Gladys-Sonoff

Gladys hooks to control Sonoff over http or mqtt.

Need Gladys version >= 3.0.0.

Prerequisites

To use this module, you must flash your Sonoff module with this firmware:
https://github.com/arendst/Sonoff-Tasmota

Documentation

To install this module:

On the Module / Advanced Gladys screen, manually install the module with the following information:
Name: Sonoff
Version: 0.1.0
URL: https://github.com/NicolasD-62/gladys-sonoff.git
Slug: sonoff

Restart Gladys

To manually add a device:

On the Gladys Devices screen, add a new device with the following information:
Name: What you want
Identifier:

• for HTTP : IP of the Sonoff (if device has more then 1 switch, add switch number: IP_1, IP_2, ...)
• for MQTT : %topic% (of the sonoff config screen) (if device has more then 1 switch, add switch number: %topic%_1, %topic%_2, ...)

Protocol: http or mqtt
Service: sonoff
Room: Where is the Sonoff

Then edit this device and add a devicetype with the following information:
Identifier: Power
Type: binary
Unity: binary
Min: 0
Max: 1

If you want to use the Sonoff module with the MQTT protocol, config it like this:
Host: Your MQTT server
Port: Your MQTT server port
Client: Unique name of the Sonoff
User: User name
Password: User password
Topic: Unique topic name (same as the Identifier in Gladys)
Full Topic: Leave %prefix%/%topic%/