether a pmd page table is shared.  The check is incorrect if
the refcount is increased by the above caller, and this can cause the page
table leaked:

 BUG: Bad page state in process sh  pfn:109324
 page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x66 pfn:0x109324
 flags: 0x17ffff800000000(node=0|zone=2|lastcpupid=0xfffff)
 page_type: f2(table)
 raw: 017ffff800000000 0000000000000000 0000000000000000 0000000000000000
 raw: 0000000000000066 0000000000000000 00000000f2000000 0000000000000000
 page dumped because: nonzero mapcount
 ...
 CPU: 31 UID: 0 PID: 7515 Comm: sh Kdump: loaded Tainted: G    B              6.13.0-rc2master+ ayufan-rock64#7
 Tainted: [B]=BAD_PAGE
 Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
 Call trace:
  show_stack+0x20/0x38 (C)
  dump_stack_lvl+0x80/0xf8
  dump_stack+0x18/0x28
  bad_page+0x8c/0x130
  free_page_is_bad_report+0xa4/0xb0
  free_unref_page+0x3cc/0x620
  __folio_put+0xf4/0x158
  split_huge_pages_all+0x1e0/0x3e8
  split_huge_pages_write+0x25c/0x2d8
  full_proxy_write+0x64/0xd8
  vfs_write+0xcc/0x280
  ksys_write+0x70/0x110
  __arm64_sys_write+0x24/0x38
  invoke_syscall+0x50/0x120
  el0_svc_common.constprop.0+0xc8/0xf0
  do_el0_svc+0x24/0x38
  el0_svc+0x34/0x128
  el0t_64_sync_handler+0xc8/0xd0
  el0t_64_sync+0x190/0x198

The issue may be triggered by damon, offline_page, page_idle, etc, which
will increase the refcount of page table.

1. The page table itself will be discarded after reporting the
   "nonzero mapcount".

2. The HugeTLB page mapped by the page table miss freeing since we
   treat the page table as shared and a shared page table will not be
   unmapped.

Fix it by introducing independent PMD page table shared count.  As
described by comment, pt_index/pt_mm/pt_frag_refcount are used for s390
gmap, x86 pgds and powerpc, pt_share_count is used for x86/arm64/riscv
pmds, so we can reuse the field as pt_share_count.

Link: https://lkml.kernel.org/r/20241216071147.3984217-1-liushixin2@huawei.com
Fixes: 39dde65 ("[PATCH] shared page table for hugetlb page")
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Ken Chen <kenneth.w.chen@intel.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nanyong Sun <sunnanyong@huawei.com>
Cc: Jane Chu <jane.chu@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Reviewers
No reviews
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

Successfully merging this pull request may close these issues.
2 participants
@xalius @ayufan