Bump coverage from 5.1 to 7.2.1

[dependabot]

Bumps coverage from 5.1 to 7.2.1.

Release notes

Sourced from coverage's releases.

coverage-5.6b1

• Third-party packages are now ignored in coverage reporting. This solves a few problems:
  • Coverage will no longer report about other people’s code (issue 876). This is true even when using --source=. with a venv in the current directory.
  • Coverage will no longer generate “Already imported a file that will be measured” warnings about coverage itself (issue 905).
• The HTML report uses j/k to move up and down among the highlighted chunks of code. They used to highlight the current chunk, but 5.0 broke that behavior. Now the highlighting is working again.
• The JSON report now includes percent_covered_display, a string with the total percentage, rounded to the same number of decimal places as the other reports’ totals.

coverage-5.5

• coverage combine has a new option, --keep to keep the original data files after combining them. The default is still to delete the files after they have been combined. This was requested in issue 1108 and implemented in pull request 1110. Thanks, Éric Larivière.
• When reporting missing branches in coverage report, branches aren’t reported that jump to missing lines. This adds to the long-standing behavior of not reporting branches from missing lines. Now branches are only reported if both the source and destination lines are executed. Closes both issue 1065 and issue 955.
• Minor improvements to the HTML report:
  • The state of the line visibility selector buttons is saved in local storage so you don’t have to fiddle with them so often, fixing issue 1123.
  • It has a little more room for line numbers so that 4-digit numbers work well, fixing issue 1124.
• Improved the error message when combining line and branch data, so that users will be more likely to understand what’s happening, closing issue 803.

coverage-5.4

• The text report produced by coverage report now always outputs a TOTAL line, even if only one Python file is reported. This makes regex parsing of the output easier. Thanks, Judson Neer. This had been requested a number of times (issue 1086, issue 922, issue 732).
• The skip_covered and skip_empty settings in the configuration file can now be specified in the [html] section, so that text reports and HTML reports can use separate settings. The HTML report will still use the [report] settings if there isn’t a value in the [html] section. Closes issue 1090.
• Combining files on Windows across drives now works properly, fixing issue 577. Thanks, Valentin Lab.
• Fix an obscure warning from deep in the _decimal module, as reported in issue 1084.
• Update to support Python 3.10 alphas in progress, including PEP 626: Precise line numbers for debugging and other tools.

coverage-5.3.1

• When using --source on a large source tree, v5.x was slower than previous versions. This performance regression is now fixed, closing issue 1037.
• Mysterious SQLite errors can happen on PyPy, as reported in issue 1010. An immediate retry seems to fix the problem, although it is an unsatisfying solution.
• The HTML report now saves the sort order in a more widely supported way, fixing issue 986. Thanks, Sebastián Ramírez (pull request 1066).
• The HTML report pages now have a Sleepy Snake favicon.
• Wheels are now provided for manylinux2010, and for PyPy3 (pp36 and pp37).
• Continuous integration has moved from Travis and AppVeyor to GitHub Actions.

coverage-5.3

• The source setting has always been interpreted as either a file path or a module, depending on which existed. If both interpretations were valid, it was assumed to be a file path. The new source_pkgs setting can be used to name a package to disambiguate this case. Thanks, Thomas Grainger. Fixes issue 268.
• If a plugin was disabled due to an exception, we used to still try to record its information, causing an exception, as reported in issue 1011. This is now fixed.

coverage-5.2.1

• The dark mode HTML report still used light colors for the context listing, making them unreadable (issue 1009). This is now fixed.
• The time stamp on the HTML report now includes the time zone. Thanks, Xie Yanbo (pull request 960).

