-
Notifications
You must be signed in to change notification settings - Fork 550
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
RISC-V: Add support for Xcvelw extension in CV32E40P. #8
Closed
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
The event load instruction `cv.elw` is only supported if the PULP_CLUSTER parameter is set to 1. The event load performs a load word and can cause the CV32E41P to enter a sleep state Spec: https://docs.openhwgroup.org/projects/cv32e40p-user-manual/en/latest/instruction_set_extensions.html#event-load-instruction Contributors: Nandni Jamnadas Pietra Ferreira Charley Keaney Mary Bennett Craig Blackmore Simon Cook Jeremy Bennett ChangeLog: * bfd/elfxx-riscv.c: Added `xcvelw` instruction class. * gas/doc/c-riscv.texi: Noted Xcvelw as an additional ISA extension for CORE-V. * opcodes/riscv-opc.c: * gas/testsuite/gas/riscv/cv-elw-fail.d: New test. * gas/testsuite/gas/riscv/cv-elw-fail.l: New test. * gas/testsuite/gas/riscv/cv-elw-fail.s: New test. * gas/testsuite/gas/riscv/cv-elw-march-fail.d: New test. * gas/testsuite/gas/riscv/cv-elw-march-fail.l: New test. * gas/testsuite/gas/riscv/cv-elw-march-fail.s: New test. * gas/testsuite/gas/riscv/cv-elw-pass.d: New test. * gas/testsuite/gas/riscv/cv-elw-pass.s: New test. include/ChangeLog: * opcode/riscv-opc.h: Added corresponding MATCH and MASK macros for Xcvelw. * opcode/riscv.h (enum riscv_insn_class): Added the Xcvelw instruction class. Signed-off-by: NandniJamnadas <nandni.jamnadas@embecosm.com>
antmak
pushed a commit
to espressif/binutils-gdb
that referenced
this pull request
Sep 12, 2023
New in this version: add a dedicated test. When I do this: $ ./gdb -nx --data-directory=data-directory -q \ /bin/sleep \ -ex "maint set target-non-stop on" \ -ex "tar ext :1234" \ -ex "set remote exec-file /bin/sleep" \ -ex "run 1231 &" \ -ex add-inferior \ -ex "inferior 2" Reading symbols from /bin/sleep... (No debugging symbols found in /bin/sleep) Remote debugging using :1234 Starting program: /bin/sleep 1231 Reading /lib64/ld-linux-x86-64.so.2 from remote target... warning: File transfers from remote targets can be slow. Use "set sysroot" to access files locally instead. Reading /lib64/ld-linux-x86-64.so.2 from remote target... Reading /usr/lib/debug/.build-id/a6/7a1408f18db3576757eea210d07ba3fc560dff.debug from remote target... [New inferior 2] Added inferior 2 on connection 1 (extended-remote :1234) [Switching to inferior 2 [<null>] (<noexec>)] (gdb) Reading /lib/x86_64-linux-gnu/libc.so.6 from remote target... attach 3659848 Attaching to process 3659848 /home/smarchi/src/binutils-gdb/gdb/thread.c:85: internal-error: inferior_thread: Assertion `current_thread_ != nullptr' failed. Note the "attach" command just above. When doing it on the command-line with a -ex switch, the bug doesn't trigger. The internal error of GDB is actually caused by GDBserver crashing, and the error recovery of GDB is not on point. This patch aims to fix just the GDBserver crash, not the GDB problem. GDBserver crashes with a segfault here: (gdb) bt #0 0x00005555557fb3f4 in find_one_thread (ptid=...) at /home/smarchi/src/binutils-gdb/gdbserver/thread-db.cc:177 #1 0x00005555557fd5cf in thread_db_thread_handle (ptid=<error reading variable: Cannot access memory at address 0xffffffffffffffa0>, handle=0x7fffffffc400, handle_len=0x7fffffffc3f0) at /home/smarchi/src/binutils-gdb/gdbserver/thread-db.cc:461 #2 0x000055555578a0b6 in linux_process_target::thread_handle (this=0x5555558a64c0 <the_x86_target>, ptid=<error reading variable: Cannot access memory at address 0xffffffffffffffa0>, handle=0x7fffffffc400, handle_len=0x7fffffffc3f0) at /home/smarchi/src/binutils-gdb/gdbserver/linux-low.cc:6905 #3 0x00005555556dfcc6 in handle_qxfer_threads_worker (thread=0x60b000000510, buffer=0x7fffffffc8a0) at /home/smarchi/src/binutils-gdb/gdbserver/server.cc:1645 bminor#4 0x00005555556e00e6 in operator() (__closure=0x7fffffffc5e0, thread=0x60b000000510) at /home/smarchi/src/binutils-gdb/gdbserver/server.cc:1696 bminor#5 0x00005555556f54be in for_each_thread<handle_qxfer_threads_proper(buffer*)::<lambda(thread_info*)> >(struct {...}) (func=...) at /home/smarchi/src/binutils-gdb/gdbserver/gdbthread.h:159 bminor#6 0x00005555556e0242 in handle_qxfer_threads_proper (buffer=0x7fffffffc8a0) at /home/smarchi/src/binutils-gdb/gdbserver/server.cc:1694 bminor#7 0x00005555556e04ba in handle_qxfer_threads (annex=0x629000000213 "", readbuf=0x621000019100 '\276' <repeats 200 times>..., writebuf=0x0, offset=0, len=4097) at /home/smarchi/src/binutils-gdb/gdbserver/server.cc:1732 bminor#8 0x00005555556e1989 in handle_qxfer (own_buf=0x629000000200 "qXfer:threads", packet_len=26, new_packet_len_p=0x7fffffffd630) at /home/smarchi/src/binutils-gdb/gdbserver/server.cc:2045 bminor#9 0x00005555556e720a in handle_query (own_buf=0x629000000200 "qXfer:threads", packet_len=26, new_packet_len_p=0x7fffffffd630) at /home/smarchi/src/binutils-gdb/gdbserver/server.cc:2685 bminor#10 0x00005555556f1a01 in process_serial_event () at /home/smarchi/src/binutils-gdb/gdbserver/server.cc:4176 bminor#11 0x00005555556f4457 in handle_serial_event (err=0, client_data=0x0) at /home/smarchi/src/binutils-gdb/gdbserver/server.cc:4514 bminor#12 0x0000555555820f56 in handle_file_event (file_ptr=0x607000000250, ready_mask=1) at /home/smarchi/src/binutils-gdb/gdbsupport/event-loop.cc:573 #13 0x0000555555821895 in gdb_wait_for_event (block=1) at /home/smarchi/src/binutils-gdb/gdbsupport/event-loop.cc:694 #14 0x000055555581f533 in gdb_do_one_event (mstimeout=-1) at /home/smarchi/src/binutils-gdb/gdbsupport/event-loop.cc:264 #15 0x00005555556ec9fb in start_event_loop () at /home/smarchi/src/binutils-gdb/gdbserver/server.cc:3512 #16 0x00005555556f0769 in captured_main (argc=4, argv=0x7fffffffe0d8) at /home/smarchi/src/binutils-gdb/gdbserver/server.cc:3992 #17 0x00005555556f0e3f in main (argc=4, argv=0x7fffffffe0d8) at /home/smarchi/src/binutils-gdb/gdbserver/server.cc:4078 The reason is a wrong current process when find_one_thread is called. The current process is the 2nd one, which was just attached. It does not yet have thread_db data (proc->priv->thread_db is nullptr). As we iterate on all threads of all process to fulfull the qxfer:threads:read request, we get to a thread of process 1 for which we haven't read thread_db information yet (lwp_info::thread_known is false), so we get into find_one_thread. find_one_thread uses `current_process ()->priv->thread_db`, assuming the current process matches the ptid passed as a parameter, which is wrong. A segfault happens when trying to dereference that thread_db pointer. Fix this by making find_one_thread not assume what the current process / current thread is. If it needs to call into libthread_db, which we know will try to read memory from the current process, then temporarily set the current process. In the case where the thread is already know and we return early, we don't need to switch process. Add a test to reproduce this specific situation. Change-Id: I09b00883e8b73b7e5f89d0f47cb4e9c0f3d6caaa Approved-By: Andrew Burgess <aburgess@redhat.com>
antmak
pushed a commit
to espressif/binutils-gdb
that referenced
this pull request
Sep 12, 2023
Bug gdb/29712 identifies a problem with the Python disassembler API. In some cases GDB will try to throw an exception through the libopcodes disassembler code, however, not all targets include exception unwind information when compiling C code, for targets that don't include this information GDB will terminate when trying to pass the exception through libopcodes. To explain what GDB is trying to do, consider the following trivial use of the Python disassembler API: class ExampleDisassembler(gdb.disassembler.Disassembler): class MyInfo(gdb.disassembler.DisassembleInfo): def __init__(self, info): super().__init__(info) def read_memory(self, length, offset): return super().read_memory(length, offset) def __init__(self): super().__init__("ExampleDisassembler") def __call__(self, info): info = self.MyInfo(info) return gdb.disassembler.builtin_disassemble(info) This disassembler doesn't add any value, it defers back to GDB to do all the actual work, but it serves to allow us to discuss the problem. The problem occurs when a Python exception is raised by the MyInfo.read_memory method. The MyInfo.read_memory method is called from the C++ function gdbpy_disassembler::read_memory_func. The C++ stack at the point this function is called looks like this: #0 gdbpy_disassembler::read_memory_func (memaddr=4198805, buff=0x7fff9ab9d2a8 "\220ӹ\232\377\177", len=1, info=0x7fff9ab9d558) at ../../src/gdb/python/py-disasm.c:510 #1 0x000000000104ba06 in fetch_data (info=0x7fff9ab9d558, addr=0x7fff9ab9d2a9 "ӹ\232\377\177") at ../../src/opcodes/i386-dis.c:305 #2 0x000000000104badb in ckprefix (ins=0x7fff9ab9d100) at ../../src/opcodes/i386-dis.c:8571 #3 0x000000000104e28e in print_insn (pc=4198805, info=0x7fff9ab9d558, intel_syntax=-1) at ../../src/opcodes/i386-dis.c:9548 bminor#4 0x000000000104f4d4 in print_insn_i386 (pc=4198805, info=0x7fff9ab9d558) at ../../src/opcodes/i386-dis.c:9949 bminor#5 0x00000000004fa7ea in default_print_insn (memaddr=4198805, info=0x7fff9ab9d558) at ../../src/gdb/arch-utils.c:1033 bminor#6 0x000000000094fe5e in i386_print_insn (pc=4198805, info=0x7fff9ab9d558) at ../../src/gdb/i386-tdep.c:4072 bminor#7 0x0000000000503d49 in gdbarch_print_insn (gdbarch=0x5335560, vma=4198805, info=0x7fff9ab9d558) at ../../src/gdb/gdbarch.c:3351 bminor#8 0x0000000000bcc8c6 in disasmpy_builtin_disassemble (self=0x7f2ab07f54d0, args=0x7f2ab0789790, kw=0x0) at ../../src/gdb/python/py-disasm.c:324 ### ... snip lots of frames as we pass through Python itself ... #22 0x0000000000bcd860 in gdbpy_print_insn (gdbarch=0x5335560, memaddr=0x401195, info=0x7fff9ab9e3c8) at ../../src/gdb/python/py-disasm.c:783 #23 0x00000000008995a5 in ext_lang_print_insn (gdbarch=0x5335560, address=0x401195, info=0x7fff9ab9e3c8) at ../../src/gdb/extension.c:939 #24 0x0000000000741aaa in gdb_print_insn_1 (gdbarch=0x5335560, vma=0x401195, info=0x7fff9ab9e3c8) at ../../src/gdb/disasm.c:1078 #25 0x0000000000741bab in gdb_disassembler::print_insn (this=0x7fff9ab9e3c0, memaddr=0x401195, branch_delay_insns=0x0) at ../../src/gdb/disasm.c:1101 So gdbpy_disassembler::read_memory_func is called from the libopcodes disassembler to read memory, this C++ function then calls into user supplied Python code to do the work. If the user supplied Python code raises an gdb.MemoryError exception indicating the memory read failed, this is fine. The C++ code converts this exception back into a return value that libopcodes can understand, and returns to libopcodes. However, if the user supplied Python code raises some other exception, what we want is for this exception to propagate through GDB and appear as if raised by the call to gdb.disassembler.builtin_disassemble. To achieve this, when gdbpy_disassembler::read_memory_func spots an unknown Python exception, we must pass the information about this exception from frame #0 to frame bminor#8 in the above backtrace. Frame bminor#8 is the C++ implementation of gdb.disassembler.builtin_disassemble, and so it is this function that we want to re-raise the unknown Python exception, so the user can, if they want, catch the exception in their code. The previous mechanism by which the exception was passed was to pack the details of the Python exception into a C++ exception, then throw the exception from frame #0, and catch the exception in frame bminor#8, unpack the details of the Python exception, and re-raise it. However, this relies on the exception passing through frames #1 to bminor#7, some of which are in libopcodes, which is C code, and so, might not be compiled with exception support. This commit proposes an alternative solution that does not rely on throwing a C++ exception. When we spot an unhandled Python exception in frame #0, we will store the details of this exception within the gdbpy_disassembler object currently in use. Then we return to libopcodes a value indicating that the memory_read failed. libopcodes will now continue to disassemble as though that memory read failed (with one special case described below), then, when we eventually return to disasmpy_builtin_disassemble we check to see if there is an exception stored in the gdbpy_disassembler object. If there is then this exception can immediately be installed, and then we return back to Python, when the user will be able to catch the exception. There is one extra change in gdbpy_disassembler::read_memory_func. After the first call that results in an exception being stored on the gdbpy_disassembler object, any future calls to the ::read_memory_func function will immediately return as if the read failed. This avoids any additional calls into user supplied Python code. My thinking here is that should the first call fail with some unknown error, GDB should not keep trying with any additional calls. This maintains the illusion that the exception raised from MyInfo.read_memory is immediately raised by gdb.disassembler.builtin_disassemble. I have no tests for this change though - to trigger this issue would rely on a libopcodes disassembler that will try to read further memory even after the first failed read. I'm not aware of any such disassembler that currently does this, but that doesn't mean such a disassembler couldn't exist in the future. With this change in place the gdb.python/py-disasm.exp test should now pass on AArch64. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29712 Approved-By: Simon Marchi <simon.marchi@efficios.com>
antmak
pushed a commit
to espressif/binutils-gdb
that referenced
this pull request
Sep 12, 2023
This commit changes the target_stack class from using a C style array of 'target_ops *' to using a C++ std::array<target_ops_ref, ...>. The benefit of this change is that some of the reference counting of target_ops objects is now done automatically. This commit fixes a crash in gdb.python/py-inferior.exp where GDB crashes at exit, leaving a core file behind. The crash occurs in connpy_connection_dealloc, and is actually triggered by this assert: gdb_assert (conn_obj->target == nullptr); Now a little aside... ... the assert is never actually printed, instead GDB crashes due to calling a pure virtual function. The backtrace at the point of crash looks like this: bminor#7 0x00007fef7e2cf747 in std::terminate() () from /lib64/libstdc++.so.6 bminor#8 0x00007fef7e2d0515 in __cxa_pure_virtual () from /lib64/libstdc++.so.6 bminor#9 0x0000000000de334d in target_stack::find_beneath (this=0x4934d78, t=0x2bda270 <the_dummy_target>) at ../../s> bminor#10 0x0000000000df4380 in inferior::find_target_beneath (this=0x4934b50, t=0x2bda270 <the_dummy_target>) at ../.> bminor#11 0x0000000000de2381 in target_ops::beneath (this=0x2bda270 <the_dummy_target>) at ../../src/gdb/target.c:3047 bminor#12 0x0000000000de68aa in target_ops::supports_terminal_ours (this=0x2bda270 <the_dummy_target>) at ../../src/gd> #13 0x0000000000dde6b9 in target_supports_terminal_ours () at ../../src/gdb/target.c:1112 #14 0x0000000000ee55f1 in internal_vproblem(internal_problem *, const char *, int, const char *, typedef __va_li> Notice in frame bminor#12 we called target_ops::supports_terminal_ours, however, this is the_dummy_target, which is of type dummy_target, and so we should have called dummy_target::supports_terminal_ours. I believe the reason we ended up in the wrong implementation of supports_terminal_ours (which is a virtual function) is because we made the call during GDB's shut-down, and, I suspect, the vtables were in a weird state. Anyway, the point of this patch is not to fix GDB's ability to print an assert during exit, but to address the root cause of the assert. With that aside out of the way, we can return to the main story... Connections are represented in Python with gdb.TargetConnection objects (or its sub-classes). The assert in question confirms that when a gdb.TargetConnection is deallocated, the underlying GDB connection has itself been removed from GDB. If this is not true then we risk creating multiple different gdb.TargetConnection objects for the same connection, which would be bad. To ensure that we have one gdb.TargetConnection object for each connection, the all_connection_objects map exists, this maps the process_stratum_target object (the connection) to the gdb.TargetConnection object that represents the connection. When a connection is removed in GDB the connection_removed observer fires, which we catch with connpy_connection_removed, this function then sets conn_obj->target to nullptr, and removes the corresponding entry from the all_connection_objects map. The first issue here is that connpy_connection_dealloc is being called as part of GDB's exit code, which is run after the Python interpreter has been shut down. The connpy_connection_dealloc function is used to deallocate the gdb.TargetConnection Python object. Surely it is wrong for us to be deallocating Python objects after the interpreter has been shut down. The reason why connpy_connection_dealloc is called during GDB's exit is that the global all_connection_objects map is still holding a reference to the gdb.TargetConnection object. When the map is destroyed during GDB's exit, the gdb.TargetConnection objects within the map can finally be deallocated. The reason why all_connection_objects has contents when GDB exits, and the reason the assert fires, is that, when GDB exits, there are still some connections that have not yet been removed from GDB, that is, they have a non-zero reference count. If we take a look at quit_force (top.c) you can see that, for each inferior, we call pop_all_targets before we (later in the function) call do_final_cleanups. It is the do_final_cleanups call that is responsible for shutting down the Python interpreter. The pop_all_targets calls should, in theory, cause all the connections to be removed from GDB. That this isn't working indicates that some targets have a non-zero reference count even after this final pop_all_targets call, and indeed, when I debug GDB, that is what I see. I tracked the problem down to delete_inferior where we do some house keeping, and then delete the inferior object, which calls inferior::~inferior. In neither delete_inferior or inferior::~inferior do we call pop_all_targets, and it is this missing call that means we leak some references to the target_ops objects on the inferior's target_stack. In this commit I will provide a partial fix for the problem. I say partial fix, but this will actually be enough to resolve the crash. In a later commit I will provide the final part of the fix. As mentioned at the start of the commit message, this commit changes the m_stack in target_stack to hold target_ops_ref objects. This means that when inferior::~inferior is called, and m_stack is released, we automatically decrement the target_ops reference count. With this change in place we no longer leak any references, and now, in quit_force the final pop_all_targets calls will release the final references. This means that the targets will be correctly closed at this point, which means the connections will be removed from GDB and the Python objects deallocated before the Python interpreter shuts down. There's a slight oddity in target_stack::unpush, where we std::move the reference out of m_stack like this: auto ref = std::move (m_stack[stratum]); the `ref' isn't used explicitly, but it serves to hold the target_ops_ref until the end of the scope while allowing the m_stack entry to be reset back to nullptr. The alternative would be to directly set the m_stack entry to nullptr, like this: m_stack[stratum] = nullptr; The problem here is that when we set the m_stack entry to nullptr we first decrement the target_ops reference count, and then set the array entry to nullptr. If the decrement means that the target_ops object reaches a zero reference count then the target_ops object will be closed by calling target_close. In target_close we ensure that the target being closed is not in any inferiors target_stack. As we decrement before clearing, then this check in target_close will fail, and an assert will trigger. By using std::move to move the reference out of m_stack, this clears the m_stack entry, meaning the inferior no longer contains the target_ops in its target_stack. Now when the REF object goes out of scope and the reference count is decremented, target_close can run successfully. I've made use of the Python connection_removed listener API to add a test for this issue. The test installs a listener and then causes delete_inferior to be called, we can then see that the connection is then correctly removed (because the listener triggers).
