This modules wraps the excellent community module adds some opinionated configuration, internal DNS, VPC Endpoints etc
This really shows the power of Terraform module composition. This module creates over 30 resources
Plan: 34 to add, 0 to change, 0 to destroy.
You can use it to cookie cutter the same VPC into all of your accounts.
NAT Gateways are required to allow internet access from private subnets. This module creates one per availability zone
to ensure we can still route traffic to the internet in the event of an AZ failure. The high_availablity variable
when set to false will just create a single NAT Gateway for the VPC to save costs.
We create Gateway endpoints to avoid incurring data transfer costs through the NAT Gateway related to S3 and DynamoDB
The default base CIDR of this module is /16 it provides /23 database subnets and /20 public, private and intra subnets
giving us ~4096 hosts per subnet per availability zone. We are using relatively large IP allocations because Lambda
functions can consume a lot of IP addresses, and we don't want to risk IP exhaustion.
We span two availability zones, N+1 redundancy is adequate, and the knock on cost of spanning 3 availability zones is higher:
- More NAT Gateways
- More Aurora Cluster nodes to now span 3 AZs making DB charges 3x instead of 2x for HA.
- More inter AZ traffic which is billable
The database subnet is the smallest /23 network and this module provides an RDS DB subnet group in this subnet.
Resources deployed in this subnet are automatically assigned an ipv4 address and have direct internet access without the need for a NAT Gateway etc. The only resources that should be placed here are public Application Load Balancers etc
Resources in the private subnet are not assigned a public IP and have no inbound access from the internet, outbound access is provided by the NAT Gateway. Most resources for internal services should go here.
This module outputs useful info such as subnet IDs, instead of needing to plumb through outputs 1:1 in whatever root module creates this it probably makes sense to do something like:
output "vpc_outputs" {
value = module.vpc
}