Skip to content

borgmatic-collective/docker-borgmatic

Repository files navigation

borgmatic Container

Description

This repository provides a Docker image for borgmatic, a simple and efficient backup tool based on Borgbackup. The image is designed to make it easy to set up and run borgmatic (with Borg and optionally Cron daemon) within a Docker container, enabling you to streamline your backup process and ensure the safety of your data.

Warning As of 2022-01-29 this image has switched to use Supercronic instead of cron from alpine

Warning As of 2023-06-23 msmtp and ntfy flavors have been discontinued. This image has now switched to apprise.

Usage

Prerequisites

Before proceeding, ensure that you have Docker installed and properly configured on your system. Refer to the Docker documentation for installation instructions specific to your operating system. If you want to use docker-compose, you may also need to install it seperately. Alternatively, you can also use podman to run this image.

Getting Started

Run this command to create data directories required by this image under your prefered directory.

mkdir data/{borgmatic.d,repository,.config,.ssh,.cache}

Configure a copy of borgmatic's config.yaml in data/borgmatic.d and run the container. You can modify any of the host mount point to fit your backup configuration.

docker run \
  --detach --name borgmatic \
  -v /home:/mnt/source:ro \
  -v ./data/repository:/mnt/borg-repository \
  -v ./data/borgmatic.d:/etc/borgmatic.d/ \
  -v ./data/.config/borg:/root/.config/borg \
  -v ./data/.ssh:/root/.ssh \
  -v ./data/.cache/borg:/root/.cache/borg \
  -e TZ=Europe/Berlin \
  ghcr.io/borgmatic-collective/borgmatic

See Other usage methods below for more options.

Running the container the first time

When you run the container for the first time, you'll need to execute into the container and run a command to initialize the repository in the directory you've specified in your docker configuration:

docker exec -it borgmatic /bin/sh
borgmatic init --encryption repokey

In addition, it may be a good idea to manually perform a backup to ensure everything performs as expected:

docker exec -it borgmatic /bin/sh
borgmatic --stats -v 1 --files

Both these commands will use the borgmatic.d/config.yaml file you provided, along with the BORG_PASSPHRASE and other environment variables in your docker configuration.

Volumes

The following volumes are available for mounting:

Volume Description
/mnt/source Your data you wish to backup. For some safety you may want to mount read-only. borgmatic is running as root so all files can be backed up.
/mnt/borg-repository Mount your borg backup repository here.
/etc/borgmatic.d Where you need to create crontab.txt and your borgmatic config.yml
/root/.borgmatic Note this is now redundant and has been deprecated, please remove this from your configs
/root/.config/borg Here the borg config and keys for keyfile encryption modes are stored. Make sure to backup your keyfiles! Also needed when encryption is set to none.
/root/.ssh Mount either your own .ssh here or create a new one with ssh keys in for your remote repo locations.
/root/.cache/borg A non-volatile place to store the borg chunk cache.

To generate an example borgmatic configuration, run:

docker exec borgmatic \
bash -c "cd && borgmatic config generate -d /etc/borgmatic.d/config.yaml"

Environment

You can set the following environment variables:

Variable Description
TZ Time zone, e.g. TZ="Europe/Berlin"'.
BORG_RSH SSH parameters, e.g. BORG_RSH="ssh -i /root/.ssh/id_ed25519 -p 50221"
BORG_PASSPHRASE Repository passphrase, e.g. BORG_PASSPHRASE="DonNotMissToChangeYourPassphrase"
BACKUP_CRON Cron schedule to run borgmatic. Default:0 1 * * *
RUN_ON_STARTUP Run borgmatic on startup. e.g.: RUN_ON_STARTUP=true

You can also provide your own crontab file. If data/borgmatic.d/crontab.txt exists, BACKUP_CRON will be ignored in preference to it. In here you can add any other tasks you want ran

0 1 * * * PATH=$PATH:/usr/local/bin /usr/local/bin/borgmatic --stats -v 0 2>&1

Beside that, you can also pass any environment variable that is supported by borgmatic. See documentation for borgmatic and Borg and for a list of supported variables.

Using Secrets (Optional)

You also have the option of using Docker Secrets for more sensitive information. This is not mandatory, but provides an additional layer of security. Note that this function is only applicable to environment variables that start with BORG or YOUR.

For each environment variable such as BORG_PASSPHRASE, you can create a corresponding secret file called BORG_PASSPHRASE_FILE. Store the contents of the secret file in this file. The start script automatically searches for corresponding _FILE secrets if the environment variables are not set and loads them.

It is important to know that this environment variable is not available via docker compose exec borgmatic sh. Only for the automated call via the defined cron.