fincs
pushed a commit
to devkitPro/binutils-gdb
that referenced
this pull request
Sep 17, 2023
With gdb build with -fsanitize=thread and test-case gdb.base/index-cache.exp I run into: ... (gdb) file build/gdb/testsuite/outputs/gdb.base/index-cache/index-cache Reading symbols from build/gdb/testsuite/outputs/gdb.base/index-cache/index-cache... (gdb) show index-cache enabled The index cache is off. (gdb) PASS: gdb.base/index-cache.exp: test_basic_stuff: index-cache is disabled by default set index-cache enabled on ================== WARNING: ThreadSanitizer: data race (pid=32248) Write of size 1 at 0x00000321f540 by main thread: #0 index_cache::enable() gdb/dwarf2/index-cache.c:76 (gdb+0x82cfdd) #1 set_index_cache_enabled_command gdb/dwarf2/index-cache.c:270 (gdb+0x82d9af) #2 bool setting::set<bool>(bool const&) gdb/command.h:353 (gdb+0x6fe5f2) bminor#3 do_set_command(char const*, int, cmd_list_element*) gdb/cli/cli-setshow.c:414 (gdb+0x6fcd21) bminor#4 execute_command(char const*, int) gdb/top.c:567 (gdb+0xff2e64) bminor#5 command_handler(char const*) gdb/event-top.c:552 (gdb+0x94acc0) bminor#6 command_line_handler(std::unique_ptr<char, gdb::xfree_deleter<char> >&&) gdb/event-top.c:788 (gdb+0x94b37d) bminor#7 tui_command_line_handler gdb/tui/tui-interp.c:104 (gdb+0x103467e) bminor#8 gdb_rl_callback_handler gdb/event-top.c:259 (gdb+0x94a265) bminor#9 rl_callback_read_char readline/readline/callback.c:290 (gdb+0x11bdd3f) bminor#10 gdb_rl_callback_read_char_wrapper_noexcept gdb/event-top.c:195 (gdb+0x94a064) bminor#11 gdb_rl_callback_read_char_wrapper gdb/event-top.c:234 (gdb+0x94a125) bminor#12 stdin_event_handler gdb/ui.c:155 (gdb+0x1074922) #13 handle_file_event gdbsupport/event-loop.cc:573 (gdb+0x1d94de4) #14 gdb_wait_for_event gdbsupport/event-loop.cc:694 (gdb+0x1d9551c) #15 gdb_do_one_event(int) gdbsupport/event-loop.cc:264 (gdb+0x1d93908) #16 start_event_loop gdb/main.c:412 (gdb+0xb5a256) #17 captured_command_loop gdb/main.c:476 (gdb+0xb5a445) #18 captured_main gdb/main.c:1320 (gdb+0xb5c5c5) #19 gdb_main(captured_main_args*) gdb/main.c:1339 (gdb+0xb5c674) #20 main gdb/gdb.c:32 (gdb+0x416776) Previous read of size 1 at 0x00000321f540 by thread T12: #0 index_cache::enabled() const gdb/dwarf2/index-cache.h:48 (gdb+0x82e1a6) #1 index_cache::store(dwarf2_per_bfd*) gdb/dwarf2/index-cache.c:94 (gdb+0x82d0bc) #2 cooked_index::maybe_write_index(dwarf2_per_bfd*) gdb/dwarf2/cooked-index.c:638 (gdb+0x7f1b97) bminor#3 operator() gdb/dwarf2/cooked-index.c:468 (gdb+0x7f0f24) bminor#4 _M_invoke /usr/include/c++/7/bits/std_function.h:316 (gdb+0x7f285b) bminor#5 std::function<void ()>::operator()() const /usr/include/c++/7/bits/std_function.h:706 (gdb+0x700952) bminor#6 void std::__invoke_impl<void, std::function<void ()>&>(std::__invoke_other, std::function<void ()>&) /usr/include/c++/7/bits/invoke.h:60 (gdb+0x7381a0) bminor#7 std::__invoke_result<std::function<void ()>&>::type std::__invoke<std::function<void ()>&>(std::function<void ()>&) /usr/include/c++/7/bits/invoke.h:95 (gdb+0x737e91) bminor#8 std::__future_base::_Task_state<std::function<void ()>, std::allocator<int>, void ()>::_M_run()::{lambda()#1}::operator()() const /usr/include/c++/7/future:1421 (gdb+0x737b59) bminor#9 std::__future_base::_Task_setter<std::unique_ptr<std::__future_base::_Result<void>, std::__future_base::_Result_base::_Deleter>, std::__future_base::_Task_state<std::function<void ()>, std::allocator<int>, void ()>::_M_run()::{lambda()#1}, void>::operator()() const /usr/include/c++/7/future:1362 (gdb+0x738660) bminor#10 std::_Function_handler<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> (), std::__future_base::_Task_setter<std::unique_ptr<std::__future_base::_Result<void>, std::__future_base::_Result_base::_Deleter>, std::__future_base::_Task_state<std::function<void ()>, std::allocator<int>, void ()>::_M_run()::{lambda()#1}, void> >::_M_invoke(std::_Any_data const&) /usr/include/c++/7/bits/std_function.h:302 (gdb+0x73825c) bminor#11 std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>::operator()() const /usr/include/c++/7/bits/std_function.h:706 (gdb+0x733623) bminor#12 std::__future_base::_State_baseV2::_M_do_set(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*) /usr/include/c++/7/future:561 (gdb+0x732bdf) #13 void std::__invoke_impl<void, void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*>(std::__invoke_memfun_deref, void (std::__future_base::_State_baseV2::*&&)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*&&, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*&&, bool*&&) /usr/include/c++/7/bits/invoke.h:73 (gdb+0x734c4f) #14 std::__invoke_result<void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*>::type std::__invoke<void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*>(void (std::__future_base::_State_baseV2::*&&)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*&&, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*&&, bool*&&) /usr/include/c++/7/bits/invoke.h:95 (gdb+0x733bc5) #15 std::call_once<void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*>(std::once_flag&, void (std::__future_base::_State_baseV2::*&&)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*&&, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*&&, bool*&&)::{lambda()#1}::operator()() const /usr/include/c++/7/mutex:672 (gdb+0x73300d) #16 std::call_once<void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*>(std::once_flag&, void (std::__future_base::_State_baseV2::*&&)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*&&, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*&&, bool*&&)::{lambda()#2}::operator()() const /usr/include/c++/7/mutex:677 (gdb+0x7330b2) #17 std::call_once<void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*>(std::once_flag&, void (std::__future_base::_State_baseV2::*&&)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*&&, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*&&, bool*&&)::{lambda()#2}::_FUN() /usr/include/c++/7/mutex:677 (gdb+0x7330f2) #18 pthread_once <null> (libtsan.so.0+0x4457c) #19 __gthread_once /usr/include/c++/7/x86_64-suse-linux/bits/gthr-default.h:699 (gdb+0x72f5dd) #20 void std::call_once<void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*>(std::once_flag&, void (std::__future_base::_State_baseV2::*&&)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*&&, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*&&, bool*&&) /usr/include/c++/7/mutex:684 (gdb+0x733224) #21 std::__future_base::_State_baseV2::_M_set_result(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>, bool) /usr/include/c++/7/future:401 (gdb+0x732852) #22 std::__future_base::_Task_state<std::function<void ()>, std::allocator<int>, void ()>::_M_run() /usr/include/c++/7/future:1423 (gdb+0x737bef) #23 std::packaged_task<void ()>::operator()() /usr/include/c++/7/future:1556 (gdb+0x1dac492) #24 gdb::thread_pool::thread_function() gdbsupport/thread-pool.cc:242 (gdb+0x1dabdb4) #25 void std::__invoke_impl<void, void (gdb::thread_pool::*)(), gdb::thread_pool*>(std::__invoke_memfun_deref, void (gdb::thread_pool::*&&)(), gdb::thread_pool*&&) /usr/include/c++/7/bits/invoke.h:73 (gdb+0x1dace63) #26 std::__invoke_result<void (gdb::thread_pool::*)(), gdb::thread_pool*>::type std::__invoke<void (gdb::thread_pool::*)(), gdb::thread_pool*>(void (gdb::thread_pool::*&&)(), gdb::thread_pool*&&) /usr/include/c++/7/bits/invoke.h:95 (gdb+0x1dac294) #27 decltype (__invoke((_S_declval<0ul>)(), (_S_declval<1ul>)())) std::thread::_Invoker<std::tuple<void (gdb::thread_pool::*)(), gdb::thread_pool*> >::_M_invoke<0ul, 1ul>(std::_Index_tuple<0ul, 1ul>) /usr/include/c++/7/thread:234 (gdb+0x1daf5c6) #28 std::thread::_Invoker<std::tuple<void (gdb::thread_pool::*)(), gdb::thread_pool*> >::operator()() /usr/include/c++/7/thread:243 (gdb+0x1daf551) #29 std::thread::_State_impl<std::thread::_Invoker<std::tuple<void (gdb::thread_pool::*)(), gdb::thread_pool*> > >::_M_run() /usr/include/c++/7/thread:186 (gdb+0x1daf506) #30 <null> <null> (libstdc++.so.6+0xdcac2) Location is global 'global_index_cache' of size 48 at 0x00000321f520 (gdb+0x00000321f540) ... SUMMARY: ThreadSanitizer: data race gdb/dwarf2/index-cache.c:76 in index_cache::enable() ... The race happens when issuing a "file $exec" command followed by a "set index-cache enabled on" command. The race is between: - a worker thread reading index_cache::m_enabled to determine whether an index-cache entry for $exec needs to be written (due to command "file $exec"), and - the main thread setting index_cache::m_enabled (due to command "set index-cache enabled on"). Fix this by capturing the value of index_cache::m_enabled in the main thread, and using the captured value in the worker thread. Tested on x86_64-linux. PR symtab/30392 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30392
fincs
pushed a commit
to devkitPro/binutils-gdb
that referenced
this pull request
Sep 17, 2023
With gdb build with -fsanitize=thread and test-case gdb.base/index-cache.exp I run into: ... (gdb) file build/gdb/testsuite/outputs/gdb.base/index-cache/index-cache Reading symbols from build/gdb/testsuite/outputs/gdb.base/index-cache/index-cache... ================== WARNING: ThreadSanitizer: data race (pid=12261) Write of size 4 at 0x7b4400097d08 by main thread: #0 bfd_open_file bfd/cache.c:584 (gdb+0x148bb92) #1 bfd_cache_lookup_worker bfd/cache.c:261 (gdb+0x148b12a) #2 cache_bseek bfd/cache.c:289 (gdb+0x148b324) bminor#3 bfd_seek bfd/bfdio.c:459 (gdb+0x1489c31) bminor#4 _bfd_generic_get_section_contents bfd/libbfd.c:1069 (gdb+0x14977a4) bminor#5 bfd_get_section_contents bfd/section.c:1606 (gdb+0x149cc7c) bminor#6 gdb_bfd_scan_elf_dyntag(int, bfd*, unsigned long*, unsigned long*) gdb/solib.c:1601 (gdb+0xed8eca) bminor#7 elf_locate_base gdb/solib-svr4.c:705 (gdb+0xec28ac) bminor#8 svr4_iterate_over_objfiles_in_search_order gdb/solib-svr4.c:3430 (gdb+0xeca55d) bminor#9 gdbarch_iterate_over_objfiles_in_search_order(gdbarch*, gdb::function_view<bool (objfile*)>, objfile*) gdb/gdbarch.c:5041 (gdb+0x537cad) bminor#10 find_main_name gdb/symtab.c:6270 (gdb+0xf743a5) bminor#11 main_language() gdb/symtab.c:6313 (gdb+0xf74499) bminor#12 set_initial_language() gdb/symfile.c:1700 (gdb+0xf4285c) #13 symbol_file_add_main_1 gdb/symfile.c:1212 (gdb+0xf40e2a) #14 symbol_file_command(char const*, int) gdb/symfile.c:1681 (gdb+0xf427d1) #15 file_command gdb/exec.c:554 (gdb+0x94f74b) #16 do_simple_func gdb/cli/cli-decode.c:95 (gdb+0x6d9528) #17 cmd_func(cmd_list_element*, char const*, int) gdb/cli/cli-decode.c:2735 (gdb+0x6e0f69) #18 execute_command(char const*, int) gdb/top.c:575 (gdb+0xff303c) #19 command_handler(char const*) gdb/event-top.c:552 (gdb+0x94adde) #20 command_line_handler(std::unique_ptr<char, gdb::xfree_deleter<char> >&&) gdb/event-top.c:788 (gdb+0x94b49b) #21 tui_command_line_handler gdb/tui/tui-interp.c:104 (gdb+0x103479c) #22 gdb_rl_callback_handler gdb/event-top.c:259 (gdb+0x94a383) #23 rl_callback_read_char readline/readline/callback.c:290 (gdb+0x11bde5d) #24 gdb_rl_callback_read_char_wrapper_noexcept gdb/event-top.c:195 (gdb+0x94a182) #25 gdb_rl_callback_read_char_wrapper gdb/event-top.c:234 (gdb+0x94a243) #26 stdin_event_handler gdb/ui.c:155 (gdb+0x1074a40) #27 handle_file_event gdbsupport/event-loop.cc:573 (gdb+0x1d94f02) #28 gdb_wait_for_event gdbsupport/event-loop.cc:694 (gdb+0x1d9563a) #29 gdb_do_one_event(int) gdbsupport/event-loop.cc:264 (gdb+0x1d93a26) #30 start_event_loop gdb/main.c:412 (gdb+0xb5a374) #31 captured_command_loop gdb/main.c:476 (gdb+0xb5a563) #32 captured_main gdb/main.c:1320 (gdb+0xb5c6e3) #33 gdb_main(captured_main_args*) gdb/main.c:1339 (gdb+0xb5c792) #34 main gdb/gdb.c:32 (gdb+0x416776) Previous read of size 1 at 0x7b4400097d08 by thread T12: #0 bfd_check_format_matches bfd/format.c:323 (gdb+0x1492db4) #1 bfd_check_format bfd/format.c:94 (gdb+0x1492104) #2 build_id_bfd_get(bfd*) gdb/build-id.c:42 (gdb+0x6648f7) bminor#3 index_cache::store(dwarf2_per_bfd*, index_cache_store_context*) gdb/dwarf2/index-cache.c:110 (gdb+0x82d205) bminor#4 cooked_index::maybe_write_index(dwarf2_per_bfd*) gdb/dwarf2/cooked-index.c:640 (gdb+0x7f1bf1) bminor#5 operator() gdb/dwarf2/cooked-index.c:470 (gdb+0x7f0f40) bminor#6 _M_invoke /usr/include/c++/7/bits/std_function.h:316 (gdb+0x7f28f7) bminor#7 std::function<void ()>::operator()() const /usr/include/c++/7/bits/std_function.h:706 (gdb+0x700952) bminor#8 void std::__invoke_impl<void, std::function<void ()>&>(std::__invoke_other, std::function<void ()>&) /usr/include/c++/7/bits/invoke.h:60 (gdb+0x7381a0) bminor#9 std::__invoke_result<std::function<void ()>&>::type std::__invoke<std::function<void ()>&>(std::function<void ()>&) /usr/include/c++/7/bits/invoke.h:95 (gdb+0x737e91) bminor#10 std::__future_base::_Task_state<std::function<void ()>, std::allocator<int>, void ()>::_M_run()::{lambda()#1}::operator()() const /usr/include/c++/7/future:1421 (gdb+0x737b59) bminor#11 std::__future_base::_Task_setter<std::unique_ptr<std::__future_base::_Result<void>, std::__future_base::_Result_base::_Deleter>, std::__future_base::_Task_state<std::function<void ()>, std::allocator<int>, void ()>::_M_run()::{lambda()#1}, void>::operator()() const /usr/include/c++/7/future:1362 (gdb+0x738660) bminor#12 std::_Function_handler<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> (), std::__future_base::_Task_setter<std::unique_ptr<std::__future_base::_Result<void>, std::__future_base::_Result_base::_Deleter>, std::__future_base::_Task_state<std::function<void ()>, std::allocator<int>, void ()>::_M_run()::{lambda()#1}, void> >::_M_invoke(std::_Any_data const&) /usr/include/c++/7/bits/std_function.h:302 (gdb+0x73825c) #13 std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>::operator()() const /usr/include/c++/7/bits/std_function.h:706 (gdb+0x733623) #14 std::__future_base::_State_baseV2::_M_do_set(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*) /usr/include/c++/7/future:561 (gdb+0x732bdf) #15 void std::__invoke_impl<void, void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*>(std::__invoke_memfun_deref, void (std::__future_base::_State_baseV2::*&&)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*&&, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*&&, bool*&&) /usr/include/c++/7/bits/invoke.h:73 (gdb+0x734c4f) #16 std::__invoke_result<void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*>::type std::__invoke<void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*>(void (std::__future_base::_State_baseV2::*&&)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*&&, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*&&, bool*&&) /usr/include/c++/7/bits/invoke.h:95 (gdb+0x733bc5) #17 std::call_once<void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*>(std::once_flag&, void (std::__future_base::_State_baseV2::*&&)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*&&, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*&&, bool*&&)::{lambda()#1}::operator()() const /usr/include/c++/7/mutex:672 (gdb+0x73300d) #18 std::call_once<void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*>(std::once_flag&, void (std::__future_base::_State_baseV2::*&&)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*&&, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*&&, bool*&&)::{lambda()#2}::operator()() const /usr/include/c++/7/mutex:677 (gdb+0x7330b2) #19 std::call_once<void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*>(std::once_flag&, void (std::__future_base::_State_baseV2::*&&)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*&&, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*&&, bool*&&)::{lambda()#2}::_FUN() /usr/include/c++/7/mutex:677 (gdb+0x7330f2) #20 pthread_once <null> (libtsan.so.0+0x4457c) #21 __gthread_once /usr/include/c++/7/x86_64-suse-linux/bits/gthr-default.h:699 (gdb+0x72f5dd) #22 void std::call_once<void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*>(std::once_flag&, void (std::__future_base::_State_baseV2::*&&)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*&&, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*&&, bool*&&) /usr/include/c++/7/mutex:684 (gdb+0x733224) #23 std::__future_base::_State_baseV2::_M_set_result(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>, bool) /usr/include/c++/7/future:401 (gdb+0x732852) #24 std::__future_base::_Task_state<std::function<void ()>, std::allocator<int>, void ()>::_M_run() /usr/include/c++/7/future:1423 (gdb+0x737bef) #25 std::packaged_task<void ()>::operator()() /usr/include/c++/7/future:1556 (gdb+0x1dac5b0) #26 gdb::thread_pool::thread_function() gdbsupport/thread-pool.cc:242 (gdb+0x1dabed2) #27 void std::__invoke_impl<void, void (gdb::thread_pool::*)(), gdb::thread_pool*>(std::__invoke_memfun_deref, void (gdb::thread_pool::*&&)(), gdb::thread_pool*&&) /usr/include/c++/7/bits/invoke.h:73 (gdb+0x1dacf81) #28 std::__invoke_result<void (gdb::thread_pool::*)(), gdb::thread_pool*>::type std::__invoke<void (gdb::thread_pool::*)(), gdb::thread_pool*>(void (gdb::thread_pool::*&&)(), gdb::thread_pool*&&) /usr/include/c++/7/bits/invoke.h:95 (gdb+0x1dac3b2) #29 decltype (__invoke((_S_declval<0ul>)(), (_S_declval<1ul>)())) std::thread::_Invoker<std::tuple<void (gdb::thread_pool::*)(), gdb::thread_pool*> >::_M_invoke<0ul, 1ul>(std::_Index_tuple<0ul, 1ul>) /usr/include/c++/7/thread:234 (gdb+0x1daf6e4) #30 std::thread::_Invoker<std::tuple<void (gdb::thread_pool::*)(), gdb::thread_pool*> >::operator()() /usr/include/c++/7/thread:243 (gdb+0x1daf66f) #31 std::thread::_State_impl<std::thread::_Invoker<std::tuple<void (gdb::thread_pool::*)(), gdb::thread_pool*> > >::_M_run() /usr/include/c++/7/thread:186 (gdb+0x1daf624) #32 <null> <null> (libstdc++.so.6+0xdcac2) ... SUMMARY: ThreadSanitizer: data race bfd/cache.c:584 in bfd_open_file ... The race happens when issuing the "file $exec" command. The race is between: - a worker thread getting the build id while writing the index cache, and in the process reading bfd::format, and - the main thread calling find_main_name, and in the process setting bfd::cacheable. The two bitfields bfd::cacheable and bfd::format share the same bitfield container. Fix this by capturing the build id in the main thread, and using the captured value in the worker thread. Likewise for the dwz build id, which likely suffers from the same issue. While we're at it, also move the creation of the cache directory to the index_cache_store_context constructor, to: - make sure there's no race between subsequent file commands, and - issue any related warning or error messages during the file command. Tested on x86_64-linux. Approved-By: Tom Tromey <tom@tromey.com> PR symtab/30392 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30392
fincs
pushed a commit
to devkitPro/binutils-gdb
that referenced
this pull request
Sep 17, 2023
With gdb build with -fsanitize=thread and test-case gdb.base/index-cache.exp I run into: ... (gdb) file build/gdb/testsuite/outputs/gdb.base/index-cache/index-cache Reading symbols from build/gdb/testsuite/outputs/gdb.base/index-cache/index-cache... ================== WARNING: ThreadSanitizer: data race (pid=24296) Write of size 1 at 0x7b200000420d by main thread: #0 queue_comp_unit gdb/dwarf2/read.c:5564 (gdb+0x8939ce) #1 dw2_do_instantiate_symtab gdb/dwarf2/read.c:1754 (gdb+0x885b96) #2 dw2_instantiate_symtab gdb/dwarf2/read.c:1792 (gdb+0x885d86) bminor#3 dw2_expand_symtabs_matching_one(dwarf2_per_cu_data*, dwarf2_per_objfile*, gdb::function_view<bool (char const*, bool)>, gdb::function_view<bool (compunit_symtab*)>) gdb/dwarf2/read.c:3042 (gdb+0x88ac77) bminor#4 cooked_index_functions::expand_symtabs_matching(objfile*, gdb::function_view<bool (char const*, bool)>, lookup_name_info const*, gdb::function_view<bool (char const*)>, gdb::function_view<bool (compunit_symtab*)>, enum_flags<block_search_flag_values>, domain_enum, search_domain) gdb/dwarf2/read.c:16915 (gdb+0x8c1c8a) bminor#5 objfile::lookup_symbol(block_enum, char const*, domain_enum) gdb/symfile-debug.c:288 (gdb+0xf389a1) bminor#6 lookup_symbol_via_quick_fns gdb/symtab.c:2385 (gdb+0xf66403) bminor#7 lookup_symbol_in_objfile gdb/symtab.c:2516 (gdb+0xf66a67) bminor#8 operator() gdb/symtab.c:2562 (gdb+0xf66bbe) bminor#9 operator() gdb/../gdbsupport/function-view.h:305 (gdb+0xf76ffd) bminor#10 _FUN gdb/../gdbsupport/function-view.h:299 (gdb+0xf77054) bminor#11 gdb::function_view<bool (objfile*)>::operator()(objfile*) const gdb/../gdbsupport/function-view.h:289 (gdb+0xc3f5e3) bminor#12 svr4_iterate_over_objfiles_in_search_order gdb/solib-svr4.c:3455 (gdb+0xeca793) #13 gdbarch_iterate_over_objfiles_in_search_order(gdbarch*, gdb::function_view<bool (objfile*)>, objfile*) gdb/gdbarch.c:5041 (gdb+0x537cad) #14 lookup_global_or_static_symbol gdb/symtab.c:2559 (gdb+0xf66e47) #15 lookup_global_symbol(char const*, block const*, domain_enum) gdb/symtab.c:2615 (gdb+0xf670cc) #16 language_defn::lookup_symbol_nonlocal(char const*, block const*, domain_enum) const gdb/symtab.c:2447 (gdb+0xf666ba) #17 lookup_symbol_aux gdb/symtab.c:2123 (gdb+0xf655ff) #18 lookup_symbol_in_language(char const*, block const*, domain_enum, language, field_of_this_result*) gdb/symtab.c:1931 (gdb+0xf646f7) #19 set_initial_language() gdb/symfile.c:1708 (gdb+0xf429c0) #20 symbol_file_add_main_1 gdb/symfile.c:1212 (gdb+0xf40f54) #21 symbol_file_command(char const*, int) gdb/symfile.c:1681 (gdb+0xf428fb) #22 file_command gdb/exec.c:554 (gdb+0x94f875) #23 do_simple_func gdb/cli/cli-decode.c:95 (gdb+0x6d9528) #24 cmd_func(cmd_list_element*, char const*, int) gdb/cli/cli-decode.c:2735 (gdb+0x6e0f69) #25 execute_command(char const*, int) gdb/top.c:575 (gdb+0xff3166) #26 command_handler(char const*) gdb/event-top.c:552 (gdb+0x94af08) #27 command_line_handler(std::unique_ptr<char, gdb::xfree_deleter<char> >&&) gdb/event-top.c:788 (gdb+0x94b5c5) #28 tui_command_line_handler gdb/tui/tui-interp.c:104 (gdb+0x10348c6) #29 gdb_rl_callback_handler gdb/event-top.c:259 (gdb+0x94a4ad) #30 rl_callback_read_char readline/readline/callback.c:290 (gdb+0x11bdf87) #31 gdb_rl_callback_read_char_wrapper_noexcept gdb/event-top.c:195 (gdb+0x94a2ac) #32 gdb_rl_callback_read_char_wrapper gdb/event-top.c:234 (gdb+0x94a36d) #33 stdin_event_handler gdb/ui.c:155 (gdb+0x1074b6a) #34 handle_file_event gdbsupport/event-loop.cc:573 (gdb+0x1d9502c) #35 gdb_wait_for_event gdbsupport/event-loop.cc:694 (gdb+0x1d95764) #36 gdb_do_one_event(int) gdbsupport/event-loop.cc:264 (gdb+0x1d93b50) #37 start_event_loop gdb/main.c:412 (gdb+0xb5a49e) #38 captured_command_loop gdb/main.c:476 (gdb+0xb5a68d) #39 captured_main gdb/main.c:1320 (gdb+0xb5c80d) #40 gdb_main(captured_main_args*) gdb/main.c:1339 (gdb+0xb5c8bc) #41 main gdb/gdb.c:32 (gdb+0x416776) Previous read of size 1 at 0x7b200000420d by thread T12: #0 write_gdbindex gdb/dwarf2/index-write.c:1229 (gdb+0x8310c8) #1 write_dwarf_index(dwarf2_per_bfd*, char const*, char const*, char const*, dw_index_kind) gdb/dwarf2/index-write.c:1484 (gdb+0x83232f) #2 index_cache::store(dwarf2_per_bfd*, index_cache_store_context*) gdb/dwarf2/index-cache.c:177 (gdb+0x82d62b) bminor#3 cooked_index::maybe_write_index(dwarf2_per_bfd*) gdb/dwarf2/cooked-index.c:640 (gdb+0x7f1bf7) bminor#4 