Add UHS SDIO support to p212/p23x/q20x #18

chewitt · 2023-02-19T16:32:35Z

Following the recent work on SDIO IRQ support we should evaluate UHS SDIO modes in p212/p23x/q20x device trees

[ Upstream commit 5683e14 ] WED is supported just for mmio devices, so do not check it for usb or sdio devices. This patch fixes the crash reported below: [ 21.946627] wlp0s3u1i3: authenticate with c4:41:1e:f5:2b:1d [ 22.525298] wlp0s3u1i3: send auth to c4:41:1e:f5:2b:1d (try 1/3) [ 22.548274] wlp0s3u1i3: authenticate with c4:41:1e:f5:2b:1d [ 22.557694] wlp0s3u1i3: send auth to c4:41:1e:f5:2b:1d (try 1/3) [ 22.565885] wlp0s3u1i3: authenticated [ 22.569502] wlp0s3u1i3: associate with c4:41:1e:f5:2b:1d (try 1/3) [ 22.578966] wlp0s3u1i3: RX AssocResp from c4:41:1e:f5:2b:1d (capab=0x11 status=30 aid=3) [ 22.579113] wlp0s3u1i3: c4:41:1e:f5:2b:1d rejected association temporarily; comeback duration 1000 TU (1024 ms) [ 23.649518] wlp0s3u1i3: associate with c4:41:1e:f5:2b:1d (try 2/3) [ 23.752528] wlp0s3u1i3: RX AssocResp from c4:41:1e:f5:2b:1d (capab=0x11 status=0 aid=3) [ 23.797450] wlp0s3u1i3: associated [ 24.959527] kernel tried to execute NX-protected page - exploit attempt? (uid: 0) [ 24.959640] BUG: unable to handle page fault for address: ffff88800c223200 [ 24.959706] #PF: supervisor instruction fetch in kernel mode [ 24.959788] #PF: error_code(0x0011) - permissions violation [ 24.959846] PGD 2c01067 P4D 2c01067 PUD 2c02067 PMD c2a8063 PTE 800000000c223163 [ 24.959957] Oops: 0011 [#1] PREEMPT SMP [ 24.960009] CPU: 0 PID: 391 Comm: wpa_supplicant Not tainted 6.2.0-kvm #18 [ 24.960089] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.1-2.fc37 04/01/2014 [ 24.960191] RIP: 0010:0xffff88800c223200 [ 24.960446] RSP: 0018:ffffc90000ff7698 EFLAGS: 00010282 [ 24.960513] RAX: ffff888028397010 RBX: ffff88800c26e630 RCX: 0000000000000058 [ 24.960598] RDX: ffff88800c26f844 RSI: 0000000000000006 RDI: ffff888028397010 [ 24.960682] RBP: ffff88800ea72f00 R08: 18b873fbab2b964c R09: be06b38235f3c63c [ 24.960766] R10: 18b873fbab2b964c R11: be06b38235f3c63c R12: 0000000000000001 [ 24.960853] R13: ffff88800c26f84c R14: ffff8880063f0ff8 R15: ffff88800c26e644 [ 24.960950] FS: 00007effcea327c0(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000 [ 24.961036] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 24.961106] CR2: ffff88800c223200 CR3: 000000000eaa2000 CR4: 00000000000006b0 [ 24.961190] Call Trace: [ 24.961219] <TASK> [ 24.961245] ? mt76_connac_mcu_add_key+0x2cf/0x310 [ 24.961313] ? mt7921_set_key+0x150/0x200 [ 24.961365] ? drv_set_key+0xa9/0x1b0 [ 24.961418] ? ieee80211_key_enable_hw_accel+0xd9/0x240 [ 24.961485] ? ieee80211_key_replace+0x3f3/0x730 [ 24.961541] ? crypto_shash_setkey+0x89/0xd0 [ 24.961597] ? ieee80211_key_link+0x2d7/0x3a0 [ 24.961664] ? crypto_aead_setauthsize+0x31/0x50 [ 24.961730] ? sta_info_hash_lookup+0xa6/0xf0 [ 24.961785] ? ieee80211_add_key+0x1fc/0x250 [ 24.961842] ? rdev_add_key+0x41/0x140 [ 24.961882] ? nl80211_parse_key+0x6c/0x2f0 [ 24.961940] ? nl80211_new_key+0x24a/0x290 [ 24.961984] ? genl_rcv_msg+0x36c/0x3a0 [ 24.962036] ? rdev_mod_link_station+0xe0/0xe0 [ 24.962102] ? nl80211_set_key+0x410/0x410 [ 24.962143] ? nl80211_pre_doit+0x200/0x200 [ 24.962187] ? genl_bind+0xc0/0xc0 [ 24.962217] ? netlink_rcv_skb+0xaa/0xd0 [ 24.962259] ? genl_rcv+0x24/0x40 [ 24.962300] ? netlink_unicast+0x224/0x2f0 [ 24.962345] ? netlink_sendmsg+0x30b/0x3d0 [ 24.962388] ? ____sys_sendmsg+0x109/0x1b0 [ 24.962388] ? ____sys_sendmsg+0x109/0x1b0 [ 24.962440] ? __import_iovec+0x2e/0x110 [ 24.962482] ? ___sys_sendmsg+0xbe/0xe0 [ 24.962525] ? mod_objcg_state+0x25c/0x330 [ 24.962576] ? __dentry_kill+0x19e/0x1d0 [ 24.962618] ? call_rcu+0x18f/0x270 [ 24.962660] ? __dentry_kill+0x19e/0x1d0 [ 24.962702] ? __x64_sys_sendmsg+0x70/0x90 [ 24.962744] ? do_syscall_64+0x3d/0x80 [ 24.962796] ? exit_to_user_mode_prepare+0x1b/0x70 [ 24.962852] ? entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 24.962913] </TASK> [ 24.962939] Modules linked in: [ 24.962981] CR2: ffff88800c223200 [ 24.963022] ---[ end trace 0000000000000000 ]--- [ 24.963087] RIP: 0010:0xffff88800c223200 [ 24.963323] RSP: 0018:ffffc90000ff7698 EFLAGS: 00010282 [ 24.963376] RAX: ffff888028397010 RBX: ffff88800c26e630 RCX: 0000000000000058 [ 24.963458] RDX: ffff88800c26f844 RSI: 0000000000000006 RDI: ffff888028397010 [ 24.963538] RBP: ffff88800ea72f00 R08: 18b873fbab2b964c R09: be06b38235f3c63c [ 24.963622] R10: 18b873fbab2b964c R11: be06b38235f3c63c R12: 0000000000000001 [ 24.963705] R13: ffff88800c26f84c R14: ffff8880063f0ff8 R15: ffff88800c26e644 [ 24.963788] FS: 00007effcea327c0(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000 [ 24.963871] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 24.963941] CR2: ffff88800c223200 CR3: 000000000eaa2000 CR4: 00000000000006b0 [ 24.964018] note: wpa_supplicant[391] exited with irqs disabled Fixes: d1369e5 ("wifi: mt76: connac: introduce mt76_connac_mcu_sta_wed_update utility routine") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Acked-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/c42168429453474213fa8244bf4b069de4531f40.1678124335.git.lorenzo@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 4e264be ] When a system with E810 with existing VFs gets rebooted the following hang may be observed. Pid 1 is hung in iavf_remove(), part of a network driver: PID: 1 TASK: ffff965400e5a340 CPU: 24 COMMAND: "systemd-shutdow" #0 [ffffaad04005fa50] __schedule at ffffffff8b3239cb #1 [ffffaad04005fae8] schedule at ffffffff8b323e2d #2 [ffffaad04005fb00] schedule_hrtimeout_range_clock at ffffffff8b32cebc #3 [ffffaad04005fb80] usleep_range_state at ffffffff8b32c930 #4 [ffffaad04005fbb0] iavf_remove at ffffffffc12b9b4c [iavf] #5 [ffffaad04005fbf0] pci_device_remove at ffffffff8add7513 #6 [ffffaad04005fc10] device_release_driver_internal at ffffffff8af08baa #7 [ffffaad04005fc40] pci_stop_bus_device at ffffffff8adcc5fc #8 [ffffaad04005fc60] pci_stop_and_remove_bus_device at ffffffff8adcc81e #9 [ffffaad04005fc70] pci_iov_remove_virtfn at ffffffff8adf9429 #10 [ffffaad04005fca8] sriov_disable at ffffffff8adf98e4 #11 [ffffaad04005fcc8] ice_free_vfs at ffffffffc04bb2c8 [ice] #12 [ffffaad04005fd10] ice_remove at ffffffffc04778fe [ice] #13 [ffffaad04005fd38] ice_shutdown at ffffffffc0477946 [ice] #14 [ffffaad04005fd50] pci_device_shutdown at ffffffff8add58f1 #15 [ffffaad04005fd70] device_shutdown at ffffffff8af05386 #16 [ffffaad04005fd98] kernel_restart at ffffffff8a92a870 #17 [ffffaad04005fda8] __do_sys_reboot at ffffffff8a92abd6 #18 [ffffaad04005fee0] do_syscall_64 at ffffffff8b317159 #19 [ffffaad04005ff08] __context_tracking_enter at ffffffff8b31b6fc #20 [ffffaad04005ff18] syscall_exit_to_user_mode at ffffffff8b31b50d #21 [ffffaad04005ff28] do_syscall_64 at ffffffff8b317169 #22 [ffffaad04005ff50] entry_SYSCALL_64_after_hwframe at ffffffff8b40009b RIP: 00007f1baa5c13d7 RSP: 00007fffbcc55a98 RFLAGS: 00000202 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f1baa5c13d7 RDX: 0000000001234567 RSI: 0000000028121969 RDI: 00000000fee1dead RBP: 00007fffbcc55ca0 R8: 0000000000000000 R9: 00007fffbcc54e90 R10: 00007fffbcc55050 R11: 0000000000000202 R12: 0000000000000005 R13: 0000000000000000 R14: 00007fffbcc55af0 R15: 0000000000000000 ORIG_RAX: 00000000000000a9 CS: 0033 SS: 002b During reboot all drivers PM shutdown callbacks are invoked. In iavf_shutdown() the adapter state is changed to __IAVF_REMOVE. In ice_shutdown() the call chain above is executed, which at some point calls iavf_remove(). However iavf_remove() expects the VF to be in one of the states __IAVF_RUNNING, __IAVF_DOWN or __IAVF_INIT_FAILED. If that's not the case it sleeps forever. So if iavf_shutdown() gets invoked before iavf_remove() the system will hang indefinitely because the adapter is already in state __IAVF_REMOVE. Fix this by returning from iavf_remove() if the state is __IAVF_REMOVE, as we already went through iavf_shutdown(). Fixes: 9745780 ("iavf: Add waiting so the port is initialized in remove") Fixes: a841733 ("iavf: Fix race condition between iavf_shutdown and iavf_remove") Reported-by: Marius Cornea <mcornea@redhat.com> Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Reviewed-by: Michal Kubiak <michal.kubiak@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 0b0747d upstream. The following processes run into a deadlock. CPU 41 was waiting for CPU 29 to handle a CSD request while holding spinlock "crashdump_lock", but CPU 29 was hung by that spinlock with IRQs disabled. PID: 17360 TASK: ffff95c1090c5c40 CPU: 41 COMMAND: "mrdiagd" !