[Github] Improve automatic new issue labelling #2

cor3ntin · 2023-09-05T09:21:23Z

This patch:

Replace andymckay/labeler which does not appear to be maintained by github official solution
Remove the closed issue workflow which was disabled a few years ago and never fixed.
Add a few rules to add label based on PR title, hopefully that can make triaging simpler. If that turns out to be useful, we can consider adding more rules for backends, etc. We could technically also pattern match the body of the issue but I'm concerned about trying to be too clever.

The new system is only triggered on PR open so manual labels should not be removed.

Full disclosure, this was not tested, not sure how testing could be done.

This patch: * Replace andymckay/labeler which does not appear to be maintained by github official solution * Remove the closed issue workflow which was disabled a few years ago and never fixed. * Add a few rules to add label based on PR title, hopefully that can make triaging simpler. If that turns out to be useful, we can consider adding more rules for backends, etc. We could technically also pattern match the body of the issue but I'm concerned about trying to be _too_ clever. The new system is only triggered on PR open so manual labels should not be removed. Full disclosure, this was not tested, not sure how testing could be done.

The new ACLE PR#225[1] now combines the slice parameters for some builtins. This patch is the #2 of 3 patches to update the interface. Slice specifies the ZA slice number directly and needs to be explicity implemented by the "user" with the base register plus the immediate offset [1]https://github.com/ARM-software/acle/pull/225/files

…fine.parallel verifier This patch updates AffineParallelOp::verify() to check each result type matches its corresponding reduction op (i.e, the result type must be a `FloatType` if the reduction attribute is `addf`) affine.parallel will crash on --lower-affine if the corresponding result type cannot match the reduction attribute. ``` %128 = affine.parallel (%arg2, %arg3) = (0, 0) to (8, 7) reduce ("maxf") -> (memref<8x7xf32>) { %alloc_33 = memref.alloc() : memref<8x7xf32> affine.yield %alloc_33 : memref<8x7xf32> } ``` This will crash and report a type conversion issue when we run `mlir-opt --lower-affine` ``` Assertion failed: (isa<To>(Val) && "cast<Ty>() argument of incompatible type!"), function cast, file Casting.h, line 572. PLEASE submit a bug report to https://github.com/llvm/llvm-project/issues/ and include the crash backtrace. Stack dump: 0. Program arguments: mlir-opt --lower-affine temp.mlir #0 0x0000000102a18f18 llvm::sys::PrintStackTrace(llvm::raw_ostream&, int) (/workspacebin/mlir-opt+0x1002f8f18) #1 0x0000000102a171b4 llvm::sys::RunSignalHandlers() (/workspacebin/mlir-opt+0x1002f71b4) #2 0x0000000102a195c4 SignalHandler(int) (/workspacebin/mlir-opt+0x1002f95c4) #3 0x00000001be7894c4 (/usr/lib/system/libsystem_platform.dylib+0x1803414c4) #4 0x00000001be771ee0 (/usr/lib/system/libsystem_pthread.dylib+0x180329ee0) #5 0x00000001be6ac340 (/usr/lib/system/libsystem_c.dylib+0x180264340) #6 0x00000001be6ab754 (/usr/lib/system/libsystem_c.dylib+0x180263754) #7 0x0000000106864790 mlir::arith::getIdentityValueAttr(mlir::arith::AtomicRMWKind, mlir::Type, mlir::OpBuilder&, mlir::Location) (.cold.4) (/workspacebin/mlir-opt+0x104144790) #8 0x0000000102ba66ac mlir::arith::getIdentityValueAttr(mlir::arith::AtomicRMWKind, mlir::Type, mlir::OpBuilder&, mlir::Location) (/workspacebin/mlir-opt+0x1004866ac) #9 0x0000000102ba6910 mlir::arith::getIdentityValue(mlir::arith::AtomicRMWKind, mlir::Type, mlir::OpBuilder&, mlir::Location) (/workspacebin/mlir-opt+0x100486910) ... ``` Fixes llvm#64068 Reviewed By: mehdi_amini Differential Revision: https://reviews.llvm.org/D157985

…tePluginObject After llvm#68052 this function changed from returning a nullptr with `return {};` to returning Expected and hitting `llvm_unreachable` before it could do so. I gather that we're never supposed to call this function, but on Windows we actually do call this function because `interpreter->CreateScriptedProcessInterface()` returns `ScriptedProcessInterface` not `ScriptedProcessPythonInterface`. Likely because `target_sp->GetDebugger().GetScriptInterpreter()` also does not return a Python related class. The previously XFAILed test crashed with: ``` # .---command stderr------------ # | PLEASE submit a bug report to https://github.com/llvm/llvm-project/issues/ and include the crash backtrace. # | Stack dump: # | 0. Program arguments: c:\\users\\tcwg\\david.spickett\\build-llvm\\bin\\lldb-test.exe ir-memory-map C:\\Users\\tcwg\\david.spickett\\build-llvm\\tools\\lldb\\test\\Shell\\Expr\\Output\\TestIRMemoryMapWindows.test.tmp C:\\Users\\tcwg\\david.spickett\\llvm-project\\lldb\\test\\Shell\\Expr/Inputs/ir-memory-map-basic # | 1. HandleCommand(command = "run") # | Exception Code: 0xC000001D # | #0 0x00007ff696b5f588 lldb_private::ScriptedProcessInterface::CreatePluginObject(class llvm::StringRef, class lldb_private::ExecutionContext &, class std::shared_ptr<class lldb_private::StructuredData::Dictionary>, class lldb_private::StructuredData::Generic *) C:\Users\tcwg\david.spickett\llvm-project\lldb\include\lldb\Interpreter\Interfaces\ScriptedProcessInterface.h:28:0 # | #1 0x00007ff696b1d808 llvm::Expected<std::shared_ptr<lldb_private::StructuredData::Generic> >::operator bool C:\Users\tcwg\david.spickett\llvm-project\llvm\include\llvm\Support\Error.h:567:0 # | #2 0x00007ff696b1d808 lldb_private::ScriptedProcess::ScriptedProcess(class std::shared_ptr<class lldb_private::Target>, class std::shared_ptr<class lldb_private::Listener>, class lldb_private::ScriptedMetadata const &, class lldb_private::Status &) C:\Users\tcwg\david.spickett\llvm-project\lldb\source\Plugins\Process\scripted\ScriptedProcess.cpp:115:0 # | #3 0x00007ff696b1d124 std::shared_ptr<lldb_private::ScriptedProcess>::shared_ptr C:\Program Files\Microsoft Visual Studio\2022\Preview\VC\Tools\MSVC\14.35.32124\include\memory:1478:0 # | #4 0x00007ff696b1d124 lldb_private::ScriptedProcess::CreateInstance(class std::shared_ptr<class lldb_private::Target>, class std::shared_ptr<class lldb_private::Listener>, class lldb_private::FileSpec const *, bool) C:\Users\tcwg\david.spickett\llvm-project\lldb\source\Plugins\Process\scripted\ScriptedProcess.cpp:61:0 # | #5 0x00007ff69699c8f4 std::_Ptr_base<lldb_private::Process>::_Move_construct_from C:\Program Files\Microsoft Visual Studio\2022\Preview\VC\Tools\MSVC\14.35.32124\include\memory:1237:0 # | #6 0x00007ff69699c8f4 std::shared_ptr<lldb_private::Process>::shared_ptr C:\Program Files\Microsoft Visual Studio\2022\Preview\VC\Tools\MSVC\14.35.32124\include\memory:1534:0 # | #7 0x00007ff69699c8f4 std::shared_ptr<lldb_private::Process>::operator= C:\Program Files\Microsoft Visual Studio\2022\Preview\VC\Tools\MSVC\14.35.32124\include\memory:1594:0 # | #8 0x00007ff69699c8f4 lldb_private::Process::FindPlugin(class std::shared_ptr<class lldb_private::Target>, class llvm::StringRef, class std::shared_ptr<class lldb_private::Listener>, class lldb_private::FileSpec const *, bool) C:\Users\tcwg\david.spickett\llvm-project\lldb\source\Target\Process.cpp:396:0 # | #9 0x00007ff6969bd708 std::_Ptr_base<lldb_private::Process>::_Move_construct_from C:\Program Files\Microsoft Visual Studio\2022\Preview\VC\Tools\MSVC\14.35.32124\include\memory:1237:0 # | #10 0x00007ff6969bd708 std::shared_ptr<lldb_private::Process>::shared_ptr C:\Program Files\Microsoft Visual Studio\2022\Preview\VC\Tools\MSVC\14.35.32124\include\memory:1534:0 # | #11 0x00007ff6969bd708 std::shared_ptr<lldb_private::Process>::operator= C:\Program Files\Microsoft Visual Studio\2022\Preview\VC\Tools\MSVC\14.35.32124\include\memory:1594:0 # | #12 0x00007ff6969bd708 lldb_private::Target::CreateProcess(class std::shared_ptr<class lldb_private::Listener>, class llvm::StringRef, class lldb_private::FileSpec const *, bool) C:\Users\tcwg\david.spickett\llvm-project\lldb\source\Target\Target.cpp:215:0 # | #13 0x00007ff696b13af0 std::_Ptr_base<lldb_private::Process>::_Ptr_base C:\Program Files\Microsoft Visual Studio\2022\Preview\VC\Tools\MSVC\14.35.32124\include\memory:1230:0 # | #14 0x00007ff696b13af0 std::shared_ptr<lldb_private::Process>::shared_ptr C:\Program Files\Microsoft Visual Studio\2022\Preview\VC\Tools\MSVC\14.35.32124\include\memory:1524:0 # | #15 0x00007ff696b13af0 lldb_private::PlatformWindows::DebugProcess(class lldb_private::ProcessLaunchInfo &, class lldb_private::Debugger &, class lldb_private::Target &, class lldb_private::Status &) C:\Users\tcwg\david.spickett\llvm-project\lldb\source\Plugins\Platform\Windows\PlatformWindows.cpp:495:0 # | #16 0x00007ff6969cf590 std::_Ptr_base<lldb_private::Process>::_Move_construct_from C:\Program Files\Microsoft Visual Studio\2022\Preview\VC\Tools\MSVC\14.35.32124\include\memory:1237:0 # | #17 0x00007ff6969cf590 std::shared_ptr<lldb_private::Process>::shared_ptr C:\Program Files\Microsoft Visual Studio\2022\Preview\VC\Tools\MSVC\14.35.32124\include\memory:1534:0 # | #18 0x00007ff6969cf590 std::shared_ptr<lldb_private::Process>::operator= C:\Program Files\Microsoft Visual Studio\2022\Preview\VC\Tools\MSVC\14.35.32124\include\memory:1594:0 # | #19 0x00007ff6969cf590 lldb_private::Target::Launch(class lldb_private::ProcessLaunchInfo &, class lldb_private::Stream *) C:\Users\tcwg\david.spickett\llvm-project\lldb\source\Target\Target.cpp:3274:0 # | #20 0x00007ff696fff82c CommandObjectProcessLaunch::DoExecute(class lldb_private::Args &, class lldb_private::CommandReturnObject &) C:\Users\tcwg\david.spickett\llvm-project\lldb\source\Commands\CommandObjectProcess.cpp:258:0 # | #21 0x00007ff696fab6c0 lldb_private::CommandObjectParsed::Execute(char const *, class lldb_private::CommandReturnObject &) C:\Users\tcwg\david.spickett\llvm-project\lldb\source\Interpreter\CommandObject.cpp:751:0 # `----------------------------- # error: command failed with exit status: 0xc000001d ``` That might be a bug on the Windows side, or an artifact of how our build is setup, but whatever it is, having `CreatePluginObject` return an error and the caller check it, fixes the failing test. The built lldb can run the script command to use Python, but I'm not sure if that means anything.

…e defintion if available (llvm#71004)" This reverts commit ef3feba. This caused an LLDB test failure on Linux for `lang/cpp/symbols/TestSymbols.test_dwo`: ``` make: Leaving directory '/home/worker/2.0.1/lldb-x86_64-debian/build/lldb-test-build.noindex/lang/cpp/symbols/TestSymbols.test_dwo' runCmd: expression -- D::i PLEASE submit a bug report to https://github.com/llvm/llvm-project/issues/ and include the crash backtrace. Stack dump: 0. HandleCommand(command = "expression -- D::i") 1. <user expression 0>:1:4: current parser token 'i' 2. <lldb wrapper prefix>:44:1: parsing function body '$__lldb_expr' 3. <lldb wrapper prefix>:44:1: in compound statement ('{}') Stack dump without symbol names (ensure you have llvm-symbolizer in your PATH or set the environment var `LLVM_SYMBOLIZER_PATH` to point to it): 0 _lldb.cpython-39-x86_64-linux-gnu.so 0x00007fbcfcb08b87 1 _lldb.cpython-39-x86_64-linux-gnu.so 0x00007fbcfcb067ae 2 _lldb.cpython-39-x86_64-linux-gnu.so 0x00007fbcfcb0923f 3 libpthread.so.0 0x00007fbd07ab7140 ``` And a failure in `TestCallStdStringFunction.py` on Linux aarch64: ``` -- Exit Code: -11 Command Output (stdout): -- lldb version 18.0.0git (https://github.com/llvm/llvm-project.git revision ef3feba) clang revision ef3feba llvm revision ef3feba -- Command Output (stderr): -- PLEASE submit a bug report to https://github.com/llvm/llvm-project/issues/ and include the crash backtrace. Stack dump: 0. HandleCommand(command = "expression str") 1. <lldb wrapper prefix>:45:34: current parser token ';' 2. <lldb wrapper prefix>:44:1: parsing function body '$__lldb_expr' 3. <lldb wrapper prefix>:44:1: in compound statement ('{}') #0 0x0000ffffb72a149c llvm::sys::PrintStackTrace(llvm::raw_ostream&, int) (/home/tcwg-buildbot/worker/lldb-aarch64-ubuntu/build/lib/python3.8/site-packages/lldb/_[lldb.cpython-38-aarch64-linux-gnu.so](http://lldb.cpython-38-aarch64-linux-gnu.so/)+0x58c749c) #1 0x0000ffffb729f458 llvm::sys::RunSignalHandlers() (/home/tcwg-buildbot/worker/lldb-aarch64-ubuntu/build/lib/python3.8/site-packages/lldb/_[lldb.cpython-38-aarch64-linux-gnu.so](http://lldb.cpython-38-aarch64-linux-gnu.so/)+0x58c5458) #2 0x0000ffffb72a1bd0 SignalHandler(int) (/home/tcwg-buildbot/worker/lldb-aarch64-ubuntu/build/lib/python3.8/site-packages/lldb/_[lldb.cpython-38-aarch64-linux-gnu.so](http://lldb.cpython-38-aarch64-linux-gnu.so/)+0x58c7bd0) #3 0x0000ffffbdd9e7dc (linux-vdso.so.1+0x7dc) #4 0x0000ffffb71799d8 lldb_private::plugin::dwarf::SymbolFileDWARF::FindGlobalVariables(lldb_private::ConstString, lldb_private::CompilerDeclContext const&, unsigned int, lldb_private::VariableList&) (/home/tcwg-buildbot/worker/lldb-aarch64-ubuntu/build/lib/python3.8/site-packages/lldb/_[lldb.cpython-38-aarch64-linux-gnu.so](http://lldb.cpython-38-aarch64-linux-gnu.so/)+0x579f9d8) #5 0x0000ffffb7197508 DWARFASTParserClang::FindConstantOnVariableDefinition(lldb_private::plugin::dwarf::DWARFDIE) (/home/tcwg-buildbot/worker/lldb-aarch64-ubuntu/build/lib/python3.8/site-packages/lldb/_[lldb.cpython-38-aarch64-linux-gnu.so](http://lldb.cpython-38-aarch64-linux-gnu.so/)+0x57bd508) ```

The const.cpp testcase fails when running in MSVC mode, while it does succeed in MinGW mode. In MSVC mode, there are more constructor invocations than expected, as the printout looks like this: A(1), this = 0000025597930000 A(1), this = 0000025597930000 f: this = 0000025597930000, val = 1 A(1), this = 0000025597930000 f: this = 0000025597930000, val = 1 ~A, this = 0000025597930000, val = 1 ~A, this = 0000025597930000, val = 1 ~A, this = 0000025597930000, val = 1 While the expected printout looks like this: A(1), this = 000002C903E10000 f: this = 000002C903E10000, val = 1 f: this = 000002C903E10000, val = 1 ~A, this = 000002C903E10000, val = 1 Reapplying llvm#70991 with the XFAIL changed to check the host triple, not the target triple. On an MSVC based build of Clang, but with the default target triple set to PS4/PS5, we will still see the failure. And a Linux based build of Clang that targets PS4/PS5 won't see the issue.

…ooking options for a custom subcommand (llvm#71975) …ooking options for a custom subcommand. (llvm#71776)" This reverts commit b88308b. The build-bot is unhappy (https://lab.llvm.org/buildbot/#/builders/186/builds/13096), `GroupingAndPrefix` fails after `TopLevelOptInSubcommand` (the newly added test). Revert while I look into this (might be related with test sharding but not sure) ``` [----------] 3 tests from CommandLineTest [ RUN ] CommandLineTest.TokenizeWindowsCommandLine2 [ OK ] CommandLineTest.TokenizeWindowsCommandLine2 (0 ms) [ RUN ] CommandLineTest.TopLevelOptInSubcommand [ OK ] CommandLineTest.TopLevelOptInSubcommand (0 ms) [ RUN ] CommandLineTest.GroupingAndPrefix #0 0x00ba8118 llvm::sys::PrintStackTrace(llvm::raw_ostream&, int) (/home/tcwg-buildbot/worker/clang-armv7-global-isel/stage1/unittests/Support/./SupportTests+0x594118) #1 0x00ba5914 llvm::sys::RunSignalHandlers() (/home/tcwg-buildbot/worker/clang-armv7-global-isel/stage1/unittests/Support/./SupportTests+0x591914) #2 0x00ba89c4 SignalHandler(int) (/home/tcwg-buildbot/worker/clang-armv7-global-isel/stage1/unittests/Support/./SupportTests+0x5949c4) #3 0xf7828530 __default_sa_restorer /build/glibc-9MGTF6/glibc-2.31/signal/../sysdeps/unix/sysv/linux/arm/sigrestorer.S:67:0 #4 0x00af91f0 (anonymous namespace)::CommandLineParser::ResetAllOptionOccurrences() (/home/tcwg-buildbot/worker/clang-armv7-global-isel/stage1/unittests/Support/./SupportTests+0x4e51f0) #5 0x00af8e1c llvm::cl::ResetCommandLineParser() (/home/tcwg-buildbot/worker/clang-armv7-global-isel/stage1/unittests/Support/./SupportTests+0x4e4e1c) #6 0x0077cda0 (anonymous namespace)::CommandLineTest_GroupingAndPrefix_Test::TestBody() (/home/tcwg-buildbot/worker/clang-armv7-global-isel/stage1/unittests/Support/./SupportTests+0x168da0) #7 0x00bc5adc testing::Test::Run() (/home/tcwg-buildbot/worker/clang-armv7-global-isel/stage1/unittests/Support/./SupportTests+0x5b1adc) #8 0x00bc6cc0 testing::TestInfo::Run() (/home/tcwg-buildbot/worker/clang-armv7-global-isel/stage1/unittests/Support/./SupportTests+0x5b2cc0) #9 0x00bc7880 testing::TestSuite::Run() (/home/tcwg-buildbot/worker/clang-armv7-global-isel/stage1/unittests/Support/./SupportTests+0x5b3880) #10 0x00bd7974 testing::internal::UnitTestImpl::RunAllTests() (/home/tcwg-buildbot/worker/clang-armv7-global-isel/stage1/unittests/Support/./SupportTests+0x5c3974) #11 0x00bd6ebc testing::UnitTest::Run() (/home/tcwg-buildbot/worker/clang-armv7-global-isel/stage1/unittests/Support/./SupportTests+0x5c2ebc) #12 0x00bb1058 main (/home/tcwg-buildbot/worker/clang-armv7-global-isel/stage1/unittests/Support/./SupportTests+0x59d058) #13 0xf78185a4 __libc_start_main /build/glibc-9MGTF6/glibc-2.31/csu/libc-start.c:342:3 ```

… functions (llvm#72069) Fixes a bug introduced by commit f95b2f1 ("Reland [InstrProf][compiler-rt] Enable MC/DC Support in LLVM Source-based Code Coverage (1/3)") The InstrProfiling pass was refactored when introducing support for MC/DC such that the creation of the data variable was abstracted and called only once per function from ::run(). Because ::run() only iterated over functions there were not fully inlined, and because it only created the data variable for the first intrinsic that it saw, data variables corresponding to functions fully inlined into other instrumented callers would end up without a data variable, resulting in loss of coverage information. This patch does the following: 1.) Move the call of createDataVariable() to getOrCreateRegionCounters() so that the creation of the data variable will happen indirectly either from ::new() or during profile intrinsic lowering when it is needed. This effectively restores the behavior prior to the refactor and ensures that all data variables are created when needed (and not duplicated). 2.) Process all MC/DC bitmap parameter intrinsics in ::run() prior to calling getOrCreateRegionCounters(). This ensures bitmap regions are created for each function including functions that are fully inlined. It also ensures that the bitmap region is created for each function prior to the creation of the data variable because it is referenced by the data variable. Again, duplication is prevented if the same parameter intrinsic is inlined into multiple functions. 3.) No longer pass the MC/DC intrinsic to createDataVariable(). This decouples the creation of the data variable from a specific MC/DC intrinsic. Instead, with #2 above, store the number of bitmap bytes required in the PerFunctionProfileData in the ProfileDataMap along with the function's CounterRegion and BitmapRegion variables. This ties the bitmap information directly to the function to which it belongs, and the data variable created for that function can reference that.

