#RobotBlocks - Readme In this repository, you can find the source files for three different construction systems, designed for building small robots. All three systems are designed to be used with Misumi 3 Series aluminum extrusions, but should also be compatible with OpenBeam.
Each system provides 3 different types of connectors, but the principles can be adapted to suit other purposes, so feel free to modify!
- 90° corner connector
- Geared DC motor connector
- Micro servo connector
##System 1 - Laser-cut connectors
Cut from 3mm ABS sheet, acrylic is not recommended due to the material's brittleness.
Requires 4 M3 nuts and 4 M3x6 screws per connector.
Hex socket cap screws are recommended for easier assembly in tight spaces.
##System 2 - Printed friction-fit connectors
Printed in PLA on an Ultimaker 1, 0.1mm layer height, 20% infill density.
Other settings and different materials can be used for increased strength.
No extra fasteners needed.
##System 3 - Printed "Hybrid"
Printed in PLA on an Ultimaker 1, 0.1mm layer height, 20% infill density.
Other settings and different materials can be used for increased strength.
Requires 2 M3 nuts and 2 M3x10 screws per connector.
Hex socket cap screws are recommended for easier assembly in tight spaces.
##License This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.