# 0 [ffffb80edbf37b58] __read_once_size at ffffffff9b871a40 include/linux/compiler.h:185:0 !# 1 [ffffb80edbf37b58] atomic_read at ffffffff9b871a40 arch/x86/include/asm/atomic.h:27:0 !# 2 [ffffb80edbf37b58] dump_stack at ffffffff9b871a40 lib/dump_stack.c:54:0 # 3 [ffffb80edbf37b78] csd_lock_wait_toolong at ffffffff9b131ad5 kernel/smp.c:364:0 # 4 [ffffb80edbf37b78] __csd_lock_wait at ffffffff9b131ad5 kernel/smp.c:384:0 # 5 [ffffb80edbf37bf8] csd_lock_wait at ffffffff9b13267a kernel/smp.c:394:0 # 6 [ffffb80edbf37bf8] smp_call_function_many at ffffffff9b13267a kernel/smp.c:843:0 # 7 [ffffb80edbf37c50] smp_call_function at ffffffff9b13279d kernel/smp.c:867:0 # 8 [ffffb80edbf37c50] on_each_cpu at ffffffff9b13279d kernel/smp.c:976:0 # 9 [ffffb80edbf37c78] flush_tlb_kernel_range at ffffffff9b085c4b arch/x86/mm/tlb.c:742:0 #10 [ffffb80edbf37cb8] __purge_vmap_area_lazy at ffffffff9b23a1e0 mm/vmalloc.c:701:0 #11 [ffffb80edbf37ce0] try_purge_vmap_area_lazy at ffffffff9b23a2cc mm/vmalloc.c:722:0 #12 [ffffb80edbf37ce0] free_vmap_area_noflush at ffffffff9b23a2cc mm/vmalloc.c:754:0 #13 [ffffb80edbf37cf8] free_unmap_vmap_area at ffffffff9b23bb3b mm/vmalloc.c:764:0 #14 [ffffb80edbf37cf8] remove_vm_area at ffffffff9b23bb3b mm/vmalloc.c:1509:0 #15 [ffffb80edbf37d18] __vunmap at ffffffff9b23bb8a mm/vmalloc.c:1537:0 #16 [ffffb80edbf37d40] vfree at ffffffff9b23bc85 mm/vmalloc.c:1612:0 #17 [ffffb80edbf37d58] megasas_free_host_crash_buffer [megaraid_sas] at ffffffffc020b7f2 drivers/scsi/megaraid/megaraid_sas_fusion.c:3932:0 #18 [ffffb80edbf37d80] fw_crash_state_store [megaraid_sas] at ffffffffc01f804d drivers/scsi/megaraid/megaraid_sas_base.c:3291:0 #19 [ffffb80edbf37dc0] dev_attr_store at ffffffff9b56dd7b drivers/base/core.c:758:0 #20 [ffffb80edbf37dd0] sysfs_kf_write at ffffffff9b326acf fs/sysfs/file.c:144:0 #21 [ffffb80edbf37de0] kernfs_fop_write at ffffffff9b325fd4 fs/kernfs/file.c:316:0 #22 [ffffb80edbf37e20] __vfs_write at ffffffff9b29418a fs/read_write.c:480:0 #23 [ffffb80edbf37ea8] vfs_write at ffffffff9b294462 fs/read_write.c:544:0 torvalds#24 [ffffb80edbf37ee8] SYSC_write at ffffffff9b2946ec fs/read_write.c:590:0 torvalds#25 [ffffb80edbf37ee8] SyS_write at ffffffff9b2946ec fs/read_write.c:582:0 torvalds#26 [ffffb80edbf37f30] do_syscall_64 at ffffffff9b003ca9 arch/x86/entry/common.c:298:0 torvalds#27 [ffffb80edbf37f58] entry_SYSCALL_64 at ffffffff9ba001b1 arch/x86/entry/entry_64.S:238:0 PID: 17355 TASK: ffff95c1090c3d80 CPU: 29 COMMAND: "mrdiagd" !# 0 [ffffb80f2d3c7d30] __read_once_size at ffffffff9b0f2ab0 include/linux/compiler.h:185:0 !# 1 [ffffb80f2d3c7d30] native_queued_spin_lock_slowpath at ffffffff9b0f2ab0 kernel/locking/qspinlock.c:368:0 # 2 [ffffb80f2d3c7d58] pv_queued_spin_lock_slowpath at ffffffff9b0f244b arch/x86/include/asm/paravirt.h:674:0 # 3 [ffffb80f2d3c7d58] queued_spin_lock_slowpath at ffffffff9b0f244b arch/x86/include/asm/qspinlock.h:53:0 # 4 [ffffb80f2d3c7d68] queued_spin_lock at ffffffff9b8961a6 include/asm-generic/qspinlock.h:90:0 # 5 [ffffb80f2d3c7d68] do_raw_spin_lock_flags at ffffffff9b8961a6 include/linux/spinlock.h:173:0 # 6 [ffffb80f2d3c7d68] __raw_spin_lock_irqsave at ffffffff9b8961a6 include/linux/spinlock_api_smp.h:122:0 # 7 [ffffb80f2d3c7d68] _raw_spin_lock_irqsave at ffffffff9b8961a6 kernel/locking/spinlock.c:160:0 # 8 [ffffb80f2d3c7d88] fw_crash_buffer_store [megaraid_sas] at ffffffffc01f8129 drivers/scsi/megaraid/megaraid_sas_base.c:3205:0 # 9 [ffffb80f2d3c7dc0] dev_attr_store at ffffffff9b56dd7b drivers/base/core.c:758:0 #10 [ffffb80f2d3c7dd0] sysfs_kf_write at ffffffff9b326acf fs/sysfs/file.c:144:0 #11 [ffffb80f2d3c7de0] kernfs_fop_write at ffffffff9b325fd4 fs/kernfs/file.c:316:0 #12 [ffffb80f2d3c7e20] __vfs_write at ffffffff9b29418a fs/read_write.c:480:0 #13 [ffffb80f2d3c7ea8] vfs_write at ffffffff9b294462 fs/read_write.c:544:0 #14 [ffffb80f2d3c7ee8] SYSC_write at ffffffff9b2946ec fs/read_write.c:590:0 #15 [ffffb80f2d3c7ee8] SyS_write at ffffffff9b2946ec fs/read_write.c:582:0 #16 [ffffb80f2d3c7f30] do_syscall_64 at ffffffff9b003ca9 arch/x86/entry/common.c:298:0 #17 [ffffb80f2d3c7f58] entry_SYSCALL_64 at ffffffff9ba001b1 arch/x86/entry/entry_64.S:238:0 The lock is used to synchronize different sysfs operations, it doesn't protect any resource that will be touched by an interrupt. Consequently it's not required to disable IRQs. Replace the spinlock with a mutex to fix the deadlock. Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Link: https://lore.kernel.org/r/20230828221018.19471-1-junxiao.bi@oracle.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit a154f5f ] The following call trace shows a deadlock issue due to recursive locking of mutex "device_mutex". First lock acquire is in target_for_each_device() and second in target_free_device(). PID: 148266 TASK: ffff8be21ffb5d00 CPU: 10 COMMAND: "iscsi_ttx" #0 [ffffa2bfc9ec3b18] __schedule at ffffffffa8060e7f #1 [ffffa2bfc9ec3ba0] schedule at ffffffffa8061224 #2 [ffffa2bfc9ec3bb8] schedule_preempt_disabled at ffffffffa80615ee #3 [ffffa2bfc9ec3bc8] __mutex_lock at ffffffffa8062fd7 #4 [ffffa2bfc9ec3c40] __mutex_lock_slowpath at ffffffffa80631d3 #5 [ffffa2bfc9ec3c50] mutex_lock at ffffffffa806320c #6 [ffffa2bfc9ec3c68] target_free_device at ffffffffc0935998 [target_core_mod] #7 [ffffa2bfc9ec3c90] target_core_dev_release at ffffffffc092f975 [target_core_mod] #8 [ffffa2bfc9ec3ca0] config_item_put at ffffffffa79d250f #9 [ffffa2bfc9ec3cd0] config_item_put at ffffffffa79d2583 #10 [ffffa2bfc9ec3ce0] target_devices_idr_iter at ffffffffc0933f3a [target_core_mod] #11 [ffffa2bfc9ec3d00] idr_for_each at ffffffffa803f6fc #12 [ffffa2bfc9ec3d60] target_for_each_device at ffffffffc0935670 [target_core_mod] #13 [ffffa2bfc9ec3d98] transport_deregister_session at ffffffffc0946408 [target_core_mod] #14 [ffffa2bfc9ec3dc8] iscsit_close_session at ffffffffc09a44a6 [iscsi_target_mod] #15 [ffffa2bfc9ec3df0] iscsit_close_connection at ffffffffc09a4a88 [iscsi_target_mod] #16 [ffffa2bfc9ec3df8] finish_task_switch at ffffffffa76e5d07 #17 [ffffa2bfc9ec3e78] iscsit_take_action_for_connection_exit at ffffffffc0991c23 [iscsi_target_mod] #18 [ffffa2bfc9ec3ea0] iscsi_target_tx_thread at ffffffffc09a403b [iscsi_target_mod] #19 [ffffa2bfc9ec3f08] kthread at ffffffffa76d8080 #20 [ffffa2bfc9ec3f50] ret_from_fork at ffffffffa8200364 Fixes: 36d4cb4 ("scsi: target: Avoid that EXTENDED COPY commands trigger lock inversion") Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Link: https://lore.kernel.org/r/20230918225848.66463-1-junxiao.bi@oracle.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

