Main #106
Main #106
Conversation
this is for an AI ear organ, and this is the header definition Signed-off-by: josefkedwards <cedwards19606389@yahoo.com>
WalkthroughA new header file, Changes
Possibly related PRs
Poem
✨ Finishing Touches
Thank you for using CodeRabbit. We offer it for free to the OSS community and would appreciate your support in helping us grow. If you find it useful, would you consider giving us a shout-out on your favorite social media? 🪧 TipsChatThere are 3 ways to chat with CodeRabbit:
Note: Be mindful of the bot's finite context window. It's strongly recommended to break down tasks such as reading entire modules into smaller chunks. For a focused discussion, use review comments to chat about specific files and their changes, instead of using the PR comments. CodeRabbit Commands (Invoked using PR comments)
Other keywords and placeholders
CodeRabbit Configuration File (
|
![coderabbitai[bot]](https://avatars.githubusercontent.com/in/347564?s=60&v=4){kind=small}
There was a problem hiding this comment.
Actionable comments posted: 2
🧹 Nitpick comments (3)
.ears.h (3)
19-23: Add documentation for struct members.Consider adding descriptive comments for each member to improve code maintainability.
typedef struct { + // Time-domain signal data double *time_domain; + // Frequency-domain representation after FFT double_complex *frequency_domain; + // FFTW plan for efficient transform computation fftw_plan plan; } AudioData;
33-36: Add example usage in documentation.Consider adding an example in the documentation to show the expected format of note names and frequencies.
// Struct to represent musical notes in an octave +// Example: {"A4", 440.0} represents the A note in the 4th octave typedef struct { const char *note; // Note name (e.g., "A4", "C#5") double frequency; // Frequency in Hz } MusicalNote;
47-48: Update the header guard end comment.Update the comment to match the new header guard name.
-#endif // EARS_H +#endif // CODERABBIT_EARS_H
📜 Review details
Configuration used: CodeRabbit UI
Review profile: CHILL
Plan: Pro
📒 Files selected for processing (1)
.ears.h(1 hunks)
⏰ Context from checks skipped due to timeout of 90000ms (1)
- GitHub Check: Summary
🔇 Additional comments (2)
.ears.h (2)
14-14: Review the maximum frequency limit.The MAX_FREQ of 120kHz seems unusually high, as it's far beyond human hearing range (20Hz-20kHz). The comment about "AI hearing range" is misleading as AI systems process digital signals without physical hearing limitations.
Consider if this high frequency range is actually needed for your use case. If not, you might want to reduce it to a more standard range like 20kHz.
39-45: Document function parameters and return values.Add documentation for each function prototype to describe parameters, return values, and behavior.
-void init_audio_data(AudioData **audio_data); +/** + * Initializes audio data structure. + * @param audio_data Double pointer to be allocated and initialized + * @return void + */ +void init_audio_data(AudioData **audio_data);Review the inclusion of Fibonacci sequence generation.
The
generate_fibonacci_sequencefunction seems out of place in an audio processing library. Consider if this functionality belongs elsewhere.Could you explain the relationship between Fibonacci sequences and audio processing in this context?
| #ifndef EARS_H | ||
| #define EARS_H |
There was a problem hiding this comment.
🛠️ Refactor suggestion
Rename the header guard to follow standard naming conventions.
The header guard starts with a dot which is unusual and could cause issues. Consider using a more standard naming convention.
-#ifndef EARS_H
-#define EARS_H
+#ifndef CODERABBIT_EARS_H
+#define CODERABBIT_EARS_H📝 Committable suggestion
‼️ IMPORTANT
Carefully review the code before committing. Ensure that it accurately replaces the highlighted code, contains no missing lines, and has no issues with indentation. Thoroughly test & benchmark the code to ensure it meets the requirements.
| #ifndef EARS_H | |
| #define EARS_H | |
| #ifndef CODERABBIT_EARS_H | |
| #define CODERABBIT_EARS_H |
| typedef struct { | ||
| double cochlea_frequency; // Central frequency of the cochlear response | ||
| double auditory_signal; | ||
| double vestibular_adjustment; | ||
| } InnerEar; |
There was a problem hiding this comment.
🛠️ Refactor suggestion
Review vestibular system inclusion and add units documentation.
Two concerns:
- The
vestibular_adjustmentmember seems out of place as the vestibular system is primarily for balance, not hearing. - The units for each member should be documented.
typedef struct {
- double cochlea_frequency; // Central frequency of the cochlear response
+ double cochlea_frequency; // Central frequency of the cochlear response (Hz)
+ double auditory_signal; // Amplitude of the auditory response (dimensionless)
- double auditory_signal;
- double vestibular_adjustment;
} InnerEar;📝 Committable suggestion
‼️ IMPORTANT
Carefully review the code before committing. Ensure that it accurately replaces the highlighted code, contains no missing lines, and has no issues with indentation. Thoroughly test & benchmark the code to ensure it meets the requirements.
| typedef struct { | |
| double cochlea_frequency; // Central frequency of the cochlear response | |
| double auditory_signal; | |
| double vestibular_adjustment; | |
| } InnerEar; | |
| typedef struct { | |
| double cochlea_frequency; // Central frequency of the cochlear response (Hz) | |
| double auditory_signal; // Amplitude of the auditory response (dimensionless) | |
| } InnerEar; |
There was a problem hiding this comment.
Actionable comments posted: 4
🔭 Outside diff range comments (3)
g.sh (3)
9-10: Remove exposed private key.Never store private keys in source code. This is a severe security risk that could lead to theft of funds.
-private_key = "KzjKQ3uFj5wXHLM1e8w9q3N8HKknwA5ev9uNHRkZFGz9xH4D2M9" +private_key = os.getenv('BITCOIN_PRIVATE_KEY')Also applies to: 99-101
🧰 Tools
🪛 Shellcheck (0.10.0)
[error] 9-9: Remove spaces around = to assign (or use [ ] to compare, or quote '=' if literal).
(SC2283)
[error] 10-10: Remove spaces around = to assign (or use [ ] to compare, or quote '=' if literal).
(SC2283)
🪛 Gitleaks (8.21.2)
9-9: Detected a Generic API Key, potentially exposing access to various services and sensitive operations.
(generic-api-key)
141-154: Resolve inconsistency between mock and real API calls.The code mixes real API calls (
broadcast_transaction) with mock implementations (simulate_broadcast). This is confusing and could lead to errors. Choose either mock or real implementation consistently.Consider creating separate mock and production implementations behind an interface:
class TransactionBroadcaster: def broadcast(self, signed_tx): pass class MockTransactionBroadcaster(TransactionBroadcaster): def broadcast(self, signed_tx): # Mock implementation pass class BlockCypherTransactionBroadcaster(TransactionBroadcaster): def broadcast(self, signed_tx): # Real API implementation passAlso applies to: 236-246
1-280: Duplicate Code Detected: Remove Redundant Functions in g.shThe shell script output confirms multiple duplicate function definitions, including:
def log_action(action, details):def monitor_response():def sign_transaction():def simulate_broadcast(signed_tx, tx):These duplicated code blocks need to be consolidated into a single definition for each function to avoid merge conflicts or copy-paste errors.
🔗 Analysis chain
Fix duplicate code blocks.
