Icinga 2 Puppet Module

Overview
Module Description - What the module does and why it is useful
Setup - The basics of getting started with icinga2
- What Icinga 2 affects
Usage - Configuration options and additional functionality
Reference - An under-the-hood peek at what the module is doing and how
Development - Guide for contributing to the module

Overview

Icinga 2 is a widely used open source monitoring software. This Puppet module helps with installing and managing configuration of Icinga 2 on multiple operating systems.

Notices

For Icinga 2 v2.8.0 and higher version v1.3.4 and above is needed and the parameter repositoryd can set to false. See issue #403.

Module Description

This module installs and configures Icinga 2 on your Linux or Windows hosts.

By default it uses packages provided by your distribution's repository or Chocolatey on Windows.

The module can also be configured to use packages.icinga.com as the primary repository, which enables you to install Icinga 2 versions that are newer than the ones provided by your distribution's vendor. All features and objects available in Icinga 2 can be enabled and configured with this module.

Setup

What the Icinga 2 Puppet module supports

Installation of packages
Configuration of features
Configuration of objects (also apply rules)
Service
MySQL / PostgreSQL Database Schema Import
Repository Management
Certification Authority

Dependencies

This module depends on:

puppetlabs/stdlib >= 4.16.0 < 5.0.0
puppetlabs/concat >= 2.1.0 < 5.0.0

Depending on your setup following modules may also be required:

Limitations

This module has been tested on:

Ruby >= 1.9
Debian 7, 8
Ubuntu 14.04, 16.04
CentOS/RHEL 6, 7
- Caution: CentOS 6 comes with Ruby 1.8.7 by default
OracleLinux 7
FreeBSD 10, 11
SLES 12
Windows Server 2012

Other operating systems or versions may work but have not been tested.

It's recommended to enable the future parser when using this module in combination with exported resources.

Usage

Installing Icinga 2

The default class icinga2 installs and configures a basic installation of Icinga 2. The features checker, mainlog and notification are enabled by default.

By default, your distribution's packages are used to install Icinga 2. On Windows systems we use the Chocolatey package manager.

Use the manage_repo parameter to configure the official packages.icinga.com repositories.

class { '::icinga2':
  manage_repo => true,
}

Info: If you are using the Icinga Web 2 Puppet module on the same server, make sure to disable the repository management for one of the modules!

If you want to manage the version of Icinga 2, you have to disable the package management of this module and handle packages in your own Puppet code. The attribute manage_repo is also disabled automattically and you have to manage a repository within icinga in front of the package resource, i.e. for a RedHat system:

yumrepo { 'icinga-stable-release':
  baseurl  => "http://packages.icinga.com/epel/${::operatingsystemmajrelease}/release/",
  descr    => 'ICINGA (stable release for epel)',
  enabled  => 1,
  gpgcheck => 1,
  gpgkey   => 'http://packages.icinga.com/icinga.key',
  before   => Package['icinga2'],
}

package { 'icinga2':
  ensure => latest,
  notify => Class['icinga2'],
}

class { '::icinga2':
  manage_package => false,
}

Note: Be careful with this option: Setting manage_package to false means that this module will not install any package at all, including IDO packages!

Enabling Features

There are two options how you can enable features:

A default set of features is set with the features parameter in the ::icinga2 class:

class { '::icinga2':
  manage_repo => true,
  features    => ['checker', 'mainlog', 'command'],
}

To enable a feature and change its configuration, declare the specified feature class:

class { '::icinga2::feature::graphite':
  host                   => '10.10.0.15',
  port                   => 2003,
  enable_send_thresholds => true,
  enable_send_metadata   => true,
}

Make sure that you enable features either in the ::icinga2 class or by declaring the feature class.

Setting up Icinga IDO

The IDO feature can be enabled either in combination with MySQL or PostgreSQL.

Depending on your database you need to enable the feature icinga2::feature::idomysql or icinga2::feature::idopgsql.

Both features are capable of importing the base schema into the database, however this is disabled by default. Updating the database schema to another version is currently not supported.

The IDO features require a pre-existing database and a user with permissions to create schema and edit data.

MySQL

When using MySQL we recommend the puppetlabs/mysql Puppet module to install the database server, create a database and manage user permissions. Here's an example how you create a MySQL database with the corresponding user with permissions by using the puppetlabs/mysql module:

include ::icinga2
include ::mysql::server

mysql::db { 'icinga2':
  user     => 'icinga2',
  password => 'supersecret',
  host     => '127.0.0.1',
  grant    => ['SELECT', 'INSERT', 'UPDATE', 'DELETE', 'DROP', 'CREATE VIEW', 'CREATE', 'INDEX', 'EXECUTE', 'ALTER'],
}

class{ '::icinga2::feature::idomysql':
  user          => 'icinga2',
  password      => 'supersecret',
  database      => 'icinga2',
  import_schema => true,
  require       => Mysql::Db['icinga2'],
}

PostgreSQL

For PostgreSQL we recommend the puppetlabs/puppetlabs-postgresql module. You can install the server, create databases and manage user permissions with the module. Here's an example on how to use it in combination with Icinga 2:

include ::icinga2
include ::postgresql::server

postgresql::server::db { 'icinga2':
  user     => 'icinga2',
  password => postgresql_password('icinga2', 'supersecret'),
}

class{ '::icinga2::feature::idopgsql':
  user          => 'icinga2',
  password      => 'supersecret',
  database      => 'icinga2',
  import_schema => true,
  require       => Postgresql::Server::Db['icinga2'],
}

Clustering Icinga 2

Icinga 2 can run in three different roles:

in a master zone which is on top of the hierarchy
in a satellite zone which is a child of a satellite or master zone
a standalone client node/zone which works as an agent connected to master and/or satellite zones

To learn more about Icinga 2 Clustering, follow the official docs on distributed monitoring. The following examples show how these roles can be configured using this Puppet module.

Master

A Master zone has no parent and is usually also the place where you enable the IDO and notification features. A master sends configurations over the Icinga 2 protocol to satellites and/or clients.

More detailed examples can be found in the examples directory.

This example creates the configuration for a master that has one satellite connected. A global zone is created for templates, and all features of a typical master are enabled.

class { '::icinga2':
  confd     => false,
  features  => ['checker','mainlog','notification','statusdata','compatlog','command'],
  constants => {
    'ZoneName' => 'master',
  },
}

class { '::icinga2::feature::api':
  accept_commands => true,
  # when having multiple masters, you should enable:
  # accept_config => true,
  endpoints       => {
    'master.example.org'    => {},
    'satellite.example.org' => {
      'host' => '172.16.2.11'
    }
  },
  zones           => {
    'master' => {
      'endpoints' => ['master.example.org'],
    },
    'dmz'    => {
      'endpoints' => ['satellite.example.org'],
      'parent'    => 'master',
    },
  }
}

icinga2::object::zone { 'global-templates':
  global => true,
}

Satellite

A satellite has a parent zone and one or multiple child zones. Satellites are usually created to distribute the monitoring load or to reach delimited zones in the network. A satellite either executes checks itself or delegates them to a client.

The satellite has fewer features enabled, but executes checks similar to a master. It connects to a master zone, and to a satellite or client below in the hierarchy. As parent acts either the master zone, or another satellite zone.

class { '::icinga2':
  confd     => false,
  features  => ['checker','mainlog'],
  constants => {
    'ZoneName' => 'dmz',
  },
}

class { '::icinga2::feature::api':
  accept_config   => true,
  accept_commands => true,
  endpoints       => {
    'satellite.example.org' => {},
    'master.example.org'    => {
      'host' => '172.16.1.11',
    },
  },
  zones           => {
    'master' => {
      'endpoints' => ['master.example.org'],
    },
    'dmz'    => {
      'endpoints' => ['satellite.example.org'],
      'parent'    => 'master',
    },
  }
}

icinga2::object::zone { 'global-templates':
  global => true,
}

Client

Icinga 2 runs as a client usually on each of your servers. It receives config or commands from a satellite or master zones and runs the checks that have to be executed locally.

