Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/g…

…it/jejb/scsi

Pull SCSI fixes from James Bottomley:
 "The most important fix is the sg one because the regression it fixes
  (spurious warning and use after final put) is already backported to
  stable.

  The next biggest impact is the target fix for wrong credentials used
  to load a module because it's affecting new kernels installed on
  selinux based distributions.

  The other three fixes are an obvious off by one and SATA protocol
  issues"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: qla2xxx: Fix off by one in qla_edif_app_getstats()
  scsi: hisi_sas: Modify the deadline for ata_wait_after_reset()
  scsi: hisi_sas: Handle the NCQ error returned by D2H frame
  scsi: target: Fix SELinux error when systemd-modules loads the target module
  scsi: sg: Avoid race in error handling & drop bogus warn

drivers/scsi/hisi_sas/hisi_sas_main.c

@@ -1797,7 +1797,7 @@ static int hisi_sas_debug_I_T_nexus_reset(struct domain_device *device)
 	if (dev_is_sata(device)) {
 		struct ata_link *link = &device->sata_dev.ap->link;
 
-		rc = ata_wait_after_reset(link, HISI_SAS_WAIT_PHYUP_TIMEOUT,
+		rc = ata_wait_after_reset(link, jiffies + HISI_SAS_WAIT_PHYUP_TIMEOUT,
 					  smp_ata_check_ready_type);
 	} else {
 		msleep(2000);

drivers/scsi/hisi_sas/hisi_sas_v3_hw.c

@@ -2244,7 +2244,15 @@ slot_err_v3_hw(struct hisi_hba *hisi_hba, struct sas_task *task,
 	case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP:
 		if ((dw0 & CMPLT_HDR_RSPNS_XFRD_MSK) &&
 		    (sipc_rx_err_type & RX_FIS_STATUS_ERR_MSK)) {
-			ts->stat = SAS_PROTO_RESPONSE;
+			if (task->ata_task.use_ncq) {
+				struct domain_device *device = task->dev;
+				struct hisi_sas_device *sas_dev = device->lldd_dev;
+
+				sas_dev->dev_status = HISI_SAS_DEV_NCQ_ERR;
+				slot->abort = 1;
+			} else {
+				ts->stat = SAS_PROTO_RESPONSE;
+			}
 		} else if (dma_rx_err_type & RX_DATA_LEN_UNDERFLOW_MSK) {
 			ts->residual = trans_tx_fail_type;
 			ts->stat = SAS_DATA_UNDERRUN;

drivers/scsi/qla2xxx/qla_edif.c

@@ -1100,7 +1100,7 @@ qla_edif_app_getstats(scsi_qla_host_t *vha, struct bsg_job *bsg_job)
 
 		list_for_each_entry_safe(fcport, tf, &vha->vp_fcports, list) {
 			if (fcport->edif.enable) {
-				if (pcnt > app_req.num_ports)
+				if (pcnt >= app_req.num_ports)
 					break;
 
 				app_reply->elem[pcnt].rekey_count =

drivers/scsi/sg.c

@@ -285,6 +285,7 @@ sg_open(struct inode *inode, struct file *filp)
 	int dev = iminor(inode);
 	int flags = filp->f_flags;
 	struct request_queue *q;
+	struct scsi_device *device;
 	Sg_device *sdp;
 	Sg_fd *sfp;
 	int retval;
@@ -301,19 +302,20 @@ sg_open(struct inode *inode, struct file *filp)
 
 	/* This driver's module count bumped by fops_get in <linux/fs.h> */
 	/* Prevent the device driver from vanishing while we sleep */
-	retval = scsi_device_get(sdp->device);
+	device = sdp->device;
+	retval = scsi_device_get(device);
 	if (retval)
 		goto sg_put;
 
-	retval = scsi_autopm_get_device(sdp->device);
+	retval = scsi_autopm_get_device(device);
 	if (retval)
 		goto sdp_put;
 
 	/* scsi_block_when_processing_errors() may block so bypass
 	 * check if O_NONBLOCK. Permits SCSI commands to be issued
 	 * during error recovery. Tread carefully. */
 	if (!((flags & O_NONBLOCK) ||
-	      scsi_block_when_processing_errors(sdp->device))) {
+	      scsi_block_when_processing_errors(device))) {
 		retval = -ENXIO;
 		/* we are in error recovery for this device */
 		goto error_out;
@@ -344,7 +346,7 @@ sg_open(struct inode *inode, struct file *filp)
 
 	if (sdp->open_cnt < 1) {  /* no existing opens */
 		sdp->sgdebug = 0;
-		q = sdp->device->request_queue;
+		q = device->request_queue;
 		sdp->sg_tablesize = queue_max_segments(q);
 	}
 	sfp = sg_add_sfp(sdp);
@@ -370,10 +372,11 @@ sg_open(struct inode *inode, struct file *filp)
 error_mutex_locked:
 	mutex_unlock(&sdp->open_rel_lock);
 error_out:
-	scsi_autopm_put_device(sdp->device);
+	scsi_autopm_put_device(device);
 sdp_put:
-	scsi_device_put(sdp->device);
-	goto sg_put;
+	kref_put(&sdp->d_ref, sg_device_destroy);
+	scsi_device_put(device);
+	return retval;
 }
 
 /* Release resources associated with a successful sg_open()
@@ -2233,7 +2236,6 @@ sg_remove_sfp_usercontext(struct work_struct *work)
 			"sg_remove_sfp: sfp=0x%p\n", sfp));
 	kfree(sfp);
 
-	WARN_ON_ONCE(kref_read(&sdp->d_ref) != 1);
 	kref_put(&sdp->d_ref, sg_device_destroy);
 	scsi_device_put(device);
 	module_put(THIS_MODULE);

drivers/target/target_core_configfs.c

@@ -3672,6 +3672,8 @@ static int __init target_core_init_configfs(void)
 {
 	struct configfs_subsystem *subsys = &target_core_fabrics;
 	struct t10_alua_lu_gp *lu_gp;
+	struct cred *kern_cred;
+	const struct cred *old_cred;
 	int ret;
 
 	pr_debug("TARGET_CORE[0]: Loading Generic Kernel Storage"
@@ -3748,11 +3750,21 @@ static int __init target_core_init_configfs(void)
 	if (ret < 0)
 		goto out;
 
+	/* We use the kernel credentials to access the target directory */
+	kern_cred = prepare_kernel_cred(&init_task);
+	if (!kern_cred) {
+		ret = -ENOMEM;
+		goto out;
+	}
+	old_cred = override_creds(kern_cred);
 	target_init_dbroot();
+	revert_creds(old_cred);
+	put_cred(kern_cred);
 
 	return 0;
 
 out:
+	target_xcopy_release_pt();
 	configfs_unregister_subsystem(subsys);
 	core_dev_release_virtual_lun0();
 	rd_module_exit();