The file contains multiple duplicate sections of the same code. This appears to be a merge conflict or copy-paste error. The file needs to be cleaned up to contain only one version of each function.
🏁 Scripts executed
The following scripts were executed for the analysis:
Script:
#!/bin/bash # Description: Find duplicate function definitions # Look for duplicate function definitions echo "Duplicate function definitions:" rg -A 1 "^def \w+\(" g.sh | sort | uniq -dLength of output: 456
🧰 Tools
🪛 Shellcheck (0.10.0)
[error] 1-1: Tips depend on target shell and yours is unknown. Add a shebang or a 'shell' directive.
(SC2148)
[error] 6-6: Remove spaces around = to assign (or use [ ] to compare, or quote '=' if literal).
(SC2283)
[error] 9-9: Remove spaces around = to assign (or use [ ] to compare, or quote '=' if literal).
(SC2283)
[error] 10-10: Remove spaces around = to assign (or use [ ] to compare, or quote '=' if literal).
(SC2283)
[error] 13-13: Remove spaces around = to assign (or use [ ] to compare, or quote '=' if literal).
(SC2283)
[error] 14-14: Remove spaces around = to assign (or use [ ] to compare, or quote '=' if literal).
(SC2283)
[error] 17-17: Remove spaces around = to assign (or use [ ] to compare, or quote '=' if literal).
(SC2283)
[error] 20-20: Remove spaces around = to assign (or use [ ] to compare, or quote '=' if literal).
(SC2283)
[error] 22-22: '(' is invalid here. Did you forget to escape it?
(SC1036)
[error] 22-22: Parsing stopped here. Invalid use of parentheses?
(SC1088)
🪛 Gitleaks (8.21.2)
6-6: Detected a Generic API Key, potentially exposing access to various services and sensitive operations.
(generic-api-key)
9-9: Detected a Generic API Key, potentially exposing access to various services and sensitive operations.
(generic-api-key)
97-97: Detected a Generic API Key, potentially exposing access to various services and sensitive operations.
(generic-api-key)
100-100: Detected a Generic API Key, potentially exposing access to various services and sensitive operations.
(generic-api-key)
192-192: Detected a Generic API Key, potentially exposing access to various services and sensitive operations.
(generic-api-key)
195-195: Detected a Generic API Key, potentially exposing access to various services and sensitive operations.
(generic-api-key)
🧹 Nitpick comments (3)
.devcontainer/bitcoinlib.cpp (3)
42-43: Remove empty documentation comments.The empty
@briefdocumentation comments don't provide any value. Either add meaningful documentation or remove these comments.- /// @brief double amount; - /// @brief bool signed_transaction = true;Also applies to: 45-46
65-66: Revert unnecessary formatting change.The split of
constqualifier across lines reduces readability without adding any value.- std::string get_address() - const { + std::string get_address() const {
97-97: Complete the documentation comment.The documentation comment for
generate_keys()is incomplete. Add a proper description of what the method does.- /// @generation of keys for a wallet + /// @brief Generates a new key pair for the wallet using the secp256k1 curve
📜 Review details
Configuration used: CodeRabbit UI
Review profile: CHILL
Plan: Pro
📒 Files selected for processing (2)
.devcontainer/bitcoinlib.cpp(3 hunks)g.sh(1 hunks)
⏰ Context from checks skipped due to timeout of 90000ms (1)
- GitHub Check: Summary
.devcontainer/bitcoinlib.cpp
Outdated
| @@ -89,8 +92,9 @@ class Wallet { | |||
| std::string private_key; | |||
| std::string public_key; | |||
| std::string address; | |||
| double balance = 0.0; | |||
| double balance = 1.0; | |||
There was a problem hiding this comment.
Reconsider non-zero default balance.
Setting a default balance of 1.0 BTC (~$50,000) could be misleading. A wallet should start with zero balance unless explicitly funded.
- double balance = 1.0;
+ double balance = 0.0;📝 Committable suggestion
‼️ IMPORTANT
Carefully review the code before committing. Ensure that it accurately replaces the highlighted code, contains no missing lines, and has no issues with indentation. Thoroughly test & benchmark the code to ensure it meets the requirements.
| double balance = 1.0; | |
| double balance = 0.0; |
.devcontainer/bitcoinlib.cpp
Outdated
| double amount; | ||
| double fee; | ||
| bool signed_transaction = false; | ||
| /// @brief | ||
| bool signed_transaction = true; |
There was a problem hiding this comment.
Reconsider default transaction signing state.
Setting signed_transaction = true by default could mask signing failures. The transaction should be considered unsigned until explicitly signed.
- bool signed_transaction = true;
+ bool signed_transaction = false;📝 Committable suggestion
‼️ IMPORTANT
Carefully review the code before committing. Ensure that it accurately replaces the highlighted code, contains no missing lines, and has no issues with indentation. Thoroughly test & benchmark the code to ensure it meets the requirements.
| bool signed_transaction = true; | |
| bool signed_transaction = false; |
| @@ -1,6 +1,6 @@ | |||
| import time | |||
| import json | |||
| from bitcoin import * | |||
| from bitcoin import | |||
|
|
|||
| # BlockCypher API Token | |||
| api_token = "8bd4fa2488614e509a677103b88b95fc" | |||
There was a problem hiding this comment.
Remove hardcoded API token.
Hardcoding API tokens in source code is a security risk. The token should be stored securely and loaded from environment variables.
-api_token = "8bd4fa2488614e509a677103b88b95fc"
+api_token = os.getenv('BLOCKCYPHER_API_TOKEN')Add this import at the top of the file:
import osAlso applies to: 96-97
🧰 Tools
🪛 Shellcheck (0.10.0)
[error] 6-6: Remove spaces around = to assign (or use [ ] to compare, or quote '=' if literal).
(SC2283)
🪛 Gitleaks (8.21.2)
6-6: Detected a Generic API Key, potentially exposing access to various services and sensitive operations.
(generic-api-key)
| @@ -1,6 +1,6 @@ | |||
| import time | |||
| import json | |||
| from bitcoin import * | |||
| from bitcoin import | |||
There was a problem hiding this comment.
Fix incomplete import statement.
The import statement is incomplete and will cause syntax errors.
-from bitcoin import
+from bitcoin import * # If you need all functions
# OR
+import bitcoin # If you want to use qualified names📝 Committable suggestion
‼️ IMPORTANT
Carefully review the code before committing. Ensure that it accurately replaces the highlighted code, contains no missing lines, and has no issues with indentation. Thoroughly test & benchmark the code to ensure it meets the requirements.
| from bitcoin import | |
| -from bitcoin import | |
| +from bitcoin import * # If you need all functions | |
| +# OR | |
| +import bitcoin # If you want to use qualified names |
There was a problem hiding this comment.
Actionable comments posted: 0
🔭 Outside diff range comments (2)
Finn.py (2)
33-36: Add error handling to the retrain_model method.The retrain_model method lacks proper error handling, which could lead to silent failures.
Apply this diff to improve error handling:
def retrain_model(self): - # Simulated model improvement logic - print(f"Retraining model with {len(self.feedback_data)} feedback entries.") + try: + if not self.feedback_data: + raise ValueError("No feedback data available for retraining") + if not self.model: + raise ValueError("No model available for retraining") + # Simulated model improvement logic + print(f"Retraining model with {len(self.feedback_data)} feedback entries.") + return True + except Exception as e: + print(f"Error during model retraining: {str(e)}") + raise
76-104: Enhance API security and response models.The endpoints could benefit from additional security measures and explicit response models.