Using Apprise for Notifications

To enhance your experience with Borgmatic, we'll show you a quick example of how to use Apprise for notifications. Apprise is a versatile tool that integrates with a variety of services and is built into Borgmatic. With the upcoming version 1.8.4 also natively. Here's a quick example of how you can use Apprise.

Basic Setup

Cronjob Configuration

In an unmodified Borgmatic installation, your cronjob.txt might look something like this:

0 1 * * * /usr/local/bin/borgmatic --stats -v 0 2>&1

To incorporate Apprise notifications, you can modify it like this:

*/5 * * * * PATH=$PATH:/usr/local/bin /usr/local/bin/borgmatic --stats -v 0 > /tmp/backup_run.log

Borgmatic Configuration

Add the following lines to your Borgmatic configuration file (config.yaml):

before_backup:
  - echo "Starting a backup job."

after_backup:
  - echo "Backup created."
  - apprise -vv -t "✅ SUCCESS" -b "$(cat /tmp/backup_run.log)" "mailtos://smtp.example.com:587?user=server@example.com&pass=YourSecurePassword&from=server@example.com&to=receiver@example.com"

on_error:
  - echo "Error while creating a backup."
  - apprise -vv -t "❌ FAILED" -b "$(cat /tmp/backup_run.log)" "mailtos://smtp.example.com:587?user=server@example.com&pass=YourSecurePassword&from=server@example.com&to=receiver@example.com"
Note:

If you don't want to send the log file, you can replace -b "$(cat /tmp/backup_run.log)" with a custom message like -b "My message".

Advanced Options

Apprise Capabilities

Apprise offers a variety of services to send notifications to, such as Telegram, Slack, Discord, and many more. For a complete list, visit the Apprise GitHub page.

Example for Multiple Services

Apprise allows you to notify multiple services at the same time:

after_backup:
  - echo "Backup created."
  - apprise -vv -t "✅ SUCCESS" -b "$(cat /tmp/backup_run.log)" "mailtos://smtp.example.com:587?user=server@example.com&pass=YourSecurePassword&from=server@example.com&to=receiver@example.com,slack://token@Txxxx/Bxxxx/Cxxxx"

Native Apprise Configuration in Borgmatic 1.8.4+

Starting from version 1.8.4, Borgmatic has native support for Apprise within its configuration. This makes it even easier to set up notifications. Below is how you can add Apprise directly to your Borgmatic config.yaml.

apprise:
    states:
        - start
        - finish
        - fail

    services:
        - url: mailtos://smtp.example.com:587?user=server@example.com&pass=YourSecurePassword&from=server@example.com&to=receiver@example.com
          label: mail
        - url: slack://token@Txxxx/Bxxxx/Cxxxx
          label: slack

    start:
        title: ⚙️ Started
        body: Starting backup process.

    finish:
        title: ✅ SUCCESS
        body: Backups successfully made.

    fail:
        title: ❌ FAILED
        body: Your backups have failed.

And as of borgmatic 1.8.9+, borgmatic's logs are automatically appended to the body for each notification.

Conclusion

Apprise provides a flexible and powerful way to handle notifications in Borgmatic. Be sure to check out the official Apprise documentation for a full range of options and capabilities.

Other usage methods

Run borgmatic like a binary through a container

This image can be used to run borgmatic like a binary by passing the borgmatic command while running the container. It allows you to isolate your system and execute borgmatic commands without directly installing borgmatic on your host system and only keeping persistent data.

To execute borgmatic commands, you can run your container by passing borgmatic subcommands:

docker run --rm -it \
MOUNT_FLAGS_HERE \
ghcr.io/borgmatic-collective/borgmatic \
list

NOTE Replace MOUNT_FLAGS_HERE placeholder with appropriate mount flags and optionally environment flags. See above for more clues.

This will execute borgmatic list in your container. The idea is to create symlink to a script which executes this. Now create a new file borgmatic-docker.sh somewhere like your workspace or home directory.

#!/bin/sh

docker run --rm -it \
MOUNT_FLAGS_HERE \
ghcr.io/borgmatic-collective/borgmatic \
"$@"

Modify the above script as per your needs and copy it's path. Now you can either create a symbolic link to this script or add it as alias.

