A minimal Ubuntu base image modified for Docker-friendliness

Baseimage-docker is a special Docker image that is configured for correct use within Docker containers. It is Ubuntu, plus:

• Modifications for Docker-friendliness.
• Workarounds for some Docker bugs.
• Useful administration tools.

You can use it as a base for your own Docker images.

Baseimage-docker is available for pulling from the Docker registry!

What are the problems with the stock Ubuntu base image?

Ubuntu is not designed to be run inside Docker. Its init system, Upstart, assumes that it's running on either real hardware or virtualized hardware, but not inside a Docker container. But inside a container you don't want a full system anyway, you want a minimal system. But configuring that minimal system for use within a container has many strange corner cases that are hard to get right if you are not intimately familiar with the Unix system model. This can cause a lot of strange problems.

Baseimage-docker gets everything right. The "Contents" section describes all the things that it modifies.

Why use baseimage-docker?

You can configure the stock ubuntu image yourself from your Dockerfile, so why bother using baseimage-docker?

• Configuring the base system for Docker-friendliness is no easy task. As stated before, there are many corner cases. By the time that you've gotten all that right, you've reinvented baseimage-docker. Using baseimage-docker will save you from this effort.
• It reduces the time needed to write a correct Dockerfile. You won't have to worry about the base system and can focus on your stack and your app.
• It reduces the time needed to run docker build, allowing you to iterate your Dockerfile more quickly.
• It reduces download time during redeploys. Docker only needs to download the base image once: during the first deploy. On every subsequent deploys, only the changes you make on top of the base image are downloaded.

---

Related resources: Website | Github | Docker registry | Discussion forum | Twitter | Blog

Table of contents

• What's inside the image?
  • Overview
  • Wait, I thought Docker is about running a single process in a container?
• Inspecting baseimage-docker
• Using baseimage-docker as base image
  • Getting started
  • Adding additional daemons
  • Running scripts during container startup
  • Environment variables
    • Centrally defining your own environment variables
    • Environment variable dumps
    • Modifying environment variables
    • Security
  • Working around Docker's inability to modify /etc/hosts
  • Disabling SSH
• Container administration
  • Running a one-shot command in a new container
  • Running a command in an existing, running container
  • Login to the container via nsenter
    • Usage
    • The docker-bash tool
  • Login to the container via SSH
    • Using the insecure key for one container only
    • Enabling the insecure key permanently
    • Using your own key
    • The docker-ssh tool
• Building the image yourself
• Conclusion

---

What's inside the image?

Overview

Looking for a more complete base image, one that is ideal for Ruby, Python, Node.js and Meteor web apps? Take a look at passenger-docker.

Component	Why is it included? / Remarks
Ubuntu 14.04 LTS	The base system.
A correct init process	According to the Unix process model, the init process -- PID 1 -- inherits all orphaned child processes and must reap them. Most Docker containers do not have an init process that does this correctly, and as a result their containers become filled with zombie processes over time. Furthermore, docker stop sends SIGTERM to the init process, which is then supposed to stop all services. Unfortunately most init systems don't do this correctly within Docker since they're built for hardware shutdowns instead. This causes processes to be hard killed with SIGKILL, which doesn't give them a chance to correctly deinitialize things. This can cause file corruption. Baseimage-docker comes with an init process /sbin/my_init that performs both of these tasks correctly.
Fixes APT incompatibilities with Docker	See moby/moby#1024.
Workarounds for Docker bugs	Learn more.
syslog-ng	A syslog daemon is necessary so that many services - including the kernel itself - can correctly log to /var/log/syslog. If no syslog daemon is running, a lot of important messages are silently swallowed. Only listens locally.
logrotate	Rotates and compresses logs on a regular basis.
SSH server	Allows you to easily login to your container to inspect or administer things. SSH is only one of the methods provided by baseimage-docker for this purpose. The other method is through the nsenter tool. SSH is also provided as an option because nsenter has many issues. Password and challenge-response authentication are disabled by default. Only key authentication is allowed. SSH access can be easily disabled if you so wish. Read on for instructions.
cron	The cron daemon must be running for cron jobs to work.
runit	Replaces Ubuntu's Upstart. Used for service supervision and management. Much easier to use than SysV init and supports restarting daemons when they crash. Much easier to use and more lightweight than Upstart.
setuser	A tool for running a command as another user. Easier to use than su, has a smaller attack vector than sudo, and unlike chpst this tool sets $HOME correctly. Available as /sbin/setuser.