When creating ceq_0 during probing irdma, cqp.sc_cqp will be sent as a cqp_request to cqp->sc_cqp.sq_ring. If the request is pending when removing the irdma driver or unplugging its aux device, cqp.sc_cqp will be dereferenced as wrong struct in irdma_free_pending_cqp_request(). PID: 3669 TASK: ffff88aef892c000 CPU: 28 COMMAND: "kworker/28:0" #0 [fffffe0000549e38] crash_nmi_callback at ffffffff810e3a34 #1 [fffffe0000549e40] nmi_handle at ffffffff810788b2 #2 [fffffe0000549ea0] default_do_nmi at ffffffff8107938f #3 [fffffe0000549eb8] do_nmi at ffffffff81079582 #4 [fffffe0000549ef0] end_repeat_nmi at ffffffff82e016b4 [exception RIP: native_queued_spin_lock_slowpath+1291] RIP: ffffffff8127e72b RSP: ffff88aa841ef778 RFLAGS: 00000046 RAX: 0000000000000000 RBX: ffff88b01f849700 RCX: ffffffff8127e47e RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff83857ec0 RBP: ffff88afe3e4efc8 R8: ffffed15fc7c9dfa R9: ffffed15fc7c9dfa R10: 0000000000000001 R11: ffffed15fc7c9df9 R12: 0000000000740000 R13: ffff88b01f849708 R14: 0000000000000003 R15: ffffed1603f092e1 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0000 -- <NMI exception stack> -- #5 [ffff88aa841ef778] native_queued_spin_lock_slowpath at ffffffff8127e72b #6 [ffff88aa841ef7b0] _raw_spin_lock_irqsave at ffffffff82c22aa4 #7 [ffff88aa841ef7c8] __wake_up_common_lock at ffffffff81257363 #8 [ffff88aa841ef888] irdma_free_pending_cqp_request at ffffffffa0ba12cc [irdma] #9 [ffff88aa841ef958] irdma_cleanup_pending_cqp_op at ffffffffa0ba1469 [irdma] #10 [ffff88aa841ef9c0] irdma_ctrl_deinit_hw at ffffffffa0b2989f [irdma] #11 [ffff88aa841efa28] irdma_remove at ffffffffa0b252df [irdma] #12 [ffff88aa841efae8] auxiliary_bus_remove at ffffffff8219afdb #13 [ffff88aa841efb00] device_release_driver_internal at ffffffff821882e6 #14 [ffff88aa841efb38] bus_remove_device at ffffffff82184278 #15 [ffff88aa841efb88] device_del at ffffffff82179d23 #16 [ffff88aa841efc48] ice_unplug_aux_dev at ffffffffa0eb1c14 [ice] #17 [ffff88aa841efc68] ice_service_task at ffffffffa0d88201 [ice] #18 [ffff88aa841efde8] process_one_work at ffffffff811c589a #19 [ffff88aa841efe60] worker_thread at ffffffff811c71ff #20 [ffff88aa841eff10] kthread at ffffffff811d87a0 #21 [ffff88aa841eff50] ret_from_fork at ffffffff82e0022f Fixes: 44d9e52 ("RDMA/irdma: Implement device initialization definitions") Link: https://lore.kernel.org/r/20231130081415.891006-1-lishifeng@sangfor.com.cn Suggested-by: "Ismail, Mustafa" <mustafa.ismail@intel.com> Signed-off-by: Shifeng Li <lishifeng@sangfor.com.cn> Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