operator() gdb/dwarf2/cooked-index.c:470 (gdb+0x7f0f40) bminor#5 _M_invoke /usr/include/c++/7/bits/std_function.h:316 (gdb+0x7f2909) bminor#6 std::function<void ()>::operator()() const /usr/include/c++/7/bits/std_function.h:706 (gdb+0x700952) bminor#7 void std::__invoke_impl<void, std::function<void ()>&>(std::__invoke_other, std::function<void ()>&) /usr/include/c++/7/bits/invoke.h:60 (gdb+0x7381a0) bminor#8 std::__invoke_result<std::function<void ()>&>::type std::__invoke<std::function<void ()>&>(std::function<void ()>&) /usr/include/c++/7/bits/invoke.h:95 (gdb+0x737e91) bminor#9 std::__future_base::_Task_state<std::function<void ()>, std::allocator<int>, void ()>::_M_run()::{lambda()#1}::operator()() const /usr/include/c++/7/future:1421 (gdb+0x737b59) bminor#10 std::__future_base::_Task_setter<std::unique_ptr<std::__future_base::_Result<void>, std::__future_base::_Result_base::_Deleter>, std::__future_base::_Task_state<std::function<void ()>, std::allocator<int>, void ()>::_M_run()::{lambda()#1}, void>::operator()() const /usr/include/c++/7/future:1362 (gdb+0x738660) bminor#11 std::_Function_handler<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> (), std::__future_base::_Task_setter<std::unique_ptr<std::__future_base::_Result<void>, std::__future_base::_Result_base::_Deleter>, std::__future_base::_Task_state<std::function<void ()>, std::allocator<int>, void ()>::_M_run()::{lambda()#1}, void> >::_M_invoke(std::_Any_data const&) /usr/include/c++/7/bits/std_function.h:302 (gdb+0x73825c) bminor#12 std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>::operator()() const /usr/include/c++/7/bits/std_function.h:706 (gdb+0x733623) #13 std::__future_base::_State_baseV2::_M_do_set(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*) /usr/include/c++/7/future:561 (gdb+0x732bdf) #14 void std::__invoke_impl<void, void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*>(std::__invoke_memfun_deref, void (std::__future_base::_State_baseV2::*&&)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*&&, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*&&, bool*&&) /usr/include/c++/7/bits/invoke.h:73 (gdb+0x734c4f) #15 std::__invoke_result<void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*>::type std::__invoke<void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*>(void (std::__future_base::_State_baseV2::*&&)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*&&, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*&&, bool*&&) /usr/include/c++/7/bits/invoke.h:95 (gdb+0x733bc5) #16 std::call_once<void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*>(std::once_flag&, void (std::__future_base::_State_baseV2::*&&)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*&&, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*&&, bool*&&)::{lambda()#1}::operator()() const /usr/include/c++/7/mutex:672 (gdb+0x73300d) #17 std::call_once<void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*>(std::once_flag&, void (std::__future_base::_State_baseV2::*&&)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*&&, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*&&, bool*&&)::{lambda()#2}::operator()() const /usr/include/c++/7/mutex:677 (gdb+0x7330b2) #18 std::call_once<void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*>(std::once_flag&, void (std::__future_base::_State_baseV2::*&&)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*&&, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*&&, bool*&&)::{lambda()#2}::_FUN() /usr/include/c++/7/mutex:677 (gdb+0x7330f2) #19 pthread_once <null> (libtsan.so.0+0x4457c) #20 __gthread_once /usr/include/c++/7/x86_64-suse-linux/bits/gthr-default.h:699 (gdb+0x72f5dd) #21 void std::call_once<void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*>(std::once_flag&, void (std::__future_base::_State_baseV2::*&&)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*&&, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*&&, bool*&&) /usr/include/c++/7/mutex:684 (gdb+0x733224) #22 std::__future_base::_State_baseV2::_M_set_result(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>, bool) /usr/include/c++/7/future:401 (gdb+0x732852) #23 std::__future_base::_Task_state<std::function<void ()>, std::allocator<int>, void ()>::_M_run() /usr/include/c++/7/future:1423 (gdb+0x737bef) #24 std::packaged_task<void ()>::operator()() /usr/include/c++/7/future:1556 (gdb+0x1dac6da) #25 gdb::thread_pool::thread_function() gdbsupport/thread-pool.cc:242 (gdb+0x1dabffc) #26 void std::__invoke_impl<void, void (gdb::thread_pool::*)(), gdb::thread_pool*>(std::__invoke_memfun_deref, void (gdb::thread_pool::*&&)(), gdb::thread_pool*&&) /usr/include/c++/7/bits/invoke.h:73 (gdb+0x1dad0ab) #27 std::__invoke_result<void (gdb::thread_pool::*)(), gdb::thread_pool*>::type std::__invoke<void (gdb::thread_pool::*)(), gdb::thread_pool*>(void (gdb::thread_pool::*&&)(), gdb::thread_pool*&&) /usr/include/c++/7/bits/invoke.h:95 (gdb+0x1dac4dc) #28 decltype (__invoke((_S_declval<0ul>)(), (_S_declval<1ul>)())) std::thread::_Invoker<std::tuple<void (gdb::thread_pool::*)(), gdb::thread_pool*> >::_M_invoke<0ul, 1ul>(std::_Index_tuple<0ul, 1ul>) /usr/include/c++/7/thread:234 (gdb+0x1daf80e) #29 std::thread::_Invoker<std::tuple<void (gdb::thread_pool::*)(), gdb::thread_pool*> >::operator()() /usr/include/c++/7/thread:243 (gdb+0x1daf799) #30 std::thread::_State_impl<std::thread::_Invoker<std::tuple<void (gdb::thread_pool::*)(), gdb::thread_pool*> > >::_M_run() /usr/include/c++/7/thread:186 (gdb+0x1daf74e) #31 <null> <null> (libstdc++.so.6+0xdcac2) ... SUMMARY: ThreadSanitizer: data race gdb/dwarf2/read.c:5564 in queue_comp_unit ... The race happens when issuing the "file $exec" command. The race is between: - a worker thread writing the index cache, and in the process reading dwarf2_per_cu_data::is_debug_type, and - the main thread expanding the CU containing main, and in the process setting dwarf2_per_cu_data::queued. The two bitfields dwarf2_per_cu_data::queue and dwarf2_per_cu_data::is_debug_type share the same bitfield container. Fix this by making dwarf2_per_cu_data::queued a packed<bool, 1>. Tested on x86_64-linux. Approved-By: Tom Tromey <tom@tromey.com> PR symtab/30392 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30392
fincs
pushed a commit
to devkitPro/binutils-gdb
that referenced
this pull request
Sep 17, 2023
…s_debug_type} With gdb build with -fsanitize=thread and test-case gdb.base/index-cache.exp and target board debug-types, I run into: ... (gdb) file build/gdb/testsuite/outputs/gdb.base/index-cache/index-cache Reading symbols from build/gdb/testsuite/outputs/gdb.base/index-cache/index-cache... ================== WARNING: ThreadSanitizer: data race (pid=9654) Write of size 1 at 0x7b200000420d by main thread: #0 dwarf2_per_cu_data::get_header() const gdb/dwarf2/read.c:21513 (gdb+0x8d1eee) #1 dwarf2_per_cu_data::addr_size() const gdb/dwarf2/read.c:21524 (gdb+0x8d1f4e) #2 dwarf2_cu::addr_type() const gdb/dwarf2/cu.c:112 (gdb+0x806327) bminor#3 set_die_type gdb/dwarf2/read.c:21932 (gdb+0x8d3870) bminor#4 read_base_type gdb/dwarf2/read.c:15448 (gdb+0x8bcacb) bminor#5 read_type_die_1 gdb/dwarf2/read.c:19832 (gdb+0x8cc0a5) bminor#6 read_type_die gdb/dwarf2/read.c:19767 (gdb+0x8cbe6d) bminor#7 lookup_die_type gdb/dwarf2/read.c:19739 (gdb+0x8cbdc7) bminor#8 die_type gdb/dwarf2/read.c:19593 (gdb+0x8cb68a) bminor#9 read_subroutine_type gdb/dwarf2/read.c:14648 (gdb+0x8b998e) bminor#10 read_type_die_1 gdb/dwarf2/read.c:19792 (gdb+0x8cbf2f) bminor#11 read_type_die gdb/dwarf2/read.c:19767 (gdb+0x8cbe6d) bminor#12 read_func_scope gdb/dwarf2/read.c:10154 (gdb+0x8a4f36) #13 process_die gdb/dwarf2/read.c:6667 (gdb+0x898daa) #14 read_file_scope gdb/dwarf2/read.c:7682 (gdb+0x89bad8) #15 process_die gdb/dwarf2/read.c:6654 (gdb+0x898ced) #16 process_full_comp_unit gdb/dwarf2/read.c:6418 (gdb+0x8981de) #17 process_queue gdb/dwarf2/read.c:5690 (gdb+0x894433) #18 dw2_do_instantiate_symtab gdb/dwarf2/read.c:1770 (gdb+0x88623a) #19 dw2_instantiate_symtab gdb/dwarf2/read.c:1792 (gdb+0x886300) #20 dw2_expand_symtabs_matching_one(dwarf2_per_cu_data*, dwarf2_per_objfile*, gdb::function_view<bool (char const*, bool)>, gdb::function_view<bool (compunit_symtab*)>) gdb/dwarf2/read.c:3042 (gdb+0x88b1f1) #21 cooked_index_functions::expand_symtabs_matching(objfile*, gdb::function_view<bool (char const*, bool)>, lookup_name_info const*, gdb::function_view<bool (char const*)>, gdb::function_view<bool (compunit_symtab*)>, enum_flags<block_search_flag_values>, domain_enum, search_domain) gdb/dwarf2/read.c:16917 (gdb+0x8c228e) #22 objfile::lookup_symbol(block_enum, char const*, domain_enum) gdb/symfile-debug.c:288 (gdb+0xf39055) #23 lookup_symbol_via_quick_fns gdb/symtab.c:2385 (gdb+0xf66ab7) #24 lookup_symbol_in_objfile gdb/symtab.c:2516 (gdb+0xf6711b) #25 operator() gdb/symtab.c:2562 (gdb+0xf67272) #26 operator() gdb/../gdbsupport/function-view.h:305 (gdb+0xf776b1) #27 _FUN gdb/../gdbsupport/function-view.h:299 (gdb+0xf77708) #28 gdb::function_view<bool (objfile*)>::operator()(objfile*) const gdb/../gdbsupport/function-view.h:289 (gdb+0xc3fc97) #29 svr4_iterate_over_objfiles_in_search_order gdb/solib-svr4.c:3455 (gdb+0xecae47) #30 gdbarch_iterate_over_objfiles_in_search_order(gdbarch*, gdb::function_view<bool (objfile*)>, objfile*) gdb/gdbarch.c:5041 (gdb+0x537cad) #31 lookup_global_or_static_symbol gdb/symtab.c:2559 (gdb+0xf674fb) #32 lookup_global_symbol(char const*, block const*, domain_enum) gdb/symtab.c:2615 (gdb+0xf67780) #33 language_defn::lookup_symbol_nonlocal(char const*, block const*, domain_enum) const gdb/symtab.c:2447 (gdb+0xf66d6e) #34 lookup_symbol_aux gdb/symtab.c:2123 (gdb+0xf65cb3) #35 lookup_symbol_in_language(char const*, block const*, domain_enum, language, field_of_this_result*) gdb/symtab.c:1931 (gdb+0xf64dab) #36 set_initial_language() gdb/symfile.c:1708 (gdb+0xf43074) #37 symbol_file_add_main_1 gdb/symfile.c:1212 (gdb+0xf41608) #38 symbol_file_command(char const*, int) gdb/symfile.c:1681 (gdb+0xf42faf) #39 file_command gdb/exec.c:554 (gdb+0x94ff29) #40 do_simple_func gdb/cli/cli-decode.c:95 (gdb+0x6d9528) #41 cmd_func(cmd_list_element*, char const*, int) gdb/cli/cli-decode.c:2735 (gdb+0x6e0f69) #42 execute_command(char const*, int) gdb/top.c:575 (gdb+0xff379c) #43 command_handler(char const*) gdb/event-top.c:552 (gdb+0x94b5bc) #44 command_line_handler(std::unique_ptr<char, gdb::xfree_deleter<char> >&&) gdb/event-top.c:788 (gdb+0x94bc79) #45 tui_command_line_handler gdb/tui/tui-interp.c:104 (gdb+0x1034efc) #46 gdb_rl_callback_handler gdb/event-top.c:259 (gdb+0x94ab61) #47 rl_callback_read_char readline/readline/callback.c:290 (gdb+0x11be4ef) #48 gdb_rl_callback_read_char_wrapper_noexcept gdb/event-top.c:195 (gdb+0x94a960) #49 gdb_rl_callback_read_char_wrapper gdb/event-top.c:234 (gdb+0x94aa21) #50 stdin_event_handler gdb/ui.c:155 (gdb+0x10751a0) #51 handle_file_event gdbsupport/event-loop.cc:573 (gdb+0x1d95bac) #52 gdb_wait_for_event gdbsupport/event-loop.cc:694 (gdb+0x1d962e4) #53 gdb_do_one_event(int) gdbsupport/event-loop.cc:264 (gdb+0x1d946d0) #54 start_event_loop gdb/main.c:412 (gdb+0xb5ab52) #55 captured_command_loop gdb/main.c:476 (gdb+0xb5ad41) #56 captured_main gdb/main.c:1320 (gdb+0xb5cec1) #57 gdb_main(captured_main_args*) gdb/main.c:1339 (gdb+0xb5cf70) #58 main gdb/gdb.c:32 (gdb+0x416776) Previous read of size 1 at 0x7b200000420d by thread T11: #0 write_gdbindex gdb/dwarf2/index-write.c:1229 (gdb+0x831630) #1 write_dwarf_index(dwarf2_per_bfd*, char const*, char const*, char const*, dw_index_kind) gdb/dwarf2/index-write.c:1484 (gdb+0x832897) #2 index_cache::store(dwarf2_per_bfd*, index_cache_store_context const&) gdb/dwarf2/index-cache.c:173 (gdb+0x82db8d) bminor#3 cooked_index::maybe_write_index(dwarf2_per_bfd*, index_cache_store_context const&) gdb/dwarf2/cooked-index.c:645 (gdb+0x7f1d49) bminor#4 operator() gdb/dwarf2/cooked-index.c:474 (gdb+0x7f0f31) bminor#5 _M_invoke /usr/include/c++/7/bits/std_function.h:316 (gdb+0x7f2a13) bminor#6 std::function<void ()>::operator()() const /usr/include/c++/7/bits/std_function.h:706 (gdb+0x700952) bminor#7 void std::__invoke_impl<void, std::function<void ()>&>(std::__invoke_other, std::function<void ()>&) /usr/include/c++/7/bits/invoke.h:60 (gdb+0x7381a0) bminor#8 std::__invoke_result<std::function<void ()>&>::type std::__invoke<std::function<void ()>&>(std::function<void ()>&) /usr/include/c++/7/bits/invoke.h:95 (gdb+0x737e91) bminor#9 std::__future_base::_Task_state<std::function<void ()>, std::allocator<int>, void ()>::_M_run()::{lambda()#1}::operator()() const /usr/include/c++/7/future:1421 (gdb+0x737b59) bminor#10 std::__future_base::_Task_setter<std::unique_ptr<std::__future_base::_Result<void>, std::__future_base::_Result_base::_Deleter>, std::__future_base::_Task_state<std::function<void ()>, std::allocator<int>, void ()>::_M_run()::{lambda()#1}, void>::operator()() const /usr/include/c++/7/future:1362 (gdb+0x738660) bminor#11 std::_Function_handler<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> (), std::__future_base::_Task_setter<std::unique_ptr<std::__future_base::_Result<void>, std::__future_base::_Result_base::_Deleter>, std::__future_base::_Task_state<std::function<void ()>, std::allocator<int>, void ()>::_M_run()::{lambda()#1}, void> >::_M_invoke(std::_Any_data const&) /usr/include/c++/7/bits/std_function.h:302 (gdb+0x73825c) bminor#12 std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>::operator()() const /usr/include/c++/7/bits/std_function.h:706 (gdb+0x733623) #13 std::__future_base::_State_baseV2::_M_do_set(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*) /usr/include/c++/7/future:561 (gdb+0x732bdf) #14 void std::__invoke_impl<void, void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*>(std::__invoke_memfun_deref, void (std::__future_base::_State_baseV2::*&&)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*&&, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*&&, bool*&&) /usr/include/c++/7/bits/invoke.h:73 (gdb+0x734c4f) #15 std::__invoke_result<void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*>::type std::__invoke<void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*>(void (std::__future_base::_State_baseV2::*&&)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*&&, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*&&, bool*&&) /usr/include/c++/7/bits/invoke.h:95 (gdb+0x733bc5) #16 std::call_once<void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*>(std::once_flag&, void (std::__future_base::_State_baseV2::*&&)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*&&, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*&&, bool*&&)::{lambda()#1}::operator()() const /usr/include/c++/7/mutex:672 (gdb+0x73300d) #17 std::call_once<void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*>(std::once_flag&, void (std::__future_base::_State_baseV2::*&&)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*&&, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*&&, bool*&&)::{lambda()#2}::operator()() const /usr/include/c++/7/mutex:677 (gdb+0x7330b2) #18 std::call_once<void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*>(std::once_flag&, void (std::__future_base::_State_baseV2::*&&)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*&&, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*&&, bool*&&)::{lambda()#2}::_FUN() /usr/include/c++/7/mutex:677 (gdb+0x7330f2) #19 pthread_once <null> (libtsan.so.0+0x4457c) #20 __gthread_once /usr/include/c++/7/x86_64-suse-linux/bits/gthr-default.h:699 (gdb+0x72f5dd) #21 void std::call_once<void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*>(std::once_flag&, void (std::__future_base::_State_baseV2::*&&)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*&&, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*&&, bool*&&) /usr/include/c++/7/mutex:684 (gdb+0x733224) #22 std::__future_base::_State_baseV2::_M_set_result(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>, bool) /usr/include/c++/7/future:401 (gdb+0x732852) #23 std::__future_base::_Task_state<std::function<void ()>, std::allocator<int>, void ()>::_M_run() /usr/include/c++/7/future:1423 (gdb+0x737bef) #24 std::packaged_task<void ()>::operator()() /usr/include/c++/7/future:1556 (gdb+0x1dad25a) #25 gdb::thread_pool::thread_function() gdbsupport/thread-pool.cc:242 (gdb+0x1dacb7c) #26 void std::__invoke_impl<void, void (gdb::thread_pool::*)(), gdb::thread_pool*>(std::__invoke_memfun_deref, void (gdb::thread_pool::*&&)(), gdb::thread_pool*&&) /usr/include/c++/7/bits/invoke.h:73 (gdb+0x1dadc2b) #27 std::__invoke_result<void (gdb::thread_pool::*)(), gdb::thread_pool*>::type std::__invoke<void (gdb::thread_pool::*)(), gdb::thread_pool*>(void (gdb::thread_pool::*&&)(), gdb::thread_pool*&&) /usr/include/c++/7/bits/invoke.h:95 (gdb+0x1dad05c) #28 decltype (__invoke((_S_declval<0ul>)(), (_S_declval<1ul>)())) std::thread::_Invoker<std::tuple<void (gdb::thread_pool::*)(), gdb::thread_pool*> >::_M_invoke<0ul, 1ul>(std::_Index_tuple<0ul, 1ul>) /usr/include/c++/7/thread:234 (gdb+0x1db038e) #29 std::thread::_Invoker<std::tuple<void (gdb::thread_pool::*)(), gdb::thread_pool*> >::operator()() /usr/include/c++/7/thread:243 (gdb+0x1db0319) #30 std::thread::_State_impl<std::thread::_Invoker<std::tuple<void (gdb::thread_pool::*)(), gdb::thread_pool*> > >::_M_run() /usr/include/c++/7/thread:186 (gdb+0x1db02ce) #31 <null> <null> (libstdc++.so.6+0xdcac2) ... SUMMARY: ThreadSanitizer: data race gdb/dwarf2/read.c:21513 in dwarf2_per_cu_data::get_header() const ... The race happens when issuing the "file $exec" command. The race is between: - a worker thread writing the index cache, and in the process reading dwarf2_per_cu_data::is_debug_type, and - the main thread writing to dwarf2_per_cu_data::m_header_read_in. The two bitfields dwarf2_per_cu_data::m_header_read_in and dwarf2_per_cu_data::is_debug_type share the same bitfield container. Fix this by making dwarf2_per_cu_data::m_header_read_in a packed<bool, 1>. Tested on x86_64-linux. Approved-By: Tom Tromey <tom@tromey.com> PR symtab/30392 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30392
fincs
pushed a commit
to devkitPro/binutils-gdb
that referenced
this pull request
Sep 17, 2023
With gdb build with -fsanitize=thread, and the exec from test-case gdb.base/index-cache.exp, I run into: ... $ rm -f ~/.cache/gdb/*; \ gdb -q -batch -iex "set index-cache enabled on" index-cache \ -ex "print foobar" ... WARNING: ThreadSanitizer: data race (pid=23970) Write of size 1 at 0x7b200000410d by main thread: #0 dw_expand_symtabs_matching_file_matcher(dwarf2_per_objfile*, gdb::function_view<bool (char const*, bool)>) gdb/dwarf2/read.c:3077 (gdb+0x7ac54e) #1 cooked_index_functions::expand_symtabs_matching(objfile*, gdb::function_view<bool (char const*, bool)>, lookup_name_info const*, gdb::function_view<bool (char const*)>, gdb::function_view<bool (compunit_symtab*)>, enum_flags<block_search_flag_values>, domain_enum, search_domain) gdb/dwarf2/read.c:16812 (gdb+0x7d039f) #2 objfile::map_symtabs_matching_filename(char const*, char const*, gdb::function_view<bool (symtab*)>) gdb/symfile-debug.c:219 (gdb+0xda5aee) bminor#3 iterate_over_symtabs(char const*, gdb::function_view<bool (symtab*)>) gdb/symtab.c:648 (gdb+0xdc439d) bminor#4 lookup_symtab(char const*) gdb/symtab.c:662 (gdb+0xdc44a2) bminor#5 classify_name gdb/c-exp.y:3083 (gdb+0x61afec) bminor#6 c_yylex gdb/c-exp.y:3251 (gdb+0x61dd13) bminor#7 c_yyparse() build/gdb/c-exp.c.tmp:1988 (gdb+0x61f07e) bminor#8 c_parse(parser_state*) gdb/c-exp.y:3417 (gdb+0x62d864) bminor#9 language_defn::parser(parser_state*) const gdb/language.c:598 (gdb+0x9771c5) bminor#10 parse_exp_in_context gdb/parse.c:414 (gdb+0xb10a9b) bminor#11 parse_expression(char const*, innermost_block_tracker*, enum_flags<parser_flag>) gdb/parse.c:462 (gdb+0xb110ae) bminor#12 process_print_command_args gdb/printcmd.c:1321 (gdb+0xb4bf0c) #13 print_command_1 gdb/printcmd.c:1335 (gdb+0xb4ca2a) #14 print_command gdb/printcmd.c:1468 (gdb+0xb4cd5a) #15 do_simple_func gdb/cli/cli-decode.c:95 (gdb+0x65b078) #16 cmd_func(cmd_list_element*, char const*, int) gdb/cli/cli-decode.c:2735 (gdb+0x65ed53) #17 execute_command(char const*, int) gdb/top.c:575 (gdb+0xe3a76a) #18 catch_command_errors gdb/main.c:518 (gdb+0xa1837d) #19 execute_cmdargs gdb/main.c:617 (gdb+0xa1853f) #20 captured_main_1 gdb/main.c:1289 (gdb+0xa1aa58) #21 captured_main gdb/main.c:1310 (gdb+0xa1b95a) #22 gdb_main(captured_main_args*) gdb/main.c:1339 (gdb+0xa1b95a) #23 main gdb/gdb.c:39 (gdb+0x42506a) Previous read of size 1 at 0x7b200000410d by thread T1: #0 write_gdbindex gdb/dwarf2/index-write.c:1214 (gdb+0x75bb30) #1 write_dwarf_index(dwarf2_per_bfd*, char const*, char const*, char const*, dw_index_kind) gdb/dwarf2/index-write.c:1469 (gdb+0x75f803) #2 index_cache::store(dwarf2_per_bfd*, index_cache_store_context const&) gdb/dwarf2/index-cache.c:173 (gdb+0x755a36) bminor#3 cooked_index::maybe_write_index(dwarf2_per_bfd*, index_cache_store_context const&) gdb/dwarf2/cooked-index.c:642 (gdb+0x71c96d) bminor#4 operator() gdb/dwarf2/cooked-index.c:471 (gdb+0x71c96d) bminor#5 _M_invoke /usr/include/c++/7/bits/std_function.h:316 (gdb+0x71c96d) bminor#6 std::function<void ()>::operator()() const /usr/include/c++/7/bits/std_function.h:706 (gdb+0x72a57c) bminor#7 void std::__invoke_impl<void, std::function<void ()>&>(std::__invoke_other, std::function<void ()>&) /usr/include/c++/7/bits/invoke.h:60 (gdb+0x72a5db) bminor#8 std::__invoke_result<std::function<void ()>&>::type std::__invoke<std::function<void ()>&>(std::function<void ()>&) /usr/include/c++/7/bits/invoke.h:95 (gdb+0x72a5db) bminor#9 std::__future_base::_Task_state<std::function<void ()>, std::allocator<int>, void ()>::_M_run()::{lambda()#1}::operator()() const /usr/include/c++/7/future:1421 (gdb+0x72a5db) bminor#10 std::__future_base::_Task_setter<std::unique_ptr<std::__future_base::_Result<void>, std::__future_base::_Result_base::_Deleter>, std::__future_base::_Task_state<std::function<void ()>, std::allocator<int>, void ()>::_M_run()::{lambda()#1}, void>::operator()() const /usr/include/c++/7/future:1362 (gdb+0x72a5db) bminor#11 std::_Function_handler<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> (), std::__future_base::_Task_setter<std::unique_ptr<std::__future_base::_Result<void>, std::__future_base::_Result_base::_Deleter>, std::__future_base::_Task_state<std::function<void ()>, std::allocator<int>, void ()>::_M_run()::{lambda()#1}, void> >::_M_invoke(std::_Any_data const&) /usr/include/c++/7/bits/std_function.h:302 (gdb+0x72a5db) bminor#12 std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>::operator()() const /usr/include/c++/7/bits/std_function.h:706 (gdb+0x724954) #13 std::__future_base::_State_baseV2::_M_do_set(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*) /usr/include/c++/7/future:561 (gdb+0x724954) #14 void std::__invoke_impl<void, void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*>(std::__invoke_memfun_deref, void (std::__future_base::_State_baseV2::*&&)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*&&, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*&&, bool*&&) /usr/include/c++/7/bits/invoke.h:73 (gdb+0x72434a) #15 std::__invoke_result<void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*>::type std::__invoke<void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*>(void (std::__future_base::_State_baseV2::*&&)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*&&, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*&&, bool*&&) /usr/include/c++/7/bits/invoke.h:95 (gdb+0x72434a) #16 std::call_once<void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*>(std::once_flag&, void (std::__future_base::_State_baseV2::*&&)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*&&, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*&&, bool*&&)::{lambda()#1}::operator()() const /usr/include/c++/7/mutex:672 (gdb+0x72434a) #17 std::call_once<void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*>(std::once_flag&, void (std::__future_base::_State_baseV2::*&&)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*&&, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*&&, bool*&&)::{lambda()#2}::operator()() const /usr/include/c++/7/mutex:677 (gdb+0x72434a) #18 std::call_once<void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*>(std::once_flag&, void (std::__future_base::_State_baseV2::*&&)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*&&, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*&&, bool*&&)::{lambda()#2}::_FUN() /usr/include/c++/7/mutex:677 (gdb+0x72434a) #19 pthread_once <null> (libtsan.so.0+0x4457c) #20 __gthread_once /usr/include/c++/7/x86_64-suse-linux/bits/gthr-default.h:699 (gdb+0x72532b) #21 void std::call_once<void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*>(std::once_flag&, void (std::__future_base::_State_baseV2::*&&)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*&&, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*&&, bool*&&) /usr/include/c++/7/mutex:684 (gdb+0x72532b) #22 std::__future_base::_State_baseV2::_M_set_result(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>, bool) /usr/include/c++/7/future:401 (gdb+0x174568d) #23 std::__future_base::_Task_state<std::function<void ()>, std::allocator<int>, void ()>::_M_run() /usr/include/c++/7/future:1423 (gdb+0x174568d) #24 std::packaged_task<void ()>::operator()() /usr/include/c++/7/future:1556 (gdb+0x174568d) #25 gdb::thread_pool::thread_function() gdbsupport/thread-pool.cc:242 (gdb+0x174568d) #26 void std::__invoke_impl<void, void (gdb::thread_pool::*)(), gdb::thread_pool*>(std::__invoke_memfun_deref, void (gdb::thread_pool::*&&)(), gdb::thread_pool*&&) /usr/include/c++/7/bits/invoke.h:73 (gdb+0x1748040) #27 std::__invoke_result<void (gdb::thread_pool::*)(), gdb::thread_pool*>::type std::__invoke<void (gdb::thread_pool::*)(), gdb::thread_pool*>(void (gdb::thread_pool::*&&)(), gdb::thread_pool*&&) /usr/include/c++/7/bits/invoke.h:95 (gdb+0x1748040) #28 decltype (__invoke((_S_declval<0ul>)(), (_S_declval<1ul>)())) std::thread::_Invoker<std::tuple<void (gdb::thread_pool::*)(), gdb::thread_pool*> >::_M_invoke<0ul, 1ul>(std::_Index_tuple<0ul, 1ul>) /usr/include/c++/7/thread:234 (gdb+0x1748040) #29 std::thread::_Invoker<std::tuple<void (gdb::thread_pool::*)(), gdb::thread_pool*> >::operator()() /usr/include/c++/7/thread:243 (gdb+0x1748040) #30 std::thread::_State_impl<std::thread::_Invoker<std::tuple<void (gdb::thread_pool::*)(), gdb::thread_pool*> > >::_M_run() /usr/include/c++/7/thread:186 (gdb+0x1748040) #31 <null> <null> (libstdc++.so.6+0xdcac2) ... SUMMARY: ThreadSanitizer: data race gdb/dwarf2/read.c:3077 in dw_expand_symtabs_matching_file_matcher(dwarf2_per_objfile*, gdb::function_view<bool (char const*, bool)>) ... The race happens when issuing the "file $exec" command. The race is between: - a worker thread writing the index cache, and in the process reading dwarf2_per_cu_data::is_debug_type, and - the main thread writing to dwarf2_per_cu_data::mark. The two bitfields dwarf2_per_cu_data::mark and dwarf2_per_cu_data::is_debug_type share the same bitfield container. Fix this by making dwarf2_per_cu_data::mark a packed<unsigned int, 1>. Tested on x86_64-linux. PR symtab/30718 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30718
fincs
pushed a commit
to devkitPro/binutils-gdb
that referenced
this pull request
Sep 17, 2023
…g_types} With gdb build with -fsanitize=thread, and the exec from test-case gdb.base/index-cache.exp, I run into: ... $ rm -f ~/.cache/gdb/*; \ gdb -q -batch -iex "set index-cache enabled on" index-cache \ -ex "print foobar" ... WARNING: ThreadSanitizer: data race (pid=25018) Write of size 1 at 0x7b200000410d by main thread: #0 dw2_get_file_names_reader gdb/dwarf2/read.c:2033 (gdb+0x7ab023) #1 dw2_get_file_names gdb/dwarf2/read.c:2130 (gdb+0x7ab023) #2 dw_expand_symtabs_matching_file_matcher(dwarf2_per_objfile*, gdb::function_view<bool (char const*, bool)>) gdb/dwarf2/read.c:3105 (gdb+0x7ac6e9) bminor#3 cooked_index_functions::expand_symtabs_matching(objfile*, gdb::function_view<bool (char const*, bool)>, lookup_name_info const*, gdb::function_view<bool (char const*)>, gdb::function_view<bool (compunit_symtab*)>, enum_flags<block_search_flag_values>, domain_enum, search_domain) gdb/dwarf2/read.c:16812 (gdb+0x7d040f) bminor#4 objfile::map_symtabs_matching_filename(char const*, char const*, gdb::function_view<bool (symtab*)>) gdb/symfile-debug.c:219 (gdb+0xda5b6e) bminor#5 iterate_over_symtabs(char const*, gdb::function_view<bool (symtab*)>) gdb/symtab.c:648 (gdb+0xdc441d) bminor#6 lookup_symtab(char const*) gdb/symtab.c:662 (gdb+0xdc4522) bminor#7 classify_name gdb/c-exp.y:3083 (gdb+0x61afec) bminor#8 c_yylex gdb/c-exp.y:3251 (gdb+0x61dd13) bminor#9 c_yyparse() build/gdb/c-exp.c.tmp:1988 (gdb+0x61f07e) bminor#10 c_parse(parser_state*) gdb/c-exp.y:3417 (gdb+0x62d864) bminor#11 language_defn::parser(parser_state*) const gdb/language.c:598 (gdb+0x977245) bminor#12 parse_exp_in_context gdb/parse.c:414 (gdb+0xb10b1b) #13 parse_expression(char const*, innermost_block_tracker*, enum_flags<parser_flag>) gdb/parse.c:462 (gdb+0xb1112e) #14 process_print_command_args gdb/printcmd.c:1321 (gdb+0xb4bf8c) #15 print_command_1 gdb/printcmd.c:1335 (gdb+0xb4caaa) #16 print_command gdb/printcmd.c:1468 (gdb+0xb4cdda) #17 do_simple_func gdb/cli/cli-decode.c:95 (gdb+0x65b078) #18 cmd_func(cmd_list_element*, char const*, int) gdb/cli/cli-decode.c:2735 (gdb+0x65ed53) #19 execute_command(char const*, int) gdb/top.c:575 (gdb+0xe3a7ea) #20 catch_command_errors gdb/main.c:518 (gdb+0xa183fd) #21 execute_cmdargs gdb/main.c:617 (gdb+0xa185bf) #22 captured_main_1 gdb/main.c:1289 (gdb+0xa1aad8) #23 captured_main gdb/main.c:1310 (gdb+0xa1b9da) #24 gdb_main(captured_main_args*) gdb/main.c:1339 (gdb+0xa1b9da) #25 main gdb/gdb.c:39 (gdb+0x42506a) Previous read of size 1 at 0x7b200000410d by thread T2: #0 write_gdbindex gdb/dwarf2/index-write.c:1214 (gdb+0x75bb30) #1 write_dwarf_index(dwarf2_per_bfd*, char const*, char const*, char const*, dw_index_kind) gdb/dwarf2/index-write.c:1469 (gdb+0x75f803) #2 index_cache::store(dwarf2_per_bfd*, index_cache_store_context const&) gdb/dwarf2/index-cache.c:173 (gdb+0x755a36) bminor#3 cooked_index::maybe_write_index(dwarf2_per_bfd*, index_cache_store_context const&) gdb/dwarf2/cooked-index.c:642 (gdb+0x71c96d) bminor#4 operator() gdb/dwarf2/cooked-index.c:471 (gdb+0x71c96d) bminor#5 _M_invoke /usr/include/c++/7/bits/std_function.h:316 (gdb+0x71c96d) bminor#6 std::function<void ()>::operator()() const /usr/include/c++/7/bits/std_function.h:706 (gdb+0x72a57c) bminor#7 void std::__invoke_impl<void, std::function<void ()>&>(std::__invoke_other, std::function<void ()>&) /usr/include/c++/7/bits/invoke.h:60 (gdb+0x72a5db) bminor#8 std::__invoke_result<std::function<void ()>&>::type std::__invoke<std::function<void ()>&>(std::function<void ()>&) /usr/include/c++/7/bits/invoke.h:95 (gdb+0x72a5db) bminor#9 std::__future_base::_Task_state<std::function<void ()>, std::allocator<int>, void ()>::_M_run()::{lambda()#1}::operator()() const /usr/include/c++/7/future:1421 (gdb+0x72a5db) bminor#10 std::__future_base::_Task_setter<std::unique_ptr<std::__future_base::_Result<void>, std::__future_base::_Result_base::_Deleter>, std::__future_base::_Task_state<std::function<void ()>, std::allocator<int>, void ()>::_M_run()::{lambda()#1}, void>::operator()() const /usr/include/c++/7/future:1362 (gdb+0x72a5db) bminor#11 std::_Function_handler<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> (), std::__future_base::_Task_setter<std::unique_ptr<std::__future_base::_Result<void>, std::__future_base::_Result_base::_Deleter>, std::__future_base::_Task_state<std::function<void ()>, std::allocator<int>, void ()>::_M_run()::{lambda()#1}, void> >::_M_invoke(std::_Any_data const&) /usr/include/c++/7/bits/std_function.h:302 (gdb+0x72a5db) bminor#12 std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>::operator()() const /usr/include/c++/7/bits/std_function.h:706 (gdb+0x724954) #13 std::__future_base::_State_baseV2::_M_do_set(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*) /usr/include/c++/7/future:561 (gdb+0x724954) #14 void std::__invoke_impl<void, void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*>(std::__invoke_memfun_deref, void (std::__future_base::_State_baseV2::*&&)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*&&, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*&&, bool*&&) /usr/include/c++/7/bits/invoke.h:73 (gdb+0x72434a) #15 std::__invoke_result<void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*>::type std::__invoke<void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*>(void (std::__future_base::_State_baseV2::*&&)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*&&, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*&&, bool*&&) /usr/include/c++/7/bits/invoke.h:95 (gdb+0x72434a) #16 std::call_once<void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*>(std::once_flag&, void (std::__future_base::_State_baseV2::*&&)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*&&, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*&&, bool*&&)::{lambda()#1}::operator()() const /usr/include/c++/7/mutex:672 (gdb+0x72434a) #17 std::call_once<void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*>(std::once_flag&, void (std::__future_base::_State_baseV2::*&&)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*&&, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*&&, bool*&&)::{lambda()#2}::operator()() const /usr/include/c++/7/mutex:677 (gdb+0x72434a) #18 std::call_once<void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*>(std::once_flag&, void (std::__future_base::_State_baseV2::*&&)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*&&, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*&&, bool*&&)::{lambda()#2}::_FUN() /usr/include/c++/7/mutex:677 (gdb+0x72434a) #19 pthread_once <null> (libtsan.so.0+0x4457c) #20 __gthread_once /usr/include/c++/7/x86_64-suse-linux/bits/gthr-default.h:699 (gdb+0x72532b) #21 void std::call_once<void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*>(std::once_flag&, void (std::__future_base::_State_baseV2::*&&)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*&&, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*&&, bool*&&) /usr/include/c++/7/mutex:684 (gdb+0x72532b) #22 std::__future_base::_State_baseV2::_M_set_result(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>, bool) /usr/include/c++/7/future:401 (gdb+0x174570d) #23 std::__future_base::_Task_state<std::function<void ()>, std::allocator<int>, void ()>::_M_run() /usr/include/c++/7/future:1423 (gdb+0x174570d) #24 std::packaged_task<void ()>::operator()() /usr/include/c++/7/future:1556 (gdb+0x174570d) #25 gdb::thread_pool::thread_function() gdbsupport/thread-pool.cc:242 (gdb+0x174570d) #26 void std::__invoke_impl<void, void (gdb::thread_pool::*)(), gdb::thread_pool*>(std::__invoke_memfun_deref, void (gdb::thread_pool::*&&)(), gdb::thread_pool*&&) /usr/include/c++/7/bits/invoke.h:73 (gdb+0x17480c0) #27 std::__invoke_result<void (gdb::thread_pool::*)(), gdb::thread_pool*>::type std::__invoke<void (gdb::thread_pool::*)(), gdb::thread_pool*>(void (gdb::thread_pool::*&&)(), gdb::thread_pool*&&) /usr/include/c++/7/bits/invoke.h:95 (gdb+0x17480c0) #28 decltype (__invoke((_S_declval<0ul>)(), (_S_declval<1ul>)())) std::thread::_Invoker<std::tuple<void (gdb::thread_pool::*)(), gdb::thread_pool*> >::_M_invoke<0ul, 1ul>(std::_Index_tuple<0ul, 1ul>) /usr/include/c++/7/thread:234 (gdb+0x17480c0) #29 std::thread::_Invoker<std::tuple<void (gdb::thread_pool::*)(), gdb::thread_pool*> >::operator()() /usr/include/c++/7/thread:243 (gdb+0x17480c0) #30 std::thread::_State_impl<std::thread::_Invoker<std::tuple<void (gdb::thread_pool::*)(), gdb::thread_pool*> > >::_M_run() /usr/include/c++/7/thread:186 (gdb+0x17480c0) #31 <null> <null> (libstdc++.so.6+0xdcac2) ... SUMMARY: ThreadSanitizer: data race gdb/dwarf2/read.c:2033 in dw2_get_file_names_reader ... The race happens when issuing the "file $exec" command. The race is between: - a worker thread writing the index cache, and in the process reading dwarf2_per_cu_data::is_debug_type, and - the main thread writing to dwarf2_per_cu_data::files_read. The two bitfields dwarf2_per_cu_data::files_read and dwarf2_per_cu_data::is_debug_type share the same bitfield container. Fix this by making dwarf2_per_cu_data::files_read a packed<bool, 1>. Tested on x86_64-linux. PR symtab/30718 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30718
fincs
pushed a commit
to devkitPro/binutils-gdb
that referenced
this pull request
Sep 17, 2023
After running a number of programs under Windows gdb and detaching them, I typed run in gdb, and got a hang, here: (top-gdb) bt #0 sharing_input_terminal (pid=4672) at /home/pedro/gdb/src/gdb/mingw-hdep.c:388 #1 0x00007ff71a2d8678 in sharing_input_terminal (inf=0x23bf23dafb0) at /home/pedro/gdb/src/gdb/inflow.c:269 #2 0x00007ff71a2d887b in child_terminal_save_inferior (self=0x23bf23de060) at /home/pedro/gdb/src/gdb/inflow.c:423 bminor#3 0x00007ff71a2c80c0 in inf_child_target::terminal_save_inferior (this=0x23bf23de060) at /home/pedro/gdb/src/gdb/inf-child.c:111 bminor#4 0x00007ff71a429c0f in target_terminal_is_ours_kind (desired_state=target_terminal_state::is_ours_for_output) at /home/pedro/gdb/src/gdb/target.c:1037 bminor#5 0x00007ff71a429e02 in target_terminal::ours_for_output () at /home/pedro/gdb/src/gdb/target.c:1094 bminor#6 0x00007ff71a2ccc8e in post_create_inferior (from_tty=0) at /home/pedro/gdb/src/gdb/infcmd.c:245 bminor#7 0x00007ff71a2cd431 in run_command_1 (args=0x0, from_tty=0, run_how=RUN_NORMAL) at /home/pedro/gdb/src/gdb/infcmd.c:502 bminor#8 0x00007ff71a2cd58b in run_command (args=0x0, from_tty=0) at /home/pedro/gdb/src/gdb/infcmd.c:527 The problem is that the loop around GetConsoleProcessList looped forever, because there were exactly 10 processes to return. GetConsoleProcessList's documentation says: If the buffer is too small to hold all the valid process identifiers, the return value is the required number of array elements. The function will have stored no identifiers in the buffer. In this situation, use the return value to allocate a buffer that is large enough to store the entire list and call the function again. In this case, the buffer wasn't too small, it was exactly the right size, so we should have broken out of the loop. We didn't due to a "<" check that should have been "<=". That is fixed by this patch. Approved-By: Tom Tromey <tom@tromey.com> Reviewed-By: Eli Zaretskii <eliz@gnu.org> Change-Id: I14e4909f2ac2fa83d0d9b6e64418b5831ac4e4e3
berenm
pushed a commit
that referenced
this pull request
Sep 29, 2023
This commit fixes an issue that was discovered while writing the tests for the previous commit. I noticed that, when GDB restarts an inferior, the executable_changed event would trigger twice. The first notification would originate from: #0 exec_file_attach (filename=0x4046680 "/tmp/hello.x", from_tty=0) at ../../src/gdb/exec.c:513 #1 0x00000000006f3adb in reopen_exec_file () at ../../src/gdb/corefile.c:122 #2 0x0000000000e6a3f2 in generic_mourn_inferior () at ../../src/gdb/target.c:3682 #3 0x0000000000995121 in inf_child_target::mourn_inferior (this=0x2fe95c0 <the_amd64_linux_nat_target>) at ../../src/gdb/inf-child.c:192 #4 0x0000000000995cff in inf_ptrace_target::mourn_inferior (this=0x2fe95c0 <the_amd64_linux_nat_target>) at ../../src/gdb/inf-ptrace.c:125 #5 0x0000000000a32472 in linux_nat_target::mourn_inferior (this=0x2fe95c0 <the_amd64_linux_nat_target>) at ../../src/gdb/linux-nat.c:3609 #6 0x0000000000e68a40 in target_mourn_inferior (ptid=...) at ../../src/gdb/target.c:2761 #7 0x0000000000a323ec in linux_nat_target::kill (this=0x2fe95c0 <the_amd64_linux_nat_target>) at ../../src/gdb/linux-nat.c:3593 #8 0x0000000000e64d1c in target_kill () at ../../src/gdb/target.c:924 #9 0x00000000009a19bc in kill_if_already_running (from_tty=1) at ../../src/gdb/infcmd.c:328 #10 0x00000000009a1a6f in run_command_1 (args=0x0, from_tty=1, run_how=RUN_STOP_AT_MAIN) at ../../src/gdb/infcmd.c:381 #11 0x00000000009a20a5 in start_command (args=0x0, from_tty=1) at ../../src/gdb/infcmd.c:527 #12 0x000000000068dc5d in do_simple_func (args=0x0, from_tty=1, c=0x35c7200) at ../../src/gdb/cli/cli-decode.c:95 While the second originates from: #0 exec_file_attach (filename=0x3d7a1d0 "/tmp/hello.x", from_tty=0) at ../../src/gdb/exec.c:513 #1 0x0000000000dfe525 in reread_symbols (from_tty=1) at ../../src/gdb/symfile.c:2517 #2 0x00000000009a1a98 in run_command_1 (args=0x0, from_tty=1, run_how=RUN_STOP_AT_MAIN) at ../../src/gdb/infcmd.c:398 #3 0x00000000009a20a5 in start_command (args=0x0, from_tty=1) at ../../src/gdb/infcmd.c:527 #4 0x000000000068dc5d in do_simple_func (args=0x0, from_tty=1, c=0x35c7200) at ../../src/gdb/cli/cli-decode.c:95 In the first case the call to exec_file_attach first passes through reopen_exec_file. The reopen_exec_file performs a modification time check on the executable file, and only calls exec_file_attach if the executable has changed on disk since it was last loaded. However, in the second case things work a little differently. In this case GDB is really trying to reread the debug symbol. As such, we iterate over the objfiles list, and for each of those we check the modification time, if the file on disk has changed then we reload the debug symbols from that file. However, there is an additional check, if the objfile has the same name as the executable then we will call exec_file_attach, but we do so without checking the cached modification time that indicates when the executable was last reloaded, as a result, we reload the executable twice. In this commit I propose that reread_symbols be changed to unconditionally call reopen_exec_file before performing the objfile iteration. This will ensure that, if the executable has changed, then the executable will be reloaded, however, if the executable has already been recently reloaded, we will not reload it for a second time. After handling the executable, GDB can then iterate over the objfiles list and reload them in the normal way. With this done I now see the executable reloaded only once when GDB restarts an inferior, which means I can remove the kfail that I added to the gdb.python/py-exec-file.exp test in the previous commit. Approved-By: Tom Tromey <tom@tromey.com>
berenm
pushed a commit
that referenced
this pull request
Oct 6, 2023
It was pointed out on the mailing list that a recently added test (gdb.python/py-progspace-events.exp) was failing when run with the native-extended-gdbserver board. This test was added with this commit: commit 59912fb Date: Tue Sep 19 11:45:36 2023 +0100 gdb: add Python events for program space addition and removal It turns out though that the test is failing due to a existing bug in GDB, the new test just exposes the problem. Additionally, the failure really doesn't even rely on the new functionality added in the above commit. I reduced the test to a simple set of steps that reproduced the failure and tested against GDB 13, and the test passes; so the bug was introduced since then. In fact, the bug was introduced with this commit: commit a282736 Date: Fri Sep 8 15:48:16 2023 +0100 gdb: remove final user of the executable_changed observer This commit changed how the per-inferior auxv data cache is managed, specifically, when the cache is cleared, and it is this that leads to the failure. This bug is interesting because it exposes a number of issues with GDB, I'll explain all of the problems I see, though ultimately, I only propose fixing one problem in this commit, which is enough to resolve the crash we are currently seeing. The crash that we are seeing manifests like this: ... [Inferior 2 (process 3970384) exited normally] +inferior 1 [Switching to inferior 1 [process 3970383] (/tmp/build/gdb/testsuite/outputs/gdb.python/py-progspace-events/py-progspace-events)] [Switching to thread 1.1 (Thread 3970383.3970383)] #0 breakpt () at /tmp/build/gdb/testsuite/../../../src/gdb/testsuite/gdb.python/py-progspace-events.c:28 28 { /* Nothing. */ } (gdb) step +step terminate called after throwing an instance of 'gdb_exception_error' Fatal signal: Aborted ... etc ... What's happening is that GDB attempts to refill the auxv cache as a result of the gdbarch_has_shared_address_space call in program_space::~program_space, the backtrace looks like this: #0 0x00007fb4f419a9a5 in raise () from /lib64/libpthread.so.0 #1 0x00000000008b635d in handle_fatal_signal (sig=6) at ../../src/gdb/event-top.c:912 #2 <signal handler called> #3 0x00007fb4f38e3625 in raise () from /lib64/libc.so.6 #4 0x00007fb4f38cc8d9 in abort () from /lib64/libc.so.6 #5 0x00007fb4f3c70756 in __gnu_cxx::__verbose_terminate_handler() [clone .cold] () from /lib64/libstdc++.so.6 #6 0x00007fb4f3c7c6dc in __cxxabiv1::__terminate(void (*)()) () from /lib64/libstdc++.so.6 #7 0x00007fb4f3c7b6e9 in __cxa_call_terminate () from /lib64/libstdc++.so.6 #8 0x00007fb4f3c7c094 in __gxx_personality_v0 () from /lib64/libstdc++.so.6 #9 0x00007fb4f3a80c63 in _Unwind_RaiseException_Phase2 () from /lib64/libgcc_s.so.1 #10 0x00007fb4f3a8154e in _Unwind_Resume () from /lib64/libgcc_s.so.1 #11 0x0000000000e8832d in target_read_alloc_1<unsigned char> (ops=0x408a3a0, object=TARGET_OBJECT_AUXV, annex=0x0) at ../../src/gdb/target.c:2266 #12 0x0000000000e73dea in target_read_alloc (ops=0x408a3a0, object=TARGET_OBJECT_AUXV, annex=0x0) at ../../src/gdb/target.c:2315 #13 0x000000000058248c in target_read_auxv_raw (ops=0x408a3a0) at ../../src/gdb/auxv.c:379 #14 0x000000000058243d in target_read_auxv () at ../../src/gdb/auxv.c:368 #15 0x000000000058255c in target_auxv_search (match=0x0, valp=0x7ffdee17c598) at ../../src/gdb/auxv.c:415 #16 0x0000000000a464bb in linux_is_uclinux () at ../../src/gdb/linux-tdep.c:433 #17 0x0000000000a464f6 in linux_has_shared_address_space (gdbarch=0x409a2d0) at ../../src/gdb/linux-tdep.c:440 #18 0x0000000000510eae in gdbarch_has_shared_address_space (gdbarch=0x409a2d0) at ../../src/gdb/gdbarch.c:4889 #19 0x0000000000bc7558 in program_space::~program_space (this=0x4544aa0, __in_chrg=<optimized out>) at ../../src/gdb/progspace.c:124 #20 0x00000000009b245d in delete_inferior (inf=0x47b3de0) at ../../src/gdb/inferior.c:290 #21 