Skip to content

Update Obj-C and Swift wrappers. (#1020) (#1055) #1342

Update Obj-C and Swift wrappers. (#1020) (#1055)

Update Obj-C and Swift wrappers. (#1020) (#1055) #1342

Workflow file for this run

name: Themis Core
on:
pull_request:
paths:
- '.github/workflows/test-core.yaml'
- 'benches/themis/**'
- 'docs/examples/c/**'
- 'src/soter/**'
- 'src/themis/**'
- 'tests/common/**'
- 'tests/soter/**'
- 'tests/themis/**'
- '!tests/themis/wrappers/android/**'
- 'third_party/boringssl/src/**'
- 'tools/afl/**'
- '**/*.mk'
- 'Makefile'
- '!**/README*'
push:
branches:
- master
- stable
- release/*
schedule:
- cron: '20 6 * * 1' # every Monday at 6:20 UTC
env:
WITH_FATAL_WARNINGS: yes
# RNG tests tend to fail in virtualized environment due to /dev/random
# not behaving properly. Disable them to avoid spurious failures.
NO_NIST_STS: 1
jobs:
unit-tests:
name: Unit tests
runs-on: ${{ matrix.os }}
env:
VERBOSE: 1
SOTER_KDF_RUN_LONG_TESTS: yes
MATRIX_OS: ${{ matrix.os }}
strategy:
matrix:
os: [ubuntu-20.04, ubuntu-22.04, macos-12]
fail-fast: false
steps:
- name: Install system dependencies
run: |
if [[ "$(uname)" = "Darwin" ]]
then
brew install cmake ninja openssl@1.1 openssl@3
else
sudo sh -c 'echo "DEBIAN_FRONTEND=noninteractive" >> /etc/environment'
sudo apt update
sudo apt install --yes gcc make libssl-dev cmake ninja-build
fi
- name: Check out code
uses: actions/checkout@v2
with:
submodules: true
- name: Build Themis Core (OpenSSL)
run: make prepare_tests_basic ENGINE=openssl BUILD_PATH=build-openssl
- name: Build Themis Core (OpenSSL 3.0)
if: ${{ matrix.os != 'ubuntu-20.04' }}
run: |
export ENGINE=openssl
# macOS has both OpenSSL 1.1.1 and 3.0 installed, be specific.
if [[ "$MATRIX_OS" = "macos-12" ]]; then
openssl3="$(brew --prefix openssl@3)"
export ENGINE_INCLUDE_PATH="$openssl3/include"
export ENGINE_LIB_PATH="$openssl3/lib"
fi
make prepare_tests_basic BUILD_PATH=build-openssl-3.0
- name: Build Themis Core (BoringSSL)
if: always()
run: make prepare_tests_basic ENGINE=boringssl BUILD_PATH=build-boringssl
- name: Build Themis Core (WITH_SCELL_COMPAT)
run: make prepare_tests_basic WITH_SCELL_COMPAT=yes BUILD_PATH=build-compat
- name: Run test suite (OpenSSL)
run: make test ENGINE=openssl BUILD_PATH=build-openssl
- name: Run test suite (OpenSSL, uncompressed keys)
env:
THEMIS_GEN_EC_KEY_PAIR_UNCOMPRESSED: "1"
run: make test ENGINE=openssl BUILD_PATH=build-openssl
- name: Run test suite (OpenSSL 3.0)
if: ${{ matrix.os != 'ubuntu-20.04' }}
run: |
export ENGINE=openssl
# macOS has both OpenSSL 1.1.1 and 3.0 installed, be specific.
if [[ "$MATRIX_OS" = "macos-12" ]]; then
openssl3="$(brew --prefix openssl@3)"
export ENGINE_INCLUDE_PATH="$openssl3/include"
export ENGINE_LIB_PATH="$openssl3/lib"
fi
make test BUILD_PATH=build-openssl-3.0
- name: Run test suite (OpenSSL 3.0, uncompressed keys)
if: ${{ matrix.os != 'ubuntu-20.04' }}
env:
THEMIS_GEN_EC_KEY_PAIR_UNCOMPRESSED: "1"