The client is connected to the satellite, which is the direct parent zone.

class { '::icinga2':
  confd     => false,
  features  => ['checker','mainlog'],
}

class { '::icinga2::feature::api':
  pki             => 'none',
  accept_config   => true,
  accept_commands => true,
  endpoints       => {
    'NodeName'              => {},
    'satellite.example.org' => {
      'host' => '172.16.2.11',
    }
  },
  zones           => {
    'ZoneName' => {
      'endpoints' => ['NodeName'],
      'parent'    => 'dmz',
    },
    'dmz'      => {
      'endpoints' => ['satellite.example.org'],
    }
  }
}

icinga2::object::zone { 'global-templates':
  global => true,
}

Config Objects

With this module you can create almost every object that Icinga 2 knows about. When creating objects some parameters are required. This module sets the same requirements as Icinga 2 does. When creating an object you must set a target for the configuration.

Here are some examples for some object types:

Host

icinga2::object::host { 'srv-web1.fqdn.com':
  display_name  => 'srv-web1.fqdn.com',
  address       => '127.0.0.1',
  address6      => '::1',
  check_command => 'hostalive',
  target        => '/etc/icinga2/conf.d/srv-web1.fqdn.com.conf',
}

Service

icinga2::object::service { 'uptime':
  host_name      => 'srv-web1.fqdn.com',
  display_name   => 'Uptime',
  check_command  => 'check_uptime',
  check_interval => '600m',
  groups         => ['uptime', 'linux'],
  target         => '/etc/icinga2/conf.d/uptime.conf',
}

Hostgroup

icinga2::object::hostgroup { 'monitoring-hosts':
  display_name => 'Linux Servers',
  groups       => [ 'linux-servers' ],
  target       => '/etc/icinga2/conf.d/groups2.conf',
  assign       => [ 'host.vars.os == linux' ],
}

Parsing Configuration

To generate a valid Icinga 2 configuration all object attributes are parsed. This simple parsing algorithm takes a decision for each attribute, whether part of the string is to be quoted or not, and how an array or dictionary is to be formatted.

Parsing of a single attribute can be disabled by tagging it with -: at the front of the string.

   attr => '-:"unparsed string with quotes"'

An array, a hash or a string can be assigned to an object attribute. True and false are also valid values.

Hashes and arrays are created recursively, and all parts – such as single items of an array, keys and its values are parsed separately as strings.

Strings are parsed in chunks, by splitting the original string into separate substrings at specific keywords (operators) such as +, -, in, &&, ||, etc.

NOTICE: This splitting only works for keywords that are surrounded by whitespace, e.g.:

   attr => 'string1 + string2 - string3'

The algorithm will loop over the parameter and start by splitting it into 'string1' and 'string2 - string3'. 'string1' will be passed to the sub function 'value_types' and then the algorithm will continue parsing the rest of the string ('string2 - string3'), splitting it, passing it to value_types, etc.

Brackets are parsed for expressions:

  attr => '3 * (value1 - value2) / 2'

The parser also detects function calls and will parse all parameters separately.

  attr => 'function(param1, param2, ...)'

True and false can be used as either booleans or strings.

  attrs => true or  attr => 'true'

In Icinga you can write your own lambda functions with {{ ... }}. For Puppet use:

  attrs => '{{ ... }}'

The parser analyzes which parts of the string have to be quoted and which do not.

As a general rule, all fragments are quoted except for the following:

Boolean: true, false
Numbers: 3 or 2.5
Time Intervals: 3m or 2.5h (s = seconds, m = minutes, h = hours, d = days)
Functions: {{ ... }} or function () {}
All constants, which are declared in the constants parameter in main class icinga2
- NodeName
Names of attributes that belong to the same type of object:
- e.g. name and check_command for a host object
All attributes or variables (custom attributes) from the host, service or user contexts:
- host.name, service.check_command, user.groups, ...

What isn't supported?

It's not currently possible to use arrays or dictionaries in a string, like

  attr => 'array1 + [ item1, item2, ... ]'

Assignments other than simple attribution are not currently possible either, e.g. building something like

  vars += config

but you can use the following instead:

  vars = vars + config

Reading objects from hiera data

The following example is for puppet 4 and higher. It shows how icinga2 objects can be read from a hiera datastore. See also examples/objects_from_hiera.pp.

class { 'icinga2':
  manage_repo => true,
}

$defaults = lookup('monitoring::defaults')

lookup('monitoring::objects').each |String $object_type, Hash $content| {
  $content.each |String $object_name, Hash $object_config| {
    ensure_resource(
      $object_type,
      $object_name,
      deep_merge($defaults[$object_type], $object_config))
  }
}

The datastore could be like:

---
monitoring::objects:
  'icinga2::object::host':
    centos7.localdomain:
      address: 127.0.0.1
      vars:
        os: Linux
  'icinga2::object::service':
    ping4:
      check_command: ping4
      apply: true
      assign:
        - host.address
    ssh:
      check_command: ssh
      apply: true
      assign:
        - host.address && host.vars.os == Linux

monitoring::defaults:
  'icinga2::object::host':
    import:
      - generic-host
    target: /etc/icinga2/conf.d/hosts.conf
  'icinga2::object::service':
    import:
      - generic-service
    target: /etc/icinga2/conf.d/services.conf

Apply Rules

Some objects can be applied to other objects. To create a simple apply rule you must set the apply parameter to true. If this parameter is set to a string, this string will be used to build an apply for loop. A service object always targets a host object. All other objects need to explicitly set an apply_target

Apply a SSH service to all Linux hosts:

icinga2::object::service { 'SSH':
  target        => '/etc/icinga2/conf.d/test.conf',
  apply         => true,
  assign        => [ 'host.vars.os == Linux' ],
  ignore        => [ 'host.vars.os == Windows' ],
  display_name  => 'Test Service',
  check_command => 'ssh',
}

Apply notifications to services:

icinga2::object::notification { 'testnotification':
  target       => '/etc/icinga2/conf.d/test.conf',
  apply        => true,
  apply_target => 'Service',
  assign       => [ 'host.vars.os == Linux' ],
  ignore       => [ 'host.vars.os == Windows' ],
  user_groups  => ['icingaadmins']
}

Assign all Linux hosts to a hostgroup:

icinga2::object::hostgroup { 'monitoring-hosts':
  display_name => 'Linux Servers',
  groups       => [ 'linux-servers' ],
  target       => '/etc/icinga2/conf.d/groups2.conf',
  assign       => [ 'host.vars.os == linux' ],
}

A loop to create HTTP services for all vHosts of a host object:

icinga2::object::service { 'HTTP':
  target        => '/etc/icinga2/conf.d/http.conf',
  apply         => 'http_vhost => config in host.vars_http_vhost',
  assign        => [ 'host.vars.os == Linux' ],
  display_name  => 'HTTP Service',
  check_command => 'http',
}

CA and Certificates

Handling the CA and certificates is an important part of Icinga 2, because the communication between Icinga processes requires SSL/TLS client certificates. This module offers multiple choices to configure this.

CA on your Icinga Master

One of your Icinga masters needs to behave as a CA. With the class icinga2::pki::ca you can do the following to fulfill this requirement:

Use the the icinga2 CLI to generate a complete new CA

include ::icinga2
class { '::icinga2::pki::ca':
}

Set a custom content of the CA certificate and key

include ::icinga2
class { '::icinga2::pki::ca':
  ca_cert => '-----BEGIN CERTIFICATE----- ...',
  ca_key  => '-----BEGIN RSA PRIVATE KEY----- ...',
}

Transfer a CA certificate and key from an existing CA by using the file resource:

include ::icinga2
file { '/var/lib/icinga2/ca/ca.crt':
  source => '...',
  tag    => 'icinga2::config::file',
}

file { '/var/lib/icinga2/ca/ca.key':
  source => '...',
  tag    => 'icinga2::config::file',
}

Create a new CA with the icinga2 CLI command and a certificate signed by this new CA. This is useful especially when setting up a new Icinga 2 master.

class { '::icinga2':
  constants => {
    'TicketSalt'   => '5a3d695b8aef8f18452fc494593056a4',
  }
}

class { '::icinga2::pki::ca': }

class { '::icinga2::feature::api':
  pki             => 'none',
  endpoints       => {
    'localhost' => {
      'host' => 'localhost',
    }
  },
  zones           => {
    'master' => {
      'endpoints' => ['localhost']
    }
  }
}

If you are looking for an option to use your Puppet CA, have a look at the Client/Satellite Certificates section.