Baseimage-docker is very lightweight: it only consumes 6 MB of memory.

Wait, I thought Docker is about running a single process in a container?

Absolutely not true. Docker runs fine with multiple processes in a container. In fact, there is no technical reason why you should limit yourself to one process - it only makes things harder for you and breaks all kinds of essential system functionality, e.g. syslog.

Baseimage-docker encourages multiple processes through the use of runit.

Inspecting baseimage-docker

To look around in the image, run:

docker run --rm -t -i phusion/baseimage:<VERSION> /sbin/my_init -- bash -l

where <VERSION> is one of the baseimage-docker version numbers.

You don't have to download anything manually. The above command will automatically pull the baseimage-docker image from the Docker registry.

Using baseimage-docker as base image

Getting started

The image is called phusion/baseimage, and is available on the Docker registry.

# Use phusion/baseimage as base image. To make your builds reproducible, make
# sure you lock down to a specific version, not to `latest`!
# See https://github.com/phusion/baseimage-docker/blob/master/Changelog.md for
# a list of version numbers.
FROM phusion/baseimage:<VERSION>

# Set correct environment variables.
ENV HOME /root

# Regenerate SSH host keys. baseimage-docker does not contain any, so you
# have to do that yourself. You may also comment out this instruction; the
# init system will auto-generate one during boot.
RUN /etc/my_init.d/00_regen_ssh_host_keys.sh

# Use baseimage-docker's init system.
CMD ["/sbin/my_init"]

# ...put your own build instructions here...

# Clean up APT when done.
RUN apt-get clean && rm -rf /var/lib/apt/lists/* /tmp/* /var/tmp/*

Adding additional daemons

You can add additional daemons (e.g. your own app) to the image by creating runit entries. You only have to write a small shell script which runs your daemon, and runit will keep it up and running for you, restarting it when it crashes, etc.

The shell script must be called run, must be executable, and is to be placed in the directory /etc/service/<NAME>.

Here's an example showing you how a memcached server runit entry can be made.

### In memcached.sh (make sure this file is chmod +x):
#!/bin/sh
# `/sbin/setuser memcache` runs the given command as the user `memcache`.
# If you omit that part, the command will be run as root.
exec /sbin/setuser memcache /usr/bin/memcached >>/var/log/memcached.log 2>&1

### In Dockerfile:
RUN mkdir /etc/service/memcached
ADD memcached.sh /etc/service/memcached/run

Note that the shell script must run the daemon without letting it daemonize/fork it. Usually, daemons provide a command line flag or a config file option for that.

Running scripts during container startup

The baseimage-docker init system, /sbin/my_init, runs the following scripts during startup, in the following order:

• All executable scripts in /etc/my_init.d, if this directory exists. The scripts are run in lexicographic order.
• The script /etc/rc.local, if this file exists.

All scripts must exit correctly, e.g. with exit code 0. If any script exits with a non-zero exit code, the booting will fail.

The following example shows how you can add a startup script. This script simply logs the time of boot to the file /tmp/boottime.txt.

### In logtime.sh (make sure this file is chmod +x):
#!/bin/sh
date > /tmp/boottime.txt

### In Dockerfile:
RUN mkdir -p /etc/my_init.d
ADD logtime.sh /etc/my_init.d/logtime.sh

Environment variables

If you use /sbin/my_init as the main container command, then any environment variables set with docker run --env or with the ENV command in the Dockerfile, will be picked up by my_init. These variables will also be passed to all child processes, including /etc/my_init.d startup scripts, Runit and Runit-managed services. There are however a few caveats you should be aware of:

• Environment variables on Unix are inherited on a per-process basis. This means that it is generally not possible for a child process to change the environment variables of other processes.
• Because of the aforementioned point, there is no good central place for defining environment variables for all applications and services. Debian has the /etc/environment file but it only works in some situations.
• Some services change environment variables for child processes. Nginx is one such example: it removes all environment variables unless you explicitly instruct it to retain them through the env configuration option. If you host any applications on Nginx (e.g. using the passenger-docker image, or using Phusion Passenger in your own image) then they will not see the environment variables that were originally passed by Docker.

my_init provides a solution for all these caveats.

