Apprise API

Take advantage of Apprise through your network with a user-friendly API.

• Send notifications to more than 100+ services.
• An incredibly lightweight gateway to Apprise.
• A production ready micro-service at your disposal.
• A Simple Website to verify and test your configuration with.

Apprise API was designed to easily fit into existing (and new) eco-systems that are looking for a simple notification solution.

Screenshots

There is a small built-in Configuration Manager that can be optionally accessed through your web browser allowing you to create and save as many configurations as you'd like. Each configuration is differentiated by a unique {KEY} that you decide on:

Below is a screenshot of how you can assign your Apprise URLs to your {KEY}. You can define both TEXT or YAML Apprise configurations.

Below is a screenshot of the review tab where you can preview what Apprise URL(s) got loaded from your defined configuration. It also allows you to view the tags associated with them (if any). Should you chose to send a test notification via this API, you can select the tags in advance you wish to target from here.

With configuration in place, you'll be able to use the Notification tab to send a test message to one or more of the services you defined in your configuration. You can also select from the tags (if any) you pre-assigned to your URLs defined. If you did not define any tags with you configured URLs, then you do not need to identify any here. You can use the tag all to notify all of your services regardless of what tag had otherwise been assigned to them (if any at all).

At the end of the day, the GUI just simply offers a user friendly interface to the same API developers can directly interface with if they wish to.

Installation

The following options should allow you to access the API at: http://localhost:8000/ from your browser.

Using dockerhub you can do the following:

# Retrieve container
docker pull caronc/apprise:latest

# Start it up:
# /config/store  is used for a persistent store, you do not have to mount
#                this if you don't intend to use it.
# /config is used for a spot to write all of the configuration files
#         generated through the API
# /plugin is used for a location you can add your own custom apprise plugins.
#         You do not have to mount this if you don't intend to use it.
# /attach is used for file attachments
#
# The below example sets a the APPRISE_WORKER_COUNT to a small value (over-riding
# a full production environment setting).  This may be all that is needed for
# a light-weight self hosted solution.
#
# setting APPRISE_STATEFUL_MODE to simple allows you to map your defined {key}
# straight to a file found in the `/config` path.  In simple home configurations
# this is sometimes the ideal expectation.
#
# Set your User ID or Group ID if you wish to over-ride the default of 1000
# in the below example, we make sure it runs as the user we created the container as

docker run --name apprise \
   -p 8000:8000 \
   -e PUID=$(id -u) \
   -e PGID=$(id -g) \
   -v /path/to/local/config:/config \
   -v /path/to/local/plugin:/plugin \
   -v /path/to/local/attach:/attach \
   -e APPRISE_STATEFUL_MODE=simple \
   -e APPRISE_WORKER_COUNT=1 \
   -d caronc/apprise:latest

You can also choose to build yourself a custom version after checking out the source code. This is sometimes useful when you want to make a change to the source code and try it out. A common change one might make is to update the Dockerfile to point to the master branch of Apprise instead of using the stable version.

# Setup your environment the way you like
docker build -t apprise/local:latest -f Dockerfile .

# Set up a directory you wish to store your configuration in:
mkdir -p /etc/apprise

# Launch your instance
docker run --name apprise \
   -p 8000:8000 \
   -e PUID=$(id -u) \
   -e PGID=$(id -g) \
   -e APPRISE_STATEFUL_MODE=simple \
   -e APPRISE_WORKER_COUNT=1 \
   -v /etc/apprise:/config \
   -d apprise/local:latest

# Change your paths to what you want them to be, you may also wish to
# just do the following:
mkdir -p config store
docker run --name apprise \
   -p 8000:8000 \
   -e PUID=$(id -u) \
   -e PGID=$(id -g) \
   -e APPRISE_STATEFUL_MODE=simple \
   -e APPRISE_WORKER_COUNT=1 \
   -v ./config:/config \
   -d apprise/local:latest

A docker-compose.yml file is already set up to grant you an instant production ready simulated environment:

# Docker Compose
docker-compose up

Dockerfile Details

The following architectures are supported: amd64, arm/v7, and arm64. The following tags can be used:

• latest: Points to the latest stable build.
• edge: Points to the last push to the master branch.