Despite CWG2497 not being resolved, it is reasonable to expect the following code to compile (and which is supported by other compilers) ```cpp template<typename T> constexpr T f(); constexpr int g() { return f<int>(); } // #1 template<typename T> constexpr T f() { return 123; } int k[g()]; // #2 ``` To that end, we eagerly instantiate all referenced specializations of constexpr functions when they are defined. We maintain a map of (pattern, [instantiations]) independant of `PendingInstantiations` to avoid having to iterate that list after each function definition. We should apply the same logic to constexpr variables, but I wanted to keep the PR small. Fixes llvm#73232

…lvm#73463) Despite CWG2497 not being resolved, it is reasonable to expect the following code to compile (and which is supported by other compilers) ```cpp template<typename T> constexpr T f(); constexpr int g() { return f<int>(); } // #1 template<typename T> constexpr T f() { return 123; } int k[g()]; // #2 ``` To that end, we eagerly instantiate all referenced specializations of constexpr functions when they are defined. We maintain a map of (pattern, [instantiations]) independent of `PendingInstantiations` to avoid having to iterate that list after each function definition. We should apply the same logic to constexpr variables, but I wanted to keep the PR small. Fixes llvm#73232

… on (llvm#74207) lld string tail merging interacts badly with ASAN on Windows, as is reported in llvm#62078. A similar error was found when building LLVM with `-DLLVM_USE_SANITIZER=Address`: ```console [2/2] Building GenVT.inc... FAILED: include/llvm/CodeGen/GenVT.inc C:/Dev/llvm-project/Build_asan/include/llvm/CodeGen/GenVT.inc cmd.exe /C "cd /D C:\Dev\llvm-project\Build_asan && C:\Dev\llvm-project\Build_asan\bin\llvm-min-tblgen.exe -gen-vt -I C:/Dev/llvm-project/llvm/include/llvm/CodeGen -IC:/Dev/llvm-project/Build_asan/include -IC:/Dev/llvm-project/llvm/include C:/Dev/llvm-project/llvm/include/llvm/CodeGen/ValueTypes.td --write-if-changed -o include/llvm/CodeGen/GenVT.inc -d include/llvm/CodeGen/GenVT.inc.d" ================================================================= ==31944==ERROR: AddressSanitizer: global-buffer-overflow on address 0x7ff6cff80d20 at pc 0x7ff6cfcc7378 bp 0x00e8bcb8e990 sp 0x00e8bcb8e9d8 READ of size 1 at 0x7ff6cff80d20 thread T0 #0 0x7ff6cfcc7377 in strlen (C:\Dev\llvm-project\Build_asan\bin\llvm-min-tblgen.exe+0x1400a7377) #1 0x7ff6cfde50c2 in operator delete(void *, unsigned __int64) (C:\Dev\llvm-project\Build_asan\bin\llvm-min-tblgen.exe+0x1401c50c2) #2 0x7ff6cfdd75ef in operator delete(void *, unsigned __int64) (C:\Dev\llvm-project\Build_asan\bin\llvm-min-tblgen.exe+0x1401b75ef) #3 0x7ff6cfde59f9 in operator delete(void *, unsigned __int64) (C:\Dev\llvm-project\Build_asan\bin\llvm-min-tblgen.exe+0x1401c59f9) #4 0x7ff6cff03f6c in operator delete(void *, unsigned __int64) (C:\Dev\llvm-project\Build_asan\bin\llvm-min-tblgen.exe+0x1402e3f6c) #5 0x7ff6cfefbcbc in operator delete(void *, unsigned __int64) (C:\Dev\llvm-project\Build_asan\bin\llvm-min-tblgen.exe+0x1402dbcbc) #6 0x7ffb7f247343 (C:\WINDOWS\System32\KERNEL32.DLL+0x180017343) #7 0x7ffb800826b0 (C:\WINDOWS\SYSTEM32\ntdll.dll+0x1800526b0) 0x7ff6cff80d20 is located 31 bytes after global variable '"#error \"ArgKind is not defined\"\n"...' defined in 'C:\Dev\llvm-project\llvm\utils\TableGen\IntrinsicEmitter.cpp' (0x7ff6cff80ce0) of size 33 '"#error \"ArgKind is not defined\"\n"...' is ascii string '#error "ArgKind is not defined" ' 0x7ff6cff80d20 is located 0 bytes inside of global variable '""' defined in 'C:\Dev\llvm-project\llvm\utils\TableGen\IntrinsicEmitter.cpp' (0x7ff6cff80d20) of size 1 '""' is ascii string '' SUMMARY: AddressSanitizer: global-buffer-overflow (C:\Dev\llvm-project\Build_asan\bin\llvm-min-tblgen.exe+0x1400a7377) in strlen Shadow bytes around the buggy address: 0x7ff6cff80a80: 01 f9 f9 f9 f9 f9 f9 f9 00 00 00 00 01 f9 f9 f9 0x7ff6cff80b00: f9 f9 f9 f9 00 00 00 00 00 00 00 00 01 f9 f9 f9 0x7ff6cff80b80: f9 f9 f9 f9 00 00 00 00 01 f9 f9 f9 f9 f9 f9 f9 0x7ff6cff80c00: 00 00 00 00 01 f9 f9 f9 f9 f9 f9 f9 00 00 00 00 0x7ff6cff80c80: 00 00 00 00 01 f9 f9 f9 f9 f9 f9 f9 00 00 00 00 =>0x7ff6cff80d00: 01 f9 f9 f9[f9]f9 f9 f9 00 00 00 00 00 00 00 00 0x7ff6cff80d80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x7ff6cff80e00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x7ff6cff80e80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x7ff6cff80f00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x7ff6cff80f80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Shadow byte legend (one shadow byte represents 8 application bytes): Addressable: 00 Partially addressable: 01 02 03 04 05 06 07 Heap left redzone: fa Freed heap region: fd Stack left redzone: f1 Stack mid redzone: f2 Stack right redzone: f3 Stack after return: f5 Stack use after scope: f8 Global redzone: f9 Global init order: f6 Poisoned by user: f7 Container overflow: fc Array cookie: ac Intra object redzone: bb ASan internal: fe Left alloca redzone: ca Right alloca redzone: cb ==31944==ABORTING ``` This is reproducible with the 17.0.3 release: ```console $ clang-cl --version clang version 17.0.3 Target: x86_64-pc-windows-msvc Thread model: posix InstalledDir: C:\Program Files\LLVM\bin $ cmake -S llvm -B Build -G Ninja -DLLVM_USE_SANITIZER=Address -DCMAKE_C_COMPILER=clang-cl -DCMAKE_CXX_COMPILER=clang-cl -DCMAKE_MSVC_RUNTIME_LIBRARY=MultiThreaded -DCMAKE_BUILD_TYPE=Release $ cd Build $ ninja all ```

Internal builds of the unittests with msan flagged mempcpy_test. ==6862==WARNING: MemorySanitizer: use-of-uninitialized-value #0 0x55e34d7d734a in length llvm-project/libc/src/__support/CPP/string_view.h:41:11 #1 0x55e34d7d734a in string_view llvm-project/libc/src/__support/CPP/string_view.h:71:24 #2 0x55e34d7d734a in __llvm_libc_9999_0_0_git::testing::Test::testStrEq(char const*, char const*, char const*, char const*, __llvm_libc_9999_0_0_git::testing::internal::Location) llvm-project/libc/test/UnitTest/LibcTest.cpp:284:13 #3 0x55e34d7d4e09 in LlvmLibcMempcpyTest_Simple::Run() llvm-project/libc/test/src/string/mempcpy_test.cpp:20:3 #4 0x55e34d7d6dff in __llvm_libc_9999_0_0_git::testing::Test::runTests(char const*) llvm-project/libc/test/UnitTest/LibcTest.cpp:133:8 #5 0x55e34d7d86e0 in main llvm-project/libc/test/UnitTest/LibcTestMain.cpp:21:10 SUMMARY: MemorySanitizer: use-of-uninitialized-value llvm-project/libc/src/__support/CPP/string_view.h:41:11 in length What's going on here is that mempcpy_test.cpp's Simple test is using ASSERT_STREQ with a partially initialized char array. ASSERT_STREQ calls Test::testStrEq which constructs a cpp:string_view. That constructor calls the private method cpp::string_view::length. When built with msan, the loop is transformed into multi-byte access, which then fails upon access. I took a look at libc++'s __constexpr_strlen which just calls __builtin_strlen(). Replacing the implementation of cpp::string_view::length with a call to __builtin_strlen() may still result in out of bounds access when the test is built with msan. It's not safe to use ASSERT_STREQ with a partially initialized array. Initialize the whole array so that the test passes.

We'd like a way to select the current thread by its thread ID (rather than its internal LLDB thread index). This PR adds a `-t` option (`--thread_id` long option) that tells the `thread select` command to interpret the `<thread-index>` argument as a thread ID. Here's an example of it working: ``` michristensen@devbig356 llvm/llvm-project (thread-select-tid) » ../Debug/bin/lldb ~/scratch/cpp/threading/a.out (lldb) target create "/home/michristensen/scratch/cpp/threading/a.out" Current executable set to '/home/michristensen/scratch/cpp/threading/a.out' (x86_64). (lldb) b 18 Breakpoint 1: where = a.out`main + 80 at main.cpp:18:12, address = 0x0000000000000850 (lldb) run Process 215715 launched: '/home/michristensen/scratch/cpp/threading/a.out' (x86_64) This is a thread, i=1 This is a thread, i=2 This is a thread, i=3 This is a thread, i=4 This is a thread, i=5 Process 215715 stopped * thread #1, name = 'a.out', stop reason = breakpoint 1.1 frame #0: 0x0000555555400850 a.out`main at main.cpp:18:12 15 for (int i = 0; i < 5; i++) { 16 pthread_create(&thread_ids[i], NULL, foo, NULL); 17 } -> 18 for (int i = 0; i < 5; i++) { 19 pthread_join(thread_ids[i], NULL); 20 } 21 return 0; (lldb) thread select 2 * thread #2, name = 'a.out' frame #0: 0x00007ffff68f9918 libc.so.6`__nanosleep + 72 libc.so.6`__nanosleep: -> 0x7ffff68f9918 <+72>: cmpq $-0x1000, %rax ; imm = 0xF000 0x7ffff68f991e <+78>: ja 0x7ffff68f9952 ; <+130> 0x7ffff68f9920 <+80>: movl %edx, %edi 0x7ffff68f9922 <+82>: movl %eax, 0xc(%rsp) (lldb) thread info thread #2: tid = 216047, 0x00007ffff68f9918 libc.so.6`__nanosleep + 72, name = 'a.out' (lldb) thread list Process 215715 stopped thread #1: tid = 215715, 0x0000555555400850 a.out`main at main.cpp:18:12, name = 'a.out', stop reason = breakpoint 1.1 * thread #2: tid = 216047, 0x00007ffff68f9918 libc.so.6`__nanosleep + 72, name = 'a.out' thread #3: tid = 216048, 0x00007ffff68f9918 libc.so.6`__nanosleep + 72, name = 'a.out' thread #4: tid = 216049, 0x00007ffff68f9918 libc.so.6`__nanosleep + 72, name = 'a.out' thread #5: tid = 216050, 0x00007ffff68f9918 libc.so.6`__nanosleep + 72, name = 'a.out' thread #6: tid = 216051, 0x00007ffff68f9918 libc.so.6`__nanosleep + 72, name = 'a.out' (lldb) thread select 215715 error: invalid thread #215715. (lldb) thread select -t 215715 * thread #1, name = 'a.out', stop reason = breakpoint 1.1 frame #0: 0x0000555555400850 a.out`main at main.cpp:18:12 15 for (int i = 0; i < 5; i++) { 16 pthread_create(&thread_ids[i], NULL, foo, NULL); 17 } -> 18 for (int i = 0; i < 5; i++) { 19 pthread_join(thread_ids[i], NULL); 20 } 21 return 0; (lldb) thread select -t 216051 * thread #6, name = 'a.out' frame #0: 0x00007ffff68f9918 libc.so.6`__nanosleep + 72 libc.so.6`__nanosleep: -> 0x7ffff68f9918 <+72>: cmpq $-0x1000, %rax ; imm = 0xF000 0x7ffff68f991e <+78>: ja 0x7ffff68f9952 ; <+130> 0x7ffff68f9920 <+80>: movl %edx, %edi 0x7ffff68f9922 <+82>: movl %eax, 0xc(%rsp) (lldb) thread select 3 * thread #3, name = 'a.out' frame #0: 0x00007ffff68f9918 libc.so.6`__nanosleep + 72 libc.so.6`__nanosleep: -> 0x7ffff68f9918 <+72>: cmpq $-0x1000, %rax ; imm = 0xF000 0x7ffff68f991e <+78>: ja 0x7ffff68f9952 ; <+130> 0x7ffff68f9920 <+80>: movl %edx, %edi 0x7ffff68f9922 <+82>: movl %eax, 0xc(%rsp) (lldb) thread select -t 216048 * thread #3, name = 'a.out' frame #0: 0x00007ffff68f9918 libc.so.6`__nanosleep + 72 libc.so.6`__nanosleep: -> 0x7ffff68f9918 <+72>: cmpq $-0x1000, %rax ; imm = 0xF000 0x7ffff68f991e <+78>: ja 0x7ffff68f9952 ; <+130> 0x7ffff68f9920 <+80>: movl %edx, %edi 0x7ffff68f9922 <+82>: movl %eax, 0xc(%rsp) (lldb) thread select --thread_id 216048 * thread #3, name = 'a.out' frame #0: 0x00007ffff68f9918 libc.so.6`__nanosleep + 72 libc.so.6`__nanosleep: -> 0x7ffff68f9918 <+72>: cmpq $-0x1000, %rax ; imm = 0xF000 0x7ffff68f991e <+78>: ja 0x7ffff68f9952 ; <+130> 0x7ffff68f9920 <+80>: movl %edx, %edi 0x7ffff68f9922 <+82>: movl %eax, 0xc(%rsp) (lldb) help thread select Change the currently selected thread. Syntax: thread select <cmd-options> <thread-index> Command Options Usage: thread select [-t] <thread-index> -t ( --thread_id ) Provide a thread ID instead of a thread index. This command takes options and free-form arguments. If your arguments resemble option specifiers (i.e., they start with a - or --), you must use ' -- ' between the end of the command options and the beginning of the arguments. (lldb) c Process 215715 resuming Process 215715 exited with status = 0 (0x00000000) ```

Linalg op fusion (`Linalg/Transforms/Fusion.cpp`) used to generate invalid fused producer ops: ``` error: 'linalg.conv_2d_nhwc_hwcf' op expected type of operand #2 ('tensor<1x8x16x4xf32>') to match type of corresponding result ('tensor<?x?x?x?xf32>') note: see current operation: %24 = "linalg.conv_2d_nhwc_hwcf"(%21, %22, %23) <{dilations = dense<1> : tensor<2xi64>, operandSegmentSizes = array<i32: 2, 1>, strides = dense<2> : tensor<2xi64>}> ({ ^bb0(%arg9: f32, %arg10: f32, %arg11: f32): %28 = "arith.mulf"(%arg9, %arg10) <{fastmath = #arith.fastmath<none>}> : (f32, f32) -> f32 %29 = "arith.addf"(%arg11, %28) <{fastmath = #arith.fastmath<none>}> : (f32, f32) -> f32 "linalg.yield"(%29) : (f32) -> () }) {linalg.memoized_indexing_maps = [affine_map<(d0, d1, d2, d3, d4, d5, d6) -> (d0, d1 * 2 + d4, d2 * 2 + d5, d6)>, affine_map<(d0, d1, d2, d3, d4, d5, d6) -> (d4, d5, d6, d3)>, affine_map<(d0, d1, d2, d3, d4, d5, d6) -> (d0, d1, d2, d3)>]} : (tensor<1x?x?x3xf32>, tensor<3x3x3x4xf32>, tensor<1x8x16x4xf32>) -> tensor<?x?x?x?xf32> ``` This is a problem because the input IR to greedy pattern rewriter during `-test-linalg-greedy-fusion` is invalid. This commit fixes tests such as `mlir/test/Dialect/Linalg/tile-and-fuse-tensors.mlir` when verifying the IR after each pattern application (llvm#74270).

This has been flaky for a while, for example https://lab.llvm.org/buildbot/#/builders/96/builds/50350 ``` Command Output (stdout): -- lldb version 18.0.0git (https://github.com/llvm/llvm-project.git revision 3974d89) clang revision 3974d89 llvm revision 3974d89 "can't evaluate expressions when the process is running." ``` ``` PLEASE submit a bug report to https://github.com/llvm/llvm-project/issues/ and include the crash backtrace. #0 0x0000ffffa46191a0 llvm::sys::PrintStackTrace(llvm::raw_ostream&, int) (/home/tcwg-buildbot/worker/lldb-aarch64-ubuntu/build/lib/python3.8/site-packages/lldb/_lldb.cpython-38-aarch64-linux-gnu.so+0x529a1a0) #1 0x0000ffffa4617144 llvm::sys::RunSignalHandlers() (/home/tcwg-buildbot/worker/lldb-aarch64-ubuntu/build/lib/python3.8/site-packages/lldb/_lldb.cpython-38-aarch64-linux-gnu.so+0x5298144) #2 0x0000ffffa46198d0 SignalHandler(int) (/home/tcwg-buildbot/worker/lldb-aarch64-ubuntu/build/lib/python3.8/site-packages/lldb/_lldb.cpython-38-aarch64-linux-gnu.so+0x529a8d0) #3 0x0000ffffab25b7dc (linux-vdso.so.1+0x7dc) #4 0x0000ffffab13d050 /build/glibc-Q8DG8B/glibc-2.31/string/../sysdeps/aarch64/multiarch/memcpy_advsimd.S:92:0 #5 0x0000ffffa446f420 lldb_private::process_gdb_remote::GDBRemoteRegisterContext::PrivateSetRegisterValue(unsigned int, llvm::ArrayRef<unsigned char>) (/home/tcwg-buildbot/worker/lldb-aarch64-ubuntu/build/lib/python3.8/site-packages/lldb/_lldb.cpython-38-aarch64-linux-gnu.so+0x50f0420) #6 0x0000ffffa446f7b8 lldb_private::process_gdb_remote::GDBRemoteRegisterContext::GetPrimordialRegister(lldb_private::RegisterInfo const*, lldb_private::process_gdb_remote::GDBRemoteCommunicationClient&) (/home/tcwg-buildbot/worker/lldb-aarch64-ubuntu/build/lib/python3.8/site-packages/lldb/_lldb.cpython-38-aarch64-linux-gnu.so+0x50f07b8) #7 0x0000ffffa446f308 lldb_private::process_gdb_remote::GDBRemoteRegisterContext::ReadRegisterBytes(lldb_private::RegisterInfo const*) (/home/tcwg-buildbot/worker/lldb-aarch64-ubuntu/build/lib/python3.8/site-packages/lldb/_lldb.cpython-38-aarch64-linux-gnu.so+0x50f0308) #8 0x0000ffffa446ec1c lldb_private::process_gdb_remote::GDBRemoteRegisterContext::ReadRegister(lldb_private::RegisterInfo const*, lldb_private::RegisterValue&) (/home/tcwg-buildbot/worker/lldb-aarch64-ubuntu/build/lib/python3.8/site-packages/lldb/_lldb.cpython-38-aarch64-linux-gnu.so+0x50efc1c) #9 0x0000ffffa412eaa4 lldb_private::RegisterContext::ReadRegisterAsUnsigned(lldb_private::RegisterInfo const*, unsigned long) (/home/tcwg-buildbot/worker/lldb-aarch64-ubuntu/build/lib/python3.8/site-packages/lldb/_lldb.cpython-38-aarch64-linux-gnu.so+0x4dafaa4) #10 0x0000ffffa420861c ReadLinuxProcessAddressMask(std::shared_ptr<lldb_private::Process>, llvm::StringRef) (/home/tcwg-buildbot/worker/lldb-aarch64-ubuntu/build/lib/python3.8/site-packages/lldb/_lldb.cpython-38-aarch64-linux-gnu.so+0x4e8961c) #11 0x0000ffffa4208430 ABISysV_arm64::FixCodeAddress(unsigned long) (/home/tcwg-buildbot/worker/lldb-aarch64-ubuntu/build/lib/python3.8/site-packages/lldb/_lldb.cpython-38-aarch64-linux-gnu.so+0x4e89430) ``` Judging by the backtrace something is trying to read the pointer authentication address/code mask registers. This explains why I've not seen this issue locally, as the buildbot runs on Graviton 3 with has the pointer authentication extension. I will try to reproduce, fix and re-enable the test.

…vm#75394) Calling one of pthread join/detach interceptor on an already joined/detached thread causes asserts such as: AddressSanitizer: CHECK failed: sanitizer_thread_arg_retval.cpp:56 "((t)) != (0)" (0x0, 0x0) (tid=1236094) #0 0x555555634f8b in __asan::CheckUnwind() compiler-rt/lib/asan/asan_rtl.cpp:69:3 #1 0x55555564e06e in __sanitizer::CheckFailed(char const*, int, char const*, unsigned long long, unsigned long long) compiler-rt/lib/sanitizer_common/sanitizer_termination.cpp:86:24 #2 0x5555556491df in __sanitizer::ThreadArgRetval::BeforeJoin(unsigned long) const compiler-rt/lib/sanitizer_common/sanitizer_thread_arg_retval.cpp:56:3 #3 0x5555556198ed in Join<___interceptor_pthread_tryjoin_np(void*, void**)::<lambda()> > compiler-rt/lib/asan/../sanitizer_common/sanitizer_thread_arg_retval.h:74:26 #4 0x5555556198ed in pthread_tryjoin_np compiler-rt/lib/asan/asan_interceptors.cpp:311:29 The assert are replaced by error codes.

