Rectilinear Grid Pattern for Interface Pattern. #1018
Assignees
Labels
feature
New feature or request
Comments
|
Could you give more explanation about this by some pictures？ |
|
HI,
Picture 1 shows patterns available for “Base Pattern”, you see Rectilinear Grid is an option.
Picture 2 shows available patterns for “Interface Pattern”, Only Rectilinear and Concentric are available.
Rectilinear Grid would be a good option here and I think better than Concentric.
Thank you.
From: SaltWei ***@***.***
Sent: Sunday, January 8, 2023 10:19 PM
To: bambulab/BambuStudio
Cc: wirlybird; Author
Subject: Re: [bambulab/BambuStudio] Rectilinear Grid Pattern for Interface Pattern. (Issue #1018)
Could you give more explanation about this by some pictures？
—
Reply to this email directly, view it on GitHub <#1018 (comment)> , or unsubscribe <https://github.com/notifications/unsubscribe-auth/AGB3OKFCHFPDLHLVCC2LN4DWROGUBANCNFSM6AAAAAATSVS6LA> .
You are receiving this because you authored the thread. <https://github.com/notifications/beacon/AGB3OKBD7M7PILDE55Y4ONLWROGUBA5CNFSM6AAAAAATSVS6LCWGG33NNVSW45C7OR4XAZNMJFZXG5LFINXW23LFNZ2KUY3PNVWWK3TUL5UWJTSR6Y2SM.gif> Message ID: ***@***.***>
|
|
Hi @wirlybird , sorry that I can't find any picture attached. But there is another issue about this. See #1221 . |
|
From my experience I think rectilinear would be best rather than “Grid” pattern.
From: tangketan ***@***.***
Sent: Monday, March 20, 2023 8:07 PM
To: bambulab/BambuStudio
Cc: wirlybird; Mention
Subject: Re: [bambulab/BambuStudio] Rectilinear Grid Pattern for Interface Pattern. (Issue #1018)
Hi @wirlybird <https://github.com/wirlybird> , sorry that I can't find any picture attached. But there is another issue about this. See #1221 <#1221> .
I give an example of "Grid" interface pattern. Is it what you want?
—
Reply to this email directly, view it on GitHub <#1018 (comment)> , or unsubscribe <https://github.com/notifications/unsubscribe-auth/AGB3OKG63DOPFYGFOTY3UJTW5D5LDANCNFSM6AAAAAATSVS6LA> .
You are receiving this because you were mentioned. <https://github.com/notifications/beacon/AGB3OKGHI6NZRVE6XU5KWK3W5D5LDA5CNFSM6AAAAAATSVS6LCWGG33NNVSW45C7OR4XAZNMJFZXG5LFINXW23LFNZ2KUY3PNVWWK3TUL5UWJTSYBOAKC.gif> Message ID: ***@***.***>
|
|
Do you mean an alternative perpendicular linear pattern? Eg. 1st layer is all horizontal lines, then 2nd layer is all vertical lines? |
|
Basic rectilinear pattern. See pictures.
One layer is at a 45 to the X,Y axis, picture 1, then the next layer of the dense support is 90 degrees from the previous layer, picture 2.
In the example I have dense support set to 100% so it is solid. Works best for me.
From: tangketan ***@***.***
Sent: Monday, March 20, 2023 9:44 PM
To: bambulab/BambuStudio
Cc: wirlybird; Mention
Subject: Re: [bambulab/BambuStudio] Rectilinear Grid Pattern for Interface Pattern. (Issue #1018)
Do you mean an alternative perpendicular linear pattern? Eg. 1st layer is all horizontal lines, then 2nd layer is all vertical lines?
—
Reply to this email directly, view it on GitHub <#1018 (comment)> , or unsubscribe <https://github.com/notifications/unsubscribe-auth/AGB3OKBGDAN7E3OHMCZ5IZTW5EIYHANCNFSM6AAAAAATSVS6LA> .
You are receiving this because you were mentioned. <https://github.com/notifications/beacon/AGB3OKB4I3WMSWKWJPU7M6DW5EIYHA5CNFSM6AAAAAATSVS6LCWGG33NNVSW45C7OR4XAZNMJFZXG5LFINXW23LFNZ2KUY3PNVWWK3TUL5UWJTSYBROKA.gif> Message ID: ***@***.***>
|
|
I still can't see your pictures... But I think I've got your point. Basically you want the existing rectilinear pattern, but with perpendicular angles at neighboring layers, right? |
|
Yes, I think that is it.
My pictures are attachments to my email.
