Make WINDOW_G configurable

This makes WINDOW_G a configurable value in the range of [2..24].
The upper limit of 24 is a defensive choice. The code is probably
correct for values up to 27 but those larger values yield in huge
tables (>= 256MiB), which are i) unlikely to be really beneficial
in practice and ii) increasingly difficult to test.

configure.ac

@@ -151,6 +151,15 @@ AC_ARG_WITH([scalar], [AS_HELP_STRING([--with-scalar=64bit|32bit|auto],
 AC_ARG_WITH([asm], [AS_HELP_STRING([--with-asm=x86_64|arm|no|auto]
 [Specify assembly optimizations to use. Default is auto (experimental: arm)])],[req_asm=$withval], [req_asm=auto])
 
+AC_ARG_WITH([ecmult-window], [AS_HELP_STRING([--with-ecmult-window=SIZE|auto],
+[window size for ecmult precomputation for verification, specified as integer in range [2..24].]
+[Larger values result in possibly better performance at the cost of an exponentially larger precomputed table.]
+[The table will store 2^(SIZE-2) * 64 bytes of data but can be larger in memory due to platform-specific padding and alignment.]
+[If the endomorphism optimization is enabled, two tables of this size are used instead of only one.]
+["auto" is a reasonable setting for desktop machines (currently 15). [default=auto]]
+)],
+[req_ecmult_window=$withval], [req_ecmult_window=auto])
+
 AC_CHECK_TYPES([__int128])
 
 if test x"$enable_coverage" = x"yes"; then
@@ -387,6 +396,28 @@ case $set_scalar in
   ;;
 esac
 
+#set ecmult window size
+if test x"$req_ecmult_window" = x"auto"; then
+  set_ecmult_window=15
+else
+  set_ecmult_window=$req_ecmult_window
+fi
+
+error_window_size=['window size for ecmult precomputation not an integer in range [2..24] or "auto"']
+case $set_ecmult_window in
+''|*[[!0-9]]*)
+  # no valid integer
+  AC_MSG_ERROR($error_window_size)
+  ;;
+*)
+  if test "$set_ecmult_window" -lt 2 -o "$set_ecmult_window" -gt 24 ; then
+    # not in range
+    AC_MSG_ERROR($error_window_size)
+  fi
+  AC_DEFINE_UNQUOTED(ECMULT_WINDOW_SIZE, $set_ecmult_window, [Set window size for ecmult precomputation])
+  ;;
+esac
+
 if test x"$use_tests" = x"yes"; then
   SECP_OPENSSL_CHECK
   if test x"$has_openssl_ec" = x"yes"; then
@@ -516,6 +547,7 @@ echo "  asm                 = $set_asm"
 echo "  bignum              = $set_bignum"
 echo "  field               = $set_field"
 echo "  scalar              = $set_scalar"
+echo "  ecmult window size  = $set_ecmult_window"
 echo
 echo "  CC                  = $CC"
 echo "  CFLAGS              = $CFLAGS"

src/basic-config.h

@@ -28,6 +28,7 @@
 #define USE_SCALAR_INV_BUILTIN 1
 #define USE_FIELD_10X26 1
 #define USE_SCALAR_8X32 1
+#define ECMULT_WINDOW_SIZE 15
 
 #endif /* USE_BASIC_CONFIG */
 

src/ecmult_impl.h

@@ -30,16 +30,32 @@
 #  endif
 #else
 /* optimal for 128-bit and 256-bit exponents. */
-#define WINDOW_A 5
-/** larger numbers may result in slightly better performance, at the cost of
-    exponentially larger precomputed tables. */
-#ifdef USE_ENDOMORPHISM
-/** Two tables for window size 15: 1.375 MiB. */
-#define WINDOW_G 15
-#else
-/** One table for window size 16: 1.375 MiB. */
-#define WINDOW_G 16
+#  define WINDOW_A 5
+/** Larger values for ECMULT_WINDOW_SIZE result in possibly better
+ *  performance at the cost of an exponentially larger precomputed
+ *  table. The exact table size is
+ *      (1 << (WINDOW_G - 2)) * sizeof(secp256k1_ge_storage)  bytes,
+ *  where sizeof(secp256k1_ge_storage) is typically 64 bytes but can
+ *  be larger due to platform-specific padding and alignment.
+ *  If the endomorphism optimization is enabled (USE_ENDOMORMPHSIM)
+ *  two tables of this size are used instead of only one.
+ */
+#  define WINDOW_G ECMULT_WINDOW_SIZE
 #endif
+
+/* Noone will ever need more than a window size of 24. The code might
+ * be correct for larger values of ECMULT_WINDOW_SIZE but this is not
+ * not tested.
+ *
+ * The following limitations are known, and there are probably more:
+ * If WINDOW_G > 27 and size_t has 32 bits, then the code is incorrect
+ * because the size of the memory object that we allocate (in bytes)
+ * will not fit in a size_t.
+ * If WINDOW_G > 31 and int has 32 bits, then the code is incorrect
+ * because certain expressions will overflow.
+ */
+#if ECMULT_WINDOW_SIZE < 2 || ECMULT_WINDOW_SIZE > 24
+#  error Set ECMULT_WINDOW_SIZE to an integer in range [2..24].
 #endif
 
