Illumos #1644, #1645, #1646, #1647, #1708 #2

mmatuska · 2012-07-11T21:23:44Z

1644 add ZFS "clones" property
1645 add ZFS "written" and "written@..." properties
1646 "zfs send" should estimate size of stream
1647 "zfs destroy" should determine space reclaimed by destroying multiple snapshots
1708 adjust size of zpool history data
Reviewed by: Richard Lowe richlowe@richlowe.net
Reviewed by: George Wilson gwilson@zfsmail.com
Reviewed by: Albert Lee trisk@opensolaris.org
Approved by: Garrett D'Amore garret@nexenta.com

References:
https://www.illumos.org/issues/1644
https://www.illumos.org/issues/1645
https://www.illumos.org/issues/1646
https://www.illumos.org/issues/1647
https://www.illumos.org/issues/1708

Ported by: Martin Matuska martin@matuska.org

I have also fixed the 2 issues you reported.
What about moving reguid and the other IOCTL's to the end? This way you keep the backwards compatibility with old ioctls (but may still break with delsnaps, but there is no real choice).

…fs#1708 1644 add ZFS "clones" property 1645 add ZFS "written" and "written@..." properties 1646 "zfs send" should estimate size of stream 1647 "zfs destroy" should determine space reclaimed by destroying multiple snapshots 1708 adjust size of zpool history data Reviewed by: Richard Lowe <richlowe@richlowe.net> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Albert Lee <trisk@opensolaris.org> Approved by: Garrett D'Amore <garret@nexenta.com> References: https://www.illumos.org/issues/1644 https://www.illumos.org/issues/1645 https://www.illumos.org/issues/1646 https://www.illumos.org/issues/1647 https://www.illumos.org/issues/1708 Ported by: Martin Matuska <martin@matuska.org>

ZoL commit 1421c89 unintentionally changed the disk format in a forward- compatible, but not backward compatible way. This was accomplished by adding an entry to zbookmark_t, which is included in a couple of on-disk structures. That lead to the creation of pools with incorrect dsl_scan_phys_t objects that could only be imported by versions of ZoL containing that commit. Such pools cannot be imported by other versions of ZFS or past versions of ZoL. The additional field has been removed by the previous commit. However, affected pools must be imported and scrubbed using a version of ZoL with this commit applied. This will return the pools to a state in which they may be imported by other implementations. The 'zpool import' or 'zpool status' command can be used to determine if a pool is impacted. A message similar to one of the following means your pool must be scrubbed to restore compatibility. $ zpool import pool: zol-0.6.2-173 id: 1165955789558693437 state: ONLINE status: Errata #1 detected. action: The pool can be imported using its name or numeric identifier, however there is a compatibility issue which should be corrected by running 'zpool scrub' see: http://zfsonlinux.org/msg/ZFS-8000-ER config: ... $ zpool status pool: zol-0.6.2-173 state: ONLINE scan: pool compatibility issue detected. see: openzfs#2094 action: To correct the issue run 'zpool scrub'. config: ... If there was an async destroy in progress 'zpool import' will prevent the pool from being imported. Further advice on how to proceed will be provided by the error message as follows. $ zpool import pool: zol-0.6.2-173 id: 1165955789558693437 state: ONLINE status: Errata #2 detected. action: The pool can not be imported with this version of ZFS due to an active asynchronous destroy. Revert to an earlier version and allow the destroy to complete before updating. see: http://zfsonlinux.org/msg/ZFS-8000-ER config: ... Pools affected by the damaged dsl_scan_phys_t can be detected prior to an upgrade by running the following command as root: zdb -dddd poolname 1 | grep -P '^\t\tscan = ' | sed -e 's;scan = ;;' | wc -w Note that `poolname` must be replaced with the name of the pool you wish to check. A value of 25 indicates the dsl_scan_phys_t has been damaged. A value of 24 indicates that the dsl_scan_phys_t is normal. A value of 0 indicates that there has never been a scrub run on the pool. The regression caused by the change to zbookmark_t never made it into a tagged release, Gentoo backports, Ubuntu, Debian, Fedora, or EPEL stable respositorys. Only those using the HEAD version directly from Github after the 0.6.2 but before the 0.6.3 tag are affected. This patch does have one limitation that should be mentioned. It will not detect errata #2 on a pool unless errata #1 is also present. It expected this will not be a significant problem because pools impacted by errata #2 have a high probably of being impacted by errata #1. End users can ensure they do no hit this unlikely case by waiting for all asynchronous destroy operations to complete before updating ZoL. The presence of any background destroys on any imported pools can be checked by running `zpool get freeing` as root. This will display a non-zero value for any pool with an active asynchronous destroy. Lastly, it is expected that no user data has been lost as a result of this erratum. Original-patch-by: Tim Chase <tim@chase2k.com> Reworked-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue openzfs#2094