Add custom combine to lower load <3 x i8> as the more efficient sequence below: ldrb wX, [x0, #2] ldrh wY, [x0] orr wX, wY, wX, lsl #16 fmov s0, wX At the moment, there are almost no cases in which such vector operations will be generated automatically. The motivating case is non-power-of-2 SLP vectorization: llvm#77790

The concurrent tests all do a pthread_join at the end, and concurrent_base.py stops after that pthread_join and sanity checks that only 1 thread is running. On macOS, after pthread_join() has completed, there can be an extra thread still running which is completing the details of that task asynchronously; this causes testsuite failures. When this happens, we see the second thread is in ``` frame #0: 0x0000000180ce7700 libsystem_kernel.dylib`__ulock_wake + 8 frame #1: 0x0000000180d25ad4 libsystem_pthread.dylib`_pthread_joiner_wake + 52 frame #2: 0x0000000180d23c18 libsystem_pthread.dylib`_pthread_terminate + 384 frame #3: 0x0000000180d23a98 libsystem_pthread.dylib`_pthread_terminate_invoke + 92 frame #4: 0x0000000180d26740 libsystem_pthread.dylib`_pthread_exit + 112 frame #5: 0x0000000180d26040 libsystem_pthread.dylib`_pthread_start + 148 ``` there are none of the functions from the test file present on this thread. In this patch, instead of counting the number of threads, I iterate over the threads looking for functions from our test file (by name) and only count threads that have at least one of them. It's a lower frequency failure than the darwin kernel bug causing an extra step instruction mach exception when hardware breakpoint/watchpoints are used, but once I fixed that, this came up as the next most common failure for these tests. rdar://110555062

@0

…lvm#80904)" This reverts commit b1ac052. This commit breaks coroutine splitting for non-swift calling convention functions. In this example: ```ll ; ModuleID = 'repro.ll' source_filename = "stdlib/test/runtime/test_llcl.mojo" target datalayout = "e-m:e-p270:32:32-p271:32:32-p272:64:64-i64:64-i128:128-f80:128-n8:16:32:64-S128" target triple = "x86_64-unknown-linux-gnu" @0 = internal constant { i32, i32 } { i32 trunc (i64 sub (i64 ptrtoint (ptr @craSH to i64), i64 ptrtoint (ptr getelementptr inbounds ({ i32, i32 }, ptr @0, i32 0, i32 1) to i64)) to i32), i32 64 } define dso_local void @af_suspend_fn(ptr %0, i64 %1, ptr %2) #0 { ret void } define dso_local void @craSH(ptr %0) #0 { %2 = call token @llvm.coro.id.async(i32 64, i32 8, i32 0, ptr @0) %3 = call ptr @llvm.coro.begin(token %2, ptr null) %4 = getelementptr inbounds { ptr, { ptr, ptr }, i64, { ptr, i1 }, i64, i64 }, ptr poison, i32 0, i32 0 %5 = call ptr @llvm.coro.async.resume() store ptr %5, ptr %4, align 8 %6 = call { ptr, ptr, ptr } (i32, ptr, ptr, ...) @llvm.coro.suspend.async.sl_p0p0p0s(i32 0, ptr %5, ptr @ctxt_proj_fn, ptr @af_suspend_fn, ptr poison, i64 -1, ptr poison) ret void } define dso_local ptr @ctxt_proj_fn(ptr %0) #0 { ret ptr %0 } ; Function Attrs: nomerge nounwind declare { ptr, ptr, ptr } @llvm.coro.suspend.async.sl_p0p0p0s(i32, ptr, ptr, ...) #1 ; Function Attrs: nounwind declare token @llvm.coro.id.async(i32, i32, i32, ptr) #2 ; Function Attrs: nounwind declare ptr @llvm.coro.begin(token, ptr writeonly) #2 ; Function Attrs: nomerge nounwind declare ptr @llvm.coro.async.resume() #1 attributes #0 = { "target-features"="+adx,+aes,+avx,+avx2,+bmi,+bmi2,+clflushopt,+clwb,+clzero,+crc32,+cx16,+cx8,+f16c,+fma,+fsgsbase,+fxsr,+invpcid,+lzcnt,+mmx,+movbe,+mwaitx,+pclmul,+pku,+popcnt,+prfchw,+rdpid,+rdpru,+rdrnd,+rdseed,+sahf,+sha,+sse,+sse2,+sse3,+sse4.1,+sse4.2,+sse4a,+ssse3,+vaes,+vpclmulqdq,+wbnoinvd,+x87,+xsave,+xsavec,+xsaveopt,+xsaves" } attributes #1 = { nomerge nounwind } attributes #2 = { nounwind } ``` This verifier crashes after the `coro-split` pass with ``` cannot guarantee tail call due to mismatched parameter counts musttail call void @af_suspend_fn(ptr poison, i64 -1, ptr poison) LLVM ERROR: Broken function PLEASE submit a bug report to https://github.com/llvm/llvm-project/issues/ and include the crash backtrace. Stack dump: 0. Program arguments: opt ../../../reduced.ll -O0 #0 0x00007f1d89645c0e __interceptor_backtrace.part.0 /build/gcc-11-XeT9lY/gcc-11-11.4.0/build/x86_64-linux-gnu/libsanitizer/asan/../../../../src/libsanitizer/sanitizer_common/sanitizer_common_interceptors.inc:4193:28 #1 0x0000556d94d254f7 llvm::sys::PrintStackTrace(llvm::raw_ostream&, int) /home/ubuntu/modular/third-party/llvm-project/llvm/lib/Support/Unix/Signals.inc:723:22 #2 0x0000556d94d19a2f llvm::sys::RunSignalHandlers() /home/ubuntu/modular/third-party/llvm-project/llvm/lib/Support/Signals.cpp:105:20 #3 0x0000556d94d1aa42 SignalHandler(int) /home/ubuntu/modular/third-party/llvm-project/llvm/lib/Support/Unix/Signals.inc:371:36 #4 0x00007f1d88e42520 (/lib/x86_64-linux-gnu/libc.so.6+0x42520) #5 0x00007f1d88e969fc __pthread_kill_implementation ./nptl/pthread_kill.c:44:76 #6 0x00007f1d88e969fc __pthread_kill_internal ./nptl/pthread_kill.c:78:10 #7 0x00007f1d88e969fc pthread_kill ./nptl/pthread_kill.c:89:10 #8 0x00007f1d88e42476 gsignal ./signal/../sysdeps/posix/raise.c:27:6 #9 0x00007f1d88e287f3 abort ./stdlib/abort.c:81:7 #10 0x0000556d8944be01 std::vector<llvm::json::Value, std::allocator<llvm::json::Value>>::size() const /usr/include/c++/11/bits/stl_vector.h:919:40 #11 0x0000556d8944be01 bool std::operator==<llvm::json::Value, std::allocator<llvm::json::Value>>(std::vector<llvm::json::Value, std::allocator<llvm::json::Value>> const&, std::vector<llvm::json::Value, std::allocator<llvm::json::Value>> const&) /usr/include/c++/11/bits/stl_vector.h:1893:23 #12 0x0000556d8944be01 llvm::json::operator==(llvm::json::Array const&, llvm::json::Array const&) /home/ubuntu/modular/third-party/llvm-project/llvm/include/llvm/Support/JSON.h:572:69 #13 0x0000556d8944be01 llvm::json::operator==(llvm::json::Value const&, llvm::json::Value const&) (.cold) /home/ubuntu/modular/third-party/llvm-project/llvm/lib/Support/JSON.cpp:204:28 #14 0x0000556d949ed2bd llvm::report_fatal_error(char const*, bool) /home/ubuntu/modular/third-party/llvm-project/llvm/lib/Support/ErrorHandling.cpp:82:70 #15 0x0000556d8e37e876 llvm::SmallVectorBase<unsigned int>::size() const /home/ubuntu/modular/third-party/llvm-project/llvm/include/llvm/ADT/SmallVector.h:91:32 #16 0x0000556d8e37e876 llvm::SmallVectorTemplateCommon<llvm::DiagnosticInfoOptimizationBase::Argument, void>::end() /home/ubuntu/modular/third-party/llvm-project/llvm/include/llvm/ADT/SmallVector.h:282:41 #17 0x0000556d8e37e876 llvm::SmallVector<llvm::DiagnosticInfoOptimizationBase::Argument, 4u>::~SmallVector() /home/ubuntu/modular/third-party/llvm-project/llvm/include/llvm/ADT/SmallVector.h:1215:24 #18 0x0000556d8e37e876 llvm::DiagnosticInfoOptimizationBase::~DiagnosticInfoOptimizationBase() /home/ubuntu/modular/third-party/llvm-project/llvm/include/llvm/IR/DiagnosticInfo.h:413:7 #19 0x0000556d8e37e876 llvm::DiagnosticInfoIROptimization::~DiagnosticInfoIROptimization() /home/ubuntu/modular/third-party/llvm-project/llvm/include/llvm/IR/DiagnosticInfo.h:622:7 #20 0x0000556d8e37e876 llvm::OptimizationRemark::~OptimizationRemark() /home/ubuntu/modular/third-party/llvm-project/llvm/include/llvm/IR/DiagnosticInfo.h:689:7 #21 0x0000556d8e37e876 operator() /home/ubuntu/modular/third-party/llvm-project/llvm/lib/Transforms/Coroutines/CoroSplit.cpp:2213:14 #22 0x0000556d8e37e876 emit<llvm::CoroSplitPass::run(llvm::LazyCallGraph::SCC&, llvm::CGSCCAnalysisManager&, llvm::LazyCallGraph&, llvm::CGSCCUpdateResult&)::<lambda()> > /home/ubuntu/modular/third-party/llvm-project/llvm/include/llvm/Analysis/OptimizationRemarkEmitter.h:83:12 #23 0x0000556d8e37e876 llvm::CoroSplitPass::run(llvm::LazyCallGraph::SCC&, llvm::AnalysisManager<llvm::LazyCallGraph::SCC, llvm::LazyCallGraph&>&, llvm::LazyCallGraph&, llvm::CGSCCUpdateResult&) /home/ubuntu/modular/third-party/llvm-project/llvm/lib/Transforms/Coroutines/CoroSplit.cpp:2212:13 #24 0x0000556d8c36ecb1 llvm::detail::PassModel<llvm::LazyCallGraph::SCC, llvm::CoroSplitPass, llvm::AnalysisManager<llvm::LazyCallGraph::SCC, llvm::LazyCallGraph&>, llvm::LazyCallGraph&, llvm::CGSCCUpdateResult&>::run(llvm::LazyCallGraph::SCC&, llvm::AnalysisManager<llvm::LazyCallGraph::SCC, llvm::LazyCallGraph&>&, llvm::LazyCallGraph&, llvm::CGSCCUpdateResult&) /home/ubuntu/modular/third-party/llvm-project/llvm/include/llvm/IR/PassManagerInternal.h:91:3 #25 0x0000556d91c1a84f llvm::PassManager<llvm::LazyCallGraph::SCC, llvm::AnalysisManager<llvm::LazyCallGraph::SCC, llvm::LazyCallGraph&>, llvm::LazyCallGraph&, llvm::CGSCCUpdateResult&>::run(llvm::LazyCallGraph::SCC&, llvm::AnalysisManager<llvm::LazyCallGraph::SCC, llvm::LazyCallGraph&>&, llvm::LazyCallGraph&, llvm::CGSCCUpdateResult&) /home/ubuntu/modular/third-party/llvm-project/llvm/lib/Analysis/CGSCCPassManager.cpp:90:12 #26 0x0000556d8c3690d1 llvm::detail::PassModel<llvm::LazyCallGraph::SCC, llvm::PassManager<llvm::LazyCallGraph::SCC, llvm::AnalysisManager<llvm::LazyCallGraph::SCC, llvm::LazyCallGraph&>, llvm::LazyCallGraph&, llvm::CGSCCUpdateResult&>, llvm::AnalysisManager<llvm::LazyCallGraph::SCC, llvm::LazyCallGraph&>, llvm::LazyCallGraph&, llvm::CGSCCUpdateResult&>::run(llvm::LazyCallGraph::SCC&, llvm::AnalysisManager<llvm::LazyCallGraph::SCC, llvm::LazyCallGraph&>&, llvm::LazyCallGraph&, llvm::CGSCCUpdateResult&) /home/ubuntu/modular/third-party/llvm-project/llvm/include/llvm/IR/PassManagerInternal.h:91:3 #27 0x0000556d91c2162d llvm::ModuleToPostOrderCGSCCPassAdaptor::run(llvm::Module&, llvm::AnalysisManager<llvm::Module>&) /home/ubuntu/modular/third-party/llvm-project/llvm/lib/Analysis/CGSCCPassManager.cpp:278:18 #28 0x0000556d8c369035 llvm::detail::PassModel<llvm::Module, llvm::ModuleToPostOrderCGSCCPassAdaptor, llvm::AnalysisManager<llvm::Module>>::run(llvm::Module&, llvm::AnalysisManager<llvm::Module>&) /home/ubuntu/modular/third-party/llvm-project/llvm/include/llvm/IR/PassManagerInternal.h:91:3 #29 0x0000556d9457abc5 llvm::PassManager<llvm::Module, llvm::AnalysisManager<llvm::Module>>::run(llvm::Module&, llvm::AnalysisManager<llvm::Module>&) /home/ubuntu/modular/third-party/llvm-project/llvm/include/llvm/IR/PassManager.h:247:20 #30 0x0000556d8e30979e llvm::CoroConditionalWrapper::run(llvm::Module&, llvm::AnalysisManager<llvm::Module>&) /home/ubuntu/modular/third-party/llvm-project/llvm/lib/Transforms/Coroutines/CoroConditionalWrapper.cpp:19:74 #31 0x0000556d8c365755 llvm::detail::PassModel<llvm::Module, llvm::CoroConditionalWrapper, llvm::AnalysisManager<llvm::Module>>::run(llvm::Module&, llvm::AnalysisManager<llvm::Module>&) /home/ubuntu/modular/third-party/llvm-project/llvm/include/llvm/IR/PassManagerInternal.h:91:3 #32 0x0000556d9457abc5 llvm::PassManager<llvm::Module, llvm::AnalysisManager<llvm::Module>>::run(llvm::Module&, llvm::AnalysisManager<llvm::Module>&) /home/ubuntu/modular/third-party/llvm-project/llvm/include/llvm/IR/PassManager.h:247:20 #33 0x0000556d89818556 llvm::SmallPtrSetImplBase::isSmall() const /home/ubuntu/modular/third-party/llvm-project/llvm/include/llvm/ADT/SmallPtrSet.h:196:33 #34 0x0000556d89818556 llvm::SmallPtrSetImplBase::~SmallPtrSetImplBase() /home/ubuntu/modular/third-party/llvm-project/llvm/include/llvm/ADT/SmallPtrSet.h:84:17 #35 0x0000556d89818556 llvm::SmallPtrSetImpl<llvm::AnalysisKey*>::~SmallPtrSetImpl() /home/ubuntu/modular/third-party/llvm-project/llvm/include/llvm/ADT/SmallPtrSet.h:321:7 #36 0x0000556d89818556 llvm::SmallPtrSet<llvm::AnalysisKey*, 2u>::~SmallPtrSet() /home/ubuntu/modular/third-party/llvm-project/llvm/include/llvm/ADT/SmallPtrSet.h:427:7 #37 0x0000556d89818556 llvm::PreservedAnalyses::~PreservedAnalyses() /home/ubuntu/modular/third-party/llvm-project/llvm/include/llvm/IR/Analysis.h:109:7 #38 0x0000556d89818556 llvm::runPassPipeline(llvm::StringRef, llvm::Module&, llvm::TargetMachine*, llvm::TargetLibraryInfoImpl*, llvm::ToolOutputFile*, llvm::ToolOutputFile*, llvm::ToolOutputFile*, llvm::StringRef, llvm::ArrayRef<llvm::PassPlugin>, llvm::ArrayRef<std::function<void (llvm::PassBuilder&)>>, llvm::opt_tool::OutputKind, llvm::opt_tool::VerifierKind, bool, bool, bool, bool, bool, bool, bool) /home/ubuntu/modular/third-party/llvm-project/llvm/tools/opt/NewPMDriver.cpp:532:10 #39 0x0000556d897e3939 optMain /home/ubuntu/modular/third-party/llvm-project/llvm/tools/opt/optdriver.cpp:737:27 #40 0x0000556d89455461 main /home/ubuntu/modular/third-party/llvm-project/llvm/tools/opt/opt.cpp:25:33 #41 0x00007f1d88e29d90 __libc_start_call_main ./csu/../sysdeps/nptl/libc_start_call_main.h:58:16 #42 0x00007f1d88e29e40 call_init ./csu/../csu/libc-start.c:128:20 #43 0x00007f1d88e29e40 __libc_start_main ./csu/../csu/libc-start.c:379:5 #44 0x0000556d897b6335 _start (/home/ubuntu/modular/.derived/third-party/llvm-project/build-relwithdebinfo-asan/bin/opt+0x150c335) Aborted (core dumped)

…ter partial ordering when determining primary template (llvm#82417) Consider the following: ``` struct A { static constexpr bool x = true; }; template<typename T, typename U> void f(T, U) noexcept(T::y); // #1, error: no member named 'y' in 'A' template<typename T, typename U> void f(T, U*) noexcept(T::x); // #2 template<> void f(A, int*) noexcept; // explicit specialization of #2 ``` We currently instantiate the exception specification of all candidate function template specializations when deducting template arguments for an explicit specialization, which results in a error despite `#1` not being selected by partial ordering as the most specialized template. According to [except.spec] p13: > An exception specification is considered to be needed when: > - [...] > - the exception specification is compared to that of another declaration (e.g., an explicit specialization or an overriding virtual function); Assuming that "comparing declarations" means "determining whether the declarations correspond and declare the same entity" (per [basic.scope.scope] p4 and [basic.link] p11.1, respectively), the exception specification does _not_ need to be instantiated until _after_ partial ordering, at which point we determine whether the implicitly instantiated specialization and the explicit specialization declare the same entity (the determination of whether two functions/function templates correspond does not consider the exception specifications). This patch defers the instantiation of the exception specification until a single function template specialization is selected via partial ordering, matching the behavior of GCC, EDG, and MSVC: see https://godbolt.org/z/Ebb6GTcWE.

…e exception specification of a function (llvm#90760) [temp.deduct.general] p6 states: > At certain points in the template argument deduction process it is necessary to take a function type that makes use of template parameters and replace those template parameters with the corresponding template arguments. This is done at the beginning of template argument deduction when any explicitly specified template arguments are substituted into the function type, and again at the end of template argument deduction when any template arguments that were deduced or obtained from default arguments are substituted. [temp.deduct.general] p7 goes on to say: > The _deduction substitution loci_ are > - the function type outside of the _noexcept-specifier_, > - the explicit-specifier, > - the template parameter declarations, and > - the template argument list of a partial specialization > > The substitution occurs in all types and expressions that are used in the deduction substitution loci. [...] Consider the following: ```cpp struct A { static constexpr bool x = true; }; template<typename T, typename U> void f(T, U) noexcept(T::x); // #1 template<typename T, typename U> void f(T, U*) noexcept(T::y); // #2 template<> void f<A>(A, int*) noexcept; // clang currently accepts, GCC and EDG reject ``` Currently, `Sema::SubstituteExplicitTemplateArguments` will substitute into the _noexcept-specifier_ when deducing template arguments from a function declaration or when deducing template arguments for taking the address of a function template (and the substitution is treated as a SFINAE context). In the above example, `#1` is selected as the primary template because substitution of the explicit template arguments into the _noexcept-specifier_ of `#2` failed, which resulted in the candidate being ignored. This behavior is incorrect ([temp.deduct.general] note 4 says as much), and this patch corrects it by deferring all substitution into the _noexcept-specifier_ until it is instantiated. As part of the necessary changes to make this patch work, the instantiation of the exception specification of a function template specialization when taking the address of a function template is changed to only occur for the function selected by overload resolution per [except.spec] p13.1 (as opposed to being instantiated for every candidate).

…ined member functions & member function templates (llvm#88963) Consider the following snippet from the discussion of CWG2847 on the core reflector: ``` template<typename T> concept C = sizeof(T) <= sizeof(long); template<typename T> struct A { template<typename U> void f(U) requires C<U>; // #1, declares a function template void g() requires C<T>; // #2, declares a function template<> void f(char); // #3, an explicit specialization of a function template that declares a function }; template<> template<typename U> void A<short>::f(U) requires C<U>; // #4, an explicit specialization of a function template that declares a function template template<> template<> void A<int>::f(int); // #5, an explicit specialization of a function template that declares a function template<> void A<long>::g(); // #6, an explicit specialization of a function that declares a function ``` A number of problems exist: - Clang rejects `#4` because the trailing _requires-clause_ has `U` substituted with the wrong template parameter depth when `Sema::AreConstraintExpressionsEqual` is called to determine whether it matches the trailing _requires-clause_ of the implicitly instantiated function template. - Clang rejects `#5` because the function template specialization instantiated from `A<int>::f` has a trailing _requires-clause_, but `#5` does not (nor can it have one as it isn't a templated function). - Clang rejects `#6` for the same reasons it rejects `#5`. This patch resolves these issues by making the following changes: - To fix `#4`, `Sema::AreConstraintExpressionsEqual` is passed `FunctionTemplateDecl`s when comparing the trailing _requires-clauses_ of `#4` and the function template instantiated from `#1`. - To fix `#5` and `#6`, the trailing _requires-clauses_ are not compared for explicit specializations that declare functions. In addition to these changes, `CheckMemberSpecialization` now considers constraint satisfaction/constraint partial ordering when determining which member function is specialized by an explicit specialization of a member function for an implicit instantiation of a class template (we previously would select the first function that has the same type as the explicit specialization). With constraints taken under consideration, we match EDG's behavior for these declarations.

