Merge tag 'mac80211-next-for-davem-2015-10-21' of git://git.kernel.or…

…g/pub/scm/linux/kernel/git/jberg/mac80211-next

Johannes Berg says:

====================
Here's another set of patches for the current cycle:
 * I merged net-next back to avoid a conflict with the
 * cfg80211 scheduled scan API extensions
 * preparations for better scan result timestamping
 * regulatory cleanups
 * mac80211 statistics cleanups
 * a few other small cleanups and fixes
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Documentation/DocBook/80211.tmpl

@@ -154,8 +154,9 @@
 !Finclude/net/cfg80211.h cfg80211_scan_request
 !Finclude/net/cfg80211.h cfg80211_scan_done
 !Finclude/net/cfg80211.h cfg80211_bss
-!Finclude/net/cfg80211.h cfg80211_inform_bss_width_frame
-!Finclude/net/cfg80211.h cfg80211_inform_bss_width
+!Finclude/net/cfg80211.h cfg80211_inform_bss
+!Finclude/net/cfg80211.h cfg80211_inform_bss_frame_data
+!Finclude/net/cfg80211.h cfg80211_inform_bss_data
 !Finclude/net/cfg80211.h cfg80211_unlink_bss
 !Finclude/net/cfg80211.h cfg80211_find_ie
 !Finclude/net/cfg80211.h ieee80211_bss_get_ie

drivers/net/wireless/ath/ath6kl/cfg80211.c

@@ -3312,7 +3312,7 @@ static int ath6kl_cfg80211_sscan_start(struct wiphy *wiphy,
 	}
 
 	/* fw uses seconds, also make sure that it's >0 */
-	interval = max_t(u16, 1, request->interval / 1000);
+	interval = max_t(u16, 1, request->scan_plans[0].interval);
 
 	ath6kl_wmi_scanparams_cmd(ar->wmi, vif->fw_vif_idx,
 				  interval, interval,

drivers/net/wireless/iwlwifi/mvm/ops.c

@@ -630,6 +630,7 @@ static void iwl_op_mode_mvm_stop(struct iwl_op_mode *op_mode)
 	kfree(mvm->d3_resume_sram);
 	if (mvm->nd_config) {
 		kfree(mvm->nd_config->match_sets);
+		kfree(mvm->nd_config->scan_plans);
 		kfree(mvm->nd_config);
 		mvm->nd_config = NULL;
 	}

drivers/net/wireless/iwlwifi/mvm/scan.c

@@ -1271,12 +1271,12 @@ int iwl_mvm_sched_scan_start(struct iwl_mvm *mvm,
 
 	params.type = iwl_mvm_get_scan_type(mvm, vif, &params);
 
-	if (req->interval > U16_MAX) {
+	if (req->scan_plans[0].interval > U16_MAX) {
 		IWL_DEBUG_SCAN(mvm,
 			       "interval value is > 16-bits, set to max possible\n");
 		params.interval = U16_MAX;
 	} else {
-		params.interval = req->interval / MSEC_PER_SEC;
+		params.interval = req->scan_plans[0].interval;
 	}
 
 	/* In theory, LMAC scans can handle a 32-bit delay, but since

drivers/net/wireless/rt2x00/rt2x00config.c

@@ -266,7 +266,7 @@ void rt2x00lib_config(struct rt2x00_dev *rt2x00dev,
 		if (beacon_diff > beacon_int)
 			beacon_diff = 0;
 