Centrally defining your own environment variables

During startup, before running any startup scripts, my_init imports environment variables from the directory /etc/container_environment. This directory contains files who are named after the environment variable names. The file contents contain the environment variable values. This directory is therefore a good place to centrally define your own environment variables, which will be inherited by all startup scripts and Runit services.

For example, here's how you can define an environment variable from your Dockerfile:

RUN echo Apachai Hopachai > /etc/container_environment/MY_NAME

You can verify that it works, as follows:

$ docker run -t -i <YOUR_NAME_IMAGE> /sbin/my_init -- bash -l
...
*** Running bash -l...
# echo $MY_NAME
Apachai Hopachai

Handling newlines

If you've looked carefully, you'll notice that the 'echo' command actually prints a newline. Why does $MY_NAME not contain a newline then? It's because my_init strips the trailing newline, if any. If you intended on the value having a newline, you should add another newline, like this:

RUN echo -e "Apachai Hopachai\n" > /etc/container_environment/MY_NAME

Environment variable dumps

While the previously mentioned mechanism is good for centrally defining environment variables, it by itself does not prevent services (e.g. Nginx) from changing and resetting environment variables from child processes. However, the my_init mechanism does make it easy for you to query what the original environment variables are.

During startup, right after importing environment variables from /etc/container_environment, my_init will dump all its environment variables (that is, all variables imported from container_environment, as well as all variables it picked up from docker run --env) to the following locations, in the following formats:

• /etc/container_environment
• /etc/container_environment.sh - a dump of the environment variables in Bash format. You can source the file directly from a Bash shell script.
• /etc/container_environment.json - a dump of the environment variables in JSON format.

The multiple formats makes it easy for you to query the original environment variables no matter which language your scripts/apps are written in.

Here is an example shell session showing you how the dumps look like:

$ docker run -t -i \
  --env FOO=bar --env HELLO='my beautiful world' \
  phusion/baseimage:<VERSION> /sbin/my_init -- \
  bash -l
...
*** Running bash -l...
# ls /etc/container_environment
FOO  HELLO  HOME  HOSTNAME  PATH  TERM  container
# cat /etc/container_environment/HELLO; echo
my beautiful world
# cat /etc/container_environment.json; echo
{"TERM": "xterm", "container": "lxc", "HOSTNAME": "f45449f06950", "HOME": "/root", "PATH": "/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin", "FOO": "bar", "HELLO": "my beautiful world"}
# source /etc/container_environment.sh
# echo $HELLO
my beautiful world

Modifying environment variables

It is even possible to modify the environment variables in my_init (and therefore the environment variables in all child processes that are spawned after that point in time), by altering the files in /etc/container_environment. After each time my_init runs a startup script, it resets its own environment variables to the state in /etc/container_environment, and re-dumps the new environment variables to container_environment.sh and container_environment.json.

But note that:

• modifying container_environment.sh and container_environment.json has no effect.
• Runit services cannot modify the environment like that. my_init only activates changes in /etc/container_environment when running startup scripts.

Security

Because environment variables can potentially contain sensitive information, /etc/container_environment and its Bash and JSON dumps are by default owned by root, and accessible only by the docker_env group (so that any user added this group will have these variables automatically loaded).

If you are sure that your environment variables don't contain sensitive data, then you can also relax the permissions on that directory and those files by making them world-readable:

RUN chmod 755 /etc/container_environment
RUN chmod 644 /etc/container_environment.sh /etc/container_environment.json

Working around Docker's inability to modify /etc/hosts

It is currently not possible to modify /etc/hosts inside a Docker container because of Docker bug 2267. Baseimage-docker includes a workaround for this. You have to be explicitly opt-in for the workaround.