...which caused issues like > ==42==ERROR: AddressSanitizer failed to deallocate 0x32 (50) bytes at address 0x117e0000 (error code: 28) > ==42==Cannot dump memory map on emscriptenAddressSanitizer: CHECK failed: sanitizer_common.cpp:81 "((0 && "unable to unmmap")) != (0)" (0x0, 0x0) (tid=288045824) > #0 0x14f73b0c in __asan::CheckUnwind()+0x14f73b0c (this.program+0x14f73b0c) > #1 0x14f8a3c2 in __sanitizer::CheckFailed(char const*, int, char const*, unsigned long long, unsigned long long)+0x14f8a3c2 (this.program+0x14f8a3c2) > #2 0x14f7d6e1 in __sanitizer::ReportMunmapFailureAndDie(void*, unsigned long, int, bool)+0x14f7d6e1 (this.program+0x14f7d6e1) > #3 0x14f81fbd in __sanitizer::UnmapOrDie(void*, unsigned long)+0x14f81fbd (this.program+0x14f81fbd) > #4 0x14f875df in __sanitizer::SuppressionContext::ParseFromFile(char const*)+0x14f875df (this.program+0x14f875df) > #5 0x14f74eab in __asan::InitializeSuppressions()+0x14f74eab (this.program+0x14f74eab) > #6 0x14f73a1a in __asan::AsanInitInternal()+0x14f73a1a (this.program+0x14f73a1a) when trying to use an ASan suppressions file under Emscripten: Even though it would be considered OK by SUSv4, the Emscripten runtime states "We don't support partial munmapping" (see <emscripten-core/emscripten@f4115eb> "Implement MAP_ANONYMOUS on top of malloc in STANDALONE_WASM mode (llvm#16289)"). Co-authored-by: Stephan Bergmann <stephan.bergmann@allotropia.de>

…ication as used during partial ordering (llvm#91534) We do not deduce template arguments from the exception specification when determining the primary template of a function template specialization or when taking the address of a function template. Therefore, this patch changes `isAtLeastAsSpecializedAs` such that we do not mark template parameters in the exception specification as 'used' during partial ordering (per [temp.deduct.partial] p12) to prevent the following from being ambiguous: ``` template<typename T, typename U> void f(U) noexcept(noexcept(T())); // #1 template<typename T> void f(T*) noexcept; // #2 template<> void f<int>(int*) noexcept; // currently ambiguous, selects #2 with this patch applied ``` Although there is no corresponding wording in the standard (see core issue filed here cplusplus/CWG#537), this seems to be the intended behavior given the definition of _deduction substitution loci_ in [temp.deduct.general] p7 (and EDG does the same thing).

…erSize (llvm#67657)" This reverts commit f0b3654. This commit triggers UB by reading an uninitialized variable. `UP.PartialThreshold` is used uninitialized in `getUnrollingPreferences()` when it is called from `LoopVectorizationPlanner::executePlan()`. In this case the `UP` variable is created on the stack and its fields are not initialized. ``` ==8802==WARNING: MemorySanitizer: use-of-uninitialized-value #0 0x557c0b081b99 in llvm::BasicTTIImplBase<llvm::X86TTIImpl>::getUnrollingPreferences(llvm::Loop*, llvm::ScalarEvolution&, llvm::TargetTransformInfo::UnrollingPreferences&, llvm::OptimizationRemarkEmitter*) llvm-project/llvm/include/llvm/CodeGen/BasicTTIImpl.h #1 0x557c0b07a40c in llvm::TargetTransformInfo::Model<llvm::X86TTIImpl>::getUnrollingPreferences(llvm::Loop*, llvm::ScalarEvolution&, llvm::TargetTransformInfo::UnrollingPreferences&, llvm::OptimizationRemarkEmitter*) llvm-project/llvm/include/llvm/Analysis/TargetTransformInfo.h:2277:17 #2 0x557c0f5d69ee in llvm::TargetTransformInfo::getUnrollingPreferences(llvm::Loop*, llvm::ScalarEvolution&, llvm::TargetTransformInfo::UnrollingPreferences&, llvm::OptimizationRemarkEmitter*) const llvm-project/llvm/lib/Analysis/TargetTransformInfo.cpp:387:19 #3 0x557c0e6b96a0 in llvm::LoopVectorizationPlanner::executePlan(llvm::ElementCount, unsigned int, llvm::VPlan&, llvm::InnerLoopVectorizer&, llvm::DominatorTree*, bool, llvm::DenseMap<llvm::SCEV const*, llvm::Value*, llvm::DenseMapInfo<llvm::SCEV const*, void>, llvm::detail::DenseMapPair<llvm::SCEV const*, llvm::Value*>> const*) llvm-project/llvm/lib/Transforms/Vectorize/LoopVectorize.cpp:7624:7 #4 0x557c0e6e4b63 in llvm::LoopVectorizePass::processLoop(llvm::Loop*) llvm-project/llvm/lib/Transforms/Vectorize/LoopVectorize.cpp:10253:13 #5 0x557c0e6f2429 in llvm::LoopVectorizePass::runImpl(llvm::Function&, llvm::ScalarEvolution&, llvm::LoopInfo&, llvm::TargetTransformInfo&, llvm::DominatorTree&, llvm::BlockFrequencyInfo*, llvm::TargetLibraryInfo*, llvm::DemandedBits&, llvm::AssumptionCache&, llvm::LoopAccessInfoManager&, llvm::OptimizationRemarkEmitter&, llvm::ProfileSummaryInfo*) llvm-project/llvm/lib/Transforms/Vectorize/LoopVectorize.cpp:10344:30 #6 0x557c0e6f2f97 in llvm::LoopVectorizePass::run(llvm::Function&, llvm::AnalysisManager<llvm::Function>&) llvm-project/llvm/lib/Transforms/Vectorize/LoopVectorize.cpp:10383:9 [...] Uninitialized value was created by an allocation of 'UP' in the stack frame #0 0x557c0e6b961e in llvm::LoopVectorizationPlanner::executePlan(llvm::ElementCount, unsigned int, llvm::VPlan&, llvm::InnerLoopVectorizer&, llvm::DominatorTree*, bool, llvm::DenseMap<llvm::SCEV const*, llvm::Value*, llvm::DenseMapInfo<llvm::SCEV const*, void>, llvm::detail::DenseMapPair<llvm::SCEV const*, llvm::Value*>> const*) llvm-project/llvm/lib/Transforms/Vectorize/LoopVectorize.cpp:7623:3 ```

…llvm#92855) This solves some ambuguity introduced in P0522 regarding how template template parameters are partially ordered, and should reduce the negative impact of enabling `-frelaxed-template-template-args` by default. When performing template argument deduction, we extend the provisional wording introduced in llvm#89807 so it also covers deduction of class templates. Given the following example: ```C++ template <class T1, class T2 = float> struct A; template <class T3> struct B; template <template <class T4> class TT1, class T5> struct B<TT1<T5>>; // #1 template <class T6, class T7> struct B<A<T6, T7>>; // #2 template struct B<A<int>>; ``` Prior to P0522, `#2` was picked. Afterwards, this became ambiguous. This patch restores the pre-P0522 behavior, `#2` is picked again. This has the beneficial side effect of making the following code valid: ```C++ template<class T, class U> struct A {}; A<int, float> v; template<template<class> class TT> void f(TT<int>); // OK: TT picks 'float' as the default argument for the second parameter. void g() { f(v); } ``` --- Since this changes provisional implementation of CWG2398 which has not been released yet, and already contains a changelog entry, we don't provide a changelog entry here.

On macOS, to make DYLD_INSERT_LIBRARIES and the Python shim work together, we have a workaroud that copies the "real" Python interpreter into the build directory. This doesn't work when running in a virtual environment, as the copied interpreter cannot find the packages installed in the virtual environment relative to itself. Address this issue by copying the Python interpreter into the virtual environment's `bin` folder, rather than the build folder, when the test suite detects that it's being run inside a virtual environment. I'm not thrilled about this solution because it puts a file outside the build directory. However, given virtual environments are considered disposable, this seems reasonable.

….5) The Python interpreter in Xcode cannot be copied because of a relative RPATH. Our workaround would just use that Python interpreter directly when it detects this. For the reasons explained in my previous commit, that doesn't work in a virtual environment. Address this case by creating a symlink to the "real" interpreter in the virtual environment.

…on (llvm#94752) Fixes llvm#62925. The following code: ```cpp #include <map> int main() { std::map m1 = {std::pair{"foo", 2}, {"bar", 3}}; // guide #2 std::map m2(m1.begin(), m1.end()); // guide #1 } ``` Is rejected by clang, but accepted by both gcc and msvc: https://godbolt.org/z/6v4fvabb5 . So basically CTAD with copy-list-initialization is rejected. Note that this exact code is also used in a cppreference article: https://en.cppreference.com/w/cpp/container/map/deduction_guides I checked the C++11 and C++20 standard drafts to see whether suppressing user conversion is the correct thing to do for user conversions. Based on the standard I don't think that it is correct. ``` 13.3.1.4 Copy-initialization of class by user-defined conversion [over.match.copy] Under the conditions specified in 8.5, as part of a copy-initialization of an object of class type, a user-defined conversion can be invoked to convert an initializer expression to the type of the object being initialized. Overload resolution is used to select the user-defined conversion to be invoked ``` So we could use user defined conversions according to the standard. ``` If a narrowing conversion is required to initialize any of the elements, the program is ill-formed. ``` We should not do narrowing. ``` In copy-list-initialization, if an explicit constructor is chosen, the initialization is ill-formed. ``` We should not use explicit constructors.