0x00000000009b2c10 in prune_inferiors () at ../../src/gdb/inferior.c:480 #22 0x00000000009c5e3e in fetch_inferior_event () at ../../src/gdb/infrun.c:4558 #23 0x000000000099b4dc in inferior_event_handler (event_type=INF_REG_EVENT) at ../../src/gdb/inf-loop.c:42 #24 0x0000000000cbc64f in remote_async_serial_handler (scb=0x4090a30, context=0x408a6b0) at ../../src/gdb/remote.c:14859 #25 0x0000000000d83d3a in run_async_handler_and_reschedule (scb=0x4090a30) at ../../src/gdb/ser-base.c:138 #26 0x0000000000d83e1f in fd_event (error=0, context=0x4090a30) at ../../src/gdb/ser-base.c:189 So this is problem #1, if we throw an exception while deleting a program_space then this is not caught, and is going to crash GDB. Problem #2 becomes evident when we ask why GDB is throwing an error in this case; the error is thrown because the remote target, operating in non-async mode, can't read the auxv data while an inferior is running and GDB is waiting for a stop reply. The problem here then, is why does GDB get into a position where it tries to interact with the remote target in this way, at this time? The problem is caused by the prune_inferiors call which can be seen in the above backtrace. In prune_inferiors we check if the inferior is deletable, and if it is, we delete it. The problem is, I think, we should also check if the target is currently in a state that would allow us to delete the inferior. We don't currently have such a check available, we'd need to add one, but for the remote target, this would return false if the remote is in async mode and the remote is currently waiting for a stop reply. With this change in place GDB would defer deleting the inferior until the remote target has stopped, at which point GDB would be able to refill the auxv cache successfully. And then, problem #3 becomes evident when we ask why GDB is needing to refill the auxv cache now when it didn't need to for GDB 13. This is where the second commit mentioned above (a282736) comes in. Prior to this commit, the auxv cache was cleared by the executable_changed observer, while after that commit the auxv cache was cleared by the new_objfile observer -- but only when the new_objfile observer is used in the special mode that actually means that all objfiles have been unloaded (I know, the overloading of the new_objfile observer is horrible, and unnecessary, but it's not really important for this bug). The difference arises because the new_objfile observer is triggered from clear_symtab_users, which in turn is called from program_space::~program_space. The new_objfile observer for auxv does this: static void auxv_new_objfile_observer (struct objfile *objfile) { if (objfile == nullptr) invalidate_auxv_cache_inf (current_inferior ()); } That is, when all the objfiles are unloaded, we clear the auxv cache for the current inferior. The problem is, then when we look at the prune_inferiors -> delete_inferior -> ~program_space path, we see that the current inferior is not going to be an inferior that exists within the program_space being deleted; delete_inferior removes the deleted inferior from the global inferior list, and then only deletes the program_space if program_space::empty() returns true, which is only the case if the current inferior isn't within the program_space to delete, and no other inferior exists within that program_space either. What this means is that when the new_objfile observer is called we can't rely on the current inferior having any relationship with the program space in which the objfiles were removed. This was an error in the commit a282736, the only thing we can rely on is the current program space. As a result of this mistake, after commit a282736, GDB was sometimes clearing the auxv cache for a random inferior. In the native target case this was harmless as we can always refill the cache when needed, but in the remote target case, if we need to refill the cache when the remote target is executing, then we get the crash we observed. And additionally, if we think about this a little more, we see that commit a282736 made another mistake. When all the objfiles are removed, they are removed from a program_space, a program_space might contain multiple inferiors, so surely, we should clear the auxv cache for all of the matching inferiors? Given these two insights, that the current_inferior is not relevant, only the current_program_space, and that we should be clearing the cache for all inferiors in the current_program_space, we can update auxv_new_objfile_observer to: if (objfile == nullptr) { for (inferior *inf : all_inferiors ()) { if (inf->pspace == current_program_space) invalidate_auxv_cache_inf (inf); } } With this change we now correctly clear the auxv cache for the correct inferiors, and GDB no longer needs to refill the cache at an inconvenient time, this avoids the crash we were seeing. And finally, we reach problem #4. Inspired by the observation that using the current_inferior from within the ~program_space function was not correct, I added some debug to see if current_inferior() was called anywhere else (below ~program_space), and the answer is yes, it's called a often. Mostly the culprit is GDB doing: current_inferior ()->top_target ()-> .... But I think all of these calls are most likely doing the wrong thing, and only work because the top target in all these cases is shared between all inferiors, e.g. it's the native target, or the remote target for all inferiors. But if we had a truly multi-connection setup, then we might start to see odd behaviour. Problem #1 I'm just ignoring for now, I guess at some point we might run into this again, and then we'd need to solve this. But in this case I wasn't sure what a "good" solution would look like. We need the auxv data in order to implement the linux_is_uclinux() function. If we can't get the auxv data then what should we do, assume yes, or assume no? The right answer would probably be to propagate the error back up the stack, but then we reach ~program_space, and throwing exceptions from a destructor is problematic, so we'd need to catch and deal at this point. The linux_is_uclinux() call is made from within gdbarch_has_shared_address_space(), which is used like: if (!gdbarch_has_shared_address_space (target_gdbarch ())) delete this->aspace; So, we would have to choose; delete the address space or not. If we delete it on error, then we might delete an address space that is shared within another program space. If we don't delete the address space, then we might leak it. Neither choice is great. A better solution might be to have the address spaces be reference counted, then we could remove the gdbarch_has_shared_address_space call completely, and just rely on the reference count to auto-delete the address space when appropriate. The solution for problem #2 I already hinted at above, we should have a new target_can_delete_inferiors() call, which should be called from prune_inferiors, this would prevent GDB from trying to delete inferiors when a (remote) target is in a state where we know it can't delete the inferior. Deleting an inferior often (always?) requires sending packets to the remote, and if the remote is waiting for a stop reply then this will never work, so the pruning should be deferred in this case. The solution for problem #3 is included in this commit. And, for problem #4, I'm not sure what the right solution is. Maybe delete_inferior should ensure the inferior to be deleted is in place when ~program_space is called? But that seems a little weird, as the current inferior would, in theory, still be using the current program_space... Anyway, after this commit, the gdb.python/py-progspace-events.exp test now passes when run with the native-extended-remote board. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30935 Approved-By: Simon Marchi <simon.marchi@efficios.com> Change-Id: I41f0e6e2d7ecc1e5e55ec170f37acd4052f46eaf
berenm
pushed a commit
that referenced
this pull request
Nov 14, 2023
I noticed that on an Ubuntu 20.04 system, after a following patch ("Step over clone syscall w/ breakpoint, TARGET_WAITKIND_THREAD_CLONED"), the gdb.threads/step-over-exec.exp was passing cleanly, but still, we'd end up with four new unexpected GDB core dumps: === gdb Summary === # of unexpected core files 4 # of expected passes 48 That said patch is making the pre-existing gdb.threads/step-over-exec.exp testcase (almost silently) expose a latent problem in gdb/linux-nat.c, resulting in a GDB crash when: #1 - a non-leader thread execs #2 - the post-exec program stops somewhere #3 - you kill the inferior Instead of #3 directly, the testcase just returns, which ends up in gdb_exit, tearing down GDB, which kills the inferior, and is thus equivalent to #3 above. Vis (after said patch is applied): $ gdb --args ./gdb /home/pedro/gdb/build/gdb/testsuite/outputs/gdb.threads/step-over-exec/step-over-exec-execr-thread-other-diff-text-segs-true ... (top-gdb) r ... (gdb) b main ... (gdb) r ... Breakpoint 1, main (argc=1, argv=0x7fffffffdb88) at /home/pedro/gdb/build/gdb/testsuite/../../../src/gdb/testsuite/gdb.threads/step-over-exec.c:69 69 argv0 = argv[0]; (gdb) c Continuing. [New Thread 0x7ffff7d89700 (LWP 2506975)] Other going in exec. Exec-ing /home/pedro/gdb/build/gdb/testsuite/outputs/gdb.threads/step-over-exec/step-over-exec-execr-thread-other-diff-text-segs-true-execd process 2506769 is executing new program: /home/pedro/gdb/build/gdb/testsuite/outputs/gdb.threads/step-over-exec/step-over-exec-execr-thread-other-diff-text-segs-true-execd Thread 1 "step-over-exec-" hit Breakpoint 1, main () at /home/pedro/gdb/build/gdb/testsuite/../../../src/gdb/testsuite/gdb.threads/step-over-exec-execd.c:28 28 foo (); (gdb) k ... Thread 1 "gdb" received signal SIGSEGV, Segmentation fault. 0x000055555574444c in thread_info::has_pending_waitstatus (this=0x0) at ../../src/gdb/gdbthread.h:393 393 return m_suspend.waitstatus_pending_p; (top-gdb) bt #0 0x000055555574444c in thread_info::has_pending_waitstatus (this=0x0) at ../../src/gdb/gdbthread.h:393 #1 0x0000555555a884d1 in get_pending_child_status (lp=0x5555579b8230, ws=0x7fffffffd130) at ../../src/gdb/linux-nat.c:1345 #2 0x0000555555a8e5e6 in kill_unfollowed_child_callback (lp=0x5555579b8230) at ../../src/gdb/linux-nat.c:3564 #3 0x0000555555a92a26 in gdb::function_view<int (lwp_info*)>::bind<int, lwp_info*>(int (*)(lwp_info*))::{lambda(gdb::fv_detail::erased_callable, lwp_info*)#1}::operator()(gdb::fv_detail::erased_callable, lwp_info*) const (this=0x0, ecall=..., args#0=0x5555579b8230) at ../../src/gdb/../gdbsupport/function-view.h:284 #4 0x0000555555a92a51 in gdb::function_view<int (lwp_info*)>::bind<int, lwp_info*>(int (*)(lwp_info*))::{lambda(gdb::fv_detail::erased_callable, lwp_info*)#1}::_FUN(gdb::fv_detail::erased_callable, lwp_info*) () at ../../src/gdb/../gdbsupport/function-view.h:278 #5 0x0000555555a91f84 in gdb::function_view<int (lwp_info*)>::operator()(lwp_info*) const (this=0x7fffffffd210, args#0=0x5555579b8230) at ../../src/gdb/../gdbsupport/function-view.h:247 #6 0x0000555555a87072 in iterate_over_lwps(ptid_t, gdb::function_view<int (lwp_info*)>) (filter=..., callback=...) at ../../src/gdb/linux-nat.c:864 #7 0x0000555555a8e732 in linux_nat_target::kill (this=0x55555653af40 <the_amd64_linux_nat_target>) at ../../src/gdb/linux-nat.c:3590 #8 0x0000555555cfdc11 in target_kill () at ../../src/gdb/target.c:911 ... The root of the problem is that when a non-leader LWP execs, it just changes its tid to the tgid, replacing the pre-exec leader thread, becoming the new leader. There's no thread exit event for the execing thread. It's as if the old pre-exec LWP vanishes without trace. The ptrace man page says: "PTRACE_O_TRACEEXEC (since Linux 2.5.46) Stop the tracee at the next execve(2). A waitpid(2) by the tracer will return a status value such that status>>8 == (SIGTRAP | (PTRACE_EVENT_EXEC<<8)) If the execing thread is not a thread group leader, the thread ID is reset to thread group leader's ID before this stop. Since Linux 3.0, the former thread ID can be retrieved with PTRACE_GETEVENTMSG." When the core of GDB processes an exec events, it deletes all the threads of the inferior. But, that is too late -- deleting the thread does not delete the corresponding LWP, so we end leaving the pre-exec non-leader LWP stale in the LWP list. That's what leads to the crash above -- linux_nat_target::kill iterates over all LWPs, and after the patch in question, that code will look for the corresponding thread_info for each LWP. For the pre-exec non-leader LWP still listed, won't find one. This patch fixes it, by deleting the pre-exec non-leader LWP (and thread) from the LWP/thread lists as soon as we get an exec event out of ptrace. GDBserver does not need an equivalent fix, because it is already doing this, as side effect of mourning the pre-exec process, in gdbserver/linux-low.cc: else if (event == PTRACE_EVENT_EXEC && cs.report_exec_events) { ... /* Delete the execing process and all its threads. */ mourn (proc); switch_to_thread (nullptr); The crash with gdb.threads/step-over-exec.exp is not observable on newer systems, which postdate the glibc change to move "libpthread.so" internals to "libc.so.6", because right after the exec, GDB traps a load event for "libc.so.6", which leads to GDB trying to open libthread_db for the post-exec inferior, and, on such systems that succeeds. When we load libthread_db, we call linux_stop_and_wait_all_lwps, which, as the name suggests, stops all lwps, and then waits to see their stops. While doing this, GDB detects that the pre-exec stale LWP is gone, and deletes it. If we use "catch exec" to stop right at the exec before the "libc.so.6" load event ever happens, and issue "kill" right there, then GDB crashes on newer systems as well. So instead of tweaking gdb.threads/step-over-exec.exp to cover the fix, add a new gdb.threads/threads-after-exec.exp testcase that uses "catch exec". The test also uses the new "maint info linux-lwps" command if testing on Linux native, which also exposes the stale LWP problem with an unfixed GDB. Also tweak a comment in infrun.c:follow_exec referring to how linux-nat.c used to behave, as it would become stale otherwise. Reviewed-By: Andrew Burgess <aburgess@redhat.com> Change-Id: I21ec18072c7750f3a972160ae6b9e46590376643
berenm
pushed a commit
that referenced
this pull request
Nov 14, 2023
Running the gdb.threads/step-over-thread-exit-while-stop-all-threads.exp testcase added later in the series against gdbserver, after the TARGET_WAITKIND_NO_RESUMED fix from the following patch, would run into an infinite loop in stop_all_threads, leading to a timeout: FAIL: gdb.threads/step-over-thread-exit-while-stop-all-threads.exp: displaced-stepping=off: target-non-stop=on: iter 0: continue (timeout) The is really a latent bug, and it is about the fact that stop_all_threads stops listening to events from a target as soon as it sees a TARGET_WAITKIND_NO_RESUMED, ignoring that TARGET_WAITKIND_NO_RESUMED may be delayed. handle_no_resumed knows how to handle delayed no-resumed events, but stop_all_threads was never taught to. In more detail, here's what happens with that testcase: #1 - Multiple threads report breakpoint hits to gdb. #2 - gdb picks one events, and it's for thread 1. All other stops are left pending. thread 1 needs to move past a breakpoint, so gdb stops all threads to start an inline step over for thread 1. While stopping threads, some of the threads that were still running report events that are also left pending. #2 - gdb steps thread 1 #3 - Thread 1 exits while stepping (it steps over an exit syscall), gdbserver reports thread exit for thread 1 #4 - Thread 1 was the last resumed thread, so gdbserver also reports no-resumed: [remote] Notification received: Stop:w0;p3445d0.3445d3 [remote] Sending packet: $vStopped#55 [remote] Packet received: N [remote] Sending packet: $vStopped#55 [remote] Packet received: OK #5 - gdb processes the thread exit for thread 1, finishes the step over and restarts threads. #6 - gdb picks the next event to process out of one of the resumed threads with pending events: [infrun] random_resumed_with_pending_wait_status: Found 32 events, selecting #11 #7 - This is again a breakpoint hit and the breakpoint needs to be stepped over too, so gdb starts a step-over dance again. #8 - We reach stop_all_threads, which finds that some threads need to be stopped. #9 - wait_one finally consumes the no-resumed event queue by #4. Seeing this, wait_one disable target async, to stop listening for events out of the remote target. #10 - We still haven't seen all the stops expected, so stop_all_threads tries another iteration. #11 - Because the remote target is no longer async, and there are no other targets, wait_one return no-resumed immediately without polling the remote target. #12 - We still haven't seen all the stops expected, so stop_all_threads tries another iteration. goto #11, looping forever. Fix this by explicitly enabling/re-enabling target async on targets that can async, before waiting for stops. Reviewed-By: Andrew Burgess <aburgess@redhat.com> Change-Id: Ie3ffb0df89635585a6631aa842689cecc989e33f
berenm
pushed a commit
that referenced
this pull request
Dec 4, 2023
When using GDB on native linux, it can happen that, while attempting to detach an inferior, the inferior may have been exited or have been killed, yet still be in the list of lwps. Should that happen, the assert in x86_linux_update_debug_registers in gdb/nat/x86-linux-dregs.c will trigger. The line in question looks like this: gdb_assert (lwp_is_stopped (lwp)); For this case, the lwp isn't stopped - it's dead. The bug which brought this problem to my attention is one in which the pwntools library uses GDB to to debug a process; as the script is shutting things down, it kills the process that GDB is debugging and also sends GDB a SIGTERM signal, which causes GDB to detach all inferiors prior to exiting. Here's a link to the bug: https://bugzilla.redhat.com/show_bug.cgi?id=2192169 The following shell command mimics part of what the pwntools reproducer script does (with regard to shutting things down), but reproduces the bug much less reliably. I have found it necessary to run the command a bunch of times before seeing the bug. (I usually see it within 5-10 repetitions.) If you choose to try this command, make sure that you have no running "cat" or "gdb" processes first! cat </dev/zero >/dev/null & \ (sleep 5; (kill -KILL `pgrep cat` & kill -TERM `pgrep gdb`)) & \ sleep 1 ; \ gdb -q -iex 'set debuginfod enabled off' -ex 'set height 0' \ -ex c /usr/bin/cat `pgrep cat` So, basically, the idea here is to kill both gdb and cat at roughly the same time. If we happen to attempt the detach before the process lwp has been deleted from GDB's (linux native) LWP data structures, then the assert will trigger. The relevant part of the backtrace looks like this: #8 0x00000000008a83ae in x86_linux_update_debug_registers (lwp=0x1873280) at gdb/nat/x86-linux-dregs.c:146 #9 0x00000000008a862f in x86_linux_prepare_to_resume (lwp=0x1873280) at gdb/nat/x86-linux.c:81 #10 0x000000000048ea42 in x86_linux_nat_target::low_prepare_to_resume ( this=0x121eee0 <the_amd64_linux_nat_target>, lwp=0x1873280) at gdb/x86-linux-nat.h:70 #11 0x000000000081a452 in detach_one_lwp (lp=0x1873280, signo_p=0x7fff8ca3441c) at gdb/linux-nat.c:1374 #12 0x000000000081a85f in linux_nat_target::detach ( this=0x121eee0 <the_amd64_linux_nat_target>, inf=0x16e8f70, from_tty=0) at gdb/linux-nat.c:1450 #13 0x000000000083a23b in thread_db_target::detach ( this=0x1206ae0 <the_thread_db_target>, inf=0x16e8f70, from_tty=0) at gdb/linux-thread-db.c:1385 #14 0x0000000000a66722 in target_detach (inf=0x16e8f70, from_tty=0) at gdb/target.c:2526 #15 0x0000000000a8f0ad in kill_or_detach (inf=0x16e8f70, from_tty=0) at gdb/top.c:1659 #16 0x0000000000a8f4fa in quit_force (exit_arg=0x0, from_tty=0) at gdb/top.c:1762 #17 0x000000000070829c in async_sigterm_handler (arg=0x0) at gdb/event-top.c:1141 My colleague, Andrew Burgess, has done some recent work on other problems with detach. Upon hearing of this problem, he came up a test case which reliably reproduces the problem and tests for a few other problems as well. In addition to testing detach when the inferior has terminated due to a signal, it also tests detach when the inferior has exited normally. Andrew observed that the linux-native-only "checkpoint" command would be affected too, so the test also tests those cases when there's an active checkpoint. For the LWP exit / termination case with no checkpoint, that's handled via newly added checks of the waitstatus in detach_one_lwp in linux-nat.c. For the checkpoint detach problem, I chose to pass the lwp_info to linux_fork_detach in linux-fork.c. With that in place, suitable tests were added before attempting a PTRACE_DETACH operation. I added a few asserts at the beginning of linux_fork_detach and modified the caller code so that the newly added asserts shouldn't trigger. (That's what the 'pid == inferior_ptid.pid' check is about in gdb/linux-nat.c.) Lastly, I'll note that the checkpoint code needs some work with regard to background execution. This patch doesn't attempt to fix that problem, but it doesn't make it any worse. It does slightly improve the situation with detach because, due to the check noted above, linux_fork_detach() won't be called for the wrong inferior when there are multiple inferiors. (There are at least two other problems with the checkpoint code when there are multiple inferiors. See: https://sourceware.org/bugzilla/show_bug.cgi?id=31065) This commit also adds a new test, gdb.base/process-dies-while-detaching.exp. Andrew Burgess is the primary author of this test case. Its design is similar to that of gdb.threads/main-thread-exit-during-detach.exp, which was also written by Andrew. This test checks that GDB correctly handles several cases that can occur when GDB attempts to detach an inferior process. The process can exit or be terminated (e.g. via SIGKILL) prior to GDB's event loop getting a chance to remove it from GDB's internal data structures. To complicate things even more, detach works differently when a checkpoint (created via GDB's "checkpoint" command) exists for the inferior. This test checks all four possibilities: process exit with no checkpoint, process termination with no checkpoint, process exit with a checkpoint, and process termination with a checkpoint. Co-Authored-By: Andrew Burgess <aburgess@redhat.com> Approved-By: Andrew Burgess <aburgess@redhat.com>
davine47
pushed a commit
to davine47/binutils-gdb
that referenced
this pull request
Jan 18, 2024
Along with the relevant unit tests and updates to the existing regression tests, this adds support for the following novel rcpc3 insns: LDIAPP <Wt1>, <Wt2>, [<Xn|SP>] LDIAPP <Wt1>, <Wt2>, [<Xn|SP>], bminor#8 LDIAPP <Xt1>, <Xt2>, [<Xn|SP>] LDIAPP <Xt1>, <Xt2>, [<Xn|SP>], #16 STILP <Wt1>, <Wt2>, [<Xn|SP>] STILP <Wt1>, <Wt2>, [<Xn|SP>, #-8]! STILP <Xt1>, <Xt2>, [<Xn|SP>] STILP <Xt1>, <Xt2>, [<Xn|SP>, #-16]! LDAPR <Wt>, [<Xn|SP>], bminor#4 LDAPR <Xt>, [<Xn|SP>], bminor#8 STLR <Wt>, [<Xn|SP>, #-4]! STLR <Xt>, [<Xn|SP>, #-8]!