The workaround involves modifying a system library, libnss_files.so.2, so that it looks for the host file in /etc/workaround-docker-2267/hosts instead of /etc/hosts. Instead of modifying /etc/hosts, you modify /etc/workaround-docker-2267/hosts instead.

Add this to your Dockerfile to opt-in for the workaround. This command modifies libnss_files.so.2 as described above.

RUN /usr/bin/workaround-docker-2267

(You don't necessarily have to run this command from the Dockerfile. You can also run it from a shell inside the container.)

To verify that it works, open a bash shell in your container, modify /etc/workaround-docker-2267/hosts, and check whether it had any effect:

bash# echo 127.0.0.1 my-test-domain.com >> /etc/workaround-docker-2267/hosts
bash# ping my-test-domain.com
...should ping 127.0.0.1...

Note on apt-get upgrading: if any Ubuntu updates overwrite libnss_files.so.2, then the workaround is removed. You have to re-enable it by running /usr/bin/workaround-docker-2267. To be safe, you should run this command every time after running apt-get upgrade.

Disabling SSH

Baseimage-docker enables an SSH server by default, so that you can use SSH to administer your container. In case you do not want to enable SSH, here's how you can disable it:

RUN rm -rf /etc/service/sshd /etc/my_init.d/00_regen_ssh_host_keys.sh

Container administration

One of the ideas behind Docker is that containers should be stateless, easily restartable, and behave like a black box. However, you may occasionally encounter situations where you want to login to a container, or to run a command inside a container, for development, inspection and debugging purposes. This section describes how you can administer the container for those purposes.

Running a one-shot command in a new container

Note: This section describes how to run a command insider a -new- container. To run a command inside an existing running container, see Running a command in an existing, running container.

Normally, when you want to create a new container in order to run a single command inside it, and immediately exit after the command exits, you invoke Docker like this:

docker run YOUR_IMAGE COMMAND ARGUMENTS...

However the downside of this approach is that the init system is not started. That is, while invoking COMMAND, important daemons such as cron and syslog are not running. Also, orphaned child processes are not properly reaped, because COMMAND is PID 1.

Baseimage-docker provides a facility to run a single one-shot command, while solving all of the aforementioned problems. Run a single command in the following manner:

docker run YOUR_IMAGE /sbin/my_init -- COMMAND ARGUMENTS ...

This will perform the following:

• Runs all system startup files, such as /etc/my_init.d/* and /etc/rc.local.
• Starts all runit services.
• Runs the specified command.
• When the specified command exits, stops all runit services.

For example:

$ docker run phusion/baseimage:<VERSION> /sbin/my_init -- ls
*** Running /etc/my_init.d/00_regen_ssh_host_keys.sh...
No SSH host key available. Generating one...
Creating SSH2 RSA key; this may take some time ...
Creating SSH2 DSA key; this may take some time ...
Creating SSH2 ECDSA key; this may take some time ...
*** Running /etc/rc.local...
*** Booting runit daemon...
*** Runit started as PID 80
*** Running ls...
bin  boot  dev  etc  home  image  lib  lib64  media  mnt  opt  proc  root  run  sbin  selinux  srv  sys  tmp  usr  var
*** ls exited with exit code 0.
*** Shutting down runit daemon (PID 80)...
*** Killing all processes...

You may find that the default invocation is too noisy. Or perhaps you don't want to run the startup files. You can customize all this by passing arguments to my_init. Invoke docker run YOUR_IMAGE /sbin/my_init --help for more information.

The following example runs ls without running the startup files and with less messages, while running all runit services:

$ docker run phusion/baseimage:<VERSION> /sbin/my_init --skip-startup-files --quiet -- ls
bin  boot  dev  etc  home  image  lib  lib64  media  mnt  opt  proc  root  run  sbin  selinux  srv  sys  tmp  usr  var

Running a command in an existing, running container

There are two ways to run a command inside an existing, running container.