…arallel fusion llvm#94391 (llvm#97607)" This reverts commit edbc0e3. Reason for rollback. ASAN complains about this PR: ==4320==ERROR: AddressSanitizer: heap-use-after-free on address 0x502000006cd8 at pc 0x55e2978d63cf bp 0x7ffe6431c2b0 sp 0x7ffe6431c2a8 READ of size 8 at 0x502000006cd8 thread T0 #0 0x55e2978d63ce in map<llvm::MutableArrayRef<mlir::BlockArgument> &, llvm::MutableArrayRef<mlir::BlockArgument>, nullptr> mlir/include/mlir/IR/IRMapping.h:40:11 #1 0x55e2978d63ce in mlir::createFused(mlir::LoopLikeOpInterface, mlir::LoopLikeOpInterface, mlir::RewriterBase&, std::__u::function<llvm::SmallVector<mlir::Value, 6u> (mlir::OpBuilder&, mlir::Location, llvm::ArrayRef<mlir::BlockArgument>)>, llvm::function_ref<void (mlir::RewriterBase&, mlir::LoopLikeOpInterface, mlir::LoopLikeOpInterface&, mlir::IRMapping)>) mlir/lib/Interfaces/LoopLikeInterface.cpp:156:11 #2 0x55e2952a614b in mlir::fuseIndependentSiblingForLoops(mlir::scf::ForOp, mlir::scf::ForOp, mlir::RewriterBase&) mlir/lib/Dialect/SCF/Utils/Utils.cpp:1398:43 #3 0x55e291480c6f in mlir::transform::LoopFuseSiblingOp::apply(mlir::transform::TransformRewriter&, mlir::transform::TransformResults&, mlir::transform::TransformState&) mlir/lib/Dialect/SCF/TransformOps/SCFTransformOps.cpp:482:17 #4 0x55e29149ed5e in mlir::transform::detail::TransformOpInterfaceInterfaceTraits::Model<mlir::transform::LoopFuseSiblingOp>::apply(mlir::transform::detail::TransformOpInterfaceInterfaceTraits::Concept const*, mlir::Operation*, mlir::transform::TransformRewriter&, mlir::transform::TransformResults&, mlir::transform::TransformState&) blaze-out/k8-opt-asan/bin/mlir/include/mlir/Dialect/Transform/Interfaces/TransformInterfaces.h.inc:477:56 #5 0x55e297494a60 in apply blaze-out/k8-opt-asan/bin/mlir/include/mlir/Dialect/Transform/Interfaces/TransformInterfaces.cpp.inc:61:14 #6 0x55e297494a60 in mlir::transform::TransformState::applyTransform(mlir::transform::TransformOpInterface) mlir/lib/Dialect/Transform/Interfaces/TransformInterfaces.cpp:953:48 #7 0x55e294646a8d in applySequenceBlock(mlir::Block&, mlir::transform::FailurePropagationMode, mlir::transform::TransformState&, mlir::transform::TransformResults&) mlir/lib/Dialect/Transform/IR/TransformOps.cpp:1788:15 #8 0x55e29464f927 in mlir::transform::NamedSequenceOp::apply(mlir::transform::TransformRewriter&, mlir::transform::TransformResults&, mlir::transform::TransformState&) mlir/lib/Dialect/Transform/IR/TransformOps.cpp:2155:10 #9 0x55e2945d28ee in mlir::transform::detail::TransformOpInterfaceInterfaceTraits::Model<mlir::transform::NamedSequenceOp>::apply(mlir::transform::detail::TransformOpInterfaceInterfaceTraits::Concept const*, mlir::Operation*, mlir::transform::TransformRewriter&, mlir::transform::TransformResults&, mlir::transform::TransformState&) blaze-out/k8-opt-asan/bin/mlir/include/mlir/Dialect/Transform/Interfaces/TransformInterfaces.h.inc:477:56 #10 0x55e297494a60 in apply blaze-out/k8-opt-asan/bin/mlir/include/mlir/Dialect/Transform/Interfaces/TransformInterfaces.cpp.inc:61:14 #11 0x55e297494a60 in mlir::transform::TransformState::applyTransform(mlir::transform::TransformOpInterface) mlir/lib/Dialect/Transform/Interfaces/TransformInterfaces.cpp:953:48 #12 0x55e2974a5fe2 in mlir::transform::applyTransforms(mlir::Operation*, mlir::transform::TransformOpInterface, mlir::RaggedArray<llvm::PointerUnion<mlir::Operation*, mlir::Attribute, mlir::Value>> const&, mlir::transform::TransformOptions const&, bool) mlir/lib/Dialect/Transform/Interfaces/TransformInterfaces.cpp:2016:16 #13 0x55e2945888d7 in mlir::transform::applyTransformNamedSequence(mlir::RaggedArray<llvm::PointerUnion<mlir::Operation*, mlir::Attribute, mlir::Value>>, mlir::transform::TransformOpInterface, mlir::ModuleOp, mlir::transform::TransformOptions const&) mlir/lib/Dialect/Transform/Transforms/TransformInterpreterUtils.cpp:234:10 #14 0x55e294582446 in (anonymous namespace)::InterpreterPass::runOnOperation() mlir/lib/Dialect/Transform/Transforms/InterpreterPass.cpp:147:16 #15 0x55e2978e93c6 in operator() mlir/lib/Pass/Pass.cpp:527:17 #16 0x55e2978e93c6 in void llvm::function_ref<void ()>::callback_fn<mlir::detail::OpToOpPassAdaptor::run(mlir::Pass*, mlir::Operation*, mlir::AnalysisManager, bool, unsigned int)::$_1>(long) llvm/include/llvm/ADT/STLFunctionalExtras.h:45:12 #17 0x55e2978e207a in operator() llvm/include/llvm/ADT/STLFunctionalExtras.h:68:12 #18 0x55e2978e207a in executeAction<mlir::PassExecutionAction, mlir::Pass &> mlir/include/mlir/IR/MLIRContext.h:275:7 #19 0x55e2978e207a in mlir::detail::OpToOpPassAdaptor::run(mlir::Pass*, mlir::Operation*, mlir::AnalysisManager, bool, unsigned int) mlir/lib/Pass/Pass.cpp:521:21 #20 0x55e2978e5fbf in runPipeline mlir/lib/Pass/Pass.cpp:593:16 #21 0x55e2978e5fbf in mlir::PassManager::runPasses(mlir::Operation*, mlir::AnalysisManager) mlir/lib/Pass/Pass.cpp:904:10 #22 0x55e2978e5b65 in mlir::PassManager::run(mlir::Operation*) mlir/lib/Pass/Pass.cpp:884:60 #23 0x55e291ebb460 in performActions(llvm::raw_ostream&, std::__u::shared_ptr<llvm::SourceMgr> const&, mlir::MLIRContext*, mlir::MlirOptMainConfig const&) mlir/lib/Tools/mlir-opt/MlirOptMain.cpp:408:17 #24 0x55e291ebabd9 in processBuffer mlir/lib/Tools/mlir-opt/MlirOptMain.cpp:481:9 #25 0x55e291ebabd9 in operator() mlir/lib/Tools/mlir-opt/MlirOptMain.cpp:548:12 #26 0x55e291ebabd9 in llvm::LogicalResult llvm::function_ref<llvm::LogicalResult (std::__u::unique_ptr<llvm::MemoryBuffer, std::__u::default_delete<llvm::MemoryBuffer>>, llvm::raw_ostream&)>::callback_fn<mlir::MlirOptMain(llvm::raw_ostream&, std::__u::unique_ptr<llvm::MemoryBuffer, std::__u::default_delete<llvm::MemoryBuffer>>, mlir::DialectRegistry&, mlir::MlirOptMainConfig const&)::$_0>(long, std::__u::unique_ptr<llvm::MemoryBuffer, std::__u::default_delete<llvm::MemoryBuffer>>, llvm::raw_ostream&) llvm/include/llvm/ADT/STLFunctionalExtras.h:45:12 #27 0x55e297b1cffe in operator() llvm/include/llvm/ADT/STLFunctionalExtras.h:68:12 #28 0x55e297b1cffe in mlir::splitAndProcessBuffer(std::__u::unique_ptr<llvm::MemoryBuffer, std::__u::default_delete<llvm::MemoryBuffer>>, llvm::function_ref<llvm::LogicalResult (std::__u::unique_ptr<llvm::MemoryBuffer, std::__u::default_delete<llvm::MemoryBuffer>>, llvm::raw_ostream&)>, llvm::raw_ostream&, llvm::StringRef, llvm::StringRef)::$_0::operator()(llvm::StringRef) const mlir/lib/Support/ToolUtilities.cpp:86:16 #29 0x55e297b1c9c5 in interleave<const llvm::StringRef *, (lambda at mlir/lib/Support/ToolUtilities.cpp:79:23), (lambda at llvm/include/llvm/ADT/STLExtras.h:2147:49), void> llvm/include/llvm/ADT/STLExtras.h:2125:3 #30 0x55e297b1c9c5 in interleave<llvm::SmallVector<llvm::StringRef, 8U>, (lambda at mlir/lib/Support/ToolUtilities.cpp:79:23), llvm::raw_ostream, llvm::StringRef> llvm/include/llvm/ADT/STLExtras.h:2147:3 #31 0x55e297b1c9c5 in mlir::splitAndProcessBuffer(std::__u::unique_ptr<llvm::MemoryBuffer, std::__u::default_delete<llvm::MemoryBuffer>>, llvm::function_ref<llvm::LogicalResult (std::__u::unique_ptr<llvm::MemoryBuffer, std::__u::default_delete<llvm::MemoryBuffer>>, llvm::raw_ostream&)>, llvm::raw_ostream&, llvm::StringRef, llvm::StringRef) mlir/lib/Support/ToolUtilities.cpp:89:3 #32 0x55e291eb0cf0 in mlir::MlirOptMain(llvm::raw_ostream&, std::__u::unique_ptr<llvm::MemoryBuffer, std::__u::default_delete<llvm::MemoryBuffer>>, mlir::DialectRegistry&, mlir::MlirOptMainConfig const&) mlir/lib/Tools/mlir-opt/MlirOptMain.cpp:551:10 #33 0x55e291eb115c in mlir::MlirOptMain(int, char**, llvm::StringRef, llvm::StringRef, mlir::DialectRegistry&) mlir/lib/Tools/mlir-opt/MlirOptMain.cpp:589:14 #34 0x55e291eb15f8 in mlir::MlirOptMain(int, char**, llvm::StringRef, mlir::DialectRegistry&) mlir/lib/Tools/mlir-opt/MlirOptMain.cpp:605:10 #35 0x55e29130d1be in main mlir/tools/mlir-opt/mlir-opt.cpp:311:33 #36 0x7fbcf3fff3d3 in __libc_start_main (/usr/grte/v5/lib64/libc.so.6+0x613d3) (BuildId: 9a996398ce14a94560b0c642eb4f6e94) #37 0x55e2912365a9 in _start /usr/grte/v5/debug-src/src/csu/../sysdeps/x86_64/start.S:120 0x502000006cd8 is located 8 bytes inside of 16-byte region [0x502000006cd0,0x502000006ce0) freed by thread T0 here: #0 0x55e29130b7e2 in operator delete(void*, unsigned long) compiler-rt/lib/asan/asan_new_delete.cpp:155:3 #1 0x55e2979eb657 in __libcpp_operator_delete<void *, unsigned long> #2 0x55e2979eb657 in __do_deallocate_handle_size<> #3 0x55e2979eb657 in __libcpp_deallocate #4 0x55e2979eb657 in deallocate #5 0x55e2979eb657 in deallocate #6 0x55e2979eb657 in operator() #7 0x55e2979eb657 in ~vector #8 0x55e2979eb657 in mlir::Block::~Block() mlir/lib/IR/Block.cpp:24:1 #9 0x55e2979ebc17 in deleteNode llvm/include/llvm/ADT/ilist.h:42:39 #10 0x55e2979ebc17 in erase llvm/include/llvm/ADT/ilist.h:205:5 #11 0x55e2979ebc17 in erase llvm/include/llvm/ADT/ilist.h:209:39 #12 0x55e2979ebc17 in mlir::Block::erase() mlir/lib/IR/Block.cpp:67:28 #13 0x55e297aef978 in mlir::RewriterBase::eraseBlock(mlir::Block*) mlir/lib/IR/PatternMatch.cpp:245:10 #14 0x55e297af0563 in mlir::RewriterBase::inlineBlockBefore(mlir::Block*, mlir::Block*, llvm::ilist_iterator<llvm::ilist_detail::node_options<mlir::Operation, false, false, void, false, void>, false, false>, mlir::ValueRange) mlir/lib/IR/PatternMatch.cpp:331:3 #15 0x55e297af06d8 in mlir::RewriterBase::mergeBlocks(mlir::Block*, mlir::Block*, mlir::ValueRange) mlir/lib/IR/PatternMatch.cpp:341:3 #16 0x55e297036608 in mlir::scf::ForOp::replaceWithAdditionalYields(mlir::RewriterBase&, mlir::ValueRange, bool, std::__u::function<llvm::SmallVector<mlir::Value, 6u> (mlir::OpBuilder&, mlir::Location, llvm::ArrayRef<mlir::BlockArgument>)> const&) mlir/lib/Dialect/SCF/IR/SCF.cpp:575:12 #17 0x55e2970673ca in mlir::detail::LoopLikeOpInterfaceInterfaceTraits::Model<mlir::scf::ForOp>::replaceWithAdditionalYields(mlir::detail::LoopLikeOpInterfaceInterfaceTraits::Concept const*, mlir::Operation*, mlir::RewriterBase&, mlir::ValueRange, bool, std::__u::function<llvm::SmallVector<mlir::Value, 6u> (mlir::OpBuilder&, mlir::Location, llvm::ArrayRef<mlir::BlockArgument>)> const&) blaze-out/k8-opt-asan/bin/mlir/include/mlir/Interfaces/LoopLikeInterface.h.inc:658:56 #18 0x55e2978d5feb in replaceWithAdditionalYields blaze-out/k8-opt-asan/bin/mlir/include/mlir/Interfaces/LoopLikeInterface.cpp.inc:105:14 #19 0x55e2978d5feb in mlir::createFused(mlir::LoopLikeOpInterface, mlir::LoopLikeOpInterface, mlir::RewriterBase&, std::__u::function<llvm::SmallVector<mlir::Value, 6u> (mlir::OpBuilder&, mlir::Location, llvm::ArrayRef<mlir::BlockArgument>)>, llvm::function_ref<void (mlir::RewriterBase&, mlir::LoopLikeOpInterface, mlir::LoopLikeOpInterface&, mlir::IRMapping)>) mlir/lib/Interfaces/LoopLikeInterface.cpp:135:14 #20 0x55e2952a614b in mlir::fuseIndependentSiblingForLoops(mlir::scf::ForOp, mlir::scf::ForOp, mlir::RewriterBase&) mlir/lib/Dialect/SCF/Utils/Utils.cpp:1398:43 #21 0x55e291480c6f in mlir::transform::LoopFuseSiblingOp::apply(mlir::transform::TransformRewriter&, mlir::transform::TransformResults&, mlir::transform::TransformState&) mlir/lib/Dialect/SCF/TransformOps/SCFTransformOps.cpp:482:17 #22 0x55e29149ed5e in mlir::transform::detail::TransformOpInterfaceInterfaceTraits::Model<mlir::transform::LoopFuseSiblingOp>::apply(mlir::transform::detail::TransformOpInterfaceInterfaceTraits::Concept const*, mlir::Operation*, mlir::transform::TransformRewriter&, mlir::transform::TransformResults&, mlir::transform::TransformState&) blaze-out/k8-opt-asan/bin/mlir/include/mlir/Dialect/Transform/Interfaces/TransformInterfaces.h.inc:477:56 #23 0x55e297494a60 in apply blaze-out/k8-opt-asan/bin/mlir/include/mlir/Dialect/Transform/Interfaces/TransformInterfaces.cpp.inc:61:14 #24 0x55e297494a60 in mlir::transform::TransformState::applyTransform(mlir::transform::TransformOpInterface) mlir/lib/Dialect/Transform/Interfaces/TransformInterfaces.cpp:953:48 #25 0x55e294646a8d in applySequenceBlock(mlir::Block&, mlir::transform::FailurePropagationMode, mlir::transform::TransformState&, mlir::transform::TransformResults&) mlir/lib/Dialect/Transform/IR/TransformOps.cpp:1788:15 #26 0x55e29464f927 in mlir::transform::NamedSequenceOp::apply(mlir::transform::TransformRewriter&, mlir::transform::TransformResults&, mlir::transform::TransformState&) mlir/lib/Dialect/Transform/IR/TransformOps.cpp:2155:10 #27 0x55e2945d28ee in mlir::transform::detail::TransformOpInterfaceInterfaceTraits::Model<mlir::transform::NamedSequenceOp>::apply(mlir::transform::detail::TransformOpInterfaceInterfaceTraits::Concept const*, mlir::Operation*, mlir::transform::TransformRewriter&, mlir::transform::TransformResults&, mlir::transform::TransformState&) blaze-out/k8-opt-asan/bin/mlir/include/mlir/Dialect/Transform/Interfaces/TransformInterfaces.h.inc:477:56 #28 0x55e297494a60 in apply blaze-out/k8-opt-asan/bin/mlir/include/mlir/Dialect/Transform/Interfaces/TransformInterfaces.cpp.inc:61:14 #29 0x55e297494a60 in mlir::transform::TransformState::applyTransform(mlir::transform::TransformOpInterface) mlir/lib/Dialect/Transform/Interfaces/TransformInterfaces.cpp:953:48 #30 0x55e2974a5fe2 in mlir::transform::applyTransforms(mlir::Operation*, mlir::transform::TransformOpInterface, mlir::RaggedArray<llvm::PointerUnion<mlir::Operation*, mlir::Attribute, mlir::Value>> const&, mlir::transform::TransformOptions const&, bool) mlir/lib/Dialect/Transform/Interfaces/TransformInterfaces.cpp:2016:16 #31 0x55e2945888d7 in mlir::transform::applyTransformNamedSequence(mlir::RaggedArray<llvm::PointerUnion<mlir::Operation*, mlir::Attribute, mlir::Value>>, mlir::transform::TransformOpInterface, mlir::ModuleOp, mlir::transform::TransformOptions const&) mlir/lib/Dialect/Transform/Transforms/TransformInterpreterUtils.cpp:234:10 #32 0x55e294582446 in (anonymous namespace)::InterpreterPass::runOnOperation() mlir/lib/Dialect/Transform/Transforms/InterpreterPass.cpp:147:16 #33 0x55e2978e93c6 in operator() mlir/lib/Pass/Pass.cpp:527:17 #34 0x55e2978e93c6 in void llvm::function_ref<void ()>::callback_fn<mlir::detail::OpToOpPassAdaptor::run(mlir::Pass*, mlir::Operation*, mlir::AnalysisManager, bool, unsigned int)::$_1>(long) llvm/include/llvm/ADT/STLFunctionalExtras.h:45:12 #35 0x55e2978e207a in operator() llvm/include/llvm/ADT/STLFunctionalExtras.h:68:12 #36 0x55e2978e207a in executeAction<mlir::PassExecutionAction, mlir::Pass &> mlir/include/mlir/IR/MLIRContext.h:275:7 #37 0x55e2978e207a in mlir::detail::OpToOpPassAdaptor::run(mlir::Pass*, mlir::Operation*, mlir::AnalysisManager, bool, unsigned int) mlir/lib/Pass/Pass.cpp:521:21 #38 0x55e2978e5fbf in runPipeline mlir/lib/Pass/Pass.cpp:593:16 #39 0x55e2978e5fbf in mlir::PassManager::runPasses(mlir::Operation*, mlir::AnalysisManager) mlir/lib/Pass/Pass.cpp:904:10 #40 0x55e2978e5b65 in mlir::PassManager::run(mlir::Operation*) mlir/lib/Pass/Pass.cpp:884:60 #41 0x55e291ebb460 in performActions(llvm::raw_ostream&, std::__u::shared_ptr<llvm::SourceMgr> const&, mlir::MLIRContext*, mlir::MlirOptMainConfig const&) mlir/lib/Tools/mlir-opt/MlirOptMain.cpp:408:17 #42 0x55e291ebabd9 in processBuffer mlir/lib/Tools/mlir-opt/MlirOptMain.cpp:481:9 #43 0x55e291ebabd9 in operator() mlir/lib/Tools/mlir-opt/MlirOptMain.cpp:548:12 #44 0x55e291ebabd9 in llvm::LogicalResult llvm::function_ref<llvm::LogicalResult (std::__u::unique_ptr<llvm::MemoryBuffer, std::__u::default_delete<llvm::MemoryBuffer>>, llvm::raw_ostream&)>::callback_fn<mlir::MlirOptMain(llvm::raw_ostream&, std::__u::unique_ptr<llvm::MemoryBuffer, std::__u::default_delete<llvm::MemoryBuffer>>, mlir::DialectRegistry&, mlir::MlirOptMainConfig const&)::$_0>(long, std::__u::unique_ptr<llvm::MemoryBuffer, std::__u::default_delete<llvm::MemoryBuffer>>, llvm::raw_ostream&) llvm/include/llvm/ADT/STLFunctionalExtras.h:45:12 #45 0x55e297b1cffe in operator() llvm/include/llvm/ADT/STLFunctionalExtras.h:68:12 llvm#46 0x55e297b1cffe in mlir::splitAndProcessBuffer(std::__u::unique_ptr<llvm::MemoryBuffer, std::__u::default_delete<llvm::MemoryBuffer>>, llvm::function_ref<llvm::LogicalResult (std::__u::unique_ptr<llvm::MemoryBuffer, std::__u::default_delete<llvm::MemoryBuffer>>, llvm::raw_ostream&)>, llvm::raw_ostream&, llvm::StringRef, llvm::StringRef)::$_0::operator()(llvm::StringRef) const mlir/lib/Support/ToolUtilities.cpp:86:16 llvm#47 0x55e297b1c9c5 in interleave<const llvm::StringRef *, (lambda at mlir/lib/Support/ToolUtilities.cpp:79:23), (lambda at llvm/include/llvm/ADT/STLExtras.h:2147:49), void> llvm/include/llvm/ADT/STLExtras.h:2125:3 llvm#48 0x55e297b1c9c5 in interleave<llvm::SmallVector<llvm::StringRef, 8U>, (lambda at mlir/lib/Support/ToolUtilities.cpp:79:23), llvm::raw_ostream, llvm::StringRef> llvm/include/llvm/ADT/STLExtras.h:2147:3 llvm#49 0x55e297b1c9c5 in mlir::splitAndProcessBuffer(std::__u::unique_ptr<llvm::MemoryBuffer, std::__u::default_delete<llvm::MemoryBuffer>>, llvm::function_ref<llvm::LogicalResult (std::__u::unique_ptr<llvm::MemoryBuffer, std::__u::default_delete<llvm::MemoryBuffer>>, llvm::raw_ostream&)>, llvm::raw_ostream&, llvm::StringRef, llvm::StringRef) mlir/lib/Support/ToolUtilities.cpp:89:3 llvm#50 0x55e291eb0cf0 in mlir::MlirOptMain(llvm::raw_ostream&, std::__u::unique_ptr<llvm::MemoryBuffer, std::__u::default_delete<llvm::MemoryBuffer>>, mlir::DialectRegistry&, mlir::MlirOptMainConfig const&) mlir/lib/Tools/mlir-opt/MlirOptMain.cpp:551:10 llvm#51 0x55e291eb115c in mlir::MlirOptMain(int, char**, llvm::StringRef, llvm::StringRef, mlir::DialectRegistry&) mlir/lib/Tools/mlir-opt/MlirOptMain.cpp:589:14 previously allocated by thread T0 here: #0 0x55e29130ab5d in operator new(unsigned long) compiler-rt/lib/asan/asan_new_delete.cpp:86:3 #1 0x55e2979ed5d4 in __libcpp_operator_new<unsigned long> #2 0x55e2979ed5d4 in __libcpp_allocate #3 0x55e2979ed5d4 in allocate #4 0x55e2979ed5d4 in __allocate_at_least<std::__u::allocator<mlir::BlockArgument> > #5 0x55e2979ed5d4 in __split_buffer #6 0x55e2979ed5d4 in mlir::BlockArgument* std::__u::vector<mlir::BlockArgument, std::__u::allocator<mlir::BlockArgument>>::__push_back_slow_path<mlir::BlockArgument const&>(mlir::BlockArgument const&) #7 0x55e2979ec0f2 in push_back #8 0x55e2979ec0f2 in mlir::Block::addArgument(mlir::Type, mlir::Location) mlir/lib/IR/Block.cpp:154:13 #9 0x55e29796e457 in parseRegionBody mlir/lib/AsmParser/Parser.cpp:2172:34 #10 0x55e29796e457 in (anonymous namespace)::OperationParser::parseRegion(mlir::Region&, llvm::ArrayRef<mlir::OpAsmParser::Argument>, bool) mlir/lib/AsmParser/Parser.cpp:2121:7 #11 0x55e29796b25e in (anonymous namespace)::CustomOpAsmParser::parseRegion(mlir::Region&, llvm::ArrayRef<mlir::OpAsmParser::Argument>, bool) mlir/lib/AsmParser/Parser.cpp:1785:16 #12 0x55e297035742 in mlir::scf::ForOp::parse(mlir::OpAsmParser&, mlir::OperationState&) mlir/lib/Dialect/SCF/IR/SCF.cpp:521:14 #13 0x55e291322c18 in llvm::ParseResult llvm::detail::UniqueFunctionBase<llvm::ParseResult, mlir::OpAsmParser&, mlir::OperationState&>::CallImpl<llvm::ParseResult (*)(mlir::OpAsmParser&, mlir::OperationState&)>(void*, mlir::OpAsmParser&, mlir::OperationState&) llvm/include/llvm/ADT/FunctionExtras.h:220:12 #14 0x55e29795bea3 in operator() llvm/include/llvm/ADT/FunctionExtras.h:384:12 #15 0x55e29795bea3 in callback_fn<llvm::unique_function<llvm::ParseResult (mlir::OpAsmParser &, mlir::OperationState &)> > llvm/include/llvm/ADT/STLFunctionalExtras.h:45:12 #16 0x55e29795bea3 in operator() llvm/include/llvm/ADT/STLFunctionalExtras.h:68:12 #17 0x55e29795bea3 in parseOperation mlir/lib/AsmParser/Parser.cpp:1521:9 #18 0x55e29795bea3 in parseCustomOperation mlir/lib/AsmParser/Parser.cpp:2017:19 #19 0x55e29795bea3 in (anonymous namespace)::OperationParser::parseOperation() mlir/lib/AsmParser/Parser.cpp:1174:10 #20 0x55e297971d20 in parseBlockBody mlir/lib/AsmParser/Parser.cpp:2296:9 #21 0x55e297971d20 in (anonymous namespace)::OperationParser::parseBlock(mlir::Block*&) mlir/lib/AsmParser/Parser.cpp:2226:12 #22 0x55e29796e4f5 in parseRegionBody mlir/lib/AsmParser/Parser.cpp:2184:7 #23 0x55e29796e4f5 in (anonymous namespace)::OperationParser::parseRegion(mlir::Region&, llvm::ArrayRef<mlir::OpAsmParser::Argument>, bool) mlir/lib/AsmParser/Parser.cpp:2121:7 #24 0x55e29796b25e in (anonymous namespace)::CustomOpAsmParser::parseRegion(mlir::Region&, llvm::ArrayRef<mlir::OpAsmParser::Argument>, bool) mlir/lib/AsmParser/Parser.cpp:1785:16 #25 0x55e29796b2cf in (anonymous namespace)::CustomOpAsmParser::parseOptionalRegion(mlir::Region&, llvm::ArrayRef<mlir::OpAsmParser::Argument>, bool) mlir/lib/AsmParser/Parser.cpp:1796:12 #26 0x55e2978d89ff in mlir::function_interface_impl::parseFunctionOp(mlir::OpAsmParser&, mlir::OperationState&, bool, mlir::StringAttr, llvm::function_ref<mlir::Type (mlir::Builder&, llvm::ArrayRef<mlir::Type>, llvm::ArrayRef<mlir::Type>, mlir::function_interface_impl::VariadicFlag, std::__u::basic_string<char, std::__u::char_traits<char>, std::__u::allocator<char>>&)>, mlir::StringAttr, mlir::StringAttr) mlir/lib/Interfaces/FunctionImplementation.cpp:232:14 #27 0x55e2969ba41d in mlir::func::FuncOp::parse(mlir::OpAsmParser&, mlir::OperationState&) mlir/lib/Dialect/Func/IR/FuncOps.cpp:203:10 #28 0x55e291322c18 in llvm::ParseResult llvm::detail::UniqueFunctionBase<llvm::ParseResult, mlir::OpAsmParser&, mlir::OperationState&>::CallImpl<llvm::ParseResult (*)(mlir::OpAsmParser&, mlir::OperationState&)>(void*, mlir::OpAsmParser&, mlir::OperationState&) llvm/include/llvm/ADT/FunctionExtras.h:220:12 #29 0x55e29795bea3 in operator() llvm/include/llvm/ADT/FunctionExtras.h:384:12 #30 0x55e29795bea3 in callback_fn<llvm::unique_function<llvm::ParseResult (mlir::OpAsmParser &, mlir::OperationState &)> > llvm/include/llvm/ADT/STLFunctionalExtras.h:45:12 #31 0x55e29795bea3 in operator() llvm/include/llvm/ADT/STLFunctionalExtras.h:68:12 #32 0x55e29795bea3 in parseOperation mlir/lib/AsmParser/Parser.cpp:1521:9 #33 0x55e29795bea3 in parseCustomOperation mlir/lib/AsmParser/Parser.cpp:2017:19 #34 0x55e29795bea3 in (anonymous namespace)::OperationParser::parseOperation() mlir/lib/AsmParser/Parser.cpp:1174:10 #35 0x55e297959b78 in parse mlir/lib/AsmParser/Parser.cpp:2725:20 #36 0x55e297959b78 in mlir::parseAsmSourceFile(llvm::SourceMgr const&, mlir::Block*, mlir::ParserConfig const&, mlir::AsmParserState*, mlir::AsmParserCodeCompleteContext*) mlir/lib/AsmParser/Parser.cpp:2785:41 #37 0x55e29790d5c2 in mlir::parseSourceFile(std::__u::shared_ptr<llvm::SourceMgr> const&, mlir::Block*, mlir::ParserConfig const&, mlir::LocationAttr*) mlir/lib/Parser/Parser.cpp:46:10 #38 0x55e291ebbfe2 in parseSourceFile<mlir::ModuleOp, const std::__u::shared_ptr<llvm::SourceMgr> &> mlir/include/mlir/Parser/Parser.h:159:14 #39 0x55e291ebbfe2 in parseSourceFile<mlir::ModuleOp> mlir/include/mlir/Parser/Parser.h:189:10 #40 0x55e291ebbfe2 in mlir::parseSourceFileForTool(std::__u::shared_ptr<llvm::SourceMgr> const&, mlir::ParserConfig const&, bool) mlir/include/mlir/Tools/ParseUtilities.h:31:12 #41 0x55e291ebb263 in performActions(llvm::raw_ostream&, std::__u::shared_ptr<llvm::SourceMgr> const&, mlir::MLIRContext*, mlir::MlirOptMainConfig const&) mlir/lib/Tools/mlir-opt/MlirOptMain.cpp:383:33 #42 0x55e291ebabd9 in processBuffer mlir/lib/Tools/mlir-opt/MlirOptMain.cpp:481:9 #43 0x55e291ebabd9 in operator() mlir/lib/Tools/mlir-opt/MlirOptMain.cpp:548:12 #44 0x55e291ebabd9 in llvm::LogicalResult llvm::function_ref<llvm::LogicalResult (std::__u::unique_ptr<llvm::MemoryBuffer, std::__u::default_delete<llvm::MemoryBuffer>>, llvm::raw_ostream&)>::callback_fn<mlir::MlirOptMain(llvm::raw_ostream&, std::__u::unique_ptr<llvm::MemoryBuffer, std::__u::default_delete<llvm::MemoryBuffer>>, mlir::DialectRegistry&, mlir::MlirOptMainConfig const&)::$_0>(long, std::__u::unique_ptr<llvm::MemoryBuffer, std::__u::default_delete<llvm::MemoryBuffer>>, llvm::raw_ostream&) llvm/include/llvm/ADT/STLFunctionalExtras.h:45:12 #45 0x55e297b1cffe in operator() llvm/include/llvm/ADT/STLFunctionalExtras.h:68:12 llvm#46 0x55e297b1cffe in mlir::splitAndProcessBuffer(std::__u::unique_ptr<llvm::MemoryBuffer, std::__u::default_delete<llvm::MemoryBuffer>>, llvm::function_ref<llvm::LogicalResult (std::__u::unique_ptr<llvm::MemoryBuffer, std::__u::default_delete<llvm::MemoryBuffer>>, llvm::raw_ostream&)>, llvm::raw_ostream&, llvm::StringRef, llvm::StringRef)::$_0::operator()(llvm::StringRef) const mlir/lib/Support/ToolUtilities.cpp:86:16 llvm#47 0x55e297b1c9c5 in interleave<const llvm::StringRef *, (lambda at mlir/lib/Support/ToolUtilities.cpp:79:23), (lambda at llvm/include/llvm/ADT/STLExtras.h:2147:49), void> llvm/include/llvm/ADT/STLExtras.h:2125:3 llvm#48 0x55e297b1c9c5 in interleave<llvm::SmallVector<llvm::StringRef, 8U>, (lambda at mlir/lib/Support/ToolUtilities.cpp:79:23), llvm::raw_ostream, llvm::StringRef> llvm/include/llvm/ADT/STLExtras.h:2147:3 llvm#49 0x55e297b1c9c5 in mlir::splitAndProcessBuffer(std::__u::unique_ptr<llvm::MemoryBuffer, std::__u::default_delete<llvm::MemoryBuffer>>, llvm::function_ref<llvm::LogicalResult (std::__u::unique_ptr<llvm::MemoryBuffer, std::__u::default_delete<llvm::MemoryBuffer>>, llvm::raw_ostream&)>, llvm::raw_ostream&, llvm::StringRef, llvm::StringRef) mlir/lib/Support/ToolUtilities.cpp:89:3 llvm#50 0x55e291eb0cf0 in mlir::MlirOptMain(llvm::raw_ostream&, std::__u::unique_ptr<llvm::MemoryBuffer, std::__u::default_delete<llvm::MemoryBuffer>>, mlir::DialectRegistry&, mlir::MlirOptMainConfig const&) mlir/lib/Tools/mlir-opt/MlirOptMain.cpp:551:10 llvm#51 0x55e291eb115c in mlir::MlirOptMain(int, char**, llvm::StringRef, llvm::StringRef, mlir::DialectRegistry&) mlir/lib/Tools/mlir-opt/MlirOptMain.cpp:589:14 llvm#52 0x55e291eb15f8 in mlir::MlirOptMain(int, char**, llvm::StringRef, mlir::DialectRegistry&) mlir/lib/Tools/mlir-opt/MlirOptMain.cpp:605:10 llvm#53 0x55e29130d1be in main mlir/tools/mlir-opt/mlir-opt.cpp:311:33 llvm#54 0x7fbcf3fff3d3 in __libc_start_main (/usr/grte/v5/lib64/libc.so.6+0x613d3) (BuildId: 9a996398ce14a94560b0c642eb4f6e94) llvm#55 0x55e2912365a9 in _start /usr/grte/v5/debug-src/src/csu/../sysdeps/x86_64/start.S:120 SUMMARY: AddressSanitizer: heap-use-after-free mlir/include/mlir/IR/IRMapping.h:40:11 in map<llvm::MutableArrayRef<mlir::BlockArgument> &, llvm::MutableArrayRef<mlir::BlockArgument>, nullptr> Shadow bytes around the buggy address: 0x502000006a00: fa fa 00 fa fa fa 00 00 fa fa 00 fa fa fa 00 fa 0x502000006a80: fa fa 00 fa fa fa 00 00 fa fa 00 00 fa fa 00 00 0x502000006b00: fa fa 00 00 fa fa 00 00 fa fa 00 fa fa fa 00 fa 0x502000006b80: fa fa 00 fa fa fa 00 fa fa fa 00 00 fa fa 00 00 0x502000006c00: fa fa 00 00 fa fa 00 00 fa fa 00 00 fa fa fd fa =>0x502000006c80: fa fa fd fa fa fa fd fd fa fa fd[fd]fa fa fd fd 0x502000006d00: fa fa 00 fa fa fa 00 fa fa fa 00 fa fa fa 00 fa 0x502000006d80: fa fa 00 fa fa fa 00 fa fa fa 00 fa fa fa 00 fa 0x502000006e00: fa fa 00 fa fa fa 00 fa fa fa 00 00 fa fa 00 fa 0x502000006e80: fa fa 00 fa fa fa 00 00 fa fa 00 fa fa fa 00 fa 0x502000006f00: fa fa 00 fa fa fa 00 fa fa fa 00 fa fa fa 00 fa Shadow byte legend (one shadow byte represents 8 application bytes): Addressable: 00 Partially addressable: 01 02 03 04 05 06 07 Heap left redzone: fa Freed heap region: fd Stack left redzone: f1 Stack mid redzone: f2 Stack right redzone: f3 Stack after return: f5 Stack use after scope: f8 Global redzone: f9 Global init order: f6 Poisoned by user: f7 Container overflow: fc Array cookie: ac Intra object redzone: bb ASan internal: fe Left alloca redzone: ca Right alloca redzone: cb ==4320==ABORTING