 #ifdef USE_ENDOMORPHISM
@@ -311,7 +327,12 @@ static void secp256k1_ecmult_context_build(secp256k1_ecmult_context *ctx, const
     /* get the generator */
     secp256k1_gej_set_ge(&gj, &secp256k1_ge_const_g);
 
-    ctx->pre_g = (secp256k1_ge_storage (*)[])checked_malloc(cb, sizeof((*ctx->pre_g)[0]) * ECMULT_TABLE_SIZE(WINDOW_G));
+    {
+        size_t size = sizeof((*ctx->pre_g)[0]) * ((size_t)ECMULT_TABLE_SIZE(WINDOW_G));
+        /* check for overflow */
+        VERIFY_CHECK(size / sizeof((*ctx->pre_g)[0]) == ((size_t)ECMULT_TABLE_SIZE(WINDOW_G)));
+        ctx->pre_g = (secp256k1_ge_storage (*)[])checked_malloc(cb, size);
+    }
 
     /* precompute the tables with odd multiples */
     secp256k1_ecmult_odd_multiples_table_storage_var(ECMULT_TABLE_SIZE(WINDOW_G), *ctx->pre_g, &gj);
@@ -321,7 +342,10 @@ static void secp256k1_ecmult_context_build(secp256k1_ecmult_context *ctx, const
         secp256k1_gej g_128j;
         int i;
 
-        ctx->pre_g_128 = (secp256k1_ge_storage (*)[])checked_malloc(cb, sizeof((*ctx->pre_g_128)[0]) * ECMULT_TABLE_SIZE(WINDOW_G));
+        size_t size = sizeof((*ctx->pre_g_128)[0]) * ((size_t) ECMULT_TABLE_SIZE(WINDOW_G));
+        /* check for overflow */
+        VERIFY_CHECK(size / sizeof((*ctx->pre_g_128)[0]) == ((size_t)ECMULT_TABLE_SIZE(WINDOW_G)));
+        ctx->pre_g_128 = (secp256k1_ge_storage (*)[])checked_malloc(cb, size);
 
         /* calculate 2^128*generator */
         g_128j = gj;
@@ -338,15 +362,15 @@ static void secp256k1_ecmult_context_clone(secp256k1_ecmult_context *dst,
     if (src->pre_g == NULL) {
         dst->pre_g = NULL;
     } else {
-        size_t size = sizeof((*dst->pre_g)[0]) * ECMULT_TABLE_SIZE(WINDOW_G);
+        size_t size = sizeof((*dst->pre_g)[0]) * ((size_t)ECMULT_TABLE_SIZE(WINDOW_G));
         dst->pre_g = (secp256k1_ge_storage (*)[])checked_malloc(cb, size);
         memcpy(dst->pre_g, src->pre_g, size);
     }
 #ifdef USE_ENDOMORPHISM
     if (src->pre_g_128 == NULL) {
         dst->pre_g_128 = NULL;
     } else {
-        size_t size = sizeof((*dst->pre_g_128)[0]) * ECMULT_TABLE_SIZE(WINDOW_G);
+        size_t size = sizeof((*dst->pre_g_128)[0]) * ((size_t)ECMULT_TABLE_SIZE(WINDOW_G));
         dst->pre_g_128 = (secp256k1_ge_storage (*)[])checked_malloc(cb, size);
         memcpy(dst->pre_g_128, src->pre_g_128, size);
     }