-		autowake_timeout = (conf->max_sleep_period * beacon_int) - beacon_diff;
+		autowake_timeout = (conf->ps_dtim_period * beacon_int) - beacon_diff;
 		queue_delayed_work(rt2x00dev->workqueue,
 				   &rt2x00dev->autowakeup_work,
 				   autowake_timeout - 15);

drivers/net/wireless/ti/wl12xx/scan.c

@@ -350,7 +350,8 @@ int wl1271_scan_sched_scan_config(struct wl1271 *wl,
 	cfg->bss_type = SCAN_BSS_TYPE_ANY;
 	/* currently NL80211 supports only a single interval */
 	for (i = 0; i < SCAN_MAX_CYCLE_INTERVALS; i++)
-		cfg->intervals[i] = cpu_to_le32(req->interval);
+		cfg->intervals[i] = cpu_to_le32(req->scan_plans[0].interval *
+						MSEC_PER_SEC);
 
 	cfg->ssid_len = 0;
 	ret = wlcore_scan_sched_scan_ssid_list(wl, wlvif, req);

drivers/net/wireless/ti/wl18xx/scan.c

@@ -228,13 +228,15 @@ int wl18xx_scan_sched_scan_config(struct wl1271 *wl,
 	wl18xx_adjust_channels(cmd, cmd_channels);
 
 	if (c->num_short_intervals && c->long_interval &&
-	    c->long_interval > req->interval) {
-		cmd->short_cycles_msec = cpu_to_le16(req->interval);
+	    c->long_interval > req->scan_plans[0].interval * MSEC_PER_SEC) {
+		cmd->short_cycles_msec =
+			cpu_to_le16(req->scan_plans[0].interval * MSEC_PER_SEC);
 		cmd->long_cycles_msec = cpu_to_le16(c->long_interval);
 		cmd->short_cycles_count = c->num_short_intervals;
 	} else {
 		cmd->short_cycles_msec = 0;
-		cmd->long_cycles_msec = cpu_to_le16(req->interval);
+		cmd->long_cycles_msec =
+			cpu_to_le16(req->scan_plans[0].interval * MSEC_PER_SEC);
 		cmd->short_cycles_count = 0;
 	}
 	wl1271_debug(DEBUG_SCAN, "short_interval: %d, long_interval: %d, num_short: %d",

include/linux/ieee80211.h

@@ -1932,6 +1932,8 @@ enum ieee80211_category {
 	WLAN_CATEGORY_HT = 7,
 	WLAN_CATEGORY_SA_QUERY = 8,
 	WLAN_CATEGORY_PROTECTED_DUAL_OF_ACTION = 9,
+	WLAN_CATEGORY_WNM = 10,
+	WLAN_CATEGORY_WNM_UNPROTECTED = 11,
 	WLAN_CATEGORY_TDLS = 12,
 	WLAN_CATEGORY_MESH_ACTION = 13,
 	WLAN_CATEGORY_MULTIHOP_ACTION = 14,
@@ -2396,7 +2398,10 @@ static inline bool _ieee80211_is_robust_mgmt_frame(struct ieee80211_hdr *hdr)
 		category = ((u8 *) hdr) + 24;
 		return *category != WLAN_CATEGORY_PUBLIC &&
 			*category != WLAN_CATEGORY_HT &&
+			*category != WLAN_CATEGORY_WNM_UNPROTECTED &&
 			*category != WLAN_CATEGORY_SELF_PROTECTED &&
+			*category != WLAN_CATEGORY_UNPROT_DMG &&
+			*category != WLAN_CATEGORY_VHT &&
 			*category != WLAN_CATEGORY_VENDOR_SPECIFIC;
 	}
 

include/net/cfg80211.h

@@ -5,6 +5,7 @@
  *
  * Copyright 2006-2010	Johannes Berg <johannes@sipsolutions.net>
  * Copyright 2013-2014 Intel Mobile Communications GmbH
+ * Copyright 2015	Intel Deutschland GmbH
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -1500,14 +1501,27 @@ struct cfg80211_match_set {
 	s32 rssi_thold;
 };
 