sg_init_one() relies on linearly mapped low memory for the safe utilization of virt_to_page(). Otherwise, we trigger a kernel BUG, kernel BUG at include/linux/scatterlist.h:187! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM Modules linked in: CPU: 0 PID: 2997 Comm: syz-executor198 Not tainted 6.8.0-syzkaller #0 Hardware name: ARM-Versatile Express PC is at sg_set_buf include/linux/scatterlist.h:187 [inline] PC is at sg_init_one+0x9c/0xa8 lib/scatterlist.c:143 LR is at sg_init_table+0x2c/0x40 lib/scatterlist.c:128 Backtrace: [<807e16ac>] (sg_init_one) from [<804c1824>] (zswap_decompress+0xbc/0x208 mm/zswap.c:1089) r7:83471c80 r6:def6d08c r5:844847d0 r4:ff7e7ef4 [<804c1768>] (zswap_decompress) from [<804c4468>] (zswap_load+0x15c/0x198 mm/zswap.c:1637) r9:8446eb80 r8:8446eb80 r7:8446eb84 r6:def6d08c r5:00000001 r4:844847d0 [<804c430c>] (zswap_load) from [<804b9644>] (swap_read_folio+0xa8/0x498 mm/page_io.c:518) r9:844ac800 r8:835e6c00 r7:00000000 r6:df955d4c r5:00000001 r4:def6d08c [<804b959c>] (swap_read_folio) from [<804bb064>] (swap_cluster_readahead+0x1c4/0x34c mm/swap_state.c:684) r10:00000000 r9:00000007 r8:df955d4b r7:00000000 r6:00000000 r5:00100cca r4:00000001 [<804baea0>] (swap_cluster_readahead) from [<804bb3b8>] (swapin_readahead+0x68/0x4a8 mm/swap_state.c:904) r10:df955eb8 r9:00000000 r8:00100cca r7:84476480 r6:00000001 r5:00000000 r4:00000001 [<804bb350>] (swapin_readahead) from [<8047cde0>] (do_swap_page+0x200/0xcc4 mm/memory.c:4046) r10:00000040 r9:00000000 r8:844ac800 r7:84476480 r6:00000001 r5:00000000 r4:df955eb8 [<8047cbe0>] (do_swap_page) from [<8047e6c4>] (handle_pte_fault mm/memory.c:5301 [inline]) [<8047cbe0>] (do_swap_page) from [<8047e6c4>] (__handle_mm_fault mm/memory.c:5439 [inline]) [<8047cbe0>] (do_swap_page) from [<8047e6c4>] (handle_mm_fault+0x3d8/0x12b8 mm/memory.c:5604) r10:00000040 r9:842b3900 r8:7eb0d000 r7:84476480 r6:7eb0d000 r5:835e6c00 r4:00000254 [<8047e2ec>] (handle_mm_fault) from [<80215d28>] (do_page_fault+0x148/0x3a8 arch/arm/mm/fault.c:326) r10:00000007 r9:842b3900 r8:7eb0d000 r7:00000207 r6:00000254 r5:7eb0d9b4 r4:df955fb0 [<80215be0>] (do_page_fault) from [<80216170>] (do_DataAbort+0x38/0xa8 arch/arm/mm/fault.c:558) r10:7eb0da7c r9:00000000 r8:80215be0 r7:df955fb0 r6:7eb0d9b4 r5:00000207 r4:8261d0e0 [<80216138>] (do_DataAbort) from [<80200e3c>] (__dabt_usr+0x5c/0x60 arch/arm/kernel/entry-armv.S:427) Exception stack(0xdf955fb0 to 0xdf955ff8) 5fa0: 00000000 00000000 22d5f800 0008d158 5fc0: 00000000 7eb0d9a4 00000000 00000109 00000000 00000000 7eb0da7c 7eb0da3c 5fe0: 00000000 7eb0d9a0 00000001 00066bd4 00000010 ffffffff r8:824a9044 r7:835e6c00 r6:ffffffff r5:00000010 r4:00066bd4 Code: 1a000004 e1822003 e8860094 e89da8f0 (e7f001f2) ---[ end trace 0000000000000000 ]--- ---------------- Code disassembly (best guess): 0: 1a000004 bne 0x18 4: e1822003 orr r2, r2, r3 8: e8860094 stm r6, {r2, r4, r7} c: e89da8f0 ldm sp, {r4, r5, r6, r7, fp, sp, pc} * 10: e7f001f2 udf #18 <-- trapping instruction Consequently, we have two choices: either employ kmap_to_page() alongside sg_set_page(), or resort to copying high memory contents to a temporary buffer residing in low memory. However, considering the introduction of the WARN_ON_ONCE in commit ef6e06b ("highmem: fix kmap_to_page() for kmap_local_page() addresses"), which specifically addresses high memory concerns, it appears that memcpy remains the sole viable option. Link: https://lkml.kernel.org/r/20240318234706.95347-1-21cnbao@gmail.com Fixes: 270700d ("mm/zswap: remove the memcpy if acomp is not sleepable") Signed-off-by: Barry Song <v-songbaohua@oppo.com> Reported-by: syzbot+adbc983a1588b7805de3@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/000000000000bbb3d80613f243a6@google.com/ Tested-by: syzbot+adbc983a1588b7805de3@syzkaller.appspotmail.com Acked-by: Yosry Ahmed <yosryahmed@google.com> Reviewed-by: Nhat Pham <nphamcs@gmail.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Chris Li <chrisl@kernel.org> Cc: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