Add rate limiting and response models:
+from fastapi import Security +from fastapi.security import APIKeyHeader +from fastapi.responses import JSONResponse +from slowapi import Limiter +from slowapi.util import get_remote_address + +api_key_header = APIKeyHeader(name="X-API-Key") +limiter = Limiter(key_func=get_remote_address) + +class PredictionResponse(BaseModel): + text: str + sentiment: str + emotional_feedback: str + +class FeedbackResponse(BaseModel): + message: str + +class RetrainResponse(BaseModel): + message: str + +class HistoryResponse(BaseModel): + history: List[dict] + @app.post("/predict") +@limiter.limit("5/minute") -async def predict(input: TextInput, model=Depends(load_model)): +async def predict( + input: TextInput, + model=Depends(load_model), + api_key: str = Security(api_key_header) +) -> PredictionResponse:Add similar security enhancements to other endpoints.
🧰 Tools
🪛 Ruff (0.8.2)
77-77: Do not perform function call
Dependsin argument defaults; instead, perform the call within the function, or read the default from a module-level singleton variable(B008)
84-84: Within an
exceptclause, raise exceptions withraise ... from errorraise ... from Noneto distinguish them from errors in exception handling(B904)
🧹 Nitpick comments (3)
.devcontainer/Dockerfile (1)
7-11: CMake Reinstallation Script Execution (Debian):
The RUN command conditionally executes the CMake reinstall script based on the ARG value and then removes the script. This is an effective approach to conditionally rebuild CMake. Consider adding error handling or logging if the script fails in the future.Finn.py (2)
41-46: Consider moving the feedback map to a configuration file.The feedback responses are hardcoded in the EFLL class. Consider moving them to a configuration file for better maintainability.
Create a new file
config/responses.json:{ "emotional_feedback": { "positive": "That's great to hear!", "negative": "I'm sorry to hear that. Let me know how I can help.", "neutral": "Thanks for sharing your thoughts.", "default": "Thank you for your input." } }Then modify the EFLL class:
def provide_emotional_feedback(self, sentiment): - feedback_map = { - "positive": "That's great to hear!", - "negative": "I'm sorry to hear that. Let me know how I can help.", - "neutral": "Thanks for sharing your thoughts." - } - return feedback_map.get(sentiment, "Thank you for your input.") + try: + with open("config/responses.json") as f: + responses = json.load(f) + return responses["emotional_feedback"].get( + sentiment, + responses["emotional_feedback"]["default"] + ) + except Exception as e: + print(f"Error loading responses: {str(e)}") + return "Thank you for your input."
48-66: Consider using FastAPI's dependency injection instead of global variables.The current implementation uses global variables for brain components. Consider using FastAPI's dependency injection system for better testability and maintainability.
Apply this diff to implement dependency injection:
-# ---- Initialize Framework Components ---- -pmll_memory = PMLLMemory() -arll = ARLL(model=None) # Model will be loaded dynamically -efll = EFLL() +def get_pmll_memory(): + return PMLLMemory() + +def get_arll(model=Depends(load_model)): + return ARLL(model=model) + +def get_efll(): + return EFLL() + @app.on_event("startup") def startup_event(): global model model = load_model() - arll.model = model # Link the loaded model to ARLLThen update the endpoints to use dependencies:
@app.post("/predict") -async def predict(input: TextInput, model=Depends(load_model)): +async def predict( + input: TextInput, + model=Depends(load_model), + pmll_memory=Depends(get_pmll_memory), + efll=Depends(get_efll) +):🧰 Tools
🪛 Ruff (0.8.2)
59-59: Within an
exceptclause, raise exceptions withraise ... from errorraise ... from Noneto distinguish them from errors in exception handling(B904)
📜 Review details
Configuration used: CodeRabbit UI
Review profile: CHILL
Plan: Pro
📒 Files selected for processing (2)
.devcontainer/Dockerfile(2 hunks)Finn.py(1 hunks)
⏰ Context from checks skipped due to timeout of 90000ms (1)
- GitHub Check: Summary
🔇 Additional comments (21)
.devcontainer/Dockerfile (20)
1-3: Clear Header Comments for Debian Stage:
The header comments clearly delineate the Debian-based development environment, which improves readability and organization of the Dockerfile.
13-15: Setting Environment Variables (Debian):
The environment variables forVCPKG_INSTALLATION_ROOTandJAVA_HOME_17_X64are clearly set. Ensure that these values match the permissions and directory expectations in subsequent build steps.
17-25: Streamlined Package Installation (Debian):
The apt-get command efficiently installs all required packages and cleans up afterward to reduce image size. The use ofDEBIAN_FRONTEND=noninteractiveis appropriate here.
27-28: Python and Node.js Setup (Debian):
Upgrading pip and installing Yarn in a single RUN command streamlines the Python and Node.js environment setup.
30-33: vcpkg Installation on Debian:
Cloning the vcpkg repository and bootstrapping it is implemented in a single RUN command. Ensure that the target directory (/usr/local/vcpkg) permits write operations during the build process.
35-40: Project Workspace Setup (Debian):
COPY and WORKDIR commands are used correctly to place project files and set the working directory for the container.
42-44: Stage Separation Clarity:
The clear, commented separation of sections (stages) enhances maintainability and guides developers through the different environment setups.
45-47: Ubuntu Base Image Specification:
Selecting the Ubuntu 24.04 base image ensures access to updated packages and tools suitable for C++ development, matching the project’s infrastructure needs.
48-52: Consistent CMake Reinstall Script (Ubuntu):
The Ubuntu stage replicates the conditional execution of the CMake reinstall script from the Debian stage, ensuring consistency in environment setup across different base images.
54-68: Enhanced Package Installation for Ubuntu:
The additional packages for Ubuntu (e.g., gdb, valgrind, clang-18) cover more advanced development and debugging needs. The cleanup of apt-get cache is properly handled.
70-71: Python and Node.js Setup (Ubuntu):
As in the Debian stage, upgrading pip and installing Yarn consolidates environment setup on Ubuntu.
73-77: vcpkg Installation (Ubuntu):
The environment variable for vcpkg is updated to/vcpkgin this stage, which appears to be an intentional change to suit the Ubuntu environment. Ensure that this difference is documented and aligns with the build strategy.
79-84: Project Workspace Setup (Ubuntu):
COPY and WORKDIR commands are correctly used to transfer project files and define the workspace in the Ubuntu container.
86-88: Stage Separation for Windows:
The section headers for the Windows-based development environment clearly mark the transition to a different platform, aiding in maintainability.
89-90: Windows Base Image Selection:
Using the .NET Framework SDK image as a base for Windows ensures that you have the necessary tools and libraries for building C++ projects on Windows.
92-94: Chocolatey and Package Installation on Windows:
The RUN command installs Chocolatey and required packages efficiently. Double-check the quoting for the--package-parametersargument to ensure it functions correctly within PowerShell.
96-97: Updating Windows PATH:
Updating the PATH to includemsys64and Git directories is essential for tool accessibility. This is properly executed using the ENV command.