Apprise URLs

📣 In order to trigger a notification, you first need to define one or more Apprise URLs to support the services you wish to leverage. Visit https://github.com/caronc/apprise/wiki to see the ever-growing list of the services supported today.

API Details

Health Checks

You can perform status or health checks on your server configuration by accessing /status.

Path	Method	Description
/status	GET	Simply returns a server status. The server http response code is a 200 if the server is working correcty and a 417 if there was an unexpected issue. You can set the Accept header to application/json or text/plain for different response outputs.

Below is a sample of just a simple text response:

# Request a general text response
# Output will read `OK` if everything is fine, otherwise it will return
# one or more of the following separated by a comma:
#  - ATTACH_PERMISSION_ISSUE: Can not write attachments (likely a permission issue)
#  - CONFIG_PERMISSION_ISSUE: Can not write configuration (likely a permission issue)
#  - STORE_PERMISSION_ISSUE: Can not write to persistent storage (likely a permission issue)
curl -X GET http://localhost:8000/status

Below is a sample of a JSON response:

curl -X GET -H "Accept: application/json" http://localhost:8000/status

The above output may look like this:

{
  "attach_lock": false,
  "config_lock": false,
  "status": {
    "persistent_storage": true,
    "can_write_config": true,
    "can_write_attach": true,
    "details": ["OK"]
  }
}

• The attach_lock always cross references if the APPRISE_ATTACH_SIZE on whether or not it is 0 (zero) or less.
• The config_lock always cross references if the APPRISE_CONFIG_LOCK is enabled or not.
• The status.persistent_storage defines if the persistent storage is enabled or not. If the environment variable APPRISE_STORAGE_PATH is empty, this value will always read false and it will not impact the status.details
• The status.can_write_config defines if the configuration directory is writable or not. If the environment variable APPRISE_STATEFUL_MODE is set to disabled, this value will always read false and it will not impact the status.details
• The status.can_write_attach defines if the attachment directory is writable or not. If the environment variable APPRISE_ATTACH_SIZE. This value will always read false and it will not impact the status.details.
• The status.details identifies the overall status. If there is more then 1 issue to report here, they will all show in this list. In a working orderly environment, this will always be set to OK and the http response type will be 200.

Stateless Solution

Some people may wish to only have a sidecar solution that does require use of any persistent storage. The following API endpoint can be used to directly send a notification of your choice to any of the supported services by Apprise without any storage based requirements:

Path	Method	Description
/notify/	POST	Sends one or more notifications to the URLs identified as part of the payload, or those identified in the environment variable APPRISE_STATELESS_URLS. Payload Parameters 📌 urls: One or more URLs identifying where the notification should be sent to. If this field isn't specified then it automatically assumes the settings.APPRISE_STATELESS_URLS value or APPRISE_STATELESS_URLS environment variable. 📌 body: Your message body. This is a required field. 📌 title: Optionally define a title to go along with the body. 📌 type: Defines the message type you want to send as. The valid options are info, success, warning, and failure. If no type is specified then info is the default value used. 📌 format: Optionally identify the text format of the data you're feeding Apprise. The valid options are text, markdown, html. The default value if nothing is specified is text.

Here is a stateless example of how one might send a notification (using /notify/):

# Send your notifications directly
curl -X POST -d 'urls=mailto://user:pass@gmail.com&body=test message' \
    http://localhost:8000/notify

# Send a notification with an attachment:
curl -X POST \
    -F 'urls=mailto://user:pass@gmail.com' \
    -F 'body=test message' \
    -F attach=@Screenshot-1.png \
    http://localhost:8000/notify

# Send multiple attachments; just make sure the attach keyword is unique:
curl -X POST \
    -F 'urls=mailto://user:pass@gmail.com' \
    -F 'body=test message' \
    -F attach1=@Screenshot-1.png \
    -F attach2=@/my/path/to/Apprise.doc \
    http://localhost:8000/notify