Client/Satellite Certificates

In addition to the master, each client and satellite needs valid certificates to communicate with other Icinga 2 instances. This module offers following options to create these certificates:

Use Puppet's CA and its client certificates. This is convenient since you don't need to maintain an additional CA.

include ::icinga2::feature::api

Use a custom function implemented in this module to generate a certificate. This feature will do the following:
- Generate a key and certificate based on the FQDN of the host
- Save the certificate of another Icinga 2 instance, usually the Icinga master where your Icinga CA is located
- Generate a ticket based on the TicketSalt
- Request a signed certificate at your Icinga CA

class { '::icinga2::feature::api':
  pki             => 'icinga2',
  ca_host         => 'icinga2-master.example.com',
  ticket_salt     => '5a3d695b8aef8f18452fc494593056a4',
  accept_config   => true,
  accept_commands => true,
  endpoints       => {
    'NodeName'                   => {},
    'icinga2-master.example.com' => {
      'host' => '192.168.56.103',
    }
  },
  zones           => {
    'NodeName' => {
      'endpoints' => ['NodeName'],
      'parent'    => 'master',
    },
    'master' => {
      'endpoints' => ['icinga2-master.example.com']
    }
  }
}

Use custom file resources to transfer your own certificate and key

class { '::icinga2::feature::api':
  pki => 'none',
}

file { "/etc/icinga2/pki/${::fqdn}.crt":
  ensure => file,
  tag    => 'icinga2::config::file,
  source => "puppet:///modules/profiles/certificates/${::fqdn}.crt",
}

file { "/etc/icinga2/pki/${::fqdn}.key":
  ensure => file,
  tag    => 'icinga2::config::file,
  source => "puppet:///modules/profiles/private_keys/${::fqdn}.key",
}

Set a custom content for the certificate and key

class { '::icinga2::feature::api':
  pki         => 'none',
  ssl_cacert  => '-----BEGIN CERTIFICATE----- ...',
  ssl_key     => '-----BEGIN RSA PRIVATE KEY----- ...',
  ssl_cert    => '-----BEGIN CERTIFICATE----- ...',
}

Fine tune TLS / SSL settings

class { '::icinga2::feature::api':
  ssl_protocolmin => 'TLSv1.2',
  ssl_cipher_list => 'HIGH:MEDIUM:!aNULL:!MD5:!RC4',
}

Custom configuration

Sometimes it's necessary to cover very special configurations, that you cannot handle with this module. In this case you can use the icinga2::config::file tag on your file resource. The module collects all file resource types with this tag and triggers a reload of Icinga 2 on a file change.

include ::icinga2
file { '/etc/icinga2/conf.d/for-loop.conf':
  ensure => file,
  source => '...',
  tag    => 'icinga2::config::file',
}

If you want to add custom configuration fragments to existing config files, you can do this with icinga2::config::fragment. It adds content into a specified target to the position you set in the order parameter. You can use also Puppet templates to set the content of the config fragment.

For example, you can add custom functions to existing config files:

include ::icinga2

icinga2::object::service { 'load':
  display_name  => 'Load',
  apply         => true,
  check_command => 'load',
  assign        => ['vars.os == Linux'],
  target        => '/etc/icinga2/conf.d/service_load.conf',
  order         => '30',
}

icinga2::config::fragment { 'load-function':
  target => '/etc/icinga2/conf.d/service_load.conf',
  order => '10',
  content => 'vars.load_wload1 = {{
    if (get_time_period("backup").is_inside) {
      return 20
    } else {
      return 5
    }
  }}',
}

Reference

Public classes
Private classes
Public defined types
Private defined types
- Defined type: icinga2::feature
- Defined type: icinga2::object

Public Classes

Class: `icinga2`

The default class of this module. It handles the basic installation and configuration of Icinga 2. When you declare this class, Puppet will do the following:

Install Icinga 2
Place a default configuration for the Icinga 2 daemon
Keep the default configuration of the Icinga 2 package
Start Icinga 2 and enable the service

This class can be declared without adjusting any parameter:

class { '::icinga2': }

Parameters within icinga2:

`ensure`

Defines if the service should be running or stopped. Defaults to running

`enable`

If set to true the Icinga 2 service will start on boot. Defaults to true.

`manage_repo`

When set to true this module will install the packages.icinga.com repository. With this official repo you can get the latest version of Icinga. When set to false the operating systems default will be used. As the Icinga Project does not offer a Chocolatey repository, you will get a warning if you enable this parameter on Windows. Default is false. NOTE: will be ignored if manage_package is set to false.

`manage_package`

If set to false packages aren't managed. Defaults to true.

`manage_service`

Lets you decide if the Icinga 2 daemon should be reloaded when configuration files have changed. Defaults to true

`features`

A list of features to enable by default. Defaults to [checker, mainlog, notification]

`purge_features`

Define if configuration files for features not managed by Puppet should be purged. Defaults to true.

`constants`

Hash of constants. Defaults are set in the params class. Your settings will be merged with the defaults.

`plugins`

A list of the ITL plugins to load. Defaults to [ 'plugins', 'plugins-contrib', 'windows-plugins', 'nscp' ].

`confd`

conf.d is the directory where Icinga 2 stores its object configuration by default. To disable it, set this parameter to false. By default this parameter is true. It's also possible to assign your own directory. This directory and must be managed outside of this module as file resource with tag icinga2::config::file.

`repositoryd`

repository.d is removed since Icinga 2 2.8.0, set to true (default) will handle the directory. This Parameter will change to false by default in v2.0.0 and will be removed in the future.

Class: `icinga2::feature::checker`

Enables or disables the checker feature.

Parameters of icinga2::feature::checker:

`ensure`

Either present or absent. Defines if the feature checker should be enabled. Defaults to present.

`concurrent_checks`

The maximum number of concurrent checks. Defaults to 512.

Class: `icinga2::feature::mainlog`

Enables or disables the mainlog feature.

Parameters of icinga2::feature::mainlog:

`ensure`

Either present or absent. Defines if the feature mainlog should be enabled. Defaults to present.

`severity`

Sets the severity of the mainlog feature. Can be set to:

information
notice
warning
debug

Defaults to information

`path`

Absolute path to the logging file. Default depends on platform:

Linux: /var/log/icinga2/icinga2.log
Windows: C:/ProgramData/icinga2/var/log/icinga2/icinga2.log

Class: `icinga2::feature::notification`

Enables or disables the notification feature.

Parameters of icinga2::feature::notification:

`ensure`

Either present or absent. Defines if the feature notification should be enabled. Defaults to present.

`enable_ha`

Notifications are load-balanced amongst all nodes in a zone. By default this functionality is enabled. If your nodes should send out notifications independently from any other nodes (this will cause duplicated notifications if not properly handled!), you can set enable_ha to false.

Class: `icinga2::feature::command`

Enables or disables the command feature.

Parameters of icinga2::feature::command:

`ensure`

Either present or absent. Defines if the feature command should be enabled. Defaults to present.

`commandpath`

Absolute path to the command pipe. Default depends on platform:

Linux: /var/run/icinga2/cmd/icinga2.cmd
Windows: C:/ProgramData/icinga2/var/run/icinga2/cmd/icinga2.cmd

Class: `icinga2::feature::compatlog`

Enables or disables the compatlog feature.

Parameters of icinga2::feature::compatlog:

`ensure`

Either present or absent. Defines if the feature compatlog should be enabled. Defaults to present.

`commandpath`

Absolute path to the command pipe. Default depends on platform:

Linux: /var/run/icinga2/cmd/icinga2.cmd
Windows: C:/ProgramData/icinga2/var/run/icinga2/cmd/icinga2.cmd

`log_dir`

Absolute path to the log directory. Default depends on platform:

Linux: /var/log/icinga2/compat
Windows: C:/ProgramData/icinga2/var/log/icinga2/compat

`rotation_method`

Sets how often should the log file be rotated. Valid options are:

HOURLY
DAILY
WEEKLY
MONTHLY

Defaults to DAILY

Class: `icinga2::feature::graphite`

Enables or disables the graphite feature.

Parameters of icinga2::feature::graphite:

`ensure`

Either present or absent. Defines if the feature graphite should be enabled. Defaults to present.

`host`

Graphite Carbon host address. Defaults to 127.0.0.1.

`port`

Graphite Carbon port. Defaults to 2003.