ZoL commit 1421c89 unintentionally changed the disk format in a forward- compatible, but not backward compatible way. This was accomplished by adding an entry to zbookmark_t, which is included in a couple of on-disk structures. That lead to the creation of pools with incorrect dsl_scan_phys_t objects that could only be imported by versions of ZoL containing that commit. Such pools cannot be imported by other versions of ZFS or past versions of ZoL. The additional field has been removed by the previous commit. However, affected pools must be imported and scrubbed using a version of ZoL with this commit applied. This will return the pools to a state in which they may be imported by other implementations. The 'zpool import' or 'zpool status' command can be used to determine if a pool is impacted. A message similar to one of the following means your pool must be scrubbed to restore compatibility. $ zpool import pool: zol-0.6.2-173 id: 1165955789558693437 state: ONLINE status: Errata #1 detected. action: The pool can be imported using its name or numeric identifier, however there is a compatibility issue which should be corrected by running 'zpool scrub' see: http://zfsonlinux.org/msg/ZFS-8000-ER config: ... $ zpool status pool: zol-0.6.2-173 state: ONLINE scan: pool compatibility issue detected. see: openzfs#2094 action: To correct the issue run 'zpool scrub'. config: ... If there was an async destroy in progress 'zpool import' will prevent the pool from being imported. Further advice on how to proceed will be provided by the error message as follows. $ zpool import pool: zol-0.6.2-173 id: 1165955789558693437 state: ONLINE status: Errata #2 detected. action: The pool can not be imported with this version of ZFS due to an active asynchronous destroy. Revert to an earlier version and allow the destroy to complete before updating. see: http://zfsonlinux.org/msg/ZFS-8000-ER config: ... Pools affected by the damaged dsl_scan_phys_t can be detected prior to an upgrade by running the following command as root: zdb -dddd poolname 1 | grep -P '^\t\tscan = ' | sed -e 's;scan = ;;' | wc -w Note that `poolname` must be replaced with the name of the pool you wish to check. A value of 25 indicates the dsl_scan_phys_t has been damaged. A value of 24 indicates that the dsl_scan_phys_t is normal. A value of 0 indicates that there has never been a scrub run on the pool. The regression caused by the change to zbookmark_t never made it into a tagged release, Gentoo backports, Ubuntu, Debian, Fedora, or EPEL stable respositorys. Only those using the HEAD version directly from Github after the 0.6.2 but before the 0.6.3 tag are affected. This patch does have one limitation that should be mentioned. It will not detect errata #2 on a pool unless errata #1 is also present. It expected this will not be a significant problem because pools impacted by errata #2 have a high probably of being impacted by errata #1. End users can ensure they do no hit this unlikely case by waiting for all asynchronous destroy operations to complete before updating ZoL. The presence of any background destroys on any imported pools can be checked by running `zpool get freeing` as root. This will display a non-zero value for any pool with an active asynchronous destroy. Lastly, it is expected that no user data has been lost as a result of this erratum. Original-patch-by: Tim Chase <tim@chase2k.com> Reworked-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue openzfs#2094

Tagging each zevent with a unique monotonically increasing EID (Event IDentifier) provides the required infrastructure for a user space daemon to reliably process zevents. By writing the EID to persistent storage the daemon can safely resume where it left off in the event stream when it's restarted. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Issue #2

The ZFS_IOC_EVENTS_SEEK ioctl was added to allow user space callers to seek around the zevent file descriptor by EID. When a specific EID is passed and it exists the cursor will be positioned there. If the EID is no longer cached by the kernel ENOENT is returned. The caller may also pass ZEVENT_SEEK_START or ZEVENT_SEEK_END to seek to those respective locations. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Issue #2