• Through the nsenter tool. This tool uses Linux kernel system calls in order to execute a command within the context of a container. Learn more in Login to the container, or running a command inside it, via nsenter.
• Through SSH. This approach requires running an SSH daemon inside the container, and requires you to setup SSH keys. Learn more in Login to the container, or running a command inside it, via SSH.

Both way have their own pros and cons, which you can learn in their respective subsections.

Login to the container, or running a command inside it, via nsenter

You can use the nsenter tool on the Docker host OS to login to any container that is based on baseimage-docker. You can also use it to run a command inside a running container. nsenter works by using Linux kernel system calls.

Here's how it compares to using SSH to login to the container or to run a command inside it:

• Pros
  • Does not require running an SSH daemon inside the container.
  • Does not require setting up SSH keys.
  • Works on any container, even containers not based on baseimage-docker.
• Cons
  • Processes executed by nsenter behave in a slightly different manner than normal. For example, they cannot be killed by any normal processes inside the container. This applies to all child processes as well.
  • If the nsenter process is terminated by a signal (e.g. with the kill command), then the command that is executed by nsenter is not killed and cleaned up. You will have to do that manually. (Note that terminal control commands like Ctrl-C do clean up all child processes, because terminal signals are sent to all processes in the terminal session.)
  • Requires learning another tool.
  • Requires root privileges on the Docker host.
  • Requires the nsenter tool to be available on the Docker host. At the time of writing (July 2014), most Linux distributions do not ship it. However, baseimage-docker provides a precompiled binary, and allows you to easily use it, through its docker-bash tool.
  • Not possible to allow users to login to the container without also letting them login to the Docker host.

Usage

First, ensure that nsenter is installed. At the time of writing (July 2014), almost no Linux distribution ships the nsenter tool. However, we provide a precompiled binary that anybody can use.

Anyway, start a container:

docker run YOUR_IMAGE

Find out the ID of the container that you just ran:

docker ps

Once you have the ID, look for the PID of the main process inside the container.

docker inspect -f "{{ .State.Pid }}" <ID>

Now that you have the container's main process PID, you can use nsenter to login to the container, or to execute a command inside it:

# Login to the container
nsenter --target <MAIN PROCESS PID> --mount --uts --ipc --net --pid bash -l

# Running a command inside the container
nsenter --target <MAIN PROCESS PID> --mount --uts --ipc --net --pid -- echo hello world

The docker-bash tool

Looking up the main process PID of a container and typing the long nsenter command quickly becomes tedious. Luckily, we provide the docker-bash tool which automates this process. This tool is to be run on the Docker host, not inside a Docker container.

This tool also comes with a precompiled nsenter binary, so that you don't have to install nsenter yourself. docker-bash works out-of-the-box!

First, install the tool on the Docker host:

curl --fail -L -O https://github.com/phusion/baseimage-docker/archive/master.tar.gz && \
tar xzf master.tar.gz && \
sudo ./baseimage-docker-master/install-tools.sh

Then run the tool as follows to login to a container:

docker-bash YOUR-CONTAINER-ID

You can lookup YOUR-CONTAINER-ID by running docker ps.

By default, docker-bash will open a Bash session. You can also tell it to run a command, and then exit:

docker-bash YOUR-CONTAINER-ID echo hello world

Login to the container, or running a command inside it, via SSH

You can use SSH to login to any container that is based on baseimage-docker. You can also use it to run a command inside a running container.

Here's how it compares to using nsenter to login to the container or to run a command inside it:

• Pros
  • Does not require a tool like nsenter to be available on the Docker host. Virtually everybody already has an SSH client installed.
  • There no surprises with processes behaving slightly differently than normal, as is the case when using nsenter.
  • Does not require root privileges on the Docker host.
  • Allows you to let users login to the container, without letting them login to the Docker host. However, this is not enabled by default because baseimage-docker does not expose the SSH server to the public Internet by default.
• Cons
  • Requires setting up SSH keys. However, baseimage-docker makes this easy for many cases through a pregenerated, insecure key. Read on to learn more.