`host_name_template`

Template for metric path of hosts. Defaults to icinga2.$host.name$.host.$host.check_command$.

`service_name_template`

Template for metric path of services. Defaults to icinga2.$host.name$.services.$service.name$.$service.check_command$.

`enable_send_thresholds`

Send thresholds as metrics. Defaults to false.

`enable_send_metadata`

Send metadata as metrics. Defaults to false.

Class: `icinga2::feature::livestatus`

Enables or disables the livestatus feature.

Parameters of icinga2::feature::livestatus:

`ensure`

Either present or absent. Defines if the feature livestatus should be enabled. Defaults to present.

`socket_type`

Specifies the socket type. Can be either 'tcp' or 'unix'. Defaults to 'unix'

`bind_host`

IP address to listen for connections. Only valid when socket_type is tcp. Defaults to 127.0.0.1

`bind_port`

Port to listen for connections. Only valid when socket_type is tcp. Defaults to 6558

`socket_path`

Specifies the path to the UNIX socket file. Only valid when socket_type is unix. Default depends on platform:

Linux: /var/run/icinga2/cmd/livestatus
Windows: C:/ProgramData/icinga2/var/run/icinga2/cmd/livestatus

`compat_log_path`

Required for historical table queries. Requires CompatLogger feature to be enabled. Default depends platform:

Linux: var/icinga2/log/icinga2/compat Windows: C:/ProgramData/icinga2/var/log/icinga2/compat

Class: `icinga2::feature::opentsdb`

Enables or disables the opentsdb feature.

Parameters of icinga2::feature::opentsdb:

`ensure`

Either present or absent. Defines if the feature opentsdb should be enabled. Defaults to present.

`host`

OpenTSDB host address. Defaults to 127.0.0.1

`port`

OpenTSDB port. Defaults to 4242

Class: `icinga2::feature::perfdata`

Enables or disables the perfdata feature.

Parameters of icinga2::feature::perfdata:

`ensure`

Either present or absent. Defines if the feature perfdata should be enabled. Defaults to present.

`host_perfdata_path`

Absolute path to the perfdata file for hosts. Default depends on platform:

Linux: /var/spool/icinga2/host-perfdata
Windows: C:/ProgramData/icinga2/var/spool/icinga2/host-perfdata

`service_perfdata_path`

Absolute path to the perfdata file for services. Default depends on platform:

Linux: /var/spool/icinga2/service-perfdata
Windows: C:/ProgramData/icinga2/var/spool/icinga2/service-perfdata

`host_temp_path`

Path to the temporary host file. Defaults depends on platform:

Linux: /var/spool/icinga2/tmp/host-perfdata
Windows: C:/ProgramData/icinga2/var/spool/icinga2/tmp/host-perfdata

`service_temp_path`

Path to the temporary service file. Defaults depends on platform:

Linux: /var/spool/icinga2/tmp/host-perfdata
Windows: C:/ProgramData/icinga2/var/spool/icinga2/tmp/host-perfdata

`host_format_template`

Host Format template for the performance data file. Defaults to a template that's suitable for use with PNP4Nagios.

`service_format_template`

Service Format template for the performance data file. Defaults to a template that's suitable for use with PNP4Nagios.

`rotation_interval`

Rotation interval for the files specified in {host,service}_perfdata_path. Can be written in minutes or seconds, i.e. 1m or 15s. Defaults to 30s

Class: `icinga2::feature::statusdata`

Enables or disables the statusdata feature.

Parameters of icinga2::feature::statusdata:

`ensure`

Either present or absent. Defines if the feature statusdata should be enabled. Defaults to present.

`status_path`

Absolute path to the status.dat file. Default depends on platform:

Linux: /var/cache/icinga2/status.dat
Windows: C:/ProgramData/icinga2/var/cache/icinga2/status.dat

`object_path`

Absolute path to the object.cache file. Default depends on platform:

Linux: /var/cache/icinga2/object.cache
Windows: C:/ProgramData/icinga2/var/cache/icinga2/object.cache

`update_interval`

Interval in seconds to update both status files. You can also specify it in minutes with the letter m or in seconds with s. Defaults to 30s

Class: `icinga2::feature::syslog`

Enables or disables the syslog feature.

Parameters of icinga2::feature::syslog:

`ensure`

Either present or absent. Defines if the feature syslog should be enabled. Defaults to present.

`severity`

Set severity level for logging to syslog. Available options are:

information
notice
warning
critical
debug

Defaults to warning

`facility`

Defines the facility to use for syslog entries. This can be a facility constant like FacilityDaemon. Defaults to FacilityUser.

Class: `icinga2::feature::debuglog`

Enables or disables the debuglog feature.

Parameters of icinga2::feature::debuglog:

`ensure`

Either present or absent. Defines if the feature debuglog should be enabled. Defaults to present.

`path`

Absolute path to the log file. Default depends on platform:

Linux: /var/log/icinga2/debug.log
Windows: C:/ProgramData/icinga2/var/log/icinga2/debug.log

Class: `icinga2::feature::gelf`

Enables or disables the gelf feature.

Parameters of icinga2::feature::gelf:

`ensure`

Either present or absent. Defines if the feature gelf should be enabled. Defaults to present.

`host`

GELF receiver host address. Defaults to 127.0.0.1

`port`

GELF receiver port. Defaults to 12201

`source`

Source name for this instance. Defaults to icinga2

`enable_send_perfdata`

Enable performance data for CHECK RESULT events. Defaults to false.

Class: `icinga2::feature::influxdb`

Enables or disables the influxdb feature.

Parameters of icinga2::feature::influxdb:

`ensure`

Either present or absent. Defines if the feature influxdb should be enabled. Defaults to present.

`host`

InfluxDB host address. Defaults to 127.0.0.1

`port`

InfluxDB HTTP port. Defaults to 8086

`database`

InfluxDB database name. Defaults to icinga2

`username`

InfluxDB user name. Defaults to undef

`password`

InfluxDB user password. Defaults to undef

`enable_ssl`

Either enable or disable SSL. Other SSL parameters are only affected if this is set to true. Defaults to false.

`pki`

SSL settings will be set depending on this parameter.

puppet Use puppet certificates. This will copy the ca.pem, certificate and key generated by Puppet.
custom Set custom paths for certificate, key and CA
false Disable SSL (default)

`ssl_ca_cert`

CA certificate to validate the remote host. Only valid if ssl is set to custom. Defaults to undef

`ssl_cert`

Host certificate to present to the remote host for mutual verification. Only valid if ssl is set to 'custom'. Defaults to undef

`ssl_key`

Host key to accompany the ssl_cert. Only valid if ssl is set to custom. Defaults to undef

`host_measurement`

The value of this is used for the measurement setting in host_template. Defaults to $host.check_command$

`host_tags`

Tags defined in this hash will be set in the host_template.

class { '::icinga2::feature::influxdb':
  host_measurement => '$host.check_command$',
  host_tags        => { hostname => '$host.name$' },
}

`service_measurement`

The value of this is used for the measurement setting in host_template. Defaults to $service.check_command$

`service_tags`

Tags defined in this hash will be set in the service_template.

class { '::icinga2::feature::influxdb':
  service_measurement => '$service.check_command$',
  service_tags        => { hostname => '$host.name$', service => '$service.name$' },
}

`enable_send_thresholds`

Whether to send warn, crit, min & max tagged data. Defaults to false

`enable_send_metadata`

Whether to send check metadata e.g. states, execution time, latency etc. Defaults to false

`flush_interval`

How long to buffer data points before transferring to InfluxDB. Defaults to 10s

`flush_threshold`

How many data points to buffer before forcing a transfer to InfluxDB. Defaults to 1024

Class: `icinga2::feature::api`

Enables or disables the api feature.

Parameters of icinga2::feature::api:

`ensure`

Either present or absent. Defines if the feature api should be enabled. Defaults to present.

`pki`

Provides multiple sources for the certificate and key.

puppet Copies the key, cert and CA cert from the Puppet ssl directory to the Icinga pki directory.
- Linux: /etc/icinga2/pki
- Windows: C:/ProgramData/icinga2/etc/icinga2/pki
icinga2 Uses the icinga2 CLI to generate a Certificate and Key The ticket is generated on the Puppet master by using the configured 'ticket_salt' in a custom function.
none Does nothing and you either have to manage the files yourself as file resources or use the ssl_key, ssl_cert, ssl_ca parameters.
ca (deprecated) Includes the ::icinga2::pki::ca class to generate a fresh CA and generates an SSL certificate and key signed by this new CA.