Due to the very poorly chosen argument name 'cleanup_fd' it was completely unclear that this file descriptor is used to track the current cursor location. When the file descriptor is created by opening ZFS_DEV a private cursor is created in the kernel for the returned file descriptor. Subsequent calls to zpool_events_next() and zpool_events_seek() then require the file descriptor as an argument to reposition the cursor. When the file descriptor is closed the kernel state tracking the cursor is destroyed. This patch contains no functional change, it just changes a few variable names and clarifies the documentation. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Issue #2

Add macro definitions to AM_CPPFLAGS to propagate makefile installation directory variables for libexecdir, runstatedir, sbindir, and sysconfdir. https://www.gnu.org/software/autoconf/manual/autoconf-2.69/html_node/Installation-Directory-Variables.html A corollary is that you should not use these variables except in makefiles. For instance, instead of trying to evaluate datadir in configure and hard-coding it in makefiles using e.g., 'AC_DEFINE_UNQUOTED([DATADIR], ["$datadir"], [Data directory.])', you should add -DDATADIR='$(datadir)' to your makefile's definition of CPPFLAGS (AM_CPPFLAGS if you are also using Automake). The runstatedir directory is for "installing data files which the programs modify while they run, that pertain to one specific machine, and which need not persist longer than the execution of the program". https://www.gnu.org/prep/standards/html_node/Directory-Variables.html It will be defined by autoconf 2.70 or later, and default to "$(localstatedir)/run". http://git.savannah.gnu.org/gitweb/?p=autoconf.git;a=commit;h=a197431414088a417b407b9b20583b2e8f7363bd Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #2

zpool_events_next() can be called in blocking mode by specifying a non-zero value for the "block" parameter. However, the design of the ZFS Event Daemon (zed) requires additional functionality from zpool_events_next(). Instead of adding additional arguments to the function, it makes more sense to use flags that can be bitwise-or'd together. This commit replaces the zpool_events_next() int "block" parameter with an unsigned bitwise "flags" parameter. It also defines ZEVENT_NONE to specify the default behavior. Since non-blocking mode can be specified with the existing ZEVENT_NONBLOCK flag, the default behavior becomes blocking mode. This, in effect, inverts the previous use of the "block" parameter. Existing callers of zpool_events_next() have been modified to check for the ZEVENT_NONBLOCK flag. Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #2

zed monitors ZFS events. When a zevent is posted, zed will run any scripts that have been enabled for the corresponding zevent class. Multiple scripts may be invoked for a given zevent. The zevent nvpairs are passed to the scripts as environment variables. Events are processed synchronously by the single thread, and there is no maximum timeout for script execution. Consequently, a misbehaving script can delay (or forever block) the processing of subsequent zevents. Plans are to address this in future commits. Initial scripts have been developed to log events to syslog and send email in response to checksum/data/io errors and resilver.finish/scrub.finish events. By default, email will only be sent if the ZED_EMAIL variable is configured in zed.rc (which is serving as a config file of sorts until a proper configuration file is implemented). Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #2

This commit adds a systemd unit file for zed.service and integrates it into the zfs.target from commit 881f45c. Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue openzfs#2108 Issue #2

Several of the zfs utilities allow you to pass a vdev's guid rather than the device name. However, the utilities are not consistent in how they parse that guid. For example, 'zinject' expects the guid to be passed as a hex value while 'zpool replace' wants it as a decimal. The user is forced to just know what format to use. This patch improve things by making the parsing more tolerant. When strtol(3) is called using 0 for the base, rather than say 10 or 16, it will then accept hex, decimal, or octal input based on the prefix. From the man page. If base is zero or 16, the string may then include a "0x" prefix, and the number will be read in base 16; otherwise, a zero base is taken as 10 (decimal) unless the next character is '0', in which case it is taken as 8 (octal). NOTE: There may be additional conversions not caught be this patch. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Issue #2

This functionality has always been missing. But until now there were no zevents which included an array of strings so it wasn't missed. However, that's now changed so to ensure this information is output correctly by 'zpool events -v' the DATA_TYPE_STRING_ARRAY has been implemented. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Issue #2