99-102: vcpkg Installation on Windows:
Cloning and bootstrapping vcpkg on Windows is clearly implemented. Verify that the commands execute as expected in the Windows shell environment.
104-107: Project Workspace Setup (Windows):
The COPY and WORKDIR commands correctly set up the workspace on the Windows container. This mirrors the setups in the Linux stages, maintaining consistency across platforms.
108-109: Default Command for Windows Container:
Setting the default command to PowerShell is appropriate given the Windows image and provides a consistent interactive shell environment.Finn.py (1)
1-2: Verify the necessity of type ignore comments.The added type ignore comments for FastAPI and Pydantic imports might hide real type issues. These libraries are typically well-typed, so let's verify if these comments are truly needed.
Run this script to check type hints and potential issues:
✅ Verification successful
Action: Remove unnecessary type ignores for FastAPI and Pydantic imports.
- The FastAPI and Pydantic libraries include proper type hints, and our investigation confirms no other areas in the repository rely on these
type: ignoredirectives.- A ripgrep search shows the type ignore usage is limited to
Finn.py, and there’s no supporting evidence (aside from an environment metadata error) that these comments are needed.- Consider removing these comments to avoid masking potential type issues and maintain cleaner type checking.
🏁 Scripts executed
The following scripts were executed for the analysis:
Script:
#!/bin/bash # Description: Check FastAPI and Pydantic type hints and potential issues # Check installed versions pip list | grep -E "fastapi|pydantic" # Check if type hints are available python -c " from importlib.metadata import requires for pkg in ['fastapi', 'pydantic']: print(f'\n{pkg} dependencies:') deps = requires(pkg) or [] for dep in deps: if 'typing' in dep.lower(): print(f' {dep}')" # Look for any existing type-related issues rg -l "type:\s*ignore" . || echo "No other type ignores found"Length of output: 1309
There was a problem hiding this comment.
Actionable comments posted: 8
🧹 Nitpick comments (5)
Chatgpt5o/O1.cpp (5)
1-2: CMake minimum version not updated for potential modern features.CMake version 3.10 might be viable; however, consider requiring a higher minimum version if you rely on more up-to-date C++17 features or advanced CMake functionalities.
6-6: Consider using a more descriptive project name.While
PMLL_Blockchainis acceptable, clarifying the scope (e.g.,PMLLBlockchainModule) can help differentiate subprojects in larger codebases.
17-19: Provide descriptions for build options.Providing short descriptions in CMake
option(...)calls helps clarify the purpose of each toggle for new contributors or maintainers.-option(PMLL_BUILD_TESTS "Build tests" ON) +option(PMLL_BUILD_TESTS "Build all unit/integration tests for the project" ON) -option(PMLL_BUILD_EXAMPLES "Build examples" OFF) +option(PMLL_BUILD_EXAMPLES "Build example programs demonstrating usage" OFF)
23-28: Consolidate or parametrize source file listings.Instead of manually maintaining the file list, consider using file globbing or a target-based approach (e.g.,
add_library(...)then linking). If the project grows, a more modular setup will simplify management.
60-67: Consider specifying test frameworks or test subdirectories.As you expand this project, linking to or adding external test frameworks (GoogleTest, Catch2, etc.) in a dedicated directory can streamline test coverage and maintenance.
📜 Review details
Configuration used: CodeRabbit UI
Review profile: CHILL
Plan: Pro
⛔ Files ignored due to path filters (1)
.devcontainer/JKEdwards_Employment_Contract.wasmis excluded by!**/*.wasm
📒 Files selected for processing (3)
.devcontainer/OAUTH.py(1 hunks).devcontainer/Untitled-4.json(1 hunks)Chatgpt5o/O1.cpp(1 hunks)
✅ Files skipped from review due to trivial changes (1)
- .devcontainer/OAUTH.py
🧰 Additional context used
🪛 Biome (1.9.4)
.devcontainer/Untitled-4.json
[error] 7-15: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 15-36: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 36-43: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 43-53: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 54-55: unexpected character =
(parse)
[error] 55-55: unexpected character =
(parse)
[error] 55-55: unexpected character =
(parse)
[error] 55-55: String values must be double quoted.
(parse)
[error] 55-55: String values must be double quoted.
(parse)
[error] 55-55: unexpected character =
(parse)
[error] 55-55: unexpected character =
(parse)
[error] 55-55: unexpected character =
(parse)
[error] 55-56: String values must be double quoted.
(parse)
[error] 56-56: String values must be double quoted.
(parse)
[error] 56-56: String values must be double quoted.
(parse)
[error] 56-56: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 56-56: String values must be double quoted.
(parse)
[error] 56-56: String values must be double quoted.
(parse)
[error] 56-56: String values must be double quoted.
(parse)
[error] 56-57: String values must be double quoted.
(parse)
[error] 57-57: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 57-57: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 57-57: String values must be double quoted.
(parse)
[error] 57-58: String values must be double quoted.
(parse)
[error] 58-58: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 58-58: JSON standard does not allow single quoted strings
Use double quotes to escape the string.
(parse)
[error] 59-66: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 66-67: String values must be double quoted.
(parse)
[error] 67-67: String values must be double quoted.
(parse)
[error] 67-67: String values must be double quoted.
(parse)
[error] 67-67: unexpected character .
(parse)
[error] 67-67: unexpected character .
(parse)
[error] 67-67: unexpected character .
(parse)
[error] 67-67: unexpected character (
(parse)
[error] 67-67: String values must be double quoted.
(parse)
[error] 67-67: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 67-67: unexpected character )
(parse)
[error] 67-68: String values must be double quoted.
(parse)
[error] 68-68: String values must be double quoted.
(parse)
[error] 68-68: String values must be double quoted.
(parse)
[error] 68-68: unexpected character .
(parse)
[error] 68-68: unexpected character .
(parse)
[error] 68-68: unexpected character .
(parse)
[error] 68-68: unexpected character (
(parse)
[error] 68-68: String values must be double quoted.
(parse)
[error] 68-68: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 68-68: unexpected character )
(parse)
[error] 68-69: String values must be double quoted.
(parse)
[error] 69-69: String values must be double quoted.
(parse)
[error] 69-69: String values must be double quoted.
(parse)
[error] 69-69: unexpected character .
(parse)
[error] 69-69: unexpected character .
(parse)
[error] 69-69: unexpected character .
(parse)
[error] 69-69: unexpected character (
(parse)
[error] 69-69: String values must be double quoted.
(parse)
[error] 69-69: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 69-69: unexpected character )
(parse)
[error] 69-78: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 79-79: unexpected character =
(parse)
[error] 79-79: unexpected character =
(parse)
[error] 79-79: unexpected character =
(parse)
[error] 79-79: String values must be double quoted.
(parse)
[error] 79-79: String values must be double quoted.
(parse)
[error] 79-79: String values must be double quoted.
(parse)
[error] 79-79: unexpected character =
(parse)
[error] 79-79: unexpected character =
(parse)
[error] 79-80: unexpected character =
(parse)
[error] 80-80: String values must be double quoted.
(parse)
[error] 80-81: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 80-80: unexpected character .
(parse)
[error] 80-81: Missing closing quote
The closing quote must be on the same line.