The first thing that you need to do is to ensure that you have the right SSH keys installed inside the container. By default, no keys are installed, so you can't login. For convenience reasons, we provide a pregenerated, insecure key (PuTTY format) that you can easily enable. However, please be aware that using this key is for convenience only. It does not provide any security because this key (both the public and the private side) is publicly available. In production environments, you should use your own keys.

Using the insecure key for one container only

You can temporarily enable the insecure key for one container only. This means that the insecure key is installed at container boot. If you docker stop and docker start the container, the insecure key will still be there, but if you use docker run to start a new container then that container will not contain the insecure key.

Start a container with --enable-insecure-key:

docker run YOUR_IMAGE /sbin/my_init --enable-insecure-key

Find out the ID of the container that you just ran:

docker ps

Once you have the ID, look for its IP address with:

docker inspect -f "{{ .NetworkSettings.IPAddress }}" <ID>

Now that you have the IP address, you can use SSH to login to the container, or to execute a command inside it:

# Download the insecure private key
curl -o insecure_key -fSL https://github.com/phusion/baseimage-docker/raw/master/image/insecure_key
chmod 600 insecure_key

# Login to the container
ssh -i insecure_key root@<IP address>

# Running a command inside the container
ssh -i insecure_key root@<IP address> echo hello world

Enabling the insecure key permanently

It is also possible to enable the insecure key in the image permanently. This is not generally recommended, but it suitable for e.g. temporary development or demo environments where security does not matter.

Edit your Dockerfile to install the insecure key permanently:

RUN /usr/sbin/enable_insecure_key

Instructions for logging in the container is the same as in section Using the insecure key for one container only.

Using your own key

Edit your Dockerfile to install an SSH public key:

## Install an SSH of your choice.
ADD your_key.pub /tmp/your_key.pub
RUN cat /tmp/your_key.pub >> /root/.ssh/authorized_keys && rm -f /tmp/your_key.pub

Then rebuild your image. Once you have that, start a container based on that image:

docker run your-image-name

Find out the ID of the container that you just ran:

docker ps

Once you have the ID, look for its IP address with:

docker inspect -f "{{ .NetworkSettings.IPAddress }}" <ID>

Now that you have the IP address, you can use SSH to login to the container, or to execute a command inside it:

# Login to the container
ssh -i /path-to/your_key root@<IP address>

# Running a command inside the container
ssh -i /path-to/your_key root@<IP address> echo hello world

The docker-ssh tool

Looking up the IP of a container and running an SSH command quickly becomes tedious. Luckily, we provide the docker-ssh tool which automates this process. This tool is to be run on the Docker host, not inside a Docker container.

First, install the tool on the Docker host:

curl --fail -L -O https://github.com/phusion/baseimage-docker/archive/master.tar.gz && \
tar xzf master.tar.gz && \
sudo ./baseimage-docker-master/install-tools.sh

Then run the tool as follows to login to a container using SSH:

docker-ssh YOUR-CONTAINER-ID

You can lookup YOUR-CONTAINER-ID by running docker ps.

By default, docker-ssh will open a Bash session. You can also tell it to run a command, and then exit:

docker-ssh YOUR-CONTAINER-ID echo hello world

Building the image yourself

If for whatever reason you want to build the image yourself instead of downloading it from the Docker registry, follow these instructions.

Clone this repository:

git clone https://github.com/phusion/baseimage-docker.git
cd baseimage-docker

Start a virtual machine with Docker in it. You can use the Vagrantfile that we've already provided.

vagrant up
vagrant ssh
cd /vagrant

Build the image:

make build

If you want to call the resulting image something else, pass the NAME variable, like this:

make build NAME=joe/baseimage

Conclusion

• Using baseimage-docker? Tweet about us or follow us on Twitter.
• Having problems? Want to participate in development? Please post a message at the discussion forum.
• Looking for a more complete base image, one that is ideal for Ruby, Python, Node.js and Meteor web apps? Take a look at passenger-docker.

Please enjoy baseimage-docker, a product by Phusion. :-)