# This example shows how you can place the body among other parameters
# in the GET parameter and not the payload as another option.
curl -X POST -d 'urls=mailto://user:pass@gmail.com&body=test message' \
    -F @/path/to/your/attachment \
    http://localhost:8000/notify

# The body is not required if an attachment is provided:
curl -X POST -d 'urls=mailto://user:pass@gmail.com' \
    -F @/path/to/your/attachment \
    http://localhost:8000/notify

# Send your notifications directly using JSON
curl -X POST -d '{"urls": "mailto://user:pass@gmail.com", "body":"test message"}' \
    -H "Content-Type: application/json" \
    http://localhost:8000/notify

# attach= is an alias of attachment=
# Send a notification with a URL based attachment
curl -X POST \
    -F 'urls=mailto://user:pass@gmail.com' \
    -F attach=attach=https://raw.githubusercontent.com/caronc/apprise/master/apprise/assets/themes/default/apprise-logo.png \
    http://localhost:8000/notify

You can also send notifications that are URLs. Apprise will download the item so that it can send it along to all end points that should be notified about it.

# Use the 'attachment' parameter and send along a web request
curl -X POST \
    -F 'urls=mailto://user:pass@gmail.com' \
    -F attachment=https://i.redd.it/my2t4d2fx0u31.jpg \
    http://localhost:8000/notify

# To send more then one URL, the following would work:
curl -X POST \
    -F 'urls=mailto://user:pass@gmail.com' \
    -F attachment=https://i.redd.it/my2t4d2fx0u31.jpg \
    -F attachment=https://path/to/another/remote/file.pdf \
    http://localhost:8000/notify

# Finally feel free to mix and match local files with external ones:
curl -X POST \
    -F 'urls=mailto://user:pass@gmail.com' \
    -F attachment=https://i.redd.it/my2t4d2fx0u31.jpg \
    -F attachment=https://path/to/another/remote/file.pdf \
    -F @/path/to/your/local/file/attachment \
    http://localhost:8000/notify

Persistent (Stateful) Storage Solution

You can pre-save all of your Apprise configuration and/or set of Apprise URLs and associate them with a {KEY} of your choosing. Once set, the configuration persists for retrieval by the apprise CLI tool or any other custom integration you've set up. The built in website with comes with a user interface that you can use to leverage these API calls as well. Those who wish to build their own application around this can use the following API end points:

Path	Method	Description
/add/{KEY}	POST	Saves Apprise Configuration (or set of URLs) to the persistent store. Payload Parameters 📌 urls: Define one or more Apprise URL(s) here. Use a comma and/or space to separate one URL from the next. 📌 config: Provide the contents of either a YAML or TEXT based Apprise configuration. 📌 format: This field is only required if you've specified the config parameter. Used to tell the server which of the supported (Apprise) configuration types you are passing. Valid options are text and yaml. This path does not work if APPRISE_CONFIG_LOCK is set.
/del/{KEY}	POST	Removes Apprise Configuration from the persistent store. This path does not work if APPRISE_CONFIG_LOCK is set.
/get/{KEY}	POST	Returns the Apprise Configuration from the persistent store. This can be directly used with the Apprise CLI and/or the AppriseConfig() object (see here for details). This path does not work if APPRISE_CONFIG_LOCK is set.
/notify/{KEY}	POST	Sends notification(s) to all of the end points you've previously configured associated with a {KEY}. Payload Parameters 📌 body: Your message body. This is the only required field. 📌 title: Optionally define a title to go along with the body. 📌 type: Defines the message type you want to send as. The valid options are info, success, warning, and failure. If no type is specified then info is the default value used. 📌 tag: Optionally notify only those tagged accordingly. Use a comma (,) to OR your tags and a space ( ) to AND them. More details on this can be seen documented below. 📌 format: Optionally identify the text format of the data you're feeding Apprise. The valid options are text, markdown, html. The default value if nothing is specified is text.
/json/urls/{KEY}	GET	Returns a JSON response object that contains all of the URLS and Tags associated with the key specified.
/details	GET	Set the Accept Header to application/json and retrieve a JSON response object that contains all of the supported Apprise URLs. See here for more details