(parse)
[error] 81-81: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 81-81: String values must be double quoted.
(parse)
[error] 81-81: unexpected character .
(parse)
[error] 81-81: unexpected character .
(parse)
[error] 81-81: unexpected character .
(parse)
[error] 81-81: String values must be double quoted.
(parse)
[error] 81-81: unexpected character .
(parse)
[error] 81-81: unexpected character .
(parse)
[error] 81-81: unexpected character .
(parse)
[error] 81-83: String values must be double quoted.
(parse)
[error] 83-83: unexpected character =
(parse)
[error] 83-83: unexpected character =
(parse)
[error] 83-83: unexpected character =
(parse)
[error] 83-83: String values must be double quoted.
(parse)
[error] 83-83: String values must be double quoted.
(parse)
[error] 83-83: String values must be double quoted.
(parse)
[error] 83-84: unexpected character =
(parse)
[error] 84-84: unexpected character =
(parse)
[error] 84-85: unexpected character =
(parse)
[error] 85-153: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
🪛 Cppcheck (2.10-2)
Chatgpt5o/O1.cpp
[error] 54-54: syntax error
(syntaxError)
⏰ Context from checks skipped due to timeout of 90000ms (1)
- GitHub Check: Summary
🔇 Additional comments (3)
Chatgpt5o/O1.cpp (3)
11-13: Double-check C++ standard options.Ensure your target compilers properly support at least C++17 features. The combination of
set(CMAKE_CXX_STANDARD 17)andset(CMAKE_CXX_STANDARD_REQUIRED ON)is standard practice and looks correct.
54-58: Ignore the static analysis false positive.The warning about a syntax error on line 54 likely arises from the conditional
if (MSVC). This is standard CMake usage to detect Microsoft compilers and appears correct.🧰 Tools
🪛 Cppcheck (2.10-2)
[error] 54-54: syntax error
(syntaxError)
78-83: Build summary is helpful.Printing a summary of configuration is a best practice. It helps clarify the active build settings without the need to parse build logs.
…igning, broadcasting, and logging functionality
josefkedwards
added
documentation
Pull request was converted to draft
There was a problem hiding this comment.
Actionable comments posted: 7
♻️ Duplicate comments (1)
.devcontainer/bitcoinlib.cpp (1)
6-6:⚠️ Potential issueCritical: Remove hardcoded sensitive information.
The API token and private key should not be hardcoded in the source code.
Also applies to: 9-10
🧰 Tools
🪛 Gitleaks (8.21.2)
6-6: Detected a Generic API Key, potentially exposing access to various services and sensitive operations.
(generic-api-key)
🧹 Nitpick comments (1)
.devcontainer/Untitled-2.json (1)
1-70: JSON Structure Validity: Well-Formed Log Array.
This file cleanly encapsulates all log entries within a single JSON array, ensuring valid parsing. One suggestion is to verify that the value types (e.g., numeric vs. string) remain consistent across similar fields if needed by downstream processes.
📜 Review details
Configuration used: CodeRabbit UI
Review profile: CHILL
Plan: Pro
📒 Files selected for processing (7)
.devcontainer/Untitled-1.sh(1 hunks).devcontainer/Untitled-2.json(1 hunks).devcontainer/Untitled-3.sh(1 hunks).devcontainer/Untitled-4.json(1 hunks).devcontainer/Untitled-4.sh(1 hunks).devcontainer/bitcoinlib.cpp(1 hunks).devcontainer/import time.py(1 hunks)
🧰 Additional context used
🪛 Shellcheck (0.10.0)
.devcontainer/Untitled-3.sh
[error] 2-2: The shebang must be on the first line. Delete blanks and move comments.
(SC1128)
🪛 Ruff (0.8.2)
.devcontainer/import time.py
3-3: from bitcoin import * used; unable to detect undefined names
(F403)
🪛 Gitleaks (8.21.2)
.devcontainer/bitcoinlib.cpp
6-6: Detected a Generic API Key, potentially exposing access to various services and sensitive operations.
(generic-api-key)
9-9: Detected a Generic API Key, potentially exposing access to various services and sensitive operations.
(generic-api-key)
🪛 Cppcheck (2.10-2)
.devcontainer/bitcoinlib.cpp
[error] 64-64: syntax error
(syntaxError)
🪛 Biome (1.9.4)
.devcontainer/Untitled-4.json
[error] 7-15: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 15-36: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 36-43: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 43-53: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 54-55: unexpected character =
(parse)
[error] 55-55: unexpected character =
(parse)
[error] 55-55: unexpected character =
(parse)
[error] 55-55: String values must be double quoted.
(parse)
[error] 55-55: String values must be double quoted.
(parse)
[error] 55-55: unexpected character =
(parse)
[error] 55-55: unexpected character =
(parse)
[error] 55-55: unexpected character =
(parse)
[error] 55-56: String values must be double quoted.
(parse)
[error] 56-56: String values must be double quoted.
(parse)
[error] 56-56: String values must be double quoted.
(parse)
[error] 56-56: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 56-56: String values must be double quoted.
(parse)
[error] 56-56: String values must be double quoted.
(parse)
[error] 56-56: String values must be double quoted.
(parse)
[error] 56-57: String values must be double quoted.
(parse)
[error] 57-57: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 57-57: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 57-57: String values must be double quoted.
(parse)
[error] 57-58: String values must be double quoted.
(parse)
[error] 58-58: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 58-58: JSON standard does not allow single quoted strings
Use double quotes to escape the string.
(parse)
[error] 59-66: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 66-67: String values must be double quoted.
(parse)
[error] 67-67: String values must be double quoted.
(parse)
[error] 67-67: String values must be double quoted.
(parse)
[error] 67-67: unexpected character .
(parse)
[error] 67-67: unexpected character .
(parse)
[error] 67-67: unexpected character .
(parse)
[error] 67-67: unexpected character (
(parse)
[error] 67-67: String values must be double quoted.
(parse)
[error] 67-67: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 67-67: unexpected character )
(parse)
[error] 67-68: String values must be double quoted.
(parse)
[error] 68-68: String values must be double quoted.
(parse)
[error] 68-68: String values must be double quoted.
(parse)
[error] 68-68: unexpected character .
(parse)
[error] 68-68: unexpected character .
(parse)
[error] 68-68: unexpected character .
(parse)
[error] 68-68: unexpected character (
(parse)
[error] 68-68: String values must be double quoted.
(parse)
[error] 68-68: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 68-68: unexpected character )
(parse)
[error] 68-69: String values must be double quoted.
(parse)
[error] 69-69: String values must be double quoted.
(parse)
[error] 69-69: String values must be double quoted.
(parse)
[error] 69-69: unexpected character .
(parse)
[error] 69-69: unexpected character .
(parse)
[error] 69-69: unexpected character .
(parse)
[error] 69-69: unexpected character (
(parse)
[error] 69-69: String values must be double quoted.
(parse)
[error] 69-69: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 69-69: unexpected character )
(parse)
[error] 69-78: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 79-79: unexpected character =
(parse)
[error] 79-79: unexpected character =
(parse)
[error] 79-79: unexpected character =
(parse)
[error] 79-79: String values must be double quoted.
(parse)
[error] 79-79: String values must be double quoted.
(parse)
[error] 79-79: String values must be double quoted.