This test is currently flaky on a local Windows amd64 build. The reason is that it relies on the order of `process.threads` but this order is nondeterministic: If we print lldb's inputs and outputs while running, we can see that the breakpoints are always being set correctly, and always being hit: ```sh runCmd: breakpoint set -f "main.c" -l 2 output: Breakpoint 1: where = a.out`func_inner + 1 at main.c:2:9, address = 0x0000000140001001 runCmd: breakpoint set -f "main.c" -l 7 output: Breakpoint 2: where = a.out`main + 17 at main.c:7:5, address = 0x0000000140001021 runCmd: run output: Process 52328 launched: 'C:\workspace\llvm-project\llvm\build\lldb-test-build.noindex\functionalities\unwind\zeroth_frame\TestZerothFrame.test_dwarf\a.out' (x86_64) Process 52328 stopped * thread #1, stop reason = breakpoint 1.1 frame #0: 0x00007ff68f6b1001 a.out`func_inner at main.c:2:9 1 void func_inner() { -> 2 int a = 1; // Set breakpoint 1 here ^ 3 } 4 5 int main() { 6 func_inner(); 7 return 0; // Set breakpoint 2 here ``` However, sometimes the backtrace printed in this test shows that the process is stopped inside NtWaitForWorkViaWorkerFactory from `ntdll.dll`: ```sh Backtrace at the first breakpoint: frame #0: 0x00007ffecc7b3bf4 ntdll.dll`NtWaitForWorkViaWorkerFactory + 20 frame #1: 0x00007ffecc74585e ntdll.dll`RtlClearThreadWorkOnBehalfTicket + 862 frame #2: 0x00007ffecc3e257d kernel32.dll`BaseThreadInitThunk + 29 frame #3: 0x00007ffecc76af28 ntdll.dll`RtlUserThreadStart + 40 ``` When this happens, the test fails with an assertion error that the stopped thread's zeroth frame's current line number does not match the expected line number. This is because the test is looking at the wrong thread: `process.threads[0]`. If we print the list of threads each time the test is run, we notice that threads are sometimes in a different order, within `process.threads`: ```sh Thread 0: thread #4: tid = 0x9c38, 0x00007ffecc7b3bf4 ntdll.dll`NtWaitForWorkViaWorkerFactory + 20 Thread 1: thread #2: tid = 0xa950, 0x00007ffecc7b3bf4 ntdll.dll`NtWaitForWorkViaWorkerFactory + 20 Thread 2: thread #1: tid = 0xab18, 0x00007ff64bc81001 a.out`func_inner at main.c:2:9, stop reason = breakpoint 1.1 Thread 3: thread #3: tid = 0xc514, 0x00007ffecc7b3bf4 ntdll.dll`NtWaitForWorkViaWorkerFactory + 20 Thread 0: thread #3: tid = 0x018c, 0x00007ffecc7b3bf4 ntdll.dll`NtWaitForWorkViaWorkerFactory + 20 Thread 1: thread #1: tid = 0x85c8, 0x00007ff7130c1001 a.out`func_inner at main.c:2:9, stop reason = breakpoint 1.1 Thread 2: thread #2: tid = 0xf344, 0x00007ffecc7b3bf4 ntdll.dll`NtWaitForWorkViaWorkerFactory + 20 Thread 3: thread #4: tid = 0x6a50, 0x00007ffecc7b3bf4 ntdll.dll`NtWaitForWorkViaWorkerFactory + 20 ``` Use `self.thread()` to consistently select the correct thread, instead. Co-authored-by: kendal <kendal@thebrowser.company>

…izations of function templates to USRGenerator (llvm#98027) Given the following: ``` template<typename T> struct A { void f(int); // #1 template<typename U> void f(U); // #2 template<> void f<int>(int); // #3 }; ``` Clang will generate the same USR for `#1` and `#2`. This patch fixes the issue by including the template arguments of dependent class scope explicit specializations in their USRs.

This patch adds a frame recognizer for Clang's `__builtin_verbose_trap`, which behaves like a `__builtin_trap`, but emits a failure-reason string into debug-info in order for debuggers to display it to a user. The frame recognizer triggers when we encounter a frame with a function name that begins with `__clang_trap_msg`, which is the magic prefix Clang emits into debug-info for verbose traps. Once such frame is encountered we display the frame function name as the `Stop Reason` and display that frame to the user. Example output: ``` (lldb) run warning: a.out was compiled with optimization - stepping may behave oddly; variables may not be available. Process 35942 launched: 'a.out' (arm64) Process 35942 stopped * thread #1, queue = 'com.apple.main-thread', stop reason = Misc.: Function is not implemented frame #1: 0x0000000100003fa4 a.out`main [inlined] Dummy::func(this=<unavailable>) at verbose_trap.cpp:3:5 [opt] 1 struct Dummy { 2 void func() { -> 3 __builtin_verbose_trap("Misc.", "Function is not implemented"); 4 } 5 }; 6 7 int main() { (lldb) bt * thread #1, queue = 'com.apple.main-thread', stop reason = Misc.: Function is not implemented frame #0: 0x0000000100003fa4 a.out`main [inlined] __clang_trap_msg$Misc.$Function is not implemented$ at verbose_trap.cpp:0 [opt] * frame #1: 0x0000000100003fa4 a.out`main [inlined] Dummy::func(this=<unavailable>) at verbose_trap.cpp:3:5 [opt] frame #2: 0x0000000100003fa4 a.out`main at verbose_trap.cpp:8:13 [opt] frame #3: 0x0000000189d518b4 dyld`start + 1988 ```

…linux (llvm#99613) Examples of the output: ARM: ``` # ./a.out AddressSanitizer:DEADLYSIGNAL ================================================================= ==122==ERROR: AddressSanitizer: SEGV on unknown address 0x0000007a (pc 0x76e13ac0 bp 0x7eb7fd00 sp 0x7eb7fcc8 T0) ==122==The signal is caused by a READ memory access. ==122==Hint: address points to the zero page. #0 0x76e13ac0 (/lib/libc.so.6+0x7cac0) #1 0x76dce680 in gsignal (/lib/libc.so.6+0x37680) #2 0x005c2250 (/root/a.out+0x145250) #3 0x76db982c (/lib/libc.so.6+0x2282c) #4 0x76db9918 in __libc_start_main (/lib/libc.so.6+0x22918) ==122==Register values: r0 = 0x00000000 r1 = 0x0000007a r2 = 0x0000000b r3 = 0x76d95020 r4 = 0x0000007a r5 = 0x00000001 r6 = 0x005dcc5c r7 = 0x0000010c r8 = 0x0000000b r9 = 0x76f9ece0 r10 = 0x00000000 r11 = 0x7eb7fd00 r12 = 0x76dce670 sp = 0x7eb7fcc8 lr = 0x76e13ab4 pc = 0x76e13ac0 AddressSanitizer can not provide additional info. SUMMARY: AddressSanitizer: SEGV (/lib/libc.so.6+0x7cac0) ==122==ABORTING ``` AArch64: ``` # ./a.out UndefinedBehaviorSanitizer:DEADLYSIGNAL ==99==ERROR: UndefinedBehaviorSanitizer: SEGV on unknown address 0x000000000063 (pc 0x007fbbbc5860 bp 0x007fcfdcb700 sp 0x007fcfdcb700 T99) ==99==The signal is caused by a UNKNOWN memory access. ==99==Hint: address points to the zero page. #0 0x007fbbbc5860 (/lib64/libc.so.6+0x82860) #1 0x007fbbb81578 (/lib64/libc.so.6+0x3e578) #2 0x00556051152c (/root/a.out+0x3152c) #3 0x007fbbb6e268 (/lib64/libc.so.6+0x2b268) #4 0x007fbbb6e344 (/lib64/libc.so.6+0x2b344) #5 0x0055604e45ec (/root/a.out+0x45ec) ==99==Register values: x0 = 0x0000000000000000 x1 = 0x0000000000000063 x2 = 0x000000000000000b x3 = 0x0000007fbbb41440 x4 = 0x0000007fbbb41580 x5 = 0x3669288942d44cce x6 = 0x0000000000000000 x7 = 0x00000055605110b0 x8 = 0x0000000000000083 x9 = 0x0000000000000000 x10 = 0x0000000000000000 x11 = 0x0000000000000000 x12 = 0x0000007fbbdb3360 x13 = 0x0000000000010000 x14 = 0x0000000000000039 x15 = 0x00000000004113a0 x16 = 0x0000007fbbb81560 x17 = 0x0000005560540138 x18 = 0x000000006474e552 x19 = 0x0000000000000063 x20 = 0x0000000000000001 x21 = 0x000000000000000b x22 = 0x0000005560511510 x23 = 0x0000007fcfdcb918 x24 = 0x0000007fbbdb1b50 x25 = 0x0000000000000000 x26 = 0x0000007fbbdb2000 x27 = 0x000000556053f858 x28 = 0x0000000000000000 fp = 0x0000007fcfdcb700 lr = 0x0000007fbbbc584c sp = 0x0000007fcfdcb700 UndefinedBehaviorSanitizer can not provide additional info. SUMMARY: UndefinedBehaviorSanitizer: SEGV (/lib64/libc.so.6+0x82860) ==99==ABORTING ```

``` UBSan-Standalone-sparc :: TestCases/Misc/Linux/diag-stacktrace.cpp ``` `FAIL`s on 32 and 64-bit Linux/sparc64 (and on Solaris/sparcv9, too: the test isn't Linux-specific at all). With `UBSAN_OPTIONS=fast_unwind_on_fatal=1`, the stack trace shows a duplicate innermost frame: ``` compiler-rt/test/ubsan/TestCases/Misc/Linux/diag-stacktrace.cpp:14:31: runtime error: execution reached the end of a value-returning function without returning a value #0 0x7003a708 in f() compiler-rt/test/ubsan/TestCases/Misc/Linux/diag-stacktrace.cpp:14:35 #1 0x7003a708 in f() compiler-rt/test/ubsan/TestCases/Misc/Linux/diag-stacktrace.cpp:14:35 #2 0x7003a714 in g() compiler-rt/test/ubsan/TestCases/Misc/Linux/diag-stacktrace.cpp:17:38 ``` which isn't seen with `fast_unwind_on_fatal=0`. This turns out to be another fallout from fixing `__builtin_return_address`/`__builtin_extract_return_addr` on SPARC. In `sanitizer_stacktrace_sparc.cpp` (`BufferedStackTrace::UnwindFast`) the `pc` arg is the return address, while `pc1` from the stack frame (`fr_savpc`) is the address of the `call` insn, leading to a double entry for the innermost frame in `trace_buffer[]`. This patch fixes this by moving the adjustment before all uses. Tested on `sparc64-unknown-linux-gnu` and `sparcv9-sun-solaris2.11` (with the `ubsan/TestCases/Misc/Linux` tests enabled).

…lvm#104148) `hasOperands` does not always execute matchers in the order they are written. This can cause issue in code using bindings when one operand matcher is relying on a binding set by the other. With this change, the first matcher present in the code is always executed first and any binding it sets are available to the second matcher. Simple example with current version (1 match) and new version (2 matches): ```bash > cat tmp.cpp int a = 13; int b = ((int) a) - a; int c = a - ((int) a); > clang-query tmp.cpp clang-query> set traversal IgnoreUnlessSpelledInSource clang-query> m binaryOperator(hasOperands(cStyleCastExpr(has(declRefExpr(hasDeclaration(valueDecl().bind("d"))))), declRefExpr(hasDeclaration(valueDecl(equalsBoundNode("d")))))) Match #1: tmp.cpp:1:1: note: "d" binds here int a = 13; ^~~~~~~~~~ tmp.cpp:2:9: note: "root" binds here int b = ((int)a) - a; ^~~~~~~~~~~~ 1 match. > ./build/bin/clang-query tmp.cpp clang-query> set traversal IgnoreUnlessSpelledInSource clang-query> m binaryOperator(hasOperands(cStyleCastExpr(has(declRefExpr(hasDeclaration(valueDecl().bind("d"))))), declRefExpr(hasDeclaration(valueDecl(equalsBoundNode("d")))))) Match #1: tmp.cpp:1:1: note: "d" binds here 1 | int a = 13; | ^~~~~~~~~~ tmp.cpp:2:9: note: "root" binds here 2 | int b = ((int)a) - a; | ^~~~~~~~~~~~ Match #2: tmp.cpp:1:1: note: "d" binds here 1 | int a = 13; | ^~~~~~~~~~ tmp.cpp:3:9: note: "root" binds here 3 | int c = a - ((int)a); | ^~~~~~~~~~~~ 2 matches. ``` If this should be documented or regression tested anywhere please let me know where.

…104523) Compilers and language runtimes often use helper functions that are fundamentally uninteresting when debugging anything but the compiler/runtime itself. This patch introduces a user-extensible mechanism that allows for these frames to be hidden from backtraces and automatically skipped over when navigating the stack with `up` and `down`. This does not affect the numbering of frames, so `f <N>` will still provide access to the hidden frames. The `bt` output will also print a hint that frames have been hidden. My primary motivation for this feature is to hide thunks in the Swift programming language, but I'm including an example recognizer for `std::function::operator()` that I wished for myself many times while debugging LLDB. rdar://126629381 Example output. (Yes, my proof-of-concept recognizer could hide even more frames if we had a method that returned the function name without the return type or I used something that isn't based off regex, but it's really only meant as an example). before: ``` (lldb) thread backtrace --filtered=false * thread #1, queue = 'com.apple.main-thread', stop reason = breakpoint 1.1 * frame #0: 0x0000000100001f04 a.out`foo(x=1, y=1) at main.cpp:4:10 frame #1: 0x0000000100003a00 a.out`decltype(std::declval<int (*&)(int, int)>()(std::declval<int>(), std::declval<int>())) std::__1::__invoke[abi:se200000]<int (*&)(int, int), int, int>(__f=0x000000016fdff280, __args=0x000000016fdff224, __args=0x000000016fdff220) at invoke.h:149:25 frame #2: 0x000000010000399c a.out`int std::__1::__invoke_void_return_wrapper<int, false>::__call[abi:se200000]<int (*&)(int, int), int, int>(__args=0x000000016fdff280, __args=0x000000016fdff224, __args=0x000000016fdff220) at invoke.h:216:12 frame #3: 0x0000000100003968 a.out`std::__1::__function::__alloc_func<int (*)(int, int), std::__1::allocator<int (*)(int, int)>, int (int, int)>::operator()[abi:se200000](this=0x000000016fdff280, __arg=0x000000016fdff224, __arg=0x000000016fdff220) at function.h:171:12 frame #4: 0x00000001000026bc a.out`std::__1::__function::__func<int (*)(int, int), std::__1::allocator<int (*)(int, int)>, int (int, int)>::operator()(this=0x000000016fdff278, __arg=0x000000016fdff224, __arg=0x000000016fdff220) at function.h:313:10 frame #5: 0x0000000100003c38 a.out`std::__1::__function::__value_func<int (int, int)>::operator()[abi:se200000](this=0x000000016fdff278, __args=0x000000016fdff224, __args=0x000000016fdff220) const at function.h:430:12 frame #6: 0x0000000100002038 a.out`std::__1::function<int (int, int)>::operator()(this= Function = foo(int, int) , __arg=1, __arg=1) const at function.h:989:10 frame #7: 0x0000000100001f64 a.out`main(argc=1, argv=0x000000016fdff4f8) at main.cpp:9:10 frame #8: 0x0000000183cdf154 dyld`start + 2476 (lldb) ``` after ``` (lldb) bt * thread #1, queue = 'com.apple.main-thread', stop reason = breakpoint 1.1 * frame #0: 0x0000000100001f04 a.out`foo(x=1, y=1) at main.cpp:4:10 frame #1: 0x0000000100003a00 a.out`decltype(std::declval<int (*&)(int, int)>()(std::declval<int>(), std::declval<int>())) std::__1::__invoke[abi:se200000]<int (*&)(int, int), int, int>(__f=0x000000016fdff280, __args=0x000000016fdff224, __args=0x000000016fdff220) at invoke.h:149:25 frame #2: 0x000000010000399c a.out`int std::__1::__invoke_void_return_wrapper<int, false>::__call[abi:se200000]<int (*&)(int, int), int, int>(__args=0x000000016fdff280, __args=0x000000016fdff224, __args=0x000000016fdff220) at invoke.h:216:12 frame #6: 0x0000000100002038 a.out`std::__1::function<int (int, int)>::operator()(this= Function = foo(int, int) , __arg=1, __arg=1) const at function.h:989:10 frame #7: 0x0000000100001f64 a.out`main(argc=1, argv=0x000000016fdff4f8) at main.cpp:9:10 frame #8: 0x0000000183cdf154 dyld`start + 2476 Note: Some frames were hidden by frame recognizers ```

) Currently, process of replacing bitwise operations consisting of `LSR`/`LSL` with `And` is performed by `DAGCombiner`. However, in certain cases, the `AND` generated by this process can be removed. Consider following case: ``` lsr x8, x8, llvm#56 and x8, x8, #0xfc ldr w0, [x2, x8] ret ``` In this case, we can remove the `AND` by changing the target of `LDR` to `[X2, X8, LSL #2]` and right-shifting amount change to 56 to 58. after changed: ``` lsr x8, x8, llvm#58 ldr w0, [x2, x8, lsl #2] ret ``` This patch checks to see if the `SHIFTING` + `AND` operation on load target can be optimized and optimizes it if it can.

`JITDylibSearchOrderResolver` local variable can be destroyed before completion of all callbacks. Capture it together with `Deps` in `OnEmitted` callback. Original error: ``` ==2035==ERROR: AddressSanitizer: stack-use-after-return on address 0x7bebfa155b70 at pc 0x7ff2a9a88b4a bp 0x7bec08d51980 sp 0x7bec08d51978 READ of size 8 at 0x7bebfa155b70 thread T87 (tf_xla-cpu-llvm) #0 0x7ff2a9a88b49 in operator() llvm/lib/ExecutionEngine/Orc/RTDyldObjectLinkingLayer.cpp:55:58 #1 0x7ff2a9a88b49 in __invoke<(lambda at llvm/lib/ExecutionEngine/Orc/RTDyldObjectLinkingLayer.cpp:55:9) &, const llvm::DenseMap<llvm::orc::JITDylib *, llvm::DenseSet<llvm::orc::SymbolStringPtr, llvm::DenseMapInfo<llvm::orc::SymbolStringPtr, void> >, llvm::DenseMapInfo<llvm::orc::JITDylib *, void>, llvm::detail::DenseMapPair<llvm::orc::JITDylib *, llvm::DenseSet<llvm::orc::SymbolStringPtr, llvm::DenseMapInfo<llvm::orc::SymbolStringPtr, void> > > > &> libcxx/include/__type_traits/invoke.h:149:25 #2 0x7ff2a9a88b49 in __call<(lambda at llvm/lib/ExecutionEngine/Orc/RTDyldObjectLinkingLayer.cpp:55:9) &, const llvm::DenseMap<llvm::orc::JITDylib *, llvm::DenseSet<llvm::orc::SymbolStringPtr, llvm::DenseMapInfo<llvm::orc::SymbolStringPtr, void> >, llvm::DenseMapInfo<llvm::orc::JITDylib *, void>, llvm::detail::DenseMapPair<llvm::orc::JITDylib *, llvm::DenseSet<llvm::orc::SymbolStringPtr, llvm::DenseMapInfo<llvm::orc::SymbolStringPtr, void> > > > &> libcxx/include/__type_traits/invoke.h:224:5 #3 0x7ff2a9a88b49 in operator() libcxx/include/__functional/function.h:210:12 #4 0x7ff2a9a88b49 in void std::__u::__function::__policy_invoker<void (llvm::DenseMap<llvm::orc::JITDylib*, llvm::DenseSet<llvm::orc::SymbolStringPtr, ```

