drm: add new QXL driver. (v1.4)

QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.

The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.

The releases are freed from a workqueue that wakes up and processes the
release ring.

releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.

The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.

This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.

Authors: Dave Airlie, Alon Levy

v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
      don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.

Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drivers/gpu/drm/Kconfig

@@ -220,3 +220,5 @@ source "drivers/gpu/drm/tegra/Kconfig"
 source "drivers/gpu/drm/omapdrm/Kconfig"
 
 source "drivers/gpu/drm/tilcdc/Kconfig"
+
+source "drivers/gpu/drm/qxl/Kconfig"

drivers/gpu/drm/Makefile

@@ -52,4 +52,5 @@ obj-$(CONFIG_DRM_SHMOBILE) +=shmobile/
 obj-$(CONFIG_DRM_TEGRA) += tegra/
 obj-$(CONFIG_DRM_OMAP)	+= omapdrm/
 obj-$(CONFIG_DRM_TILCDC)	+= tilcdc/
+obj-$(CONFIG_DRM_QXL) += qxl/
 obj-y			+= i2c/

drivers/gpu/drm/qxl/Kconfig

@@ -0,0 +1,10 @@
+config DRM_QXL
+	tristate "QXL virtual GPU"
+	depends on DRM && PCI
+	select FB_SYS_FILLRECT
+	select FB_SYS_COPYAREA
+	select FB_SYS_IMAGEBLIT
+        select DRM_KMS_HELPER
+        select DRM_TTM
+	help
+		QXL virtual GPU for Spice virtualization desktop integration. Do not enable this driver unless your distro ships a corresponding X.org QXL driver that can handle kernel modesetting.

drivers/gpu/drm/qxl/Makefile

@@ -0,0 +1,9 @@
+#
+# Makefile for the drm device driver.  This driver provides support for the
+# Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher.
+
+ccflags-y := -Iinclude/drm
+
+qxl-y := qxl_drv.o qxl_kms.o qxl_display.o qxl_ttm.o qxl_fb.o qxl_object.o qxl_gem.o qxl_cmd.o qxl_image.o qxl_draw.o qxl_debugfs.o qxl_irq.o qxl_dumb.o qxl_ioctl.o qxl_fence.o qxl_release.o
+
+obj-$(CONFIG_DRM_QXL)+= qxl.o