(parse)
[error] 79-79: unexpected character =
(parse)
[error] 79-79: unexpected character =
(parse)
[error] 79-80: unexpected character =
(parse)
[error] 80-80: String values must be double quoted.
(parse)
[error] 80-81: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 80-80: unexpected character .
(parse)
[error] 80-81: Missing closing quote
The closing quote must be on the same line.
(parse)
[error] 81-81: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
[error] 81-81: String values must be double quoted.
(parse)
[error] 81-81: unexpected character .
(parse)
[error] 81-81: unexpected character .
(parse)
[error] 81-81: unexpected character .
(parse)
[error] 81-81: String values must be double quoted.
(parse)
[error] 81-81: unexpected character .
(parse)
[error] 81-81: unexpected character .
(parse)
[error] 81-81: unexpected character .
(parse)
[error] 81-83: String values must be double quoted.
(parse)
[error] 83-83: unexpected character =
(parse)
[error] 83-83: unexpected character =
(parse)
[error] 83-83: unexpected character =
(parse)
[error] 83-83: String values must be double quoted.
(parse)
[error] 83-83: String values must be double quoted.
(parse)
[error] 83-83: String values must be double quoted.
(parse)
[error] 83-84: unexpected character =
(parse)
[error] 84-84: unexpected character =
(parse)
[error] 84-85: unexpected character =
(parse)
[error] 85-153: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
⏰ Context from checks skipped due to timeout of 90000ms (1)
- GitHub Check: Summary
🔇 Additional comments (6)
.devcontainer/Untitled-1.sh (1)
1-38: LGTM! Well-structured implementation.The script includes proper error handling, logging functionality, and secure variable usage. Good job on implementing these safety measures!
.devcontainer/Untitled-3.sh (1)
27-30: Deployment Command: Implementation Looks Good.
The deployment section correctly logs the start of the deployment and invokes thecargo contract instantiatecommand with the appropriate parameters..devcontainer/Untitled-4.json (4)
67-69: 🛠️ Refactor suggestion
⚠️ Potential issuePlain-Text Polling Messages Disrupt JSON Format.
The polling messages ("Polling for response... (Attempt 1)", etc.) on lines 67–69 are unstructured plain text. These should be either removed or encapsulated within a JSON object to maintain consistent JSON formatting.Suggested Diff:
Likely invalid or redundant comment.
🧰 Tools
🪛 Biome (1.9.4)
[error] 67-67: String values must be double quoted.
(parse)
[error] 67-67: String values must be double quoted.
(parse)
[error] 67-67: unexpected character
.(parse)
[error] 67-67: unexpected character
.(parse)
[error] 67-67: unexpected character
.(parse)
[error] 67-67: unexpected character
((parse)
[error] 67-67: String values must be double quoted.
(parse)
[error] 67-67: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 67-67: unexpected character
)(parse)
[error] 67-68: String values must be double quoted.
(parse)
[error] 68-68: String values must be double quoted.
(parse)
[error] 68-68: String values must be double quoted.
(parse)
[error] 68-68: unexpected character
.(parse)
[error] 68-68: unexpected character
.(parse)
[error] 68-68: unexpected character
.(parse)
[error] 68-68: unexpected character
((parse)
[error] 68-68: String values must be double quoted.
(parse)
[error] 68-68: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 68-68: unexpected character
)(parse)
[error] 68-69: String values must be double quoted.
(parse)
[error] 69-69: String values must be double quoted.
(parse)
[error] 69-69: String values must be double quoted.
(parse)
[error] 69-69: unexpected character
.(parse)
[error] 69-69: unexpected character
.(parse)
[error] 69-69: unexpected character
.(parse)
[error] 69-69: unexpected character
((parse)
[error] 69-69: String values must be double quoted.
(parse)
[error] 69-69: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 69-69: unexpected character
)(parse)
55-59: 🛠️ Refactor suggestion
⚠️ Potential issueNon-JSON Plain Text Detected.
Lines 55–59 contain plain-text (e.g., "=== Broadcast Summary ===") that breaks the JSON format. To ensure proper parsing, these lines should be removed or converted into a valid JSON structure.Suggested Diff:
Likely invalid or redundant comment.
🧰 Tools
🪛 Biome (1.9.4)
[error] 55-55: unexpected character
=(parse)
[error] 55-55: unexpected character
=(parse)
[error] 55-55: String values must be double quoted.
(parse)
[error] 55-55: String values must be double quoted.
(parse)
[error] 55-55: unexpected character
=(parse)
[error] 55-55: unexpected character
=(parse)
[error] 55-55: unexpected character
=(parse)
[error] 55-56: String values must be double quoted.
(parse)
[error] 56-56: String values must be double quoted.
(parse)
[error] 56-56: String values must be double quoted.
(parse)
[error] 56-56: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 56-56: String values must be double quoted.
(parse)
[error] 56-56: String values must be double quoted.
(parse)
[error] 56-56: String values must be double quoted.
(parse)
[error] 56-57: String values must be double quoted.
(parse)
[error] 57-57: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 57-57: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 57-57: String values must be double quoted.
(parse)
[error] 57-58: String values must be double quoted.
(parse)
[error] 58-58: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 58-58: JSON standard does not allow single quoted strings
Use double quotes to escape the string.
(parse)
79-82: 🛠️ Refactor suggestion
⚠️ Potential issueMixed Plain-Text Section Detected.
The block starting at line 79 with "=== Response from Gavin ===" is plain text and not valid JSON. It should be removed or integrated within the JSON structure (for example, as an additional field in a log object) to preserve overall file validity.Suggested Diff:
Likely invalid or redundant comment.
🧰 Tools
🪛 Biome (1.9.4)
[error] 79-79: unexpected character
=(parse)
[error] 79-79: unexpected character
=(parse)
[error] 79-79: unexpected character
=(parse)
[error] 79-79: String values must be double quoted.
(parse)
[error] 79-79: String values must be double quoted.
(parse)
[error] 79-79: String values must be double quoted.
(parse)
[error] 79-79: unexpected character
=(parse)
[error] 79-79: unexpected character
=(parse)
[error] 79-80: unexpected character
=(parse)
[error] 80-80: String values must be double quoted.
(parse)
[error] 80-81: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 80-80: unexpected character
.(parse)
[error] 80-81: Missing closing quote
The closing quote must be on the same line.
(parse)
[error] 81-81: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 81-81: String values must be double quoted.
(parse)
[error] 81-81: unexpected character
.(parse)
[error] 81-81: unexpected character
.(parse)
[error] 81-81: unexpected character
.(parse)
[error] 81-81: String values must be double quoted.
(parse)
[error] 81-81: unexpected character
.(parse)
[error] 81-81: unexpected character
.(parse)
[error] 81-81: unexpected character
.(parse)
1-54: 🛠️ Refactor suggestion
⚠️ Potential issueInvalid JSON Structure: Multiple Top-Level JSON Objects Detected.
The file starts with several consecutive JSON objects (lines 1–54) that are not wrapped in a single container (such as an array) or separated using a valid format (e.g., NDJSON). This results in an invalid overall JSON file structure.Suggested Diff:
-{ "timestamp": "2023-10-10 12:00:00", ... } -{ "timestamp": "2023-10-10 12:00:01", ... } -... -{ "timestamp": "2023-10-10 12:00:04", ... } +... +N~ { "timestamp": "2023-10-10 12:00:04", ... } +N+1~]Likely invalid or redundant comment.