``` UBSan-Standalone-sparc :: TestCases/Misc/Linux/diag-stacktrace.cpp ``` `FAIL`s on 32 and 64-bit Linux/sparc64 (and on Solaris/sparcv9, too: the test isn't Linux-specific at all). With `UBSAN_OPTIONS=fast_unwind_on_fatal=1`, the stack trace shows a duplicate innermost frame: ``` compiler-rt/test/ubsan/TestCases/Misc/Linux/diag-stacktrace.cpp:14:31: runtime error: execution reached the end of a value-returning function without returning a value #0 0x7003a708 in f() compiler-rt/test/ubsan/TestCases/Misc/Linux/diag-stacktrace.cpp:14:35 #1 0x7003a708 in f() compiler-rt/test/ubsan/TestCases/Misc/Linux/diag-stacktrace.cpp:14:35 #2 0x7003a714 in g() compiler-rt/test/ubsan/TestCases/Misc/Linux/diag-stacktrace.cpp:17:38 ``` which isn't seen with `fast_unwind_on_fatal=0`. This turns out to be another fallout from fixing `__builtin_return_address`/`__builtin_extract_return_addr` on SPARC. In `sanitizer_stacktrace_sparc.cpp` (`BufferedStackTrace::UnwindFast`) the `pc` arg is the return address, while `pc1` from the stack frame (`fr_savpc`) is the address of the `call` insn, leading to a double entry for the innermost frame in `trace_buffer[]`. This patch fixes this by moving the adjustment before all uses. Tested on `sparc64-unknown-linux-gnu` and `sparcv9-sun-solaris2.11` (with the `ubsan/TestCases/Misc/Linux` tests enabled). (cherry picked from commit 3368a32)

Static destructor can race with calls to notify and trigger tsan warning. ``` WARNING: ThreadSanitizer: data race (pid=5787) Write of size 1 at 0x55bec9df8de8 by thread T23: #0 pthread_mutex_destroy [third_party/llvm/llvm-project/compiler-rt/lib/tsan/rtl/tsan_interceptors_posix.cpp:1344](third_party/llvm/llvm-project/compiler-rt/lib/tsan/rtl/tsan_interceptors_posix.cpp?l=1344&cl=669089572):3 (be1eb158bb70fc9cf7be2db70407e512890e5c6e20720cd88c69d7d9c26ea531_0200d5f71908+0x1b12affb) (BuildId: ff25ace8b17d9863348bb1759c47246c) #1 __libcpp_recursive_mutex_destroy [third_party/crosstool/v18/stable/src/libcxx/include/__thread/support/pthread.h:91](third_party/crosstool/v18/stable/src/libcxx/include/__thread/support/pthread.h?l=91&cl=669089572):10 (be1eb158bb70fc9cf7be2db70407e512890e5c6e20720cd88c69d7d9c26ea531_0200d5f71908+0x4523d4e9) (BuildId: ff25ace8b17d9863348bb1759c47246c) #2 std::__tsan::recursive_mutex::~recursive_mutex() [third_party/crosstool/v18/stable/src/libcxx/src/mutex.cpp:52](third_party/crosstool/v18/stable/src/libcxx/src/mutex.cpp?l=52&cl=669089572):11 (be1eb158bb70fc9cf7be2db70407e512890e5c6e20720cd88c69d7d9c26ea531_0200d5f71908+0x4523d4e9) #3 ~SmartMutex [third_party/llvm/llvm-project/llvm/include/llvm/Support/Mutex.h:28](third_party/llvm/llvm-project/llvm/include/llvm/Support/Mutex.h?l=28&cl=669089572):11 (be1eb158bb70fc9cf7be2db70407e512890e5c6e20720cd88c69d7d9c26ea531_0200d5f71908+0x2bcaedfe) (BuildId: ff25ace8b17d9863348bb1759c47246c) #4 (anonymous namespace)::PerfJITEventListener::~PerfJITEventListener() [third_party/llvm/llvm-project/llvm/lib/ExecutionEngine/PerfJITEvents/PerfJITEventListener.cpp:65](third_party/llvm/llvm-project/llvm/lib/ExecutionEngine/PerfJITEvents/PerfJITEventListener.cpp?l=65&cl=669089572):3 (be1eb158bb70fc9cf7be2db70407e512890e5c6e20720cd88c69d7d9c26ea531_0200d5f71908+0x2bcaedfe) #5 cxa_at_exit_callback_installed_at(void*) [third_party/llvm/llvm-project/compiler-rt/lib/tsan/rtl/tsan_interceptors_posix.cpp:437](third_party/llvm/llvm-project/compiler-rt/lib/tsan/rtl/tsan_interceptors_posix.cpp?l=437&cl=669089572):3 (be1eb158bb70fc9cf7be2db70407e512890e5c6e20720cd88c69d7d9c26ea531_0200d5f71908+0x1b172cb9) (BuildId: ff25ace8b17d9863348bb1759c47246c) #6 llvm::JITEventListener::createPerfJITEventListener() [third_party/llvm/llvm-project/llvm/lib/ExecutionEngine/PerfJITEvents/PerfJITEventListener.cpp:496](third_party/llvm/llvm-project/llvm/lib/ExecutionEngine/PerfJITEvents/PerfJITEventListener.cpp?l=496&cl=669089572):3 (be1eb158bb70fc9cf7be2db70407e512890e5c6e20720cd88c69d7d9c26ea531_0200d5f71908+0x2bcad8f5) (BuildId: ff25ace8b17d9863348bb1759c47246c) ``` ``` Previous atomic read of size 1 at 0x55bec9df8de8 by thread T192 (mutexes: write M0, write M1): #0 pthread_mutex_unlock [third_party/llvm/llvm-project/compiler-rt/lib/tsan/rtl/tsan_interceptors_posix.cpp:1387](third_party/llvm/llvm-project/compiler-rt/lib/tsan/rtl/tsan_interceptors_posix.cpp?l=1387&cl=669089572):3 (be1eb158bb70fc9cf7be2db70407e512890e5c6e20720cd88c69d7d9c26ea531_0200d5f71908+0x1b12b6bb) (BuildId: ff25ace8b17d9863348bb1759c47246c) #1 __libcpp_recursive_mutex_unlock [third_party/crosstool/v18/stable/src/libcxx/include/__thread/support/pthread.h:87](third_party/crosstool/v18/stable/src/libcxx/include/__thread/support/pthread.h?l=87&cl=669089572):10 (be1eb158bb70fc9cf7be2db70407e512890e5c6e20720cd88c69d7d9c26ea531_0200d5f71908+0x4523d589) (BuildId: ff25ace8b17d9863348bb1759c47246c) #2 std::__tsan::recursive_mutex::unlock() [third_party/crosstool/v18/stable/src/libcxx/src/mutex.cpp:64](third_party/crosstool/v18/stable/src/libcxx/src/mutex.cpp?l=64&cl=669089572):11 (be1eb158bb70fc9cf7be2db70407e512890e5c6e20720cd88c69d7d9c26ea531_0200d5f71908+0x4523d589) #3 unlock [third_party/llvm/llvm-project/llvm/include/llvm/Support/Mutex.h:47](third_party/llvm/llvm-project/llvm/include/llvm/Support/Mutex.h?l=47&cl=669089572):16 (be1eb158bb70fc9cf7be2db70407e512890e5c6e20720cd88c69d7d9c26ea531_0200d5f71908+0x2bcaf968) (BuildId: ff25ace8b17d9863348bb1759c47246c) #4 ~lock_guard [third_party/crosstool/v18/stable/src/libcxx/include/__mutex/lock_guard.h:39](third_party/crosstool/v18/stable/src/libcxx/include/__mutex/lock_guard.h?l=39&cl=669089572):101 (be1eb158bb70fc9cf7be2db70407e512890e5c6e20720cd88c69d7d9c26ea531_0200d5f71908+0x2bcaf968) #5 (anonymous namespace)::PerfJITEventListener::notifyObjectLoaded(unsigned long, llvm::object::ObjectFile const&, llvm::RuntimeDyld::LoadedObjectInfo const&) [third_party/llvm/llvm-project/llvm/lib/ExecutionEngine/PerfJITEvents/PerfJITEventListener.cpp:290](https://cs.corp.google.com/piper///depot/google3/third_party/llvm/llvm-project/llvm/lib/ExecutionEngine/PerfJITEvents/PerfJITEventListener.cpp?l=290&cl=669089572):1 (be1eb158bb70fc9cf7be2db70407e512890e5c6e20720cd88c69d7d9c26ea531_0200d5f71908+0x2bcaf968) #6 llvm::orc::RTDyldObjectLinkingLayer::onObjEmit(llvm::orc::MaterializationResponsibility&, llvm::object::OwningBinary<llvm::object::ObjectFile>, std::__tsan::unique_ptr<llvm::RuntimeDyld::MemoryManager, std::__tsan::default_delete<llvm::RuntimeDyld::MemoryManager>>, std::__tsan::unique_ptr<llvm::RuntimeDyld::LoadedObjectInfo, std::__tsan::default_delete<llvm::RuntimeDyld::LoadedObjectInfo>>, std::__tsan::unique_ptr<llvm::DenseMap<llvm::orc::JITDylib*, llvm::DenseSet<llvm::orc::SymbolStringPtr, llvm::DenseMapInfo<llvm::orc::SymbolStringPtr, void>>, llvm::DenseMapInfo<llvm::orc::JITDylib*, void>, llvm::detail::DenseMapPair<llvm::orc::JITDylib*, llvm::DenseSet<llvm::orc::SymbolStringPtr, llvm::DenseMapInfo<llvm::orc::SymbolStringPtr, void>>>>, std::__tsan::default_delete<llvm::DenseMap<llvm::orc::JITDylib*, llvm::DenseSet<llvm::orc::SymbolStringPtr, llvm::DenseMapInfo<llvm::orc::SymbolStringPtr, void>>, llvm::DenseMapInfo<llvm::orc::JITDylib*, void>, llvm::detail::DenseMapPair<llvm::orc::JITDylib*, llvm::DenseSet<llvm::orc::SymbolStringPtr, llvm::DenseMapInfo<llvm::orc::SymbolStringPtr, void>>>>>>, llvm::Error) [third_party/llvm/llvm-project/llvm/lib/ExecutionEngine/Orc/RTDyldObjectLinkingLayer.cpp:386](https://cs.corp.google.com/piper///depot/google3/third_party/llvm/llvm-project/llvm/lib/ExecutionEngine/Orc/RTDyldObjectLinkingLayer.cpp?l=386&cl=669089572):10 (be1eb158bb70fc9cf7be2db70407e512890e5c6e20720cd88c69d7d9c26ea531_0200d5f71908+0x2bc404a8) (BuildId: ff25ace8b17d9863348bb1759c47246c) ```

…llvm#94981) This extends default argument deduction to cover class templates as well, applying only to partial ordering, adding to the provisional wording introduced in llvm#89807. This solves some ambuguity introduced in P0522 regarding how template template parameters are partially ordered, and should reduce the negative impact of enabling `-frelaxed-template-template-args` by default. Given the following example: ```C++ template <class T1, class T2 = float> struct A; template <class T3> struct B; template <template <class T4> class TT1, class T5> struct B<TT1<T5>>; // #1 template <class T6, class T7> struct B<A<T6, T7>>; // #2 template struct B<A<int>>; ``` Prior to P0522, `#2` was picked. Afterwards, this became ambiguous. This patch restores the pre-P0522 behavior, `#2` is picked again.

When SPARC Asan testing is enabled by PR llvm#107405, many Linux/sparc64 tests just hang like ``` #0 0xf7ae8e90 in syscall () from /usr/lib32/libc.so.6 #1 0x701065e8 in __sanitizer::FutexWait(__sanitizer::atomic_uint32_t*, unsigned int) () at compiler-rt/lib/sanitizer_common/sanitizer_linux.cpp:766 #2 0x70107c90 in Wait () at compiler-rt/lib/sanitizer_common/sanitizer_mutex.cpp:35 #3 0x700f7cac in Lock () at compiler-rt/lib/asan/../sanitizer_common/sanitizer_mutex.h:196 #4 Lock () at compiler-rt/lib/asan/../sanitizer_common/sanitizer_thread_registry.h:98 #5 LockThreads () at compiler-rt/lib/asan/asan_thread.cpp:489 #6 0x700e9c8c in __asan::BeforeFork() () at compiler-rt/lib/asan/asan_posix.cpp:157 #7 0xf7ac83f4 in ?? () from /usr/lib32/libc.so.6 Backtrace stopped: previous frame identical to this frame (corrupt stack?) ``` It turns out that this happens in tests using `internal_fork` (e.g. invoking `llvm-symbolizer`): unlike most other Linux targets, which use `clone`, Linux/sparc64 has to use `__fork` instead. While `clone` doesn't trigger `pthread_atfork` handlers, `__fork` obviously does, causing the hang. To avoid this, this patch disables `InstallAtForkHandler` and lets the ASan tests run to completion. Tested on `sparc64-unknown-linux-gnu`.

…ap (llvm#108825) This attempts to improve user-experience when LLDB stops on a verbose_trap. Currently if a `__builtin_verbose_trap` triggers, we display the first frame above the call to the verbose_trap. So in the newly added test case, we would've previously stopped here: ``` (lldb) run Process 28095 launched: '/Users/michaelbuch/a.out' (arm64) Process 28095 stopped * thread #1, queue = 'com.apple.main-thread', stop reason = Bounds error: out-of-bounds access frame #1: 0x0000000100003f5c a.out`std::__1::vector<int>::operator[](this=0x000000016fdfebef size=0, (null)=10) at verbose_trap.cpp:6:9 3 template <typename T> 4 struct vector { 5 void operator[](unsigned) { -> 6 __builtin_verbose_trap("Bounds error", "out-of-bounds access"); 7 } 8 }; ``` After this patch, we would stop in the first non-`std` frame: ``` (lldb) run Process 27843 launched: '/Users/michaelbuch/a.out' (arm64) Process 27843 stopped * thread #1, queue = 'com.apple.main-thread', stop reason = Bounds error: out-of-bounds access frame #2: 0x0000000100003f44 a.out`g() at verbose_trap.cpp:14:5 11 12 void g() { 13 std::vector<int> v; -> 14 v[10]; 15 } 16 ``` rdar://134490328

…ext is not fully initialized (llvm#110481) As this comment around target initialization implies: ``` // This can be NULL if we don't know anything about the architecture or if // the target for an architecture isn't enabled in the llvm/clang that we // built ``` There are cases where we might fail to call `InitBuiltinTypes` when creating the backing `ASTContext` for a `TypeSystemClang`. If that happens, the builtins `QualType`s, e.g., `VoidPtrTy`/`IntTy`/etc., are not initialized and dereferencing them as we do in `GetBuiltinTypeForEncodingAndBitSize` (and other places) will lead to nullptr-dereferences. Example backtrace: ``` (lldb) run Assertion failed: (!isNull() && "Cannot retrieve a NULL type pointer"), function getCommonPtr, file Type.h, line 958. Process 2680 stopped * thread #15, name = '<lldb.process.internal-state(pid=2712)>', stop reason = hit program assert frame #4: 0x000000010cdf3cdc liblldb.20.0.0git.dylib`DWARFASTParserClang::ExtractIntFromFormValue(lldb_private::CompilerType const&, lldb_private::plugin::dwarf::DWARFFormValue const&) const (.cold.1) + liblldb.20.0.0git.dylib`DWARFASTParserClang::ParseObjCMethod(lldb_private::ObjCLanguage::MethodName const&, lldb_private::plugin::dwarf::DWARFDIE const&, lldb_private::CompilerType, ParsedDWARFTypeAttributes , bool) (.cold.1): -> 0x10cdf3cdc <+0>: stp x29, x30, [sp, #-0x10]! 0x10cdf3ce0 <+4>: mov x29, sp 0x10cdf3ce4 <+8>: adrp x0, 545 0x10cdf3ce8 <+12>: add x0, x0, #0xa25 ; "ParseObjCMethod" Target 0: (lldb) stopped. (lldb) bt * thread #15, name = '<lldb.process.internal-state(pid=2712)>', stop reason = hit program assert frame #0: 0x0000000180d08600 libsystem_kernel.dylib`__pthread_kill + 8 frame #1: 0x0000000180d40f50 libsystem_pthread.dylib`pthread_kill + 288 frame #2: 0x0000000180c4d908 libsystem_c.dylib`abort + 128 frame #3: 0x0000000180c4cc1c libsystem_c.dylib`__assert_rtn + 284 * frame #4: 0x000000010cdf3cdc liblldb.20.0.0git.dylib`DWARFASTParserClang::ExtractIntFromFormValue(lldb_private::CompilerType const&, lldb_private::plugin::dwarf::DWARFFormValue const&) const (.cold.1) + frame #5: 0x0000000109d30acc liblldb.20.0.0git.dylib`lldb_private::TypeSystemClang::GetBuiltinTypeForEncodingAndBitSize(lldb::Encoding, unsigned long) + 1188 frame #6: 0x0000000109aaaed4 liblldb.20.0.0git.dylib`DynamicLoaderMacOS::NotifyBreakpointHit(void*, lldb_private::StoppointCallbackContext*, unsigned long long, unsigned long long) + 384 ``` This patch adds a one-time user-visible warning for when we fail to initialize the AST to indicate that initialization went wrong for the given target. Additionally, we add checks for whether one of the `ASTContext` `QualType`s is invalid before dereferencing any builtin types. The warning would look as follows: ``` (lldb) target create "a.out" Current executable set to 'a.out' (arm64). (lldb) b main warning: Failed to initialize builtin ASTContext types for target 'some-unknown-triple'. Printing variables may behave unexpectedly. Breakpoint 1: where = a.out`main + 8 at stepping.cpp:5:14, address = 0x0000000100003f90 ``` rdar://134869779

Fixes llvm#102703. https://godbolt.org/z/nfj8xsb1Y The following pattern: ``` %2 = and i32 %0, 254 %3 = icmp eq i32 %2, 0 ``` is optimised by instcombine into: ```%3 = icmp ult i32 %0, 2``` However, post instcombine leads to worse aarch64 than the unoptimised version. Pre instcombine: ``` tst w0, #0xfe cset w0, eq ret ``` Post instcombine: ``` and w8, w0, #0xff cmp w8, #2 cset w0, lo ret ``` In the unoptimised version, SelectionDAG converts `SETCC (AND X 254) 0 EQ` into `CSEL 0 1 1 (ANDS X 254)`, which gets emitted as a `tst`. In the optimised version, SelectionDAG converts `SETCC (AND X 255) 2 ULT` into `CSEL 0 1 2 (SUBS (AND X 255) 2)`, which gets emitted as an `and`/`cmp`. This PR adds an optimisation to `AArch64ISelLowering`, converting `SETCC (AND X Y) Z ULT` into `SETCC (AND X (Y & ~(Z - 1))) 0 EQ` when `Z` is a power of two. This makes SelectionDAG/Codegen produce the same optimised code for both examples.