Defaults to puppet

`ssl_key_path`

Location of the private key. Default depends on your platform:

Linux /etc/icinga2/pki/NodeName.key
Windows C:/ProgramData/icinga2/etc/icinga2/pki/NodeName.key

The Value of NodeName comes from the corresponding constant.

`ssl_cert_path`

Location of the certificate. Default depends on your platform:

Linux /etc/icinga2/pki/NodeName.crt
Windows C:/ProgramData/icinga2/etc/icinga2/pki/NodeName.crt

The Value of NodeName comes from the corresponding constant.

`ssl_csr_path`

Location of the certificate signing request. Default depends on your platform:

Linux: /etc/icinga2/pki/NodeName.csr
Windows C:/ProgramData/icinga2/etc/icinga2/pki/NodeName.csr

The Value of NodeName comes from the corresponding constant.

`ssl_cacert_path`

Location of the CA certificate. Default depends on your platform:

Linux: /etc/icinga2/pki/ca.crt
Windows C:/ProgramData/icinga2/etc/icinga2/pki/ca.crt

`accept_config`

Accept zone configuration. Defaults to false

`accept_commands`

Accept remote commands. Defaults to false

`ca_host`

This host will be connected to request the certificate. Set this if you use the icinga2 pki.

`ca_port`

Port of the 'ca_host'. Defaults to 5665

`ticket_salt`

Salt to use for ticket generation. The salt is stored to api.conf if none or ca is chosen for pki. Defaults to constant TicketSalt.

`endpoints`

Hash to configure endpoint objects. Defaults to { 'NodeName' => {} }. NodeName is a Icinga 2 constant.

`zones`

Hash to configure zone objects. Defaults to { 'ZoneName' => {'endpoints' => ['NodeName']} }. ZoneName and NodeName are Icinga 2 constants.

`ssl_protocolmin`

Minimal TLS version to require. Default undef (e.g. TLSv1.2)

`ssl_cipher_list`

List of allowed TLS ciphers, to fine tune encryption. Default undef (e.g. HIGH:MEDIUM:!aNULL:!MD5:!RC4)

`bind_host`

The IP address the api listener will be bound to. (e.g. 0.0.0.0)

`bind_port`

The port the api listener will be bound to. (e.g. 5665)

Class: `icinga2::feature::idopgsql`

Enables or disables the ido-pgsql feature.

Parameters of icinga2::feature::idopgsql:

`ensure`

Either present or absent. Defines if the feature ido-pgsql should be enabled. Defaults to present.

`host`

PostgreSQL database host address. Defaults to 127.0.0.1

`port`

PostgreSQL database port. Defaults to 3306

`user`

PostgreSQL database user with read/write permission to the icinga database. Defaults to icinga

`password`

PostgreSQL database user's password. Defaults to icinga

`database`

PostgreSQL database name. Defaults to icinga

`table_prefix`

PostgreSQL database table prefix. Defaults to icinga_

`import_schema`

Whether to import the PostgreSQL schema or not. Defaults to false

Class: `icinga2::feature::idomysql`

Enables or disables the gelf feature.

Parameters of icinga2::feature::idomysql:

`ensure`

Either present or absent. Defines if the feature ido-mysql should be enabled. Defaults to present.

`host`

MySQL database host address. Defaults to 127.0.0.1

`port`

MySQL database port. Defaults to 3306

`socket_path`

MySQL socket path.

`user`

MySQL database user with read/write permission to the icinga database. Defaults to icinga

`password`

MySQL database user's password. Defaults to icinga

`database`

MySQL database name. Defaults to icinga

`ssl`

SSL settings will be set depending on this parameter:

puppet Use puppet certificates
custom Set custom paths for certificate, key and CA
false Disable SSL (default)

`ssl_key`

MySQL SSL client key file path. Only valid if ssl is set to custom.

`ssl_cert`

MySQL SSL certificate file path. Only valid if ssl is set to custom.

`ssl_ca`

MySQL SSL certificate authority certificate file path. Only valid if ssl is set to custom.

`ssl_capath`

MySQL SSL trusted SSL CA certificates in PEM format directory path. Only valid if ssl is enabled.

`ssl_cipher`

MySQL SSL list of allowed ciphers. Only valid if ssl is enabled.

`table_prefix`

MySQL database table prefix. Defaults to icinga_

`instance_name`

Unique identifier for the local Icinga 2 instance. Defaults to default

`instance_description`

Description for the Icinga 2 instance.

`enable_ha`

Enable the high availability functionality. Only valid in a cluster setup. Defaults to true

`failover_timeout`

Set the fail-over timeout in a HA cluster. Must not be lower than 60s. Defaults to 60s

`cleanup`

Hash with items for historical table cleanup.

`categories`

Array of information types that should be written to the database.

`import_schema`

Whether to import the MySQL schema or not. Defaults to false

Class: `icinga2::pki::ca`

This class provides multiple ways to create the CA used by Icinga 2. By default it will create a CA by using the Icinga 2 CLI. If you want to use your own CA you will either have to transfer it by using a file resource or you can set the content of your certificate and key in this class.

Parameters of icinga2::pki::ca:

`ca_cert`

Content of the CA certificate. If this is unset, a certificate will be generated with the Icinga 2 CLI.

`ca_key`

Content of the CA key. If this is unset, a key will be generated with the Icinga 2 CLI.

`ssl_key_path`

Location of the private key. Default depends on your platform:

Linux /etc/icinga2/pki/NodeName.key
Windows C:/ProgramData/icinga2/etc/icinga2/pki/NodeName.key

The Value of NodeName comes from the corresponding constant.

`ssl_cert_path`

Location of the certificate. Default depends on your platform:

Linux /etc/icinga2/pki/NodeName.crt
Windows C:/ProgramData/icinga2/etc/icinga2/pki/NodeName.crt

The Value of NodeName comes from the corresponding constant.

`ssl_csr_path`

Location of the certificate signing request. Default depends on your platform:

Linux: /etc/icinga2/pki/NodeName.csr
Windows C:/ProgramData/icinga2/etc/icinga2/pki/NodeName.csr

The Value of NodeName comes from the corresponding constant.

`ssl_cacert_path`

Location of the CA certificate. Default depends on your platform:

Linux: /etc/icinga2/pki/ca.crt
Windows C:/ProgramData/icinga2/etc/icinga2/pki/ca.crt

Private Classes

Class: `icinga2::repo`

Installs the packages.icinga.com repository. Depending on your operating system puppetlabs/apt or puppetlabs/chocolatey are required.

Class: `icinga2::install`

Handles the installation of the Icinga 2 package.

Class: `icinga2::config`

Installs basic configuration files required to run Icinga 2.

Class: `icinga2::service`

Starts/stops and enables/disables the service.

Public defined types

Defined type: `icinga2::object::endpoint`

`ensure`

Set to present enables the endpoint object, absent disables it. Defaults to present.

`endpoint_name`

Set the Icinga 2 name of the endpoint object. Defaults to title of the define resource.

`host`

Optional. The IP address of the remote Icinga 2 instance.

`port`

The service name/port of the remote Icinga 2 instance. Defaults to 5665.

`log_duration`

Duration for keeping replay logs on connection loss. Defaults to 1d (86400 seconds). Attribute is specified in seconds. If log_duration is set to 0, replaying logs is disabled. You could also specify the value in human readable format like 10m for 10 minutes or 1h for one hour.

`target`

Destination config file to store in this object. File will be declared at the first time.

`order`

String to set the position in the target file, sorted alpha numeric. Defaults to 10.

Defined type: `icinga2::object::zone`

`ensure`

Set to present enables the zone object, absent disables it. Defaults to present

`zone_name`

Set the name of the zone object. Defaults to the title of the define resource.

`endpoints`

List of endpoints that belong to this zone.

`parent`

Parent zone to this zone.

`global`

If set to true, a global zone is defined and the parameter endpoints and parent are ignored. Defaults to false.

`target`

Destination config file to store in this object. File will be declared at the first time.