As an example, the /json/urls/{KEY} response might return something like this:

{
   "tags": ["devops", "admin", "me"],
   "urls": [
      {
         "url": "slack://TokenA/TokenB/TokenC",
         "tags": ["devops", "admin"]
      },
      {
         "url": "discord://WebhookID/WebhookToken",
         "tags": ["devops"]
      },
      {
         "url": "mailto://user:pass@gmail.com",
         "tags": ["me"]
      }
   ]
}

You can pass in attributes to the /json/urls/{KEY} such as privacy=1 which hides the passwords and secret tokens when returning the response. You can also set tag= and filter the returned results based on a comma separated set of tags. if no tag= is specified, then tag=all is used as the default.

Note, if APPRISE_CONFIG_LOCK is set, then privacy=1 is always enforced preventing credentials from being leaked.

Here is an example using curl as to how someone might send a notification to everyone associated with the tag abc123 (using /notify/{key}):

# Send notification(s) to a {key} defined as 'abc123'
curl -X POST -d "body=test message" \
    http://localhost:8000/notify/abc123

# Here is the same request but using JSON instead:
curl -X POST -d '{"body":"test message"}' \
    -H "Content-Type: application/json" \
    http://localhost:8000/notify/abc123

# Send attachments:
curl -X POST \
    -F 'urls=mailto://user:pass@gmail.com' \
    -F 'body=test message' \
    -F attach1=@Screenshot-1.png \
    -F attach2=@/my/path/to/Apprise.doc \
    http://localhost:8000/notify/abc123

# attach= is an alias of attachment=
# Send a notification with a URL based attachment
curl -X POST \
    -F 'urls=mailto://user:pass@gmail.com' \
    -F attach=attach=https://raw.githubusercontent.com/caronc/apprise/master/apprise/assets/themes/default/apprise-logo.png \
    http://localhost:8000/notify/abc123

🏷️ Leveraging tagging allows you to associate one or more tags (or categories) with your Apprise URLs. By doing this, notifications only need to be referred to by their easy to remember notify tag name such as devops, admin, family, etc. You can very easily group more than one notification service under the same tag allowing you to notify a group of services at once. This is accomplished through configuration files (documented here) that can be saved to the persistent storage previously associated with a {KEY}.

# Send notification(s) to a {KEY} defined as 'abc123'
# but only notify the URLs associated with the 'devops' tag
curl -X POST -d 'tag=devops&body=test message' \
    http://localhost:8000/notify/abc123

# Here is the same request but using JSON instead:
curl -X POST -d '{"tag":"devops", "body":"test message"}' \
    -H "Content-Type: application/json" \
    http://localhost:8000/notify/abc123

Tagging

Tagging is one of the things that makes Apprise super handy and easy to use. Not only can you group one or more notifications together (all sharing the same tag), but you can assign multiple tags to the same URL and trigger it through crafted and selected tag expressions.

Example	Effect
TagA	TagA
TagA, TagB	TagA OR TagB
TagA TagC, TagB	(TagA AND TagC) OR TagB
TagB TagC	TagB AND TagC

# 'AND' Example
# Send notification(s) to a {KEY} defined as 'abc123'
# Notify the URLs associated with the 'devops' and 'after-hours' tag
# The 'space' acts as an 'AND' You can also use '+' character (in spot of the
# space to achieve the same results)
curl -X POST -d '{"tag":"devops after-hours", "body":"repo outage"}' \
    -H "Content-Type: application/json" \
    http://localhost:8000/notify/abc123