🧰 Tools
🪛 Biome (1.9.4)
[error] 7-15: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 15-36: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 36-43: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
[error] 43-53: End of file expected
Use an array for a sequence of values:
[1, 2](parse)
| from bitcoin import * | ||
|
|
||
| # BlockCypher API Token | ||
| api_token = "8bd4fa2488614e509a677103b88b95fc" |
There was a problem hiding this comment.
Critical: Remove hardcoded sensitive information.
The API token and private key should not be hardcoded in the source code. This poses a significant security risk as these credentials could be exposed if the code is shared or committed to version control.
Consider using environment variables or a secure configuration management system:
-api_token = "8bd4fa2488614e509a677103b88b95fc"
+api_token = os.getenv("BLOCKCYPHER_API_TOKEN")
-private_key = "KzjKQ3uFj5wXHLM1e8w9q3N8HKknwA5ev9uNHRkZFGz9xH4D2M9"
+private_key = os.getenv("BITCOIN_PRIVATE_KEY")Add this import at the top of the file:
import osAlso applies to: 9-10
| @@ -0,0 +1,92 @@ | |||
| import time | |||
| import json | |||
| from bitcoin import * | |||
There was a problem hiding this comment.
🛠️ Refactor suggestion
Replace wildcard import with explicit imports.
Using wildcard imports (from bitcoin import *) can lead to namespace pollution and make it unclear which symbols are being used.
-from bitcoin import *
+from bitcoin import sign_transaction, broadcast_transaction # Import only what you need📝 Committable suggestion
‼️ IMPORTANT
Carefully review the code before committing. Ensure that it accurately replaces the highlighted code, contains no missing lines, and has no issues with indentation. Thoroughly test & benchmark the code to ensure it meets the requirements.
| from bitcoin import * | |
| from bitcoin import sign_transaction, broadcast_transaction # Import only what you need |
🧰 Tools
🪛 Ruff (0.8.2)
3-3: from bitcoin import * used; unable to detect undefined names
(F403)
| def sign_transaction(): | ||
| """Sign the transaction and log the process.""" | ||
| log_action("Start Signing Transaction", {"sender": sender_address, "recipient": recipient_address}) | ||
|
|
||
| # Create a mock transaction | ||
| tx = { | ||
| "inputs": [{"address": sender_address, "value": "50 BTC"}], # Mock input | ||
| "outputs": [{"address": recipient_address, "value": amount_btc}], | ||
| "metadata": {"message": message} | ||
| } | ||
| log_action("Transaction Created", tx) | ||
|
|
||
| # Simulate signing the transaction | ||
| signed_tx = f"0200000001abcdef...{private_key[:6]}...signaturedata...000000000000" | ||
| log_action("Transaction Signed", {"signed_transaction": signed_tx}) | ||
|
|
||
| return signed_tx, tx |
There was a problem hiding this comment.
Add error handling and input validation.
The sign_transaction function lacks error handling for Bitcoin operations and input validation for addresses and amounts.
Consider adding try-except blocks and validation:
def sign_transaction():
"""Sign the transaction and log the process."""
+ # Validate inputs
+ if not is_valid_bitcoin_address(sender_address) or not is_valid_bitcoin_address(recipient_address):
+ raise ValueError("Invalid Bitcoin address")
+ if amount_btc <= 0:
+ raise ValueError("Amount must be positive")
+
log_action("Start Signing Transaction", {"sender": sender_address, "recipient": recipient_address})
- # Create a mock transaction
- tx = {
- "inputs": [{"address": sender_address, "value": "50 BTC"}], # Mock input
- "outputs": [{"address": recipient_address, "value": amount_btc}],
- "metadata": {"message": message}
- }
- log_action("Transaction Created", tx)
-
- # Simulate signing the transaction
- signed_tx = f"0200000001abcdef...{private_key[:6]}...signaturedata...000000000000"
- log_action("Transaction Signed", {"signed_transaction": signed_tx})
+ try:
+ # Create a mock transaction
+ tx = {
+ "inputs": [{"address": sender_address, "value": "50 BTC"}],
+ "outputs": [{"address": recipient_address, "value": amount_btc}],
+ "metadata": {"message": message}
+ }
+ log_action("Transaction Created", tx)
+
+ # Simulate signing the transaction
+ signed_tx = f"0200000001abcdef...{private_key[:6]}...signaturedata...000000000000"
+ log_action("Transaction Signed", {"signed_transaction": signed_tx})
+ except Exception as e:
+ log_action("Transaction Signing Failed", {"error": str(e)})
+ raise📝 Committable suggestion
‼️ IMPORTANT
Carefully review the code before committing. Ensure that it accurately replaces the highlighted code, contains no missing lines, and has no issues with indentation. Thoroughly test & benchmark the code to ensure it meets the requirements.
| def sign_transaction(): | |
| """Sign the transaction and log the process.""" | |
| log_action("Start Signing Transaction", {"sender": sender_address, "recipient": recipient_address}) | |
| # Create a mock transaction | |
| tx = { | |
| "inputs": [{"address": sender_address, "value": "50 BTC"}], # Mock input | |
| "outputs": [{"address": recipient_address, "value": amount_btc}], | |
| "metadata": {"message": message} | |
| } | |
| log_action("Transaction Created", tx) | |
| # Simulate signing the transaction | |
| signed_tx = f"0200000001abcdef...{private_key[:6]}...signaturedata...000000000000" | |
| log_action("Transaction Signed", {"signed_transaction": signed_tx}) | |
| return signed_tx, tx | |
| def sign_transaction(): | |
| """Sign the transaction and log the process.""" | |
| # Validate inputs | |
| if not is_valid_bitcoin_address(sender_address) or not is_valid_bitcoin_address(recipient_address): | |
| raise ValueError("Invalid Bitcoin address") | |
| if amount_btc <= 0: | |
| raise ValueError("Amount must be positive") | |
| log_action("Start Signing Transaction", {"sender": sender_address, "recipient": recipient_address}) | |
| try: | |
| # Create a mock transaction | |
| tx = { | |
| "inputs": [{"address": sender_address, "value": "50 BTC"}], | |
| "outputs": [{"address": recipient_address, "value": amount_btc}], | |
| "metadata": {"message": message} | |
| } | |
| log_action("Transaction Created", tx) | |
| # Simulate signing the transaction | |
| signed_tx = f"0200000001abcdef...{private_key[:6]}...signaturedata...000000000000" | |
| log_action("Transaction Signed", {"signed_transaction": signed_tx}) | |
| except Exception as e: | |
| log_action("Transaction Signing Failed", {"error": str(e)}) | |
| raise | |
| return signed_tx, tx |
| CONSTRUCTOR_ARGS="" | ||
|
|
||
| # Deploy the contract | ||
| cargo contract instantiate --code $CONTRACT_WASM_PATH --suri $ACCOUNT --constructor new --args $CONSTRUCTOR_ARGS |
There was a problem hiding this comment.
Fix potential shell injection vulnerabilities.
Variable expansions should be quoted to prevent word splitting and glob expansion.