vhost_worker will call tun call backs to receive packets. If too many illegal packets arrives, tun_do_read will keep dumping packet contents. When console is enabled, it will costs much more cpu time to dump packet and soft lockup will be detected. net_ratelimit mechanism can be used to limit the dumping rate. PID: 33036 TASK: ffff949da6f20000 CPU: 23 COMMAND: "vhost-32980" #0 [fffffe00003fce50] crash_nmi_callback at ffffffff89249253 #1 [fffffe00003fce58] nmi_handle at ffffffff89225fa3 #2 [fffffe00003fceb0] default_do_nmi at ffffffff8922642e #3 [fffffe00003fced0] do_nmi at ffffffff8922660d #4 [fffffe00003fcef0] end_repeat_nmi at ffffffff89c01663 [exception RIP: io_serial_in+20] RIP: ffffffff89792594 RSP: ffffa655314979e8 RFLAGS: 00000002 RAX: ffffffff89792500 RBX: ffffffff8af428a0 RCX: 0000000000000000 RDX: 00000000000003fd RSI: 0000000000000005 RDI: ffffffff8af428a0 RBP: 0000000000002710 R8: 0000000000000004 R9: 000000000000000f R10: 0000000000000000 R11: ffffffff8acbf64f R12: 0000000000000020 R13: ffffffff8acbf698 R14: 0000000000000058 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #5 [ffffa655314979e8] io_serial_in at ffffffff89792594 #6 [ffffa655314979e8] wait_for_xmitr at ffffffff89793470 #7 [ffffa65531497a08] serial8250_console_putchar at ffffffff897934f6 #8 [ffffa65531497a20] uart_console_write at ffffffff8978b605 #9 [ffffa65531497a48] serial8250_console_write at ffffffff89796558 #10 [ffffa65531497ac8] console_unlock at ffffffff89316124 #11 [ffffa65531497b10] vprintk_emit at ffffffff89317c07 #12 [ffffa65531497b68] printk at ffffffff89318306 #13 [ffffa65531497bc8] print_hex_dump at ffffffff89650765 #14 [ffffa65531497ca8] tun_do_read at ffffffffc0b06c27 [tun] #15 [ffffa65531497d38] tun_recvmsg at ffffffffc0b06e34 [tun] #16 [ffffa65531497d68] handle_rx at ffffffffc0c5d682 [vhost_net] #17 [ffffa65531497ed0] vhost_worker at ffffffffc0c644dc [vhost] #18 [ffffa65531497f10] kthread at ffffffff892d2e72 #19 [ffffa65531497f50] ret_from_fork at ffffffff89c0022f Fixes: ef3db4a ("tun: avoid BUG, dump packet on GSO errors") Signed-off-by: Lei Chen <lei.chen@smartx.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20240415020247.2207781-1-lei.chen@smartx.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