…1409)" This reverts commit a89e016. This is being reverted because it broke the test: Unwind/trap_frame_sym_ctx.test /Users/ec2-user/jenkins/workspace/llvm.org/lldb-cmake/llvm-project/lldb/test/Shell/Unwind/trap_frame_sym_ctx.test:21:10: error: CHECK: expected string not found in input CHECK: frame #2: {{.*}}`main

…ates explicitly specialized for an implicitly instantiated class template specialization (llvm#113464) Consider the following: ``` template<typename T> struct A { template<typename U> struct B { static constexpr int x = 0; // #1 }; template<typename U> struct B<U*> { static constexpr int x = 1; // #2 }; }; template<> template<typename U> struct A<long>::B { static constexpr int x = 2; // #3 }; static_assert(A<short>::B<int>::y == 0); // uses #1 static_assert(A<short>::B<int*>::y == 1); // uses #2 static_assert(A<long>::B<int>::y == 2); // uses #3 static_assert(A<long>::B<int*>::y == 2); // uses #3 ``` According to [temp.spec.partial.member] p2: > If the primary member template is explicitly specialized for a given (implicit) specialization of the enclosing class template, the partial specializations of the member template are ignored for this specialization of the enclosing class template. If a partial specialization of the member template is explicitly specialized for a given (implicit) specialization of the enclosing class template, the primary member template and its other partial specializations are still considered for this specialization of the enclosing class template. The example above fails to compile because we currently don't implement [temp.spec.partial.member] p2. This patch implements the wording, fixing llvm#51051.

…plementation (llvm#108413. llvm#117704) (llvm#117894) Relands llvm#117704, which relanded changes from llvm#108413 - this was reverted due to build issues. The new offload library did not build with `LIBOMPTARGET_OMPT_SUPPORT` enabled, which was not picked up by pre-merge testing. The last commit contains the fix; everything else is otherwise identical to the approved PR. ___ ### New API Previous discussions at the LLVM/Offload meeting have brought up the need for a new API for exposing the functionality of the plugins. This change introduces a very small subset of a new API, which is primarily for testing the offload tooling and demonstrating how a new API can fit into the existing code base without being too disruptive. Exact designs for these entry points and future additions can be worked out over time. The new API does however introduce the bare minimum functionality to implement device discovery for Unified Runtime and SYCL. This means that the `urinfo` and `sycl-ls` tools can be used on top of Offload. A (rough) implementation of a Unified Runtime adapter (aka plugin) for Offload is available [here](https://github.com/callumfare/unified-runtime/tree/offload_adapter). Our intention is to maintain this and use it to implement and test Offload API changes with SYCL. ### Demoing the new API ```sh # From the runtime build directory $ ninja LibomptUnitTests $ OFFLOAD_TRACE=1 ./offload/unittests/OffloadAPI/offload.unittests ``` ### Open questions and future work * Only some of the available device info is exposed, and not all the possible device queries needed for SYCL are implemented by the plugins. A sensible next step would be to refactor and extend the existing device info queries in the plugins. The existing info queries are all strings, but the new API introduces the ability to return any arbitrary type. * It may be sensible at some point for the plugins to implement the new API directly, and the higher level code on top of it could be made generic, but this is more of a long-term possibility.

…abort (llvm#117603) Hey guys, I found that Flang's built-in ABORT function is incomplete when I was using it. Compared with gfortran's ABORT (which can both abort and print out a backtrace), flang's ABORT implementation lacks the function of printing out a backtrace. This feature is essential for debugging and understanding the call stack at the failure point. To solve this problem, I completed the "// TODO:" of the abort function, and then implemented an additional built-in function BACKTRACE for flang. After a brief reading of the relevant source code, I used backtrace and backtrace_symbols in "execinfo.h" to quickly implement this. But since I used the above two functions directly, my implementation is slightly different from gfortran's implementation (in the output, the function call stack before main is additionally output, and the function line number is missing). In addition, since I used the above two functions, I did not need to add -g to embed debug information into the ELF file, but needed -rdynamic to ensure that the symbols are added to the dynamic symbol table (so that the function name will be printed out). Here is a comparison of the output between gfortran 's backtrace and my implementation: gfortran's implemention output: ``` #0 0x557eb71f4184 in testfun2_ at /home/hunter/plct/fortran/test.f90:5 #1 0x557eb71f4165 in testfun1_ at /home/hunter/plct/fortran/test.f90:13 #2 0x557eb71f4192 in test_backtrace at /home/hunter/plct/fortran/test.f90:17 #3 0x557eb71f41ce in main at /home/hunter/plct/fortran/test.f90:18 ``` my impelmention output: ``` Backtrace: #0 ./test(_FortranABacktrace+0x32) [0x574f07efcf92] #1 ./test(testfun2_+0x14) [0x574f07efc7b4] #2 ./test(testfun1_+0xd) [0x574f07efc7cd] #3 ./test(_QQmain+0x9) [0x574f07efc7e9] #4 ./test(main+0x12) [0x574f07efc802] #5 /usr/lib/libc.so.6(+0x25e08) [0x76954694fe08] #6 /usr/lib/libc.so.6(__libc_start_main+0x8c) [0x76954694fecc] #7 ./test(_start+0x25) [0x574f07efc6c5] ``` test program is: ``` function testfun2() result(err) implicit none integer :: err err = 1 call backtrace end function testfun2 subroutine testfun1() implicit none integer :: err integer :: testfun2 err = testfun2() end subroutine testfun1 program test_backtrace call testfun1() end program test_backtrace ``` I am well aware of the importance of line numbers, so I am now working on implementing line numbers (by parsing DWARF information) and supporting cross-platform (Windows) support.

…w API implementation (llvm#108413. llvm#117704)" (llvm#117995) Reverts llvm#117894 Buildbot failures in OpenMP/Offload bots. https://lab.llvm.org/buildbot/#/builders/30/builds/11193

…ne symbol size as symbols are created (llvm#117079)" This reverts commit ba668eb. Below test started failing again on x86_64 macOS CI. We're unsure if this patch is the exact cause, but since this patch has broken this test before, we speculatively revert it to see if it was indeed the root cause. ``` FAIL: lldb-shell :: Unwind/trap_frame_sym_ctx.test (1692 of 2162) ******************** TEST 'lldb-shell :: Unwind/trap_frame_sym_ctx.test' FAILED ******************** Exit Code: 1 Command Output (stderr): -- RUN: at line 7: /Users/ec2-user/jenkins/workspace/llvm.org/lldb-cmake/lldb-build/bin/clang --target=specify-a-target-or-use-a-_host-substitution --target=x86_64-apple-darwin22.6.0 -isysroot /Applications/Xcode-beta.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX.sdk -fmodules-cache-path=/Users/ec2-user/jenkins/workspace/llvm.org/lldb-cmake/lldb-build/lldb-test-build.noindex/module-cache-clang/lldb-shell /Users/ec2-user/jenkins/workspace/llvm.org/lldb-cmake/llvm-project/lldb/test/Shell/Unwind/Inputs/call-asm.c /Users/ec2-user/jenkins/workspace/llvm.org/lldb-cmake/llvm-project/lldb/test/Shell/Unwind/Inputs/trap_frame_sym_ctx.s -o /Users/ec2-user/jenkins/workspace/llvm.org/lldb-cmake/lldb-build/tools/lldb/test/Shell/Unwind/Output/trap_frame_sym_ctx.test.tmp + /Users/ec2-user/jenkins/workspace/llvm.org/lldb-cmake/lldb-build/bin/clang --target=specify-a-target-or-use-a-_host-substitution --target=x86_64-apple-darwin22.6.0 -isysroot /Applications/Xcode-beta.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX.sdk -fmodules-cache-path=/Users/ec2-user/jenkins/workspace/llvm.org/lldb-cmake/lldb-build/lldb-test-build.noindex/module-cache-clang/lldb-shell /Users/ec2-user/jenkins/workspace/llvm.org/lldb-cmake/llvm-project/lldb/test/Shell/Unwind/Inputs/call-asm.c /Users/ec2-user/jenkins/workspace/llvm.org/lldb-cmake/llvm-project/lldb/test/Shell/Unwind/Inputs/trap_frame_sym_ctx.s -o /Users/ec2-user/jenkins/workspace/llvm.org/lldb-cmake/lldb-build/tools/lldb/test/Shell/Unwind/Output/trap_frame_sym_ctx.test.tmp clang: warning: argument unused during compilation: '-fmodules-cache-path=/Users/ec2-user/jenkins/workspace/llvm.org/lldb-cmake/lldb-build/lldb-test-build.noindex/module-cache-clang/lldb-shell' [-Wunused-command-line-argument] RUN: at line 8: /Users/ec2-user/jenkins/workspace/llvm.org/lldb-cmake/lldb-build/bin/lldb --no-lldbinit -S /Users/ec2-user/jenkins/workspace/llvm.org/lldb-cmake/lldb-build/tools/lldb/test/Shell/lit-lldb-init-quiet /Users/ec2-user/jenkins/workspace/llvm.org/lldb-cmake/lldb-build/tools/lldb/test/Shell/Unwind/Output/trap_frame_sym_ctx.test.tmp -s /Users/ec2-user/jenkins/workspace/llvm.org/lldb-cmake/llvm-project/lldb/test/Shell/Unwind/trap_frame_sym_ctx.test -o exit | /Users/ec2-user/jenkins/workspace/llvm.org/lldb-cmake/lldb-build/bin/FileCheck /Users/ec2-user/jenkins/workspace/llvm.org/lldb-cmake/llvm-project/lldb/test/Shell/Unwind/trap_frame_sym_ctx.test + /Users/ec2-user/jenkins/workspace/llvm.org/lldb-cmake/lldb-build/bin/lldb --no-lldbinit -S /Users/ec2-user/jenkins/workspace/llvm.org/lldb-cmake/lldb-build/tools/lldb/test/Shell/lit-lldb-init-quiet /Users/ec2-user/jenkins/workspace/llvm.org/lldb-cmake/lldb-build/tools/lldb/test/Shell/Unwind/Output/trap_frame_sym_ctx.test.tmp -s /Users/ec2-user/jenkins/workspace/llvm.org/lldb-cmake/llvm-project/lldb/test/Shell/Unwind/trap_frame_sym_ctx.test -o exit + /Users/ec2-user/jenkins/workspace/llvm.org/lldb-cmake/lldb-build/bin/FileCheck /Users/ec2-user/jenkins/workspace/llvm.org/lldb-cmake/llvm-project/lldb/test/Shell/Unwind/trap_frame_sym_ctx.test /Users/ec2-user/jenkins/workspace/llvm.org/lldb-cmake/llvm-project/lldb/test/Shell/Unwind/trap_frame_sym_ctx.test:21:10: error: CHECK: expected string not found in input ^ <stdin>:26:64: note: scanning from here frame #1: 0x0000000100003ee9 trap_frame_sym_ctx.test.tmp`tramp ^ <stdin>:27:2: note: possible intended match here frame #2: 0x00007ff7bfeff6c0 ^ Input file: <stdin> Check file: /Users/ec2-user/jenkins/workspace/llvm.org/lldb-cmake/llvm-project/lldb/test/Shell/Unwind/trap_frame_sym_ctx.test -dump-input=help explains the following input dump. Input was: <<<<<< . . . 21: 0x100003ed1 <+0>: pushq %rbp 22: 0x100003ed2 <+1>: movq %rsp, %rbp 23: (lldb) thread backtrace -u 24: * thread #1, queue = 'com.apple.main-thread', stop reason = breakpoint 1.1 25: * frame #0: 0x0000000100003ecc trap_frame_sym_ctx.test.tmp`bar 26: frame #1: 0x0000000100003ee9 trap_frame_sym_ctx.test.tmp`tramp check:21'0 X error: no match found 27: frame #2: 0x00007ff7bfeff6c0 check:21'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ check:21'1 ? possible intended match 28: frame #3: 0x0000000100003ec6 trap_frame_sym_ctx.test.tmp`main + 22 check:21'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 29: frame #4: 0x0000000100003ec6 trap_frame_sym_ctx.test.tmp`main + 22 check:21'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 30: frame #5: 0x00007ff8193cc41f dyld`start + 1903 check:21'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 31: (lldb) exit check:21'0 ~~~~~~~~~~~~ >>>>>> ```

## Description This PR fixes a segmentation fault that occurs when passing options requiring arguments via `-Xopenmp-target=<triple>`. The issue was that the function `Driver::getOffloadArchs` did not properly parse the extracted option, but instead assumed it was valid, leading to a crash when incomplete arguments were provided. ## Backtrace ```sh llvm-project/build/bin/clang++ main.cpp -fopenmp=libomp -fopenmp-targets=powerpc64le-ibm-linux-gnu -Xopenmp-target=powerpc64le-ibm-linux-gnu -o PLEASE submit a bug report to https://github.com/llvm/llvm-project/issues/ and include the crash backtrace, preprocessed source, and associated run script. Stack dump: 0. Program arguments: llvm-project/build/bin/clang++ main.cpp -fopenmp=libomp -fopenmp-targets=powerpc64le-ibm-linux-gnu -Xopenmp-target=powerpc64le-ibm-linux-gnu -o 1. Compilation construction 2. Building compilation actions #0 0x0000562fb21c363b llvm::sys::PrintStackTrace(llvm::raw_ostream&, int) (llvm-project/build/bin/clang+++0x392f63b) #1 0x0000562fb21c0e3c SignalHandler(int) Signals.cpp:0:0 #2 0x00007fcbf6c81420 __restore_rt (/lib/x86_64-linux-gnu/libpthread.so.0+0x14420) #3 0x0000562fb1fa5d70 llvm::opt::Option::matches(llvm::opt::OptSpecifier) const (llvm-project/build/bin/clang+++0x3711d70) #4 0x0000562fb2a78e7d clang::driver::Driver::getOffloadArchs(clang::driver::Compilation&, llvm::opt::DerivedArgList const&, clang::driver::Action::OffloadKind, clang::driver::ToolChain const*, bool) const (llvm-project/build/bin/clang+++0x41e4e7d) #5 0x0000562fb2a7a9aa clang::driver::Driver::BuildOffloadingActions(clang::driver::Compilation&, llvm::opt::DerivedArgList&, std::pair<clang::driver::types::ID, llvm::opt::Arg const*> const&, clang::driver::Action*) const (.part.1164) Driver.cpp:0:0 #6 0x0000562fb2a7c093 clang::driver::Driver::BuildActions(clang::driver::Compilation&, llvm::opt::DerivedArgList&, llvm::SmallVector<std::pair<clang::driver::types::ID, llvm::opt::Arg const*>, 16u> const&, llvm::SmallVector<clang::driver::Action*, 3u>&) const (llvm-project/build/bin/clang+++0x41e8093) #7 0x0000562fb2a8395d clang::driver::Driver::BuildCompilation(llvm::ArrayRef<char const*>) (llvm-project/build/bin/clang+++0x41ef95d) #8 0x0000562faf92684c clang_main(int, char**, llvm::ToolContext const&) (llvm-project/build/bin/clang+++0x109284c) #9 0x0000562faf826cc6 main (llvm-project/build/bin/clang+++0xf92cc6) #10 0x00007fcbf6699083 __libc_start_main /build/glibc-LcI20x/glibc-2.31/csu/../csu/libc-start.c:342:3 #11 0x0000562faf923a5e _start (llvm-project/build/bin/clang+++0x108fa5e) [1] 2628042 segmentation fault (core dumped) main.cpp -fopenmp=libomp -fopenmp-targets=powerpc64le-ibm-linux-gnu -o ```

llvm#118923) …d reentry. These utilities provide new, more generic and easier to use support for lazy compilation in ORC. LazyReexportsManager is an alternative to LazyCallThroughManager. It takes requests for lazy re-entry points in the form of an alias map: lazy-reexports = { ( <entry point symbol #1>, <implementation symbol #1> ), ( <entry point symbol #2>, <implementation symbol #2> ), ... ( <entry point symbol #n>, <implementation symbol #n> ) } LazyReexportsManager then: 1. binds the entry points to the implementation names in an internal table. 2. creates a JIT re-entry trampoline for each entry point. 3. creates a redirectable symbol for each of the entry point name and binds redirectable symbol to the corresponding reentry trampoline. When an entry point symbol is first called at runtime (which may be on any thread of the JIT'd program) it will re-enter the JIT via the trampoline and trigger a lookup for the implementation symbol stored in LazyReexportsManager's internal table. When the lookup completes the entry point symbol will be updated (via the RedirectableSymbolManager) to point at the implementation symbol, and execution will proceed to the implementation symbol. Actual construction of the re-entry trampolines and redirectable symbols is delegated to an EmitTrampolines functor and the RedirectableSymbolsManager respectively. JITLinkReentryTrampolines.h provides a JITLink-based implementation of the EmitTrampolines functor. (AArch64 only in this patch, but other architectures will be added in the near future). Register state save and reentry functionality is added to the ORC runtime in the __orc_rt_sysv_resolve and __orc_rt_resolve_implementation functions (the latter is generic, the former will need custom implementations for each ABI and architecture to be supported, however this should be much less effort than the existing OrcABISupport approach, since the ORC runtime allows this code to be written as native assembly). The resulting system: 1. Works equally well for in-process and out-of-process JIT'd code. 2. Requires less boilerplate to set up. Given an ObjectLinkingLayer and PlatformJD (JITDylib containing the ORC runtime), setup is just: ```c++ auto RSMgr = JITLinkRedirectableSymbolManager::Create(OLL); if (!RSMgr) return RSMgr.takeError(); auto LRMgr = createJITLinkLazyReexportsManager(OLL, **RSMgr, PlatformJD); if (!LRMgr) return LRMgr.takeError(); ``` after which lazy reexports can be introduced with: ```c++ JD.define(lazyReexports(LRMgr, <alias map>)); ``` LazyObectLinkingLayer is updated to use this new method, but the LLVM-IR level CompileOnDemandLayer will continue to use LazyCallThroughManager and OrcABISupport until the new system supports a wider range of architectures and ABIs. The llvm-jitlink utility's -lazy option now uses the new scheme. Since it depends on the ORC runtime, the lazy-link.ll testcase and associated helpers are moved to the ORC runtime.

The Clang binary (and any binary linking Clang as a library), when built using PIE, ends up with a pretty shocking number of dynamic relocations to apply to the executable image: roughly 400k. Each of these takes up binary space in the executable, and perhaps most interestingly takes start-up time to apply the relocations. The largest pattern I identified were the strings used to describe target builtins. The addresses of these string literals were stored into huge arrays, each one requiring a dynamic relocation. The way to avoid this is to design the target builtins to use a single large table of strings and offsets within the table for the individual strings. This switches the builtin management to such a scheme. This saves over 100k dynamic relocations by my measurement, an over 25% reduction. Just looking at byte size improvements, using the `bloaty` tool to compare a newly built `clang` binary to an old one: ``` FILE SIZE VM SIZE -------------- -------------- +1.4% +653Ki +1.4% +653Ki .rodata +0.0% +960 +0.0% +960 .text +0.0% +197 +0.0% +197 .dynstr +0.0% +184 +0.0% +184 .eh_frame +0.0% +96 +0.0% +96 .dynsym +0.0% +40 +0.0% +40 .eh_frame_hdr +114% +32 [ = ] 0 [Unmapped] +0.0% +20 +0.0% +20 .gnu.hash +0.0% +8 +0.0% +8 .gnu.version +0.9% +7 +0.9% +7 [LOAD #2 [R]] [ = ] 0 -75.4% -3.00Ki .relro_padding -16.1% -802Ki -16.1% -802Ki .data.rel.ro -27.3% -2.52Mi -27.3% -2.52Mi .rela.dyn -1.6% -2.66Mi -1.6% -2.66Mi TOTAL ``` We get a 16% reduction in the `.data.rel.ro` section, and nearly 30% reduction in `.rela.dyn` where those reloctaions are stored. This is also visible in my benchmarking of binary start-up overhead at least: ``` Benchmark 1: ./old_clang --version Time (mean ± σ): 17.6 ms ± 1.5 ms [User: 4.1 ms, System: 13.3 ms] Range (min … max): 14.2 ms … 22.8 ms 162 runs Benchmark 2: ./new_clang --version Time (mean ± σ): 15.5 ms ± 1.4 ms [User: 3.6 ms, System: 11.8 ms] Range (min … max): 12.4 ms … 20.3 ms 216 runs Summary './new_clang --version' ran 1.13 ± 0.14 times faster than './old_clang --version' ``` We get about 2ms faster `--version` runs. While there is a lot of noise in binary execution time, this delta is pretty consistent, and represents over 10% improvement. This is particularly interesting to me because for very short source files, repeatedly starting the `clang` binary is actually the dominant cost. For example, `configure` scripts running against the `clang` compiler are slow in large part because of binary start up time, not the time to process the actual inputs to the compiler. ---- This PR implements the string tables using `constexpr` code and the existing macro system. I understand that the builtins are moving towards a TableGen model, and if complete that would provide more options for modeling this. Unfortunately, that migration isn't complete, and even the parts that are migrated still rely on the ability to break out of the TableGen model and directly expand an X-macro style `BUILTIN(...)` textually. I looked at trying to complete the move to TableGen, but it would both require the difficult migration of the remaining targets, and solving some tricky problems with how to move away from any macro-based expansion. I was also able to find a reasonably clean and effective way of doing this with the existing macros and some `constexpr` code that I think is clean enough to be a pretty good intermediate state, and maybe give a good target for the eventual TableGen solution. I was also able to factor the macros into set of consistent patterns that avoids a significant regression in overall boilerplate.

cor3ntin merged this pull request into main Sep 5, 2023

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

[Github] Improve automatic new issue labelling #2

[Github] Improve automatic new issue labelling #2

cor3ntin commented Sep 5, 2023

[Github] Improve automatic new issue labelling #2

[Github] Improve automatic new issue labelling #2

Conversation

cor3ntin commented Sep 5, 2023