+/**
+ * struct cfg80211_sched_scan_plan - scan plan for scheduled scan
+ *
+ * @interval: interval between scheduled scan iterations. In seconds.
+ * @iterations: number of scan iterations in this scan plan. Zero means
+ *	infinite loop.
+ *	The last scan plan will always have this parameter set to zero,
+ *	all other scan plans will have a finite number of iterations.
+ */
+struct cfg80211_sched_scan_plan {
+	u32 interval;
+	u32 iterations;
+};
+
 /**
  * struct cfg80211_sched_scan_request - scheduled scan request description
  *
  * @ssids: SSIDs to scan for (passed in the probe_reqs in active scans)
  * @n_ssids: number of SSIDs
  * @n_channels: total number of channels to scan
  * @scan_width: channel width for scanning
- * @interval: interval between each scheduled scan cycle
  * @ie: optional information element(s) to add into Probe Request or %NULL
  * @ie_len: length of ie in octets
  * @flags: bit field of flags controlling operation
@@ -1526,6 +1540,9 @@ struct cfg80211_match_set {
  * @mac_addr_mask: MAC address mask used with randomisation, bits that
  *	are 0 in the mask should be randomised, bits that are 1 should
  *	be taken from the @mac_addr
+ * @scan_plans: scan plans to be executed in this scheduled scan. Lowest
+ *	index must be executed first.
+ * @n_scan_plans: number of scan plans, at least 1.
  * @rcu_head: RCU callback used to free the struct
  * @owner_nlportid: netlink portid of owner (if this should is a request
  *	owned by a particular socket)
@@ -1539,14 +1556,15 @@ struct cfg80211_sched_scan_request {
 	int n_ssids;
 	u32 n_channels;
 	enum nl80211_bss_scan_width scan_width;
-	u32 interval;
 	const u8 *ie;
 	size_t ie_len;
 	u32 flags;
 	struct cfg80211_match_set *match_sets;
 	int n_match_sets;
 	s32 min_rssi_thold;
 	u32 delay;
+	struct cfg80211_sched_scan_plan *scan_plans;
+	int n_scan_plans;
 
 	u8 mac_addr[ETH_ALEN] __aligned(2);
 	u8 mac_addr_mask[ETH_ALEN] __aligned(2);
@@ -1575,6 +1593,26 @@ enum cfg80211_signal_type {
 	CFG80211_SIGNAL_TYPE_UNSPEC,
 };
 
+/**
+ * struct cfg80211_inform_bss - BSS inform data
+ * @chan: channel the frame was received on
+ * @scan_width: scan width that was used
+ * @signal: signal strength value, according to the wiphy's
+ *	signal type
+ * @boottime_ns: timestamp (CLOCK_BOOTTIME) when the information was
+ *	received; should match the time when the frame was actually
+ *	received by the device (not just by the host, in case it was
+ *	buffered on the device) and be accurate to about 10ms.
+ *	If the frame isn't buffered, just passing the return value of
+ *	ktime_get_boot_ns() is likely appropriate.
+ */
+struct cfg80211_inform_bss {
+	struct ieee80211_channel *chan;
+	enum nl80211_bss_scan_width scan_width;
+	s32 signal;
+	u64 boottime_ns;
+};
+
 /**
  * struct cfg80211_bss_ie_data - BSS entry IE data
  * @tsf: TSF contained in the frame that carried these IEs
@@ -3056,6 +3094,12 @@ struct wiphy_vendor_command {
  *	include fixed IEs like supported rates
  * @max_sched_scan_ie_len: same as max_scan_ie_len, but for scheduled
  *	scans
+ * @max_sched_scan_plans: maximum number of scan plans (scan interval and number
+ *	of iterations) for scheduled scan supported by the device.
+ * @max_sched_scan_plan_interval: maximum interval (in seconds) for a
+ *	single scan plan supported by the device.
+ * @max_sched_scan_plan_iterations: maximum number of iterations for a single
+ *	scan plan supported by the device.
  * @coverage_class: current coverage class
  * @fw_version: firmware version for ethtool reporting
  * @hw_version: hardware version for ethtool reporting
@@ -3163,6 +3207,9 @@ struct wiphy {
 	u8 max_match_sets;
 	u16 max_scan_ie_len;
 	u16 max_sched_scan_ie_len;
+	u32 max_sched_scan_plans;
+	u32 max_sched_scan_plan_interval;
+	u32 max_sched_scan_plan_iterations;
 
 	int n_cipher_suites;
 	const u32 *cipher_suites;
@@ -3958,14 +4005,11 @@ void cfg80211_sched_scan_stopped(struct wiphy *wiphy);
 void cfg80211_sched_scan_stopped_rtnl(struct wiphy *wiphy);
 