run: |
export ENGINE=openssl
# macOS has both OpenSSL 1.1.1 and 3.0 installed, be specific.
if [[ "$MATRIX_OS" = "macos-12" ]]; then
openssl3="$(brew --prefix openssl@3)"
export ENGINE_INCLUDE_PATH="$openssl3/include"
export ENGINE_LIB_PATH="$openssl3/lib"
fi
make test BUILD_PATH=build-openssl-3.0
- name: Run test suite (BoringSSL)
if: always()
run: make test ENGINE=boringssl BUILD_PATH=build-boringssl
- name: Run test suite (BoringSSL, uncompressed keys)
if: always()
env:
THEMIS_GEN_EC_KEY_PAIR_UNCOMPRESSED: "1"
run: make test ENGINE=boringssl BUILD_PATH=build-boringssl
- name: Run test suite (WITH_SCELL_COMPAT)
run: make test WITH_SCELL_COMPAT=yes BUILD_PATH=build-compat
examples:
name: Code examples
runs-on: ubuntu-20.04
steps:
- name: Install system dependencies
run: |
sudo sh -c 'echo "DEBIAN_FRONTEND=noninteractive" >> /etc/environment'
sudo apt update
sudo apt install --yes gcc make libssl-dev
- name: Check out code
uses: actions/checkout@v2
- name: Install Themis Core
run: |
make
sudo make install
- name: Run examples
run: |
cd $GITHUB_WORKSPACE/docs/examples/c/session_buffer_test
echo "Secure Session: buffer interface"
cc -o session_buffer_test session_buffer_test.c -lthemis
./session_buffer_test
cd $GITHUB_WORKSPACE/docs/examples/c/ssession_test
echo "Secure Session: socket interface"
cc -o session_test client.c server.c session_test.c -lthemis -pthread
./session_test
sanitizers:
name: Unit tests (with sanitizers)
runs-on: ubuntu-20.04
env:
WITH_FATAL_SANITIZERS: yes
steps:
- name: Install system dependencies
run: |
sudo sh -c 'echo "DEBIAN_FRONTEND=noninteractive" >> /etc/environment'
sudo apt update
sudo apt install --yes gcc-10 libgcc-10-dev clang-8 make libssl-dev
- name: Check out code
uses: actions/checkout@v2
# We test only OpenSSL flavor to not expand the testing matrix too much
# (rebuilding BoringSSL is not fun and takes much time)
- name: Check with GCC (ASan)
if: always()
run: make clean test CC=gcc-10 WITH_ASAN=1
- name: Check with GCC (TSan)
if: always()
run: make clean test CC=gcc-10 WITH_TSAN=1
- name: Check with GCC (UBSan)
if: always()
run: make clean test CC=gcc-10 WITH_UBSAN=1
- name: Check with Clang (ASan)
if: always()
run: make clean test CC=clang-8 WITH_ASAN=1
- name: Check with Clang (TSan)
if: always()
run: make clean test CC=clang-8 WITH_TSAN=1
- name: Check with Clang (UBSan)
if: always()
run: make clean test CC=clang-8 WITH_UBSAN=1
benchmarks:
name: Benchmarks
runs-on: ubuntu-20.04
steps:
- name: Install system dependencies
run: |
sudo sh -c 'echo "DEBIAN_FRONTEND=noninteractive" >> /etc/environment'
sudo apt update
sudo apt install --yes gcc make libssl-dev gnuplot zip
- name: Install Rust toolchain (stable)
uses: actions-rs/toolchain@v1
with:
toolchain: stable
profile: minimal
- name: Check out code
uses: actions/checkout@v2
- name: Install Themis Core
run: |
make
sudo make install
# Cargo pulls in quite a few stuff from the Internet and Rust always
# (slowly) recompiles dependencies, so make heavy use of caching
- name: Cache Cargo registry
uses: actions/cache@v1
with:
path: ~/.cargo/registry
key: ${{ runner.os }}-cargo-registry-${{ hashFiles('**/Cargo.toml') }}
restore-keys: ${{ runner.os }}-cargo-registry-
- name: Cache Cargo index
uses: actions/cache@v1
with:
path: ~/.cargo/git
key: ${{ runner.os }}-cargo-index-${{ hashFiles('**/Cargo.toml') }}
restore-keys: ${{ runner.os }}-cargo-index-
- name: Cache Cargo build
uses: actions/cache@v1
with:
path: target
key: ${{ runner.os }}-cargo-build-target-${{ hashFiles('**/Cargo.toml') }}
restore-keys: ${{ runner.os }}-cargo-build-target-
# This can take a while on the first run, it's better with caches
- name: Build benchmarks
run: |
cd benches/themis
cargo bench --no-run
# TODO: if building a pull request, compare base with updates
- name: Benchmark Secure Cell (master key)
run: |
cd benches/themis
cargo bench -- '^Secure Cell .* master key/4 KB'
- name: Benchmark Secure Cell (passphrase)
run: |
cd benches/themis
# These are awfully slow due to KDF
cargo bench -- '^Secure Cell .* passphrase/4 KB' --sample-size 10
- name: Benchmark Secure Message (RSA)
run: |
cd benches/themis
cargo bench -- '^Secure Message .* - RSA/4 KB'
- name: Benchmark Secure Message (ECDSA)
run: |
cd benches/themis
cargo bench -- '^Secure Message .* - ECDSA/4 KB'
- name: Upload benchmark report
uses: actions/upload-artifact@v1
with:
name: Criterion report
path: target/criterion
fuzzing:
name: AFL fuzzing
runs-on: ubuntu-20.04
env:
FUZZ_TIMEOUT: 30s
THEMIS_DEFAULT_PBKDF2_ITERATIONS: 10
WITH_FATAL_SANITIZERS: yes
steps:
- name: Install system dependencies
run: |
sudo sh -c 'echo "DEBIAN_FRONTEND=noninteractive" >> /etc/environment'
# 32-bit toolchain is required to run AFL with some sanitizers
sudo dpkg --add-architecture i386
sudo apt update
sudo apt install --yes gcc make zip \
afl++ gcc-multilib libc6-dev:i386 \
libssl-dev:amd64 libssl-dev:i386
# AFL needs proper core dumps to be available, write them to files
sudo sh -c 'echo core > /proc/sys/kernel/core_pattern'
- name: Check out code
uses: actions/checkout@v2
- name: Build fuzzing framework (Clang)
if: always()
run: make clean fuzz AFL_CC=afl-clang
- name: Build fuzzing framework (GCC)
if: always()
run: make clean fuzz AFL_CC=afl-gcc
# Don't run them for too long, we aim for low-hanging fruit here.
# Ideally we'd like to wait for AFL to make one cycle and stop.
- name: Fuzzing with Address Sanitizer
if: always()
run: |
make clean fuzz AFL_CC=afl-gcc WITH_ASAN=1
for tool in tools/afl/input/*
do
timeout -s INT "$FUZZ_TIMEOUT" \
make fuzz AFL_CC=afl-gcc WITH_ASAN=1 \
AFL_FUZZ="afl-fuzz -m 1024" \
FUZZ_BIN=$(basename $tool) \
| cat -u || true
done
# actions/upload-artifact cannot handle ":" in paths used by AFL,
# archive the report manually to prevent massive stalls
cd build/afl
zip -r results-asan.zip output
cd -
echo
echo Analyzing results...
echo
./tools/afl/analyze_crashes.sh --no-debugger
- name: Upload ASan results
if: always()
uses: actions/upload-artifact@v1
with:
name: Core fuzzer report (ASan)
path: build/afl/results-asan.zip
- name: Fuzzing with Undefined Behavior Sanitizer
if: always()
run: |
make clean fuzz AFL_CC=afl-clang WITH_UBSAN=1
for tool in tools/afl/input/*
do
timeout -s INT "$FUZZ_TIMEOUT" \
make fuzz AFL_CC=afl-clang WITH_UBSAN=1 \
FUZZ_BIN=$(basename $tool) \
| cat -u || true
done
# actions/upload-artifact cannot handle ":" in paths used by AFL,
# archive the report manually to prevent massive stalls
cd build/afl
zip -r results-ubsan.zip output
cd -
echo
echo Analyzing results...