berenm
pushed a commit
that referenced
this pull request
Jan 20, 2024
Introduce new ui_file buffering_file to temporarily collect output written to gdb_std* output streams during print_thread, print_frame_info and print_stop_event. This ensures that output during these functions is not interrupted by debuginfod progress messages. With the addition of deferred debuginfo downloading it is possible for download progress messages to print during these events. Without any intervention we can end up with poorly formatted output: (gdb) backtrace [...] #8 0x00007fbe8af7d7cf in pygi_invoke_c_callable (Downloading separate debug info for /lib64/libpython3.11.so.1.0 function_cache=0x561221b224d0, state=<optimized out>... To fix this we buffer writes to gdb_std* output streams while allowing debuginfod progress messages to skip the buffers and print to the underlying output streams immediately. Buffered output is then written to the output streams. This ensures that progress messages print first, followed by uninterrupted frame/thread/stop info: (gdb) backtrace [...] Downloading separate debug info for /lib64/libpython3.11.so.1.0 #8 0x00007fbe8af7d7cf in pygi_invoke_c_callable (function_cache=0x561221b224d0, state=<optimized out>... Co-Authored-By: Andrew Burgess <aburgess@redhat.com> Approved-By: Andrew Burgess <aburgess@redhat.com>
berenm
pushed a commit
that referenced
this pull request
Feb 13, 2024
When running test-case gdb.dap/eof.exp, it occasionally coredumps. The thread triggering the coredump is: ... #0 0x0000ffff42bb2280 in __pthread_kill_implementation () from /lib64/libc.so.6 #1 0x0000ffff42b65800 [PAC] in raise () from /lib64/libc.so.6 #2 0x00000000007b03e8 [PAC] in handle_fatal_signal (sig=11) at gdb/event-top.c:926 #3 0x00000000007b0470 in handle_sigsegv (sig=11) at gdb/event-top.c:976 #4 <signal handler called> #5 0x0000000000606080 in cli_ui_out::do_message (this=0xffff2f7ed728, style=..., format=0xffff0c002af1 "%s", args=...) at gdb/cli-out.c:232 #6 0x0000000000ce6358 in ui_out::call_do_message (this=0xffff2f7ed728, style=..., format=0xffff0c002af1 "%s") at gdb/ui-out.c:584 #7 0x0000000000ce6610 in ui_out::vmessage (this=0xffff2f7ed728, in_style=..., format=0x16f93ea "", args=...) at gdb/ui-out.c:621 #8 0x0000000000ce3a9c in ui_file::vprintf (this=0xfffffbea1b18, ...) at gdb/ui-file.c:74 #9 0x0000000000d2b148 in gdb_vprintf (stream=0xfffffbea1b18, format=0x16f93e8 "%s", args=...) at gdb/utils.c:1898 #10 0x0000000000d2b23c in gdb_printf (stream=0xfffffbea1b18, format=0x16f93e8 "%s") at gdb/utils.c:1913 #11 0x0000000000ab5208 in gdbpy_write (self=0x33fe35d0, args=0x342ec280, kw=0x345c08b0) at gdb/python/python.c:1464 #12 0x0000ffff434acedc in cfunction_call () from /lib64/libpython3.12.so.1.0 #13 0x0000ffff4347c500 [PAC] in _PyObject_MakeTpCall () from /lib64/libpython3.12.so.1.0 #14 0x0000ffff43488b64 [PAC] in _PyEval_EvalFrameDefault () from /lib64/libpython3.12.so.1.0 #15 0x0000ffff434d8cd0 [PAC] in method_vectorcall () from /lib64/libpython3.12.so.1.0 #16 0x0000ffff434b9824 [PAC] in PyObject_CallOneArg () from /lib64/libpython3.12.so.1.0 #17 0x0000ffff43557674 [PAC] in PyFile_WriteObject () from /lib64/libpython3.12.so.1.0 #18 0x0000ffff435577a0 [PAC] in PyFile_WriteString () from /lib64/libpython3.12.so.1.0 #19 0x0000ffff43465354 [PAC] in thread_excepthook () from /lib64/libpython3.12.so.1.0 #20 0x0000ffff434ac6e0 [PAC] in cfunction_vectorcall_O () from /lib64/libpython3.12.so.1.0 #21 0x0000ffff434a32d8 [PAC] in PyObject_Vectorcall () from /lib64/libpython3.12.so.1.0 #22 0x0000ffff43488b64 [PAC] in _PyEval_EvalFrameDefault () from /lib64/libpython3.12.so.1.0 #23 0x0000ffff434d8d88 [PAC] in method_vectorcall () from /lib64/libpython3.12.so.1.0 #24 0x0000ffff435e0ef4 [PAC] in thread_run () from /lib64/libpython3.12.so.1.0 #25 0x0000ffff43591ec0 [PAC] in pythread_wrapper () from /lib64/libpython3.12.so.1.0 #26 0x0000ffff42bb0584 [PAC] in start_thread () from /lib64/libc.so.6 #27 0x0000ffff42c1fd4c [PAC] in thread_start () from /lib64/libc.so.6 ... The direct cause for the coredump seems to be that cli_ui_out::do_message is trying to write to a stream variable which does not look sound: ... (gdb) p *stream $8 = {_vptr.ui_file = 0x0, m_applied_style = {m_foreground = {m_simple = true, { m_value = 0, {m_red = 0 '\000', m_green = 0 '\000', m_blue = 0 '\000'}}}, m_background = {m_simple = 32, {m_value = 65535, {m_red = 255 '\377', m_green = 255 '\377', m_blue = 0 '\000'}}}, m_intensity = (unknown: 0x438fe710), m_reverse = 255}} ... The string that is being printed is: ... (gdb) p str $9 = "Exception in thread " ... so AFAICT this is a DAP thread running into an exception and trying to print it. If we look at the state of gdb's main thread, we have: ... #0 0x0000ffff42bac914 in __futex_abstimed_wait_cancelable64 () from /lib64/libc.so.6 #1 0x0000ffff42bafb44 [PAC] in pthread_cond_timedwait@@GLIBC_2.17 () from /lib64/libc.so.6 #2 0x0000ffff43466e9c [PAC] in take_gil () from /lib64/libpython3.12.so.1.0 #3 0x0000ffff43484fe0 [PAC] in PyEval_RestoreThread () from /lib64/libpython3.12.so.1.0 #4 0x0000000000ab8698 [PAC] in gdbpy_allow_threads::~gdbpy_allow_threads ( this=0xfffffbea1cf8, __in_chrg=<optimized out>) at gdb/python/python-internal.h:769 #5 0x0000000000ab2fec in execute_gdb_command (self=0x33fe35d0, args=0x34297b60, kw=0x34553d20) at gdb/python/python.c:681 #6 0x0000ffff434acedc in cfunction_call () from /lib64/libpython3.12.so.1.0 #7 0x0000ffff4347c500 [PAC] in _PyObject_MakeTpCall () from /lib64/libpython3.12.so.1.0 #8 0x0000ffff43488b64 [PAC] in _PyEval_EvalFrameDefault () from /lib64/libpython3.12.so.1.0 #9 0x0000ffff4353bce8 [PAC] in _PyObject_VectorcallTstate.lto_priv.3 () from /lib64/libpython3.12.so.1.0 #10 0x0000000000ab87fc [PAC] in gdbpy_event::operator() (this=0xffff14005900) at gdb/python/python.c:1061 #11 0x0000000000ab93e8 in std::__invoke_impl<void, gdbpy_event&> (__f=...) at /usr/include/c++/13/bits/invoke.h:61 #12 0x0000000000ab9204 in std::__invoke_r<void, gdbpy_event&> (__fn=...) at /usr/include/c++/13/bits/invoke.h:111 #13 0x0000000000ab8e90 in std::_Function_handler<..>::_M_invoke(...) (...) at /usr/include/c++/13/bits/std_function.h:290 #14 0x000000000062e0d0 in std::function<void ()>::operator()() const ( this=0xffff14005830) at /usr/include/c++/13/bits/std_function.h:591 #15 0x0000000000b67f14 in run_events (error=0, client_data=0x0) at gdb/run-on-main-thread.c:76 #16 0x000000000157e290 in handle_file_event (file_ptr=0x33dae3a0, ready_mask=1) at gdbsupport/event-loop.cc:573 #17 0x000000000157e760 in gdb_wait_for_event (block=1) at gdbsupport/event-loop.cc:694 #18 0x000000000157d464 in gdb_do_one_event (mstimeout=-1) at gdbsupport/event-loop.cc:264 #19 0x0000000000943a84 in start_event_loop () at gdb/main.c:401 #20 0x0000000000943bfc in captured_command_loop () at gdb/main.c:465 #21 0x000000000094567c in captured_main (data=0xfffffbea23e8) at gdb/main.c:1335 #22 0x0000000000945700 in gdb_main (args=0xfffffbea23e8) at gdb/main.c:1354 #23 0x0000000000423ab4 in main (argc=14, argv=0xfffffbea2578) at gdb/gdb.c:39 ... AFAIU, there's a race between the two threads on gdb_stderr: - the DAP thread samples the gdb_stderr value, and uses it a bit later to print to - the gdb main thread changes the gdb_stderr value forth and back, using a temporary value for string capture purposes The non-sound stream value is caused by gdb_stderr being sampled while pointing to a str_file object, and used once the str_file object is already destroyed. The error here is that the DAP thread attempts to print to gdb_stderr. Fix this by adding a thread_wrapper that: - catches all exceptions and logs them to dap.log, and - while we're at it, logs when exiting and using the thread_wrapper for each DAP thread. Tested on aarch64-linux. Approved-By: Tom Tromey <tom@tromey.com>
berenm
pushed a commit
that referenced
this pull request
Feb 15, 2024
When running test-case gdb.dap/eof.exp, we're likely to get a coredump due to a segfault in new_threadstate. At the point of the core dump, the gdb main thread looks like: ... (gdb) bt #0 0x0000fffee30d2280 in __pthread_kill_implementation () from /lib64/libc.so.6 #1 0x0000fffee3085800 [PAC] in raise () from /lib64/libc.so.6 #2 0x00000000007b03e8 [PAC] in handle_fatal_signal (sig=11) at gdb/event-top.c:926 #3 0x00000000007b0470 in handle_sigsegv (sig=11) at gdb/event-top.c:976 #4 <signal handler called> #5 0x0000fffee3a4db14 in new_threadstate () from /lib64/libpython3.12.so.1.0 #6 0x0000fffee3ab0548 [PAC] in PyGILState_Ensure () from /lib64/libpython3.12.so.1.0 #7 0x0000000000a6d034 [PAC] in gdbpy_gil::gdbpy_gil (this=0xffffcb279738) at gdb/python/python-internal.h:787 #8 0x0000000000ab87ac in gdbpy_event::~gdbpy_event (this=0xfffea8001ee0, __in_chrg=<optimized out>) at gdb/python/python.c:1051 #9 0x0000000000ab9460 in std::_Function_base::_Base_manager<...>::_M_destroy (__victim=...) at /usr/include/c++/13/bits/std_function.h:175 #10 0x0000000000ab92dc in std::_Function_base::_Base_manager<...>::_M_manager (__dest=..., __source=..., __op=std::__destroy_functor) at /usr/include/c++/13/bits/std_function.h:203 #11 0x0000000000ab8f14 in std::_Function_handler<...>::_M_manager(...) (...) at /usr/include/c++/13/bits/std_function.h:282 #12 0x000000000042dd9c in std::_Function_base::~_Function_base (this=0xfffea8001c10, __in_chrg=<optimized out>) at /usr/include/c++/13/bits/std_function.h:244 #13 0x000000000042e654 in std::function<void ()>::~function() (this=0xfffea8001c10, __in_chrg=<optimized out>) at /usr/include/c++/13/bits/std_function.h:334 #14 0x0000000000b68e60 in std::_Destroy<std::function<void ()> >(...) (...) at /usr/include/c++/13/bits/stl_construct.h:151 #15 0x0000000000b68cd0 in std::_Destroy_aux<false>::__destroy<...>(...) (...) at /usr/include/c++/13/bits/stl_construct.h:163 #16 0x0000000000b689d8 in std::_Destroy<...>(...) (...) at /usr/include/c++/13/bits/stl_construct.h:196 #17 0x0000000000b68414 in std::_Destroy<...>(...) (...) at /usr/include/c++/13/bits/alloc_traits.h:948 #18 std::vector<...>::~vector() (this=0x2a183c8 <runnables>) at /usr/include/c++/13/bits/stl_vector.h:732 #19 0x0000fffee3088370 in __run_exit_handlers () from /lib64/libc.so.6 #20 0x0000fffee3088450 [PAC] in exit () from /lib64/libc.so.6 #21 0x0000000000c95600 [PAC] in quit_force (exit_arg=0x0, from_tty=0) at gdb/top.c:1822 #22 0x0000000000609140 in quit_command (args=0x0, from_tty=0) at gdb/cli/cli-cmds.c:508 #23 0x0000000000c926a4 in quit_cover () at gdb/top.c:300 #24 0x00000000007b09d4 in async_disconnect (arg=0x0) at gdb/event-top.c:1230 #25 0x0000000000548acc in invoke_async_signal_handlers () at gdb/async-event.c:234 #26 0x000000000157d2d4 in gdb_do_one_event (mstimeout=-1) at gdbsupport/event-loop.cc:199 #27 0x0000000000943a84 in start_event_loop () at gdb/main.c:401 #28 0x0000000000943bfc in captured_command_loop () at gdb/main.c:465 #29 0x000000000094567c in captured_main (data=0xffffcb279d08) at gdb/main.c:1335 #30 0x0000000000945700 in gdb_main (args=0xffffcb279d08) at gdb/main.c:1354 #31 0x0000000000423ab4 in main (argc=14, argv=0xffffcb279e98) at gdb/gdb.c:39 ... The direct cause of the segfault is calling PyGILState_Ensure after calling Py_Finalize. AFAICT the problem is a race between the gdb main thread and DAP's JSON writer thread. On one side, we have the following events: - DAP's JSON reader thread reads an EOF, and lets DAP's main thread known by writing None into read_queue - DAP's main thread lets DAP's JSON writer thread known by writing None into write_queue - DAP's JSON writer thread sees the None in its queue, and calls send_gdb("quit") - a corresponding gdbpy_event is deposited in the runnables vector, to be run by the gdb main thread On the other side, we have the following events: - the gdb main thread receives a SIGHUP - the corresponding handler calls quit_force, which calls do_final_cleanups - one of the final cleanups is finalize_python, which calls Py_Finalize - quit_force calls exit, which triggers the exit handlers - one of the exit handlers is the destructor of the runnables vector - destruction of the vector triggers destruction of the remaining element - the remaining element is a gdbpy_event, and the destructor (indirectly) calls PyGILState_Ensure It's good to note that both events (EOF and SIGHUP) are caused by this line in the test-case: ... catch "close -i $gdb_spawn_id" ... where "expect close" closes the stdin and stdout file descriptors, which causes the SIGHUP to be send. So, for the system I'm running this on, the send_gdb("quit") is actually not needed. I'm not sure if we support any systems where it's actually needed. Fix this by removing the send_gdb("quit"). Tested on aarch64-linux. PR dap/31306 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=31306
berenm
pushed a commit
that referenced
this pull request
Feb 20, 2024
When building gdb with -O0 -fsanitize=address, and running test-case gdb.ada/uninitialized_vars.exp, I run into: ... (gdb) info locals a = 0 z = (a => 1, b => false, c => 2.0) ================================================================= ==66372==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x602000097f58 at pc 0xffff52c0da1c bp 0xffffc90a1d40 sp 0xffffc90a1d80 READ of size 4 at 0x602000097f58 thread T0 #0 0xffff52c0da18 in memmove (/lib64/libasan.so.8+0x6da18) #1 0xbcab24 in unsigned char* std::__copy_move_backward<false, true, std::random_access_iterator_tag>::__copy_move_b<unsigned char const, unsigned char>(unsigned char const*, unsigned char const*, unsigned char*) /usr/include/c++/13/bits/stl_algobase.h:748 #2 0xbc9bf4 in unsigned char* std::__copy_move_backward_a2<false, unsigned char const*, unsigned char*>(unsigned char const*, unsigned char const*, unsigned char*) /usr/include/c++/13/bits/stl_algobase.h:769 #3 0xbc898c in unsigned char* std::__copy_move_backward_a1<false, unsigned char const*, unsigned char*>(unsigned char const*, unsigned char const*, unsigned char*) /usr/include/c++/13/bits/stl_algobase.h:778 #4 0xbc715c in unsigned char* std::__copy_move_backward_a<false, unsigned char const*, unsigned char*>(unsigned char const*, unsigned char const*, unsigned char*) /usr/include/c++/13/bits/stl_algobase.h:807 #5 0xbc4e6c in unsigned char* std::copy_backward<unsigned char const*, unsigned char*>(unsigned char const*, unsigned char const*, unsigned char*) /usr/include/c++/13/bits/stl_algobase.h:867 #6 0xbc2934 in void gdb::copy<unsigned char const, unsigned char>(gdb::array_view<unsigned char const>, gdb::array_view<unsigned char>) gdb/../gdbsupport/array-view.h:223 #7 0x20e0100 in value::contents_copy_raw(value*, long, long, long) gdb/value.c:1239 #8 0x20e9830 in value::primitive_field(long, int, type*) gdb/value.c:3078 #9 0x20e98f8 in value_field(value*, int) gdb/value.c:3095 #10 0xcafd64 in print_field_values gdb/ada-valprint.c:658 #11 0xcb0fa0 in ada_val_print_struct_union gdb/ada-valprint.c:857 #12 0xcb1bb4 in ada_value_print_inner(value*, ui_file*, int, value_print_options const*) gdb/ada-valprint.c:1042 #13 0xc66e04 in ada_language::value_print_inner(value*, ui_file*, int, value_print_options const*) const (/home/vries/gdb/build/gdb/gdb+0xc66e04) #14 0x20ca1e8 in common_val_print(value*, ui_file*, int, value_print_options const*, language_defn const*) gdb/valprint.c:1092 #15 0x20caabc in common_val_print_checked(value*, ui_file*, int, value_print_options const*, language_defn const*) gdb/valprint.c:1184 #16 0x196c524 in print_variable_and_value(char const*, symbol*, frame_info_ptr, ui_file*, int) gdb/printcmd.c:2355 #17 0x1d99ca0 in print_variable_and_value_data::operator()(char const*, symbol*) gdb/stack.c:2308 #18 0x1dabca0 in gdb::function_view<void (char const*, symbol*)>::bind<print_variable_and_value_data>(print_variable_and_value_data&)::{lambda(gdb::fv_detail::erased_callable, char const*, symbol*)#1}::operator()(gdb::fv_detail::erased_callable, char const*, symbol*) const gdb/../gdbsupport/function-view.h:305 #19 0x1dabd14 in gdb::function_view<void (char const*, symbol*)>::bind<print_variable_and_value_data>(print_variable_and_value_data&)::{lambda(gdb::fv_detail::erased_callable, char const*, symbol*)#1}::_FUN(gdb::fv_detail::erased_callable, char const*, symbol*) gdb/../gdbsupport/function-view.h:299 #20 0x1dab34c in gdb::function_view<void (char const*, symbol*)>::operator()(char const*, symbol*) const gdb/../gdbsupport/function-view.h:289 #21 0x1d9963c in iterate_over_block_locals gdb/stack.c:2240 #22 0x1d99790 in iterate_over_block_local_vars(block const*, gdb::function_view<void (char const*, symbol*)>) gdb/stack.c:2259 #23 0x1d9a598 in print_frame_local_vars gdb/stack.c:2380 #24 0x1d9afac in info_locals_command(char const*, int) gdb/stack.c:2458 #25 0xfd7b30 in do_simple_func gdb/cli/cli-decode.c:95 #26 0xfe5a2c in cmd_func(cmd_list_element*, char const*, int) gdb/cli/cli-decode.c:2735 #27 0x1f03790 in execute_command(char const*, int) gdb/top.c:575 #28 0x1384080 in command_handler(char const*) gdb/event-top.c:566 #29 0x1384e2c in command_line_handler(std::unique_ptr<char, gdb::xfree_deleter<char> >&&) gdb/event-top.c:802 #30 0x1f731e4 in tui_command_line_handler gdb/tui/tui-interp.c:104 #31 0x1382a58 in gdb_rl_callback_handler gdb/event-top.c:259 #32 0x21dbb80 in rl_callback_read_char readline/readline/callback.c:290 #33 0x1382510 in gdb_rl_callback_read_char_wrapper_noexcept gdb/event-top.c:195 #34 0x138277c in gdb_rl_callback_read_char_wrapper gdb/event-top.c:234 #35 0x1fe9b40 in stdin_event_handler gdb/ui.c:155 #36 0x35ff1bc in handle_file_event gdbsupport/event-loop.cc:573 #37 0x35ff9d8 in gdb_wait_for_event gdbsupport/event-loop.cc:694 #38 0x35fd284 in gdb_do_one_event(int) gdbsupport/event-loop.cc:264 #39 0x1768080 in start_event_loop gdb/main.c:408 #40 0x17684c4 in captured_command_loop gdb/main.c:472 #41 0x176cfc8 in captured_main gdb/main.c:1342 #42 0x176d088 in gdb_main(captured_main_args*) gdb/main.c:1361 #43 0xb73edc in main gdb/gdb.c:39 #44 0xffff519b09d8 in __libc_start_call_main (/lib64/libc.so.6+0x309d8) #45 0xffff519b0aac in __libc_start_main@@GLIBC_2.34 (/lib64/libc.so.6+0x30aac) #46 0xb73c2c in _start (/home/vries/gdb/build/gdb/gdb+0xb73c2c) 0x602000097f58 is located 0 bytes after 8-byte region [0x602000097f50,0x602000097f58) allocated by thread T0 here: #0 0xffff52c65218 in calloc (/lib64/libasan.so.8+0xc5218) #1 0xcbc278 in xcalloc gdb/alloc.c:97 #2 0x35f21e8 in xzalloc(unsigned long) gdbsupport/common-utils.cc:29 #3 0x20de270 in value::allocate_contents(bool) gdb/value.c:937 #4 0x20edc08 in value::fetch_lazy() gdb/value.c:4033 #5 0x20dadc0 in value::entirely_covered_by_range_vector(std::vector<range, std::allocator<range> > const&) gdb/value.c:229 #6 0xcb2298 in value::entirely_optimized_out() gdb/value.h:560 #7 0x20ca6fc in value_check_printable gdb/valprint.c:1133 #8 0x20caa8c in common_val_print_checked(value*, ui_file*, int, value_print_options const*, language_defn const*) gdb/valprint.c:1182 #9 0x196c524 in print_variable_and_value(char const*, symbol*, frame_info_ptr, ui_file*, int) gdb/printcmd.c:2355 #10 0x1d99ca0 in print_variable_and_value_data::operator()(char const*, symbol*) gdb/stack.c:2308 #11 0x1dabca0 in gdb::function_view<void (char const*, symbol*)>::bind<print_variable_and_value_data>(print_variable_and_value_data&)::{lambda(gdb::fv_detail::erased_callable, char const*, symbol*)#1}::operator()(gdb::fv_detail::erased_callable, char const*, symbol*) const gdb/../gdbsupport/function-view.h:305 #12 0x1dabd14 in gdb::function_view<void (char const*, symbol*)>::bind<print_variable_and_value_data>(print_variable_and_value_data&)::{lambda(gdb::fv_detail::erased_callable, char const*, symbol*)#1}::_FUN(gdb::fv_detail::erased_callable, char const*, symbol*) gdb/../gdbsupport/function-view.h:299 #13 0x1dab34c in gdb::function_view<void (char const*, symbol*)>::operator()(char const*, symbol*) const gdb/../gdbsupport/function-view.h:289 #14 0x1d9963c in iterate_over_block_locals gdb/stack.c:2240 #15 0x1d99790 in iterate_over_block_local_vars(block const*, gdb::function_view<void (char const*, symbol*)>) gdb/stack.c:2259 #16 0x1d9a598 in print_frame_local_vars gdb/stack.c:2380 #17 0x1d9afac in info_locals_command(char const*, int) gdb/stack.c:2458 #18 0xfd7b30 in do_simple_func gdb/cli/cli-decode.c:95 #19 0xfe5a2c in cmd_func(cmd_list_element*, char const*, int) gdb/cli/cli-decode.c:2735 #20 0x1f03790 in execute_command(char const*, int) gdb/top.c:575 #21 0x1384080 in command_handler(char const*) gdb/event-top.c:566 #22 0x1384e2c in command_line_handler(std::unique_ptr<char, gdb::xfree_deleter<char> >&&) gdb/event-top.c:802 #23 0x1f731e4 in tui_command_line_handler gdb/tui/tui-interp.c:104 #24 0x1382a58 in gdb_rl_callback_handler gdb/event-top.c:259 #25 0x21dbb80 in rl_callback_read_char readline/readline/callback.c:290 #26 0x1382510 in gdb_rl_callback_read_char_wrapper_noexcept gdb/event-top.c:195 #27 0x138277c in gdb_rl_callback_read_char_wrapper gdb/event-top.c:234 #28 0x1fe9b40 in stdin_event_handler gdb/ui.c:155 #29 0x35ff1bc in handle_file_event gdbsupport/event-loop.cc:573 SUMMARY: AddressSanitizer: heap-buffer-overflow (/lib64/libasan.so.8+0x6da18) in memmove ... The error happens when trying to print either variable y or y2: ... type Variable_Record (A : Boolean := True) is record case A is when True => B : Integer; when False => C : Float; D : Integer; end case; end record; Y : Variable_Record := (A => True, B => 1); Y2 : Variable_Record := (A => False, C => 1.0, D => 2); ... when the variables are uninitialized. The error happens only when printing the entire variable: ... (gdb) p y.a $2 = 216 (gdb) p y.b There is no member named b. (gdb) p y.c $3 = 9.18340949e-41 (gdb) p y.d $4 = 1 (gdb) p y <AddressSanitizer: heap-buffer-overflow> ... The error happens as follows: - field a functions as discriminant, choosing either the b, or c+d variant. - when y.a happens to be set to 216, as above, gdb interprets this as the variable having the c+d variant (which is why trying to print y.b fails). - when printing y, gdb allocates a value, copies the bytes into it from the target, and then prints the value. - gdb allocates the value using the type size, which is 8. It's 8 because that's what the DW_AT_byte_size indicates. Note that for valid values of a, it gives correct results: if a is 0 (c+d variant), size is 12, if a is 1 (b variant), size is 8. - gdb tries to print field d, which is at an 8 byte offset, and that results in a out-of-bounds access for the allocated 8-byte value. Fix this by handling this case in value::contents_copy_raw, such that we have: ... (gdb) p y $1 = (a => 24, c => 9.18340949e-41, d => <error reading variable: access outside bounds of object>) ... An alternative (additional) fix could be this: in compute_variant_fields_inner gdb reads the discriminant y.a to decide which variant is active. It would be nice to detect that the value (y.a == 24) is not a valid Boolean, and give up on choosing a variant altoghether. However, the situation regarding the internal type CODE_TYPE_BOOL is currently ambiguous (see PR31282) and it's not possible to reliably decide what valid values are. The test-case source file gdb.ada/uninitialized-variable-record/parse.adb is a reduced version of gdb.ada/uninitialized_vars/parse.adb, so it copies the copyright years. Note that the test-case needs gcc-12 or newer, it's unsupported for older gcc versions. [ So, it would be nice to rewrite it into a dwarf assembly test-case. ] The test-case loops over all languages. This is inherited from an earlier attempt to fix this, which had language-specific fixes (in print_field_values, cp_print_value_fields, pascal_object_print_value_fields and f_language::value_print_inner). I've left this in, but I suppose it's not strictly necessary anymore. Tested on x86_64-linux. PR exp/31258 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=31258