 /**
- * cfg80211_inform_bss_width_frame - inform cfg80211 of a received BSS frame
- *
+ * cfg80211_inform_bss_frame_data - inform cfg80211 of a received BSS frame
  * @wiphy: the wiphy reporting the BSS
- * @rx_channel: The channel the frame was received on
- * @scan_width: width of the control channel
+ * @data: the BSS metadata
  * @mgmt: the management frame (probe response or beacon)
  * @len: length of the management frame
- * @signal: the signal strength, type depends on the wiphy's signal_type
  * @gfp: context flags
  *
  * This informs cfg80211 that BSS information was found and
@@ -3975,21 +4019,40 @@ void cfg80211_sched_scan_stopped_rtnl(struct wiphy *wiphy);
  * Or %NULL on error.
  */
 struct cfg80211_bss * __must_check
+cfg80211_inform_bss_frame_data(struct wiphy *wiphy,
+			       struct cfg80211_inform_bss *data,
+			       struct ieee80211_mgmt *mgmt, size_t len,
+			       gfp_t gfp);
+
+static inline struct cfg80211_bss * __must_check
 cfg80211_inform_bss_width_frame(struct wiphy *wiphy,
 				struct ieee80211_channel *rx_channel,
 				enum nl80211_bss_scan_width scan_width,
 				struct ieee80211_mgmt *mgmt, size_t len,
-				s32 signal, gfp_t gfp);
+				s32 signal, gfp_t gfp)
+{
+	struct cfg80211_inform_bss data = {
+		.chan = rx_channel,
+		.scan_width = scan_width,
+		.signal = signal,
+	};
+
+	return cfg80211_inform_bss_frame_data(wiphy, &data, mgmt, len, gfp);
+}
 
 static inline struct cfg80211_bss * __must_check
 cfg80211_inform_bss_frame(struct wiphy *wiphy,
 			  struct ieee80211_channel *rx_channel,
 			  struct ieee80211_mgmt *mgmt, size_t len,
 			  s32 signal, gfp_t gfp)
 {
-	return cfg80211_inform_bss_width_frame(wiphy, rx_channel,
-					       NL80211_BSS_CHAN_WIDTH_20,
-					       mgmt, len, signal, gfp);
+	struct cfg80211_inform_bss data = {
+		.chan = rx_channel,
+		.scan_width = NL80211_BSS_CHAN_WIDTH_20,
+		.signal = signal,
+	};
+
+	return cfg80211_inform_bss_frame_data(wiphy, &data, mgmt, len, gfp);
 }
 
 /**
@@ -4006,19 +4069,17 @@ enum cfg80211_bss_frame_type {
 };
 