echo
./tools/afl/analyze_crashes.sh --no-debugger
- name: Upload UBSan results
if: always()
uses: actions/upload-artifact@v1
with:
name: Core fuzzer report (UBSan)
path: build/afl/results-ubsan.zip
# TODO: 32-bit builds WITH_UBSAN=1
leak-check:
name: Memory leaks
runs-on: ubuntu-20.04
steps:
- name: Install system dependencies
run: |
sudo sh -c 'echo "DEBIAN_FRONTEND=noninteractive" >> /etc/environment'
sudo apt update
sudo apt install --yes gcc make libssl-dev valgrind ninja-build
- name: Check out code
uses: actions/checkout@v2
with:
submodules: true
- name: Build Themis Core
run: |
make prepare_tests_basic ENGINE=openssl BUILD_PATH=build_openssl
make prepare_tests_basic ENGINE=boringssl BUILD_PATH=build_boringssl
- name: Check for leaks (OpenSSL)
if: always()
run: |
cd build_openssl
valgrind tests/soter_test 2>&1 | tee -a valgrind-report.txt
valgrind tests/themis_test 2>&1 | tee -a valgrind-report.txt
awk '
/ERROR SUMMARY|(definitely|indirectly|possibly) lost/ { sum += $4 }
END { if (sum > 0) { exit 1 } }
' valgrind-report.txt
- name: Check for leaks (BoringSSL)
if: always()
run: |
cd build_boringssl
valgrind tests/soter_test 2>&1 | tee -a valgrind-report.txt
valgrind tests/themis_test 2>&1 | tee -a valgrind-report.txt
awk '
/ERROR SUMMARY|(definitely|indirectly|possibly) lost/ { sum += $4 }
END { if (sum > 0) { exit 1 } }
' valgrind-report.txt
coverage:
name: Unit test coverage
runs-on: ubuntu-20.04
steps:
- name: Install system dependencies
run: |
sudo sh -c 'echo "DEBIAN_FRONTEND=noninteractive" >> /etc/environment'
sudo apt update
sudo apt install --yes gcc make libssl-dev lcov
- name: Check out code
uses: actions/checkout@v2
- name: Build Themis Core
run: make prepare_tests_basic COVERAGE=y
- name: Reset lcov counters
run: lcov --directory . --zerocounters
- name: Run test suite
run: make test COVERAGE=y
- name: Prepare lcov data
run: |
lcov --output-file coverage.info --directory . --capture
# Do not include tests themselves as well as system headers
lcov --output-file coverage.info --remove coverage.info '*/tests/*' '/usr/*'
lcov --list coverage.info
- name: Submit results to Coveralls
uses: coverallsapp/github-action@master
with:
github-token: ${{ secrets.GITHUB_TOKEN }}
path-to-lcov: ./coverage.info
msys2:
name: MSYS2 environment
runs-on: windows-2022
env:
SOTER_KDF_RUN_LONG_TESTS: yes
# TODO: remove these two options when MSYS2 build issues are solved,
# because now PKGBUILD.MSYS2 just downloads latest release archive
# from GitHub instead of using checked out files
WITH_EXPERIMENTAL_OPENSSL_3_SUPPORT: yes
WITH_FATAL_WARNINGS: "no" # YAML :trollface:
defaults:
run:
shell: msys2 {0}
steps:
- name: Install MSYS2
uses: msys2/setup-msys2@v2
with:
install: >-
base-devel tar git gcc make
libopenssl>=3.0.0
openssl-devel>=3.0.0
mingw-w64-x86_64-nsis
# Git, I know you're only trying to help, but MSYS can work with
# UNIX line endings just fine. In fact, "makepkg" *requires* them.
# So don't be smart: just fetch the files as they are.
- name: Use UNIX line endings
shell: bash
run: git config --global core.autocrlf input
- name: Check out code
uses: actions/checkout@v2
# TODO: if there are users of the BoringSSL flavor on Windows,
# we should be testing that one as well
- name: Build Themis Core
run: make prepare_tests_basic
- name: Run test suite
run: make test
# TODO: it would be nice to test the installer too
- name: Build Themis installer
run: make nsis_installer
- name: Build Themis packages
run: makepkg -p PKGBUILD.MSYS2
- name: Install Themis packages
run: pacman -U --noconfirm themis-*.pkg.*
- name: Try building examples
run: |
cd $GITHUB_WORKSPACE/docs/examples/c/session_buffer_test
echo "Secure Session: buffer interface"
cc -o session_buffer_test session_buffer_test.c -lthemis
./session_buffer_test
cd $GITHUB_WORKSPACE/docs/examples/c/ssession_test
echo "Secure Session: socket interface"
cc -o session_test client.c server.c session_test.c -lthemis -pthread
./session_test
macos-cross-compile:
name: macOS cross toolchain
runs-on: macos-12
steps:
- name: Install system dependencies
run: |
brew install cmake ninja
- name: Check out code
uses: actions/checkout@v2
with:
submodules: true
# We can't test OpenSSL builds since this requires OpenSSL libraries
# built for the target architecture (and Homebrew doesn't have any).
#
# GitHub's virtual environemnts can change the default version of Xcode
# and that changes the available SDKs. Check the combinations here:
# https://github.com/actions/virtual-environments/blob/main/images/macos/macos-10.15-Readme.md#xcode
- name: Build Themis Core (BoringSSL, arm64)
run: make SDK=macosx13.1 ARCH=arm64 ENGINE=boringssl
# Of course we can't run unit tests either because there is no emulator.
# So I will be satisifed to see the build succeed and produce binaries
# with expected architecture.
- name: Check binary architecture
run: |
set -x
test $(lipo -archs build/libsoter.0.dylib) = arm64
test $(lipo -archs build/libthemis.0.dylib) = arm64