berenm
pushed a commit
that referenced
this pull request
Feb 20, 2024
From the Python API, we can execute GDB commands via gdb.execute. If the command gives an exception, however, we need to recover the GDB prompt and enable stdin, because the exception does not reach top-level GDB or normal_stop. This was done in commit commit 1ba1ac8 Author: Andrew Burgess <andrew.burgess@embecosm.com> Date: Tue Nov 19 11:17:20 2019 +0000 gdb: Enable stdin on exception in execute_gdb_command with the following code: catch (const gdb_exception &except) { /* If an exception occurred then we won't hit normal_stop (), or have an exception reach the top level of the event loop, which are the two usual places in which stdin would be re-enabled. So, before we convert the exception and continue back in Python, we should re-enable stdin here. */ async_enable_stdin (); GDB_PY_HANDLE_EXCEPTION (except); } In this patch, we explain what happens when we run a GDB command in the context of a synchronous command, e.g. via Python observer notifications. As an example, suppose we have the following objfile event listener, specified in a file named file.py: ~~~ import gdb class MyListener: def __init__(self): gdb.events.new_objfile.connect(self.handle_new_objfile_event) self.processed_objfile = False def handle_new_objfile_event(self, event): if self.processed_objfile: return print("loading " + event.new_objfile.filename) self.processed_objfile = True gdb.execute('add-inferior -no-connection') gdb.execute('inferior 2') gdb.execute('target remote | gdbserver - /tmp/a.out') gdb.execute('inferior 1') the_listener = MyListener() ~~~ Using this Python file, we see the behavior below: $ gdb -q -ex "source file.py" -ex "run" --args a.out Reading symbols from a.out... Starting program: /tmp/a.out loading /lib64/ld-linux-x86-64.so.2 [New inferior 2] Added inferior 2 [Switching to inferior 2 [<null>] (<noexec>)] stdin/stdout redirected Process /tmp/a.out created; pid = 3075406 Remote debugging using stdio Reading /tmp/a.out from remote target... ... [Switching to inferior 1 [process 3075400] (/tmp/a.out)] [Switching to thread 1.1 (process 3075400)] #0 0x00007ffff7fe3290 in ?? () from /lib64/ld-linux-x86-64.so.2 (gdb) [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1". [Inferior 1 (process 3075400) exited normally] Note how the GDB prompt comes in-between the debugger output. We have this obscure behavior, because the executed command, "target remote", triggers an invocation of `normal_stop` that enables stdin. After that, however, the Python notification context completes and GDB continues with its normal flow of executing the 'run' command. This can be seen in the call stack below: (top-gdb) bt #0 async_enable_stdin () at src/gdb/event-top.c:523 #1 0x00005555561c3acd in normal_stop () at src/gdb/infrun.c:9432 #2 0x00005555561b328e in start_remote (from_tty=0) at src/gdb/infrun.c:3801 #3 0x0000555556441224 in remote_target::start_remote_1 (this=0x5555587882e0, from_tty=0, extended_p=0) at src/gdb/remote.c:5225 #4 0x000055555644166c in remote_target::start_remote (this=0x5555587882e0, from_tty=0, extended_p=0) at src/gdb/remote.c:5316 #5 0x00005555564430cf in remote_target::open_1 (name=0x55555878525e "| gdbserver - /tmp/a.out", from_tty=0, extended_p=0) at src/gdb/remote.c:6175 #6 0x0000555556441707 in remote_target::open (name=0x55555878525e "| gdbserver - /tmp/a.out", from_tty=0) at src/gdb/remote.c:5338 #7 0x00005555565ea63f in open_target (args=0x55555878525e "| gdbserver - /tmp/a.out", from_tty=0, command=0x555558589280) at src/gdb/target.c:824 #8 0x0000555555f0d89a in cmd_func (cmd=0x555558589280, args=0x55555878525e "| gdbserver - /tmp/a.out", from_tty=0) at src/gdb/cli/cli-decode.c:2735 #9 0x000055555661fb42 in execute_command (p=0x55555878529e "t", from_tty=0) at src/gdb/top.c:575 #10 0x0000555555f1a506 in execute_control_command_1 (cmd=0x555558756f00, from_tty=0) at src/gdb/cli/cli-script.c:529 #11 0x0000555555f1abea in execute_control_command (cmd=0x555558756f00, from_tty=0) at src/gdb/cli/cli-script.c:701 #12 0x0000555555f19fc7 in execute_control_commands (cmdlines=0x555558756f00, from_tty=0) at src/gdb/cli/cli-script.c:411 #13 0x0000555556400d91 in execute_gdb_command (self=0x7ffff43b5d00, args=0x7ffff440ab60, kw=0x0) at src/gdb/python/python.c:700 #14 0x00007ffff7a96023 in ?? () from /lib/x86_64-linux-gnu/libpython3.10.so.1.0 #15 0x00007ffff7a4dadc in _PyObject_MakeTpCall () from /lib/x86_64-linux-gnu/libpython3.10.so.1.0 #16 0x00007ffff79e9a1c in _PyEval_EvalFrameDefault () from /lib/x86_64-linux-gnu/libpython3.10.so.1.0 #17 0x00007ffff7b303af in ?? () from /lib/x86_64-linux-gnu/libpython3.10.so.1.0 #18 0x00007ffff7a50358 in ?? () from /lib/x86_64-linux-gnu/libpython3.10.so.1.0 #19 0x00007ffff7a4f3f4 in ?? () from /lib/x86_64-linux-gnu/libpython3.10.so.1.0 #20 0x00007ffff7a4f883 in PyObject_CallFunctionObjArgs () from /lib/x86_64-linux-gnu/libpython3.10.so.1.0 #21 0x00005555563a9758 in evpy_emit_event (event=0x7ffff42b5430, registry=0x7ffff42b4690) at src/gdb/python/py-event.c:104 #22 0x00005555563cb874 in emit_new_objfile_event (objfile=0x555558761700) at src/gdb/python/py-newobjfileevent.c:52 #23 0x00005555563b53bc in python_new_objfile (objfile=0x555558761700) at src/gdb/python/py-inferior.c:195 #24 0x0000555555d6dff0 in std::__invoke_impl<void, void (*&)(objfile*), objfile*> (__f=@0x5555585b5860: 0x5555563b5360 <python_new_objfile(objfile*)>) at /usr/include/c++/11/bits/invoke.h:61 #25 0x0000555555d6be18 in std::__invoke_r<void, void (*&)(objfile*), objfile*> (__fn=@0x5555585b5860: 0x5555563b5360 <python_new_objfile(objfile*)>) at /usr/include/c++/11/bits/invoke.h:111 #26 0x0000555555d69661 in std::_Function_handler<void (objfile*), void (*)(objfile*)>::_M_invoke(std::_Any_data const&, objfile*&&) (__functor=..., __args#0=@0x7fffffffd080: 0x555558761700) at /usr/include/c++/11/bits/std_function.h:290 #27 0x0000555556314caf in std::function<void (objfile*)>::operator()(objfile*) const (this=0x5555585b5860, __args#0=0x555558761700) at /usr/include/c++/11/bits/std_function.h:590 #28 0x000055555631444e in gdb::observers::observable<objfile*>::notify (this=0x55555836eea0 <gdb::observers::new_objfile>, args#0=0x555558761700) at src/gdb/../gdbsupport/observable.h:166 #29 0x0000555556599b3f in symbol_file_add_with_addrs (abfd=..., name=0x55555875d310 "/lib64/ld-linux-x86-64.so.2", add_flags=..., addrs=0x7fffffffd2f0, flags=..., parent=0x0) at src/gdb/symfile.c:1125 #30 0x0000555556599ca4 in symbol_file_add_from_bfd (abfd=..., name=0x55555875d310 "/lib64/ld-linux-x86-64.so.2", add_flags=..., addrs=0x7fffffffd2f0, flags=..., parent=0x0) at src/gdb/symfile.c:1160 #31 0x0000555556546371 in solib_read_symbols (so=..., flags=...) at src/gdb/solib.c:692 #32 0x0000555556546f0f in solib_add (pattern=0x0, from_tty=0, readsyms=1) at src/gdb/solib.c:1015 #33 0x0000555556539891 in enable_break (info=0x55555874e180, from_tty=0) at src/gdb/solib-svr4.c:2416 #34 0x000055555653b305 in svr4_solib_create_inferior_hook (from_tty=0) at src/gdb/solib-svr4.c:3058 #35 0x0000555556547cee in solib_create_inferior_hook (from_tty=0) at src/gdb/solib.c:1217 #36 0x0000555556196f6a in post_create_inferior (from_tty=0) at src/gdb/infcmd.c:275 #37 0x0000555556197670 in run_command_1 (args=0x0, from_tty=1, run_how=RUN_NORMAL) at src/gdb/infcmd.c:486 #38 0x000055555619783f in run_command (args=0x0, from_tty=1) at src/gdb/infcmd.c:512 #39 0x0000555555f0798d in do_simple_func (args=0x0, from_tty=1, c=0x555558567510) at src/gdb/cli/cli-decode.c:95 #40 0x0000555555f0d89a in cmd_func (cmd=0x555558567510, args=0x0, from_tty=1) at src/gdb/cli/cli-decode.c:2735 #41 0x000055555661fb42 in execute_command (p=0x7fffffffe2c4 "", from_tty=1) at src/gdb/top.c:575 #42 0x000055555626303b in catch_command_errors (command=0x55555661f4ab <execute_command(char const*, int)>, arg=0x7fffffffe2c1 "run", from_tty=1, do_bp_actions=true) at src/gdb/main.c:513 #43 0x000055555626328a in execute_cmdargs (cmdarg_vec=0x7fffffffdaf0, file_type=CMDARG_FILE, cmd_type=CMDARG_COMMAND, ret=0x7fffffffda3c) at src/gdb/main.c:612 #44 0x0000555556264849 in captured_main_1 (context=0x7fffffffdd40) at src/gdb/main.c:1293 #45 0x0000555556264a7f in captured_main (data=0x7fffffffdd40) at src/gdb/main.c:1314 #46 0x0000555556264b2e in gdb_main (args=0x7fffffffdd40) at src/gdb/main.c:1343 #47 0x0000555555ceccab in main (argc=9, argv=0x7fffffffde78) at src/gdb/gdb.c:39 (top-gdb) The use of the "target remote" command here is just an example. In principle, we would reproduce the problem with any command that triggers an invocation of `normal_stop`. To omit enabling the stdin in `normal_stop`, we would have to check the context we are in. Since we cannot do that, we add a new field to `struct ui` to track whether the prompt was already blocked, and set the tracker flag in the Python context before executing a GDB command. After applying this patch, the output becomes ... Reading symbols from a.out... Starting program: /tmp/a.out loading /lib64/ld-linux-x86-64.so.2 [New inferior 2] Added inferior 2 [Switching to inferior 2 [<null>] (<noexec>)] stdin/stdout redirected Process /tmp/a.out created; pid = 3032261 Remote debugging using stdio Reading /tmp/a.out from remote target... ... [Switching to inferior 1 [process 3032255] (/tmp/a.out)] [Switching to thread 1.1 (process 3032255)] #0 0x00007ffff7fe3290 in ?? () from /lib64/ld-linux-x86-64.so.2 [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1". [Inferior 1 (process 3032255) exited normally] (gdb) Let's now consider a secondary scenario, where the command executed from the Python raises an error. As an example, suppose we have the Python file below: def handle_new_objfile_event(self, event): ... print("loading " + event.new_objfile.filename) self.processed_objfile = True gdb.execute('print a') The executed command, "print a", gives an error because "a" is not defined. Without this patch, we see the behavior below, where the prompt is again placed incorrectly: ... Reading symbols from /tmp/a.out... Starting program: /tmp/a.out loading /lib64/ld-linux-x86-64.so.2 Python Exception <class 'gdb.error'>: No symbol "a" in current context. (gdb) [Inferior 1 (process 3980401) exited normally] This time, `async_enable_stdin` is called from the 'catch' block in `execute_gdb_command`: (top-gdb) bt #0 async_enable_stdin () at src/gdb/event-top.c:523 #1 0x0000555556400f0a in execute_gdb_command (self=0x7ffff43b5d00, args=0x7ffff440ab60, kw=0x0) at src/gdb/python/python.c:713 #2 0x00007ffff7a96023 in ?? () from /lib/x86_64-linux-gnu/libpython3.10.so.1.0 #3 0x00007ffff7a4dadc in _PyObject_MakeTpCall () from /lib/x86_64-linux-gnu/libpython3.10.so.1.0 #4 0x00007ffff79e9a1c in _PyEval_EvalFrameDefault () from /lib/x86_64-linux-gnu/libpython3.10.so.1.0 #5 0x00007ffff7b303af in ?? () from /lib/x86_64-linux-gnu/libpython3.10.so.1.0 #6 0x00007ffff7a50358 in ?? () from /lib/x86_64-linux-gnu/libpython3.10.so.1.0 #7 0x00007ffff7a4f3f4 in ?? () from /lib/x86_64-linux-gnu/libpython3.10.so.1.0 #8 0x00007ffff7a4f883 in PyObject_CallFunctionObjArgs () from /lib/x86_64-linux-gnu/libpython3.10.so.1.0 #9 0x00005555563a9758 in evpy_emit_event (event=0x7ffff42b5430, registry=0x7ffff42b4690) at src/gdb/python/py-event.c:104 #10 0x00005555563cb874 in emit_new_objfile_event (objfile=0x555558761410) at src/gdb/python/py-newobjfileevent.c:52 #11 0x00005555563b53bc in python_new_objfile (objfile=0x555558761410) at src/gdb/python/py-inferior.c:195 #12 0x0000555555d6dff0 in std::__invoke_impl<void, void (*&)(objfile*), objfile*> (__f=@0x5555585b5860: 0x5555563b5360 <python_new_objfile(objfile*)>) at /usr/include/c++/11/bits/invoke.h:61 #13 0x0000555555d6be18 in std::__invoke_r<void, void (*&)(objfile*), objfile*> (__fn=@0x5555585b5860: 0x5555563b5360 <python_new_objfile(objfile*)>) at /usr/include/c++/11/bits/invoke.h:111 #14 0x0000555555d69661 in std::_Function_handler<void (objfile*), void (*)(objfile*)>::_M_invoke(std::_Any_data const&, objfile*&&) (__functor=..., __args#0=@0x7fffffffd080: 0x555558761410) at /usr/include/c++/11/bits/std_function.h:290 #15 0x0000555556314caf in std::function<void (objfile*)>::operator()(objfile*) const (this=0x5555585b5860, __args#0=0x555558761410) at /usr/include/c++/11/bits/std_function.h:590 #16 0x000055555631444e in gdb::observers::observable<objfile*>::notify (this=0x55555836eea0 <gdb::observers::new_objfile>, args#0=0x555558761410) at src/gdb/../gdbsupport/observable.h:166 #17 0x0000555556599b3f in symbol_file_add_with_addrs (abfd=..., name=0x55555875d020 "/lib64/ld-linux-x86-64.so.2", add_flags=..., addrs=0x7fffffffd2f0, flags=..., parent=0x0) at src/gdb/symfile.c:1125 #18 0x0000555556599ca4 in symbol_file_add_from_bfd (abfd=..., name=0x55555875d020 "/lib64/ld-linux-x86-64.so.2", add_flags=..., addrs=0x7fffffffd2f0, flags=..., parent=0x0) at src/gdb/symfile.c:1160 #19 0x0000555556546371 in solib_read_symbols (so=..., flags=...) at src/gdb/solib.c:692 #20 0x0000555556546f0f in solib_add (pattern=0x0, from_tty=0, readsyms=1) at src/gdb/solib.c:1015 #21 0x0000555556539891 in enable_break (info=0x55555874a670, from_tty=0) at src/gdb/solib-svr4.c:2416 #22 0x000055555653b305 in svr4_solib_create_inferior_hook (from_tty=0) at src/gdb/solib-svr4.c:3058 #23 0x0000555556547cee in solib_create_inferior_hook (from_tty=0) at src/gdb/solib.c:1217 #24 0x0000555556196f6a in post_create_inferior (from_tty=0) at src/gdb/infcmd.c:275 #25 0x0000555556197670 in run_command_1 (args=0x0, from_tty=1, run_how=RUN_NORMAL) at src/gdb/infcmd.c:486 #26 0x000055555619783f in run_command (args=0x0, from_tty=1) at src/gdb/infcmd.c:512 #27 0x0000555555f0798d in do_simple_func (args=0x0, from_tty=1, c=0x555558567510) at src/gdb/cli/cli-decode.c:95 #28 0x0000555555f0d89a in cmd_func (cmd=0x555558567510, args=0x0, from_tty=1) at src/gdb/cli/cli-decode.c:2735 #29 0x000055555661fb42 in execute_command (p=0x7fffffffe2c4 "", from_tty=1) at src/gdb/top.c:575 #30 0x000055555626303b in catch_command_errors (command=0x55555661f4ab <execute_command(char const*, int)>, arg=0x7fffffffe2c1 "run", from_tty=1, do_bp_actions=true) at src/gdb/main.c:513 #31 0x000055555626328a in execute_cmdargs (cmdarg_vec=0x7fffffffdaf0, file_type=CMDARG_FILE, cmd_type=CMDARG_COMMAND, ret=0x7fffffffda3c) at src/gdb/main.c:612 #32 0x0000555556264849 in captured_main_1 (context=0x7fffffffdd40) at src/gdb/main.c:1293 #33 0x0000555556264a7f in captured_main (data=0x7fffffffdd40) at src/gdb/main.c:1314 #34 0x0000555556264b2e in gdb_main (args=0x7fffffffdd40) at src/gdb/main.c:1343 #35 0x0000555555ceccab in main (argc=9, argv=0x7fffffffde78) at src/gdb/gdb.c:39 (top-gdb) Again, after we enable stdin, GDB continues with its normal flow of the 'run' command and receives the inferior's exit event, where it would have enabled stdin, if we had not done it prematurely. (top-gdb) bt #0 async_enable_stdin () at src/gdb/event-top.c:523 #1 0x00005555561c3acd in normal_stop () at src/gdb/infrun.c:9432 #2 0x00005555561b5bf1 in fetch_inferior_event () at src/gdb/infrun.c:4700 #3 0x000055555618d6a7 in inferior_event_handler (event_type=INF_REG_EVENT) at src/gdb/inf-loop.c:42 #4 0x000055555620ecdb in handle_target_event (error=0, client_data=0x0) at src/gdb/linux-nat.c:4316 #5 0x0000555556f33035 in handle_file_event (file_ptr=0x5555587024e0, ready_mask=1) at src/gdbsupport/event-loop.cc:573 #6 0x0000555556f3362f in gdb_wait_for_event (block=0) at src/gdbsupport/event-loop.cc:694 #7 0x0000555556f322cd in gdb_do_one_event (mstimeout=-1) at src/gdbsupport/event-loop.cc:217 #8 0x0000555556262df8 in start_event_loop () at src/gdb/main.c:407 #9 0x0000555556262f85 in captured_command_loop () at src/gdb/main.c:471 #10 0x0000555556264a84 in captured_main (data=0x7fffffffdd40) at src/gdb/main.c:1324 #11 0x0000555556264b2e in gdb_main (args=0x7fffffffdd40) at src/gdb/main.c:1343 #12 0x0000555555ceccab in main (argc=9, argv=0x7fffffffde78) at src/gdb/gdb.c:39 (top-gdb) The solution implemented by this patch addresses the problem. After applying the patch, the output becomes $ gdb -q -ex "source file.py" -ex "run" --args a.out Reading symbols from /tmp/a.out... Starting program: /tmp/a.out loading /lib64/ld-linux-x86-64.so.2 Python Exception <class 'gdb.error'>: No symbol "a" in current context. [Inferior 1 (process 3984511) exited normally] (gdb) Regression-tested on X86_64 Linux using the default board file (i.e. unix). Co-Authored-By: Oguzhan Karakaya <oguzhan.karakaya@intel.com> Reviewed-By: Guinevere Larsen <blarsen@redhat.com> Approved-By: Tom Tromey <tom@tromey.com>
berenm
pushed a commit
that referenced
this pull request
Apr 10, 2024
As it stands, these insns are incorrectly encoded as vqrshr[u]n. Concretely, the problem can be seen as follows: $ cat t.s vqrshrnb.s16 q0,q0,#8 vqshrnb.s16 q0,q0,#8 $ gas/as-new t.s -march=armv8.1-m.main+mve -o t.o $ binutils/objdump -d t.o -m armv8.1-m.main t.o: file format elf32-littlearm Disassembly of section .text: 00000000 <.text>: 0: ee88 0f41 vqrshrnb.s16 q0, q0, #0 4: ee88 0f41 vqrshrnb.s16 q0, q0, #0 Here we assemble these two instructions to the same opcode. The encoding of the first is the correct, while the encoding of the second is incorrect, and the bottom bit should be clear, see the Armv8-M ARM: https://developer.arm.com/documentation/ddi0553/latest/ There is an additional problem here in that the disassembly of the immediate is incorrect. llvm-objdump shows the correct disassembly here: t.o: file format elf32-littlearm Disassembly of section .text: 00000000 <$t>: 0: ee88 0f41 vqrshrnb.s16 q0, q0, #8 4: ee88 0f41 vqrshrnb.s16 q0, q0, #8 Note that we defer adding a test for the correct encoding of these insns until the next patch which fixes the disassembly issue.