[ Upstream commit 769e6a1 ] ui_browser__show() is capturing the input title that is stack allocated memory in hist_browser__run(). Avoid a use after return by strdup-ing the string. Committer notes: Further explanation from Ian Rogers: My command line using tui is: $ sudo bash -c 'rm /tmp/asan.log*; export ASAN_OPTIONS="log_path=/tmp/asan.log"; /tmp/perf/perf mem record -a sleep 1; /tmp/perf/perf mem report' I then go to the perf annotate view and quit. This triggers the asan error (from the log file): ``` ==1254591==ERROR: AddressSanitizer: stack-use-after-return on address 0x7f2813331920 at pc 0x7f28180 65991 bp 0x7fff0a21c750 sp 0x7fff0a21bf10 READ of size 80 at 0x7f2813331920 thread T0 #0 0x7f2818065990 in __interceptor_strlen ../../../../src/libsanitizer/sanitizer_common/sanitizer_common_interceptors.inc:461 #1 0x7f2817698251 in SLsmg_write_wrapped_string (/lib/x86_64-linux-gnu/libslang.so.2+0x98251) #2 0x7f28176984b9 in SLsmg_write_nstring (/lib/x86_64-linux-gnu/libslang.so.2+0x984b9) #3 0x55c94045b365 in ui_browser__write_nstring ui/browser.c:60 #4 0x55c94045c558 in __ui_browser__show_title ui/browser.c:266 #5 0x55c94045c776 in ui_browser__show ui/browser.c:288 #6 0x55c94045c06d in ui_browser__handle_resize ui/browser.c:206 #7 0x55c94047979b in do_annotate ui/browsers/hists.c:2458 #8 0x55c94047fb17 in evsel__hists_browse ui/browsers/hists.c:3412 #9 0x55c940480a0c in perf_evsel_menu__run ui/browsers/hists.c:3527 #10 0x55c940481108 in __evlist__tui_browse_hists ui/browsers/hists.c:3613 #11 0x55c9404813f7 in evlist__tui_browse_hists ui/browsers/hists.c:3661 #12 0x55c93ffa253f in report__browse_hists tools/perf/builtin-report.c:671 #13 0x55c93ffa58ca in __cmd_report tools/perf/builtin-report.c:1141 #14 0x55c93ffaf159 in cmd_report tools/perf/builtin-report.c:1805 #15 0x55c94000c05c in report_events tools/perf/builtin-mem.c:374 #16 0x55c94000d96d in cmd_mem tools/perf/builtin-mem.c:516 #17 0x55c9400e44ee in run_builtin tools/perf/perf.c:350 #18 0x55c9400e4a5a in handle_internal_command tools/perf/perf.c:403 #19 0x55c9400e4e22 in run_argv tools/perf/perf.c:447 #20 0x55c9400e53ad in main tools/perf/perf.c:561 #21 0x7f28170456c9 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 #22 0x7f2817045784 in __libc_start_main_impl ../csu/libc-start.c:360 #23 0x55c93ff544c0 in _start (/tmp/perf/perf+0x19a4c0) (BuildId: 84899b0e8c7d3a3eaa67b2eb35e3d8b2f8cd4c93) Address 0x7f2813331920 is located in stack of thread T0 at offset 32 in frame #0 0x55c94046e85e in hist_browser__run ui/browsers/hists.c:746 This frame has 1 object(s): [32, 192) 'title' (line 747) <== Memory access at offset 32 is inside this variable HINT: this may be a false positive if your program uses some custom stack unwind mechanism, swapcontext or vfork ``` hist_browser__run isn't on the stack so the asan error looks legit. There's no clean init/exit on struct ui_browser so I may be trading a use-after-return for a memory leak, but that seems look a good trade anyway. Fixes: 05e8b08 ("perf ui browser: Stop using 'self'") Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Cc: Ben Gainey <ben.gainey@arm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: K Prateek Nayak <kprateek.nayak@amd.com> Cc: Li Dong <lidong@vivo.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Oliver Upton <oliver.upton@linux.dev> Cc: Paran Lee <p4ranlee@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Sun Haiyong <sunhaiyong@loongson.cn> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Yanteng Si <siyanteng@loongson.cn> Cc: Yicong Yang <yangyicong@hisilicon.com> Link: https://lore.kernel.org/r/20240507183545.1236093-2-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

