The DS218 has successfully installed the rtd1296 driver. However, it only links up to 1000Base-T.

[kimiakiyamada]

Description of the problem

The DS218 has successfully installed the rtd1296 driver(r8152-rtd1296-2.15.0-7.spk). However, it only links up to 1000Base-T.

Replace this line with your answer.

Description of your products

• the product name of your NAS model
  DS218
  • and output of uname -a command
    Linux TAKOYAKI 4.4.180+ #42661 SMP Fri May 27 17:13:39 CST 2022 aarch64 GNU/Linux synology_rtd1296_ds218
  • DSM version x.x
    DSM 7.1-42661 Update 2

• the product name of the ethernet dongle
  Planex USB-LAN2500R

Description of your environment

• connect directly to a PC or using a Ethernet switch
  • PC: NIC model name or chipset name
  • Ethernet switch: model name
    using Ethernet switch: NEC Aterm bl1000hw, port4 : 10GBASE-T
• cable category (Cat.5e or Cat.6 or Cat.7)
  Cat.5e, Cat.6, Cat.6A

Output of dmesg command

[dmesg_20220611.txt](https://github.com/bb-qq/r8152/files/8895326/dmesg_20220611.txt)

Output of lsusb command

|__usb2          1d6b:0002:0404 09  2.00  480MBit/s 0mA 1IF  (Linux 4.4.180+ xhci-hcd xHCI Host Controller xhci-hcd.2.auto) hub
|__usb3          1d6b:0003:0404 09  3.00 5000MBit/s 0mA 1IF  (Linux 4.4.180+ xhci-hcd xHCI Host Controller xhci-hcd.2.auto) hub
|__usb4          1d6b:0002:0404 09  2.00  480MBit/s 0mA 1IF  (Linux 4.4.180+ xhci-hcd xHCI Host Controller xhci-hcd.5.auto) hub
  |__4-1         0bda:8156:3000 00  2.10  480MBit/s 500mA 1IF  (Planex USB 10/100/1G/2.5G LAN 000000001)
|__usb5          1d6b:0003:0404 09  3.00 5000MBit/s 0mA 1IF  (Linux 4.4.180+ xhci-hcd xHCI Host Controller xhci-hcd.5.auto) hub
|__usb6          1d6b:0002:0404 09  2.00  480MBit/s 0mA 1IF  (Linux 4.4.180+ xhci-hcd xHCI Host Controller xhci-hcd.8.auto) hub
|__usb7          1d6b:0003:0404 09  3.00 5000MBit/s 0mA 1IF  (Linux 4.4.180+ xhci-hcd xHCI Host Controller xhci-hcd.8.auto) hub````

### Output of ``ifconfig -a`` command

eth0 Link encap:Ethernet HWaddr 00:11:32:F5:E4:13
inet addr:192.168.1.254 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::211:32ff:fef5:e413/64 Scope:Link
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:391878 errors:0 dropped:0 overruns:0 frame:0
TX packets:107936 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:93746859 (89.4 MiB) TX bytes:25975939 (24.7 MiB)
Interrupt:11

eth1 Link encap:Ethernet HWaddr 1C:C0:35:03:FC:E3
inet addr:192.168.0.17 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::1ec0:35ff:fe03:fce3/64 Scope:Link
inet6 addr: 240f:6d:2042:1:1ec0:35ff:fe03:fce3/64 Scope:Global
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:130023 errors:0 dropped:0 overruns:0 frame:0
TX packets:259873 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:27811313 (26.5 MiB) TX bytes:303774344 (289.7 MiB)

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:10567 errors:0 dropped:0 overruns:0 frame:0
TX packets:10567 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1
RX bytes:2641382 (2.5 MiB) TX bytes:2641382 (2.5 MiB)

sit0 Link encap:IPv6-in-IPv4
NOARP MTU:1480 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

[kimiakiyamada]

I'm sorry, I've just confirmed that it's a known issue below. Please close this matter.
#136

[bb-qq]

  |__4-1         0bda:8156:3000 00  2.10  480MBit/s 500mA 1IF  (Planex USB 10/100/1G/2.5G LAN 000000001)

This log indicates that the device is recognized as a USB 2.0 device. So changing connecting port might resolve the issue.
But as you pointed out, this model seems to have stability issues.

[bb-qq]

I decided to merge topics on rtd1296 into issue #275.
If you notice anything new, please comment there.