When a vdev starts getting I/O or checksum errors it is now possible to automatically rebuild to a hot spare device. To cleanly support this functionality in a shell script some additional information was added to all zevent ereports which include a vdev. This covers both io and checksum zevents but may be used but other scripts. In the Illumos FMA solution the same information is required but it is retrieved through the libzfs library interface. Specifically the following members were added: vdev_spare_paths - List of vdev paths for all hot spares. vdev_spare_guids - List of vdev guids for all hot spares. vdev_read_errors - Read errors for the problematic vdev vdev_write_errors - Write errors for the problematic vdev vdev_cksum_errors - Checksum errors for the problematic vdev. By default the required hot spare scripts are installed but this functionality is disabled. To enable hot sparing uncomment the ZED_SPARE_ON_IO_ERRORS and ZED_SPARE_ON_CHECKSUM_ERRORS in the /etc/zfs/zed.d/zed.rc configuration file. These scripts do no add support for the autoexpand property. At a minimum this requires adding a new udev rule to detect when a new device is added to the system. It also requires that the autoexpand policy be ported from Illumos, see: https://github.com/illumos/illumos-gate/blob/master/usr/src/cmd/syseventd/modules/zfs_mod/zfs_mod.c Support for detecting the correct name of a vdev when it's not a whole disk was added by Turbo Fredriksson. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Signed-off-by: Turbo Fredriksson <turbo@bayour.com> Issue #2

zed supports a '-M' cmdline opt to lock all pages in memory via mlockall(). The _POSIX_MEMLOCK define is checked to determine whether this function is supported. The current test assumes mlockall() is supported if _POSIX_MEMLOCK is non-zero. However, this test is insufficient according to mlock(2) and sysconf(3). If _POSIX_MEMLOCK is -1, mlockall() is not supported; but if _POSIX_MEMLOCK is 0, availability must be checked at runtime. This commit adds an autoconf check for mlockall() to user.m4. The zed code block for mlockall() is now guarded with a test for HAVE_MLOCKALL. If defined, mlockall() will be called and its runtime availability checked via its return value. Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #2

zed monitors ZFS events. When a zevent is posted, zed will run any scripts that have been enabled for the corresponding zevent class. Multiple scripts may be invoked for a given zevent. The zevent nvpairs are passed to the scripts as environment variables. Refer to the zed(8) manpage for details. Events are processed synchronously by the single thread, and there is no maximum timeout for script execution. Consequently, a misbehaving script can delay (or forever block) the processing of subsequent zevents. Plans are to address this in future commits. An EID (Event IDentifier) has been added to each event to uniquely identify it throughout the lifetime of the loaded ZFS kernel module; it is a monotonically increasing integer that resets to 1 each time the module is loaded. Initial scripts have been developed to log zevents to syslog, automatically rebuild to a hot spare device, and send email in response to checksum / data / io / resilver.finish / scrub.finish zevents. To enable email notifications, configure ZED_EMAIL in zed.rc (which is serving as a config file of sorts until a proper configuration file is implemented). To enable hot sparing, uncomment ZED_SPARE_ON_IO_ERRORS and ZED_SPARE_ON_CHECKSUM_ERRORS in zed.rc; note that the autoexpand property is not yet supported. zed is a work-in-progress. Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #2

Leaks reported by using AddressSanitizer, GCC 6.1.0 Direct leak of 4097 byte(s) in 1 object(s) allocated from: #1 0x414f73 in process_options cmd/ztest/ztest.c:721 Direct leak of 5440 byte(s) in 17 object(s) allocated from: #1 0x41bfd5 in umem_alloc ../../lib/libspl/include/umem.h:88 #2 0x41bfd5 in ztest_zap_parallel cmd/ztest/ztest.c:4659 #3 0x4163a8 in ztest_execute cmd/ztest/ztest.c:5907 Signed-off-by: Gvozden Neskovic <neskovic@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes openzfs#4896