# 'OR' Example
# Send notification(s) to a {KEY} defined as 'def456'
# Notify the URLs associated with the 'dev' OR 'qa' tag
# The 'comma' acts as an 'OR'.  The whitespace around the comma is ignored (if
# defined) You can also use '+' character (in spot of the space to achieve the
# same results)
curl -X POST -d '{"tag":"dev, qa", "body":"bug #000123 is back :("}' \
    -H "Content-Type: application/json" \
    http://localhost:8000/notify/def456


# 'AND' and 'OR' Example
# Send notification(s) to a {KEY} defined as 'projectX'
# Notify the URLs associated with the 'leaders AND teamA' AND additionally
# the 'leaders AND teamB'.
curl -X POST -d '{"tag":"leaders teamA, leaders teamB", "body":"meeting now"}' \
    -H "Content-Type: application/json" \
    http://localhost:8000/notify/projectX

API Response Codes

HTTP Code	Name	Effect
200	ok	Notification was sent
204	no content	There was no configuration (or it was empty) found by the specified {KEY}
400	bad request	Your API call did not conform to what was documented here
405	method not accepted	Your API call identified an action that has been disabled due to the Server configuration (such as a apprise:// APPRISE_RECURSION_MAX being exceeded).
424	failed dependency	At least one notification could not be sent. This can be due to - Not all notifications intended to be actioned could follow through (due to upstrem failures). You didn't idenify a tag associated with what was defined in your configuration. The tag(s) you specified do not match with those defined in your configuration.
431	fields too large	This can happen if you're payload is larger then 3MB (default value). See APPRISE_UPLOAD_MAX_MEMORY_SIZE to adjust this.
500	internal server error	This can occur if there was an issue saving your configuration to disk (usually the cause of permission issues).

API Notes

• {KEY} must be 1-128 alphanumeric characters in length. In addition to this, the underscore (_) and dash (-) are also accepted.
  • Consider using keys like sha1, sha512, uuid, etc to secure shared namespaces if you wish to open your platform to others. Or keep it simple in a controlled environment and just use the default string apprise as your key (and as illustrated in the examples above). You can over-ride this default value by setting the APPRISE_DEFAULT_CONFIG_ID(see below).
• Specify the Content-Type of application/json to use the JSON support otherwise the default expected format is application/x-www-form-urlencoded (whether it is specified or not).
• There is no authentication (or SSL encryption) required to use this API; this is by design. The intention here is to be a light-weight and fast micro-service.
• There are no additional dependencies (such as database requirements, etc) should you choose to use the optional persistent store (mounted as /config).

Environment Variables

The use of environment variables allow you to provide over-rides to default settings.