`order`

String to control the position in the target file, sorted alpha numeric.

Defined type: `icinga2::object::apiuser`

`ensure`

Set to present enables the apiuser object, absent disables it. Defaults to present.

`apiuser_name`

Set the name of the apiuser object. Defaults to title of the define resource.

`password`

Password string.

`client_cn`

Optional. Client Common Name (CN).

`permissions`

Array of permissions. Either as string or dictionary with the keys permission and filter. The latter must be specified as function.

`target`

Destination config file to store in this object. File will be declared at the first time.

`order`

String to control the position in the target file, sorted alpha numeric. Defaults to 10

Examples

permissions = [ "*" ]

permissions = [ "objects/query/Host", "objects/query/Service" ]

permissions = [
  {
    permission = "objects/query/Host"
    filter = {{ regex("^Linux", host.vars.os) }}
  },
  {
    permission = "objects/query/Service"
    filter = {{ regex("^Linux", service.vars.os) }}
  }
]

Defined type: `icinga2::object::checkcommand`

`ensure`

Set to present enables the checkcommand object, absent disables it. Defaults to present.

`checkcommand_name`

Title of the CheckCommand object.

`import`

Sorted List of templates to include. Defaults to an empty list.

`command`

The command. This can either be an array of individual command arguments. Alternatively a string can be specified in which case the shell interpreter (usually /bin/sh) takes care of parsing the command. When using the arguments attribute this must be an array. Can be specified as function for advanced implementations.

`env`

A dictionary of macros which should be exported as environment variables prior to executing the command.

`vars`

A dictionary containing custom attributes that are specific to this command.

`timeout`

The command timeout in seconds. Defaults to 60 seconds.

`arguments`

A dictionary of command arguments.

`target`

Destination config file to store in this object. File will be declared the first time.

`order`

String to set the position in the target file, sorted alpha numeric. Defaults to 10

Defined type: `icinga2::object::host`

`ensure`

Set to present enables the host object, absent disables it. Defaults to present.

`host_name`

Hostname of the Host object.

`import`

Sorted List of templates to include. Defaults to an empty list.

`display_name`

A short description of the host (e.g. displayed by external interfaces instead of the name if set).

`address`

The host's address v4.

`address6`

The host's address v6.

`vars`

A dictionary containing custom attributes that are specific to this host.

`groups`

A list of host groups this host belongs to.

`check_command`

The name of the check command.

`max_check_attempts`

The number of times a host is re-checked before changing into a hard state. Defaults to 3

`check_period`

The name of a time period which determines when this host should be checked. Not set by default.

`check_timeout`

Check command timeout in seconds. Overrides the CheckCommand's timeout attribute.

`check_interval`

The check interval (in seconds). This interval is used for checks when the host is in a HARD state. Defaults to 5 minutes.

`retry_interval`

The retry interval (in seconds). This interval is used for checks when the host is in a SOFT state. Defaults to 1 minute.

`enable_notifications`

Whether notifications are enabled. Defaults to true

`enable_active_checks`

Whether active checks are enabled. Defaults to true

`enable_passive_checks`

Whether passive checks are enabled. Defaults to true

`enable_event_handle`

Enables event handlers for this host. Defaults to true

`enable_flapping`

Whether flap detection is enabled. Defaults to false

`enable_perfdata`

Whether performance data processing is enabled. Defaults to true

`event_command`

The name of an event command that should be executed every time the host's state changes or the host is in a SOFT state.

`flapping_threshold`

The flapping threshold in percent when a host is considered to be flapping.

`volatile`

The volatile setting enables always HARD state types if NOT-OK state changes occur.

`zone`

The zone this object is a member of.

`command_endpoint`

The endpoint where commands are executed on.

`notes`

Notes for the host.

`notes_url`

Url for notes for the host (for example, in notification commands).

`action_url`

Url for actions for the host (for example, an external graphing tool).

`icon_image`

Icon image for the host. Used by external interfaces only.

`icon_image_alt`

Icon image description for the host. Used by external interface only.

`template`

Set to true creates a template instead of an object. Defaults to false

`target`

Destination config file to store in this object. File will be declared the first time.

`order`

String to set the position in the target file, sorted alpha numeric. Defaults to 10

Defined type: `icinga2::object::hostgroup`

`ensure`

Set to present enables the hostgroup object, absent disables it. Defaults to present.

`display_name`

A short description of the host group.

`groups`

An array of nested group names.

`assign`

Assign host group members using the group assign rules.

`target`

Destination config file to store in this object. File will be declared at the first time.

`order`

String to set the position in the target file, sorted alpha numeric. Defaults to 10

Defined type: `icinga2::object::dependency`

`ensure`

Set to present enables the dependency object, absent disabled it. Defaults to present

`dependency_name`

Set the Icinga 2 name of the dependency object. Defaults to title of the define resource.

`parent_host_name`

The parent host.

`parent_service_name`

The parent service. If omitted, this dependency object is treated as host dependency.

`child_host_name`

The child host.

`child_service_name`

The child service. If omitted, this dependency object is treated as host dependency.

`disable_checks`

Whether to disable checks when this dependency fails. Defaults to false

`disable_notifications`

Whether to disable notifications when this dependency fails. Defaults to true

`ignore_soft_states`

Whether to ignore soft states for the reachability calculation. Defaults to true

`period`

Time period during which this dependency is enabled.

`states`

A list of state filters when this dependency should be OK. Defaults to [ OK, Warning ] for services and [ Up ] for hosts.

`apply`

Dispose an apply instead an object if set to 'true'. Value is taken as statement, i.e. 'vhost => config in host.vars.vhosts'. Defaults to false.

`prefix`

Set dependency_name as prefix in front of 'apply for'. Only effects if apply is a string. Defaults to false.

`apply_target`

An object type on which to target the apply rule. Valid values are Host and Service. Defaults to Host.

`assign`

Assign user group members using the group assign rules.

`ignore`

Exclude users using the group ignore rules.

`template`

Set to true creates a template instead of an object. Defaults to false

`import`

Sorted List of templates to include. Defaults to an empty list.

`target`

Destination config file to store in this object. File will be declared the first time.

`order`

String to set the position in the target file, sorted alpha numeric. Defaults to 35

Defined type: `icinga2::object::timeperiod`

`ensure`

Set to present enables the timeperiod object, absent disabled it. Defaults to present

`timeperiod_name`

Set the Icinga 2 name of the timeperiod object. Defaults to title of the define resource.

`display_name`

A short description of the time period.

`import`

Sorted List of templates to include. Defaults to [ "legacy-timeperiod" ].

`ranges`

A dictionary containing information which days and durations apply to this timeperiod.

`prefer_includes`

Boolean whether to prefer timeperiods includes or excludes. Default to true

`excludes`

An array of timeperiods, which should exclude from your timerange.

`includes`

An array of timeperiods, which should include into your timerange

`template`

Set to true creates a template instead of an object. Defaults to false

`target`

Destination config file to store this object in. File will be declared on the first run.

`order`

String to control the position in the target file, sorted alpha numeric.

Defined type: `icinga2::object::usergroup`

`ensure`

Set to present enables the usergroup object, absent disables it. Defaults to present

`usergroup_name`

Set the Icinga 2 name of the usergroup object. Defaults to title of the define resource.

`user_name`

Set the Icinga 2 name of the user object. Defaults to title of the define resource.

`display_name`

A short description of the service group.

`groups`

An array of nested group names.

`assign`

Assign user group members using the group assign rules.

`ignore`

Exclude users using the group ignore rules.

`template`

Set to true creates a template instead of an object. Defaults to false

`import`

Sorted List of templates to include. Defaults to an empty list.

`target`

Destination config file to store in this object. File will be declared the first time.

`order`

String to set the position in the target file, sorted alpha numeric. Defaults to 10

Defined type: `icinga2::object::user`

`ensure`

Set to present enables the user object, absent disables it. Defaults to present

`display_name`

A short description of the user.

`email`

An email string for this user. Useful for notification commands.

`pager`

A pager string for this user. Useful for notification commands.

`vars`

A dictionary containing custom attributes that are specific to this user.

`groups`

An array of group names.

`enable_notifications`

Whether notifications are enabled for this user.

`period`

The name of a time period which determines when a notification for this user should be triggered. Not set by default.