- Fix autoreplace behaviour on statechange-led.sh script. ZED sends the following events on an auto-replace: 1. statechange: Disk goes UNAVAIL->ONLINE 2. statechange: Disk goes ONLINE->UNAVAIL 3. vdev_attach: Disk goes ONLINE Events 1-2 happen when ZED first attempts to do an auto-online. When that fails, ZED then tries an auto-replace, generating the vdev_attach event in #3. In the previous code, statechange-led was only looking at the UNAVAIL->ONLINE transition to turn off the LED. It ignored the #2 ONLINE->UNAVAIL transition, assuming it was just the "old" VDEV going offline. This is problematic, as a drive can go from ONLINE->UNAVAIL when it's malfunctioning, and we don't want to ignore that. This new patch correctly turns on the fault LED every time a drive becomes UNAVAIL. It also monitors vdev_attach events to trigger turning off the LED when an auto-replaced disk comes online. - Remove unnecessary libdevmapper warning with --with-config=kernel This fixes an unnecessary libdevmapper warning when building --with-config=kernel. Kernel code does not use libdevmapper, so the warning is not needed. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tony Hutter <hutter2@llnl.gov> Closes openzfs#2375 Closes openzfs#5312 Closes openzfs#5331

The bug time sequence: 1. thread #1, `zfs_write` assign a txg "n". 2. In a same process, thread #2, mmap page fault (which means the `mm_sem` is hold) occurred, `zfs_dirty_inode` open a txg failed, and wait previous txg "n" completed. 3. thread #1 call `uiomove` to write, however page fault is occurred in `uiomove`, which means it need `mm_sem`, but `mm_sem` is hold by thread #2, so it stuck and can't complete, then txg "n" will not complete. So thread #1 and thread #2 are deadlocked. Reviewed-by: Chunwei Chen <tuxoko@gmail.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Signed-off-by: Grady Wong <grady.w@xtaotech.com> Closes openzfs#7939

1) Removed the first-fit allocator. 2) Moved the autotrim metaslab scheduling logic into vdev_auto_trim. 2a) As a consequence of #2, metaslab_trimset_t was rendered superfluous. New trimsets are simple range_tree_t's. 3) Made ms_trimming_ts remove extents it is working on from ms_tree and then add them back in. 3a) As a consequence of #3, undone all the direct changes to the allocators and removed metaslab_check_trim_conflict and range_tree_find_gap. Porting Notes: * Removed WITH_*_ALLOCATOR macros and aligned remaining allocations with OpenZFS. Unused wariables warnings resolved with the gcc __attribute__ ((unused__ keyword. * Added missing calls for ms_condensing_cv. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Requires-builders: none

Booting debug kernel found an inconsistent lock dependency between dataset's ds_lock and its directory's dd_lock. [ 32.215336] ====================================================== [ 32.221859] WARNING: possible circular locking dependency detected [ 32.221861] 4.14.90+ openzfs#8 Tainted: G O [ 32.221862] ------------------------------------------------------ [ 32.221863] dynamic_kernel_/4667 is trying to acquire lock: [ 32.221864] (&ds->ds_lock){+.+.}, at: [<ffffffffc10a4bde>] dsl_dataset_check_quota+0x9e/0x8a0 [zfs] [ 32.221941] but task is already holding lock: [ 32.221941] (&dd->dd_lock){+.+.}, at: [<ffffffffc10cd8e9>] dsl_dir_tempreserve_space+0x3b9/0x1290 [zfs] [ 32.221983] which lock already depends on the new lock. [ 32.221983] the existing dependency chain (in reverse order) is: [ 32.221984] -> #1 (&dd->dd_lock){+.+.}: [ 32.221992] __mutex_lock+0xef/0x14c0 [ 32.222049] dsl_dir_namelen+0xd4/0x2d0 [zfs] [ 32.222093] dsl_dataset_namelen+0x2f1/0x430 [zfs] [ 32.222142] verify_dataset_name_len+0xd/0x40 [zfs] [ 32.222184] dmu_objset_find_dp_impl+0x5f5/0xef0 [zfs] [ 32.222226] dmu_objset_find_dp_cb+0x40/0x60 [zfs] [ 32.222235] taskq_thread+0x969/0x1460 [spl] [ 32.222238] kthread+0x2fb/0x400 [ 32.222241] ret_from_fork+0x3a/0x50 [ 32.222241] -> #0 (&ds->ds_lock){+.+.}: [ 32.222246] lock_acquire+0x14f/0x390 [ 32.222248] __mutex_lock+0xef/0x14c0 [ 32.222291] dsl_dataset_check_quota+0x9e/0x8a0 [zfs] [ 32.222355] dsl_dir_tempreserve_space+0x5d2/0x1290 [zfs] [ 32.222392] dmu_tx_assign+0xa61/0xdb0 [zfs] [ 32.222436] zfs_create+0x4e6/0x11d0 [zfs] [ 32.222481] zpl_create+0x194/0x340 [zfs] [ 32.222484] lookup_open+0xa86/0x16f0 [ 32.222486] path_openat+0xe56/0x2490 [ 32.222488] do_filp_open+0x17f/0x260 [ 32.222490] do_sys_open+0x195/0x310 [ 32.222491] SyS_open+0xbf/0xf0 [ 32.222494] do_syscall_64+0x191/0x4f0 [ 32.222496] entry_SYSCALL_64_after_hwframe+0x42/0xb7 [ 32.222497] other info that might help us debug this: [ 32.222497] Possible unsafe locking scenario: [ 32.222498] CPU0 CPU1 [ 32.222498] ---- ---- [ 32.222499] lock(&dd->dd_lock); [ 32.222500] lock(&ds->ds_lock); [ 32.222502] lock(&dd->dd_lock); [ 32.222503] lock(&ds->ds_lock); [ 32.222504] *** DEADLOCK *** [ 32.222505] 3 locks held by dynamic_kernel_/4667: [ 32.222506] #0: (sb_writers#9){.+.+}, at: [<ffffffffaf68933c>] mnt_want_write+0x3c/0xa0 [ 32.222511] #1: (&type->i_mutex_dir_key#8){++++}, at: [<ffffffffaf652cde>] path_openat+0xe2e/0x2490 [ 32.222515] #2: (&dd->dd_lock){+.+.}, at: [<ffffffffc10cd8e9>] dsl_dir_tempreserve_space+0x3b9/0x1290 [zfs] The issue is caused by dsl_dataset_namelen() holding ds_lock, followed by acquiring dd_lock on ds->ds_dir in dsl_dir_namelen(). However, ds->ds_dir should not be protected by ds_lock, so releasing it before call to dsl_dir_namelen() prevents the lockdep issue Reviewed-by: Alek Pinchuk <apinchuk@datto.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Chris Dunlop <chris@onthe.net.au> Signed-off-by: Michael Zhivich <mzhivich@akamai.com> Closes openzfs#8413

The issue is caused by an incorrect usage of the sizeof() operator in vdev_obsolete_sm_object(): on 64-bit systems this is not an issue since both "uint64_t" and "uint64_t*" are 8 bytes in size. However on 32-bit systems pointers are 4 bytes long which is not supported by zap_lookup_impl(). Trying to remove a top-level vdev on a 32-bit system will cause the following failure: VERIFY3(0 == vdev_obsolete_sm_object(vd, &obsolete_sm_object)) failed (0 == 22) PANIC at vdev_indirect.c:833:vdev_indirect_sync_obsolete() Showing stack for process 1315 CPU: 6 PID: 1315 Comm: txg_sync Tainted: P OE 4.4.69+ #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-2.fc27 04/01/2014 c1abc6e7 0ae10898 00000286 d4ac3bc0 c14397bc da4cd7d8 d4ac3bf0 d4ac3bd0 d790e7ce d7911cc1 00000523 d4ac3d00 d790e7d7 d7911ce4 da4cd7d8 00000341 da4ce664 da4cd8c0 da33fa6e 49524556 28335946 3d3d2030 65647620 626f5f76 Call Trace: [<>] dump_stack+0x58/0x7c [<>] spl_dumpstack+0x23/0x27 [spl] [<>] spl_panic.cold.0+0x5/0x41 [spl] [<>] ? dbuf_rele+0x3e/0x90 [zfs] [<>] ? zap_lookup_norm+0xbe/0xe0 [zfs] [<>] ? zap_lookup+0x57/0x70 [zfs] [<>] ? vdev_obsolete_sm_object+0x102/0x12b [zfs] [<>] vdev_indirect_sync_obsolete+0x3e1/0x64d [zfs] [<>] ? txg_verify+0x1d/0x160 [zfs] [<>] ? dmu_tx_create_dd+0x80/0xc0 [zfs] [<>] vdev_sync+0xbf/0x550 [zfs] [<>] ? mutex_lock+0x10/0x30 [<>] ? txg_list_remove+0x9f/0x1a0 [zfs] [<>] ? zap_contains+0x4d/0x70 [zfs] [<>] spa_sync+0x9f1/0x1b10 [zfs] ... [<>] ? kthread_stop+0x110/0x110 This commit simply corrects the "integer_size" parameter used to lookup the vdev's ZAP object. Reviewed-by: Giuseppe Di Natale <guss80@gmail.com> Reviewed-by: Igor Kozhukhov <igor@dilos.org> Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: loli10K <ezomori.nozomu@gmail.com> Closes openzfs#8790

After spa_vdev_remove_aux() is called, the config nvlist is no longer valid, as it's been replaced by the new one (with the specified device removed). Therefore any pointers into the nvlist are no longer valid. So we can't save the result of `fnvlist_lookup_string(nv, ZPOOL_CONFIG_PATH)` (in vd_path) across the call to spa_vdev_remove_aux(). Instead, use spa_strdup() to save a copy of the string before calling spa_vdev_remove_aux. Found by AddressSanitizer: ERROR: AddressSanitizer: heap-use-after-free on address ... READ of size 34 at 0x608000a1fcd0 thread T686 #0 0x7fe88b0c166d (/usr/lib/x86_64-linux-gnu/libasan.so.4+0x5166d) #1 0x7fe88a5acd6e in spa_strdup spa_misc.c:1447 #2 0x7fe88a688034 in spa_vdev_remove vdev_removal.c:2259 #3 0x55ffbc7748f8 in ztest_vdev_aux_add_remove ztest.c:3229 #4 0x55ffbc769fba in ztest_execute ztest.c:6714 #5 0x55ffbc779a90 in ztest_thread ztest.c:6761 #6 0x7fe889cbc6da in start_thread openzfs#7 0x7fe8899e588e in __clone 0x608000a1fcd0 is located 48 bytes inside of 88-byte region freed by thread T686 here: #0 0x7fe88b14e7b8 in __interceptor_free #1 0x7fe88ae541c5 in nvlist_free nvpair.c:874 #2 0x7fe88ae543ba in nvpair_free nvpair.c:844 #3 0x7fe88ae57400 in nvlist_remove_nvpair nvpair.c:978 #4 0x7fe88a683c81 in spa_vdev_remove_aux vdev_removal.c:185 #5 0x7fe88a68857c in spa_vdev_remove vdev_removal.c:2221 #6 0x55ffbc7748f8 in ztest_vdev_aux_add_remove ztest.c:3229 openzfs#7 0x55ffbc769fba in ztest_execute ztest.c:6714 openzfs#8 0x55ffbc779a90 in ztest_thread ztest.c:6761 openzfs#9 0x7fe889cbc6da in start_thread Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Ryan Moeller <ryan@ixsystems.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes openzfs#9706

`zpool_do_import()` passes `argv[0]`, (optionally) `argv[1]`, and `pool_specified` to `import_pools()`. If `pool_specified==FALSE`, the `argv[]` arguments are not used. However, these values may be off the end of the `argv[]` array, so loading them could dereference unmapped memory. This error is reported by the asan build: ``` ================================================================= ==6003==ERROR: AddressSanitizer: heap-buffer-overflow READ of size 8 at 0x6030000004a8 thread T0 #0 0x562a078b50eb in zpool_do_import zpool_main.c:3796 #1 0x562a078858c5 in main zpool_main.c:10709 #2 0x7f5115231bf6 in __libc_start_main #3 0x562a07885eb9 in _start 0x6030000004a8 is located 0 bytes to the right of 24-byte region allocated by thread T0 here: #0 0x7f5116ac6b40 in __interceptor_malloc #1 0x562a07885770 in main zpool_main.c:10699 #2 0x7f5115231bf6 in __libc_start_main ``` This commit passes NULL for these arguments if they are off the end of the `argv[]` array. Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Allan Jude <allan@klarasystems.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes openzfs#12339