  1. Create a symlink to a directory that exists in your PATH variable e.g.:
chmod +x /path/to/script/borgmatic-docker.sh
sudo ln [-s] /path/to/script/borgmatic-docker.sh /usr/local/bin/borgmatic
  1. Or, to create an alias add this to your ~/.bashrc or similar file for other shells.
alias borgmatic="sh /path/to/script/borgmatic-docker.sh"

Tip You can view list of available command line options in borgmatic's docs

Running as daemon

To keep the container always running for continous backup, you can run it in detached mode. If you do not pass the command, by default it'll start the cron daemon which will run borgmatic at interval set in crontab.txt file.

docker run -d --restart=always \
MOUNT_FLAGS_HERE \
ghcr.io/borgmatic-collective/borgmatic \

If you ever need to run borgmatic manually, for instance to view or recover files, run:

docker exec -it container_id_or_name bash

Then you can run borgmatic directly within that shell.

Structure deployment with docker-compose

Use docker compose for easily management of your borgmatic container. You can also use this image with your existing docker-compose configuration to immediate setup backups for your deployed containers and/or the host.

  1. Copy .env.template to .env and edit it to your needs.
cp .env.template .env

You will need to configure environment variables for volumes. You can also directly configure docker-compose.yml file.

Beside these, you can also set other configuration variables in your .env file. See Environment section for more details.

  1. Start the container
docker-compose up -d
  1. To view logs
docker-compose logs -f

Miscelaneous

If you want to run borgmatic commands using this configuration instead of starting the container as daemon, you can run:

docker-compose run --rm borgmatic borgmatic list

If a container is already running, you can execute borgmatic commands in it by running:

docker-compose exec borgmatic ls
# or to run a shell
docker-compose exec borgmatic bash

Restoring backups

  1. Stop the backup container: docker-compose down
  2. Modify volume /host/mount/location in docker-compose.restore.yml file to point to the location where you want to restore your backup.
  3. Run an interactive shell: docker-compose -f docker-compose.yml -f docker-compose.restore.yml run borgmatic
  4. Fuse-mount the backup: borg mount /mnt/borg-repository <mount_point>
  5. Restore your files
  6. Finally unmount and exit: borg umount <mount_point> && exit.

Tip In case Borg fails to create/acquire a lock: borg break-lock /mnt/repository

Advanced

Starting and stopping containers from hooks

In case you are using the container to backup docker volumes used by other containers, you might want to make sure that the data is consistent and doesn't change while the backup is running. The easiest way to ensure this is to stop the affected containers before the backup and restart them afterwards. You can use the appropriate borgmatic hooks and control the docker engine through the API using the hosts docker socket.

Please note that you might want to prefer the *_everything hooks to the *_backup hooks, as after_backup will not run if the backup fails for any reason (missing disk space, etc.) and therefore the containers stay stopped.

First mount the docker socket from the host by adding -v /var/run/docker.sock:/var/run/docker.sock to your run command or in the volume list of your docker-compose.yml.

Then use the following example to create the start/stop hooks in the config.yml for the containers that you want to control.

hooks:
    before_everything:
        - echo "Stopping containers..."
        - 'echo -ne "POST /v1.41/containers/<container1-name>/stop HTTP/1.1\r\nHost: localhost\r\n\r\n" | nc local:/var/run/docker.sock 80 > /dev/null && echo "Stopped Container 1" || echo "Failed to stop Container 1"'
        - 'echo -ne "POST /v1.41/containers/<container2-name>/stop HTTP/1.1\r\nHost: localhost\r\n\r\n" | nc local:/var/run/docker.sock 80 > /dev/null && echo "Stopped Container 2" || echo "Failed to stop Container 2"'
        - echo "Containers stopped."
        - echo "Starting a backup."

    after_everything:
        - echo "Finished a backup."
        - echo "Restarting containers..."
        - 'echo -ne "POST /v1.41/containers/<container1-name>/start HTTP/1.1\r\nHost: localhost\r\n\r\n" | nc local:/var/run/docker.sock 80 > /dev/null && echo "Started Container 1" || echo "Failed to start Container 1"'
        - 'echo -ne "POST /v1.41/containers/<container2-name>/start HTTP/1.1\r\nHost: localhost\r\n\r\n" | nc local:/var/run/docker.sock 80 > /dev/null && echo "Started Container 2" || echo "Failed to start Container 2"'
        - echo "Containers restarted."

Mount an archive as FUSE filesystem

While the parameters defined in above examples are sufficient for regular backups, following additional privileges will be needed to mount an archive as FUSE filesystem:

--cap-add SYS_ADMIN \
--device /dev/fuse \
--security-opt label:disable \
--security-opt apparmor:unconfined

Depending on your security system, --security-opt parameters may not be necessary. label:disable is needed for SELinux, while apparmor:unconfined is needed for AppArmor.

To init the repo with encryption, run:

docker exec borgmatic \
bash -c "borgmatic --init --encryption repokey-blake2"

Additional Reading

Backup Docker using borgmatic - Thank you @modem7