 /**
- * cfg80211_inform_bss_width - inform cfg80211 of a new BSS
+ * cfg80211_inform_bss_data - inform cfg80211 of a new BSS
  *
  * @wiphy: the wiphy reporting the BSS
- * @rx_channel: The channel the frame was received on
- * @scan_width: width of the control channel
+ * @data: the BSS metadata
  * @ftype: frame type (if known)
  * @bssid: the BSSID of the BSS
  * @tsf: the TSF sent by the peer in the beacon/probe response (or 0)
  * @capability: the capability field sent by the peer
  * @beacon_interval: the beacon interval announced by the peer
  * @ie: additional IEs sent by the peer
  * @ielen: length of the additional IEs
- * @signal: the signal strength, type depends on the wiphy's signal_type
  * @gfp: context flags
  *
  * This informs cfg80211 that BSS information was found and
@@ -4028,13 +4089,32 @@ enum cfg80211_bss_frame_type {
  * Or %NULL on error.
  */
 struct cfg80211_bss * __must_check
+cfg80211_inform_bss_data(struct wiphy *wiphy,
+			 struct cfg80211_inform_bss *data,
+			 enum cfg80211_bss_frame_type ftype,
+			 const u8 *bssid, u64 tsf, u16 capability,
+			 u16 beacon_interval, const u8 *ie, size_t ielen,
+			 gfp_t gfp);
+
+static inline struct cfg80211_bss * __must_check
 cfg80211_inform_bss_width(struct wiphy *wiphy,
 			  struct ieee80211_channel *rx_channel,
 			  enum nl80211_bss_scan_width scan_width,
 			  enum cfg80211_bss_frame_type ftype,
 			  const u8 *bssid, u64 tsf, u16 capability,
 			  u16 beacon_interval, const u8 *ie, size_t ielen,
-			  s32 signal, gfp_t gfp);
+			  s32 signal, gfp_t gfp)
+{
+	struct cfg80211_inform_bss data = {
+		.chan = rx_channel,
+		.scan_width = scan_width,
+		.signal = signal,
+	};
+
+	return cfg80211_inform_bss_data(wiphy, &data, ftype, bssid, tsf,
+					capability, beacon_interval, ie, ielen,
+					gfp);
+}
 
 static inline struct cfg80211_bss * __must_check
 cfg80211_inform_bss(struct wiphy *wiphy,
@@ -4044,11 +4124,15 @@ cfg80211_inform_bss(struct wiphy *wiphy,
 		    u16 beacon_interval, const u8 *ie, size_t ielen,
 		    s32 signal, gfp_t gfp)
 {
-	return cfg80211_inform_bss_width(wiphy, rx_channel,
-					 NL80211_BSS_CHAN_WIDTH_20, ftype,
-					 bssid, tsf, capability,
-					 beacon_interval, ie, ielen, signal,
-					 gfp);
+	struct cfg80211_inform_bss data = {
+		.chan = rx_channel,
+		.scan_width = NL80211_BSS_CHAN_WIDTH_20,
+		.signal = signal,
+	};
+
+	return cfg80211_inform_bss_data(wiphy, &data, ftype, bssid, tsf,
+					capability, beacon_interval, ie, ielen,
+					gfp);
 }
 
 struct cfg80211_bss *cfg80211_get_bss(struct wiphy *wiphy,

include/net/mac80211.h

@@ -1241,11 +1241,6 @@ enum ieee80211_smps_mode {
  * @flags: configuration flags defined above
  *
  * @listen_interval: listen interval in units of beacon interval
- * @max_sleep_period: the maximum number of beacon intervals to sleep for
- *	before checking the beacon for a TIM bit (managed mode only); this
- *	value will be only achievable between DTIM frames, the hardware
- *	needs to check for the multicast traffic bit in DTIM beacons.
- *	This variable is valid only when the CONF_PS flag is set.
  * @ps_dtim_period: The DTIM period of the AP we're connected to, for use
  *	in power saving. Power saving will not be enabled until a beacon
  *	has been received and the DTIM period is known.
@@ -1275,7 +1270,6 @@ enum ieee80211_smps_mode {
 struct ieee80211_conf {
 	u32 flags;
 	int power_level, dynamic_ps_timeout;
-	int max_sleep_period;
 
 	u16 listen_interval;
 	u8 ps_dtim_period;
@@ -1683,6 +1677,7 @@ struct ieee80211_sta_rates {
  * @tdls: indicates whether the STA is a TDLS peer
  * @tdls_initiator: indicates the STA is an initiator of the TDLS link. Only
  *	valid if the STA is a TDLS peer in the first place.
+ * @mfp: indicates whether the STA uses management frame protection or not.
  * @txq: per-TID data TX queues (if driver uses the TXQ abstraction)
  */
 struct ieee80211_sta {
@@ -1700,6 +1695,7 @@ struct ieee80211_sta {
 	struct ieee80211_sta_rates __rcu *rates;
 	bool tdls;
 	bool tdls_initiator;
+	bool mfp;
 
 	struct ieee80211_txq *txq[IEEE80211_NUM_TIDS];