From: tangketan ***@***.***
Sent: Tuesday, March 21, 2023 1:08 AM
To: bambulab/BambuStudio
Cc: wirlybird; Mention
Subject: Re: [bambulab/BambuStudio] Rectilinear Grid Pattern for Interface Pattern. (Issue #1018)
I still can't see your pictures... But I think I've got your point. Basically you want the existing rectilinear pattern, but with perpendicular angles at neighboring layers, right?
<https://user-images.githubusercontent.com/13730459/226530191-ea1efd39-04bb-4f4c-a9e2-f6e8d4af43f6.gif> 20230321-140721
—
Reply to this email directly, view it on GitHub <#1018 (comment)> , or unsubscribe <https://github.com/notifications/unsubscribe-auth/AGB3OKD5LF4XNIJPSVDMBZ3W5FAU3ANCNFSM6AAAAAATSVS6LA> .
You are receiving this because you were mentioned. <https://github.com/notifications/beacon/AGB3OKAILY2LINGQK66CQ23W5FAU3A5CNFSM6AAAAAATSVS6LCWGG33NNVSW45C7OR4XAZNMJFZXG5LFINXW23LFNZ2KUY3PNVWWK3TUL5UWJTSYBZBBK.gif> Message ID: ***@***.***>
|
|
Here it is again. Pictures in email.
Basic rectilinear pattern. See pictures.
One layer is at a 45 to the X,Y axis, picture 1, then the next layer of the dense support is 90 degrees from the previous layer, picture 2.
In the example I have dense support set to 100% so it is solid. Works best for me.
From: tangketan ***@***.***
Sent: Tuesday, March 21, 2023 1:08 AM
To: bambulab/BambuStudio
Cc: wirlybird; Mention
Subject: Re: [bambulab/BambuStudio] Rectilinear Grid Pattern for Interface Pattern. (Issue #1018)
I still can't see your pictures... But I think I've got your point. Basically you want the existing rectilinear pattern, but with perpendicular angles at neighboring layers, right?
<https://user-images.githubusercontent.com/13730459/226530191-ea1efd39-04bb-4f4c-a9e2-f6e8d4af43f6.gif> 20230321-140721
—
Reply to this email directly, view it on GitHub <#1018 (comment)> , or unsubscribe <https://github.com/notifications/unsubscribe-auth/AGB3OKD5LF4XNIJPSVDMBZ3W5FAU3ANCNFSM6AAAAAATSVS6LA> .
You are receiving this because you were mentioned. <https://github.com/notifications/beacon/AGB3OKAILY2LINGQK66CQ23W5FAU3A5CNFSM6AAAAAATSVS6LCWGG33NNVSW45C7OR4XAZNMJFZXG5LFINXW23LFNZ2KUY3PNVWWK3TUL5UWJTSYBZBBK.gif> Message ID: ***@***.***>
|
|
Here is a good example of needing to be able to set the “angle” of the infill pattern.
In this case, on two sides of the print, the dense infill is at 90 degrees to the layer above but on the other two sides, red arrow, the last layer of dense infill runs parallel to the layer above. This can cause the layer to bond more aggressively to the support than when the support layer is not parallel to the layer above it.
From: tangketan ***@***.***
Sent: Tuesday, March 21, 2023 1:08 AM
To: bambulab/BambuStudio
Cc: wirlybird; Mention
Subject: Re: [bambulab/BambuStudio] Rectilinear Grid Pattern for Interface Pattern. (Issue #1018)
I still can't see your pictures... But I think I've got your point. Basically you want the existing rectilinear pattern, but with perpendicular angles at neighboring layers, right?
<https://user-images.githubusercontent.com/13730459/226530191-ea1efd39-04bb-4f4c-a9e2-f6e8d4af43f6.gif> 20230321-140721
—
Reply to this email directly, view it on GitHub <#1018 (comment)> , or unsubscribe <https://github.com/notifications/unsubscribe-auth/AGB3OKD5LF4XNIJPSVDMBZ3W5FAU3ANCNFSM6AAAAAATSVS6LA> .
You are receiving this because you were mentioned. <https://github.com/notifications/beacon/AGB3OKAILY2LINGQK66CQ23W5FAU3A5CNFSM6AAAAAATSVS6LCWGG33NNVSW45C7OR4XAZNMJFZXG5LFINXW23LFNZ2KUY3PNVWWK3TUL5UWJTSYBZBBK.gif> Message ID: ***@***.***>
|
|
Email reply of github doesn't seem to work correctly. I didn't see any picture in any of your email replies. |
|
check out https://github.com/bambulab/BambuStudio/releases/tag/v01.06.00.65 can probably be closed now. |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
When the interface extrusions all run in the same direction for multiple layers they tend to start to curl at the edges.
If they curl enough the nozzle can catch on them.
Having the layers run perpendicular helps to prevent this.
The text was updated successfully, but these errors were encountered: