Support for ARM SVE to instrinsics MPI_Op

Add readme, install and plot scripts

Signed-off-by: dongzhong <zhongdong0321@hotmail.com>

ARM_SVE_README

@@ -0,0 +1,30 @@
+Configuration and installation details please check script arm_install.sh
+
+Run test: (Test example takes 4 args)
+arg1 :  elements count for operation
+arg2 :  elements type could be : i (integer), f (float), d (double) 
+arg3:   type size in bits, only apply when you set arg2 to i.  eg: i 8 will be converted to int8;  i 16 to int16
+arg4:   operation type. Could be : max, min, sum , mul, band , bor,  bxor
+If you want to use SVE module for MPI ops, you need to pass mca params as : -mca op sve -mca op_sve_hardware_available 1
+=======
+Example for test
+$PATH_To_BIN/mpirun -mca op sve -mca op_sve_hardware_available 1 -mca pml ob1  -np 1  armie -msve-vector-bits=256 --iclient libinscount_emulated.so  --unsafe-ldstex   --  /ccsopen/home/dzhong/Downloads/github/intel_to_arm/ompi/test/datatype/Reduce_local_float 33 i 8 min 
+
+If you don't need armie you can remove the ARMIE part in the command line as : 
+$PATH_To_BIN//mpirun -mca op sve -mca op_sve_hardware_available 1 -mca pml ob1  -np 1 /ompi/test/datatype/Reduce_local_float 33 i 8 min 
+
+How we evaluate the performance?
+======
+Logical:
+
+Start_time;
+MPI_reduce_local(...);
+End_time;
+
+Reduce_time = Start_time - End_time;
+
+Possible issues (this happened on thunder2 machine):
+======
+Reason for "-mca pml ob1" : on Arm machine the default pml module will cause a problem with armie (instruction not supported, I don't know why), but with ob1 it works.
+
+

arm_install.sh

@@ -0,0 +1,11 @@
+mkdir build
+
+./autogen.pl >/dev/null
+
+./configure --prefix=$PWD/build --enable-mpirun-prefix-by-default --enable-debug CC=armclang CFLAGS="-march=armv8-a+sve" CXX=armclang++ FC=armflang >/dev/null
+
+./config.status >/dev/null
+make -j 128 install >/dev/null
+
+## compile the test code, test code under ompi/test/datapyte/Reduce_local_float.c
+./build/bin/mpicc  -g  -O3 -march=armv8-a+sve  -o ./test/datatype/Reduce_local_float ./test/datatype/Reduce_local_float.c

ompi/mca/op/Makefile.am

@@ -2,7 +2,7 @@
 # Copyright (c) 2004-2005 The Trustees of Indiana University and Indiana
 #                         University Research and Technology
 #                         Corporation.  All rights reserved.
-# Copyright (c) 2004-2005 The University of Tennessee and The University
+# Copyright (c) 2004-2020 The University of Tennessee and The University
 #                         of Tennessee Research Foundation.  All rights
 #                         reserved.
 # Copyright (c) 2004-2005 High Performance Computing Center Stuttgart,
@@ -17,6 +17,8 @@
 # $HEADER$
 #
 
+AM_CPPFLAGS = $(LTDLINCL)
+
 # main library setup
 noinst_LTLIBRARIES = libmca_op.la
 libmca_op_la_SOURCES =

ompi/mca/op/sve/Makefile.am

@@ -0,0 +1,70 @@
+#
+# Copyright (c) 2019      The University of Tennessee and The University
+#                         of Tennessee Research Foundation.  All rights
+#                         reserved.
+# $COPYRIGHT$
+#
+# Additional copyrights may follow
+#
+# $HEADER$
+#
+
+# This is an sve op component.  This Makefile.am is a typical
+# sve of how to integrate into Open MPI's Automake-based build
+# system.
+#
+# See https://github.com/open-mpi/ompi/wiki/devel-CreateComponent
+# for more details on how to make Open MPI components.
+
+# First, list all .h and .c sources.  It is necessary to list all .h
+# files so that they will be picked up in the distribution tarball.
+
+sources = \
+    op_sve.h \
+    op_sve_component.c \
+    op_sve_functions.h \
+    op_sve_functions.c
+
+# Open MPI components can be compiled two ways:
+#
+# 1. As a standalone dynamic shared object (DSO), sometimes called a
+# dynamically loadable library (DLL).
+#
+# 2. As a static library that is slurped up into the upper-level
+# libmpi library (regardless of whether libmpi is a static or dynamic
+# library).  This is called a "Libtool convenience library".
+#
+# The component needs to create an output library in this top-level
+# component directory, and named either mca_<type>_<name>.la (for DSO
+# builds) or libmca_<type>_<name>.la (for static builds).  The OMPI
+# build system will have set the
+# MCA_BUILD_ompi_<framework>_<component>_DSO AM_CONDITIONAL to indicate
+# which way this component should be built.
+
+if MCA_BUILD_ompi_op_arm_sve_op_DSO
+component_noinst =
+component_install = mca_op_sve.la
+else
+component_install =
+component_noinst = component_noinst
+endif
+
+# Specific information for DSO builds.
+#
+# The DSO should install itself in $(ompilibdir) (by default,
+# $prefix/lib/openmpi).
+
+mcacomponentdir = $(ompilibdir)
+mcacomponent_LTLIBRARIES = $(component_install)
+mca_op_sve_la_SOURCES = $(sources)
+mca_op_sve_la_LDFLAGS = -module -avoid-version
+mca_op_sve_la_LIBADD = $(top_builddir)/ompi/lib@OMPI_LIBMPI_NAME@.la
+
+# Specific information for static builds.
+#
+# Note that we *must* "noinst"; the upper-layer Makefile.am's will
+# slurp in the resulting .la library into libmpi.
+
+noinst_LTLIBRARIES = $(component_noinst)
+libmca_op_sve_la_SOURCES = $(sources)
+libmca_op_sve_la_LDFLAGS = -module -avoid-version

ompi/mca/op/sve/configure.m4

@@ -0,0 +1,21 @@
+# -*- shell-script -*-
+#
+# Copyright (c) 2019-2020 The University of Tennessee and The University
+#                         of Tennessee Research Foundation.  All rights
+#                         reserved.
+#
+# $COPYRIGHT$
+#
+# Additional copyrights may follow
+#
+# $HEADER$
+#
+
+# MCA_ompi_op_sve_CONFIG([action-if-can-compile],
+#		         [action-if-cant-compile])
+# ------------------------------------------------
+# We can always build, unless we were explicitly disabled.
+AC_DEFUN([MCA_ompi_op_sve_CONFIG],[
+    AC_CONFIG_FILES([ompi/mca/op/sve/Makefile])
+           [$1],
+])dnl

ompi/mca/op/sve/op_sve.h

@@ -0,0 +1,64 @@
+/*
+ * Copyright (c) 2019      The University of Tennessee and The University
+ *                         of Tennessee Research Foundation.  All rights
+ *                         reserved.
+ *
+ * Copyright (c) 2019      Arm Ltd.  All rights reserved.
+ *
+ * $COPYRIGHT$
+ *
+ * Additional copyrights may follow
+ *
+ * $HEADER$
+ */
+
+#ifndef MCA_OP_SVE_EXPORT_H
+#define MCA_OP_SVE_EXPORT_H
+
+#include "ompi_config.h"
+
+#include "ompi/mca/mca.h"
+#include "opal/class/opal_object.h"
+
+#include "ompi/mca/op/op.h"
+
+BEGIN_C_DECLS
+
+/**
+ * Derive a struct from the base op component struct, allowing us to
+ * cache some component-specific information on our well-known
+ * component struct.
+ */
+typedef struct {
+    /** The base op component struct */
+    ompi_op_base_component_1_0_0_t super;
+
+    /* What follows is sve-component-specific cached information.  We
+       tend to use this scheme (caching information on the sve
+       component itself) instead of lots of individual global
+       variables for the component.  The following data fields are
+       sves; replace them with whatever is relevant for your
+       component. */
+
+    /** A simple boolean indicating that the hardware is available. */
+    bool hardware_available;
+
+    /** A simple boolean indicating whether double precision is
+        supported. */
+    bool double_supported;
+} ompi_op_sve_component_t;
+
+/**
+ * Globally exported variable.  Note that it is a *sve* component
+ * (defined above), which has the ompi_op_base_component_t as its
+ * first member.  Hence, the MCA/op framework will find the data that
+ * it expects in the first memory locations, but then the component
+ * itself can cache additional information after that that can be used
+ * by both the component and modules.
+ */
+OMPI_DECLSPEC extern ompi_op_sve_component_t
+    mca_op_sve_component;
+
+END_C_DECLS
+
+#endif /* MCA_OP_SVE_EXPORT_H */