MCH2022 badge iCE40 gateware

Collection of Verilog ip cores / demos for the MCH2022 badge

More demos, written in Silice: https://github.com/sylefeb/mch2022-silice

Icestudio, a beginner friendly FPGA suite: https://github.com/badgeteam/mch2022-icestudio

Note about submodules

Make sure to clone this repository with all its submodules by using the --recursive option when cloning or running git submodule init and git submodule update after checkout.

Also make sure to update submodules when pulling from upstream.

Welcome

The MCH2022 badge also is a FPGA dev board.

Try loading your first bitstream!

Besides your badge and an USB cable to connect it to your computer on which it will appear as ttyACM0 and ttyACM1 get these two files:

Bitstream loader tool and an bitstream for the FPGA, hello_world.bin.

For loading a ready-made bitstream into the badge, type: webusb_fpga.py hello_world.bin

But as this May Contain Hackers, we hope to introduce many into creating their own designs.

Toolchain "installation"

Get the latest package for your computers architecture: https://github.com/YosysHQ/oss-cad-suite-build/releases

Unpack the toolchain to a suitable place, and - assuming you use Linux - include the toolchain temporarily to your path with the command source ~/path/to/oss-cad-suite/environment. This allows to have multiple versions installed on your computer, but just go for the lastest. One note: Do not try to install packaged Yosys/NextPNR/Icestorm tools that might come with your distro -- the toolchain is advancing very, very quick, and if your distro packaged it three months ago, it is already heavily outdated. The ones in Debian Stable -- Ouch!

Clone this repo git clone --recursive https://github.com/badgeteam/mch2022-firmware-ice40/

Then try to hit make on the Hello World example.

If it succeeded, the freshly synthesised bitstream appears in build-tmp subdir. You can now upload it as described, then try to change the blink pattern a little.

Side note: All of this also works under MinGW, simply using 'mingw32-make', including the python upload script

FPGA-visible hardware on the badge

The FPGA, a Lattice ice40 UP5K, receives its bitstream by the ESP32 on the badge and is equipped with

• a dedicated USB<->UART bridge channel
• an RGB LED
• a parallel mode interface to the LCD for fast graphics
• an external serial QSPI RAM chip
• a PMOD connector that carries 8 FPGA IO lines (or 4 differential pairs), VCC and GND.

Also, using the same wires that are necessary for booting the bitstream, the ESP32 notified the FPGA of the current state of the buttons and provides a mechanism to access data files.

Have a look at the schematic and pin constraints file now.

If you want to think of the badge solely as FPGA dev board, you can ignore most of its other functionality, just keep in mind these handy hints:

• The two UART lines are routed to /dev/ttyACM1, your terminal program selects the baud rate.

• The FPGA should control the RGB LED using the SB_RGBA_DRV hard macro with constant current capabilities instead of a simple Verilog outputs, as that would overdrive at least the red LED.

• The FPGA shall wait for then lcd_mode pin that switches between SPI/parallel mode of the LCD to go high before starting to talk to the LCD, as it is driven by the ESP32.

• Check twice before connecting external voltages to the PMOD :-)

Look at the pin constraints file mch2022-proto4.pcf.

Guide for complete newbies to FPGAs

Let's try for short:

For a bunch of TTL logic chip to do something useful, you need to wire them up - and the way you wire these determines the function of the completed circuit.

A "Field Programmambe Gate Array" contains a grid of "universal gates" called lookup-tables with -in our case- 4 binary inputs and 1 output, and every of these is accompanied by 1 flipflop bit. Nothing special so far. The special sauce of an FPGA is their connection - that there is a dense mesh of wires in different lengths that crisscross the entire chip, with switchbox points that allow to choose how to connect the individual logic elements to the mesh of wires. By selecting which switchboxes to activate, one builds an actual digital circuit on the FPGA.

For your curiosity, here is a DIY FPGA: http://blog.notdot.net/2012/10/Build-your-own-FPGA

You should have an idea by now! You are going to build logic circuits. And you'll probably fall into a rabbit hole :-)

We would love to give you a complete intro, but for time-is-not-infinite reasons, recommend you intros from others instead.

For the ones that prefer reading and want to know everything to design their own RISC-V CPU at the end of the course:

https://github.com/BrunoLevy/learn-fpga/tree/master/FemtoRV/TUTORIALS/FROM_BLINKER_TO_RISCV

For the ones that prefer videos and a calm pace, Shawn Hymel has done a series in 12 parts that really starts at the beginning and explains the scenery you encounter:

https://github.com/ShawnHymel/introduction-to-fpga https://www.digikey.de/en/maker/projects/introduction-to-fpga-part-1-what-is-an-fpga/3ee5f6c8fa594161a655a9f960060893