`types`

A set of type filters when this notification should be triggered. By default everything is matched.

`states`

A set of state filters when this notification should be triggered. By default everything is matched.

`template`

Set to true creates a template instead of an object. Defaults to false

`import`

Sorted List of templates to include. Defaults to an empty list.

`target`

Destination config file to store in this object. File will be declared the first time.

`order`

String to set the position in the target file, sorted alpha numeric. Defaults to 30

Defined type: `icinga2::object::notificationcommand`

`ensure`

Set to present enables the notificationcommand object, absent disabled it. Defaults to present.

`notificationcommand_name`

Set the Icinga 2 name of the notificationcommand object. Defaults to title of the define resource.

`execute`

The "execute" script method takes care of executing the notification. The default template "plugin-notification-command" which is imported into all CheckCommand objects takes care of this setting.

`command`

The command. This can either be an array of individual command arguments. Alternatively a string can be specified in which case the shell interpreter (usually /bin/sh) takes care of parsing the command.

`env`

A dictionary of macros which should be exported as environment variables prior to executing the command.

`vars`

A dictionary containing custom attributes that are specific to this command.

`timeout`

The command timeout in seconds. Defaults to 60 seconds.

`arguments`

A dictionary of command arguments.

`template`

Set to true creates a template instead of an object. Defaults to false

`import`

Sorted List of templates to include. Defaults to an empty list.

`target`

Destination config file to store in this object. File will be declared the first time.

`order`

String to set the position in the target file, sorted alpha numeric. Defaults to 10

Defined type: `icinga2::object::notification`

`ensure`

Set to present enables the notification object, absent disables it. Defaults to present

`notification_name`

Set the Icinga 2 name of the notification object. Defaults to title of the define resource.

`host_name`

The name of the host this notification belongs to.

`service_name`

The short name of the service this notification belongs to. If omitted, this notification object is treated as host notification.

`vars`

A dictionary containing custom attributes that are specific to this notification object.

`users`

A list of user names who should be notified.

`user_groups`

A list of user group names who should be notified.

`times`

A dictionary containing begin and end attributes for the notification.

`command`

The name of the notification command which should be executed when the notification is triggered.

`interval`

The notification interval (in seconds). This interval is used for active notifications. Defaults to 30 minutes. If set to 0, re-notifications are disabled.

`period`

The name of a time period which determines when this notification should be triggered. Not set by default.

`zone`

The zone this object is a member of.

`types`

A list of type filters when this notification should be triggered. By default everything is matched.

`states`

A list of state filters when this notification should be triggered. By default everything is matched.

`apply`

Dispose an apply instead an object if set to 'true'. Value is taken as statement, i.e. 'vhost => config in host.vars.vhosts'. Defaults to false.

`prefix`

Set notification_name as prefix in front of 'apply for'. Only effects if apply is a string. Defaults to false.

`apply_target`

An object type on which to target the apply rule. Valid values are Host and Service. Defaults to Host.

`template`

Set to true creates a template instead of an object. Defaults to false

`import`

Sorted List of templates to include. Defaults to an empty list.

`target`

Destination config file to store in this object. File will be declared the first time.

`order`

String to set the position in the target file, sorted alpha numeric. Defaults to 10

Defined type: `icinga2::object::service`

`ensure`

Set to present enables the service object, absent disables it. Defaults to present

`service_name`

Set the Icinga 2 name of the service object. Defaults to title of the define resource.

`display_name`

A short description of the service.

`host_name`

The host this service belongs to. There must be a Host object with that name.

`name`

The service name. Must be unique on a per-host basis (Similar to the service_description attribute in Icinga 1.x).

`groups`

The service groups this service belongs to.

`vars`

A dictionary containing custom attributes that are specific to this service.

`check_command`

The name of the check command.

`max_check_attempts`

The number of times a service is re-checked before changing into a hard state. Defaults to 3

`check_period`

The name of a time period which determines when this service should be checked. Not set by default.

`check_timeout`

Check command timeout in seconds. Overrides the CheckCommand's timeout attribute.

`check_interval`

The check interval (in seconds). This interval is used for checks when the service is in a HARD state. Defaults to 5 minutes.

`retry_interval`

The retry interval (in seconds). This interval is used for checks when the service is in a SOFT state. Defaults to 1 minute.

`enable_notifications`

Whether notifications are enabled. Defaults to true

`enable_active_checks`

Whether active checks are enabled. Defaults to true

`enable_passive_checks`

Whether passive checks are enabled. Defaults to true

`enable_event_handler`

Enables event handlers for this host. Defaults to true

`enable_flapping`

Whether flap detection is enabled. Defaults to false

`enable_perfdata`

Whether performance data processing is enabled. Defaults to true

`event_command`

The name of an event command that should be executed every time the service's state changes or the service is in a SOFT state.

`flapping_threshold`

The flapping threshold in percent when a service is considered to be flapping.

`volatile`

The volatile setting enables always HARD state types if NOT-OK state changes occur.

`zone`

The zone this object is a member of.

`command_endpoint`

The endpoint where commands are executed on.

`notes`

Notes for the service.

`notes_url`

Url for notes for the service (for example, in notification commands).

`action_url`

Url for actions for the service (for example, an external graphing tool).

`icon_image`

Icon image for the service. Used by external interfaces only.

`icon_image_alt`

Icon image description for the service. Used by external interface only.

`apply`

Dispose an apply instead an object if set to 'true'. Value is taken as statement, i.e. 'vhost => config in host.vars.vhosts'. Defaults to false.

`prefix`

Set service_name as prefix in front of 'apply for'. Only effects if apply is a string. Defaults to false.

`assign`

Assign user group members using the group assign rules.

`ignore`

Exclude users using the group ignore rules.

`template`

Set to true creates a template instead of an object. Defaults to false

`import`

Sorted List of templates to include. Defaults to an empty list.

`target`

Destination config file to store in this object. File will be declared the first time.

`order`

String to set the position in the target file, sorted alpha numeric. Defaults to 10

Defined type: `icinga2::object::servicegroup`

`ensure`

Set to present enables the servicegroup object, absent disables it. Defaults to present

`servicegroup_name`

Set the Icinga 2 name of the servicegroup object. Defaults to title of the define resource.

`display_name`

A short description of the service group.

`groups`

An array of nested group names.

`assign`

Assign user group members using the group assign rules.

`ignore`

Exclude users using the group ignore rules.

`template`

Set to true creates a template instead of an object. Defaults to false

`import`

Sorted List of templates to include. Defaults to an empty list.

`target`

Destination config file to store in this object. File will be declared the first time.

`order`

String to set the position in the target file, sorted alpha numeric. Defaults to 30

Defined type: `icinga2::object::downtime`

`ensure`

Set to present enables the downtime object, absent disables it. Defaults to present

`host_name`

The name of the host this comment belongs to.

`service_name`

The short name of the service this comment belongs to. If omitted, this comment object is treated as host comment.

`author`

The author's name.

`comment`

The comment text.

`start_time`

The start time as unix timestamp.

`end_time`

The end time as unix timestamp.

`duration`

The duration as number.

`entry_time`

The unix timestamp when this downtime was added.

`fixed`

Whether the downtime is fixed (true) or flexible (false). Defaults to flexible.

`triggers`

List of downtimes which should be triggered by this downtime.

`target`

Destination config file to store in this object. File will be declared the first time.

`order`

String to set the position in the target file, sorted alpha numeric. Defaults to 30

Defined type: `icinga2::object::scheduleddowntime`

`ensure`

Set to present enables the scheduleddowntime object, absent disables it. Defaults to present

`scheduleddowntime_name`

Set the Icinga 2 name of the scheduleddowntime object. Defaults to title of the define resource.

`host_name`

The name of the host this comment belongs to.

`service_name`

The short name of the service this comment belongs to. If omitted, this comment object is treated as host comment.

`author`

The author's name.

`comment`

The comment text.

`fixed`

Whether this is a fixed downtime. Defaults to true

`duration`

The duration as number.

`ranges`

A dictionary containing information which days and durations apply to this timeperiod.

`apply`

Dispose an apply instead an object if set to 'true'. Value is taken as statement, i.e. 'vhost => config in host.vars.vhosts'. Defaults to false.

`prefix`

Set scheduleddowntime_name as prefix in front of 'apply for'. Only effects if apply is a string. Defaults to false.