The code in ocfs2_dio_end_io_write() estimates number of necessary transaction credits using ocfs2_calc_extend_credits(). This however does not take into account that the IO could be arbitrarily large and can contain arbitrary number of extents. Extent tree manipulations do often extend the current transaction but not in all of the cases. For example if we have only single block extents in the tree, ocfs2_mark_extent_written() will end up calling ocfs2_replace_extent_rec() all the time and we will never extend the current transaction and eventually exhaust all the transaction credits if the IO contains many single block extents. Once that happens a WARN_ON(jbd2_handle_buffer_credits(handle) <= 0) is triggered in jbd2_journal_dirty_metadata() and subsequently OCFS2 aborts in response to this error. This was actually triggered by one of our customers on a heavily fragmented OCFS2 filesystem. To fix the issue make sure the transaction always has enough credits for one extent insert before each call of ocfs2_mark_extent_written(). Heming Zhao said: ------ PANIC: "Kernel panic - not syncing: OCFS2: (device dm-1): panic forced after error" PID: xxx TASK: xxxx CPU: 5 COMMAND: "SubmitThread-CA" #0 machine_kexec at ffffffff8c069932 #1 __crash_kexec at ffffffff8c1338fa #2 panic at ffffffff8c1d69b9 #3 ocfs2_handle_error at ffffffffc0c86c0c [ocfs2] #4 __ocfs2_abort at ffffffffc0c88387 [ocfs2] #5 ocfs2_journal_dirty at ffffffffc0c51e98 [ocfs2] #6 ocfs2_split_extent at ffffffffc0c27ea3 [ocfs2] #7 ocfs2_change_extent_flag at ffffffffc0c28053 [ocfs2] #8 ocfs2_mark_extent_written at ffffffffc0c28347 [ocfs2] #9 ocfs2_dio_end_io_write at ffffffffc0c2bef9 [ocfs2] #10 ocfs2_dio_end_io at ffffffffc0c2c0f5 [ocfs2] #11 dio_complete at ffffffff8c2b9fa7 #12 do_blockdev_direct_IO at ffffffff8c2bc09f #13 ocfs2_direct_IO at ffffffffc0c2b653 [ocfs2] #14 generic_file_direct_write at ffffffff8c1dcf14 #15 __generic_file_write_iter at ffffffff8c1dd07b #16 ocfs2_file_write_iter at ffffffffc0c49f1f [ocfs2] #17 aio_write at ffffffff8c2cc72e #18 kmem_cache_alloc at ffffffff8c248dde #19 do_io_submit at ffffffff8c2ccada #20 do_syscall_64 at ffffffff8c004984 #21 entry_SYSCALL_64_after_hwframe at ffffffff8c8000ba Link: https://lkml.kernel.org/r/20240617095543.6971-1-jack@suse.cz Link: https://lkml.kernel.org/r/20240614145243.8837-1-jack@suse.cz Fixes: c15471f ("ocfs2: fix sparse file & data ordering issue in direct io") Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Reviewed-by: Heming Zhao <heming.zhao@suse.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

When running BPF selftests (./test_progs -t sockmap_basic) on a Loongarch platform, the following kernel panic occurs: [...] Oops[#1]: CPU: 22 PID: 2824 Comm: test_progs Tainted: G OE 6.10.0-rc2+ #18 Hardware name: LOONGSON Dabieshan/Loongson-TC542F0, BIOS Loongson-UDK2018 ... ... ra: 90000000048bf6c0 sk_msg_recvmsg+0x120/0x560 ERA: 9000000004162774 copy_page_to_iter+0x74/0x1c0 CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) PRMD: 0000000c (PPLV0 +PIE +PWE) EUEN: 00000007 (+FPE +SXE +ASXE -BTE) ECFG: 00071c1d (LIE=0,2-4,10-12 VS=7) ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0) BADV: 0000000000000040 PRID: 0014c011 (Loongson-64bit, Loongson-3C5000) Modules linked in: bpf_testmod(OE) xt_CHECKSUM xt_MASQUERADE xt_conntrack Process test_progs (pid: 2824, threadinfo=0000000000863a31, task=...) Stack : ... Call Trace: [<9000000004162774>] copy_page_to_iter+0x74/0x1c0 [<90000000048bf6c0>] sk_msg_recvmsg+0x120/0x560 [<90000000049f2b90>] tcp_bpf_recvmsg_parser+0x170/0x4e0 [<90000000049aae34>] inet_recvmsg+0x54/0x100 [<900000000481ad5c>] sock_recvmsg+0x7c/0xe0 [<900000000481e1a8>] __sys_recvfrom+0x108/0x1c0 [<900000000481e27c>] sys_recvfrom+0x1c/0x40 [<9000000004c076ec>] do_syscall+0x8c/0xc0 [<9000000003731da4>] handle_syscall+0xc4/0x160 Code: ... ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Fatal exception Kernel relocated by 0x3510000 .text @ 0x9000000003710000 .data @ 0x9000000004d70000 .bss @ 0x9000000006469400 ---[ end Kernel panic - not syncing: Fatal exception ]--- [...] This crash happens every time when running sockmap_skb_verdict_shutdown subtest in sockmap_basic. This crash is because a NULL pointer is passed to page_address() in the sk_msg_recvmsg(). Due to the different implementations depending on the architecture, page_address(NULL) will trigger a panic on Loongarch platform but not on x86 platform. So this bug was hidden on x86 platform for a while, but now it is exposed on Loongarch platform. The root cause is that a zero length skb (skb->len == 0) was put on the queue. This zero length skb is a TCP FIN packet, which was sent by shutdown(), invoked in test_sockmap_skb_verdict_shutdown(): shutdown(p1, SHUT_WR); In this case, in sk_psock_skb_ingress_enqueue(), num_sge is zero, and no page is put to this sge (see sg_set_page in sg_set_page), but this empty sge is queued into ingress_msg list. And in sk_msg_recvmsg(), this empty sge is used, and a NULL page is got by sg_page(sge). Pass this NULL page to copy_page_to_iter(), which passes it to kmap_local_page() and to page_address(), then kernel panics. To solve this, we should skip this zero length skb. So in sk_msg_recvmsg(), if copy is zero, that means it's a zero length skb, skip invoking copy_page_to_iter(). We are using the EFAULT return triggered by copy_page_to_iter to check for is_fin in tcp_bpf.c. Fixes: 604326b ("bpf, sockmap: convert to generic sk_msg interface") Suggested-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/e3a16eacdc6740658ee02a33489b1b9d4912f378.1719992715.git.tanggeliang@kylinos.cn