Under certain loads, the following panic is hit: panic: page fault KDB: stack backtrace: #0 0xffffffff805db025 at kdb_backtrace+0x65 #1 0xffffffff8058e86f at vpanic+0x17f #2 0xffffffff8058e6e3 at panic+0x43 #3 0xffffffff808adc15 at trap_fatal+0x385 #4 0xffffffff808adc6f at trap_pfault+0x4f #5 0xffffffff80886da8 at calltrap+0x8 #6 0xffffffff80669186 at vgonel+0x186 openzfs#7 0xffffffff80669841 at vgone+0x31 openzfs#8 0xffffffff8065806d at vfs_hash_insert+0x26d openzfs#9 0xffffffff81a39069 at sfs_vgetx+0x149 openzfs#10 0xffffffff81a39c54 at zfsctl_snapdir_lookup+0x1e4 openzfs#11 0xffffffff8065a28c at lookup+0x45c openzfs#12 0xffffffff806594b9 at namei+0x259 openzfs#13 0xffffffff80676a33 at kern_statat+0xf3 openzfs#14 0xffffffff8067712f at sys_fstatat+0x2f openzfs#15 0xffffffff808ae50c at amd64_syscall+0x10c openzfs#16 0xffffffff808876bb at fast_syscall_common+0xf8 The page fault occurs because vgonel() will call VOP_CLOSE() for active vnodes. For this reason, define vop_close for zfsctl_ops_snapshot. While here, define vop_open for consistency. After adding the necessary vop, the bug progresses to the following panic: panic: VERIFY3(vrecycle(vp) == 1) failed (0 == 1) cpuid = 17 KDB: stack backtrace: #0 0xffffffff805e29c5 at kdb_backtrace+0x65 #1 0xffffffff8059620f at vpanic+0x17f #2 0xffffffff81a27f4a at spl_panic+0x3a #3 0xffffffff81a3a4d0 at zfsctl_snapshot_inactive+0x40 #4 0xffffffff8066fdee at vinactivef+0xde #5 0xffffffff80670b8a at vgonel+0x1ea #6 0xffffffff806711e1 at vgone+0x31 openzfs#7 0xffffffff8065fa0d at vfs_hash_insert+0x26d openzfs#8 0xffffffff81a39069 at sfs_vgetx+0x149 openzfs#9 0xffffffff81a39c54 at zfsctl_snapdir_lookup+0x1e4 openzfs#10 0xffffffff80661c2c at lookup+0x45c openzfs#11 0xffffffff80660e59 at namei+0x259 openzfs#12 0xffffffff8067e3d3 at kern_statat+0xf3 openzfs#13 0xffffffff8067eacf at sys_fstatat+0x2f openzfs#14 0xffffffff808b5ecc at amd64_syscall+0x10c openzfs#15 0xffffffff8088f07b at fast_syscall_common+0xf8 This is caused by a race condition that can occur when allocating a new vnode and adding that vnode to the vfs hash. If the newly created vnode loses the race when being inserted into the vfs hash, it will not be recycled as its usecount is greater than zero, hitting the above assertion. Fix this by dropping the assertion. FreeBSD-issue: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=252700 Reviewed-by: Andriy Gapon <avg@FreeBSD.org> Reviewed-by: Mateusz Guzik <mjguzik@gmail.com> Reviewed-by: Alek Pinchuk <apinchuk@axcient.com> Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Signed-off-by: Rob Wing <rob.wing@klarasystems.com> Co-authored-by: Rob Wing <rob.wing@klarasystems.com> Submitted-by: Klara, Inc. Sponsored-by: rsync.net Closes openzfs#14501

mmatuska closed this Jul 12, 2012

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Illumos #1644, #1645, #1646, #1647, #1708 #2

Illumos #1644, #1645, #1646, #1647, #1708 #2

mmatuska commented Jul 11, 2012

Illumos #1644, #1645, #1646, #1647, #1708 #2

Illumos #1644, #1645, #1646, #1647, #1708 #2

Conversation

mmatuska commented Jul 11, 2012