coverage-5.2

• The HTML report has been redesigned by Vince Salvino. There is now a dark mode, the code text is larger, and system sans serif fonts are used, in addition to other small changes (issue 858 and pull request 931).
• The coverage report and coverage html commands now accept a --precision option to control the number of decimal points displayed. Thanks, Teake Nutma (pull request 982).
• The coverage report and coverage html commands now accept a --no-skip-covered option to negate --skip-covered. Thanks, Anthony Sottile (issue 779 and pull request 932).
• The --skip-empty option is now available for the XML report, closing issue 976.
• The coverage report command now accepts a --sort option to specify how to sort the results. Thanks, Jerin Peter George (pull request 1005).
• If coverage fails due to the coverage total not reaching the --fail-under value, it will now print a message making the condition clear. Thanks, Naveen Yadav (pull request 977).
• TOML configuration files with non-ASCII characters would cause errors on Windows (issue 990). This is now fixed.
• The output of --debug=trace now includes information about how the --source option is being interpreted, and the module names being considered.

Changelog

Sourced from coverage's changelog.

Version 7.2.1 — 2023-02-26

• Fix: the PyPI page had broken links to documentation pages, but no longer does, closing issue 1566_.

• Fix: public members of the coverage module are now properly indicated so that mypy will find them, fixing issue 1564_.

.. _issue 1564: nedbat/coveragepy#1564 .. _issue 1566: nedbat/coveragepy#1566

.. _changes_7-2-0:

Version 7.2.0 — 2023-02-22

• Added a new setting [report] exclude_also to let you add more exclusions without overwriting the defaults. Thanks, Alpha Chen <pull 1557_>, closing issue 1391.

• Added a :meth:.CoverageData.purge_files method to remove recorded data for a particular file. Contributed by Stephan Deibel <pull 1547_>_.

• Fix: when reporting commands fail, they will no longer congratulate themselves with messages like "Wrote XML report to file.xml" before spewing a traceback about their failure.

• Fix: arguments in the public API that name file paths now accept pathlib.Path objects. This includes the data_file and config_file arguments to the Coverage constructor and the basename argument to CoverageData. Closes issue 1552_.

• Fix: In some embedded environments, an IndexError could occur on stop() when the originating thread exits before completion. This is now fixed, thanks to Russell Keith-Magee <pull 1543_>, closing issue 1542.

• Added a py.typed file to announce our type-hintedness. Thanks, KotlinIsland <pull 1550_>_.

.. _issue 1391: nedbat/coveragepy#1391 .. _issue 1542: nedbat/coveragepy#1542 .. _pull 1543: nedbat/coveragepy#1543 .. _pull 1547: nedbat/coveragepy#1547 .. _pull 1550: nedbat/coveragepy#1550 .. _issue 1552: nedbat/coveragepy#1552 .. _pull 1557: nedbat/coveragepy#1557

... (truncated)

Commits

• 9fcf1d6 docs: sample html for 7.2.1
• 795a56a docs: prep for 7.2.1
• fe807db docs: build steps need to make a release-prep branch sooner
• c3a3421 fix: export our public names for type checking. #1564
• f217d0d refactor: remove unneeded pydoc weirdness
• 857833e fix: always use full-version rtfd links #1566
• 2f81370 fix(docs): wrong link syntax
• 808daea chore: make upgrade
• e2e9d6e build: bump version
• b14e7f4 docs: latest sample html report
• Additional commits viewable in compare view

Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.

---

Dependabot commands and options

You can trigger Dependabot actions by commenting on this PR:

• @dependabot rebase will rebase this PR
• @dependabot recreate will recreate this PR, overwriting any edits that have been made to it
• @dependabot merge will merge this PR after your CI passes on it
• @dependabot squash and merge will squash and merge this PR after your CI passes on it
• @dependabot cancel merge will cancel a previously requested merge and block automerging
• @dependabot reopen will reopen this PR if it is closed
• @dependabot close will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
• @dependabot ignore this major version will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
• @dependabot ignore this minor version will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
• @dependabot ignore this dependency will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)

[dependabot]

The following labels could not be found: dependencies, autosquash.