…the Crashkernel Scenario [ Upstream commit 4058c39 ] The issue is that before entering the crash kernel, the DWC USB controller did not perform operations such as resetting the interrupt mask bits. After entering the crash kernel,before the USB interrupt handler registration was completed while loading the DWC USB driver,an GINTSTS_SOF interrupt was received.This triggered the misroute_irq process within the GIC handling framework,ultimately leading to the misrouting of the interrupt,causing it to be handled by the wrong interrupt handler and resulting in the issue. Summary:In a scenario where the kernel triggers a panic and enters the crash kernel,it is necessary to ensure that the interrupt mask bit is not enabled before the interrupt registration is complete. If an interrupt reaches the CPU at this moment,it will certainly not be handled correctly,especially in cases where this interrupt is reported frequently. Please refer to the Crashkernel dmesg information as follows (the message on line 3 was added before devm_request_irq is called by the dwc2_driver_probe function): [ 5.866837][ T1] dwc2 JMIC0010:01: supply vusb_d not found, using dummy regulator [ 5.874588][ T1] dwc2 JMIC0010:01: supply vusb_a not found, using dummy regulator [ 5.882335][ T1] dwc2 JMIC0010:01: before devm_request_irq irq: [71], gintmsk[0xf300080e], gintsts[0x04200009] [ 5.892686][ C0] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.10.0-jmnd1.2_RC #18 [ 5.900327][ C0] Hardware name: CMSS HyperCard4-25G/HyperCard4-25G, BIOS 1.6.4 Jul 8 2024 [ 5.908836][ C0] Call trace: [ 5.911965][ C0] dump_backtrace+0x0/0x1f0 [ 5.916308][ C0] show_stack+0x20/0x30 [ 5.920304][ C0] dump_stack+0xd8/0x140 [ 5.924387][ C0] pcie_xxx_handler+0x3c/0x1d8 [ 5.930121][ C0] __handle_irq_event_percpu+0x64/0x1e0 [ 5.935506][ C0] handle_irq_event+0x80/0x1d0 [ 5.940109][ C0] try_one_irq+0x138/0x174 [ 5.944365][ C0] misrouted_irq+0x134/0x140 [ 5.948795][ C0] note_interrupt+0x1d0/0x30c [ 5.953311][ C0] handle_irq_event+0x13c/0x1d0 [ 5.958001][ C0] handle_fasteoi_irq+0xd4/0x260 [ 5.962779][ C0] __handle_domain_irq+0x88/0xf0 [ 5.967555][ C0] gic_handle_irq+0x9c/0x2f0 [ 5.971985][ C0] el1_irq+0xb8/0x140 [ 5.975807][ C0] __setup_irq+0x3dc/0x7cc [ 5.980064][ C0] request_threaded_irq+0xf4/0x1b4 [ 5.985015][ C0] devm_request_threaded_irq+0x80/0x100 [ 5.990400][ C0] dwc2_driver_probe+0x1b8/0x6b0 [ 5.995178][ C0] platform_drv_probe+0x5c/0xb0 [ 5.999868][ C0] really_probe+0xf8/0x51c [ 6.004125][ C0] driver_probe_device+0xfc/0x170 [ 6.008989][ C0] device_driver_attach+0xc8/0xd0 [ 6.013853][ C0] __driver_attach+0xe8/0x1b0 [ 6.018369][ C0] bus_for_each_dev+0x7c/0xdc [ 6.022886][ C0] driver_attach+0x2c/0x3c [ 6.027143][ C0] bus_add_driver+0xdc/0x240 [ 6.031573][ C0] driver_register+0x80/0x13c [ 6.036090][ C0] __platform_driver_register+0x50/0x5c [ 6.041476][ C0] dwc2_platform_driver_init+0x24/0x30 [ 6.046774][ C0] do_one_initcall+0x50/0x25c [ 6.051291][ C0] do_initcall_level+0xe4/0xfc [ 6.055894][ C0] do_initcalls+0x80/0xa4 [ 6.060064][ C0] kernel_init_freeable+0x198/0x240 [ 6.065102][ C0] kernel_init+0x1c/0x12c Signed-off-by: Shawn Shao <shawn.shao@jaguarmicro.com> Link: https://lore.kernel.org/r/20240830031709.134-1-shawn.shao@jaguarmicro.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 011e69a upstream. In binder_add_freeze_work() we iterate over the proc->nodes with the proc->inner_lock held. However, this lock is temporarily dropped to acquire the node->lock first (lock nesting order). This can race with binder_deferred_release() which removes the nodes from the proc->nodes rbtree and adds them into binder_dead_nodes list. This leads to a broken iteration in binder_add_freeze_work() as rb_next() will use data from binder_dead_nodes, triggering an out-of-bounds access: ================================================================== BUG: KASAN: global-out-of-bounds in rb_next+0xfc/0x124 Read of size 8 at addr ffffcb84285f7170 by task freeze/660 CPU: 8 UID: 0 PID: 660 Comm: freeze Not tainted 6.11.0-07343-ga727812a8d45 #18 Hardware name: linux,dummy-virt (DT) Call trace: rb_next+0xfc/0x124 binder_add_freeze_work+0x344/0x534 binder_ioctl+0x1e70/0x25ac __arm64_sys_ioctl+0x124/0x190 The buggy address belongs to the variable: binder_dead_nodes+0x10/0x40 [...] ================================================================== This is possible because proc->nodes (rbtree) and binder_dead_nodes (list) share entries in binder_node through a union: struct binder_node { [...] union { struct rb_node rb_node; struct hlist_node dead_node; }; Fix the race by checking that the proc is still alive. If not, simply break out of the iteration. Fixes: d579b04 ("binder: frozen notification") Cc: stable@vger.kernel.org Reviewed-by: Alice Ryhl <aliceryhl@google.com> Acked-by: Todd Kjos <tkjos@google.com> Signed-off-by: Carlos Llamas <cmllamas@google.com> Link: https://lore.kernel.org/r/20240926233632.821189-3-cmllamas@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

chewitt added this to AMLGX Feb 19, 2023

chewitt moved this to Unclaimed in AMLGX Feb 19, 2023

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Add UHS SDIO support to p212/p23x/q20x #18

Add UHS SDIO support to p212/p23x/q20x #18

chewitt commented Feb 19, 2023

Add UHS SDIO support to p212/p23x/q20x #18

Add UHS SDIO support to p212/p23x/q20x #18

Comments

chewitt commented Feb 19, 2023