berenm
pushed a commit
that referenced
this pull request
Apr 28, 2024
When running test-case gdb.server/connect-with-no-symbol-file.exp on aarch64-linux (specifically, an opensuse leap 15.5 container on a fedora asahi 39 system), I run into: ... (gdb) detach^M Detaching from program: target:connect-with-no-symbol-file, process 185104^M Ending remote debugging.^M terminate called after throwing an instance of 'gdb_exception_error'^M ... The detailed backtrace of the corefile is: ... (gdb) bt #0 0x0000ffff75504f54 in raise () from /lib64/libpthread.so.0 #1 0x00000000007a86b4 in handle_fatal_signal (sig=6) at gdb/event-top.c:926 #2 <signal handler called> #3 0x0000ffff74b977b4 in raise () from /lib64/libc.so.6 #4 0x0000ffff74b98c18 in abort () from /lib64/libc.so.6 #5 0x0000ffff74ea26f4 in __gnu_cxx::__verbose_terminate_handler() () from /usr/lib64/libstdc++.so.6 #6 0x0000ffff74ea011c in ?? () from /usr/lib64/libstdc++.so.6 #7 0x0000ffff74ea0180 in std::terminate() () from /usr/lib64/libstdc++.so.6 #8 0x0000ffff74ea0464 in __cxa_throw () from /usr/lib64/libstdc++.so.6 #9 0x0000000001548870 in throw_it (reason=RETURN_ERROR, error=TARGET_CLOSE_ERROR, fmt=0x16c7810 "Remote connection closed", ap=...) at gdbsupport/common-exceptions.cc:203 #10 0x0000000001548920 in throw_verror (error=TARGET_CLOSE_ERROR, fmt=0x16c7810 "Remote connection closed", ap=...) at gdbsupport/common-exceptions.cc:211 #11 0x0000000001548a00 in throw_error (error=TARGET_CLOSE_ERROR, fmt=0x16c7810 "Remote connection closed") at gdbsupport/common-exceptions.cc:226 #12 0x0000000000ac8f2c in remote_target::readchar (this=0x233d3d90, timeout=2) at gdb/remote.c:9856 #13 0x0000000000ac9f04 in remote_target::getpkt (this=0x233d3d90, buf=0x233d40a8, forever=false, is_notif=0x0) at gdb/remote.c:10326 #14 0x0000000000acf3d0 in remote_target::remote_hostio_send_command (this=0x233d3d90, command_bytes=13, which_packet=17, remote_errno=0xfffff1a3cf38, attachment=0xfffff1a3ce88, attachment_len=0xfffff1a3ce90) at gdb/remote.c:12567 #15 0x0000000000ad03bc in remote_target::fileio_fstat (this=0x233d3d90, fd=3, st=0xfffff1a3d020, remote_errno=0xfffff1a3cf38) at gdb/remote.c:12979 #16 0x0000000000c39878 in target_fileio_fstat (fd=0, sb=0xfffff1a3d020, target_errno=0xfffff1a3cf38) at gdb/target.c:3315 #17 0x00000000007eee5c in target_fileio_stream::stat (this=0x233d4400, abfd=0x2323fc40, sb=0xfffff1a3d020) at gdb/gdb_bfd.c:467 #18 0x00000000007f012c in <lambda(bfd*, void*, stat*)>::operator()(bfd *, void *, stat *) const (__closure=0x0, abfd=0x2323fc40, stream=0x233d4400, sb=0xfffff1a3d020) at gdb/gdb_bfd.c:955 #19 0x00000000007f015c in <lambda(bfd*, void*, stat*)>::_FUN(bfd *, void *, stat *) () at gdb/gdb_bfd.c:956 #20 0x0000000000f9b838 in opncls_bstat (abfd=0x2323fc40, sb=0xfffff1a3d020) at bfd/opncls.c:665 #21 0x0000000000f90adc in bfd_stat (abfd=0x2323fc40, statbuf=0xfffff1a3d020) at bfd/bfdio.c:431 #22 0x000000000065fe20 in reopen_exec_file () at gdb/corefile.c:52 #23 0x0000000000c3a3e8 in generic_mourn_inferior () at gdb/target.c:3642 #24 0x0000000000abf3f0 in remote_unpush_target (target=0x233d3d90) at gdb/remote.c:6067 #25 0x0000000000aca8b0 in remote_target::mourn_inferior (this=0x233d3d90) at gdb/remote.c:10587 #26 0x0000000000c387cc in target_mourn_inferior ( ptid=<error reading variable: Cannot access memory at address 0x2d310>) at gdb/target.c:2738 #27 0x0000000000abfff0 in remote_target::remote_detach_1 (this=0x233d3d90, inf=0x22fce540, from_tty=1) at gdb/remote.c:6421 #28 0x0000000000ac0094 in remote_target::detach (this=0x233d3d90, inf=0x22fce540, from_tty=1) at gdb/remote.c:6436 #29 0x0000000000c37c3c in target_detach (inf=0x22fce540, from_tty=1) at gdb/target.c:2526 #30 0x0000000000860424 in detach_command (args=0x0, from_tty=1) at gdb/infcmd.c:2817 #31 0x000000000060b594 in do_simple_func (args=0x0, from_tty=1, c=0x231431a0) at gdb/cli/cli-decode.c:94 #32 0x00000000006108c8 in cmd_func (cmd=0x231431a0, args=0x0, from_tty=1) at gdb/cli/cli-decode.c:2741 #33 0x0000000000c65a94 in execute_command (p=0x232e52f6 "", from_tty=1) at gdb/top.c:570 #34 0x00000000007a7d2c in command_handler (command=0x232e52f0 "") at gdb/event-top.c:566 #35 0x00000000007a8290 in command_line_handler (rl=...) at gdb/event-top.c:802 #36 0x0000000000c9092c in tui_command_line_handler (rl=...) at gdb/tui/tui-interp.c:103 #37 0x00000000007a750c in gdb_rl_callback_handler (rl=0x23385330 "detach") at gdb/event-top.c:258 #38 0x0000000000d910f4 in rl_callback_read_char () at readline/readline/callback.c:290 #39 0x00000000007a7338 in gdb_rl_callback_read_char_wrapper_noexcept () at gdb/event-top.c:194 #40 0x00000000007a73f0 in gdb_rl_callback_read_char_wrapper (client_data=0x22fbf640) at gdb/event-top.c:233 #41 0x0000000000cbee1c in stdin_event_handler (error=0, client_data=0x22fbf640) at gdb/ui.c:154 #42 0x000000000154ed60 in handle_file_event (file_ptr=0x232be730, ready_mask=1) at gdbsupport/event-loop.cc:572 #43 0x000000000154f21c in gdb_wait_for_event (block=1) at gdbsupport/event-loop.cc:693 #44 0x000000000154dec4 in gdb_do_one_event (mstimeout=-1) at gdbsupport/event-loop.cc:263 #45 0x0000000000910f98 in start_event_loop () at gdb/main.c:400 #46 0x0000000000911130 in captured_command_loop () at gdb/main.c:464 #47 0x0000000000912b5c in captured_main (data=0xfffff1a3db58) at gdb/main.c:1338 #48 0x0000000000912bf4 in gdb_main (args=0xfffff1a3db58) at gdb/main.c:1357 #49 0x00000000004170f4 in main (argc=10, argv=0xfffff1a3dcc8) at gdb/gdb.c:38 (gdb) ... The abort happens because a c++ exception escapes to c code, specifically opncls_bstat in bfd/opncls.c. Compiling with -fexceptions works around this. Fix this by catching the exception just before it escapes, in stat_trampoline and likewise in few similar spot. Add a new template catch_exceptions to do so in a consistent way. Tested on aarch64-linux. Approved-by: Pedro Alves <pedro@palves.net> PR remote/31577 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=31577
berenm
pushed a commit
that referenced
this pull request
Jul 31, 2024
Since commit b1da98a ("gdb: remove use of alloca in new_macro_definition"), if cached_argv is empty, we call macro_bcache with a nullptr data. This ends up caught by UBSan deep down in the bcache code: $ ./gdb -nx -q --data-directory=data-directory /home/smarchi/build/binutils-gdb/gdb/testsuite/outputs/gdb.base/macscp/macscp -readnow Reading symbols from /home/smarchi/build/binutils-gdb/gdb/testsuite/outputs/gdb.base/macscp/macscp... Expanding full symbols from /home/smarchi/build/binutils-gdb/gdb/testsuite/outputs/gdb.base/macscp/macscp... /home/smarchi/src/binutils-gdb/gdb/bcache.c:195:12: runtime error: null pointer passed as argument 2, which is declared to never be null The backtrace: #1 0x00007ffff619a05d in __ubsan::__ubsan_handle_nonnull_arg_abort (Data=<optimized out>) at ../../../../src/libsanitizer/ubsan/ubsan_handlers.cpp:750 #2 0x000055556337fba2 in gdb::bcache::insert (this=0x62d0000c8458, addr=0x0, length=0, added=0x0) at /home/smarchi/src/binutils-gdb/gdb/bcache.c:195 #3 0x0000555564b49222 in gdb::bcache::insert<char const*, void> (this=0x62d0000c8458, addr=0x0, length=0, added=0x0) at /home/smarchi/src/binutils-gdb/gdb/bcache.h:158 #4 0x0000555564b481fa in macro_bcache<char const*> (t=0x62100007ae70, addr=0x0, len=0) at /home/smarchi/src/binutils-gdb/gdb/macrotab.c:117 #5 0x0000555564b42b4a in new_macro_definition (t=0x62100007ae70, kind=macro_function_like, special_kind=macro_ordinary, argv=std::__debug::vector of length 0, capacity 0, replacement=0x62a00003af3a "__builtin_va_arg_pack ()") at /home/smarchi/src/binutils-gdb/gdb/macrotab.c:573 #6 0x0000555564b44674 in macro_define_internal (source=0x6210000ab9e0, line=469, name=0x7fffffffa710 "__va_arg_pack", kind=macro_function_like, special_kind=macro_ordinary, argv=std::__debug::vector of length 0, capacity 0, replacement=0x62a00003af3a "__builtin_va_arg_pack ()") at /home/smarchi/src/binutils-gdb/gdb/macrotab.c:777 #7 0x0000555564b44ae2 in macro_define_function (source=0x6210000ab9e0, line=469, name=0x7fffffffa710 "__va_arg_pack", argv=std::__debug::vector of length 0, capacity 0, replacement=0x62a00003af3a "__builtin_va_arg_pack ()") at /home/smarchi/src/binutils-gdb/gdb/macrotab.c:816 #8 0x0000555563f62fc8 in parse_macro_definition (file=0x6210000ab9e0, line=469, body=0x62a00003af2a "__va_arg_pack() __builtin_va_arg_pack ()") at /home/smarchi/src/binutils-gdb/gdb/dwarf2/macro.c:203 This can be reproduced by running gdb.base/macscp.exp. Avoid calling macro_bcache if the macro doesn't have any arguments. Change-Id: I33b5a7c3b3a93d5adba98983fcaae9c8522c383d
berenm
pushed a commit
that referenced
this pull request
Sep 9, 2024
The commit: commit c6b4867 Date: Thu Mar 30 19:21:22 2023 +0100 gdb: parse pending breakpoint thread/task immediately Introduce a use bug where the value of a temporary variable was being used after it had gone out of scope. This was picked up by the address sanitizer and would result in this error: (gdb) maintenance selftest create_breakpoint_parse_arg_string Running selftest create_breakpoint_parse_arg_string. ================================================================= ==2265825==ERROR: AddressSanitizer: stack-use-after-scope on address 0x7fbb08046511 at pc 0x000001632230 bp 0x7fff7c2fb770 sp 0x7fff7c2fb768 READ of size 1 at 0x7fbb08046511 thread T0 #0 0x163222f in create_breakpoint_parse_arg_string(char const*, std::unique_ptr<char, gdb::xfree_deleter<char> >*, int*, int*, int*, std::unique_ptr<char, gdb::xfree_deleter<char> >*, bool*) ../../src/gdb/break-cond-parse.c:496 #1 0x1633026 in test ../../src/gdb/break-cond-parse.c:582 #2 0x163391b in create_breakpoint_parse_arg_string_tests ../../src/gdb/break-cond-parse.c:649 #3 0x12cfebc in void std::__invoke_impl<void, void (*&)()>(std::__invoke_other, void (*&)()) /usr/include/c++/13/bits/invoke.h:61 #4 0x12cc8ee in std::enable_if<is_invocable_r_v<void, void (*&)()>, void>::type std::__invoke_r<void, void (*&)()>(void (*&)()) /usr/include/c++/13/bits/invoke.h:111 #5 0x12c81e5 in std::_Function_handler<void (), void (*)()>::_M_invoke(std::_Any_data const&) /usr/include/c++/13/bits/std_function.h:290 #6 0x18bb51d in std::function<void ()>::operator()() const /usr/include/c++/13/bits/std_function.h:591 #7 0x4193ef9 in selftests::run_tests(gdb::array_view<char const* const>, bool) ../../src/gdbsupport/selftest.cc:100 #8 0x21c2206 in maintenance_selftest ../../src/gdb/maint.c:1172 ... etc ... The problem was caused by three lines like this one: thread_info *thr = parse_thread_id (std::string (t.get_value ()).c_str (), &tmptok); After parsing the thread-id TMPTOK would be left pointing into the temporary string which had been created on this line. When on the next line we did this: gdb_assert (*tmptok == '\0'); The value of *TMPTOK is undefined. Fix this by creating the std::string earlier in the scope. Now the contents of the string will remain valid when we check *TMPTOK. The address sanitizer issue is now resolved.
berenm
pushed a commit
that referenced
this pull request
Sep 13, 2024
The binary provided with bug 32165 [1] has 36139 ELF sections. GDB crashes on it with (note that my GDB is build with -D_GLIBCXX_DEBUG=1: $ ./gdb -nx -q --data-directory=data-directory ./vmlinux Reading symbols from ./vmlinux... (No debugging symbols found in ./vmlinux) (gdb) info func /usr/include/c++/14.2.1/debug/vector:508: In function: std::debug::vector<_Tp, _Allocator>::reference std::debug::vector<_Tp, _Allocator>::operator[](size_type) [with _Tp = long unsigned int; _Allocator = std::allocator<long unsigned int>; reference = long unsigned int&; size_type = long unsigned int] Error: attempt to subscript container with out-of-bounds index -29445, but container only holds 36110 elements. Objects involved in the operation: sequence "this" @ 0x514000007340 { type = std::debug::vector<unsigned long, std::allocator<unsigned long> >; } The crash occurs here: #3 0x00007ffff5e334c3 in __GI_abort () at abort.c:79 #4 0x00007ffff689afc4 in __gnu_debug::_Error_formatter::_M_error (this=<optimized out>) at /usr/src/debug/gcc/gcc/libstdc++-v3/src/c++11/debug.cc:1320 #5 0x0000555561119a16 in std::__debug::vector<unsigned long, std::allocator<unsigned long> >::operator[] (this=0x514000007340, __n=18446744073709522171) at /usr/include/c++/14.2.1/debug/vector:508 #6 0x0000555562e288e8 in minimal_symbol::value_address (this=0x5190000bb698, objfile=0x514000007240) at /home/smarchi/src/binutils-gdb/gdb/symtab.c:517 #7 0x0000555562e5a131 in global_symbol_searcher::expand_symtabs (this=0x7ffff0f5c340, objfile=0x514000007240, preg=std::optional [no contained value]) at /home/smarchi/src/binutils-gdb/gdb/symtab.c:4983 #8 0x0000555562e5d2ed in global_symbol_searcher::search (this=0x7ffff0f5c340) at /home/smarchi/src/binutils-gdb/gdb/symtab.c:5189 #9 0x0000555562e5ffa4 in symtab_symbol_info (quiet=false, exclude_minsyms=false, regexp=0x0, kind=FUNCTION_DOMAIN, t_regexp=0x0, from_tty=1) at /home/smarchi/src/binutils-gdb/gdb/symtab.c:5361 #10 0x0000555562e6131b in info_functions_command (args=0x0, from_tty=1) at /home/smarchi/src/binutils-gdb/gdb/symtab.c:5525 That is, at this line of `minimal_symbol::value_address`, where `objfile->section_offsets` is an `std::vector`: return (CORE_ADDR (this->unrelocated_address ()) + objfile->section_offsets[this->section_index ()]); A section index of -29445 is suspicious. The minimal_symbol at play here is: (top-gdb) p m_name $1 = 0x521001de10af "_sinittext" So I restarted debugging, breaking on: (top-gdb) b general_symbol_info::set_section_index if $_streq("_sinittext", m_name) And I see that weird -29445 value: (top-gdb) frame #0 general_symbol_info::set_section_index (this=0x525000082390, idx=-29445) at /home/smarchi/src/binutils-gdb/gdb/symtab.h:611 611 { m_section = idx; } But going up one frame, the section index is 36091: (top-gdb) frame #1 0x0000555562426526 in minimal_symbol_reader::record_full (this=0x7ffff0ead560, name="_sinittext", copy_name=false, address=-2111475712, ms_type=mst_text, section=36091) at /home/smarchi/src/binutils-gdb/gdb/minsyms.c:1228 1228 msymbol->set_section_index (section); It seems like the problem is just that the type used for the section index (short) is not big enough. Change from short to int. If somebody insists, we could even go long long / int64_t, but I doubt it's necessary. With that fixed, I get: (gdb) info func All defined functions: Non-debugging symbols: 0xffffffff81000000 _stext 0xffffffff82257000 _sinittext 0xffffffff822b4ebb _einittext [1] https://sourceware.org/bugzilla/show_bug.cgi?id=32165 Change-Id: Icb1c3de9474ff5adef7e0bbbf5e0b67b279dee04 Reviewed-By: Tom de Vries <tdevries@suse.de> Reviewed-by: Keith Seitz <keiths@redhat.com>
farazs-github
referenced
this pull request
in MediaTek-Labs/binutils-gdb
Oct 18, 2024
When building gdb with gcc 12 and -fsanitize=threads while renabling background dwarf reading by setting dwarf_synchronous to false, I run into: ... (gdb) file amd64-watchpoint-downgrade Reading symbols from amd64-watchpoint-downgrade... (gdb) watch global_var ================== WARNING: ThreadSanitizer: data race (pid=20124) Read of size 8 at 0x7b80000500d8 by main thread: #0 cooked_index_entry::full_name(obstack*, bool) const cooked-index.c:220 #1 cooked_index::get_main_name(obstack*, language*) const cooked-index.c:735 #2 cooked_index_worker::wait(cooked_state, bool) cooked-index.c:559 #3 cooked_index::wait(cooked_state, bool) cooked-index.c:631 #4 cooked_index_functions::wait(objfile*, bool) cooked-index.h:729 #5 cooked_index_functions::compute_main_name(objfile*) cooked-index.h:806 #6 objfile::compute_main_name() symfile-debug.c:461 #7 find_main_name symtab.c:6503 #8 main_language() symtab.c:6608 bminor#9 set_initial_language_callback symfile.c:1634 bminor#10 get_current_language() language.c:96 ... Previous write of size 8 at 0x7b80000500d8 by thread T1: #0 cooked_index_shard::finalize(parent_map_map const*) \ dwarf2/cooked-index.c:409 #1 operator() cooked-index.c:663 ... ... SUMMARY: ThreadSanitizer: data race cooked-index.c:220 in \ cooked_index_entry::full_name(obstack*, bool) const ================== Hardware watchpoint 1: global_var (gdb) PASS: gdb.arch/amd64-watchpoint-downgrade.exp: watch global_var ... This was also reported in PR31715. This is due do gcc PR110799 [1], generating wrong code with -fhoist-adjacent-loads, and causing a false positive for -fsanitize=threads. Work around the gcc PR by forcing -fno-hoist-adjacent-loads for gcc <= 13 and -fsanitize=threads. Tested in that same configuration on x86_64-linux. Remaining ThreadSanitizer problems are the ones reported in PR31626 (gdb.rust/dwindex.exp) and PR32247 (gdb.trace/basic-libipa.exp). PR gdb/31715 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=31715 Tested-By: Bernd Edlinger <bernd.edlinger@hotmail.de> Approved-By: Tom Tromey <tom@tromey.com> [1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=110799
Clownsw
pushed a commit
to Clownsw/binutils-gdb
that referenced
this pull request
Nov 3, 2024
On Windows gcore is not implemented, and if you try it, you get an heap-use-after-free error: (gdb) gcore C:/gdb/build64/gdb-git-python3/gdb/testsuite/outputs/gdb.base/gcore-buffer-overflow/gcore-buffer-overflow.test warning: cannot close "================================================================= ==10108==ERROR: AddressSanitizer: heap-use-after-free on address 0x1259ea503110 at pc 0x7ff6806e3936 bp 0x0062e01ed990 sp 0x0062e01ed140 READ of size 111 at 0x1259ea503110 thread T0 #0 0x7ff6806e3935 in strlen C:/gcc/src/gcc-14.2.0/libsanitizer/sanitizer_common/sanitizer_common_interceptors.inc:391 bminor#1 0x7ff6807169c4 in __pformat_puts C:/gcc/src/mingw-w64-v12.0.0/mingw-w64-crt/stdio/mingw_pformat.c:558 bminor#2 0x7ff6807186c1 in __mingw_pformat C:/gcc/src/mingw-w64-v12.0.0/mingw-w64-crt/stdio/mingw_pformat.c:2514 bminor#3 0x7ff680713614 in __mingw_vsnprintf C:/gcc/src/mingw-w64-v12.0.0/mingw-w64-crt/stdio/mingw_vsnprintf.c:41 bminor#4 0x7ff67f34419f in vsnprintf(char*, unsigned long long, char const*, char*) C:/msys64/mingw64/x86_64-w64-mingw32/include/stdio.h:484 bminor#5 0x7ff67f34419f in string_vprintf[abi:cxx11](char const*, char*) C:/gdb/src/gdb.git/gdbsupport/common-utils.cc:106 bminor#6 0x7ff67b37b739 in cli_ui_out::do_message(ui_file_style const&, char const*, char*) C:/gdb/src/gdb.git/gdb/cli-out.c:227 bminor#7 0x7ff67ce3d030 in ui_out::call_do_message(ui_file_style const&, char const*, ...) C:/gdb/src/gdb.git/gdb/ui-out.c:571 bminor#8 0x7ff67ce4255a in ui_out::vmessage(ui_file_style const&, char const*, char*) C:/gdb/src/gdb.git/gdb/ui-out.c:740 bminor#9 0x7ff67ce2c873 in ui_file::vprintf(char const*, char*) C:/gdb/src/gdb.git/gdb/ui-file.c:73 bminor#10 0x7ff67ce7f83d in gdb_vprintf(ui_file*, char const*, char*) C:/gdb/src/gdb.git/gdb/utils.c:1881 bminor#11 0x7ff67ce7f83d in vwarning(char const*, char*) C:/gdb/src/gdb.git/gdb/utils.c:181 bminor#12 0x7ff67f3530eb in warning(char const*, ...) C:/gdb/src/gdb.git/gdbsupport/errors.cc:33 #13 0x7ff67baed27f in gdb_bfd_close_warning C:/gdb/src/gdb.git/gdb/gdb_bfd.c:437 #14 0x7ff67baed27f in gdb_bfd_close_or_warn C:/gdb/src/gdb.git/gdb/gdb_bfd.c:646 #15 0x7ff67baed27f in gdb_bfd_unref(bfd*) C:/gdb/src/gdb.git/gdb/gdb_bfd.c:739 #16 0x7ff68094b6f2 in gdb_bfd_ref_policy::decref(bfd*) C:/gdb/src/gdb.git/gdb/gdb_bfd.h:82 #17 0x7ff68094b6f2 in gdb::ref_ptr<bfd, gdb_bfd_ref_policy>::~ref_ptr() C:/gdb/src/gdb.git/gdbsupport/gdb_ref_ptr.h:91 #18 0x7ff67badf4d2 in gcore_command C:/gdb/src/gdb.git/gdb/gcore.c:176 0x1259ea503110 is located 16 bytes inside of 4064-byte region [0x1259ea503100,0x1259ea5040e0) freed by thread T0 here: #0 0x7ff6806b1687 in free C:/gcc/src/gcc-14.2.0/libsanitizer/asan/asan_malloc_win.cpp:90 bminor#1 0x7ff67f2ae807 in objalloc_free C:/gdb/src/gdb.git/libiberty/objalloc.c:187 bminor#2 0x7ff67d7f56e3 in _bfd_free_cached_info C:/gdb/src/gdb.git/bfd/opncls.c:247 bminor#3 0x7ff67d7f2782 in _bfd_delete_bfd C:/gdb/src/gdb.git/bfd/opncls.c:180 bminor#4 0x7ff67d7f5df9 in bfd_close_all_done C:/gdb/src/gdb.git/bfd/opncls.c:960 bminor#5 0x7ff67d7f62ec in bfd_close C:/gdb/src/gdb.git/bfd/opncls.c:925 bminor#6 0x7ff67baecd27 in gdb_bfd_close_or_warn C:/gdb/src/gdb.git/gdb/gdb_bfd.c:643 bminor#7 0x7ff67baecd27 in gdb_bfd_unref(bfd*) C:/gdb/src/gdb.git/gdb/gdb_bfd.c:739 bminor#8 0x7ff68094b6f2 in gdb_bfd_ref_policy::decref(bfd*) C:/gdb/src/gdb.git/gdb/gdb_bfd.h:82 bminor#9 0x7ff68094b6f2 in gdb::ref_ptr<bfd, gdb_bfd_ref_policy>::~ref_ptr() C:/gdb/src/gdb.git/gdbsupport/gdb_ref_ptr.h:91 bminor#10 0x7ff67badf4d2 in gcore_command C:/gdb/src/gdb.git/gdb/gcore.c:176 It happens because gdb_bfd_close_or_warn uses a bfd-internal name for the failing-close warning, after the close is finished, and the name already freed: static int gdb_bfd_close_or_warn (struct bfd *abfd) { int ret; const char *name = bfd_get_filename (abfd); for (asection *sect : gdb_bfd_sections (abfd)) free_one_bfd_section (sect); ret = bfd_close (abfd); if (!ret) gdb_bfd_close_warning (name, bfd_errmsg (bfd_get_error ())); return ret; } Fixed by making a copy of the name for the warning. Approved-By: Andrew Burgess <aburgess@redhat.com>
TogekissTube
pushed a commit
to TogekissTube/binutils-gdb
that referenced
this pull request
Dec 29, 2024
This commit adds support for a `gstack' command which Fedora has been carrying for many years. gstack is a natural counterpart to the gcore command. Whereas gcore dumps a core file, gstack prints stack traces of a running process. There are many improvements over Fedora's version of this script. The dependency on procfs is gone; gstack will run anywhere gdb runs. The only runtime dependencies are bash and awk. The script includes suggestions from gdb/32325 to include versioning and help. [If this approach to gdb/32325 is acceptable, I could propagate the solution to gcore/gdb-add-index.] I've rewritten the documentation, integrating it into the User Manual. The manpage is now output using this one source. Example run (on x86_64 Fedora 40) $ gstack --help Usage: gstack [-h|--help] [-v|--version] PID Print a stack trace of a running program -h, --help Print this message then exit. -v, --version Print version information then exit. $ gstack -v GNU gstack (GDB) 16.0.50.20241119-git $ gstack 12345678 Process 12345678 not found. $ gstack $(pidof emacs) Thread 6 (Thread 0x7fd5ec1c06c0 (LWP 2491423) "pool-spawner"): #0 0x00007fd6015ca3dd in syscall () at /lib64/libc.so.6 bminor#1 0x00007fd60b31eccd in g_cond_wait () at /lib64/libglib-2.0.so.0 bminor#2 0x00007fd60b28a61b in g_async_queue_pop_intern_unlocked () at /lib64/libglib-2.0.so.0 bminor#3 0x00007fd60b2f1a03 in g_thread_pool_spawn_thread () at /lib64/libglib-2.0.so.0 bminor#4 0x00007fd60b2f0813 in g_thread_proxy () at /lib64/libglib-2.0.so.0 bminor#5 0x00007fd6015486d7 in start_thread () at /lib64/libc.so.6 bminor#6 0x00007fd6015cc60c in clone3 () at /lib64/libc.so.6 bminor#7 0x0000000000000000 in ??? () Thread 5 (Thread 0x7fd5eb9bf6c0 (LWP 2491424) "gmain"): #0 0x00007fd6015be87d in poll () at /lib64/libc.so.6 bminor#1 0x0000000000000001 in ??? () bminor#2 0xffffffff00000001 in ??? () bminor#3 0x0000000000000001 in ??? () bminor#4 0x000000002104cfd0 in ??? () bminor#5 0x00007fd5eb9be320 in ??? () bminor#6 0x00007fd60b321c34 in g_main_context_iterate_unlocked.isra () at /lib64/libglib-2.0.so.0 Thread 4 (Thread 0x7fd5eb1be6c0 (LWP 2491425) "gdbus"): #0 0x00007fd6015be87d in poll () at /lib64/libc.so.6 bminor#1 0x0000000020f9b558 in ??? () bminor#2 0xffffffff00000003 in ??? () bminor#3 0x0000000000000003 in ??? () bminor#4 0x00007fd5d8000b90 in ??? () bminor#5 0x00007fd5eb1bd320 in ??? () bminor#6 0x00007fd60b321c34 in g_main_context_iterate_unlocked.isra () at /lib64/libglib-2.0.so.0 Thread 3 (Thread 0x7fd5ea9bd6c0 (LWP 2491426) "emacs"): #0 0x00007fd6015ca3dd in syscall () at /lib64/libc.so.6 bminor#1 0x00007fd60b31eccd in g_cond_wait () at /lib64/libglib-2.0.so.0 bminor#2 0x00007fd60b28a61b in g_async_queue_pop_intern_unlocked () at /lib64/libglib-2.0.so.0 bminor#3 0x00007fd60b28a67c in g_async_queue_pop () at /lib64/libglib-2.0.so.0 bminor#4 0x00007fd603f4d0d9 in fc_thread_func () at /lib64/libpangoft2-1.0.so.0 bminor#5 0x00007fd60b2f0813 in g_thread_proxy () at /lib64/libglib-2.0.so.0 bminor#6 0x00007fd6015486d7 in start_thread () at /lib64/libc.so.6 bminor#7 0x00007fd6015cc60c in clone3 () at /lib64/libc.so.6 bminor#8 0x0000000000000000 in ??? () Thread 2 (Thread 0x7fd5e9e6d6c0 (LWP 2491427) "dconf worker"): #0 0x00007fd6015be87d in poll () at /lib64/libc.so.6 bminor#1 0x0000000000000001 in ??? () bminor#2 0xffffffff00000001 in ??? () bminor#3 0x0000000000000001 in ??? () bminor#4 0x00007fd5cc000b90 in ??? () bminor#5 0x00007fd5e9e6c320 in ??? () bminor#6 0x00007fd60b321c34 in g_main_context_iterate_unlocked.isra () at /lib64/libglib-2.0.so.0 Thread 1 (Thread 0x7fd5fcc45280 (LWP 2491417) "emacs"): #0 0x00007fd6015c9197 in pselect () at /lib64/libc.so.6 bminor#1 0x0000000000000000 in ??? () Since this is essentially a complete rewrite of the original script and documentation, I've chosen to only keep a 2024 copyright date. Reviewed-By: Eli Zaretskii <eliz@gnu.org> Approved-By: Tom Tromey <tom@tromey.com>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
This PR presents the comprehensive implementation of the event-load extension for CORE-V, in preparation for upstream.
I will test it using the standard riscv-gnu-toolchain on the binutils, ld, gas and gcc testsuites and post test results here. Therefore, not ready.