`apply_target`

An object type on which to target the apply rule. Valid values are Host and Service. Defaults to Host.

`assign`

Assign user group members using the group assign rules.

`ignore`

Exclude users using the group ignore rules.

`target`

Destination config file to store in this object. File will be declared the first time.

`order`

String to set the position in the target file, sorted alpha numeric. Defaults to 30

Defined type: `icinga2::object::eventcommand`

`ensure`

Set to present enables the eventcommand object, absent disables it. Defaults to present

`eventcommand_name`

Set the Icinga 2 name of the eventcommand object. Defaults to title of the define resource.

`execute`

The "execute" script method takes care of executing the event handler. In virtually all cases you should import the "plugin-event-command" template to take care of this setting.

`command`

The command. This can either be an array of individual command arguments. Alternatively a string can be specified in which case the shell interpreter (usually /bin/sh) takes care of parsing the command.

`env`

A dictionary of macros which should be exported as environment variables prior to executing the command.

`vars`

A dictionary containing custom attributes that are specific to this command.

`timeout`

The command timeout in seconds. Defaults to 60 seconds.

`arguments`

A dictionary of command arguments.

`target`

Destination config file to store in this object. File will be declared the first time.

`import`

Sorted List of templates to include. Defaults to an empty list.

`order`

String to set the position in the target file, sorted alpha numeric. Defaults to 30

Defined type: `icinga2::object::checkresultreader`

`ensure`

Set to present enables the checkresultreader object, absent disables it. Defaults to present

`checkresultreader_name`

Set the Icinga 2 name of the checkresultreader object. Defaults to title of the define resource.

`spool_dir`

The directory which contains the check result files. Defaults to LocalStateDir + "/lib/icinga2/spool/checkresults/"

`target`

Destination config file to store in this object. File will be declared the first time.

`order`

String to set the position in the target file, sorted alpha numeric. Defaults to 30

Defined type: `icinga2::object::compatlogger`

`ensure`

Set to present enables the compatlogger object, absent disables it. Defaults to present

`compatlogger_name`

Set the Icinga 2 name of the compatlogger object. Defaults to title of the define resource.

`spool_dir`

The directory which contains the check result files. Defaults to LocalStateDir + "/lib/icinga2/spool/checkresults/"

`target`

Destination config file to store in this object. File will be declared the first time.

`order`

String to set the position in the target file, sorted alpha numeric. Defaults to 30

Defined type: `icinga2::config::fragment`

`content`

Content to insert in file specified in target.

`target`

Destination config file to store in this fragment. File will be declared the first time.

`order`

String to set the position in the target file, sorted in alpha numeric order.

Private defined types

Defined type: `icinga2::feature`

This defined type is used by all feature defined types as basis. It can generally enable or disable features.

Parameters of icinga2::feature:

`ensure`

Either present or absent. Defines if the feature should be enabled. Defaults to present.

`feature`

Name of the feature. This name is used for the corresponding configuration file.

Defined type: `icinga2::object`

This defined type is used by all object defined types as bases. In can generally create Icinga 2 objects.

`ensure`

Set to present enables the object, absent disabled it. Defaults to present.

`object_name`

Set the icinga2 name of the object. Defaults to title of the define resource.

`template`

Set to true will define a template otherwise an object. Defaults to false.

`apply`

Dispose an apply instead an object if set to 'true'. Value is taken as statement, i.e. 'vhost => config in host.vars.vhosts'. Defaults to false.

`apply_target`

An object type on which to target the apply rule. Valid values are Host and Service. Defaults to Host.

`import`

A sorted list of templates to import in this object. Defaults to an empty array.

`attrs`

Hash for the attributes of this object. Keys are the attributes and values are there values. Defaults to an empty Hash.

`object_type`

Icinga 2 object type for this object.

`target`

Destination config file to store in this object. File will be declared the first time.

`order`

String to set the position in the target file, sorted alpha numeric.

Development

A roadmap of this project is located at https://github.com/Icinga/puppet-icinga2/milestones. Please consider this roadmap when you start contributing to the project.

Contributing

When contributing several steps such as pull requests and proper testing implementations are required. Find a detailed step by step guide in CONTRIBUTING.md.

Testing

Testing is essential in our workflow to ensure a good quality. We use RSpec as well as Serverspec to test all components of this module. For a detailed description see TESTING.md.

Release Notes

When releasing new versions we refer to SemVer 1.0.0 for version numbers. All steps required when creating a new release are described in RELEASE.md

Authors

AUTHORS is generated on each release.

Name		Name	Last commit message	Last commit date
Latest commit History 946 Commits
.github		.github
examples		examples
lib		lib
manifests		manifests
serverspec		serverspec
spec		spec
templates		templates
.fixtures.puppet3.yml		.fixtures.puppet3.yml
.fixtures.yml		.fixtures.yml
.gitignore		.gitignore
.mailmap		.mailmap
.travis.yml		.travis.yml
AUTHORS		AUTHORS
CHANGELOG.md		CHANGELOG.md
CONTRIBUTING.md		CONTRIBUTING.md
Gemfile		Gemfile
LICENSE		LICENSE
README.md		README.md
RELEASE.md		RELEASE.md
Rakefile		Rakefile
TESTING.md		TESTING.md
metadata.json		metadata.json

License

benningm/puppet-icinga2

Folders and files

Latest commit

History

Repository files navigation

Icinga 2 Puppet Module

Table of Contents

Overview

Notices

Module Description

Setup

What the Icinga 2 Puppet module supports

Dependencies

Limitations

Usage

Installing Icinga 2

Enabling Features

Setting up Icinga IDO

MySQL

PostgreSQL

Clustering Icinga 2

Master

Satellite

Client

Config Objects

Host

Service

Hostgroup

Parsing Configuration

What isn't supported?

Reading objects from hiera data

Apply Rules

CA and Certificates

CA on your Icinga Master

Client/Satellite Certificates

Custom configuration

Reference

Public Classes

Class: icinga2

ensure

enable

manage_repo

manage_package

manage_service

features

purge_features

constants

plugins

confd

repositoryd

Class: icinga2::feature::checker

ensure

concurrent_checks

Class: icinga2::feature::mainlog

ensure

severity

path

Class: icinga2::feature::notification

ensure

enable_ha

Class: icinga2::feature::command

ensure

commandpath

Class: icinga2::feature::compatlog

ensure

commandpath

log_dir

rotation_method

Class: icinga2::feature::graphite

ensure

host

port

host_name_template

service_name_template

enable_send_thresholds

enable_send_metadata

Class: icinga2::feature::livestatus

ensure

socket_type

Class: `icinga2`

`ensure`

`enable`

`manage_repo`

`manage_package`

`manage_service`

`features`

`purge_features`

`constants`

`plugins`

`confd`

`repositoryd`

Class: `icinga2::feature::checker`

`ensure`

`concurrent_checks`

Class: `icinga2::feature::mainlog`

`ensure`

`severity`

`path`

Class: `icinga2::feature::notification`

`ensure`

`enable_ha`

Class: `icinga2::feature::command`

`ensure`

`commandpath`

Class: `icinga2::feature::compatlog`

`ensure`

`commandpath`

`log_dir`

`rotation_method`

Class: `icinga2::feature::graphite`

`ensure`

`host`

`port`

`host_name_template`

`service_name_template`

`enable_send_thresholds`

`enable_send_metadata`

Class: `icinga2::feature::livestatus`

`ensure`

`socket_type`

`bind_host`

`bind_port`

`socket_path`

`compat_log_path`

Class: `icinga2::feature::opentsdb`

`ensure`

`host`

`port`

Class: `icinga2::feature::perfdata`

`ensure`

`host_perfdata_path`

`service_perfdata_path`

`host_temp_path`

`service_temp_path`

`host_format_template`

`service_format_template`

`rotation_interval`

Class: `icinga2::feature::statusdata`

`ensure`

`status_path`

`object_path`

`update_interval`

Class: `icinga2::feature::syslog`

`ensure`

`severity`

`facility`

Class: `icinga2::feature::debuglog`

`ensure`

`path`

Class: `icinga2::feature::gelf`

`ensure`

`host`

`port`

`source`

`enable_send_perfdata`

Class: `icinga2::feature::influxdb`

`ensure`

`host`

`port`