Variable	Description
PUID	The User ID you wish the Apprise instance under the hood to run as. The default is 1000 if not otherwise specified.
PGID	The Group ID you wish the Apprise instance under the hood to run as. The default is 1000 if not otherwise specified.
APPRISE_DEFAULT_THEME	Can be set to light or dark; it defaults to light if not otherwise provided. The theme can be toggled from within the website as well.
APPRISE_DEFAULT_CONFIG_ID	Defaults to apprise. This is the presumed configuration ID you always default to when accessing the configuration manager via the website.
APPRISE_CONFIG_DIR	Defines an (optional) persistent store location of all configuration files saved. By default: - Configuration is written to the apprise_api/var/config directory when just using the Django manage runserver script. However for the path for the container is /config.
APPRISE_STORAGE_DIR	Defines an (optional) persistent store location of all cache files saved. By default persistent storage is written into the <APPRISE_CONFIG_DIR>/store.
APPRISE_STORAGE_MODE	Defines the storage mode to use. If no APPRISE_STORGE_DIR is identified, then this is set to memory in all circumtances reguardless what it might otherwise be set to. The possible options are: 📌 auto: This is also the default. Writes cache files on demand only. 📌 memory: Persistent storage is disabled; local memory is used for simple internal references. This is effectively the behavior of Apprise of versions 1.8.1 and earlier. 📌 flush: A bit more i/o intensive then auto. Content is written to disk constantly if changed in anyway. This mode is still experimental.
APPRISE_STORAGE_UID_LENGTH	Defines the unique key lengths used to identify an Apprise URL. By default this is set to 8. Value can not be set to a smaller value then 2 or larger then 64.
APPRISE_STATELESS_STORAGE	Allow stateless URLs (in addition to stateful) to also leverage persistent storage. This defaults to no and can however be set to yes by simply defining the global variable as such.
APPRISE_ATTACH_DIR	The directory the uploaded attachments are placed in. By default: - Attachments are written to the apprise_api/var/attach directory when just using the Django manage runserver script. However for the path for the container is /attach.
APPRISE_ATTACH_SIZE	Over-ride the attachment size (defined in MB). By default it is set to 200 (Megabytes). You can set this up to a maximum value of 500 which is the restriction in place for NginX (internal hosting ervice) at this time. If you set this to zero (0) then attachments will not be passed along even if provided.
APPRISE_UPLOAD_MAX_MEMORY_SIZE	Over-ride the in-memory accepted payload size (defined in MB). By default it is set to 3 (Megabytes). There is no reason the HTTP payload (excluding attachments) should exceed this limit. This value is only configurable for those who have edge cases where there are exceptions to this rule.
APPRISE_STATELESS_URLS	For a non-persistent solution, you can take advantage of this global variable. Use this to define a default set of Apprise URLs to notify when using API calls to /notify. If no {KEY} is defined when calling /notify then the URLs defined here are used instead. By default, nothing is defined for this variable.
APPRISE_STATEFUL_MODE	This can be set to the following possible modes: 📌 hash: This is also the default. It stores the server configuration in a hash formatted that can be easily indexed and compressed. 📌 simple: Configuration is written straight to disk using the {KEY}.cfg (if TEXT based) and {KEY}.yml (if YAML based). 📌 disabled: Straight up deny any read/write queries to the servers stateful store. Effectively turn off the Apprise Stateful feature completely.
APPRISE_CONFIG_LOCK	Locks down your API hosting so that you can no longer delete/update/access stateful information. Your configuration is still referenced when stateful calls are made to /notify. The idea of this switch is to allow someone to set their (Apprise) configuration up and then as an added security tactic, they may choose to lock their configuration down (in a read-only state). Those who use the Apprise CLI tool may still do it, however the --config (-c) switch will not successfully reference this access point anymore. You can however use the apprise:// plugin without any problem (see here for more details). This defaults to no and can however be set to yes by simply defining the global variable as such.
APPRISE_DENY_SERVICES	A comma separated set of entries identifying what plugins to deny access to. You only need to identify one schema entry associated with a plugin to in turn disable all of it. Hence, if you wanted to disable the glib plugin, you do not need to additionally include qt as well since it's included as part of the (dbus) package; consequently specifying qt would in turn disable the glib module as well (another way to accomplish the same task). To exclude/disable more the one upstream service, simply specify additional entries separated by a , (comma) or (space). The APPRISE_DENY_SERVICES entries are ignored if the APPRISE_ALLOW_SERVICES is identified. By default, this is initialized to windows, dbus, gnome, macosx, syslog (blocking local actions from being issued inside of the docker container)
APPRISE_ALLOW_SERVICES	A comma separated set of entries identifying what plugins to allow access to. You may only use alpha-numeric characters as is the restriction of Apprise Schemas (schema://) anyway. To exclusively include more the one upstream service, simply specify additional entries separated by a , (comma) or (space). The APPRISE_DENY_SERVICES entries are ignored if the APPRISE_ALLOW_SERVICES is identified.
SECRET_KEY	A Django variable acting as a salt for most things that require security. This API uses it for the hash sequences when writing the configuration files to disk (hash mode only).
ALLOWED_HOSTS	A list of strings representing the host/domain names that this API can serve. This is a security measure to prevent HTTP Host header attacks, which are possible even under many seemingly-safe web server configurations. By default this is set to * allowing any host. Use space to delimit more than one host.
APPRISE_PLUGIN_PATHS	Apprise supports the ability to define your own schema:// definitions and load them. To read more about how you can create your own customizations, check out this link here. You may define one or more paths (separated by comma ,) here. By default the apprise_api/var/plugin directory is scanned (which does not include anything). Feel free to set this to an empty string to disable any custom plugin loading.
APPRISE_RECURSION_MAX	This defines the number of times one Apprise API Server can (recursively) call another. This is to both support and mitigate abuse through the apprise:// schema for those who choose to use it. When leveraged properly, you can increase this (recursion max) value and successfully load balance the handling of many notification requests through many additional API Servers. By default this value is set to 1 (one).
APPRISE_WEBHOOK_URL	Define a Webhook that Apprise should POST results to upon each notification call made. This must be in the format of an http:// or https:// URI. By default no URL is specified and no webhook is actioned.
APPRISE_WORKER_COUNT	Over-ride the number of workers to run. by default this is calculated (2 * CPUS_DETECTED) + 1 as advised by Gunicorn's website. Hobby enthusiasts and/or users who are simply setting up Apprise to support their home (light-weight usage) may wish to set this value to 1 to limit the resources the Apprise server prepares for itself.
APPRISE_WORKER_TIMEOUT	Over-ride the worker timeout value (in seconds); by default this is 300 (5 min) which should be more than enough time to send all pending notifications.
BASE_URL	Those who are hosting the API behind a proxy that requires a subpath to gain access to this API should specify this path here as well. By default this is not set at all.
LOG_LEVEL	Adjust the log level to the console. Possible values are CRITICAL, ERROR, WARNING, INFO, and DEBUG.
DEBUG	This defaults to no and can however be set to yes by simply defining the global variable as such.