-cargo contract instantiate --code $CONTRACT_WASM_PATH --suri $ACCOUNT --constructor new --args $CONSTRUCTOR_ARGS
+cargo contract instantiate --code "$CONTRACT_WASM_PATH" --suri "$ACCOUNT" --constructor new --args "$CONSTRUCTOR_ARGS"📝 Committable suggestion
‼️ IMPORTANT
Carefully review the code before committing. Ensure that it accurately replaces the highlighted code, contains no missing lines, and has no issues with indentation. Thoroughly test & benchmark the code to ensure it meets the requirements.
| cargo contract instantiate --code $CONTRACT_WASM_PATH --suri $ACCOUNT --constructor new --args $CONSTRUCTOR_ARGS | |
| cargo contract instantiate --code "$CONTRACT_WASM_PATH" --suri "$ACCOUNT" --constructor new --args "$CONSTRUCTOR_ARGS" |
Add error handling and variable validation.
The script lacks error handling and variable validation, which could lead to silent failures or unexpected behavior.
Consider adding these safety measures:
# Deploy the contract
+# Validate variables
+if [ -z "$CONTRACT_WASM_PATH" ] || [ -z "$ACCOUNT" ]; then
+ echo "Error: Required variables are not set"
+ exit 1
+fi
+
+# Check if contract file exists
+if [ ! -f "$CONTRACT_WASM_PATH" ]; then
+ echo "Error: Contract file not found: $CONTRACT_WASM_PATH"
+ exit 1
+fi
+
+# Deploy with error handling
+set -e # Exit on error
cargo contract instantiate --code "$CONTRACT_WASM_PATH" --suri "$ACCOUNT" --constructor new --args "$CONSTRUCTOR_ARGS"📝 Committable suggestion
‼️ IMPORTANT
Carefully review the code before committing. Ensure that it accurately replaces the highlighted code, contains no missing lines, and has no issues with indentation. Thoroughly test & benchmark the code to ensure it meets the requirements.
| cargo contract instantiate --code $CONTRACT_WASM_PATH --suri $ACCOUNT --constructor new --args $CONSTRUCTOR_ARGS | |
| # Deploy the contract | |
| # Validate variables | |
| if [ -z "$CONTRACT_WASM_PATH" ] || [ -z "$ACCOUNT" ]; then | |
| echo "Error: Required variables are not set" | |
| exit 1 | |
| fi | |
| # Check if contract file exists | |
| if [ ! -f "$CONTRACT_WASM_PATH" ]; then | |
| echo "Error: Contract file not found: $CONTRACT_WASM_PATH" | |
| exit 1 | |
| fi | |
| # Deploy with error handling | |
| set -e # Exit on error | |
| cargo contract instantiate --code "$CONTRACT_WASM_PATH" --suri "$ACCOUNT" --constructor new --args "$CONSTRUCTOR_ARGS" |
|
|
||
| #!/bin/bash |
There was a problem hiding this comment.
🛠️ Refactor suggestion
Shebang Position Issue: Remove Leading Blank Line.
The shebang (#!/bin/bash) must be the very first line in the file. Please remove the extra blank line at the top so that the interpreter is correctly recognized.
- 📝 Committable suggestion
‼️ IMPORTANT
Carefully review the code before committing. Ensure that it accurately replaces the highlighted code, contains no missing lines, and has no issues with indentation. Thoroughly test & benchmark the code to ensure it meets the requirements.
| #!/bin/bash | |
| #!/bin/bash |
🧰 Tools
🪛 Shellcheck (0.10.0)
[error] 2-2: The shebang must be on the first line. Delete blanks and move comments.
(SC1128)
| === Full Log Data === | ||
| [ | ||
| { | ||
| "timestamp": "2023-10-10 12:00:00", | ||
| "action": "Start Process", | ||
| "details": { | ||
| "description": "Sign and send transaction to Gavin" | ||
| } | ||
| }, | ||
| { | ||
| "timestamp": "2023-10-10 12:00:01", | ||
| "action": "Start Signing Transaction", | ||
| "details": { | ||
| "sender": "1A1zP1eP5QGefi2DMPTfTL5SLmv7DivfNa", | ||
| "recipient": "GavinAndresenBitcoinAddress" | ||
| } | ||
| }, | ||
| { | ||
| "timestamp": "2023-10-10 12:00:02", | ||
| "action": "Transaction Created", | ||
| "details": { | ||
| "inputs": [ | ||
| { | ||
| "address": "1A1zP1eP5QGefi2DMPTfTL5SLmv7DivfNa", | ||
| "value": "50 BTC" | ||
| } | ||
| ], | ||
| "outputs": [ | ||
| { | ||
| "address": "GavinAndresenBitcoinAddress", | ||
| "value": 0.27 | ||
| } | ||
| ], | ||
| "metadata": { | ||
| "message": "Any updates about the QuadrigaCX victims and Michael Patryn?" | ||
| } | ||
| } | ||
| }, | ||
| { | ||
| "timestamp": "2023-10-10 12:00:03", | ||
| "action": "Transaction Signed", | ||
| "details": { | ||
| "signed_transaction": "0200000001abcdef...KzjKQ3...signaturedata...000000000000" | ||
| } | ||
| }, | ||
| { | ||
| "timestamp": "2023-10-10 12:00:04", | ||
| "action": "Broadcast Transaction", | ||
| "details": { | ||
| "signed_transaction": "0200000001abcdef...KzjKQ3...signaturedata...000000000000", | ||
| "metadata": { | ||
| "message": "Any updates about the QuadrigaCX victims and Michael Patryn?" | ||
| } | ||
| } | ||
| }, | ||
| { | ||
| "timestamp": "2023-10-10 12:00:05", | ||
| "action": "Start Monitoring for Response", | ||
| "details": { | ||
| "recipient": "GavinAndresenBitcoinAddress" | ||
| } | ||
| }, | ||
| { | ||
| "timestamp": "2023-10-10 12:00:11", | ||
| "action": "Response Received", | ||
| "details": { | ||
| "message": "Got it. I'll look into it. – Gavin", | ||
| "signature": "3045022100a3c1b...signaturedata...d47" | ||
| } | ||
| } | ||
| ] |
There was a problem hiding this comment.
🛠️ Refactor suggestion
Valid Consolidated Log Data Found.
The JSON array from lines 83–153 is well-formed and represents a consolidated log of all events. To achieve a consistent and valid JSON file, consider removing the preceding invalid sections and using only this consolidated array for logging.
Overall Recommendation: Consolidate all JSON log entries into a single JSON array and remove any extraneous plain-text segments to ensure the file conforms to valid JSON standards.
🧰 Tools
🪛 Biome (1.9.4)
[error] 83-83: unexpected character =
(parse)
[error] 83-83: unexpected character =
(parse)
[error] 83-83: unexpected character =
(parse)
[error] 83-83: String values must be double quoted.
(parse)
[error] 83-83: String values must be double quoted.
(parse)
[error] 83-83: String values must be double quoted.
(parse)
[error] 83-84: unexpected character =
(parse)
[error] 84-84: unexpected character =
(parse)
[error] 84-85: unexpected character =
(parse)
[error] 85-153: End of file expected
Use an array for a sequence of values: [1, 2]
(parse)
Summary by CodeRabbit
New Features
Bug Fixes