Nginx Overrides

The 2 files you can override are:

1. /etc/nginx/location-override.conf which is included within all of the Apprise API NginX location references.
2. /etc/nginx/server-override.conf which is included within Apprise API server reference.

Authentication

Under the hood, Apprise-API is running a small NginX instance. It allows for you to inject your own configuration into it. One thing you may wish to add is basic authentication.

Below we create ourselves some nginx directives we'd like to apply to our Apprise API:

# Our override.conf file:
auth_basic            "Apprise API Restricted Area";
auth_basic_user_file  /etc/nginx/.htpasswd;

Now let's set ourselves up with a simple password file (for more info on htpasswd files, see here

# Create ourselves a for our user 'foobar'; the below will prompt you for the pass
# you want to provide:
htpasswd -c apprise_api.htpasswd foobar

# Note: the -c above is only needed to create the database for the first time

Now we can create our docker container with this new authentication information:

# Create our container containing Basic Auth:
docker run --name apprise \
   -p 8000:8000 \
   -e PUID=$(id -u) \
   -e PGID=$(id -g) \
   -v /path/to/local/config:/config \
   -v /path/to/local/attach:/attach \
   -v ./override.conf:/etc/nginx/location-override.conf:ro \
   -v ./apprise_api.htpasswd:/etc/nginx/.htpasswd:ro \
   -e APPRISE_STATEFUL_MODE=simple \
   -e APPRISE_WORKER_COUNT=1 \
   -d caronc/apprise:latest

Visit http://localhost:8000 to see if things are working as expected. If you followed the example above, you should log in as the user foobar using the credentials you provided the account.

You can add further accounts to the existing database by omitting the -c switch:

# Add another account
htpasswd apprise_api.htpasswd user2

Development Environment

The following should get you a working development environment to test with:

# Create a virtual environment in the same directory you
# cloned this repository to:
python -m venv .

# Activate it now:
. ./bin/activate

# install dependencies
pip install -r dev-requirements.txt -r requirements.txt

# Run a dev server (debug mode) accessible from your browser at:
# -> http://localhost:8000/
./manage.py runserver

Some other useful development notes:

# Check for any lint errors
flake8 apprise_api

# Run unit tests
pytest apprise_api

Apprise Integration

First you'll need to have it installed:

# install apprise into your environment
pip install apprise

Apprise CLI Pull Example

A scenario where you want to poll the API for your configuration:

# A simple example of the Apprise CLI
# pulling down previously stored configuration
apprise -vvv --body="test message" \
   --config=http://localhost:8000/get/{KEY}

You can also leverage the import parameter supported in Apprise configuration files if APPRISE_CONFIG_LOCK isn't set on the server you're accessing:

# Linux users can place this in ~/.apprise
# Windows users can place this info in %APPDATA%/Apprise/apprise

# Swap {KEY} with your apprise key you configured on your API
import http://localhost:8000/get/{KEY}

Now you'll just automatically source the configuration file without the need of the --config switch:

# Configuration is automatically loaded from our server.
apprise -vvv --body="my notification"

If you used tagging, then you can notify the specific service like so:

# Configuration is automatically loaded from our server.
apprise -vvv --tag=devops \
   --body="Tell James GitLab is down again."

If you're server has the APPRISE_CONFIG_LOCK set, you can still leverage the apprise:// plugin to trigger our pre-saved notifications:

# Swap {KEY} with your apprise key you configured on your API
apprise -vvv --body="There are donut's in the front hall if anyone wants any" \
   apprise://localhost:8000/{KEY}

Alternatively we can set this up in a configuration file and even tie our local tags to our upstream ones like so:

# Linux users can place this in ~/.apprise
# Windows users can place this info in %APPDATA%/Apprise/apprise

# Swap {KEY} with your apprise key you configured on your API
devteam=apprise://localhost:8000/{KEY}?tags=devteam

# the only catch is you need to map your tags on the local server to the tags
# you want to pass upstream to your Apprise server using this method.
# In the above we tied the local keyword `devteam` to the apprise server using the tag `devteam`

We could trigger our notification to our devteam now like:

# Trigger our service:
apprise -vvv --tag=devteam \
    --body="Guys, don't forget about the audit tomorrow morning."

AppriseConfig() Pull Example

Using the Apprise Python library, you can easily access and load your saved configuration from this API in order to use for future notifications.

import apprise

# Point our configuration to this API server:
config = apprise.AppriseConfig()

# The following only works if APPRISE_CONFIG_LOCK is not set
# if APPRISE_CONFIG_LOCK is set, you can optionally leverage the apprise://
# URL instead.
config.add('http://localhost:8000/get/{KEY}')

# Create our Apprise Instance
a = apprise.Apprise()

# Store our new configuration
a.add(config)

# Send a test message
a.notify('test message')

Third Party Webhook Support

It can be understandable that third party applications can't always publish the format expected by this API tool. To work-around this, you can re-map the fields just before they're processed. For example; consider that we expect the follow minimum payload items for a stateful notification:

{
    "body": "Message body"
}

But what if your tool you're using is only capable of sending:

{
   "subject": "My Title",
   "payload": "My Body"
}

We would want to map subject to title in this case and payload to body. This can easily be done using the : (colon) argument when we prepare our payload:

# Note the keyword arguments prefixed with a `:` (colon).   These
# instruct the API to map the payload (which we may not have control over)
# to align with what the Apprise API expects.
#
# We also convert `subject` to `title` too:
curl -X POST \
    -F "subject=Mesage Title" \
    -F "payload=Message Body" \
    "http://localhost:8000/notify/{KEY}?:subject=title&:payload=body"

Here is the JSON Version and tests out the Stateless query (which requires at a minimum the urls and body:

# We also convert `subject` to `title` too:
curl -X POST -d '{"href": "mailto://user:pass@gmail.com", "subject":"My Title", "payload":"Body"}' \
    -H "Content-Type: application/json" \
    "http://localhost:8000/notify/{KEY}?:subject=title&:payload=body&:href=urls"

The colon : prefix is the switch that starts the re-mapping rule engine. You can do 3 possible things with the rule engine:

1. :existing_key=expected_key: Rename an existing (expected) payload key to one Apprise expects
2. :existing_key=: By setting no value, the existing key is simply removed from the payload entirely
3. :expected_key=A value to give it: You can also fix an expected apprise key to a pre-generated string value.